pciehp: evaluate _OSC/OSHP before controller init

[linux-2.6/mini2440.git] / drivers / pci / hotplug / pciehp_hpc.c

/*
 * PCI Express PCI Hot Plug Driver
 *
 * Copyright (C) 1995,2001 Compaq Computer Corporation
 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
 * Copyright (C) 2001 IBM Corp.
 * Copyright (C) 2003-2004 Intel Corporation
 *
 * All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 * NON INFRINGEMENT.  See the GNU General Public License for more
 * details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/signal.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/time.h>

#include "../pci.h"
#include "pciehp.h"

static atomic_t pciehp_num_controllers = ATOMIC_INIT(0);

struct ctrl_reg {
        u8 cap_id;
        u8 nxt_ptr;
        u16 cap_reg;
        u32 dev_cap;
        u16 dev_ctrl;
        u16 dev_status;
        u32 lnk_cap;
        u16 lnk_ctrl;
        u16 lnk_status;
        u32 slot_cap;
        u16 slot_ctrl;
        u16 slot_status;
        u16 root_ctrl;
        u16 rsvp;
        u32 root_status;
} __attribute__ ((packed));

/* offsets to the controller registers based on the above structure layout */
enum ctrl_offsets {
        PCIECAPID       =       offsetof(struct ctrl_reg, cap_id),
        NXTCAPPTR       =       offsetof(struct ctrl_reg, nxt_ptr),
        CAPREG          =       offsetof(struct ctrl_reg, cap_reg),
        DEVCAP          =       offsetof(struct ctrl_reg, dev_cap),
        DEVCTRL         =       offsetof(struct ctrl_reg, dev_ctrl),
        DEVSTATUS       =       offsetof(struct ctrl_reg, dev_status),
        LNKCAP          =       offsetof(struct ctrl_reg, lnk_cap),
        LNKCTRL         =       offsetof(struct ctrl_reg, lnk_ctrl),
        LNKSTATUS       =       offsetof(struct ctrl_reg, lnk_status),
        SLOTCAP         =       offsetof(struct ctrl_reg, slot_cap),
        SLOTCTRL        =       offsetof(struct ctrl_reg, slot_ctrl),
        SLOTSTATUS      =       offsetof(struct ctrl_reg, slot_status),
        ROOTCTRL        =       offsetof(struct ctrl_reg, root_ctrl),
        ROOTSTATUS      =       offsetof(struct ctrl_reg, root_status),
};

static inline int pciehp_readw(struct controller *ctrl, int reg, u16 *value)
{
        struct pci_dev *dev = ctrl->pci_dev;
        return pci_read_config_word(dev, ctrl->cap_base + reg, value);
}

static inline int pciehp_readl(struct controller *ctrl, int reg, u32 *value)
{
        struct pci_dev *dev = ctrl->pci_dev;
        return pci_read_config_dword(dev, ctrl->cap_base + reg, value);
}

static inline int pciehp_writew(struct controller *ctrl, int reg, u16 value)
{
        struct pci_dev *dev = ctrl->pci_dev;
        return pci_write_config_word(dev, ctrl->cap_base + reg, value);
}

static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value)
{
        struct pci_dev *dev = ctrl->pci_dev;
        return pci_write_config_dword(dev, ctrl->cap_base + reg, value);
}

/* Field definitions in PCI Express Capabilities Register */
#define CAP_VER                 0x000F
#define DEV_PORT_TYPE           0x00F0
#define SLOT_IMPL               0x0100
#define MSG_NUM                 0x3E00

/* Device or Port Type */
#define NAT_ENDPT               0x00
#define LEG_ENDPT               0x01
#define ROOT_PORT               0x04
#define UP_STREAM               0x05
#define DN_STREAM               0x06
#define PCIE_PCI_BRDG           0x07
#define PCI_PCIE_BRDG           0x10

/* Field definitions in Device Capabilities Register */
#define DATTN_BUTTN_PRSN        0x1000
#define DATTN_LED_PRSN          0x2000
#define DPWR_LED_PRSN           0x4000

