2 * arch/blackfin/kernel/setup.c
4 * Copyright 2004-2006 Analog Devices Inc.
6 * Enter bugs at http://blackfin.uclinux.org/
8 * Licensed under the GPL-2 or later.
11 #include <linux/delay.h>
12 #include <linux/console.h>
13 #include <linux/bootmem.h>
14 #include <linux/seq_file.h>
15 #include <linux/cpu.h>
16 #include <linux/module.h>
17 #include <linux/tty.h>
18 #include <linux/pfn.h>
20 #include <linux/ext2_fs.h>
21 #include <linux/cramfs_fs.h>
22 #include <linux/romfs_fs.h>
25 #include <asm/cacheflush.h>
26 #include <asm/blackfin.h>
27 #include <asm/cplbinit.h>
28 #include <asm/div64.h>
29 #include <asm/fixed_code.h>
30 #include <asm/early_printk.h>
32 static DEFINE_PER_CPU(struct cpu
, cpu_devices
);
35 EXPORT_SYMBOL(_bfin_swrst
);
37 unsigned long memory_start
, memory_end
, physical_mem_end
;
38 unsigned long _rambase
, _ramstart
, _ramend
;
39 unsigned long reserved_mem_dcache_on
;
40 unsigned long reserved_mem_icache_on
;
41 EXPORT_SYMBOL(memory_start
);
42 EXPORT_SYMBOL(memory_end
);
43 EXPORT_SYMBOL(physical_mem_end
);
44 EXPORT_SYMBOL(_ramend
);
46 #ifdef CONFIG_MTD_UCLINUX
47 unsigned long memory_mtd_end
, memory_mtd_start
, mtd_size
;
49 EXPORT_SYMBOL(memory_mtd_end
);
50 EXPORT_SYMBOL(memory_mtd_start
);
51 EXPORT_SYMBOL(mtd_size
);
54 char __initdata command_line
[COMMAND_LINE_SIZE
];
56 /* boot memmap, for parsing "memmap=" */
57 #define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
58 #define BFIN_MEMMAP_RAM 1
59 #define BFIN_MEMMAP_RESERVED 2
62 struct bfin_memmap_entry
{
63 unsigned long long addr
; /* start of memory segment */
64 unsigned long long size
;
66 } map
[BFIN_MEMMAP_MAX
];
67 } bfin_memmap __initdata
;
69 /* for memmap sanitization */
70 struct change_member
{
71 struct bfin_memmap_entry
*pentry
; /* pointer to original entry */
72 unsigned long long addr
; /* address for this change point */
74 static struct change_member change_point_list
[2*BFIN_MEMMAP_MAX
] __initdata
;
75 static struct change_member
*change_point
[2*BFIN_MEMMAP_MAX
] __initdata
;
76 static struct bfin_memmap_entry
*overlap_list
[BFIN_MEMMAP_MAX
] __initdata
;
77 static struct bfin_memmap_entry new_map
[BFIN_MEMMAP_MAX
] __initdata
;
79 void __init
bf53x_cache_init(void)
81 #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
82 generate_cpl_tables();
85 #ifdef CONFIG_BFIN_ICACHE
87 printk(KERN_INFO
"Instruction Cache Enabled\n");
90 #ifdef CONFIG_BFIN_DCACHE
92 printk(KERN_INFO
"Data Cache Enabled"
93 # if defined CONFIG_BFIN_WB
95 # elif defined CONFIG_BFIN_WT
102 void __init
bf53x_relocate_l1_mem(void)
104 unsigned long l1_code_length
;
105 unsigned long l1_data_a_length
;
106 unsigned long l1_data_b_length
;
107 unsigned long l2_length
;
109 l1_code_length
= _etext_l1
- _stext_l1
;
110 if (l1_code_length
> L1_CODE_LENGTH
)
111 panic("L1 Instruction SRAM Overflow\n");
112 /* cannot complain as printk is not available as yet.
113 * But we can continue booting and complain later!
