?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86: hookup sys_rt_tgsigqueueinfo
[linux-2.6/mini2440.git] / sound / oss / aedsp16.c
blob3ee9900ffd7b30c6b3a530b75f53a6353f012320
1 /*
2 sound/oss/aedsp16.c
3
4 Audio Excel DSP 16 software configuration routines
5 Copyright (C) 1995,1996,1997,1998 Riccardo Facchetti (fizban@tin.it)
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
21 */
22 /*
23 * Include the main OSS Lite header file. It include all the os, OSS Lite, etc
24 * headers needed by this source.
25 */
26 #include <linux/delay.h>
27 #include <linux/module.h>
28 #include <linux/init.h>
29 #include "sound_config.h"
30
31 /*
32
33 READ THIS
34
35 This module started to configure the Audio Excel DSP 16 Sound Card.
36 Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards.
37
38 NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this
39 audio card and want to see the kernel support for it, please contact me.
40
41 Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401
42 compatible card.
43 It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq),
44 so before this module, the only way to configure the DSP under linux was
45 boot the MS-DOS loading the sound.sys device driver (this driver soft-
46 configure the sound board hardware by massaging someone of its registers),
47 and then ctrl-alt-del to boot linux with the DSP configured by the DOS
48 driver.
49
50 This module works configuring your Audio Excel DSP 16's irq, dma and
51 mpu-401-irq. The OSS Lite routines rely on the fact that if the
52 hardware is there, they can detect it. The problem with AEDSP16 is
53 that no hardware can be found by the probe routines if the sound card
54 is not configured properly. Sometimes the kernel probe routines can find
55 an SBPRO even when the card is not configured (this is the standard setup
56 of the card), but the SBPRO emulation don't work well if the card is not
57 properly initialized. For this reason
58
59 aedsp16_init_board()
60
61 routine is called before the OSS Lite probe routines try to detect the
62 hardware.
63
64 NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS)
65
66 NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards
67 have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They
68 have to be configured by software.
69
70 NOTE: The driver is merged with the new OSS Lite sound driver. It works
71 as a lowlevel driver.
72
73 The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS;
74 the OSS Lite sound driver can be configured for SBPRO and MSS cards
75 at the same time, but the aedsp16 can't be two cards!!
76 When we configure it, we have to choose the SBPRO or the MSS emulation
77 for AEDSP16. We also can install a *REAL* card of the other type (see [1]).
78
79 NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO
80 please let me know if it works.
81
82 The MPU-401 support can be compiled in together with one of the other
83 two operating modes.
84
85 NOTE: This is something like plug-and-play: we have only to plug
86 the AEDSP16 board in the socket, and then configure and compile
87 a kernel that uses the AEDSP16 software configuration capability.
88 No jumper setting is needed!
89
90 For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3
91 you have just to make config the OSS Lite package, configuring
92 the AEDSP16 sound card, then activating the SBPro emulation mode
93 and at last configuring IRQ and DMA.
94 Compile the kernel and run it.
95
96 NOTE: This means for SC-6000 cards that you can choose irq and dma,
97 but not the I/O addresses. To change I/O addresses you have to set
98 them with jumpers. For SC-6600 cards you have no jumpers so you have
99 to set up your full card configuration in the make config.
100
101 You can change the irq/dma/mirq settings WITHOUT THE NEED to open
102 your computer and massage the jumpers (there are no irq/dma/mirq
103 jumpers to be configured anyway, only I/O BASE values have to be
104 configured with jumpers)
105
106 For some ununderstandable reason, the card default of irq 7, dma 1,
107 don't work for me. Seems to be an IRQ or DMA conflict. Under heavy
108 HDD work, the kernel start to erupt out a lot of messages like:
109
110 'Sound: DMA timed out - IRQ/DRQ config error?'
111
112 For what I can say, I have NOT any conflict at irq 7 (under linux I'm
113 using the lp polling driver), and dma line 1 is unused as stated by
114 /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so
115 I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows!
116 Anyway a setting of irq 10, dma 3 works really fine.
117
118 NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know
119 the emulation mode, all the installed hardware and the hardware
120 configuration (irq and dma settings of all the hardware).
121
122 This init module should work with SBPRO+MSS, when one of the two is
123 the AEDSP16 emulation and the other the real card. (see [1])
124 For example:
125
126 AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other
127 AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other
128
129 MPU401 should work. (see [2])
130
131 [1]
132 ---
133 Date: Mon, 29 Jul 1997 08:35:40 +0100
134 From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk>
135
136 [...]
137 Just to let you know got my Audio Excel (emulating a MSS) working
138 with my original SB16, thanks for the driver!
139 [...]
140 ---
141
142 [2] Not tested by me for lack of hardware.
143
144 TODO, WISHES AND TECH
145
146 - About I/O ports allocation -
147
148 Request the 2x0h region (port base) in any case if we are using this card.
149
150 NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16
151 port base region (see code) does not mean necessarily that we are emulating
152 sbpro. Even if this region is the sbpro I/O ports region, we use this
153 region to access the control registers of the card, and if emulating
154 sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro
155 registers are not used, in no way, to emulate an sbpro: they are
156 used only for configuration purposes.
157
158 Started Fri Mar 17 16:13:18 MET 1995
159
160 v0.1 (ALPHA, was a user-level program called AudioExcelDSP16.c)
161 - Initial code.