/* Field definitions in Link Capabilities Register */
#define MAX_LNK_SPEED           0x000F
#define MAX_LNK_WIDTH           0x03F0

/* Link Width Encoding */
#define LNK_X1          0x01
#define LNK_X2          0x02
#define LNK_X4          0x04
#define LNK_X8          0x08
#define LNK_X12         0x0C
#define LNK_X16         0x10
#define LNK_X32         0x20

/*Field definitions of Link Status Register */
#define LNK_SPEED       0x000F
#define NEG_LINK_WD     0x03F0
#define LNK_TRN_ERR     0x0400
#define LNK_TRN         0x0800
#define SLOT_CLK_CONF   0x1000

/* Field definitions in Slot Capabilities Register */
#define ATTN_BUTTN_PRSN 0x00000001
#define PWR_CTRL_PRSN   0x00000002
#define MRL_SENS_PRSN   0x00000004
#define ATTN_LED_PRSN   0x00000008
#define PWR_LED_PRSN    0x00000010
#define HP_SUPR_RM_SUP  0x00000020
#define HP_CAP          0x00000040
#define SLOT_PWR_VALUE  0x000003F8
#define SLOT_PWR_LIMIT  0x00000C00
#define PSN             0xFFF80000      /* PSN: Physical Slot Number */

/* Field definitions in Slot Control Register */
#define ATTN_BUTTN_ENABLE               0x0001
#define PWR_FAULT_DETECT_ENABLE         0x0002
#define MRL_DETECT_ENABLE               0x0004
#define PRSN_DETECT_ENABLE              0x0008
#define CMD_CMPL_INTR_ENABLE            0x0010
#define HP_INTR_ENABLE                  0x0020
#define ATTN_LED_CTRL                   0x00C0
#define PWR_LED_CTRL                    0x0300
#define PWR_CTRL                        0x0400
#define EMI_CTRL                        0x0800

/* Attention indicator and Power indicator states */
#define LED_ON          0x01
#define LED_BLINK       0x10
#define LED_OFF         0x11

/* Power Control Command */
#define POWER_ON        0
#define POWER_OFF       0x0400

/* EMI Status defines */
#define EMI_DISENGAGED  0
#define EMI_ENGAGED     1

/* Field definitions in Slot Status Register */
#define ATTN_BUTTN_PRESSED      0x0001
#define PWR_FAULT_DETECTED      0x0002
#define MRL_SENS_CHANGED        0x0004
#define PRSN_DETECT_CHANGED     0x0008
#define CMD_COMPLETED           0x0010
#define MRL_STATE               0x0020
#define PRSN_STATE              0x0040
#define EMI_STATE               0x0080
#define EMI_STATUS_BIT          7

static irqreturn_t pcie_isr(int irq, void *dev_id);
static void start_int_poll_timer(struct controller *ctrl, int sec);

/* This is the interrupt polling timeout function. */
static void int_poll_timeout(unsigned long data)
{
        struct controller *ctrl = (struct controller *)data;

        /* Poll for interrupt events.  regs == NULL => polling */
        pcie_isr(0, ctrl);

        init_timer(&ctrl->poll_timer);
        if (!pciehp_poll_time)
                pciehp_poll_time = 2; /* default polling interval is 2 sec */

        start_int_poll_timer(ctrl, pciehp_poll_time);
}

/* This function starts the interrupt polling timer. */
static void start_int_poll_timer(struct controller *ctrl, int sec)
{
        /* Clamp to sane value */
        if ((sec <= 0) || (sec > 60))
                sec = 2;

        ctrl->poll_timer.function = &int_poll_timeout;
        ctrl->poll_timer.data = (unsigned long)ctrl;
        ctrl->poll_timer.expires = jiffies + sec * HZ;
        add_timer(&ctrl->poll_timer);
}

static inline int pciehp_request_irq(struct controller *ctrl)
{
        int retval, irq = ctrl->pci_dev->irq;