116 /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
117 dma_memcpy(_stext_l1
, _l1_lma_start
, l1_code_length
);
119 l1_data_a_length
= _ebss_l1
- _sdata_l1
;
120 if (l1_data_a_length
> L1_DATA_A_LENGTH
)
121 panic("L1 Data SRAM Bank A Overflow\n");
123 /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */
124 dma_memcpy(_sdata_l1
, _l1_lma_start
+ l1_code_length
, l1_data_a_length
);
126 l1_data_b_length
= _ebss_b_l1
- _sdata_b_l1
;
127 if (l1_data_b_length
> L1_DATA_B_LENGTH
)
128 panic("L1 Data SRAM Bank B Overflow\n");
130 /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
131 dma_memcpy(_sdata_b_l1
, _l1_lma_start
+ l1_code_length
+
132 l1_data_a_length
, l1_data_b_length
);
135 l2_length
= _ebss_l2
- _stext_l2
;
136 if (l2_length
> L2_LENGTH
)
137 panic("L2 SRAM Overflow\n");
139 /* Copy _stext_l2 to _edata_l2 to L2 SRAM */
140 dma_memcpy(_stext_l2
, _l2_lma_start
, l2_length
);
144 /* add_memory_region to memmap */
145 static void __init
add_memory_region(unsigned long long start
,
146 unsigned long long size
, int type
)
150 i
= bfin_memmap
.nr_map
;
152 if (i
== BFIN_MEMMAP_MAX
) {
153 printk(KERN_ERR
"Ooops! Too many entries in the memory map!\n");
157 bfin_memmap
.map
[i
].addr
= start
;
158 bfin_memmap
.map
[i
].size
= size
;
159 bfin_memmap
.map
[i
].type
= type
;
160 bfin_memmap
.nr_map
++;
164 * Sanitize the boot memmap, removing overlaps.
166 static int __init
sanitize_memmap(struct bfin_memmap_entry
*map
, int *pnr_map
)
168 struct change_member
*change_tmp
;
169 unsigned long current_type
, last_type
;
170 unsigned long long last_addr
;
171 int chgidx
, still_changing
;
174 int old_nr
, new_nr
, chg_nr
;
178 Visually we're performing the following (1,2,3,4 = memory types)
180 Sample memory map (w/overlaps):
181 ____22__________________
182 ______________________4_
183 ____1111________________
184 _44_____________________
185 11111111________________
186 ____________________33__
187 ___________44___________
188 __________33333_________
189 ______________22________
190 ___________________2222_
191 _________111111111______
192 _____________________11_
193 _________________4______
195 Sanitized equivalent (no overlap):
196 1_______________________
197 _44_____________________
198 ___1____________________
199 ____22__________________
200 ______11________________
201 _________1______________
202 __________3_____________
203 ___________44___________
204 _____________33_________
205 _______________2________
206 ________________1_______
207 _________________4______
208 ___________________2____
209 ____________________33__
210 ______________________4_
212 /* if there's only one memory region, don't bother */
218 /* bail out if we find any unreasonable addresses in memmap */
219 for (i
= 0; i
< old_nr
; i
++)
220 if (map
[i
].addr
+ map
[i
].size
< map
[i
].addr
)
223 /* create pointers for initial change-point information (for sorting) */
224 for (i
= 0; i
< 2*old_nr
; i
++)
225 change_point
[i
] = &change_point_list
[i
];
227 /* record all known change-points (starting and ending addresses),
228 omitting those that are for empty memory regions */
230 for (i
= 0; i
< old_nr
; i
++) {
231 if (map
[i
].size
!= 0) {
232 change_point
[chgidx
]->addr
= map
[i
].addr
;
233 change_point
[chgidx
++]->pentry
= &map
[i
];
234 change_point
[chgidx
]->addr
= map
[i
].addr
+ map
[i
].size
;
235 change_point
[chgidx
++]->pentry
= &map
[i
];
238 chg_nr
= chgidx
; /* true number of change-points */
240 /* sort change-point list by memory addresses (low -> high) */
242 while (still_changing
) {
244 for (i
= 1; i
< chg_nr
; i
++) {
245 /* if <current_addr> > <last_addr>, swap */
246 /* or, if current=<start_addr> & last=<end_addr>, swap */
247 if ((change_point
[i
]->addr
< change_point
[i
-1]->addr
) ||
248 ((change_point
[i
]->addr
== change_point
[i
-1]->addr
) &&
249 (change_point
[i
]->addr
== change_point
[i
]->pentry
->addr
) &&
250 (change_point
[i
-1]->addr
!= change_point
[i
