?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
libata: mask off DET when restoring SControl for detach
[linux-2.6/mini2440.git] / drivers / char / mxser.c
blob8beef50f95a0929190e8321c49910f5c4b581ca0
1 /*
2 * mxser.c -- MOXA Smartio/Industio family multiport serial driver.
3 *
4 * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com).
5 * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com>
6 *
7 * This code is loosely based on the 1.8 moxa driver which is based on
8 * Linux serial driver, written by Linus Torvalds, Theodore T'so and
9 * others.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
17 * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
18 * - Fixed x86_64 cleanness
19 */
20
21 #include <linux/module.h>
22 #include <linux/errno.h>
23 #include <linux/signal.h>
24 #include <linux/sched.h>
25 #include <linux/timer.h>
26 #include <linux/interrupt.h>
27 #include <linux/tty.h>
28 #include <linux/tty_flip.h>
29 #include <linux/serial.h>
30 #include <linux/serial_reg.h>
31 #include <linux/major.h>
32 #include <linux/string.h>
33 #include <linux/fcntl.h>
34 #include <linux/ptrace.h>
35 #include <linux/gfp.h>
36 #include <linux/ioport.h>
37 #include <linux/mm.h>
38 #include <linux/delay.h>
39 #include <linux/pci.h>
40 #include <linux/bitops.h>
41
42 #include <asm/system.h>
43 #include <asm/io.h>
44 #include <asm/irq.h>
45 #include <asm/uaccess.h>
46
47 #include "mxser.h"
48
49 #define MXSER_VERSION "2.0.4" /* 1.12 */
50 #define MXSERMAJOR 174
51
52 #define MXSER_BOARDS 4 /* Max. boards */
53 #define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
54 #define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
55 #define MXSER_ISR_PASS_LIMIT 100
56
57 /*CheckIsMoxaMust return value*/
58 #define MOXA_OTHER_UART 0x00
59 #define MOXA_MUST_MU150_HWID 0x01
60 #define MOXA_MUST_MU860_HWID 0x02
61
62 #define WAKEUP_CHARS 256
63
64 #define UART_MCR_AFE 0x20
65 #define UART_LSR_SPECIAL 0x1E
66
67 #define PCI_DEVICE_ID_POS104UL 0x1044
68 #define PCI_DEVICE_ID_CB108 0x1080
69 #define PCI_DEVICE_ID_CP102UF 0x1023
70 #define PCI_DEVICE_ID_CB114 0x1142
71 #define PCI_DEVICE_ID_CP114UL 0x1143
72 #define PCI_DEVICE_ID_CB134I 0x1341
73 #define PCI_DEVICE_ID_CP138U 0x1380
74
75
76 #define C168_ASIC_ID 1
77 #define C104_ASIC_ID 2
78 #define C102_ASIC_ID 0xB
79 #define CI132_ASIC_ID 4
80 #define CI134_ASIC_ID 3
81 #define CI104J_ASIC_ID 5
82
83 #define MXSER_HIGHBAUD 1
84 #define MXSER_HAS2 2
85
86 /* This is only for PCI */
87 static const struct {
88 int type;
89 int tx_fifo;
90 int rx_fifo;
91 int xmit_fifo_size;
92 int rx_high_water;
93 int rx_trigger;
94 int rx_low_water;
95 long max_baud;
96 } Gpci_uart_info[] = {
97 {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
98 {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
99 {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
100 };
101 #define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info)
102
103 struct mxser_cardinfo {
104 char *name;
105 unsigned int nports;
106 unsigned int flags;
107 };
108
109 static const struct mxser_cardinfo mxser_cards[] = {
110 /* 0*/ { "C168 series", 8, },
111 { "C104 series", 4, },
112 { "CI-104J series", 4, },
113 { "C168H/PCI series", 8, },
114 { "C104H/PCI series", 4, },
115 /* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */
116 { "CI-132 series", 4, MXSER_HAS2 },
117 { "CI-134 series", 4, },
118 { "CP-132 series", 2, },
119 { "CP-114 series", 4, },
120 /*10*/ { "CT-114 series", 4, },
121 { "CP-102 series", 2, MXSER_HIGHBAUD },
122 { "CP-104U series", 4, },
123 { "CP-168U series", 8, },
124 { "CP-132U series", 2, },
125 /*15*/ { "CP-134U series", 4, },
126 { "CP-104JU series", 4, },
127 { "Moxa UC7000 Serial", 8, }, /* RC7000 */
128 { "CP-118U series", 8, },
129 { "CP-102UL series", 2, },
130 /*20*/ { "CP-102U series", 2, },
131 { "CP-118EL series", 8, },
132 { "CP-168EL series", 8, },
133 { "CP-104EL series", 4, },
134 { "CB-108 series", 8, },
135 /*25*/ { "CB-114 series", 4, },
136 { "CB-134I series", 4, },
137 { "CP-138U series", 8, },
138 { "POS-104UL series", 4, },
139 { "CP-114UL series", 4, },
140 /*30*/ { "CP-102UF series", 2, }
141 };
142
143 /* driver_data correspond to the lines in the structure above
144 see also ISA probe function before you change something */
145 static struct pci_device_id mxser_pcibrds[] = {
146 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 },
147 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 },
148 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 },
149 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 },
150 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 },
151 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 },
152 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 },
153 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 },
154 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 },
155 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 },
156 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 },
157 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 },
158 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 },
159 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 },
160 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 },
161 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 },
162 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 },
163 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 },
164 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 },
165 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 },
166 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 },
167 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 },
168 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 },
169 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 },
170 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 },
171 { }
172 };
173 MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
174
175 static unsigned long ioaddr[MXSER_BOARDS];
176 static int ttymajor = MXSERMAJOR;
177
178 /* Variables for insmod */
179
180 MODULE_AUTHOR("Casper Yang");
181 MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
182 module_param_array(ioaddr, ulong, NULL, 0);
183 MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
184 module_param(ttymajor, int, 0);
185 MODULE_LICENSE("GPL");
186
187 struct mxser_log {
188 int tick;
189 unsigned long rxcnt[MXSER_PORTS];
190 unsigned long txcnt[MXSER_PORTS];
191 };
192
193 struct mxser_mon {
194 unsigned long rxcnt;
195 unsigned long txcnt;
196 unsigned long up_rxcnt;
197 unsigned long up_txcnt;
198 int modem_status;
199 unsigned char hold_reason;
200 };
201
202 struct mxser_mon_ext {
203 unsigned long rx_cnt[32];
204 unsigned long tx_cnt[32];
205 unsigned long up_rxcnt[32];
206 unsigned long up_txcnt[32];
207 int modem_status[32];
208
209 long baudrate[32];
210 int databits[32];
211 int stopbits[32];
212 int parity[32];
213 int flowctrl[32];
214 int fifo[32];
215 int iftype[32];
216 };
217
218 struct mxser_board;
219
220 struct mxser_port {
221 struct tty_port port;
222 struct mxser_board *board;
223
224 unsigned long ioaddr;
225 unsigned long opmode_ioaddr;
226 int max_baud;
227
228 int rx_high_water;
229 int rx_trigger; /* Rx fifo trigger level */
230 int rx_low_water;
231 int baud_base; /* max. speed */
232 int type; /* UART type */
233
234 int x_char; /* xon/xoff character */
235 int IER; /* Interrupt Enable Register */
236 int MCR; /* Modem control register */
237
238 unsigned char stop_rx;
239 unsigned char ldisc_stop_rx;
240
241 int custom_divisor;
242 unsigned char err_shadow;
243
244 struct async_icount icount; /* kernel counters for 4 input interrupts */
245 int timeout;
246
247 int read_status_mask;
248 int ignore_status_mask;
249 int xmit_fifo_size;
250 int xmit_head;
251 int xmit_tail;
252 int xmit_cnt;
253
254 struct ktermios normal_termios;
255
256 struct mxser_mon mon_data;
257
258 spinlock_t slock;
259 wait_queue_head_t delta_msr_wait;
260 };
261
262 struct mxser_board {
263 unsigned int idx;
264 int irq;
265 const struct mxser_cardinfo *info;
266 unsigned long vector;
267 unsigned long vector_mask;
268
269 int chip_flag;
270 int uart_type;
271
272 struct mxser_port ports[MXSER_PORTS_PER_BOARD];
273 };
274
275 struct mxser_mstatus {
276 tcflag_t cflag;
277 int cts;
278 int dsr;
279 int ri;
280 int dcd;
281 };
282
283 static struct mxser_board mxser_boards[MXSER_BOARDS];
284 static struct tty_driver *mxvar_sdriver;
285 static struct mxser_log mxvar_log;
286 static int mxser_set_baud_method[MXSER_PORTS + 1];
287
288 static void mxser_enable_must_enchance_mode(unsigned long baseio)
289 {
290 u8 oldlcr;
291 u8 efr;
292
293 oldlcr = inb(baseio + UART_LCR);
294 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
295
296 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
297 efr |= MOXA_MUST_EFR_EFRB_ENABLE;
298
299 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
300 outb(oldlcr, baseio + UART_LCR);
301 }
302
303 static void mxser_disable_must_enchance_mode(unsigned long baseio)
304 {
305 u8 oldlcr;
306 u8 efr;
307
308 oldlcr = inb(baseio + UART_LCR);
309 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
310
311 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
312 efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;
313
314 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
315 outb(oldlcr, baseio + UART_LCR);
316 }
317
318 static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
319 {
320 u8 oldlcr;
321 u8 efr;
322
323 oldlcr = inb(baseio + UART_LCR);
324 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
325
326 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
327 efr &= ~MOXA_MUST_EFR_BANK_MASK;
328 efr |= MOXA_MUST_EFR_BANK0;
329
330 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
331 outb(value, baseio + MOXA_MUST_XON1_REGISTER);
332 outb(oldlcr, baseio + UART_LCR);
333 }
334
335 static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value)
336 {
337 u8 oldlcr;
338 u8 efr;
339
340 oldlcr = inb(baseio + UART_LCR);
341 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
342
343 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
344 efr &= ~MOXA_MUST_EFR_BANK_MASK;
345 efr |= MOXA_MUST_EFR_BANK0;
346
347 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
348 outb(value, baseio + MOXA_MUST_XOFF1_REGISTER);
349 outb(oldlcr, baseio + UART_LCR);
350 }
351
352 static void mxser_set_must_fifo_value(struct mxser_port *info)
353 {
354 u8 oldlcr;
355 u8 efr;
356
357 oldlcr = inb(info->ioaddr + UART_LCR);
358 outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR);
359
360 efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER);
361 efr &= ~MOXA_MUST_EFR_BANK_MASK;
362 efr |= MOXA_MUST_EFR_BANK1;
363
364 outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER);
365 outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER);
366 outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER);
367 outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER);
368 outb(oldlcr, info->ioaddr + UART_LCR);
369 }
370
371 static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
372 {
373 u8 oldlcr;
374 u8 efr;
375
376 oldlcr = inb(baseio + UART_LCR);
377 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
378
379 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
380 efr &= ~MOXA_MUST_EFR_BANK_MASK;
381 efr |= MOXA_MUST_EFR_BANK2;
382
383 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
384 outb(value, baseio + MOXA_MUST_ENUM_REGISTER);
385 outb(oldlcr, baseio + UART_LCR);
386 }
387