        /* Install interrupt polling timer. Start with 10 sec delay */
        if (pciehp_poll_mode) {
                init_timer(&ctrl->poll_timer);
                start_int_poll_timer(ctrl, 10);
                return 0;
        }

        /* Installs the interrupt handler */
        retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl);
        if (retval)
                err("Cannot get irq %d for the hotplug controller\n", irq);
        return retval;
}

static inline void pciehp_free_irq(struct controller *ctrl)
{
        if (pciehp_poll_mode)
                del_timer_sync(&ctrl->poll_timer);
        else
                free_irq(ctrl->pci_dev->irq, ctrl);
}

static inline int pcie_poll_cmd(struct controller *ctrl)
{
        u16 slot_status;
        int timeout = 1000;

        if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
                if (slot_status & CMD_COMPLETED)
                        goto completed;
        for (timeout = 1000; timeout > 0; timeout -= 100) {
                msleep(100);
                if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
                        if (slot_status & CMD_COMPLETED)
                                goto completed;
        }
        return 0;       /* timeout */

completed:
        pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
        return timeout;
}

static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
{
        int retval = 0;
        unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
        unsigned long timeout = msecs_to_jiffies(msecs);
        int rc;

        if (poll)
                rc = pcie_poll_cmd(ctrl);
        else
                rc = wait_event_interruptible_timeout(ctrl->queue,
                                              !ctrl->cmd_busy, timeout);
        if (!rc)
                dbg("Command not completed in 1000 msec\n");
        else if (rc < 0) {
                retval = -EINTR;
                info("Command was interrupted by a signal\n");
        }

        return retval;
}

/**
 * pcie_write_cmd - Issue controller command
 * @ctrl: controller to which the command is issued
 * @cmd:  command value written to slot control register
 * @mask: bitmask of slot control register to be modified
 */
static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
{
        int retval = 0;
        u16 slot_status;
        u16 slot_ctrl;

        mutex_lock(&ctrl->ctrl_lock);

        retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
        if (retval) {
                err("%s: Cannot read SLOTSTATUS register\n", __func__);
                goto out;
        }

        if (slot_status & CMD_COMPLETED) {
                if (!ctrl->no_cmd_complete) {
                        /*
                         * After 1 sec and CMD_COMPLETED still not set, just
                         * proceed forward to issue the next command according
                         * to spec. Just print out the error message.
                         */
                        dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
                            __func__);
                } else if (!NO_CMD_CMPL(ctrl)) {
                        /*
                         * This controller semms to notify of command completed
                         * event even though it supports none of power
                         * controller, attention led, power led and EMI.
                         */
                        dbg("%s: Unexpected CMD_COMPLETED. Need to wait for "
                            "command completed event.\n", __func__);
                        ctrl->no_cmd_complete = 0;
                } else {
                        dbg("%s: Unexpected CMD_COMPLETED. Maybe the "
                            "controller is broken.\n", __func__);
                }
        }

        retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
        if (retval) {
                err("%s: Cannot read SLOTCTRL register\n", __func__);
                goto out;
        }

        slot_ctrl &= ~mask;
        slot_ctrl |= (cmd & mask);
        /* Don't enable command completed if caller is changing it. */
        if (!(mask & CMD_CMPL_INTR_ENABLE))
                slot_ctrl |= CMD_CMPL_INTR_ENABLE;

        ctrl->cmd_busy = 1;
        smp_mb();
        retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
        if (retval)
                err("%s: Cannot write to SLOTCTRL register\n", __func__);