-1]->pentry
->addr
))
252 change_tmp
= change_point
[i
];
253 change_point
[i
] = change_point
[i
-1];
254 change_point
[i
-1] = change_tmp
;
260 /* create a new memmap, removing overlaps */
261 overlap_entries
= 0; /* number of entries in the overlap table */
262 new_entry
= 0; /* index for creating new memmap entries */
263 last_type
= 0; /* start with undefined memory type */
264 last_addr
= 0; /* start with 0 as last starting address */
265 /* loop through change-points, determining affect on the new memmap */
266 for (chgidx
= 0; chgidx
< chg_nr
; chgidx
++) {
267 /* keep track of all overlapping memmap entries */
268 if (change_point
[chgidx
]->addr
== change_point
[chgidx
]->pentry
->addr
) {
269 /* add map entry to overlap list (> 1 entry implies an overlap) */
270 overlap_list
[overlap_entries
++] = change_point
[chgidx
]->pentry
;
272 /* remove entry from list (order independent, so swap with last) */
273 for (i
= 0; i
< overlap_entries
; i
++) {
274 if (overlap_list
[i
] == change_point
[chgidx
]->pentry
)
275 overlap_list
[i
] = overlap_list
[overlap_entries
-1];
279 /* if there are overlapping entries, decide which "type" to use */
280 /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
282 for (i
= 0; i
< overlap_entries
; i
++)
283 if (overlap_list
[i
]->type
> current_type
)
284 current_type
= overlap_list
[i
]->type
;
285 /* continue building up new memmap based on this information */
286 if (current_type
!= last_type
) {
287 if (last_type
!= 0) {
288 new_map
[new_entry
].size
=
289 change_point
[chgidx
]->addr
- last_addr
;
290 /* move forward only if the new size was non-zero */
291 if (new_map
[new_entry
].size
!= 0)
292 if (++new_entry
>= BFIN_MEMMAP_MAX
)
293 break; /* no more space left for new entries */
295 if (current_type
!= 0) {
296 new_map
[new_entry
].addr
= change_point
[chgidx
]->addr
;
297 new_map
[new_entry
].type
= current_type
;
298 last_addr
= change_point
[chgidx
]->addr
;
300 last_type
= current_type
;
303 new_nr
= new_entry
; /* retain count for new entries */
305 /* copy new mapping into original location */
306 memcpy(map
, new_map
, new_nr
*sizeof(struct bfin_memmap_entry
));
312 static void __init
print_memory_map(char *who
)
316 for (i
= 0; i
< bfin_memmap
.nr_map
; i
++) {
317 printk(KERN_DEBUG
" %s: %016Lx - %016Lx ", who
,
318 bfin_memmap
.map
[i
].addr
,
319 bfin_memmap
.map
[i
].addr
+ bfin_memmap
.map
[i
].size
);
320 switch (bfin_memmap
.map
[i
].type
) {
321 case BFIN_MEMMAP_RAM
:
322 printk("(usable)\n");
324 case BFIN_MEMMAP_RESERVED
:
325 printk("(reserved)\n");
327 default: printk("type %lu\n", bfin_memmap
.map
[i
].type
);
333 static __init
int parse_memmap(char *arg
)
335 unsigned long long start_at
, mem_size
;
340 mem_size
= memparse(arg
, &arg
);
342 start_at
= memparse(arg
+1, &arg
);
343 add_memory_region(start_at
, mem_size
, BFIN_MEMMAP_RAM
);
344 } else if (*arg
== '$') {
345 start_at
= memparse(arg
+1, &arg
);
346 add_memory_region(start_at
, mem_size
, BFIN_MEMMAP_RESERVED
);
353 * Initial parsing of the command line. Currently, we support:
354 * - Controlling the linux memory size: mem=xxx[KMG]
355 * - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
356 * $ -> reserved memory is dcacheable
357 * # -> reserved memory is icacheable
358 * - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
359 * @ from <start> to <start>+<mem>, type RAM
360 * $ from <start> to <start>+<mem>, type RESERVED
363 static __init
void parse_cmdline_early(char *cmdline_p
)
365 char c
= ' ', *to
= cmdline_p
;
366 unsigned int memsize
;
369 if (!memcmp(to
, "mem=", 4)) {
371 memsize
= memparse(to
, &to
);
375 } else if (!memcmp(to
, "max_mem=", 8)) {
377 memsize
= memparse(to
, &to
);
379 physical_mem_end
= memsize
;
383 reserved_mem_dcache_on
=
387 reserved_mem_icache_on
=
391 } else if (!memcmp(to
, "earlyprintk=", 12)) {
393 setup_early_printk(to
);
394 } else if (!memcmp(to
, "memmap=", 7)) {
406 * Setup memory defaults from user config.
