drivers/parisc/eisa.c

   1 /*
   2  * eisa.c - provide support for EISA adapters in PA-RISC machines
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * as published by the Free Software Foundation; either version
   7  * 2 of the License, or (at your option) any later version.
   8  *
   9  * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard
  10  * Copyright (c) 2001 Daniel Engstrom <5116@telia.com>
  11  *
  12  * There are two distinct EISA adapters.  Mongoose is found in machines
  13  * before the 712; then the Wax ASIC is used.  To complicate matters, the
  14  * Wax ASIC also includes a PS/2 and RS-232 controller, but those are
  15  * dealt with elsewhere; this file is concerned only with the EISA portions
  16  * of Wax.
  17  *
  18  *
  19  * HINT:
  20  * -----
  21  * To allow an ISA card to work properly in the EISA slot you need to
  22  * set an edge trigger level. This may be done on the palo command line
  23  * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with
  24  * n and n2 as the irq levels you want to use.
  25  *
  26  * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at
  27  * irq levels 10 and 11.
  28  */
  29
  30 #include <linux/init.h>
  31 #include <linux/ioport.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/kernel.h>
  34 #include <linux/module.h>
  35 #include <linux/pci.h>
  36 #include <linux/sched.h>
  37 #include <linux/spinlock.h>
  38 #include <linux/eisa.h>
  39
  40 #include <asm/byteorder.h>
  41 #include <asm/io.h>
  42 #include <asm/hardware.h>
  43 #include <asm/processor.h>
  44 #include <asm/parisc-device.h>
  45 #include <asm/delay.h>
  46 #include <asm/eisa_bus.h>
  47 #include <asm/eisa_eeprom.h>
  48
  49 #if 0
  50 #define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg )
  51 #else
  52 #define EISA_DBG(msg, arg... )
  53 #endif
  54
  55 #define SNAKES_EEPROM_BASE_ADDR 0xF0810400
  56 #define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400
  57
  58 static DEFINE_SPINLOCK(eisa_irq_lock);
  59
  60 void __iomem *eisa_eeprom_addr __read_mostly;
  61
  62 /* We can only have one EISA adapter in the system because neither
  63  * implementation can be flexed.
  64  */
  65 static struct eisa_ba {
  66         struct pci_hba_data     hba;
  67         unsigned long eeprom_addr;
  68         struct eisa_root_device root;
  69 } eisa_dev;
  70
  71 /* Port ops */
  72
  73 static inline unsigned long eisa_permute(unsigned short port)
  74 {
  75         if (port & 0x300) {
  76                 return 0xfc000000 | ((port & 0xfc00) >> 6)
  77                         | ((port & 0x3f8) << 9) | (port & 7);
  78         } else {
  79                 return 0xfc000000 | port;
  80         }
  81 }
  82
  83 unsigned char eisa_in8(unsigned short port)
  84 {
  85         if (EISA_bus)
  86                 return gsc_readb(eisa_permute(port));
  87         return 0xff;
  88 }
  89
  90 unsigned short eisa_in16(unsigned short port)
  91 {
  92         if (EISA_bus)
  93                 return le16_to_cpu(gsc_readw(eisa_permute(port)));
  94         return 0xffff;
  95 }
  96
  97 unsigned int eisa_in32(unsigned short port)
  98 {
  99         if (EISA_bus)
 100                 return le32_to_cpu(gsc_readl(eisa_permute(port)));
 101         return 0xffffffff;
 102 }
 103
 104 void eisa_out8(unsigned char data, unsigned short port)
 105 {
 106         if (EISA_bus)
 107                 gsc_writeb(data, eisa_permute(port));
 108 }
 109
 110 void eisa_out16(unsigned short data, unsigned short port)
 111 {
 112         if (EISA_bus)
 113                 gsc_writew(cpu_to_le16(data), eisa_permute(port));
 114 }
 115
 116 void eisa_out32(unsigned int data, unsigned short port)
 117 {
 118         if (EISA_bus)
 119                 gsc_writel(cpu_to_le32(data), eisa_permute(port));
 120 }
 121
 122 #ifndef CONFIG_PCI
 123 /* We call these directly without PCI.  See asm/io.h. */
 124 EXPORT_SYMBOL(eisa_in8);
 125 EXPORT_SYMBOL(eisa_in16);
 126 EXPORT_SYMBOL(eisa_in32);
 127 EXPORT_SYMBOL(eisa_out8);
 128 EXPORT_SYMBOL(eisa_out16);
 129 EXPORT_SYMBOL(eisa_out32);
 130 #endif
 131
 132 /* Interrupt handling */
 133
 134 /* cached interrupt mask registers */
 135 static int master_mask;
 136 static int slave_mask;
 137
 138 /* the trig level can be set with the
 139  * eisa_irq_edge=n,n,n commandline parameter
 140  * We should really read this from the EEPROM
 141  * in the furure.
