hwmon: sht15 humidity sensor driver
[linux-2.6/mini2440.git] / include / asm-generic / vmlinux.lds.h
blob7fa660fd449ca9a3c4a84013f035893ba715a067
1 #ifndef LOAD_OFFSET
2 #define LOAD_OFFSET 0
3 #endif
5 #ifndef VMLINUX_SYMBOL
6 #define VMLINUX_SYMBOL(_sym_) _sym_
7 #endif
9 /* Align . to a 8 byte boundary equals to maximum function alignment. */
10 #define ALIGN_FUNCTION() . = ALIGN(8)
12 /* The actual configuration determine if the init/exit sections
13 * are handled as text/data or they can be discarded (which
14 * often happens at runtime)
16 #ifdef CONFIG_HOTPLUG
17 #define DEV_KEEP(sec) *(.dev##sec)
18 #define DEV_DISCARD(sec)
19 #else
20 #define DEV_KEEP(sec)
21 #define DEV_DISCARD(sec) *(.dev##sec)
22 #endif
24 #ifdef CONFIG_HOTPLUG_CPU
25 #define CPU_KEEP(sec) *(.cpu##sec)
26 #define CPU_DISCARD(sec)
27 #else
28 #define CPU_KEEP(sec)
29 #define CPU_DISCARD(sec) *(.cpu##sec)
30 #endif
32 #if defined(CONFIG_MEMORY_HOTPLUG)
33 #define MEM_KEEP(sec) *(.mem##sec)
34 #define MEM_DISCARD(sec)
35 #else
36 #define MEM_KEEP(sec)
37 #define MEM_DISCARD(sec) *(.mem##sec)
38 #endif
40 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
41 #define MCOUNT_REC() VMLINUX_SYMBOL(__start_mcount_loc) = .; \
42 *(__mcount_loc) \
43 VMLINUX_SYMBOL(__stop_mcount_loc) = .;
44 #else
45 #define MCOUNT_REC()
46 #endif
48 #ifdef CONFIG_TRACE_BRANCH_PROFILING
49 #define LIKELY_PROFILE() VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \
50 *(_ftrace_annotated_branch) \
51 VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .;
52 #else
53 #define LIKELY_PROFILE()
54 #endif
56 #ifdef CONFIG_PROFILE_ALL_BRANCHES
57 #define BRANCH_PROFILE() VMLINUX_SYMBOL(__start_branch_profile) = .; \
58 *(_ftrace_branch) \
59 VMLINUX_SYMBOL(__stop_branch_profile) = .;
60 #else
61 #define BRANCH_PROFILE()
62 #endif
64 #ifdef CONFIG_EVENT_TRACER
65 #define FTRACE_EVENTS() VMLINUX_SYMBOL(__start_ftrace_events) = .; \
66 *(_ftrace_events) \
67 VMLINUX_SYMBOL(__stop_ftrace_events) = .;
68 #else
69 #define FTRACE_EVENTS()
70 #endif
72 #ifdef CONFIG_TRACING
73 #define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .; \
74 *(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \
75 VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .;
76 #else
77 #define TRACE_PRINTKS()
78 #endif
80 #ifdef CONFIG_FTRACE_SYSCALLS
81 #define TRACE_SYSCALLS() VMLINUX_SYMBOL(__start_syscalls_metadata) = .; \
82 *(__syscalls_metadata) \
83 VMLINUX_SYMBOL(__stop_syscalls_metadata) = .;
84 #else
85 #define TRACE_SYSCALLS()
86 #endif
88 /* .data section */
89 #define DATA_DATA \
90 *(.data) \
91 *(.data.init.refok) \
92 *(.ref.data) \
93 DEV_KEEP(init.data) \
94 DEV_KEEP(exit.data) \
95 CPU_KEEP(init.data) \
96 CPU_KEEP(exit.data) \
97 MEM_KEEP(init.data) \
98 MEM_KEEP(exit.data) \
99 . = ALIGN(8); \
100 VMLINUX_SYMBOL(__start___markers) = .; \
101 *(__markers) \
102 VMLINUX_SYMBOL(__stop___markers) = .; \
103 . = ALIGN(32); \
104 VMLINUX_SYMBOL(__start___tracepoints) = .; \
105 *(__tracepoints) \
106 VMLINUX_SYMBOL(__stop___tracepoints) = .; \
107 /* implement dynamic printk debug */ \
108 . = ALIGN(8); \
109 VMLINUX_SYMBOL(__start___verbose) = .; \
110 *(__verbose) \
111 VMLINUX_SYMBOL(__stop___verbose) = .; \
112 LIKELY_PROFILE() \
113 BRANCH_PROFILE() \
114 TRACE_PRINTKS() \
115 FTRACE_EVENTS() \
116 TRACE_SYSCALLS()
118 #define RO_DATA(align) \
119 . = ALIGN((align)); \
120 .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
121 VMLINUX_SYMBOL(__start_rodata) = .; \
122 *(.rodata) *(.rodata.*) \
123 *(__vermagic) /* Kernel version magic */ \
124 *(__markers_strings) /* Markers: strings */ \
125 *(__tracepoints_strings)/* Tracepoints: strings */ \
128 .rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \
129 *(.rodata1) \
132 BUG_TABLE \
134 /* PCI quirks */ \
135 .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
136 VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
137 *(.pci_fixup_early) \
138 VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
139 VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
140 *(.pci_fixup_header) \
141 VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
142 VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \
143 *(.pci_fixup_final) \
144 VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \
145 VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \
146 *(.pci_fixup_enable) \
147 VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \
148 VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
149 *(.pci_fixup_resume) \
150 VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
151 VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \
152 *(.pci_fixup_resume_early) \
153 VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \
154 VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \
155 *(.pci_fixup_suspend) \
156 VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \
159 /* Built-in firmware blobs */ \
160 .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
161 VMLINUX_SYMBOL(__start_builtin_fw) = .; \
162 *(.builtin_fw) \
163 VMLINUX_SYMBOL(__end_builtin_fw) = .; \
166 /* RapidIO route ops */ \
167 .rio_route : AT(ADDR(.rio_route) - LOAD_OFFSET) { \
168 VMLINUX_SYMBOL(__start_rio_route_ops) = .; \
169 *(.rio_route_ops) \
170 VMLINUX_SYMBOL(__end_rio_route_ops) = .; \
173 TRACEDATA \
175 /* Kernel symbol table: Normal symbols */ \
176 __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
177 VMLINUX_SYMBOL(__start___ksymtab) = .; \
178 *(__ksymtab) \
179 VMLINUX_SYMBOL(__stop___ksymtab) = .; \
182 /* Kernel symbol table: GPL-only symbols */ \
183 __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
184 VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
185 *(__ksymtab_gpl) \
186 VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
189 /* Kernel symbol table: Normal unused symbols */ \
190 __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \
191 VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \
192 *(__ksymtab_unused) \
193 VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \
196 /* Kernel symbol table: GPL-only unused symbols */ \
197 __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
198 VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \
199 *(__ksymtab_unused_gpl) \
200 VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \
203 /* Kernel symbol table: GPL-future-only symbols */ \
204 __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
205 VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \
206 *(__ksymtab_gpl_future) \
207 VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \
210 /* Kernel symbol table: Normal symbols */ \
211 __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
212 VMLINUX_SYMBOL(__start___kcrctab) = .; \
213 *(__kcrctab) \
214 VMLINUX_SYMBOL(__stop___kcrctab) = .; \
217 /* Kernel symbol table: GPL-only symbols */ \
218 __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
219 VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \
220 *(__kcrctab_gpl) \
221 VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \
224 /* Kernel symbol table: Normal unused symbols */ \
225 __kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \
226 VMLINUX_SYMBOL(__start___kcrctab_unused) = .; \
227 *(__kcrctab_unused) \
228 VMLINUX_SYMBOL(__stop___kcrctab_unused) = .; \
231 /* Kernel symbol table: GPL-only unused symbols */ \
232 __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
233 VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \
234 *(__kcrctab_unused_gpl) \
235 VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \
238 /* Kernel symbol table: GPL-future-only symbols */ \
239 __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
240 VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \
241 *(__kcrctab_gpl_future) \
242 VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \
245 /* Kernel symbol table: strings */ \
246 __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
247 *(__ksymtab_strings) \
250 /* __*init sections */ \
251 __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \
252 *(.ref.rodata) \
253 MCOUNT_REC() \
254 DEV_KEEP(init.rodata) \
255 DEV_KEEP(exit.rodata) \
256 CPU_KEEP(init.rodata) \
257 CPU_KEEP(exit.rodata) \
258 MEM_KEEP(init.rodata) \
259 MEM_KEEP(exit.rodata) \
262 /* Built-in module parameters. */ \
263 __param : AT(ADDR(__param) - LOAD_OFFSET) { \
264 VMLINUX_SYMBOL(__start___param) = .; \
265 *(__param) \
266 VMLINUX_SYMBOL(__stop___param) = .; \
267 . = ALIGN((align)); \
268 VMLINUX_SYMBOL(__end_rodata) = .; \
270 . = ALIGN((align));
272 /* RODATA provided for backward compatibility.