407 * The physical memory layout looks like:
409 * [_rambase, _ramstart]: kernel image
410 * [memory_start, memory_end]: dynamic memory managed by kernel
411 * [memory_end, _ramend]: reserved memory
412 * [meory_mtd_start(memory_end),
413 * memory_mtd_start + mtd_size]: rootfs (if any)
414 * [_ramend - DMA_UNCACHED_REGION,
415 * _ramend]: uncached DMA region
416 * [_ramend, physical_mem_end]: memory not managed by kernel
419 static __init
void memory_setup(void)
421 #ifdef CONFIG_MTD_UCLINUX
422 unsigned long mtd_phys
= 0;
425 _rambase
= (unsigned long)_stext
;
426 _ramstart
= (unsigned long)_end
;
428 if (DMA_UNCACHED_REGION
> (_ramend
- _ramstart
)) {
430 panic("DMA region exceeds memory limit: %lu.\n",
431 _ramend
- _ramstart
);
433 memory_end
= _ramend
- DMA_UNCACHED_REGION
;
436 /* Round up to multiple of 4MB. */
437 memory_start
= (_ramstart
+ 0x3fffff) & ~0x3fffff;
439 memory_start
= PAGE_ALIGN(_ramstart
);
442 #if defined(CONFIG_MTD_UCLINUX)
443 /* generic memory mapped MTD driver */
444 memory_mtd_end
= memory_end
;
446 mtd_phys
= _ramstart
;
447 mtd_size
= PAGE_ALIGN(*((unsigned long *)(mtd_phys
+ 8)));
449 # if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
450 if (*((unsigned short *)(mtd_phys
+ 0x438)) == EXT2_SUPER_MAGIC
)
452 PAGE_ALIGN(*((unsigned long *)(mtd_phys
+ 0x404)) << 10);
455 # if defined(CONFIG_CRAMFS)
456 if (*((unsigned long *)(mtd_phys
)) == CRAMFS_MAGIC
)
457 mtd_size
= PAGE_ALIGN(*((unsigned long *)(mtd_phys
+ 0x4)));
460 # if defined(CONFIG_ROMFS_FS)
461 if (((unsigned long *)mtd_phys
)[0] == ROMSB_WORD0
462 && ((unsigned long *)mtd_phys
)[1] == ROMSB_WORD1
)
464 PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys
)[2]));
465 # if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
466 /* Due to a Hardware Anomaly we need to limit the size of usable
467 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
468 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
470 # if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
471 if (memory_end
>= 56 * 1024 * 1024)
472 memory_end
= 56 * 1024 * 1024;
474 if (memory_end
>= 60 * 1024 * 1024)
475 memory_end
= 60 * 1024 * 1024;
476 # endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */
477 # endif /* ANOMALY_05000263 */
478 # endif /* CONFIG_ROMFS_FS */
480 memory_end
-= mtd_size
;
484 panic("Don't boot kernel without rootfs attached.\n");
487 /* Relocate MTD image to the top of memory after the uncached memory area */
488 dma_memcpy((char *)memory_end
, _end
, mtd_size
);
490 memory_mtd_start
= memory_end
;
491 _ebss
= memory_mtd_start
; /* define _ebss for compatible */
492 #endif /* CONFIG_MTD_UCLINUX */
494 #if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
495 /* Due to a Hardware Anomaly we need to limit the size of usable
496 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
497 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
499 #if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
500 if (memory_end
>= 56 * 1024 * 1024)
501 memory_end
= 56 * 1024 * 1024;
503 if (memory_end
>= 60 * 1024 * 1024)
504 memory_end
= 60 * 1024 * 1024;
505 #endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */
506 printk(KERN_NOTICE
"Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end
>> 20);
507 #endif /* ANOMALY_05000263 */
510 page_mask_nelts
= ((_ramend
>> PAGE_SHIFT
) + 31) / 32;
511 page_mask_order
= get_order(3 * page_mask_nelts
* sizeof(long));
514 #if !defined(CONFIG_MTD_UCLINUX)
515 /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