        /*
         * Wait for command completion.
         */
        if (!retval && !ctrl->no_cmd_complete) {
                int poll = 0;
                /*
                 * if hotplug interrupt is not enabled or command
                 * completed interrupt is not enabled, we need to poll
                 * command completed event.
                 */
                if (!(slot_ctrl & HP_INTR_ENABLE) ||
                    !(slot_ctrl & CMD_CMPL_INTR_ENABLE))
                        poll = 1;
                retval = pcie_wait_cmd(ctrl, poll);
        }
 out:
        mutex_unlock(&ctrl->ctrl_lock);
        return retval;
}

static int hpc_check_lnk_status(struct controller *ctrl)
{
        u16 lnk_status;
        int retval = 0;

        retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status);
        if (retval) {
                err("%s: Cannot read LNKSTATUS register\n", __func__);
                return retval;
        }

        dbg("%s: lnk_status = %x\n", __func__, lnk_status);
        if ( (lnk_status & LNK_TRN) || (lnk_status & LNK_TRN_ERR) ||
                !(lnk_status & NEG_LINK_WD)) {
                err("%s : Link Training Error occurs \n", __func__);
                retval = -1;
                return retval;
        }

        return retval;
}

static int hpc_get_attention_status(struct slot *slot, u8 *status)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_ctrl;
        u8 atten_led_state;
        int retval = 0;

        retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
        if (retval) {
                err("%s: Cannot read SLOTCTRL register\n", __func__);
                return retval;
        }

        dbg("%s: SLOTCTRL %x, value read %x\n",
            __func__, ctrl->cap_base + SLOTCTRL, slot_ctrl);

        atten_led_state = (slot_ctrl & ATTN_LED_CTRL) >> 6;

        switch (atten_led_state) {
        case 0:
                *status = 0xFF; /* Reserved */
                break;
        case 1:
                *status = 1;    /* On */
                break;
        case 2:
                *status = 2;    /* Blink */
                break;
        case 3:
                *status = 0;    /* Off */
                break;
        default:
                *status = 0xFF;
                break;
        }

        return 0;
}

static int hpc_get_power_status(struct slot *slot, u8 *status)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_ctrl;
        u8 pwr_state;
        int     retval = 0;

        retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
        if (retval) {
                err("%s: Cannot read SLOTCTRL register\n", __func__);
                return retval;
        }
        dbg("%s: SLOTCTRL %x value read %x\n",
            __func__, ctrl->cap_base + SLOTCTRL, slot_ctrl);

        pwr_state = (slot_ctrl & PWR_CTRL) >> 10;

        switch (pwr_state) {
        case 0:
                *status = 1;
                break;
        case 1:
                *status = 0;
                break;
        default:
                *status = 0xFF;
                break;
        }

        return retval;
}

static int hpc_get_latch_status(struct slot *slot, u8 *status)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_status;
        int retval = 0;

        retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
        if (retval) {
                err("%s: Cannot read SLOTSTATUS register\n", __func__);
                return retval;
        }

        *status = (((slot_status & MRL_STATE) >> 5) == 0) ? 0 : 1;

        return 0;
}

static int hpc_get_adapter_status(struct slot *slot, u8 *status)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_status;
        u8 card_state;
        int retval = 0;

        retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
        if (retval) {
                err("%s: Cannot read SLOTSTATUS register\n", __func__);
                return retval;
        }
        card_state = (u8)((slot_status & PRSN_STATE) >> 6);
        *status = (card_state == 1) ? 1 : 0;

        return 0;
}

static int hpc_query_power_fault(struct slot *slot)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_status;
        u8 pwr_fault;
        int retval = 0;

        retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
        if (retval) {
                err("%s: Cannot check for power fault\n", __func__);
                return retval;
        }
        pwr_fault = (u8)((slot_status & PWR_FAULT_DETECTED) >> 1);

        return pwr_fault;
}

static int hpc_get_emi_status(struct slot *slot, u8 *status)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_status;
        int retval = 0;

        retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
        if (retval) {
                err("%s : Cannot check EMI status\n", __func__);
                return retval;
        }
        *status = (slot_status & EMI_STATE) >> EMI_STATUS_BIT;

        return retval;
}

static int hpc_toggle_emi(struct slot *slot)
{
        u16 slot_cmd;
        u16 cmd_mask;
        int rc;