 142  */
 143 /* irq 13,8,2,1,0 must be edge */
 144 static unsigned int eisa_irq_level __read_mostly; /* default to edge triggered */
 145
 146
 147 /* called by free irq */
 148 static void eisa_disable_irq(unsigned int irq)
 149 {
 150         unsigned long flags;
 151
 152         EISA_DBG("disable irq %d\n", irq);
 153         /* just mask for now */
 154         spin_lock_irqsave(&eisa_irq_lock, flags);
 155         if (irq & 8) {
 156                 slave_mask |= (1 << (irq&7));
 157                 eisa_out8(slave_mask, 0xa1);
 158         } else {
 159                 master_mask |= (1 << (irq&7));
 160                 eisa_out8(master_mask, 0x21);
 161         }
 162         spin_unlock_irqrestore(&eisa_irq_lock, flags);
 163         EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
 164         EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
 165 }
 166
 167 /* called by request irq */
 168 static void eisa_enable_irq(unsigned int irq)
 169 {
 170         unsigned long flags;
 171         EISA_DBG("enable irq %d\n", irq);
 172
 173         spin_lock_irqsave(&eisa_irq_lock, flags);
 174         if (irq & 8) {
 175                 slave_mask &= ~(1 << (irq&7));
 176                 eisa_out8(slave_mask, 0xa1);
 177         } else {
 178                 master_mask &= ~(1 << (irq&7));
 179                 eisa_out8(master_mask, 0x21);
 180         }
 181         spin_unlock_irqrestore(&eisa_irq_lock, flags);
 182         EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
 183         EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
 184 }
 185
 186 static unsigned int eisa_startup_irq(unsigned int irq)
 187 {
 188         eisa_enable_irq(irq);
 189         return 0;
 190 }
 191
 192 static struct hw_interrupt_type eisa_interrupt_type = {
 193         .typename =     "EISA",
 194         .startup =      eisa_startup_irq,
 195         .shutdown =     eisa_disable_irq,
 196         .enable =       eisa_enable_irq,
 197         .disable =      eisa_disable_irq,
 198         .ack =          no_ack_irq,
 199         .end =          no_end_irq,
 200 };
 201
 202 static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
 203 {
 204         int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */
 205         unsigned long flags;
 206
 207         spin_lock_irqsave(&eisa_irq_lock, flags);
 208         /* read IRR command */
 209         eisa_out8(0x0a, 0x20);
 210         eisa_out8(0x0a, 0xa0);
 211
 212         EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n",
 213                    irq, eisa_in8(0x20), eisa_in8(0xa0));
 214
 215         /* read ISR command */
 216         eisa_out8(0x0a, 0x20);
 217         eisa_out8(0x0a, 0xa0);
 218         EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n",
 219                  eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1));
 220
 221         irq &= 0xf;
 222
 223         /* mask irq and write eoi */
 224         if (irq & 8) {
 225                 slave_mask |= (1 << (irq&7));
 226                 eisa_out8(slave_mask, 0xa1);
 227                 eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */
 228                 eisa_out8(0x62,0x20);   /* 'Specific EOI' to master-IRQ2 */
 229
 230         } else {
 231                 master_mask |= (1 << (irq&7));
 232                 eisa_out8(master_mask, 0x21);
 233                 eisa_out8(0x60|irq,0x20);       /* 'Specific EOI' to master */
 234         }
 235         spin_unlock_irqrestore(&eisa_irq_lock, flags);
 236
 237         __do_IRQ(irq);
 238
 239         spin_lock_irqsave(&eisa_irq_lock, flags);
 240         /* unmask */
 241         if (irq & 8) {
 242                 slave_mask &= ~(1 << (irq&7));
 243                 eisa_out8(slave_mask, 0xa1);
 244         } else {
 245                 master_mask &= ~(1 << (irq&7));
 246                 eisa_out8(master_mask, 0x21);
 247         }
 248         spin_unlock_irqrestore(&eisa_irq_lock, flags);