388 static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
389 {
390 u8 oldlcr;
391 u8 efr;
392
393 oldlcr = inb(baseio + UART_LCR);
394 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
395
396 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
397 efr &= ~MOXA_MUST_EFR_BANK_MASK;
398 efr |= MOXA_MUST_EFR_BANK2;
399
400 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
401 *pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
402 outb(oldlcr, baseio + UART_LCR);
403 }
404
405 static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
406 {
407 u8 oldlcr;
408 u8 efr;
409
410 oldlcr = inb(baseio + UART_LCR);
411 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
412
413 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
414 efr &= ~MOXA_MUST_EFR_SF_MASK;
415
416 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
417 outb(oldlcr, baseio + UART_LCR);
418 }
419
420 static void mxser_enable_must_tx_software_flow_control(unsigned long baseio)
421 {
422 u8 oldlcr;
423 u8 efr;
424
425 oldlcr = inb(baseio + UART_LCR);
426 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
427
428 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
429 efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
430 efr |= MOXA_MUST_EFR_SF_TX1;
431
432 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
433 outb(oldlcr, baseio + UART_LCR);
434 }
435
436 static void mxser_disable_must_tx_software_flow_control(unsigned long baseio)
437 {
438 u8 oldlcr;
439 u8 efr;
440
441 oldlcr = inb(baseio + UART_LCR);
442 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
443
444 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
445 efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
446
447 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
448 outb(oldlcr, baseio + UART_LCR);
449 }
450
451 static void mxser_enable_must_rx_software_flow_control(unsigned long baseio)
452 {
453 u8 oldlcr;
454 u8 efr;
455
456 oldlcr = inb(baseio + UART_LCR);
457 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
458
459 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
460 efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
461 efr |= MOXA_MUST_EFR_SF_RX1;
462
463 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
464 outb(oldlcr, baseio + UART_LCR);
465 }
466
467 static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
468 {
469 u8 oldlcr;
470 u8 efr;
471
472 oldlcr = inb(baseio + UART_LCR);
473 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
474
475 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
476 efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
477
478 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
479 outb(oldlcr, baseio + UART_LCR);
480 }
481
482 #ifdef CONFIG_PCI
483 static int __devinit CheckIsMoxaMust(unsigned long io)
484 {
485 u8 oldmcr, hwid;
486 int i;
487
488 outb(0, io + UART_LCR);
489 mxser_disable_must_enchance_mode(io);
490 oldmcr = inb(io + UART_MCR);
491 outb(0, io + UART_MCR);
492 mxser_set_must_xon1_value(io, 0x11);
493 if ((hwid = inb(io + UART_MCR)) != 0) {
494 outb(oldmcr, io + UART_MCR);
495 return MOXA_OTHER_UART;
496 }
497
498 mxser_get_must_hardware_id(io, &hwid);
499 for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
500 if (hwid == Gpci_uart_info[i].type)
501 return (int)hwid;
502 }
503 return MOXA_OTHER_UART;
504 }
505 #endif
506
507 static void process_txrx_fifo(struct mxser_port *info)
508 {
509 int i;
510
511 if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
512 info->rx_trigger = 1;
513 info->rx_high_water = 1;
514 info->rx_low_water = 1;
515 info->xmit_fifo_size = 1;
516 } else
517 for (i = 0; i < UART_INFO_NUM; i++)
518 if (info->board->chip_flag == Gpci_uart_info[i].type) {
519 info->rx_trigger = Gpci_uart_info[i].rx_trigger;
520 info->rx_low_water = Gpci_uart_info[i].rx_low_water;
521 info->rx_high_water = Gpci_uart_info[i].rx_high_water;
522 info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
523 break;
524 }
525 }
526
527 static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
528 {
529 static unsigned char mxser_msr[MXSER_PORTS + 1];
530 unsigned char status = 0;
531
532 status = inb(baseaddr + UART_MSR);
533
534 mxser_msr[port] &= 0x0F;
535 mxser_msr[port] |= status;
536 status = mxser_msr[port];
537 if (mode)
538 mxser_msr[port] = 0;
539
540 return status;
541 }
542
543 static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
544 struct mxser_port *port)
545 {
546 DECLARE_WAITQUEUE(wait, current);
547 int retval;
548 int do_clocal = 0;
549 unsigned long flags;
550
551 /*
552 * If non-blocking mode is set, or the port is not enabled,
553 * then make the check up front and then exit.
554 */
555 if ((filp->f_flags & O_NONBLOCK) ||
556 test_bit(TTY_IO_ERROR, &tty->flags)) {
557 port->port.flags |= ASYNC_NORMAL_ACTIVE;
558 return 0;
559 }
560
561 if (tty->termios->c_cflag & CLOCAL)
562 do_clocal = 1;
563
564 /*
565 * Block waiting for the carrier detect and the line to become
566 * free (i.e., not in use by the callout). While we are in
567 * this loop, port->port.count is dropped by one, so that
568 * mxser_close() knows when to free things. We restore it upon
569 * exit, either normal or abnormal.
570 */
571 retval = 0;
572 add_wait_queue(&port->port.open_wait, &wait);
573
574 spin_lock_irqsave(&port->slock, flags);
575 if (!tty_hung_up_p(filp))
576 port->port.count--;
577 spin_unlock_irqrestore(&port->slock, flags);
578 port->port.blocked_open++;
579 while (1) {
580 spin_lock_irqsave(&port->slock, flags);
581 outb(inb(port->ioaddr + UART_MCR) |
582 UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR);
583 spin_unlock_irqrestore(&port->slock, flags);
584 set_current_state(TASK_INTERRUPTIBLE);
585 if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
586 if (port->port.flags & ASYNC_HUP_NOTIFY)
587 retval = -EAGAIN;
588 else
589 retval = -ERESTARTSYS;
590 break;
591 }
592 if (!(port->port.flags & ASYNC_CLOSING) &&
593 (do_clocal ||
594 (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD)))
595 break;
596 if (signal_pending(current)) {
597 retval = -ERESTARTSYS;
598 break;
599 }
600 schedule();
601 }
602 set_current_state(TASK_RUNNING);
603 remove_wait_queue(&port->port.open_wait, &wait);
604 if (!tty_hung_up_p(filp))
605 port->port.count++;
606 port->port.blocked_open--;
607 if (retval)
608 return retval;
609 port->port.flags |= ASYNC_NORMAL_ACTIVE;
610 return 0;
611 }
612
613 static int mxser_set_baud(struct tty_struct *tty, long newspd)
614 {
615 struct mxser_port *info = tty->driver_data;
616 int quot = 0, baud;
617 unsigned char cval;
618
619 if (!info->ioaddr)
620 return -1;
621
622 if (newspd > info->max_baud)
623 return -1;
624
625 if (newspd == 134) {
626 quot = 2 * info->baud_base / 269;
627 tty_encode_baud_rate(tty, 134, 134);
628 } else if (newspd) {
629 quot = info->baud_base / newspd;
630 if (quot == 0)
631 quot = 1;
632 baud = info->baud_base/quot;
633 tty_encode_baud_rate(tty, baud, baud);
634 } else {
635 quot = 0;
636 }
637
638 info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
639 info->timeout += HZ / 50; /* Add .02 seconds of slop */
640
641 if (quot) {
642 info->MCR |= UART_MCR_DTR;
643 outb(info->MCR, info->ioaddr + UART_MCR);
644 } else {
645 info->MCR &= ~UART_MCR_DTR;
646 outb(info->MCR, info->ioaddr + UART_MCR);
647 return 0;
648 }
649
650 cval = inb(info->ioaddr + UART_LCR);
651
652 outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */
653
654 outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */
655 outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */
656 outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
657
658 #ifdef BOTHER
659 if (C_BAUD(tty) == BOTHER) {
660 quot = info->baud_base % newspd;
661 quot *= 8;
662 if (quot % newspd > newspd / 2) {
663 quot /= newspd;
664 quot++;
665 } else
666 quot /= newspd;
667
668 mxser_set_must_enum_value(info->ioaddr, quot);
669 } else
670 #endif
671 mxser_set_must_enum_value(info->ioaddr, 0);
672
673 return 0;
674 }
675
676 /*
677 * This routine is called to set the UART divisor registers to match
678 * the specified baud rate for a serial port.
679 */
680 static int mxser_change_speed(struct tty_struct *tty,
681 struct ktermios *old_termios)
682 {
683 struct mxser_port *info = tty->driver_data;
684 unsigned cflag, cval, fcr;
685 int ret = 0;
686 unsigned char status;
687
688 cflag = tty->termios->c_cflag;
689 if (!info->ioaddr)
690 return ret;
691
692 if (mxser_set_baud_method[tty->index] == 0)
693 mxser_set_baud(tty, tty_get_baud_rate(tty));
694
695 /* byte size and parity */
696 switch (cflag & CSIZE) {
697 case CS5:
698 cval = 0x00;
699 break;
700 case CS6:
701 cval = 0x01;
702 break;
703 case CS7:
704 cval = 0x02;
705 break;
706 case CS8:
707 cval = 0x03;
708 break;
709 default:
710 cval = 0x00;
711 break; /* too keep GCC shut... */
712 }
713 if (cflag & CSTOPB)
714 cval |= 0x04;
715 if (cflag & PARENB)
716 cval |= UART_LCR_PARITY;
717 if (!(cflag & PARODD))
718 cval |= UART_LCR_EPAR;
719 if (cflag & CMSPAR)
720 cval |= UART_LCR_SPAR;
721
722 if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
723 if (info->board->chip_flag) {
724 fcr = UART_FCR_ENABLE_FIFO;
725 fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
726 mxser_set_must_fifo_value(info);
727 } else
728 fcr = 0;
729 } else {
730 fcr = UART_FCR_ENABLE_FIFO;
731 if (info->board->chip_flag) {
732 fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
733 mxser_set_must_fifo_value(info);
734 } else {
735 switch (info->rx_trigger) {
736 case 1:
737 fcr |= UART_FCR_TRIGGER_1;
738 break;
739 case 4:
740 fcr |= UART_FCR_TRIGGER_4;
741 break;
742 case 8:
743 fcr |= UART_FCR_TRIGGER_8;
744 break;
745 default:
746 fcr |= UART_FCR_TRIGGER_14;
747 break;
748 }
749 }
750 }
751
752 /* CTS flow control flag and modem status interrupts */
753 info->IER &= ~UART_IER_MSI;
754 info->MCR &= ~UART_MCR_AFE;
755 if (cflag & CRTSCTS) {
756 info->port.flags |= ASYNC_CTS_FLOW;
757 info->IER |= UART_IER_MSI;
758 if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
759 info->MCR |= UART_MCR_AFE;
760 } else {
761 status = inb(info->ioaddr + UART_MSR);
762 if (tty->hw_stopped) {
763 if (status & UART_MSR_CTS) {
764 tty->hw_stopped = 0;
765 if (info->type != PORT_16550A &&
766 !info->board->chip_flag) {
767 outb(info->IER & ~UART_IER_THRI,
768 info->ioaddr +
769 UART_IER);
770 info->IER |= UART_IER_THRI;
771 outb(info->IER, info->ioaddr +
772 UART_IER);
773 }
774 tty_wakeup(tty);
775 }
776 } else {
777 if (!(status & UART_MSR_CTS)) {
778 tty->hw_stopped = 1;
779 if ((info->type != PORT_16550A) &&
780 (!info->board->chip_flag)) {
781 info->IER &= ~UART_IER_THRI;
782 outb(info->IER, info->ioaddr +
783 UART_IER);
784 }
785 }
786 }
787 }
788 } else {
789 info->port.flags &= ~ASYNC_CTS_FLOW;
790 }
791 outb(info->MCR, info->ioaddr + UART_MCR);
792 if (cflag & CLOCAL) {
793 info->port.flags &= ~ASYNC_CHECK_CD;
794 } else {
795 info->port.flags |= ASYNC_CHECK_CD;
796 info->IER |= UART_IER_MSI;
797 }
798 outb(info->IER, info->ioaddr + UART_IER);
799
800 /*
801 * Set up parity check flag
802 */
803 info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
804 if (I_INPCK(tty))
805 info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
806 if (I_BRKINT(tty) || I_PARMRK(tty))
807 info->read_status_mask |= UART_LSR_BI;
808
809 info->ignore_status_mask = 0;
810
811 if (I_IGNBRK(tty)) {
812 info->ignore_status_mask |= UART_LSR_BI;
813 info->read_status_mask |= UART_LSR_BI;
814 /*
815 * If we're ignore parity and break indicators, ignore
816 * overruns too. (For real raw support).