        slot_cmd = EMI_CTRL;
        cmd_mask = EMI_CTRL;
        rc = pcie_write_cmd(slot->ctrl, slot_cmd, cmd_mask);
        slot->last_emi_toggle = get_seconds();

        return rc;
}

static int hpc_set_attention_status(struct slot *slot, u8 value)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_cmd;
        u16 cmd_mask;
        int rc;

        cmd_mask = ATTN_LED_CTRL;
        switch (value) {
                case 0 :        /* turn off */
                        slot_cmd = 0x00C0;
                        break;
                case 1:         /* turn on */
                        slot_cmd = 0x0040;
                        break;
                case 2:         /* turn blink */
                        slot_cmd = 0x0080;
                        break;
                default:
                        return -1;
        }
        rc = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
        dbg("%s: SLOTCTRL %x write cmd %x\n",
            __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);

        return rc;
}

static void hpc_set_green_led_on(struct slot *slot)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_cmd;
        u16 cmd_mask;

        slot_cmd = 0x0100;
        cmd_mask = PWR_LED_CTRL;
        pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
        dbg("%s: SLOTCTRL %x write cmd %x\n",
            __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
}

static void hpc_set_green_led_off(struct slot *slot)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_cmd;
        u16 cmd_mask;

        slot_cmd = 0x0300;
        cmd_mask = PWR_LED_CTRL;
        pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
        dbg("%s: SLOTCTRL %x write cmd %x\n",
            __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
}

static void hpc_set_green_led_blink(struct slot *slot)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_cmd;
        u16 cmd_mask;

        slot_cmd = 0x0200;
        cmd_mask = PWR_LED_CTRL;
        pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
        dbg("%s: SLOTCTRL %x write cmd %x\n",
            __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
}

static void hpc_release_ctlr(struct controller *ctrl)
{
        /* Mask Hot-plug Interrupt Enable */
        if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE))
                err("%s: Cannot mask hotplut interrupt enable\n", __func__);

        /* Free interrupt handler or interrupt polling timer */
        pciehp_free_irq(ctrl);

        /*
         * If this is the last controller to be released, destroy the
         * pciehp work queue
         */
        if (atomic_dec_and_test(&pciehp_num_controllers))
                destroy_workqueue(pciehp_wq);
}

static int hpc_power_on_slot(struct slot * slot)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_cmd;
        u16 cmd_mask;
        u16 slot_status;
        int retval = 0;

        dbg("%s: slot->hp_slot %x\n", __func__, slot->hp_slot);

        /* Clear sticky power-fault bit from previous power failures */
        retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
        if (retval) {
                err("%s: Cannot read SLOTSTATUS register\n", __func__);
                return retval;
        }
        slot_status &= PWR_FAULT_DETECTED;
        if (slot_status) {
                retval = pciehp_writew(ctrl, SLOTSTATUS, slot_status);
                if (retval) {
                        err("%s: Cannot write to SLOTSTATUS register\n",
                            __func__);
                        return retval;
                }
        }

        slot_cmd = POWER_ON;
        cmd_mask = PWR_CTRL;
        /* Enable detection that we turned off at slot power-off time */
        if (!pciehp_poll_mode) {
                slot_cmd |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE |
                             PRSN_DETECT_ENABLE);
                cmd_mask |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE |
                             PRSN_DETECT_ENABLE);
        }

        retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);

        if (retval) {
                err("%s: Write %x command failed!\n", __func__, slot_cmd);
                return -1;
        }
        dbg("%s: SLOTCTRL %x write cmd %x\n",
            __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);

        return retval;
}

static inline int pcie_mask_bad_dllp(struct controller *ctrl)
{
        struct pci_dev *dev = ctrl->pci_dev;
        int pos;
        u32 reg;

        pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
        if (!pos)
                return 0;
        pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg);
        if (reg & PCI_ERR_COR_BAD_DLLP)
                return 0;
        reg |= PCI_ERR_COR_BAD_DLLP;
        pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg);
        return 1;
}