 249         return IRQ_HANDLED;
 250 }
 251
 252 static irqreturn_t dummy_irq2_handler(int _, void *dev)
 253 {
 254         printk(KERN_ALERT "eisa: uhh, irq2?\n");
 255         return IRQ_HANDLED;
 256 }
 257
 258 static struct irqaction irq2_action = {
 259         .handler = dummy_irq2_handler,
 260         .name = "cascade",
 261 };
 262
 263 static void init_eisa_pic(void)
 264 {
 265         unsigned long flags;
 266
 267         spin_lock_irqsave(&eisa_irq_lock, flags);
 268
 269         eisa_out8(0xff, 0x21); /* mask during init */
 270         eisa_out8(0xff, 0xa1); /* mask during init */
 271
 272         /* master pic */
 273         eisa_out8(0x11,0x20); /* ICW1 */
 274         eisa_out8(0x00,0x21); /* ICW2 */
 275         eisa_out8(0x04,0x21); /* ICW3 */
 276         eisa_out8(0x01,0x21); /* ICW4 */
 277         eisa_out8(0x40,0x20); /* OCW2 */
 278
 279         /* slave pic */
 280         eisa_out8(0x11,0xa0); /* ICW1 */
 281         eisa_out8(0x08,0xa1); /* ICW2 */
 282         eisa_out8(0x02,0xa1); /* ICW3 */
 283         eisa_out8(0x01,0xa1); /* ICW4 */
 284         eisa_out8(0x40,0xa0); /* OCW2 */
 285
 286         udelay(100);
 287
 288         slave_mask = 0xff;
 289         master_mask = 0xfb;
 290         eisa_out8(slave_mask, 0xa1); /* OCW1 */
 291         eisa_out8(master_mask, 0x21); /* OCW1 */
 292
 293         /* setup trig level */
 294         EISA_DBG("EISA edge/level %04x\n", eisa_irq_level);
 295
 296         eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge  */
 297         eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1);
 298
 299         EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
 300         EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
 301         EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0));
 302         EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1));
 303
 304         spin_unlock_irqrestore(&eisa_irq_lock, flags);
 305 }
 306
 307 /* Device initialisation */
 308
 309 #define is_mongoose(dev) (dev->id.sversion == 0x00076)
 310
 311 static int __devinit eisa_probe(struct parisc_device *dev)
 312 {
 313         int i, result;
 314
 315         char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
 316
 317         printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
 318                 name, dev->hpa.start);
 319
 320         eisa_dev.hba.dev = dev;
 321         eisa_dev.hba.iommu = ccio_get_iommu(dev);
 322
 323         eisa_dev.hba.lmmio_space.name = "EISA";
 324         eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000);
 325         eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff);
 326         eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM;
 327         result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space);
 328         if (result < 0) {
 329                 printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
 330                 return result;
 331         }
 332         eisa_dev.hba.io_space.name = "EISA";
 333         eisa_dev.hba.io_space.start = 0;
 334         eisa_dev.hba.io_space.end = 0xffff;
 335         eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO;
 336         result = request_resource(&ioport_resource, &eisa_dev.hba.io_space);
 337         if (result < 0) {
 338                 printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
 339                 return result;
 340         }
 341         pcibios_register_hba(&eisa_dev.hba);
 342
 343         result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev);
 344         if (result) {
 345                 printk(KERN_ERR "EISA: request_irq failed!\n");
 346                 return result;
 347         }
 348
 349         /* Reserve IRQ2 */
 350         irq_desc[2].action = &irq2_action;
 351
 352         for (i = 0; i < 16; i++) {
 353                 irq_desc[i].chip = &eisa_interrupt_type;
 354         }
 355
 356         EISA_bus = 1;
 357
 358         if (dev->num_addrs) {