273 * All archs are supposed to use RO_DATA() */
274 #define RODATA RO_DATA(4096)
276 #define SECURITY_INIT \
277 .security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
278 VMLINUX_SYMBOL(__security_initcall_start) = .; \
279 *(.security_initcall.init) \
280 VMLINUX_SYMBOL(__security_initcall_end) = .; \
283 /* .text section. Map to function alignment to avoid address changes
284 * during second ld run in second ld pass when generating System.map */
285 #define TEXT_TEXT \
286 ALIGN_FUNCTION(); \
287 *(.text.hot) \
288 *(.text) \
289 *(.ref.text) \
290 *(.text.init.refok) \
291 *(.exit.text.refok) \
292 DEV_KEEP(init.text) \
293 DEV_KEEP(exit.text) \
294 CPU_KEEP(init.text) \
295 CPU_KEEP(exit.text) \
296 MEM_KEEP(init.text) \
297 MEM_KEEP(exit.text) \
298 *(.text.unlikely)
301 /* sched.text is aling to function alignment to secure we have same
302 * address even at second ld pass when generating System.map */
303 #define SCHED_TEXT \
304 ALIGN_FUNCTION(); \
305 VMLINUX_SYMBOL(__sched_text_start) = .; \
306 *(.sched.text) \
307 VMLINUX_SYMBOL(__sched_text_end) = .;
309 /* spinlock.text is aling to function alignment to secure we have same
310 * address even at second ld pass when generating System.map */
311 #define LOCK_TEXT \
312 ALIGN_FUNCTION(); \
313 VMLINUX_SYMBOL(__lock_text_start) = .; \
314 *(.spinlock.text) \
315 VMLINUX_SYMBOL(__lock_text_end) = .;
317 #define KPROBES_TEXT \
318 ALIGN_FUNCTION(); \
319 VMLINUX_SYMBOL(__kprobes_text_start) = .; \
320 *(.kprobes.text) \
321 VMLINUX_SYMBOL(__kprobes_text_end) = .;
323 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
324 #define IRQENTRY_TEXT \
325 ALIGN_FUNCTION(); \
326 VMLINUX_SYMBOL(__irqentry_text_start) = .; \
327 *(.irqentry.text) \
328 VMLINUX_SYMBOL(__irqentry_text_end) = .;
329 #else
330 #define IRQENTRY_TEXT
331 #endif
333 /* Section used for early init (in .S files) */
334 #define HEAD_TEXT *(.head.text)
336 /* init and exit section handling */
337 #define INIT_DATA \
338 *(.init.data) \
339 DEV_DISCARD(init.data) \
340 DEV_DISCARD(init.rodata) \
341 CPU_DISCARD(init.data) \
342 CPU_DISCARD(init.rodata) \
343 MEM_DISCARD(init.data) \
344 MEM_DISCARD(init.rodata)
346 #define INIT_TEXT \
347 *(.init.text) \
348 DEV_DISCARD(init.text) \
349 CPU_DISCARD(init.text) \
350 MEM_DISCARD(init.text)
352 #define EXIT_DATA \
353 *(.exit.data) \
354 DEV_DISCARD(exit.data) \
355 DEV_DISCARD(exit.rodata) \
356 CPU_DISCARD(exit.data) \
357 CPU_DISCARD(exit.rodata) \
358 MEM_DISCARD(exit.data) \
359 MEM_DISCARD(exit.rodata)
361 #define EXIT_TEXT \
362 *(.exit.text) \
363 DEV_DISCARD(exit.text) \
364 CPU_DISCARD(exit.text) \
365 MEM_DISCARD(exit.text)
367 /* DWARF debug sections.