162 v0.2 (ALPHA)
163 - Cleanups.
164 - Integrated with Linux voxware v 2.90-2 kernel sound driver.
165 - SoundBlaster Pro mode configuration.
166 - Microsoft Sound System mode configuration.
167 - MPU-401 mode configuration.
168 v0.3 (ALPHA)
169 - Cleanups.
170 - Rearranged the code to let aedsp16_init_board be more general.
171 - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h
172 inclusion too. We rely on os.h
173 - Used the to get a variable
174 len string (we are not sure about the len of Copyright string).
175 This works with any SB and compatible.
176 - Added the code to request_region at device init (should go in
177 the main body of voxware).
178 v0.4 (BETA)
179 - Better configure.c patch for aedsp16 configuration (better
180 logic of inclusion of AEDSP16 support)
181 - Modified the conditional compilation to better support more than
182 one sound card of the emulated type (read the NOTES above)
183 - Moved the sb init routine from the attach to the very first
184 probe in sb_card.c
185 - Rearrangements and cleanups
186 - Wiped out some unnecessary code and variables: this is kernel
187 code so it is better save some TEXT and DATA
188 - Fixed the request_region code. We must allocate the aedsp16 (sbpro)
189 I/O ports in any case because they are used to access the DSP
190 configuration registers and we can not allow anyone to get them.
191 v0.5
192 - cleanups on comments
193 - prep for diffs against v3.0-proto-950402
194 v0.6
195 - removed the request_region()s when compiling the MODULE sound.o
196 because we are not allowed (by the actual voxware structure) to
197 release_region()
198 v0.7 (pre ALPHA, not distributed)
199 - started porting this module to kernel 1.3.84. Dummy probe/attach
200 routines.
201 v0.8 (ALPHA)
202 - attached all the init routines.
203 v0.9 (BETA)
204 - Integrated with linux-pre2.0.7
205 - Integrated with configuration scripts.
206 - Cleaned up and beautyfied the code.
207 v0.9.9 (BETA)
208 - Thanks to Piercarlo Grandi: corrected the conditonal compilation code.
209 Now only the code configured is compiled in, with some memory saving.
210 v0.9.10
211 - Integration into the sound/lowlevel/ section of the sound driver.
212 - Re-organized the code.
213 v0.9.11 (not distributed)
214 - Rewritten the init interface-routines to initialize the AEDSP16 in
215 one shot.
216 - More cosmetics.
217 - SC-6600 support.
218 - More soft/hard configuration.
219 v0.9.12
220 - Refined the v0.9.11 code with conditional compilation to distinguish
221 between SC-6000 and SC-6600 code.
222 v1.0.0
223 - Prep for merging with OSS Lite and Linux kernel 2.1.13
224 - Corrected a bug in request/check/release region calls (thanks to the
225 new kernel exception handling).
226 v1.1
227 - Revamped for integration with new modularized sound drivers: to enhance
228 the flexibility of modular version, I have removed all the conditional
229 compilation for SBPRO, MPU and MSS code. Now it is all managed with
230 the ae_config structure.
231 v1.2
232 - Module informations added.
233 - Removed aedsp16_delay_10msec(), now using mdelay(10)
234 - All data and funcs moved to .*.init section.
235 v1.3
236 Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27
237 - got rid of check_region
238
239 Known Problems:
240 - Audio Excel DSP 16 III don't work with this driver.
241
242 Credits:
243 Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a
244 lot in testing the 0.9.11 and 0.9.12 versions of this driver.
245
246 */
247
248
249 #define VERSION "1.3" /* Version of Audio Excel DSP 16 driver */
250
251 #undef AEDSP16_DEBUG /* Define this to 1 to enable debug code */
252 #undef AEDSP16_DEBUG_MORE /* Define this to 1 to enable more debug */
253 #undef AEDSP16_INFO /* Define this to 1 to enable info code */
254
255 #if defined(AEDSP16_DEBUG)
256 # define DBG(x) printk x
257 # if defined(AEDSP16_DEBUG_MORE)
258 # define DBG1(x) printk x
259 # else
260 # define DBG1(x)
261 # endif
262 #else
263 # define DBG(x)
264 # define DBG1(x)
265 #endif
266
267 /*
268 * Misc definitions
269 */
270 #define TRUE 1
271 #define FALSE 0
272
273 /*
274 * Region Size for request/check/release region.
275 */
276 #define IOBASE_REGION_SIZE 0x10
277
278 /*
279 * Hardware related defaults
280 */
281 #define DEF_AEDSP16_IOB 0x220 /* 0x220(default) 0x240 */
282 #define DEF_AEDSP16_IRQ 7 /* 5 7(default) 9 10 11 */
283 #define DEF_AEDSP16_MRQ 0 /* 5 7 9 10 0(default), 0 means disable */
284 #define DEF_AEDSP16_DMA 1 /* 0 1(default) 3 */
285
286 /*
287 * Commands of AEDSP16's DSP (SBPRO+special).
288 * Some of them are COMMAND_xx, in the future they may change.
289 */
290 #define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */
291 #define COMMAND_52 0x52 /* */
292 #define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */
293 #define COMMAND_5C 0x5c /* */
294 #define COMMAND_60 0x60 /* */
295 #define COMMAND_66 0x66 /* */
296 #define COMMAND_6C 0x6c /* */
297 #define COMMAND_6E 0x6e /* */
298 #define COMMAND_88 0x88 /* */
299 #define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */
300 #define COMMAND_C5 0xc5 /* */
301 #define GET_DSP_VERSION 0xe1 /* Get DSP Version */
302 #define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */
303
304 /*
305 * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port
306 * to have the actual I/O port.