516 memory_end
-= SIZE_4K
;
519 init_mm
.start_code
= (unsigned long)_stext
;
520 init_mm
.end_code
= (unsigned long)_etext
;
521 init_mm
.end_data
= (unsigned long)_edata
;
522 init_mm
.brk
= (unsigned long)0;
524 printk(KERN_INFO
"Board Memory: %ldMB\n", physical_mem_end
>> 20);
525 printk(KERN_INFO
"Kernel Managed Memory: %ldMB\n", _ramend
>> 20);
527 printk(KERN_INFO
"Memory map:\n"
528 KERN_INFO
" fixedcode = 0x%p-0x%p\n"
529 KERN_INFO
" text = 0x%p-0x%p\n"
530 KERN_INFO
" rodata = 0x%p-0x%p\n"
531 KERN_INFO
" bss = 0x%p-0x%p\n"
532 KERN_INFO
" data = 0x%p-0x%p\n"
533 KERN_INFO
" stack = 0x%p-0x%p\n"
534 KERN_INFO
" init = 0x%p-0x%p\n"
535 KERN_INFO
" available = 0x%p-0x%p\n"
536 #ifdef CONFIG_MTD_UCLINUX
537 KERN_INFO
" rootfs = 0x%p-0x%p\n"
539 #if DMA_UNCACHED_REGION > 0
540 KERN_INFO
" DMA Zone = 0x%p-0x%p\n"
542 , (void *)FIXED_CODE_START
, (void *)FIXED_CODE_END
,
544 __start_rodata
, __end_rodata
,
545 __bss_start
, __bss_stop
,
547 (void *)&init_thread_union
,
548 (void *)((int)(&init_thread_union
) + 0x2000),
549 __init_begin
, __init_end
,
550 (void *)_ramstart
, (void *)memory_end
551 #ifdef CONFIG_MTD_UCLINUX
552 , (void *)memory_mtd_start
, (void *)(memory_mtd_start
+ mtd_size
)
554 #if DMA_UNCACHED_REGION > 0
555 , (void *)(_ramend
- DMA_UNCACHED_REGION
), (void *)(_ramend
)
561 * Find the lowest, highest page frame number we have available
563 void __init
find_min_max_pfn(void)
568 min_low_pfn
= memory_end
;
570 for (i
= 0; i
< bfin_memmap
.nr_map
; i
++) {
571 unsigned long start
, end
;
573 if (bfin_memmap
.map
[i
].type
!= BFIN_MEMMAP_RAM
)
575 start
= PFN_UP(bfin_memmap
.map
[i
].addr
);
576 end
= PFN_DOWN(bfin_memmap
.map
[i
].addr
+
577 bfin_memmap
.map
[i
].size
);
582 if (start
< min_low_pfn
)
587 static __init
void setup_bootmem_allocator(void)
591 unsigned long start_pfn
, end_pfn
;
592 unsigned long curr_pfn
, last_pfn
, size
;
594 /* mark memory between memory_start and memory_end usable */
595 add_memory_region(memory_start
,
596 memory_end
- memory_start
, BFIN_MEMMAP_RAM
);
597 /* sanity check for overlap */
598 sanitize_memmap(bfin_memmap
.map
, &bfin_memmap
.nr_map
);
599 print_memory_map("boot memmap");
601 /* intialize globals in linux/bootmem.h */
603 /* pfn of the last usable page frame */
604 if (max_pfn
> memory_end
>> PAGE_SHIFT
)
605 max_pfn
= memory_end
>> PAGE_SHIFT
;
606 /* pfn of last page frame directly mapped by kernel */
607 max_low_pfn
= max_pfn
;
608 /* pfn of the first usable page frame after kernel image*/
609 if (min_low_pfn
< memory_start
>> PAGE_SHIFT
)
610 min_low_pfn
= memory_start
>> PAGE_SHIFT
;
612 start_pfn
= PAGE_OFFSET
>> PAGE_SHIFT
;
613 end_pfn
= memory_end
>> PAGE_SHIFT
;
616 * give all the memory to the bootmap allocator, tell it to put the
617 * boot mem_map at the start of memory.
619 bootmap_size
= init_bootmem_node(NODE_DATA(0),
620 memory_start
>> PAGE_SHIFT
, /* map goes here */
623 /* register the memmap regions with the bootmem allocator */
624 for (i
= 0; i
< bfin_memmap
.nr_map
; i
++) {
626 * Reserve usable memory
628 if (bfin_memmap
.map
[i
].type
!= BFIN_MEMMAP_RAM
)
631 * We are rounding up the start address of usable memory:
633 curr_pfn
= PFN_UP(bfin_memmap
.map
[i
].addr
);
634 if (curr_pfn
>= end_pfn
)
637 * ... and at the end of the usable range downwards:
639 last_pfn
= PFN_DOWN(bfin_memmap
.map
[i
].addr
+
640 bfin_memmap
.map
[i
].size
);
642 if (last_pfn
> end_pfn
)
646 * .. finally, did all the rounding and playing
647 * around just make the area go away?