817 */
818 if (I_IGNPAR(tty)) {
819 info->ignore_status_mask |=
820 UART_LSR_OE |
821 UART_LSR_PE |
822 UART_LSR_FE;
823 info->read_status_mask |=
824 UART_LSR_OE |
825 UART_LSR_PE |
826 UART_LSR_FE;
827 }
828 }
829 if (info->board->chip_flag) {
830 mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty));
831 mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty));
832 if (I_IXON(tty)) {
833 mxser_enable_must_rx_software_flow_control(
834 info->ioaddr);
835 } else {
836 mxser_disable_must_rx_software_flow_control(
837 info->ioaddr);
838 }
839 if (I_IXOFF(tty)) {
840 mxser_enable_must_tx_software_flow_control(
841 info->ioaddr);
842 } else {
843 mxser_disable_must_tx_software_flow_control(
844 info->ioaddr);
845 }
846 }
847
848
849 outb(fcr, info->ioaddr + UART_FCR); /* set fcr */
850 outb(cval, info->ioaddr + UART_LCR);
851
852 return ret;
853 }
854
855 static void mxser_check_modem_status(struct tty_struct *tty,
856 struct mxser_port *port, int status)
857 {
858 /* update input line counters */
859 if (status & UART_MSR_TERI)
860 port->icount.rng++;
861 if (status & UART_MSR_DDSR)
862 port->icount.dsr++;
863 if (status & UART_MSR_DDCD)
864 port->icount.dcd++;
865 if (status & UART_MSR_DCTS)
866 port->icount.cts++;
867 port->mon_data.modem_status = status;
868 wake_up_interruptible(&port->delta_msr_wait);
869
870 if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
871 if (status & UART_MSR_DCD)
872 wake_up_interruptible(&port->port.open_wait);
873 }
874
875 tty = tty_port_tty_get(&port->port);
876 if (port->port.flags & ASYNC_CTS_FLOW) {
877 if (tty->hw_stopped) {
878 if (status & UART_MSR_CTS) {
879 tty->hw_stopped = 0;
880
881 if ((port->type != PORT_16550A) &&
882 (!port->board->chip_flag)) {
883 outb(port->IER & ~UART_IER_THRI,
884 port->ioaddr + UART_IER);
885 port->IER |= UART_IER_THRI;
886 outb(port->IER, port->ioaddr +
887 UART_IER);
888 }
889 tty_wakeup(tty);
890 }
891 } else {
892 if (!(status & UART_MSR_CTS)) {
893 tty->hw_stopped = 1;
894 if (port->type != PORT_16550A &&
895 !port->board->chip_flag) {
896 port->IER &= ~UART_IER_THRI;
897 outb(port->IER, port->ioaddr +
898 UART_IER);
899 }
900 }
901 }
902 }
903 }
904
905 static int mxser_startup(struct tty_struct *tty)
906 {
907 struct mxser_port *info = tty->driver_data;
908 unsigned long page;
909 unsigned long flags;
910
911 page = __get_free_page(GFP_KERNEL);
912 if (!page)
913 return -ENOMEM;
914
915 spin_lock_irqsave(&info->slock, flags);
916
917 if (info->port.flags & ASYNC_INITIALIZED) {
918 free_page(page);
919 spin_unlock_irqrestore(&info->slock, flags);
920 return 0;
921 }
922
923 if (!info->ioaddr || !info->type) {
924 set_bit(TTY_IO_ERROR, &tty->flags);
925 free_page(page);
926 spin_unlock_irqrestore(&info->slock, flags);
927 return 0;
928 }
929 if (info->port.xmit_buf)
930 free_page(page);
931 else
932 info->port.xmit_buf = (unsigned char *) page;
933
934 /*
935 * Clear the FIFO buffers and disable them
936 * (they will be reenabled in mxser_change_speed())
937 */
938 if (info->board->chip_flag)
939 outb((UART_FCR_CLEAR_RCVR |
940 UART_FCR_CLEAR_XMIT |
941 MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
942 else
943 outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
944 info->ioaddr + UART_FCR);
945
946 /*
947 * At this point there's no way the LSR could still be 0xFF;
948 * if it is, then bail out, because there's likely no UART
949 * here.
950 */
951 if (inb(info->ioaddr + UART_LSR) == 0xff) {
952 spin_unlock_irqrestore(&info->slock, flags);
953 if (capable(CAP_SYS_ADMIN)) {
954 if (tty)
955 set_bit(TTY_IO_ERROR, &tty->flags);
956 return 0;
957 } else
958 return -ENODEV;
959 }
960
961 /*
962 * Clear the interrupt registers.
963 */
964 (void) inb(info->ioaddr + UART_LSR);
965 (void) inb(info->ioaddr + UART_RX);
966 (void) inb(info->ioaddr + UART_IIR);
967 (void) inb(info->ioaddr + UART_MSR);
968
969 /*
970 * Now, initialize the UART
971 */
972 outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */
973 info->MCR = UART_MCR_DTR | UART_MCR_RTS;
974 outb(info->MCR, info->ioaddr + UART_MCR);
975
976 /*
977 * Finally, enable interrupts
978 */
979 info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
980
981 if (info->board->chip_flag)
982 info->IER |= MOXA_MUST_IER_EGDAI;
983 outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */
984
985 /*
986 * And clear the interrupt registers again for luck.
987 */
988 (void) inb(info->ioaddr + UART_LSR);
989 (void) inb(info->ioaddr + UART_RX);
990 (void) inb(info->ioaddr + UART_IIR);
991 (void) inb(info->ioaddr + UART_MSR);
992
993 clear_bit(TTY_IO_ERROR, &tty->flags);
994 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
995
996 /*
997 * and set the speed of the serial port
998 */
999 mxser_change_speed(tty, NULL);
1000 info->port.flags |= ASYNC_INITIALIZED;
1001 spin_unlock_irqrestore(&info->slock, flags);
1002
1003 return 0;
1004 }
1005
1006 /*
1007 * This routine will shutdown a serial port; interrupts maybe disabled, and
1008 * DTR is dropped if the hangup on close termio flag is on.
1009 */
1010 static void mxser_shutdown(struct tty_struct *tty)
1011 {
1012 struct mxser_port *info = tty->driver_data;
1013 unsigned long flags;
1014
1015 if (!(info->port.flags & ASYNC_INITIALIZED))
1016 return;
1017
1018 spin_lock_irqsave(&info->slock, flags);
1019
1020 /*
1021 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
1022 * here so the queue might never be waken up
1023 */
1024 wake_up_interruptible(&info->delta_msr_wait);
1025
1026 /*
1027 * Free the IRQ, if necessary
1028 */
1029 if (info->port.xmit_buf) {
1030 free_page((unsigned long) info->port.xmit_buf);
1031 info->port.xmit_buf = NULL;
1032 }
1033
1034 info->IER = 0;
1035 outb(0x00, info->ioaddr + UART_IER);
1036
1037 if (tty->termios->c_cflag & HUPCL)
1038 info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
1039 outb(info->MCR, info->ioaddr + UART_MCR);
1040
1041 /* clear Rx/Tx FIFO's */
1042 if (info->board->chip_flag)
1043 outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
1044 MOXA_MUST_FCR_GDA_MODE_ENABLE,
1045 info->ioaddr + UART_FCR);
1046 else
1047 outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
1048 info->ioaddr + UART_FCR);
1049
1050 /* read data port to reset things */
1051 (void) inb(info->ioaddr + UART_RX);
1052
1053 set_bit(TTY_IO_ERROR, &tty->flags);
1054
1055 info->port.flags &= ~ASYNC_INITIALIZED;
1056
1057 if (info->board->chip_flag)
1058 SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
1059
1060 spin_unlock_irqrestore(&info->slock, flags);
1061 }
1062
1063 /*
1064 * This routine is called whenever a serial port is opened. It
1065 * enables interrupts for a serial port, linking in its async structure into
1066 * the IRQ chain. It also performs the serial-specific
1067 * initialization for the tty structure.
1068 */
1069 static int mxser_open(struct tty_struct *tty, struct file *filp)
1070 {
1071 struct mxser_port *info;
1072 unsigned long flags;
1073 int retval, line;
1074
1075 line = tty->index;
1076 if (line == MXSER_PORTS)
1077 return 0;
1078 if (line < 0 || line > MXSER_PORTS)
1079 return -ENODEV;
1080 info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD];
1081 if (!info->ioaddr)
1082 return -ENODEV;
1083
1084 tty->driver_data = info;
1085 tty_port_tty_set(&info->port, tty);
1086 /*
1087 * Start up serial port
1088 */
1089 spin_lock_irqsave(&info->slock, flags);
1090 info->port.count++;
1091 spin_unlock_irqrestore(&info->slock, flags);
1092 retval = mxser_startup(tty);
1093 if (retval)
1094 return retval;
1095
1096 retval = mxser_block_til_ready(tty, filp, info);
1097 if (retval)
1098 return retval;
1099
1100 /* unmark here for very high baud rate (ex. 921600 bps) used */
1101 tty->low_latency = 1;
1102 return 0;
1103 }
1104
1105 static void mxser_flush_buffer(struct tty_struct *tty)
1106 {
1107 struct mxser_port *info = tty->driver_data;
1108 char fcr;
1109 unsigned long flags;
1110
1111
1112 spin_lock_irqsave(&info->slock, flags);
1113 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1114
1115 fcr = inb(info->ioaddr + UART_FCR);
1116 outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
1117 info->ioaddr + UART_FCR);
1118 outb(fcr, info->ioaddr + UART_FCR);
1119
1120 spin_unlock_irqrestore(&info->slock, flags);
1121
1122 tty_wakeup(tty);
1123 }
1124
1125
1126 /*
1127 * This routine is called when the serial port gets closed. First, we
1128 * wait for the last remaining data to be sent. Then, we unlink its
1129 * async structure from the interrupt chain if necessary, and we free
1130 * that IRQ if nothing is left in the chain.
1131 */
1132 static void mxser_close(struct tty_struct *tty, struct file *filp)
1133 {
1134 struct mxser_port *info = tty->driver_data;
1135
1136 unsigned long timeout;
1137 unsigned long flags;
1138
1139 if (tty->index == MXSER_PORTS)
1140 return;
1141 if (!info)
1142 return;
1143
1144 spin_lock_irqsave(&info->slock, flags);
1145
1146 if (tty_hung_up_p(filp)) {
1147 spin_unlock_irqrestore(&info->slock, flags);
1148 return;
1149 }
1150 if ((tty->count == 1) && (info->port.count != 1)) {
1151 /*
1152 * Uh, oh. tty->count is 1, which means that the tty
1153 * structure will be freed. Info->port.count should always
1154 * be one in these conditions. If it's greater than
1155 * one, we've got real problems, since it means the
1156 * serial port won't be shutdown.
1157 */
1158 printk(KERN_ERR "mxser_close: bad serial port count; "
1159 "tty->count is 1, info->port.count is %d\n", info->port.count);
1160 info->port.count = 1;
1161 }
1162 if (--info->port.count < 0) {
1163 printk(KERN_ERR "mxser_close: bad serial port count for "
1164 "ttys%d: %d\n", tty->index, info->port.count);
1165 info->port.count = 0;
1166 }
1167 if (info->port.count) {
1168 spin_unlock_irqrestore(&info->slock, flags);
1169 return;
1170 }
1171 info->port.flags |= ASYNC_CLOSING;
1172 spin_unlock_irqrestore(&info->slock, flags);
1173 /*
1174 * Save the termios structure, since this port may have
1175 * separate termios for callout and dialin.