307 * Register permissions are:
308 * (wo) == Write Only
309 * (ro) == Read Only
310 * (w-) == Write
311 * (r-) == Read
312 */
313 #define DSP_RESET 0x06 /* offset of DSP RESET (wo) */
314 #define DSP_READ 0x0a /* offset of DSP READ (ro) */
315 #define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */
316 #define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */
317 #define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */
318 #define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */
319
320
321 #define RETRY 10 /* Various retry values on I/O opera- */
322 #define STATUSRETRY 1000 /* tions. Sometimes we have to */
323 #define HARDRETRY 500000 /* wait for previous cmd to complete */
324
325 /*
326 * Size of character arrays that store name and version of sound card
327 */
328 #define CARDNAMELEN 15 /* Size of the card's name in chars */
329 #define CARDVERLEN 2 /* Size of the card's version in chars */
330
331 #if defined(CONFIG_SC6600)
332 /*
333 * Bitmapped flags of hard configuration
334 */
335 /*
336 * Decode macros (xl == low byte, xh = high byte)
337 */
338 #define IOBASE(xl) ((xl & 0x01)?0x240:0x220)
339 #define JOY(xl) (xl & 0x02)
340 #define MPUADDR(xl) ( \
341 (xl & 0x0C)?0x330: \
342 (xl & 0x08)?0x320: \
343 (xl & 0x04)?0x310: \
344 0x300)
345 #define WSSADDR(xl) ((xl & 0x10)?0xE80:0x530)
346 #define CDROM(xh) (xh & 0x20)
347 #define CDROMADDR(xh) (((xh & 0x1F) << 4) + 0x200)
348 /*
349 * Encode macros
350 */
351 #define BLDIOBASE(xl, val) { \
352 xl &= ~0x01; \
353 if (val == 0x240) \
354 xl |= 0x01; \
355 }
356 #define BLDJOY(xl, val) { \
357 xl &= ~0x02; \
358 if (val == 1) \
359 xl |= 0x02; \
360 }
361 #define BLDMPUADDR(xl, val) { \
362 xl &= ~0x0C; \
363 switch (val) { \
364 case 0x330: \
365 xl |= 0x0C; \
366 break; \
367 case 0x320: \
368 xl |= 0x08; \
369 break; \
370 case 0x310: \
371 xl |= 0x04; \
372 break; \
373 case 0x300: \
374 xl |= 0x00; \
375 break; \
376 default: \
377 xl |= 0x00; \
378 break; \
379 } \
380 }
381 #define BLDWSSADDR(xl, val) { \
382 xl &= ~0x10; \
383 if (val == 0xE80) \
384 xl |= 0x10; \
385 }
386 #define BLDCDROM(xh, val) { \
387 xh &= ~0x20; \
388 if (val == 1) \
389 xh |= 0x20; \
390 }
391 #define BLDCDROMADDR(xh, val) { \
392 int tmp = val; \
393 tmp -= 0x200; \
394 tmp >>= 4; \
395 tmp &= 0x1F; \
396 xh |= tmp; \
397 xh &= 0x7F; \
398 xh |= 0x40; \
399 }
400 #endif /* CONFIG_SC6600 */
401
402 /*
403 * Bit mapped flags for calling aedsp16_init_board(), and saving the current
404 * emulation mode.
405 */
406 #define INIT_NONE (0 )
407 #define INIT_SBPRO (1<<0)
408 #define INIT_MSS (1<<1)
409 #define INIT_MPU401 (1<<2)
410
411 static int soft_cfg __initdata = 0; /* bitmapped config */
412 static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */
413 static int ver[CARDVERLEN] __initdata = {0, 0}; /* DSP Ver:
414 hi->ver[0] lo->ver[1] */
415
416 #if defined(CONFIG_SC6600)
417 static int hard_cfg[2] /* lo<-hard_cfg[0] hi<-hard_cfg[1] */
418 __initdata = { 0, 0};
419 #endif /* CONFIG_SC6600 */
420
421 #if defined(CONFIG_SC6600)
422 /* Decoded hard configuration */
423 struct d_hcfg {
424 int iobase;
425 int joystick;
426 int mpubase;
427 int wssbase;
428 int cdrom;
429 int cdrombase;
430 };
431
432 static struct d_hcfg decoded_hcfg __initdata = {0, };
433
434 #endif /* CONFIG_SC6600 */
435
436 /* orVals contain the values to be or'ed */
437 struct orVals {
438 int val; /* irq|mirq|dma */
439 int or; /* soft_cfg |= TheStruct.or */
440 };
441
442 /* aedsp16_info contain the audio card configuration */
443 struct aedsp16_info {
444 int base_io; /* base I/O address for accessing card */
445 int irq; /* irq value for DSP I/O */
446 int mpu_irq; /* irq for mpu401 interface I/O */
447 int dma; /* dma value for DSP I/O */
448 int mss_base; /* base I/O for Microsoft Sound System */
449 int mpu_base; /* base I/O for MPU-401 emulation */
450 int init; /* Initialization status of the card */
451 };
452
453 /*
454 * Magic values that the DSP will eat when configuring irq/mirq/dma