649 if (last_pfn
<= curr_pfn
)
652 size
= last_pfn
- curr_pfn
;
653 free_bootmem(PFN_PHYS(curr_pfn
), PFN_PHYS(size
));
656 /* reserve memory before memory_start, including bootmap */
657 reserve_bootmem(PAGE_OFFSET
,
658 memory_start
+ bootmap_size
+ PAGE_SIZE
- 1 - PAGE_OFFSET
,
662 #define EBSZ_TO_MEG(ebsz) \
665 switch (ebsz & 0xf) { \
666 case 0x1: meg = 16; break; \
667 case 0x3: meg = 32; break; \
668 case 0x5: meg = 64; break; \
669 case 0x7: meg = 128; break; \
670 case 0x9: meg = 256; break; \
671 case 0xb: meg = 512; break; \
675 static inline int __init
get_mem_size(void)
677 #if defined(EBIU_SDBCTL)
678 # if defined(BF561_FAMILY)
680 u32 sdbctl
= bfin_read_EBIU_SDBCTL();
681 ret
+= EBSZ_TO_MEG(sdbctl
>> 0);
682 ret
+= EBSZ_TO_MEG(sdbctl
>> 8);
683 ret
+= EBSZ_TO_MEG(sdbctl
>> 16);
684 ret
+= EBSZ_TO_MEG(sdbctl
>> 24);
687 return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
689 #elif defined(EBIU_DDRCTL1)
690 u32 ddrctl
= bfin_read_EBIU_DDRCTL1();
692 switch (ddrctl
& 0xc0000) {
693 case DEVSZ_64
: ret
= 64 / 8;
694 case DEVSZ_128
: ret
= 128 / 8;
695 case DEVSZ_256
: ret
= 256 / 8;
696 case DEVSZ_512
: ret
= 512 / 8;
698 switch (ddrctl
& 0x30000) {
699 case DEVWD_4
: ret
*= 2;
700 case DEVWD_8
: ret
*= 2;
701 case DEVWD_16
: break;
708 void __init
setup_arch(char **cmdline_p
)
710 unsigned long sclk
, cclk
;
712 #ifdef CONFIG_DUMMY_CONSOLE
713 conswitchp
= &dummy_con
;
716 #if defined(CONFIG_CMDLINE_BOOL)
717 strncpy(&command_line
[0], CONFIG_CMDLINE
, sizeof(command_line
));
718 command_line
[sizeof(command_line
) - 1] = 0;
721 /* Keep a copy of command line */
722 *cmdline_p
= &command_line
[0];
723 memcpy(boot_command_line
, command_line
, COMMAND_LINE_SIZE
);
724 boot_command_line
[COMMAND_LINE_SIZE
- 1] = '\0';
726 /* setup memory defaults from the user config */
727 physical_mem_end
= 0;
728 _ramend
= get_mem_size() * 1024 * 1024;
730 memset(&bfin_memmap
, 0, sizeof(bfin_memmap
));
732 parse_cmdline_early(&command_line
[0]);
734 if (physical_mem_end
== 0)
735 physical_mem_end
= _ramend
;
742 #if !defined(CONFIG_BFIN_KERNEL_CLOCK)
743 if (ANOMALY_05000273
&& cclk
== sclk
)
744 panic("ANOMALY 05000273, SCLK can not be same as CCLK");
748 if (ANOMALY_05000266
) {
749 bfin_read_IMDMA_D0_IRQ_STATUS();
750 bfin_read_IMDMA_D1_IRQ_STATUS();
753 printk(KERN_INFO
"Hardware Trace ");
754 if (bfin_read_TBUFCTL() & 0x1)
758 if (bfin_read_TBUFCTL() & 0x2)
759 printk("and Enabled\n");
761 printk("and Disabled\n");
763 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
764 /* we need to initialize the Flashrom device here since we might
765 * do things with flash early on in the boot
770 _bfin_swrst
= bfin_read_SWRST();
772 if (_bfin_swrst
& RESET_DOUBLE
)
773 printk(KERN_INFO
"Recovering from Double Fault event\n");
774 else if (_bfin_swrst
& RESET_WDOG
)
775 printk(KERN_INFO
"Recovering from Watchdog event\n");
776 else if (_bfin_swrst
& RESET_SOFTWARE
)
777 printk(KERN_NOTICE
"Reset caused by Software reset\n");
779 printk(KERN_INFO
"Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
780 if (bfin_compiled_revid() == 0xffff)
781 printk(KERN_INFO
"Compiled for ADSP-%s Rev any\n", CPU
);
782 else if (bfin_compiled_revid() == -1)
783 printk(KERN_INFO
"Compiled for ADSP-%s Rev none\n", CPU
);
785 printk(KERN_INFO
"Compiled for ADSP-%s Rev 0.%d\n", CPU
, bfin_compiled_revid());