static inline void pcie_unmask_bad_dllp(struct controller *ctrl)
{
        struct pci_dev *dev = ctrl->pci_dev;
        u32 reg;
        int pos;

        pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
        if (!pos)
                return;
        pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg);
        if (!(reg & PCI_ERR_COR_BAD_DLLP))
                return;
        reg &= ~PCI_ERR_COR_BAD_DLLP;
        pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg);
}

static int hpc_power_off_slot(struct slot * slot)
{
        struct controller *ctrl = slot->ctrl;
        u16 slot_cmd;
        u16 cmd_mask;
        int retval = 0;
        int changed;

        dbg("%s: slot->hp_slot %x\n", __func__, slot->hp_slot);

        /*
         * Set Bad DLLP Mask bit in Correctable Error Mask
         * Register. This is the workaround against Bad DLLP error
         * that sometimes happens during turning power off the slot
         * which conforms to PCI Express 1.0a spec.
         */
        changed = pcie_mask_bad_dllp(ctrl);

        slot_cmd = POWER_OFF;
        cmd_mask = PWR_CTRL;
        /*
         * If we get MRL or presence detect interrupts now, the isr
         * will notice the sticky power-fault bit too and issue power
         * indicator change commands. This will lead to an endless loop
         * of command completions, since the power-fault bit remains on
         * till the slot is powered on again.
         */
        if (!pciehp_poll_mode) {
                slot_cmd &= ~(PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE |
                              PRSN_DETECT_ENABLE);
                cmd_mask |= (PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE |
                             PRSN_DETECT_ENABLE);
        }

        retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
        if (retval) {
                err("%s: Write command failed!\n", __func__);
                retval = -1;
                goto out;
        }
        dbg("%s: SLOTCTRL %x write cmd %x\n",
            __func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
 out:
        if (changed)
                pcie_unmask_bad_dllp(ctrl);

        return retval;
}

static irqreturn_t pcie_isr(int irq, void *dev_id)
{
        struct controller *ctrl = (struct controller *)dev_id;
        u16 detected, intr_loc;
        struct slot *p_slot;

        /*
         * In order to guarantee that all interrupt events are
         * serviced, we need to re-inspect Slot Status register after
         * clearing what is presumed to be the last pending interrupt.
         */
        intr_loc = 0;
        do {
                if (pciehp_readw(ctrl, SLOTSTATUS, &detected)) {
                        err("%s: Cannot read SLOTSTATUS\n", __func__);
                        return IRQ_NONE;
                }

                detected &= (ATTN_BUTTN_PRESSED | PWR_FAULT_DETECTED |
                             MRL_SENS_CHANGED | PRSN_DETECT_CHANGED |
                             CMD_COMPLETED);
                intr_loc |= detected;
                if (!intr_loc)
                        return IRQ_NONE;
                if (pciehp_writew(ctrl, SLOTSTATUS, detected)) {
                        err("%s: Cannot write to SLOTSTATUS\n", __func__);
                        return IRQ_NONE;
                }
        } while (detected);

        dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc);

        /* Check Command Complete Interrupt Pending */
        if (intr_loc & CMD_COMPLETED) {
                ctrl->cmd_busy = 0;
                smp_mb();
                wake_up_interruptible(&ctrl->queue);
        }

        if (!(intr_loc & ~CMD_COMPLETED))
                return IRQ_HANDLED;

        /*
         * Return without handling events if this handler routine is
         * called before controller initialization is done. This may
         * happen if hotplug event or another interrupt that shares
         * the IRQ with pciehp arrives before slot initialization is
         * done after interrupt handler is registered.
         *
         * FIXME - Need more structural fixes. We need to be ready to
         * handle the event before installing interrupt handler.
         */
        p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
        if (!p_slot || !p_slot->hpc_ops)
                return IRQ_HANDLED;

        /* Check MRL Sensor Changed */
        if (intr_loc & MRL_SENS_CHANGED)
                pciehp_handle_switch_change(p_slot);