455 */
456 /* DSP IRQ conversion array */
457 static struct orVals orIRQ[] __initdata = {
458 {0x05, 0x28},
459 {0x07, 0x08},
460 {0x09, 0x10},
461 {0x0a, 0x18},
462 {0x0b, 0x20},
463 {0x00, 0x00}
464 };
465
466 /* MPU-401 IRQ conversion array */
467 static struct orVals orMIRQ[] __initdata = {
468 {0x05, 0x04},
469 {0x07, 0x44},
470 {0x09, 0x84},
471 {0x0a, 0xc4},
472 {0x00, 0x00}
473 };
474
475 /* DMA Channels conversion array */
476 static struct orVals orDMA[] __initdata = {
477 {0x00, 0x01},
478 {0x01, 0x02},
479 {0x03, 0x03},
480 {0x00, 0x00}
481 };
482
483 static struct aedsp16_info ae_config = {
484 DEF_AEDSP16_IOB,
485 DEF_AEDSP16_IRQ,
486 DEF_AEDSP16_MRQ,
487 DEF_AEDSP16_DMA,
488 -1,
489 -1,
490 INIT_NONE
491 };
492
493 /*
494 * Buffers to store audio card informations
495 */
496 static char DSPCopyright[CARDNAMELEN + 1] __initdata = {0, };
497 static char DSPVersion[CARDVERLEN + 1] __initdata = {0, };
498
499 static int __init aedsp16_wait_data(int port)
500 {
501 int loop = STATUSRETRY;
502 unsigned char ret = 0;
503
504 DBG1(("aedsp16_wait_data (0x%x): ", port));
505
506 do {
507 ret = inb(port + DSP_DATAVAIL);
508 /*
509 * Wait for data available (bit 7 of ret == 1)
510 */
511 } while (!(ret & 0x80) && loop--);
512
513 if (ret & 0x80) {
514 DBG1(("success.\n"));
515 return TRUE;
516 }
517
518 DBG1(("failure.\n"));
519 return FALSE;
520 }
521
522 static int __init aedsp16_read(int port)
523 {
524 int inbyte;
525
526 DBG((" Read DSP Byte (0x%x): ", port));
527
528 if (aedsp16_wait_data(port) == FALSE) {
529 DBG(("failure.\n"));
530 return -1;
531 }
532
533 inbyte = inb(port + DSP_READ);
534
535 DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte));
536
537 return inbyte;
538 }
539
540 static int __init aedsp16_test_dsp(int port)
541 {
542 return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE);
543 }
544
545 static int __init aedsp16_dsp_reset(int port)
546 {
547 /*
548 * Reset DSP
549 */
550
551 DBG(("Reset DSP:\n"));
552
553 outb(1, (port + DSP_RESET));
554 udelay(10);
555 outb(0, (port + DSP_RESET));
556 udelay(10);
557 udelay(10);
558 if (aedsp16_test_dsp(port) == TRUE) {
559 DBG(("success.\n"));
560 return TRUE;
561 } else
562 DBG(("failure.\n"));
563 return FALSE;
564 }
565
566 static int __init aedsp16_write(int port, int cmd)
567 {
568 unsigned char ret;
569 int loop = HARDRETRY;
570
571 DBG((" Write DSP Byte (0x%x) [0x%x]: ", port, cmd));
572
573 do {
574 ret = inb(port + DSP_STATUS);
575 /*
576 * DSP ready to receive data if bit 7 of ret == 0
577 */
578 if (!(ret & 0x80)) {
579 outb(cmd, port + DSP_COMMAND);
580 DBG(("success.\n"));
581 return 0;
582 }
583 } while (loop--);
584
585 DBG(("timeout.\n"));
586 printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd);
587
588 return -1;
589 }
590
591 #if defined(CONFIG_SC6600)
592
593 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
594 void __init aedsp16_pinfo(void) {
595 DBG(("\n Base address: %x\n", decoded_hcfg.iobase));
596 DBG((" Joystick : %s present\n", decoded_hcfg.joystick?"":" not"));
597 DBG((" WSS addr : %x\n", decoded_hcfg.wssbase));
598 DBG((" MPU-401 addr: %x\n", decoded_hcfg.mpubase));
599 DBG((" CDROM : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not"));
600 DBG((" CDROMADDR : %x\n\n", decoded_hcfg.cdrombase));
601 }
602 #endif
603
604 static void __init aedsp16_hard_decode(void) {
605
606 DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
607
608 /*
609 * Decode Cfg Bytes.
610 */
611 decoded_hcfg.iobase = IOBASE(hard_cfg[0]);
612 decoded_hcfg.joystick = JOY(hard_cfg[0]);
613 decoded_hcfg.wssbase = WSSADDR(hard_cfg[0]);
614 decoded_hcfg.mpubase = MPUADDR(hard_cfg[0]);
615 decoded_hcfg.cdrom = CDROM(hard_cfg[1]);
616 decoded_hcfg.cdrombase = CDROMADDR(hard_cfg[1]);
617
618 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
619 printk(" Original sound card configuration:\n");
620 aedsp16_pinfo();
621 #endif
622
623 /*
624 * Now set up the real kernel configuration.