1176 */
1177 if (info->port.flags & ASYNC_NORMAL_ACTIVE)
1178 info->normal_termios = *tty->termios;
1179 /*
1180 * Now we wait for the transmit buffer to clear; and we notify
1181 * the line discipline to only process XON/XOFF characters.
1182 */
1183 tty->closing = 1;
1184 if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
1185 tty_wait_until_sent(tty, info->port.closing_wait);
1186 /*
1187 * At this point we stop accepting input. To do this, we
1188 * disable the receive line status interrupts, and tell the
1189 * interrupt driver to stop checking the data ready bit in the
1190 * line status register.
1191 */
1192 info->IER &= ~UART_IER_RLSI;
1193 if (info->board->chip_flag)
1194 info->IER &= ~MOXA_MUST_RECV_ISR;
1195
1196 if (info->port.flags & ASYNC_INITIALIZED) {
1197 outb(info->IER, info->ioaddr + UART_IER);
1198 /*
1199 * Before we drop DTR, make sure the UART transmitter
1200 * has completely drained; this is especially
1201 * important if there is a transmit FIFO!
1202 */
1203 timeout = jiffies + HZ;
1204 while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
1205 schedule_timeout_interruptible(5);
1206 if (time_after(jiffies, timeout))
1207 break;
1208 }
1209 }
1210 mxser_shutdown(tty);
1211
1212 mxser_flush_buffer(tty);
1213 tty_ldisc_flush(tty);
1214
1215 tty->closing = 0;
1216 tty_port_tty_set(&info->port, NULL);
1217 if (info->port.blocked_open) {
1218 if (info->port.close_delay)
1219 schedule_timeout_interruptible(info->port.close_delay);
1220 wake_up_interruptible(&info->port.open_wait);
1221 }
1222
1223 info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
1224 }
1225
1226 static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
1227 {
1228 int c, total = 0;
1229 struct mxser_port *info = tty->driver_data;
1230 unsigned long flags;
1231
1232 if (!info->port.xmit_buf)
1233 return 0;
1234
1235 while (1) {
1236 c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
1237 SERIAL_XMIT_SIZE - info->xmit_head));
1238 if (c <= 0)
1239 break;
1240
1241 memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
1242 spin_lock_irqsave(&info->slock, flags);
1243 info->xmit_head = (info->xmit_head + c) &
1244 (SERIAL_XMIT_SIZE - 1);
1245 info->xmit_cnt += c;
1246 spin_unlock_irqrestore(&info->slock, flags);
1247
1248 buf += c;
1249 count -= c;
1250 total += c;
1251 }
1252
1253 if (info->xmit_cnt && !tty->stopped) {
1254 if (!tty->hw_stopped ||
1255 (info->type == PORT_16550A) ||
1256 (info->board->chip_flag)) {
1257 spin_lock_irqsave(&info->slock, flags);
1258 outb(info->IER & ~UART_IER_THRI, info->ioaddr +
1259 UART_IER);
1260 info->IER |= UART_IER_THRI;
1261 outb(info->IER, info->ioaddr + UART_IER);
1262 spin_unlock_irqrestore(&info->slock, flags);
1263 }
1264 }
1265 return total;
1266 }
1267
1268 static int mxser_put_char(struct tty_struct *tty, unsigned char ch)
1269 {
1270 struct mxser_port *info = tty->driver_data;
1271 unsigned long flags;
1272
1273 if (!info->port.xmit_buf)
1274 return 0;
1275
1276 if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
1277 return 0;
1278
1279 spin_lock_irqsave(&info->slock, flags);
1280 info->port.xmit_buf[info->xmit_head++] = ch;
1281 info->xmit_head &= SERIAL_XMIT_SIZE - 1;
1282 info->xmit_cnt++;
1283 spin_unlock_irqrestore(&info->slock, flags);
1284 if (!tty->stopped) {
1285 if (!tty->hw_stopped ||
1286 (info->type == PORT_16550A) ||
1287 info->board->chip_flag) {
1288 spin_lock_irqsave(&info->slock, flags);
1289 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
1290 info->IER |= UART_IER_THRI;
1291 outb(info->IER, info->ioaddr + UART_IER);
1292 spin_unlock_irqrestore(&info->slock, flags);
1293 }
1294 }
1295 return 1;
1296 }
1297
1298
1299 static void mxser_flush_chars(struct tty_struct *tty)
1300 {
1301 struct mxser_port *info = tty->driver_data;
1302 unsigned long flags;
1303
1304 if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf ||
1305 (tty->hw_stopped && info->type != PORT_16550A &&
1306 !info->board->chip_flag))
1307 return;
1308
1309 spin_lock_irqsave(&info->slock, flags);
1310
1311 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
1312 info->IER |= UART_IER_THRI;
1313 outb(info->IER, info->ioaddr + UART_IER);
1314
1315 spin_unlock_irqrestore(&info->slock, flags);
1316 }
1317
1318 static int mxser_write_room(struct tty_struct *tty)
1319 {
1320 struct mxser_port *info = tty->driver_data;
1321 int ret;
1322
1323 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
1324 return ret < 0 ? 0 : ret;
1325 }
1326
1327 static int mxser_chars_in_buffer(struct tty_struct *tty)
1328 {
1329 struct mxser_port *info = tty->driver_data;
1330 return info->xmit_cnt;
1331 }
1332
1333 /*
1334 * ------------------------------------------------------------
1335 * friends of mxser_ioctl()
1336 * ------------------------------------------------------------
1337 */
1338 static int mxser_get_serial_info(struct tty_struct *tty,
1339 struct serial_struct __user *retinfo)
1340 {
1341 struct mxser_port *info = tty->driver_data;
1342 struct serial_struct tmp = {
1343 .type = info->type,
1344 .line = tty->index,
1345 .port = info->ioaddr,
1346 .irq = info->board->irq,
1347 .flags = info->port.flags,
1348 .baud_base = info->baud_base,
1349 .close_delay = info->port.close_delay,
1350 .closing_wait = info->port.closing_wait,
1351 .custom_divisor = info->custom_divisor,
1352 .hub6 = 0
1353 };
1354 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1355 return -EFAULT;
1356 return 0;
1357 }
1358
1359 static int mxser_set_serial_info(struct tty_struct *tty,
1360 struct serial_struct __user *new_info)
1361 {
1362 struct mxser_port *info = tty->driver_data;
1363 struct serial_struct new_serial;
1364 speed_t baud;
1365 unsigned long sl_flags;
1366 unsigned int flags;
1367 int retval = 0;
1368
1369 if (!new_info || !info->ioaddr)
1370 return -ENODEV;
1371 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
1372 return -EFAULT;
1373
1374 if (new_serial.irq != info->board->irq ||
1375 new_serial.port != info->ioaddr)
1376 return -EINVAL;
1377
1378 flags = info->port.flags & ASYNC_SPD_MASK;
1379
1380 if (!capable(CAP_SYS_ADMIN)) {
1381 if ((new_serial.baud_base != info->baud_base) ||
1382 (new_serial.close_delay != info->port.close_delay) ||
1383 ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
1384 return -EPERM;
1385 info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
1386 (new_serial.flags & ASYNC_USR_MASK));
1387 } else {
1388 /*
1389 * OK, past this point, all the error checking has been done.
1390 * At this point, we start making changes.....
1391 */
1392 info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
1393 (new_serial.flags & ASYNC_FLAGS));
1394 info->port.close_delay = new_serial.close_delay * HZ / 100;
1395 info->port.closing_wait = new_serial.closing_wait * HZ / 100;
1396 tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY)
1397 ? 1 : 0;
1398 if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
1399 (new_serial.baud_base != info->baud_base ||
1400 new_serial.custom_divisor !=
1401 info->custom_divisor)) {
1402 baud = new_serial.baud_base / new_serial.custom_divisor;
1403 tty_encode_baud_rate(tty, baud, baud);
1404 }
1405 }
1406
1407 info->type = new_serial.type;
1408
1409 process_txrx_fifo(info);
1410
1411 if (info->port.flags & ASYNC_INITIALIZED) {
1412 if (flags != (info->port.flags & ASYNC_SPD_MASK)) {
1413 spin_lock_irqsave(&info->slock, sl_flags);
1414 mxser_change_speed(tty, NULL);
1415 spin_unlock_irqrestore(&info->slock, sl_flags);
1416 }
1417 } else
1418 retval = mxser_startup(tty);
1419
1420 return retval;
1421 }
1422
1423 /*
1424 * mxser_get_lsr_info - get line status register info
1425 *
1426 * Purpose: Let user call ioctl() to get info when the UART physically
1427 * is emptied. On bus types like RS485, the transmitter must
1428 * release the bus after transmitting. This must be done when
1429 * the transmit shift register is empty, not be done when the
1430 * transmit holding register is empty. This functionality
1431 * allows an RS485 driver to be written in user space.