        /* Check Attention Button Pressed */
        if (intr_loc & ATTN_BUTTN_PRESSED)
                pciehp_handle_attention_button(p_slot);

        /* Check Presence Detect Changed */
        if (intr_loc & PRSN_DETECT_CHANGED)
                pciehp_handle_presence_change(p_slot);

        /* Check Power Fault Detected */
        if (intr_loc & PWR_FAULT_DETECTED)
                pciehp_handle_power_fault(p_slot);

        return IRQ_HANDLED;
}

static int hpc_get_max_lnk_speed(struct slot *slot, enum pci_bus_speed *value)
{
        struct controller *ctrl = slot->ctrl;
        enum pcie_link_speed lnk_speed;
        u32     lnk_cap;
        int retval = 0;

        retval = pciehp_readl(ctrl, LNKCAP, &lnk_cap);
        if (retval) {
                err("%s: Cannot read LNKCAP register\n", __func__);
                return retval;
        }

        switch (lnk_cap & 0x000F) {
        case 1:
                lnk_speed = PCIE_2PT5GB;
                break;
        default:
                lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
                break;
        }

        *value = lnk_speed;
        dbg("Max link speed = %d\n", lnk_speed);

        return retval;
}

static int hpc_get_max_lnk_width(struct slot *slot,
                                 enum pcie_link_width *value)
{
        struct controller *ctrl = slot->ctrl;
        enum pcie_link_width lnk_wdth;
        u32     lnk_cap;
        int retval = 0;

        retval = pciehp_readl(ctrl, LNKCAP, &lnk_cap);
        if (retval) {
                err("%s: Cannot read LNKCAP register\n", __func__);
                return retval;
        }

        switch ((lnk_cap & 0x03F0) >> 4){
        case 0:
                lnk_wdth = PCIE_LNK_WIDTH_RESRV;
                break;
        case 1:
                lnk_wdth = PCIE_LNK_X1;
                break;
        case 2:
                lnk_wdth = PCIE_LNK_X2;
                break;
        case 4:
                lnk_wdth = PCIE_LNK_X4;
                break;
        case 8:
                lnk_wdth = PCIE_LNK_X8;
                break;
        case 12:
                lnk_wdth = PCIE_LNK_X12;
                break;
        case 16:
                lnk_wdth = PCIE_LNK_X16;
                break;
        case 32:
                lnk_wdth = PCIE_LNK_X32;
                break;
        default:
                lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN;
                break;
        }

        *value = lnk_wdth;
        dbg("Max link width = %d\n", lnk_wdth);

        return retval;
}

static int hpc_get_cur_lnk_speed(struct slot *slot, enum pci_bus_speed *value)
{
        struct controller *ctrl = slot->ctrl;
        enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
        int retval = 0;
        u16 lnk_status;

        retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status);
        if (retval) {
                err("%s: Cannot read LNKSTATUS register\n", __func__);
                return retval;
        }

        switch (lnk_status & 0x0F) {
        case 1:
                lnk_speed = PCIE_2PT5GB;
                break;
        default:
                lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
                break;
        }

        *value = lnk_speed;
        dbg("Current link speed = %d\n", lnk_speed);

        return retval;
}

static int hpc_get_cur_lnk_width(struct slot *slot,
                                 enum pcie_link_width *value)
{
        struct controller *ctrl = slot->ctrl;
        enum pcie_link_width lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN;
        int retval = 0;
        u16 lnk_status;

        retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status);
        if (retval) {
                err("%s: Cannot read LNKSTATUS register\n", __func__);
                return retval;
        }

        switch ((lnk_status & 0x03F0) >> 4){
        case 0:
                lnk_wdth = PCIE_LNK_WIDTH_RESRV;
                break;
        case 1:
                lnk_wdth = PCIE_LNK_X1;
                break;
        case 2:
                lnk_wdth = PCIE_LNK_X2;
                break;
        case 4:
                lnk_wdth = PCIE_LNK_X4;
                break;
        case 8:
                lnk_wdth = PCIE_LNK_X8;
                break;
        case 12:
                lnk_wdth = PCIE_LNK_X12;
                break;
        case 16:
                lnk_wdth = PCIE_LNK_X16;
                break;
        case 32:
                lnk_wdth = PCIE_LNK_X32;
                break;
        default:
                lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN;
                break;
        }