625 */
626 decoded_hcfg.iobase = ae_config.base_io;
627 decoded_hcfg.wssbase = ae_config.mss_base;
628 decoded_hcfg.mpubase = ae_config.mpu_base;
629
630 #if defined(CONFIG_SC6600_JOY)
631 decoded_hcfg.joystick = CONFIG_SC6600_JOY; /* Enable */
632 #endif
633 #if defined(CONFIG_SC6600_CDROM)
634 decoded_hcfg.cdrom = CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */
635 #endif
636 #if defined(CONFIG_SC6600_CDROMBASE)
637 decoded_hcfg.cdrombase = CONFIG_SC6600_CDROMBASE; /* 0 Disable */
638 #endif
639
640 #if defined(AEDSP16_DEBUG)
641 DBG((" New Values:\n"));
642 aedsp16_pinfo();
643 #endif
644
645 DBG(("success.\n"));
646 }
647
648 static void __init aedsp16_hard_encode(void) {
649
650 DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
651
652 hard_cfg[0] = 0;
653 hard_cfg[1] = 0;
654
655 hard_cfg[0] |= 0x20;
656
657 BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase);
658 BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase);
659 BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase);
660 BLDJOY(hard_cfg[0], decoded_hcfg.joystick);
661 BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom);
662 BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase);
663
664 #if defined(AEDSP16_DEBUG)
665 aedsp16_pinfo();
666 #endif
667
668 DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
669 DBG(("success.\n"));
670
671 }
672
673 static int __init aedsp16_hard_write(int port) {
674
675 DBG(("aedsp16_hard_write:\n"));
676
677 if (aedsp16_write(port, COMMAND_6C)) {
678 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C);
679 DBG(("failure.\n"));
680 return FALSE;
681 }
682 if (aedsp16_write(port, COMMAND_5C)) {
683 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
684 DBG(("failure.\n"));
685 return FALSE;
686 }
687 if (aedsp16_write(port, hard_cfg[0])) {
688 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]);
689 DBG(("failure.\n"));
690 return FALSE;
691 }
692 if (aedsp16_write(port, hard_cfg[1])) {
693 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]);
694 DBG(("failure.\n"));
695 return FALSE;
696 }
697 if (aedsp16_write(port, COMMAND_C5)) {
698 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5);
699 DBG(("failure.\n"));
700 return FALSE;
701 }
702
703 DBG(("success.\n"));
704
705 return TRUE;
706 }
707
708 static int __init aedsp16_hard_read(int port) {
709
710 DBG(("aedsp16_hard_read:\n"));
711
712 if (aedsp16_write(port, READ_HARD_CFG)) {
713 printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG);
714 DBG(("failure.\n"));
715 return FALSE;
716 }
717
718 if ((hard_cfg[0] = aedsp16_read(port)) == -1) {
719 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
720 READ_HARD_CFG);
721 DBG(("failure.\n"));
722 return FALSE;
723 }
724 if ((hard_cfg[1] = aedsp16_read(port)) == -1) {
725 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
726 READ_HARD_CFG);
727 DBG(("failure.\n"));
728 return FALSE;
729 }
730 if (aedsp16_read(port) == -1) {
731 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
732 READ_HARD_CFG);
733 DBG(("failure.\n"));
734 return FALSE;
735 }
736
737 DBG(("success.\n"));
738
739 return TRUE;
740 }
741
742 static int __init aedsp16_ext_cfg_write(int port) {
743
744 int extcfg, val;
745
746 if (aedsp16_write(port, COMMAND_66)) {
747 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66);
748 return FALSE;
749 }
750
751 extcfg = 7;
752 if (decoded_hcfg.cdrom != 2)
753 extcfg = 0x0F;
754 if ((decoded_hcfg.cdrom == 4) ||
755 (decoded_hcfg.cdrom == 3))
756 extcfg &= ~2;
757 if (decoded_hcfg.cdrombase == 0)
758 extcfg &= ~2;
759 if (decoded_hcfg.mpubase == 0)
760 extcfg &= ~1;
761
762 if (aedsp16_write(port, extcfg)) {
763 printk("[AEDSP16] Write extcfg: failed!\n");
764 return FALSE;
765 }
766 if (aedsp16_write(port, 0)) {
767 printk("[AEDSP16] Write extcfg: failed!\n");
768 return FALSE;
769 }
770 if (decoded_hcfg.cdrom == 3) {
771 if (aedsp16_write(port, COMMAND_52)) {
772 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
773 return FALSE;
774 }
775 if ((val = aedsp16_read(port)) == -1) {
776 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n"
777 , COMMAND_52);
778 return FALSE;
779 }
780 val &= 0x7F;
781 if (aedsp16_write(port, COMMAND_60)) {
782 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
783 return FALSE;
784 }
785 if (aedsp16_write(port, val)) {
786 printk("[AEDSP16] Write val: failed!\n");
787 return FALSE;
788 }
789 }
790
791 return TRUE;
792 }
793
794 #endif /* CONFIG_SC6600 */
795
796 static int __init aedsp16_cfg_write(int port) {
797 if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
798 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
799 return FALSE;
800 }
801 if (aedsp16_write(port, soft_cfg)) {
802 printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n");
803 return FALSE;
804 }
805 return TRUE;
806 }
807
808 static int __init aedsp16_init_mss(int port)
809 {
810 DBG(("aedsp16_init_mss:\n"));
811
812 mdelay(10);
813
814 if (aedsp16_write(port, DSP_INIT_MSS)) {
815 printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n",
816 DSP_INIT_MSS);
817 DBG(("failure.\n"));
818 return FALSE;
819 }
820
821 mdelay(10);
822
823 if (aedsp16_cfg_write(port) == FALSE)
824 return FALSE;
825
826 outb(soft_cfg_mss, ae_config.mss_base);
827