1432 */
1433 static int mxser_get_lsr_info(struct mxser_port *info,
1434 unsigned int __user *value)
1435 {
1436 unsigned char status;
1437 unsigned int result;
1438 unsigned long flags;
1439
1440 spin_lock_irqsave(&info->slock, flags);
1441 status = inb(info->ioaddr + UART_LSR);
1442 spin_unlock_irqrestore(&info->slock, flags);
1443 result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
1444 return put_user(result, value);
1445 }
1446
1447 static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
1448 {
1449 struct mxser_port *info = tty->driver_data;
1450 unsigned char control, status;
1451 unsigned long flags;
1452
1453
1454 if (tty->index == MXSER_PORTS)
1455 return -ENOIOCTLCMD;
1456 if (test_bit(TTY_IO_ERROR, &tty->flags))
1457 return -EIO;
1458
1459 control = info->MCR;
1460
1461 spin_lock_irqsave(&info->slock, flags);
1462 status = inb(info->ioaddr + UART_MSR);
1463 if (status & UART_MSR_ANY_DELTA)
1464 mxser_check_modem_status(tty, info, status);
1465 spin_unlock_irqrestore(&info->slock, flags);
1466 return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
1467 ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
1468 ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
1469 ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
1470 ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
1471 ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
1472 }
1473
1474 static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
1475 unsigned int set, unsigned int clear)
1476 {
1477 struct mxser_port *info = tty->driver_data;
1478 unsigned long flags;
1479
1480
1481 if (tty->index == MXSER_PORTS)
1482 return -ENOIOCTLCMD;
1483 if (test_bit(TTY_IO_ERROR, &tty->flags))
1484 return -EIO;
1485
1486 spin_lock_irqsave(&info->slock, flags);
1487
1488 if (set & TIOCM_RTS)
1489 info->MCR |= UART_MCR_RTS;
1490 if (set & TIOCM_DTR)
1491 info->MCR |= UART_MCR_DTR;
1492
1493 if (clear & TIOCM_RTS)
1494 info->MCR &= ~UART_MCR_RTS;
1495 if (clear & TIOCM_DTR)
1496 info->MCR &= ~UART_MCR_DTR;
1497
1498 outb(info->MCR, info->ioaddr + UART_MCR);
1499 spin_unlock_irqrestore(&info->slock, flags);
1500 return 0;
1501 }
1502
1503 static int __init mxser_program_mode(int port)
1504 {
1505 int id, i, j, n;
1506
1507 outb(0, port);
1508 outb(0, port);
1509 outb(0, port);
1510 (void)inb(port);
1511 (void)inb(port);
1512 outb(0, port);
1513 (void)inb(port);
1514
1515 id = inb(port + 1) & 0x1F;
1516 if ((id != C168_ASIC_ID) &&
1517 (id != C104_ASIC_ID) &&
1518 (id != C102_ASIC_ID) &&
1519 (id != CI132_ASIC_ID) &&
1520 (id != CI134_ASIC_ID) &&
1521 (id != CI104J_ASIC_ID))
1522 return -1;
1523 for (i = 0, j = 0; i < 4; i++) {
1524 n = inb(port + 2);
1525 if (n == 'M') {
1526 j = 1;
1527 } else if ((j == 1) && (n == 1)) {
1528 j = 2;
1529 break;
1530 } else
1531 j = 0;
1532 }
1533 if (j != 2)
1534 id = -2;
1535 return id;
1536 }
1537
1538 static void __init mxser_normal_mode(int port)
1539 {
1540 int i, n;
1541
1542 outb(0xA5, port + 1);
1543 outb(0x80, port + 3);
1544 outb(12, port + 0); /* 9600 bps */
1545 outb(0, port + 1);
1546 outb(0x03, port + 3); /* 8 data bits */
1547 outb(0x13, port + 4); /* loop back mode */
1548 for (i = 0; i < 16; i++) {
1549 n = inb(port + 5);
1550 if ((n & 0x61) == 0x60)
1551 break;
1552 if ((n & 1) == 1)
1553 (void)inb(port);
1554 }
1555 outb(0x00, port + 4);
1556 }
1557
1558 #define CHIP_SK 0x01 /* Serial Data Clock in Eprom */
1559 #define CHIP_DO 0x02 /* Serial Data Output in Eprom */
1560 #define CHIP_CS 0x04 /* Serial Chip Select in Eprom */
1561 #define CHIP_DI 0x08 /* Serial Data Input in Eprom */
1562 #define EN_CCMD 0x000 /* Chip's command register */
1563 #define EN0_RSARLO 0x008 /* Remote start address reg 0 */
1564 #define EN0_RSARHI 0x009 /* Remote start address reg 1 */
1565 #define EN0_RCNTLO 0x00A /* Remote byte count reg WR */
1566 #define EN0_RCNTHI 0x00B /* Remote byte count reg WR */
1567 #define EN0_DCFG 0x00E /* Data configuration reg WR */
1568 #define EN0_PORT 0x010 /* Rcv missed frame error counter RD */
1569 #define ENC_PAGE0 0x000 /* Select page 0 of chip registers */
1570 #define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */
1571 static int __init mxser_read_register(int port, unsigned short *regs)
1572 {
1573 int i, k, value, id;
1574 unsigned int j;
1575
1576 id = mxser_program_mode(port);
1577 if (id < 0)
1578 return id;
1579 for (i = 0; i < 14; i++) {
1580 k = (i & 0x3F) | 0x180;
1581 for (j = 0x100; j > 0; j >>= 1) {
1582 outb(CHIP_CS, port);
1583 if (k & j) {
1584 outb(CHIP_CS | CHIP_DO, port);
1585 outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */
1586 } else {
1587 outb(CHIP_CS, port);
1588 outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */
1589 }
1590 }
1591 (void)inb(port);
1592 value = 0;
1593 for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
1594 outb(CHIP_CS, port);
1595 outb(CHIP_CS | CHIP_SK, port);
1596 if (inb(port) & CHIP_DI)
1597 value |= j;
1598 }
1599 regs[i] = value;
1600 outb(0, port);
1601 }
1602 mxser_normal_mode(port);
1603 return id;
1604 }
1605
1606 static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
1607 {
1608 struct mxser_port *port;
1609 struct tty_struct *tty;
1610 int result, status;
1611 unsigned int i, j;
1612 int ret = 0;
1613
1614 switch (cmd) {
1615 case MOXA_GET_MAJOR:
1616 if (printk_ratelimit())
1617 printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
1618 "%x (GET_MAJOR), fix your userspace\n",
1619 current->comm, cmd);
1620 return put_user(ttymajor, (int __user *)argp);
1621
1622 case MOXA_CHKPORTENABLE:
1623 result = 0;
1624 lock_kernel();
1625 for (i = 0; i < MXSER_BOARDS; i++)
1626 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
1627 if (mxser_boards[i].ports[j].ioaddr)
1628 result |= (1 << i);
1629 unlock_kernel();
1630 return put_user(result, (unsigned long __user *)argp);
1631 case MOXA_GETDATACOUNT:
1632 lock_kernel();
1633 if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
1634 ret = -EFAULT;
1635 unlock_kernel();
1636 return ret;
1637 case MOXA_GETMSTATUS: {
1638 struct mxser_mstatus ms, __user *msu = argp;
1639 lock_kernel();
1640 for (i = 0; i < MXSER_BOARDS; i++)
1641 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
1642 port = &mxser_boards[i].ports[j];
1643 memset(&ms, 0, sizeof(ms));
1644
1645 if (!port->ioaddr)
1646 goto copy;
1647
1648 tty = tty_port_tty_get(&port->port);
1649
1650 if (!tty || !tty->termios)
1651 ms.cflag = port->normal_termios.c_cflag;
1652 else
1653 ms.cflag = tty->termios->c_cflag;
1654 tty_kref_put(tty);
1655 status = inb(port->ioaddr + UART_MSR);
1656 if (status & UART_MSR_DCD)
1657 ms.dcd = 1;
1658 if (status & UART_MSR_DSR)
1659 ms.dsr = 1;
1660 if (status & UART_MSR_CTS)
1661 ms.cts = 1;
1662 copy:
1663 if (copy_to_user(msu, &ms, sizeof(ms))) {
1664 unlock_kernel();
1665 return -EFAULT;
1666 }
1667 msu++;
1668 }
1669 unlock_kernel();
1670 return 0;
1671 }
1672 case MOXA_ASPP_MON_EXT: {
1673 struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */
1674 unsigned int cflag, iflag, p;
1675 u8 opmode;
1676
1677 me = kzalloc(sizeof(*me), GFP_KERNEL);
1678 if (!me)
1679 return -ENOMEM;
1680
1681 lock_kernel();
1682 for (i = 0, p = 0; i < MXSER_BOARDS; i++) {
1683 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) {
1684 if (p >= ARRAY_SIZE(me->rx_cnt)) {
1685 i = MXSER_BOARDS;
1686 break;
1687 }
1688 port = &mxser_boards[i].ports[j];
1689 if (!port->ioaddr)
1690 continue;
1691
1692 status = mxser_get_msr(port->ioaddr, 0, p);
1693
1694 if (status & UART_MSR_TERI)
1695 port->icount.rng++;
1696 if (status & UART_MSR_DDSR)
1697 port->icount.dsr++;
1698 if (status & UART_MSR_DDCD)
1699 port->icount.dcd++;
1700 if (status & UART_MSR_DCTS)
1701 port->icount.cts++;
1702
1703 port->mon_data.modem_status = status;
1704 me->rx_cnt[p] = port->mon_data.rxcnt;
1705 me->tx_cnt[p] = port->mon_data.txcnt;
1706 me->up_rxcnt[p] = port->mon_data.up_rxcnt;
1707 me->up_txcnt[p] = port->mon_data.up_txcnt;
1708 me->modem_status[p] =
1709 port->mon_data.modem_status;
1710 tty = tty_port_tty_get(&port->port);
1711
1712 if (!tty || !tty->termios) {
1713 cflag = port->normal_termios.c_cflag;
1714 iflag = port->normal_termios.c_iflag;
1715 me->baudrate[p] = tty_termios_baud_rate(&port->normal_termios);
1716 } else {
1717 cflag = tty->termios->c_cflag;
1718 iflag = tty->termios->c_iflag;
1719 me->baudrate[p] = tty_get_baud_rate(tty);
1720 }
1721 tty_kref_put(tty);
1722
1723 me->databits[p] = cflag & CSIZE;
1724 me->stopbits[p] = cflag & CSTOPB;
1725 me->parity[p] = cflag & (PARENB | PARODD |
1726 CMSPAR);
1727
1728 if (cflag & CRTSCTS)
1729 me->flowctrl[p] |= 0x03;
1730
1731 if (iflag & (IXON | IXOFF))
1732 me->flowctrl[p] |= 0x0C;
1733
1734 if (port->type == PORT_16550A)
1735 me->fifo[p] = 1;
1736
1737 opmode = inb(port->opmode_ioaddr) >>
1738 ((p % 4) * 2);
1739 opmode &= OP_MODE_MASK;
1740 me->iftype[p] = opmode;
1741 }
1742 }
1743 unlock_kernel();
1744 if (copy_to_user(argp, me, sizeof(*me)))
1745 ret = -EFAULT;
1746 kfree(me);
1747 return ret;
1748 }
1749 default:
1750 return -ENOIOCTLCMD;
1751 }
1752 return 0;
1753 }
1754
1755 static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg,
1756 struct async_icount *cprev)
1757 {
1758 struct async_icount cnow;
1759 unsigned long flags;
1760 int ret;
1761
1762 spin_lock_irqsave(&info->slock, flags);
1763 cnow = info->icount; /* atomic copy */
1764 spin_unlock_irqrestore(&info->slock, flags);
1765
1766 ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
1767 ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
1768 ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
1769 ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
1770
1771 *cprev = cnow;
1772
1773 return ret;
1774 }
1775
1776 static int mxser_ioctl(struct tty_struct *tty, struct file *file,
1777 unsigned int cmd, unsigned long arg)
1778 {
1779 struct mxser_port *info = tty->driver_data;
1780 struct async_icount cnow;
1781 unsigned long flags;
1782 void __user *argp = (void __user *)arg;
1783 int retval;
1784
1785 if (tty->index == MXSER_PORTS)
1786 return mxser_ioctl_special(cmd, argp);
1787
1788 if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
1789 int p;
1790 unsigned long opmode;
1791 static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
1792 int shiftbit;
1793 unsigned char val, mask;
1794
1795 p = tty->index % 4;
1796 if (cmd == MOXA_SET_OP_MODE) {
1797 if (get_user(opmode, (int __user *) argp))
1798 return -EFAULT;
1799 if (opmode != RS232_MODE &&
1800 opmode != RS485_2WIRE_MODE &&
1801 opmode != RS422_MODE &&
1802 opmode != RS485_4WIRE_MODE)
1803 return -EFAULT;
1804 lock_kernel();
1805 mask = ModeMask[p];
1806 shiftbit = p * 2;
1807 val = inb(info->opmode_ioaddr);
1808 val &= mask;
1809 val |= (opmode << shiftbit);
1810 outb(val, info->opmode_ioaddr);
1811 unlock_kernel();
1812 } else {
1813 lock_kernel();
1814 shiftbit = p * 2;
1815 opmode = inb(info->opmode_ioaddr) >> shiftbit;
1816 opmode &= OP_MODE_MASK;
1817 unlock_kernel();
1818 if (put_user(opmode, (int __user *)argp))
1819 return -EFAULT;
1820 }
1821 return 0;
1822 }
1823
1824 if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
1825 test_bit(TTY_IO_ERROR, &tty->flags))
1826 return -EIO;
1827
1828 switch (cmd) {
1829 case TIOCGSERIAL:
1830 lock_kernel();
1831 retval = mxser_get_serial_info(tty, argp);
1832 unlock_kernel();
1833 return retval;
1834 case TIOCSSERIAL:
1835 lock_kernel();
1836 retval = mxser_set_serial_info(tty, argp);
1837 unlock_kernel();
1838 return retval;
1839 case TIOCSERGETLSR: /* Get line status register */
1840 return mxser_get_lsr_info(info, argp);
1841 /*
1842 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1843 * - mask passed in arg for lines of interest
1844 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1845 * Caller should use TIOCGICOUNT to see which one it was
1846 */
1847 case TIOCMIWAIT:
1848 spin_lock_irqsave(&info->slock, flags);
1849 cnow = info->icount; /* note the counters on entry */
1850 spin_unlock_irqrestore(&info->slock, flags);
1851
1852 return wait_event_interruptible(info->delta_msr_wait,
1853 mxser_cflags_changed(info, arg, &cnow));
1854 /*
1855 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1856 * Return: write counters to the user passed counter struct
1857 * NB: both 1->0 and 0->1 transitions are counted except for
1858 * RI where only 0->1 is counted.