786 if (bfin_revid() != bfin_compiled_revid()) {
787 if (bfin_compiled_revid() == -1)
788 printk(KERN_ERR
"Warning: Compiled for Rev none, but running on Rev %d\n",
790 else if (bfin_compiled_revid() != 0xffff)
791 printk(KERN_ERR
"Warning: Compiled for Rev %d, but running on Rev %d\n",
792 bfin_compiled_revid(), bfin_revid());
794 if (bfin_revid() < SUPPORTED_REVID
)
795 printk(KERN_ERR
"Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
797 printk(KERN_INFO
"Blackfin Linux support by http://blackfin.uclinux.org/\n");
799 printk(KERN_INFO
"Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
800 cclk
/ 1000000, sclk
/ 1000000);
802 if (ANOMALY_05000273
&& (cclk
>> 1) <= sclk
)
803 printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
805 setup_bootmem_allocator();
809 /* Copy atomic sequences to their fixed location, and sanity check that
810 these locations are the ones that we advertise to userspace. */
811 memcpy((void *)FIXED_CODE_START
, &fixed_code_start
,
812 FIXED_CODE_END
- FIXED_CODE_START
);
813 BUG_ON((char *)&sigreturn_stub
- (char *)&fixed_code_start
814 != SIGRETURN_STUB
- FIXED_CODE_START
);
815 BUG_ON((char *)&atomic_xchg32
- (char *)&fixed_code_start
816 != ATOMIC_XCHG32
- FIXED_CODE_START
);
817 BUG_ON((char *)&atomic_cas32
- (char *)&fixed_code_start
818 != ATOMIC_CAS32
- FIXED_CODE_START
);
819 BUG_ON((char *)&atomic_add32
- (char *)&fixed_code_start
820 != ATOMIC_ADD32
- FIXED_CODE_START
);
821 BUG_ON((char *)&atomic_sub32
- (char *)&fixed_code_start
822 != ATOMIC_SUB32
- FIXED_CODE_START
);
823 BUG_ON((char *)&atomic_ior32
- (char *)&fixed_code_start
824 != ATOMIC_IOR32
- FIXED_CODE_START
);
825 BUG_ON((char *)&atomic_and32
- (char *)&fixed_code_start
826 != ATOMIC_AND32
- FIXED_CODE_START
);
827 BUG_ON((char *)&atomic_xor32
- (char *)&fixed_code_start
828 != ATOMIC_XOR32
- FIXED_CODE_START
);
829 BUG_ON((char *)&safe_user_instruction
- (char *)&fixed_code_start
830 != SAFE_USER_INSTRUCTION
- FIXED_CODE_START
);
832 init_exception_vectors();
836 static int __init
topology_init(void)
840 for_each_possible_cpu(cpu
) {
841 struct cpu
*c
= &per_cpu(cpu_devices
, cpu
);
843 register_cpu(c
, cpu
);
849 subsys_initcall(topology_init
);
851 static u_long
get_vco(void)
856 msel
= (bfin_read_PLL_CTL() >> 9) & 0x3F;
860 vco
= CONFIG_CLKIN_HZ
;
861 vco
>>= (1 & bfin_read_PLL_CTL()); /* DF bit */
866 /* Get the Core clock */
867 u_long
get_cclk(void)
870 if (bfin_read_PLL_STAT() & 0x1)
871 return CONFIG_CLKIN_HZ
;
873 ssel
= bfin_read_PLL_DIV();
874 csel
= ((ssel
>> 4) & 0x03);
876 if (ssel
&& ssel
< (1 << csel
)) /* SCLK > CCLK */
877 return get_vco() / ssel
;
878 return get_vco() >> csel
;
880 EXPORT_SYMBOL(get_cclk
);
882 /* Get the System clock */
883 u_long
get_sclk(void)
887 if (bfin_read_PLL_STAT() & 0x1)
888 return CONFIG_CLKIN_HZ
;
890 ssel
= (bfin_read_PLL_DIV() & 0xf);
892 printk(KERN_WARNING
"Invalid System Clock\n");
896 return get_vco() / ssel
;
898 EXPORT_SYMBOL(get_sclk
);
900 unsigned long sclk_to_usecs(unsigned long sclk
)
902 u64 tmp
= USEC_PER_SEC
* (u64
)sclk
;
903 do_div(tmp
, get_sclk());
906 EXPORT_SYMBOL(sclk_to_usecs
);
908 unsigned long usecs_to_sclk(unsigned long usecs
)
910 u64 tmp
= get_sclk() * (u64
)usecs
;
911 do_div(tmp
, USEC_PER_SEC
);
914 EXPORT_SYMBOL(usecs_to_sclk
);
917 * Get CPU information for use by the procfs.