828 DBG(("success.\n"));
829
830 return TRUE;
831 }
832
833 static int __init aedsp16_setup_board(int port) {
834 int loop = RETRY;
835
836 #if defined(CONFIG_SC6600)
837 int val = 0;
838
839 if (aedsp16_hard_read(port) == FALSE) {
840 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
841 return FALSE;
842 }
843
844 if (aedsp16_write(port, COMMAND_52)) {
845 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
846 return FALSE;
847 }
848
849 if ((val = aedsp16_read(port)) == -1) {
850 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
851 COMMAND_52);
852 return FALSE;
853 }
854 #endif
855
856 do {
857 if (aedsp16_write(port, COMMAND_88)) {
858 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88);
859 return FALSE;
860 }
861 mdelay(10);
862 } while ((aedsp16_wait_data(port) == FALSE) && loop--);
863
864 if (aedsp16_read(port) == -1) {
865 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
866 COMMAND_88);
867 return FALSE;
868 }
869
870 #if !defined(CONFIG_SC6600)
871 if (aedsp16_write(port, COMMAND_5C)) {
872 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
873 return FALSE;
874 }
875 #endif
876
877 if (aedsp16_cfg_write(port) == FALSE)
878 return FALSE;
879
880 #if defined(CONFIG_SC6600)
881 if (aedsp16_write(port, COMMAND_60)) {
882 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
883 return FALSE;
884 }
885 if (aedsp16_write(port, val)) {
886 printk("[AEDSP16] DATA 0x%x: failed!\n", val);
887 return FALSE;
888 }
889 if (aedsp16_write(port, COMMAND_6E)) {
890 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E);
891 return FALSE;
892 }
893 if (aedsp16_write(port, ver[0])) {
894 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]);
895 return FALSE;
896 }
897 if (aedsp16_write(port, ver[1])) {
898 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]);
899 return FALSE;
900 }
901
902 if (aedsp16_hard_write(port) == FALSE) {
903 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
904 return FALSE;
905 }
906
907 if (aedsp16_write(port, COMMAND_5C)) {
908 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
909 return FALSE;
910 }
911
912 #if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET)
913 if (aedsp16_cfg_write(port) == FALSE)
914 return FALSE;
915 #endif
916
917 #endif
918
919 return TRUE;
920 }
921
922 static int __init aedsp16_stdcfg(int port) {
923 if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
924 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
925 return FALSE;
926 }
927 /*
928 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
929 */
930 if (aedsp16_write(port, 0x0A)) {
931 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
932 return FALSE;
933 }
934 return TRUE;
935 }
936
937 static int __init aedsp16_dsp_version(int port)
938 {
939 int len = 0;
940 int ret;
941
942 DBG(("Get DSP Version:\n"));
943
944 if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) {
945 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION);
946 DBG(("failed.\n"));
947 return FALSE;
948 }
949
950 do {
951 if ((ret = aedsp16_read(port)) == -1) {
952 DBG(("failed.\n"));
953 return FALSE;
954 }
955 /*
956 * We already know how many int are stored (2), so we know when the
957 * string is finished.
958 */
959 ver[len++] = ret;
960 } while (len < CARDVERLEN);
961 sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
962
963 DBG(("success.\n"));
964
965 return TRUE;
966 }
967
968 static int __init aedsp16_dsp_copyright(int port)
969 {
970 int len = 0;
971 int ret;
972
973 DBG(("Get DSP Copyright:\n"));
974
975 if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) {
976 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT);
977 DBG(("failed.\n"));
978 return FALSE;
979 }
980
981 do {
982 if ((ret = aedsp16_read(port)) == -1) {
983 /*
984 * If no more data available, return to the caller, no error if len>0.
985 * We have no other way to know when the string is finished.
986 */
987 if (len)
988 break;
989 else {
990 DBG(("failed.\n"));
991 return FALSE;
992 }
993 }
994
995 DSPCopyright[len++] = ret;
996
997 } while (len < CARDNAMELEN);
998
999 DBG(("success.\n"));
1000
1001 return TRUE;
1002 }
1003
1004 static void __init aedsp16_init_tables(void)
1005 {
1006 int i = 0;
1007
1008 memset(DSPCopyright, 0, CARDNAMELEN + 1);
1009 memset(DSPVersion, 0, CARDVERLEN + 1);
1010
1011 for (i = 0; orIRQ[i].or; i++)
1012 if (orIRQ[i].val == ae_config.irq) {
1013 soft_cfg |= orIRQ[i].or;
1014 soft_cfg_mss |= orIRQ[i].or;
1015 }
1016
1017 for (i = 0; orMIRQ[i].or; i++)
1018 if (orMIRQ[i].or == ae_config.mpu_irq)
1019 soft_cfg |= orMIRQ[i].or;
1020
1021 for (i = 0; orDMA[i].or; i++)
1022 if (orDMA[i].val == ae_config.dma) {
1023 soft_cfg |= orDMA[i].or;
1024 soft_cfg_mss |= orDMA[i].or;
1025 }
1026 }
1027
1028 static int __init aedsp16_init_board(void)
1029 {
1030 aedsp16_init_tables();
1031
1032 if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) {
1033 printk("[AEDSP16] aedsp16_dsp_reset: failed!\n");
1034 return FALSE;
1035 }
1036 if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) {
1037 printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n");
1038 return FALSE;
1039 }
1040
1041 /*
1042 * My AEDSP16 card return SC-6000 in DSPCopyright, so
1043 * if we have something different, we have to be warned.