1859 */
1860 case TIOCGICOUNT: {
1861 struct serial_icounter_struct icnt = { 0 };
1862 spin_lock_irqsave(&info->slock, flags);
1863 cnow = info->icount;
1864 spin_unlock_irqrestore(&info->slock, flags);
1865
1866 icnt.frame = cnow.frame;
1867 icnt.brk = cnow.brk;
1868 icnt.overrun = cnow.overrun;
1869 icnt.buf_overrun = cnow.buf_overrun;
1870 icnt.parity = cnow.parity;
1871 icnt.rx = cnow.rx;
1872 icnt.tx = cnow.tx;
1873 icnt.cts = cnow.cts;
1874 icnt.dsr = cnow.dsr;
1875 icnt.rng = cnow.rng;
1876 icnt.dcd = cnow.dcd;
1877
1878 return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
1879 }
1880 case MOXA_HighSpeedOn:
1881 return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
1882 case MOXA_SDS_RSTICOUNTER:
1883 lock_kernel();
1884 info->mon_data.rxcnt = 0;
1885 info->mon_data.txcnt = 0;
1886 unlock_kernel();
1887 return 0;
1888
1889 case MOXA_ASPP_OQUEUE:{
1890 int len, lsr;
1891
1892 lock_kernel();
1893 len = mxser_chars_in_buffer(tty);
1894 lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT;
1895 len += (lsr ? 0 : 1);
1896 unlock_kernel();
1897
1898 return put_user(len, (int __user *)argp);
1899 }
1900 case MOXA_ASPP_MON: {
1901 int mcr, status;
1902
1903 lock_kernel();
1904 status = mxser_get_msr(info->ioaddr, 1, tty->index);
1905 mxser_check_modem_status(tty, info, status);
1906
1907 mcr = inb(info->ioaddr + UART_MCR);
1908 if (mcr & MOXA_MUST_MCR_XON_FLAG)
1909 info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
1910 else
1911 info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
1912
1913 if (mcr & MOXA_MUST_MCR_TX_XON)
1914 info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
1915 else
1916 info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
1917
1918 if (tty->hw_stopped)
1919 info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
1920 else
1921 info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
1922 unlock_kernel();
1923 if (copy_to_user(argp, &info->mon_data,
1924 sizeof(struct mxser_mon)))
1925 return -EFAULT;
1926
1927 return 0;
1928 }
1929 case MOXA_ASPP_LSTATUS: {
1930 if (put_user(info->err_shadow, (unsigned char __user *)argp))
1931 return -EFAULT;
1932
1933 info->err_shadow = 0;
1934 return 0;
1935 }
1936 case MOXA_SET_BAUD_METHOD: {
1937 int method;
1938
1939 if (get_user(method, (int __user *)argp))
1940 return -EFAULT;
1941 mxser_set_baud_method[tty->index] = method;
1942 return put_user(method, (int __user *)argp);
1943 }
1944 default:
1945 return -ENOIOCTLCMD;
1946 }
1947 return 0;
1948 }
1949
1950 static void mxser_stoprx(struct tty_struct *tty)
1951 {
1952 struct mxser_port *info = tty->driver_data;
1953
1954 info->ldisc_stop_rx = 1;
1955 if (I_IXOFF(tty)) {
1956 if (info->board->chip_flag) {
1957 info->IER &= ~MOXA_MUST_RECV_ISR;
1958 outb(info->IER, info->ioaddr + UART_IER);
1959 } else {
1960 info->x_char = STOP_CHAR(tty);
1961 outb(0, info->ioaddr + UART_IER);
1962 info->IER |= UART_IER_THRI;
1963 outb(info->IER, info->ioaddr + UART_IER);
1964 }
1965 }
1966
1967 if (tty->termios->c_cflag & CRTSCTS) {
1968 info->MCR &= ~UART_MCR_RTS;
1969 outb(info->MCR, info->ioaddr + UART_MCR);
1970 }
1971 }
1972
1973 /*
1974 * This routine is called by the upper-layer tty layer to signal that
1975 * incoming characters should be throttled.
1976 */
1977 static void mxser_throttle(struct tty_struct *tty)
1978 {
1979 mxser_stoprx(tty);
1980 }
1981
1982 static void mxser_unthrottle(struct tty_struct *tty)
1983 {
1984 struct mxser_port *info = tty->driver_data;
1985
1986 /* startrx */
1987 info->ldisc_stop_rx = 0;
1988 if (I_IXOFF(tty)) {
1989 if (info->x_char)
1990 info->x_char = 0;
1991 else {
1992 if (info->board->chip_flag) {
1993 info->IER |= MOXA_MUST_RECV_ISR;
1994 outb(info->IER, info->ioaddr + UART_IER);
1995 } else {
1996 info->x_char = START_CHAR(tty);
1997 outb(0, info->ioaddr + UART_IER);
1998 info->IER |= UART_IER_THRI;
1999 outb(info->IER, info->ioaddr + UART_IER);
2000 }
2001 }
2002 }
2003
2004 if (tty->termios->c_cflag & CRTSCTS) {
2005 info->MCR |= UART_MCR_RTS;
2006 outb(info->MCR, info->ioaddr + UART_MCR);
2007 }
2008 }
2009
2010 /*
2011 * mxser_stop() and mxser_start()
2012 *
2013 * This routines are called before setting or resetting tty->stopped.
2014 * They enable or disable transmitter interrupts, as necessary.
2015 */
2016 static void mxser_stop(struct tty_struct *tty)
2017 {
2018 struct mxser_port *info = tty->driver_data;
2019 unsigned long flags;
2020
2021 spin_lock_irqsave(&info->slock, flags);
2022 if (info->IER & UART_IER_THRI) {
2023 info->IER &= ~UART_IER_THRI;
2024 outb(info->IER, info->ioaddr + UART_IER);
2025 }
2026 spin_unlock_irqrestore(&info->slock, flags);
2027 }
2028
2029 static void mxser_start(struct tty_struct *tty)
2030 {
2031 struct mxser_port *info = tty->driver_data;
2032 unsigned long flags;
2033
2034 spin_lock_irqsave(&info->slock, flags);
2035 if (info->xmit_cnt && info->port.xmit_buf) {
2036 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
2037 info->IER |= UART_IER_THRI;
2038 outb(info->IER, info->ioaddr + UART_IER);
2039 }
2040 spin_unlock_irqrestore(&info->slock, flags);
2041 }
2042
2043 static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
2044 {
2045 struct mxser_port *info = tty->driver_data;
2046 unsigned long flags;
2047
2048 spin_lock_irqsave(&info->slock, flags);
2049 mxser_change_speed(tty, old_termios);
2050 spin_unlock_irqrestore(&info->slock, flags);
2051
2052 if ((old_termios->c_cflag & CRTSCTS) &&
2053 !(tty->termios->c_cflag & CRTSCTS)) {
2054 tty->hw_stopped = 0;
2055 mxser_start(tty);
2056 }
2057
2058 /* Handle sw stopped */
2059 if ((old_termios->c_iflag & IXON) &&
2060 !(tty->termios->c_iflag & IXON)) {
2061 tty->stopped = 0;
2062
2063 if (info->board->chip_flag) {
2064 spin_lock_irqsave(&info->slock, flags);
2065 mxser_disable_must_rx_software_flow_control(
2066 info->ioaddr);
2067 spin_unlock_irqrestore(&info->slock, flags);
2068 }
2069
2070 mxser_start(tty);
2071 }
2072 }
2073
2074 /*
2075 * mxser_wait_until_sent() --- wait until the transmitter is empty
2076 */
2077 static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
2078 {
2079 struct mxser_port *info = tty->driver_data;
2080 unsigned long orig_jiffies, char_time;
2081 int lsr;
2082
2083 if (info->type == PORT_UNKNOWN)
2084 return;
2085
2086 if (info->xmit_fifo_size == 0)
2087 return; /* Just in case.... */
2088
2089 orig_jiffies = jiffies;
2090 /*
2091 * Set the check interval to be 1/5 of the estimated time to
2092 * send a single character, and make it at least 1. The check
2093 * interval should also be less than the timeout.
2094 *
2095 * Note: we have to use pretty tight timings here to satisfy
2096 * the NIST-PCTS.
2097 */
2098 char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
2099 char_time = char_time / 5;
2100 if (char_time == 0)
2101 char_time = 1;
2102 if (timeout && timeout < char_time)
2103 char_time = timeout;
2104 /*
2105 * If the transmitter hasn't cleared in twice the approximate
2106 * amount of time to send the entire FIFO, it probably won't
2107 * ever clear. This assumes the UART isn't doing flow
2108 * control, which is currently the case. Hence, if it ever
2109 * takes longer than info->timeout, this is probably due to a
2110 * UART bug of some kind. So, we clamp the timeout parameter at
2111 * 2*info->timeout.
2112 */
2113 if (!timeout || timeout > 2 * info->timeout)
2114 timeout = 2 * info->timeout;
2115 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
2116 printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...",
2117 timeout, char_time);
2118 printk("jiff=%lu...", jiffies);
2119 #endif
2120 lock_kernel();
2121 while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
2122 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
2123 printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
2124 #endif
2125 schedule_timeout_interruptible(char_time);
2126 if (signal_pending(current))
2127 break;
2128 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2129 break;
2130 }
2131 set_current_state(TASK_RUNNING);
2132 unlock_kernel();
2133
2134 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
2135 printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
2136 #endif
2137 }
2138
2139 /*
2140 * This routine is called by tty_hangup() when a hangup is signaled.