 359                 /* newer firmware hand out the eeprom address */
 360                 eisa_dev.eeprom_addr = dev->addr[0];
 361         } else {
 362                 /* old firmware, need to figure out the box */
 363                 if (is_mongoose(dev)) {
 364                         eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR;
 365                 } else {
 366                         eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
 367                 }
 368         }
 369         eisa_eeprom_addr = ioremap_nocache(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
 370         result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
 371                         &eisa_dev.hba.lmmio_space);
 372         init_eisa_pic();
 373
 374         if (result >= 0) {
 375                 /* FIXME : Don't enumerate the bus twice. */
 376                 eisa_dev.root.dev = &dev->dev;
 377                 dev->dev.driver_data = &eisa_dev.root;
 378                 eisa_dev.root.bus_base_addr = 0;
 379                 eisa_dev.root.res = &eisa_dev.hba.io_space;
 380                 eisa_dev.root.slots = result;
 381                 eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
 382                 if (eisa_root_register (&eisa_dev.root)) {
 383                         printk(KERN_ERR "EISA: Failed to register EISA root\n");
 384                         return -1;
 385                 }
 386         }
 387
 388         return 0;
 389 }
 390
 391 static struct parisc_device_id eisa_tbl[] = {
 392         { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */
 393         { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */
 394         { 0, }
 395 };
 396
 397 MODULE_DEVICE_TABLE(parisc, eisa_tbl);
 398
 399 static struct parisc_driver eisa_driver = {
 400         .name =         "eisa_ba",
 401         .id_table =     eisa_tbl,
 402         .probe =        eisa_probe,
 403 };
 404
 405 void __init eisa_init(void)
 406 {
 407         register_parisc_driver(&eisa_driver);
 408 }
 409
 410
 411 static unsigned int eisa_irq_configured;
 412 void eisa_make_irq_level(int num)
 413 {
 414         if (eisa_irq_configured& (1<<num)) {
 415                 printk(KERN_WARNING
 416                        "IRQ %d polarity configured twice (last to level)\n",
 417                        num);
 418         }
 419         eisa_irq_level |= (1<<num); /* set the corresponding bit */
 420         eisa_irq_configured |= (1<<num); /* set the corresponding bit */
 421 }
 422
 423 void eisa_make_irq_edge(int num)
 424 {
 425         if (eisa_irq_configured& (1<<num)) {
 426                 printk(KERN_WARNING
 427                        "IRQ %d polarity configured twice (last to edge)\n",
 428                        num);
 429         }
 430         eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */
 431         eisa_irq_configured |= (1<<num); /* set the corresponding bit */
 432 }
 433
 434 static int __init eisa_irq_setup(char *str)
 435 {
 436         char *cur = str;
 437         int val;
 438
 439         EISA_DBG("IRQ setup\n");
 440         while (cur != NULL) {
 441                 char *pe;
 442
 443                 val = (int) simple_strtoul(cur, &pe, 0);
 444                 if (val > 15 || val < 0) {
 445                         printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
 446                         continue;
 447                 }
 448                 if (val == 2) {
 449                         val = 9;
 450                 }
 451                 eisa_make_irq_edge(val); /* clear the corresponding bit */
 452                 EISA_DBG("setting IRQ %d to edge-triggered mode\n", val);
 453
 454                 if ((cur = strchr(cur, ','))) {
 455                         cur++;
 456                 } else {
 457                         break;
 458                 }
 459         }
 460         return 1;
 461 }
 462
 463 __setup("eisa_irq_edge=", eisa_irq_setup);
 464