1044 */
1045 if (strcmp("SC-6000", DSPCopyright))
1046 printk("[AEDSP16] Warning: non SC-6000 audio card!\n");
1047
1048 if (aedsp16_dsp_version(ae_config.base_io) == FALSE) {
1049 printk("[AEDSP16] aedsp16_dsp_version: failed!\n");
1050 return FALSE;
1051 }
1052
1053 if (aedsp16_stdcfg(ae_config.base_io) == FALSE) {
1054 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
1055 return FALSE;
1056 }
1057
1058 #if defined(CONFIG_SC6600)
1059 if (aedsp16_hard_read(ae_config.base_io) == FALSE) {
1060 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
1061 return FALSE;
1062 }
1063
1064 aedsp16_hard_decode();
1065
1066 aedsp16_hard_encode();
1067
1068 if (aedsp16_hard_write(ae_config.base_io) == FALSE) {
1069 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
1070 return FALSE;
1071 }
1072
1073 if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) {
1074 printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n");
1075 return FALSE;
1076 }
1077 #endif /* CONFIG_SC6600 */
1078
1079 if (aedsp16_setup_board(ae_config.base_io) == FALSE) {
1080 printk("[AEDSP16] aedsp16_setup_board: failed!\n");
1081 return FALSE;
1082 }
1083
1084 if (ae_config.mss_base != -1) {
1085 if (ae_config.init & INIT_MSS) {
1086 if (aedsp16_init_mss(ae_config.base_io) == FALSE) {
1087 printk("[AEDSP16] Can not initialize"
1088 "Microsoft Sound System mode.\n");
1089 return FALSE;
1090 }
1091 }
1092 }
1093
1094 #if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
1095
1096 printk("Audio Excel DSP 16 init v%s (%s %s) [",
1097 VERSION, DSPCopyright,
1098 DSPVersion);
1099
1100 if (ae_config.mpu_base != -1) {
1101 if (ae_config.init & INIT_MPU401) {
1102 printk("MPU401");
1103 if ((ae_config.init & INIT_MSS) ||
1104 (ae_config.init & INIT_SBPRO))
1105 printk(" ");
1106 }
1107 }
1108
1109 if (ae_config.mss_base == -1) {
1110 if (ae_config.init & INIT_SBPRO) {
1111 printk("SBPro");
1112 if (ae_config.init & INIT_MSS)
1113 printk(" ");
1114 }
1115 }
1116
1117 if (ae_config.mss_base != -1)
1118 if (ae_config.init & INIT_MSS)
1119 printk("MSS");
1120
1121 printk("]\n");
1122 #endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */
1123
1124 mdelay(10);
1125
1126 return TRUE;
1127 }
1128
1129 static int __init init_aedsp16_sb(void)
1130 {
1131 DBG(("init_aedsp16_sb: "));
1132
1133 /*
1134 * If the card is already init'ed MSS, we can not init it to SBPRO too
1135 * because the board can not emulate simultaneously MSS and SBPRO.
1136 */
1137 if (ae_config.init & INIT_MSS)
1138 return FALSE;
1139 if (ae_config.init & INIT_SBPRO)
1140 return FALSE;
1141
1142 ae_config.init |= INIT_SBPRO;
1143
1144 DBG(("done.\n"));
1145
1146 return TRUE;
1147 }
1148
1149 static void uninit_aedsp16_sb(void)
1150 {
1151 DBG(("uninit_aedsp16_sb: "));
1152
1153 ae_config.init &= ~INIT_SBPRO;
1154
1155 DBG(("done.\n"));
1156 }
1157
1158 static int __init init_aedsp16_mss(void)
1159 {
1160 DBG(("init_aedsp16_mss: "));
1161
1162 /*
1163 * If the card is already init'ed SBPRO, we can not init it to MSS too
1164 * because the board can not emulate simultaneously MSS and SBPRO.
1165 */
1166 if (ae_config.init & INIT_SBPRO)
1167 return FALSE;
1168 if (ae_config.init & INIT_MSS)
1169 return FALSE;
1170 /*
1171 * We must allocate the CONFIG_AEDSP16_BASE region too because these are the
1172 * I/O ports to access card's control registers.
1173 */
1174 if (!(ae_config.init & INIT_MPU401)) {
1175 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1176 "aedsp16 (base)")) {
1177 printk(
1178 "AEDSP16 BASE I/O port region is already in use.\n");
1179 return FALSE;
1180 }
1181 }
1182
1183 ae_config.init |= INIT_MSS;
1184
1185 DBG(("done.\n"));
1186
1187 return TRUE;
1188 }
1189
1190 static void uninit_aedsp16_mss(void)
1191 {
1192 DBG(("uninit_aedsp16_mss: "));
1193
1194 if ((!(ae_config.init & INIT_MPU401)) &&
1195 (ae_config.init & INIT_MSS)) {
1196 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1197 DBG(("AEDSP16 base region released.\n"));
1198 }
1199
1200 ae_config.init &= ~INIT_MSS;
1201 DBG(("done.\n"));
1202 }
1203
1204 static int __init init_aedsp16_mpu(void)
1205 {
1206 DBG(("init_aedsp16_mpu: "));
1207
1208 if (ae_config.init & INIT_MPU401)
1209 return FALSE;
1210
1211 /*
1212 * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O
1213 * ports to access card's control registers.