2141 */
2142 static void mxser_hangup(struct tty_struct *tty)
2143 {
2144 struct mxser_port *info = tty->driver_data;
2145
2146 mxser_flush_buffer(tty);
2147 mxser_shutdown(tty);
2148 info->port.count = 0;
2149 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
2150 tty_port_tty_set(&info->port, NULL);
2151 wake_up_interruptible(&info->port.open_wait);
2152 }
2153
2154 /*
2155 * mxser_rs_break() --- routine which turns the break handling on or off
2156 */
2157 static int mxser_rs_break(struct tty_struct *tty, int break_state)
2158 {
2159 struct mxser_port *info = tty->driver_data;
2160 unsigned long flags;
2161
2162 spin_lock_irqsave(&info->slock, flags);
2163 if (break_state == -1)
2164 outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
2165 info->ioaddr + UART_LCR);
2166 else
2167 outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
2168 info->ioaddr + UART_LCR);
2169 spin_unlock_irqrestore(&info->slock, flags);
2170 return 0;
2171 }
2172
2173 static void mxser_receive_chars(struct tty_struct *tty,
2174 struct mxser_port *port, int *status)
2175 {
2176 unsigned char ch, gdl;
2177 int ignored = 0;
2178 int cnt = 0;
2179 int recv_room;
2180 int max = 256;
2181
2182 recv_room = tty->receive_room;
2183 if (recv_room == 0 && !port->ldisc_stop_rx)
2184 mxser_stoprx(tty);
2185 if (port->board->chip_flag != MOXA_OTHER_UART) {
2186
2187 if (*status & UART_LSR_SPECIAL)
2188 goto intr_old;
2189 if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
2190 (*status & MOXA_MUST_LSR_RERR))
2191 goto intr_old;
2192 if (*status & MOXA_MUST_LSR_RERR)
2193 goto intr_old;
2194
2195 gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
2196
2197 if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
2198 gdl &= MOXA_MUST_GDL_MASK;
2199 if (gdl >= recv_room) {
2200 if (!port->ldisc_stop_rx)
2201 mxser_stoprx(tty);
2202 }
2203 while (gdl--) {
2204 ch = inb(port->ioaddr + UART_RX);
2205 tty_insert_flip_char(tty, ch, 0);
2206 cnt++;
2207 }
2208 goto end_intr;
2209 }
2210 intr_old:
2211
2212 do {
2213 if (max-- < 0)
2214 break;
2215
2216 ch = inb(port->ioaddr + UART_RX);
2217 if (port->board->chip_flag && (*status & UART_LSR_OE))
2218 outb(0x23, port->ioaddr + UART_FCR);
2219 *status &= port->read_status_mask;
2220 if (*status & port->ignore_status_mask) {
2221 if (++ignored > 100)
2222 break;
2223 } else {
2224 char flag = 0;
2225 if (*status & UART_LSR_SPECIAL) {
2226 if (*status & UART_LSR_BI) {
2227 flag = TTY_BREAK;
2228 port->icount.brk++;
2229
2230 if (port->port.flags & ASYNC_SAK)
2231 do_SAK(tty);
2232 } else if (*status & UART_LSR_PE) {
2233 flag = TTY_PARITY;
2234 port->icount.parity++;
2235 } else if (*status & UART_LSR_FE) {
2236 flag = TTY_FRAME;
2237 port->icount.frame++;
2238 } else if (*status & UART_LSR_OE) {
2239 flag = TTY_OVERRUN;
2240 port->icount.overrun++;
2241 } else
2242 flag = TTY_BREAK;
2243 }
2244 tty_insert_flip_char(tty, ch, flag);
2245 cnt++;
2246 if (cnt >= recv_room) {
2247 if (!port->ldisc_stop_rx)
2248 mxser_stoprx(tty);
2249 break;
2250 }
2251
2252 }
2253
2254 if (port->board->chip_flag)
2255 break;
2256
2257 *status = inb(port->ioaddr + UART_LSR);
2258 } while (*status & UART_LSR_DR);
2259
2260 end_intr:
2261 mxvar_log.rxcnt[tty->index] += cnt;
2262 port->mon_data.rxcnt += cnt;
2263 port->mon_data.up_rxcnt += cnt;
2264
2265 /*
2266 * We are called from an interrupt context with &port->slock
2267 * being held. Drop it temporarily in order to prevent
2268 * recursive locking.
2269 */
2270 spin_unlock(&port->slock);
2271 tty_flip_buffer_push(tty);
2272 spin_lock(&port->slock);
2273 }
2274
2275 static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port)
2276 {
2277 int count, cnt;
2278
2279 if (port->x_char) {
2280 outb(port->x_char, port->ioaddr + UART_TX);
2281 port->x_char = 0;
2282 mxvar_log.txcnt[tty->index]++;
2283 port->mon_data.txcnt++;
2284 port->mon_data.up_txcnt++;
2285 port->icount.tx++;
2286 return;
2287 }
2288
2289 if (port->port.xmit_buf == NULL)
2290 return;
2291
2292 if (port->xmit_cnt <= 0 || tty->stopped ||
2293 (tty->hw_stopped &&
2294 (port->type != PORT_16550A) &&
2295 (!port->board->chip_flag))) {
2296 port->IER &= ~UART_IER_THRI;
2297 outb(port->IER, port->ioaddr + UART_IER);
2298 return;
2299 }
2300
2301 cnt = port->xmit_cnt;
2302 count = port->xmit_fifo_size;
2303 do {
2304 outb(port->port.xmit_buf[port->xmit_tail++],
2305 port->ioaddr + UART_TX);
2306 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
2307 if (--port->xmit_cnt <= 0)
2308 break;
2309 } while (--count > 0);
2310 mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt);
2311
2312 port->mon_data.txcnt += (cnt - port->xmit_cnt);
2313 port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
2314 port->icount.tx += (cnt - port->xmit_cnt);
2315
2316 if (port->xmit_cnt < WAKEUP_CHARS && tty)
2317 tty_wakeup(tty);
2318
2319 if (port->xmit_cnt <= 0) {
2320 port->IER &= ~UART_IER_THRI;
2321 outb(port->IER, port->ioaddr + UART_IER);
2322 }
2323 }
2324
2325 /*
2326 * This is the serial driver's generic interrupt routine
2327 */
2328 static irqreturn_t mxser_interrupt(int irq, void *dev_id)
2329 {
2330 int status, iir, i;
2331 struct mxser_board *brd = NULL;
2332 struct mxser_port *port;
2333 int max, irqbits, bits, msr;
2334 unsigned int int_cnt, pass_counter = 0;
2335 int handled = IRQ_NONE;
2336 struct tty_struct *tty;
2337
2338 for (i = 0; i < MXSER_BOARDS; i++)
2339 if (dev_id == &mxser_boards[i]) {
2340 brd = dev_id;
2341 break;
2342 }
2343
2344 if (i == MXSER_BOARDS)
2345 goto irq_stop;
2346 if (brd == NULL)
2347 goto irq_stop;
2348 max = brd->info->nports;
2349 while (pass_counter++ < MXSER_ISR_PASS_LIMIT) {
2350 irqbits = inb(brd->vector) & brd->vector_mask;
2351 if (irqbits == brd->vector_mask)
2352 break;
2353
2354 handled = IRQ_HANDLED;
2355 for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
2356 if (irqbits == brd->vector_mask)
2357 break;
2358 if (bits & irqbits)
2359 continue;
2360 port = &brd->ports[i];
2361
2362 int_cnt = 0;
2363 spin_lock(&port->slock);
2364 do {
2365 iir = inb(port->ioaddr + UART_IIR);
2366 if (iir & UART_IIR_NO_INT)
2367 break;
2368 iir &= MOXA_MUST_IIR_MASK;
2369 tty = tty_port_tty_get(&port->port);
2370 if (!tty ||
2371 (port->port.flags & ASYNC_CLOSING) ||
2372 !(port->port.flags &
2373 ASYNC_INITIALIZED)) {
2374 status = inb(port->ioaddr + UART_LSR);
2375 outb(0x27, port->ioaddr + UART_FCR);
2376 inb(port->ioaddr + UART_MSR);
2377 tty_kref_put(tty);
2378 break;
2379 }
2380
2381 status = inb(port->ioaddr + UART_LSR);
2382
2383 if (status & UART_LSR_PE)
2384 port->err_shadow |= NPPI_NOTIFY_PARITY;
2385 if (status & UART_LSR_FE)
2386 port->err_shadow |= NPPI_NOTIFY_FRAMING;
2387 if (status & UART_LSR_OE)
2388 port->err_shadow |=
2389 NPPI_NOTIFY_HW_OVERRUN;
2390 if (status & UART_LSR_BI)
2391 port->err_shadow |= NPPI_NOTIFY_BREAK;
2392
2393 if (port->board->chip_flag) {
2394 if (iir == MOXA_MUST_IIR_GDA ||
2395 iir == MOXA_MUST_IIR_RDA ||
2396 iir == MOXA_MUST_IIR_RTO ||
2397 iir == MOXA_MUST_IIR_LSR)
2398 mxser_receive_chars(tty, port,
2399 &status);
2400
2401 } else {
2402 status &= port->read_status_mask;
2403 if (status & UART_LSR_DR)
2404 mxser_receive_chars(tty, port,
2405 &status);
2406 }
2407 msr = inb(port->ioaddr + UART_MSR);
2408 if (msr & UART_MSR_ANY_DELTA)
2409 mxser_check_modem_status(tty, port, msr);
2410
2411 if (port->board->chip_flag) {
2412 if (iir == 0x02 && (status &
2413 UART_LSR_THRE))
2414 mxser_transmit_chars(tty, port);
2415 } else {
2416 if (status & UART_LSR_THRE)
2417 mxser_transmit_chars(tty, port);
2418 }
2419 tty_kref_put(tty);
2420 } while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
2421 spin_unlock(&port->slock);
2422 }
2423 }
2424
2425 irq_stop:
2426 return handled;
2427 }
2428
2429 static const struct tty_operations mxser_ops = {
2430 .open = mxser_open,
2431 .close = mxser_close,
2432 .write = mxser_write,
2433 .put_char = mxser_put_char,
2434 .flush_chars = mxser_flush_chars,
2435 .write_room = mxser_write_room,
2436 .chars_in_buffer = mxser_chars_in_buffer,
2437 .flush_buffer = mxser_flush_buffer,
2438 .ioctl = mxser_ioctl,
2439 .throttle = mxser_throttle,
2440 .unthrottle = mxser_unthrottle,
2441 .set_termios = mxser_set_termios,
2442 .stop = mxser_stop,
2443 .start = mxser_start,
2444 .hangup = mxser_hangup,
2445 .break_ctl = mxser_rs_break,
2446 .wait_until_sent = mxser_wait_until_sent,
2447 .tiocmget = mxser_tiocmget,
2448 .tiocmset = mxser_tiocmset,
2449 };
2450
2451 /*
2452 * The MOXA Smartio/Industio serial driver boot-time initialization code!
2453 */
2454
2455 static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
2456 unsigned int irq)
2457 {
2458 if (irq)
2459 free_irq(brd->irq, brd);
2460 if (pdev != NULL) { /* PCI */
2461 #ifdef CONFIG_PCI
2462 pci_release_region(pdev, 2);
2463 pci_release_region(pdev, 3);
2464 #endif
2465 } else {
2466 release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
2467 release_region(brd->vector, 1);
2468 }
2469 }
2470
2471 static int __devinit mxser_initbrd(struct mxser_board *brd,
2472 struct pci_dev *pdev)
2473 {
2474 struct mxser_port *info;
2475 unsigned int i;
2476 int retval;
2477
2478 printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
2479 brd->ports[0].max_baud);
2480
2481 for (i = 0; i < brd->info->nports; i++) {
2482 info = &brd->ports[i];
2483 tty_port_init(&info->port);
2484 info->board = brd;
2485 info->stop_rx = 0;
2486 info->ldisc_stop_rx = 0;
2487
2488 /* Enhance mode enabled here */
2489 if (brd->chip_flag != MOXA_OTHER_UART)
2490 mxser_enable_must_enchance_mode(info->ioaddr);
2491
2492 info->port.flags = ASYNC_SHARE_IRQ;
2493 info->type = brd->uart_type;
2494
2495 process_txrx_fifo(info);
2496
2497 info->custom_divisor = info->baud_base * 16;
2498 info->port.close_delay = 5 * HZ / 10;
2499 info->port.closing_wait = 30 * HZ;
2500 info->normal_termios = mxvar_sdriver->init_termios;
2501 init_waitqueue_head(&info->delta_msr_wait);
2502 memset(&info->mon_data, 0, sizeof(struct mxser_mon));
2503 info->err_shadow = 0;
2504 spin_lock_init(&info->slock);
2505
2506 /* before set INT ISR, disable all int */
2507 outb(inb(info->ioaddr + UART_IER) & 0xf0,
2508 info->ioaddr + UART_IER);
2509 }
2510
2511 retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
2512 brd);
2513 if (retval) {
2514 printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
2515 "conflict with another device.\n",
2516 brd->info->name, brd->irq);
2517 /* We hold resources, we need to release them. */
2518 mxser_release_res(brd, pdev, 0);
2519 }
2520 return retval;
2521 }
2522
2523 static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
2524 {
2525 int id, i, bits;
2526 unsigned short regs[16], irq;
2527 unsigned char scratch, scratch2;
2528
2529 brd->chip_flag = MOXA_OTHER_UART;
2530
2531 id = mxser_read_register(cap, regs);
2532 switch (id) {
2533 case C168_ASIC_ID:
2534 brd->info = &mxser_cards[0];
2535 break;
2536 case C104_ASIC_ID:
2537 brd->info = &mxser_cards[1];
2538 break;
2539 case CI104J_ASIC_ID:
2540 brd->info = &mxser_cards[2];
2541 break;
2542 case C102_ASIC_ID:
2543 brd->info = &mxser_cards[5];
2544 break;
2545 case CI132_ASIC_ID:
2546 brd->info = &mxser_cards[6];
2547 break;
2548 case CI134_ASIC_ID:
2549 brd->info = &mxser_cards[7];
2550 break;
2551 default:
2552 return 0;
2553 }
2554
2555 irq = 0;
2556 /* some ISA cards have 2 ports, but we want to see them as 4-port (why?)