919 static int show_cpuinfo(struct seq_file
*m
, void *v
)
921 char *cpu
, *mmu
, *fpu
, *vendor
, *cache
;
924 u_long cclk
= 0, sclk
= 0;
925 u_int dcache_size
= 0, dsup_banks
= 0;
930 revid
= bfin_revid();
935 switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE
) {
937 vendor
= "Analog Devices";
944 seq_printf(m
, "processor\t: %d\n"
946 "cpu family\t: 0x%x\n"
947 "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
951 (bfin_read_CHIPID() & CHIPID_FAMILY
),
952 cpu
, cclk
/1000000, sclk
/1000000,
960 seq_printf(m
, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
961 cclk
/1000000, cclk
%1000000,
962 sclk
/1000000, sclk
%1000000);
963 seq_printf(m
, "bogomips\t: %lu.%02lu\n"
964 "Calibration\t: %lu loops\n",
965 (loops_per_jiffy
* HZ
) / 500000,
966 ((loops_per_jiffy
* HZ
) / 5000) % 100,
967 (loops_per_jiffy
* HZ
));
969 /* Check Cache configutation */
970 switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P
| 1 << DMC1_P
)) {
972 cache
= "dbank-A/B\t: cache/sram";
977 cache
= "dbank-A/B\t: cache/cache";
982 cache
= "dbank-A/B\t: sram/sram";
993 /* Is it turned on? */
994 if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB
| DMC_ENABLE
)))
997 seq_printf(m
, "cache size\t: %d KB(L1 icache) "
998 "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
999 BFIN_ICACHESIZE
/ 1024, dcache_size
,
1000 #if defined CONFIG_BFIN_WB
1002 #elif defined CONFIG_BFIN_WT
1007 seq_printf(m
, "%s\n", cache
);
1009 seq_printf(m
, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
1010 BFIN_ISUBBANKS
, BFIN_IWAYS
, BFIN_ILINES
);
1012 "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
1013 dsup_banks
, BFIN_DSUBBANKS
, BFIN_DWAYS
,
1015 #ifdef CONFIG_BFIN_ICACHE_LOCK
1016 switch (read_iloc()) {
1018 seq_printf(m
, "Way0 Locked-Down\n");
1021 seq_printf(m
, "Way1 Locked-Down\n");
1024 seq_printf(m
, "Way0,Way1 Locked-Down\n");
1027 seq_printf(m
, "Way2 Locked-Down\n");
1030 seq_printf(m
, "Way0,Way2 Locked-Down\n");
1033 seq_printf(m
, "Way1,Way2 Locked-Down\n");
1036 seq_printf(m
, "Way0,Way1 & Way2 Locked-Down\n");
1039 seq_printf(m
, "Way3 Locked-Down\n");
1042 seq_printf(m
, "Way0,Way3 Locked-Down\n");
1045 seq_printf(m
, "Way1,Way3 Locked-Down\n");
1048 seq_printf(m
, "Way 0,Way1,Way3 Locked-Down\n");
1051 seq_printf(m
, "Way3,Way2 Locked-Down\n");
1054 seq_printf(m
, "Way3,Way2,Way0 Locked-Down\n");
1057 seq_printf(m
, "Way3,Way2,Way1 Locked-Down\n");
1060 seq_printf(m
, "All Ways are locked\n");
1063 seq_printf(m
, "No Ways are locked\n");
1066 seq_printf(m
, "board name\t: %s\n", bfin_board_name
);
1067 seq_printf(m
, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
1068 physical_mem_end
>> 10, (void *)0, (void *)physical_mem_end
);
1069 seq_printf(m
, "kernel memory\t: %d kB (0x%p -> 0x%p)\n",
1070 ((int)memory_end
- (int)_stext
) >> 10,
1072 (void *)memory_end
);
1077 static void *c_start(struct seq_file
*m
, loff_t
*pos
)
1079 return *pos
< NR_CPUS
? ((void *)0x12345678) : NULL
;
1082 static void *c_next(struct seq_file
*m
, void *v
, loff_t
*pos
)
1085 return c_start(m
, pos
);
1088 static void c_stop(struct seq_file
*m
, void *v
)
1092 const struct seq_operations cpuinfo_op
= {
1096 .show
= show_cpuinfo
,
1099 void __init
cmdline_init(const char *r0
)
1102 strncpy(command_line
, r0
, COMMAND_LINE_SIZE
);