1214 */
1215 if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) {
1216 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1217 "aedsp16 (base)")) {
1218 printk(
1219 "AEDSP16 BASE I/O port region is already in use.\n");
1220 return FALSE;
1221 }
1222 }
1223
1224 ae_config.init |= INIT_MPU401;
1225
1226 DBG(("done.\n"));
1227
1228 return TRUE;
1229 }
1230
1231 static void uninit_aedsp16_mpu(void)
1232 {
1233 DBG(("uninit_aedsp16_mpu: "));
1234
1235 if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) &&
1236 (ae_config.init & INIT_MPU401)) {
1237 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1238 DBG(("AEDSP16 base region released.\n"));
1239 }
1240
1241 ae_config.init &= ~INIT_MPU401;
1242
1243 DBG(("done.\n"));
1244 }
1245
1246 static int __init init_aedsp16(void)
1247 {
1248 int initialized = FALSE;
1249
1250 DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n",
1251 ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq));
1252
1253 if (ae_config.mss_base == -1) {
1254 if (init_aedsp16_sb() == FALSE) {
1255 uninit_aedsp16_sb();
1256 } else {
1257 initialized = TRUE;
1258 }
1259 }
1260
1261 if (ae_config.mpu_base != -1) {
1262 if (init_aedsp16_mpu() == FALSE) {
1263 uninit_aedsp16_mpu();
1264 } else {
1265 initialized = TRUE;
1266 }
1267 }
1268
1269 /*
1270 * In the sequence of init routines, the MSS init MUST be the last!
1271 * This because of the special register programming the MSS mode needs.
1272 * A board reset would disable the MSS mode restoring the default SBPRO
1273 * mode.
1274 */
1275 if (ae_config.mss_base != -1) {
1276 if (init_aedsp16_mss() == FALSE) {
1277 uninit_aedsp16_mss();
1278 } else {
1279 initialized = TRUE;
1280 }
1281 }
1282
1283 if (initialized)
1284 initialized = aedsp16_init_board();
1285 return initialized;
1286 }
1287
1288 static void __exit uninit_aedsp16(void)
1289 {
1290 if (ae_config.mss_base != -1)
1291 uninit_aedsp16_mss();
1292 else
1293 uninit_aedsp16_sb();
1294 if (ae_config.mpu_base != -1)
1295 uninit_aedsp16_mpu();
1296 }
1297
1298 static int __initdata io = -1;
1299 static int __initdata irq = -1;
1300 static int __initdata dma = -1;
1301 static int __initdata mpu_irq = -1;
1302 static int __initdata mss_base = -1;
1303 static int __initdata mpu_base = -1;
1304
1305 module_param(io, int, 0);
1306 MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)");
1307 module_param(irq, int, 0);
1308 MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)");
1309 module_param(dma, int, 0);
1310 MODULE_PARM_DESC(dma, "dma line (0 1 3)");
1311 module_param(mpu_irq, int, 0);
1312 MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)");
1313 module_param(mss_base, int, 0);
1314 MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)");
1315 module_param(mpu_base, int, 0);
1316 MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)");
1317 MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>");
1318 MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION);
1319 MODULE_LICENSE("GPL");
1320
1321 static int __init do_init_aedsp16(void) {
1322 printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n");
1323 if (io == -1 || dma == -1 || irq == -1) {
1324 printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n");
1325 return -EINVAL;
1326 }
1327
1328 ae_config.base_io = io;
1329 ae_config.irq = irq;
1330 ae_config.dma = dma;
1331
1332 ae_config.mss_base = mss_base;
1333 ae_config.mpu_base = mpu_base;
1334 ae_config.mpu_irq = mpu_irq;
1335
1336 if (init_aedsp16() == FALSE) {
1337 printk(KERN_ERR "aedsp16: initialization failed\n");
1338 /*
1339 * XXX
1340 * What error should we return here ?
1341 */
1342 return -EINVAL;
1343 }
1344 return 0;
1345 }
1346
1347 static void __exit cleanup_aedsp16(void) {
1348 uninit_aedsp16();
1349 }
1350
1351 module_init(do_init_aedsp16);
1352 module_exit(cleanup_aedsp16);
1353
1354 #ifndef MODULE
1355 static int __init setup_aedsp16(char *str)
1356 {
1357 /* io, irq, dma, mss_io, mpu_io, mpu_irq */
1358 int ints[7];
1359
1360 str = get_options(str, ARRAY_SIZE(ints), ints);
1361
1362 io = ints[1];
1363 irq = ints[2];
1364 dma = ints[3];
1365 mss_base = ints[4];
1366 mpu_base = ints[5];
1367 mpu_irq = ints[6];
1368 return 1;
1369 }
1370
1371 __setup("aedsp16=", setup_aedsp16);
1372 #endif
Support for the Chinese Samsung S3C2440 based development boards