2557 Flag-hack checks if configuration should be read as 2-port here. */
2558 if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) {
2559 irq = regs[9] & 0xF000;
2560 irq = irq | (irq >> 4);
2561 if (irq != (regs[9] & 0xFF00))
2562 goto err_irqconflict;
2563 } else if (brd->info->nports == 4) {
2564 irq = regs[9] & 0xF000;
2565 irq = irq | (irq >> 4);
2566 irq = irq | (irq >> 8);
2567 if (irq != regs[9])
2568 goto err_irqconflict;
2569 } else if (brd->info->nports == 8) {
2570 irq = regs[9] & 0xF000;
2571 irq = irq | (irq >> 4);
2572 irq = irq | (irq >> 8);
2573 if ((irq != regs[9]) || (irq != regs[10]))
2574 goto err_irqconflict;
2575 }
2576
2577 if (!irq) {
2578 printk(KERN_ERR "mxser: interrupt number unset\n");
2579 return -EIO;
2580 }
2581 brd->irq = ((int)(irq & 0xF000) >> 12);
2582 for (i = 0; i < 8; i++)
2583 brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
2584 if ((regs[12] & 0x80) == 0) {
2585 printk(KERN_ERR "mxser: invalid interrupt vector\n");
2586 return -EIO;
2587 }
2588 brd->vector = (int)regs[11]; /* interrupt vector */
2589 if (id == 1)
2590 brd->vector_mask = 0x00FF;
2591 else
2592 brd->vector_mask = 0x000F;
2593 for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
2594 if (regs[12] & bits) {
2595 brd->ports[i].baud_base = 921600;
2596 brd->ports[i].max_baud = 921600;
2597 } else {
2598 brd->ports[i].baud_base = 115200;
2599 brd->ports[i].max_baud = 115200;
2600 }
2601 }
2602 scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
2603 outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
2604 outb(0, cap + UART_EFR); /* EFR is the same as FCR */
2605 outb(scratch2, cap + UART_LCR);
2606 outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
2607 scratch = inb(cap + UART_IIR);
2608
2609 if (scratch & 0xC0)
2610 brd->uart_type = PORT_16550A;
2611 else
2612 brd->uart_type = PORT_16450;
2613 if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
2614 "mxser(IO)")) {
2615 printk(KERN_ERR "mxser: can't request ports I/O region: "
2616 "0x%.8lx-0x%.8lx\n",
2617 brd->ports[0].ioaddr, brd->ports[0].ioaddr +
2618 8 * brd->info->nports - 1);
2619 return -EIO;
2620 }
2621 if (!request_region(brd->vector, 1, "mxser(vector)")) {
2622 release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
2623 printk(KERN_ERR "mxser: can't request interrupt vector region: "
2624 "0x%.8lx-0x%.8lx\n",
2625 brd->ports[0].ioaddr, brd->ports[0].ioaddr +
2626 8 * brd->info->nports - 1);
2627 return -EIO;
2628 }
2629 return brd->info->nports;
2630
2631 err_irqconflict:
2632 printk(KERN_ERR "mxser: invalid interrupt number\n");
2633 return -EIO;
2634 }
2635
2636 static int __devinit mxser_probe(struct pci_dev *pdev,
2637 const struct pci_device_id *ent)
2638 {
2639 #ifdef CONFIG_PCI
2640 struct mxser_board *brd;
2641 unsigned int i, j;
2642 unsigned long ioaddress;
2643 int retval = -EINVAL;
2644
2645 for (i = 0; i < MXSER_BOARDS; i++)
2646 if (mxser_boards[i].info == NULL)
2647 break;
2648
2649 if (i >= MXSER_BOARDS) {
2650 dev_err(&pdev->dev, "too many boards found (maximum %d), board "
2651 "not configured\n", MXSER_BOARDS);
2652 goto err;
2653 }
2654
2655 brd = &mxser_boards[i];
2656 brd->idx = i * MXSER_PORTS_PER_BOARD;
2657 dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
2658 mxser_cards[ent->driver_data].name,
2659 pdev->bus->number, PCI_SLOT(pdev->devfn));
2660
2661 retval = pci_enable_device(pdev);
2662 if (retval) {
2663 dev_err(&pdev->dev, "PCI enable failed\n");
2664 goto err;
2665 }
2666
2667 /* io address */
2668 ioaddress = pci_resource_start(pdev, 2);
2669 retval = pci_request_region(pdev, 2, "mxser(IO)");
2670 if (retval)
2671 goto err;
2672
2673 brd->info = &mxser_cards[ent->driver_data];
2674 for (i = 0; i < brd->info->nports; i++)
2675 brd->ports[i].ioaddr = ioaddress + 8 * i;
2676
2677 /* vector */
2678 ioaddress = pci_resource_start(pdev, 3);
2679 retval = pci_request_region(pdev, 3, "mxser(vector)");
2680 if (retval)
2681 goto err_relio;
2682 brd->vector = ioaddress;
2683
2684 /* irq */
2685 brd->irq = pdev->irq;
2686
2687 brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr);
2688 brd->uart_type = PORT_16550A;
2689 brd->vector_mask = 0;
2690
2691 for (i = 0; i < brd->info->nports; i++) {
2692 for (j = 0; j < UART_INFO_NUM; j++) {
2693 if (Gpci_uart_info[j].type == brd->chip_flag) {
2694 brd->ports[i].max_baud =
2695 Gpci_uart_info[j].max_baud;
2696
2697 /* exception....CP-102 */
2698 if (brd->info->flags & MXSER_HIGHBAUD)
2699 brd->ports[i].max_baud = 921600;
2700 break;
2701 }
2702 }
2703 }
2704
2705 if (brd->chip_flag == MOXA_MUST_MU860_HWID) {
2706 for (i = 0; i < brd->info->nports; i++) {
2707 if (i < 4)
2708 brd->ports[i].opmode_ioaddr = ioaddress + 4;
2709 else
2710 brd->ports[i].opmode_ioaddr = ioaddress + 0x0c;
2711 }
2712 outb(0, ioaddress + 4); /* default set to RS232 mode */
2713 outb(0, ioaddress + 0x0c); /* default set to RS232 mode */
2714 }
2715
2716 for (i = 0; i < brd->info->nports; i++) {
2717 brd->vector_mask |= (1 << i);
2718 brd->ports[i].baud_base = 921600;
2719 }
2720
2721 /* mxser_initbrd will hook ISR. */
2722 retval = mxser_initbrd(brd, pdev);
2723 if (retval)
2724 goto err_null;
2725
2726 for (i = 0; i < brd->info->nports; i++)
2727 tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
2728
2729 pci_set_drvdata(pdev, brd);
2730
2731 return 0;
2732 err_relio:
2733 pci_release_region(pdev, 2);
2734 err_null:
2735 brd->info = NULL;
2736 err:
2737 return retval;
2738 #else
2739 return -ENODEV;
2740 #endif
2741 }
2742
2743 static void __devexit mxser_remove(struct pci_dev *pdev)
2744 {
2745 struct mxser_board *brd = pci_get_drvdata(pdev);
2746 unsigned int i;
2747
2748 for (i = 0; i < brd->info->nports; i++)
2749 tty_unregister_device(mxvar_sdriver, brd->idx + i);
2750
2751 mxser_release_res(brd, pdev, 1);
2752 brd->info = NULL;
2753 }
2754
2755 static struct pci_driver mxser_driver = {
2756 .name = "mxser",
2757 .id_table = mxser_pcibrds,
2758 .probe = mxser_probe,
2759 .remove = __devexit_p(mxser_remove)
2760 };
2761
2762 static int __init mxser_module_init(void)
2763 {
2764 struct mxser_board *brd;
2765 unsigned int b, i, m;
2766 int retval;
2767
2768 mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
2769 if (!mxvar_sdriver)
2770 return -ENOMEM;
2771
2772 printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
2773 MXSER_VERSION);
2774
2775 /* Initialize the tty_driver structure */
2776 mxvar_sdriver->owner = THIS_MODULE;
2777 mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
2778 mxvar_sdriver->name = "ttyMI";
2779 mxvar_sdriver->major = ttymajor;
2780 mxvar_sdriver->minor_start = 0;
2781 mxvar_sdriver->num = MXSER_PORTS + 1;
2782 mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
2783 mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
2784 mxvar_sdriver->init_termios = tty_std_termios;
2785 mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
2786 mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV;
2787 tty_set_operations(mxvar_sdriver, &mxser_ops);
2788
2789 retval = tty_register_driver(mxvar_sdriver);
2790 if (retval) {
2791 printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family "
2792 "tty driver !\n");
2793 goto err_put;
2794 }
2795
2796 /* Start finding ISA boards here */
2797 for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
2798 if (!ioaddr[b])
2799 continue;
2800
2801 brd = &mxser_boards[m];
2802 retval = mxser_get_ISA_conf(!ioaddr[b], brd);
2803 if (retval <= 0) {
2804 brd->info = NULL;
2805 continue;
2806 }
2807
2808 printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
2809 brd->info->name, ioaddr[b]);
2810
2811 /* mxser_initbrd will hook ISR. */
2812 if (mxser_initbrd(brd, NULL) < 0) {
2813 brd->info = NULL;
2814 continue;
2815 }
2816
2817 brd->idx = m * MXSER_PORTS_PER_BOARD;
2818 for (i = 0; i < brd->info->nports; i++)
2819 tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
2820
2821 m++;
2822 }
2823
2824 retval = pci_register_driver(&mxser_driver);
2825 if (retval) {
2826 printk(KERN_ERR "mxser: can't register pci driver\n");
2827 if (!m) {
2828 retval = -ENODEV;
2829 goto err_unr;
2830 } /* else: we have some ISA cards under control */
2831 }
2832
2833 return 0;
2834 err_unr:
2835 tty_unregister_driver(mxvar_sdriver);
2836 err_put:
2837 put_tty_driver(mxvar_sdriver);
2838 return retval;
2839 }
2840
2841 static void __exit mxser_module_exit(void)
2842 {
2843 unsigned int i, j;
2844
2845 pci_unregister_driver(&mxser_driver);
2846
2847 for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
2848 if (mxser_boards[i].info != NULL)
2849 for (j = 0; j < mxser_boards[i].info->nports; j++)
2850 tty_unregister_device(mxvar_sdriver,
2851 mxser_boards[i].idx + j);
2852 tty_unregister_driver(mxvar_sdriver);
2853 put_tty_driver(mxvar_sdriver);
2854
2855 for (i = 0; i < MXSER_BOARDS; i++)
2856 if (mxser_boards[i].info != NULL)
2857 mxser_release_res(&mxser_boards[i], NULL, 1);
2858 }
2859
2860 module_init(mxser_module_init);
2861 module_exit(mxser_module_exit);
Support for the Chinese Samsung S3C2440 based development boards