368 Symbols in the DWARF debugging sections are relative to
369 the beginning of the section so we begin them at 0. */
370 #define DWARF_DEBUG \
371 /* DWARF 1 */ \
372 .debug 0 : { *(.debug) } \
373 .line 0 : { *(.line) } \
374 /* GNU DWARF 1 extensions */ \
375 .debug_srcinfo 0 : { *(.debug_srcinfo) } \
376 .debug_sfnames 0 : { *(.debug_sfnames) } \
377 /* DWARF 1.1 and DWARF 2 */ \
378 .debug_aranges 0 : { *(.debug_aranges) } \
379 .debug_pubnames 0 : { *(.debug_pubnames) } \
380 /* DWARF 2 */ \
381 .debug_info 0 : { *(.debug_info \
382 .gnu.linkonce.wi.*) } \
383 .debug_abbrev 0 : { *(.debug_abbrev) } \
384 .debug_line 0 : { *(.debug_line) } \
385 .debug_frame 0 : { *(.debug_frame) } \
386 .debug_str 0 : { *(.debug_str) } \
387 .debug_loc 0 : { *(.debug_loc) } \
388 .debug_macinfo 0 : { *(.debug_macinfo) } \
389 /* SGI/MIPS DWARF 2 extensions */ \
390 .debug_weaknames 0 : { *(.debug_weaknames) } \
391 .debug_funcnames 0 : { *(.debug_funcnames) } \
392 .debug_typenames 0 : { *(.debug_typenames) } \
393 .debug_varnames 0 : { *(.debug_varnames) } \
395 /* Stabs debugging sections. */
396 #define STABS_DEBUG \
397 .stab 0 : { *(.stab) } \
398 .stabstr 0 : { *(.stabstr) } \
399 .stab.excl 0 : { *(.stab.excl) } \
400 .stab.exclstr 0 : { *(.stab.exclstr) } \
401 .stab.index 0 : { *(.stab.index) } \
402 .stab.indexstr 0 : { *(.stab.indexstr) } \
403 .comment 0 : { *(.comment) }
405 #ifdef CONFIG_GENERIC_BUG
406 #define BUG_TABLE \
407 . = ALIGN(8); \
408 __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
409 VMLINUX_SYMBOL(__start___bug_table) = .; \
410 *(__bug_table) \
411 VMLINUX_SYMBOL(__stop___bug_table) = .; \
413 #else
414 #define BUG_TABLE
415 #endif
417 #ifdef CONFIG_PM_TRACE
418 #define TRACEDATA \
419 . = ALIGN(4); \
420 .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
421 VMLINUX_SYMBOL(__tracedata_start) = .; \
422 *(.tracedata) \
423 VMLINUX_SYMBOL(__tracedata_end) = .; \
425 #else
426 #define TRACEDATA
427 #endif
429 #define NOTES \
430 .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \
431 VMLINUX_SYMBOL(__start_notes) = .; \
432 *(.note.*) \
433 VMLINUX_SYMBOL(__stop_notes) = .; \
436 #define INITCALLS \
437 *(.initcallearly.init) \
438 VMLINUX_SYMBOL(__early_initcall_end) = .; \
439 *(.initcall0.init) \
440 *(.initcall0s.init) \
441 *(.initcall1.init) \
442 *(.initcall1s.init) \
443 *(.initcall2.init) \
444 *(.initcall2s.init) \
445 *(.initcall3.init) \
446 *(.initcall3s.init) \
447 *(.initcall4.init) \
448 *(.initcall4s.init) \
449 *(.initcall5.init) \
450 *(.initcall5s.init) \
451 *(.initcallrootfs.init) \
452 *(.initcall6.init) \
453 *(.initcall6s.init) \
454 *(.initcall7.init) \
455 *(.initcall7s.init)
458 * PERCPU_VADDR - define output section for percpu area
459 * @vaddr: explicit base address (optional)
460 * @phdr: destination PHDR (optional)
462 * Macro which expands to output section for percpu area. If @vaddr
463 * is not blank, it specifies explicit base address and all percpu
464 * symbols will be offset from the given address. If blank, @vaddr
465 * always equals @laddr + LOAD_OFFSET.
467 * @phdr defines the output PHDR to use if not blank. Be warned that
468 * output PHDR is sticky. If @phdr is specified, the next output
469 * section in the linker script will go there too. @phdr should have
470 * a leading colon.
472 * Note that this macros defines __per_cpu_load as an absolute symbol.
473 * If there is no need to put the percpu section at a predetermined
474 * address, use PERCPU().
476 #define PERCPU_VADDR(vaddr, phdr) \
477 VMLINUX_SYMBOL(__per_cpu_load) = .; \
478 .data.percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load) \
479 - LOAD_OFFSET) { \
480 VMLINUX_SYMBOL(__per_cpu_start) = .; \
481 *(.data.percpu.first) \
482 *(.data.percpu.page_aligned) \
483 *(.data.percpu) \
484 *(.data.percpu.shared_aligned) \
485 VMLINUX_SYMBOL(__per_cpu_end) = .; \
486 } phdr \
487 . = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data.percpu);
490 * PERCPU - define output section for percpu area, simple version
491 * @align: required alignment
493 * Align to @align and outputs output section for percpu area. This
494 * macro doesn't maniuplate @vaddr or @phdr and __per_cpu_load and
495 * __per_cpu_start will be identical.
497 * This macro is equivalent to ALIGN(align); PERCPU_VADDR( , ) except
498 * that __per_cpu_load is defined as a relative symbol against
499 * .data.percpu which is required for relocatable x86_32
500 * configuration.
502 #define PERCPU(align) \
503 . = ALIGN(align); \
504 .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \
505 VMLINUX_SYMBOL(__per_cpu_load) = .; \
506 VMLINUX_SYMBOL(__per_cpu_start) = .; \
507 *(.data.percpu.first) \
508 *(.data.percpu.page_aligned) \
509 *(.data.percpu) \
510 *(.data.percpu.shared_aligned) \
511 VMLINUX_SYMBOL(__per_cpu_end) = .; \