        *value = lnk_wdth;
        dbg("Current link width = %d\n", lnk_wdth);

        return retval;
}

static struct hpc_ops pciehp_hpc_ops = {
        .power_on_slot                  = hpc_power_on_slot,
        .power_off_slot                 = hpc_power_off_slot,
        .set_attention_status           = hpc_set_attention_status,
        .get_power_status               = hpc_get_power_status,
        .get_attention_status           = hpc_get_attention_status,
        .get_latch_status               = hpc_get_latch_status,
        .get_adapter_status             = hpc_get_adapter_status,
        .get_emi_status                 = hpc_get_emi_status,
        .toggle_emi                     = hpc_toggle_emi,

        .get_max_bus_speed              = hpc_get_max_lnk_speed,
        .get_cur_bus_speed              = hpc_get_cur_lnk_speed,
        .get_max_lnk_width              = hpc_get_max_lnk_width,
        .get_cur_lnk_width              = hpc_get_cur_lnk_width,

        .query_power_fault              = hpc_query_power_fault,
        .green_led_on                   = hpc_set_green_led_on,
        .green_led_off                  = hpc_set_green_led_off,
        .green_led_blink                = hpc_set_green_led_blink,

        .release_ctlr                   = hpc_release_ctlr,
        .check_lnk_status               = hpc_check_lnk_status,
};

#ifdef CONFIG_ACPI
int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
{
        acpi_status status;
        acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
        struct pci_dev *pdev = dev;
        struct pci_bus *parent;
        struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };

        /*
         * Per PCI firmware specification, we should run the ACPI _OSC
         * method to get control of hotplug hardware before using it.
         * If an _OSC is missing, we look for an OSHP to do the same thing.
         * To handle different BIOS behavior, we look for _OSC and OSHP
         * within the scope of the hotplug controller and its parents, upto
         * the host bridge under which this controller exists.
         */
        while (!handle) {
                /*
                 * This hotplug controller was not listed in the ACPI name
                 * space at all. Try to get acpi handle of parent pci bus.
                 */
                if (!pdev || !pdev->bus->parent)
                        break;
                parent = pdev->bus->parent;
                dbg("Could not find %s in acpi namespace, trying parent\n",
                                pci_name(pdev));
                if (!parent->self)
                        /* Parent must be a host bridge */
                        handle = acpi_get_pci_rootbridge_handle(
                                        pci_domain_nr(parent),
                                        parent->number);
                else
                        handle = DEVICE_ACPI_HANDLE(
                                        &(parent->self->dev));
                pdev = parent->self;
        }

        while (handle) {
                acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
                dbg("Trying to get hotplug control for %s \n",
                        (char *)string.pointer);
                status = pci_osc_control_set(handle,
                                OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL |
                                OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
                if (status == AE_NOT_FOUND)
                        status = acpi_run_oshp(handle);
                if (ACPI_SUCCESS(status)) {
                        dbg("Gained control for hotplug HW for pci %s (%s)\n",
                                pci_name(dev), (char *)string.pointer);
                        kfree(string.pointer);
                        return 0;
                }
                if (acpi_root_bridge(handle))
                        break;
                chandle = handle;
                status = acpi_get_parent(chandle, &handle);
                if (ACPI_FAILURE(status))
                        break;
        }

        dbg("Cannot get control of hotplug hardware for pci %s\n",
                        pci_name(dev));

        kfree(string.pointer);
        return -1;
}
#endif

static int pcie_init_hardware_part1(struct controller *ctrl,
                                    struct pcie_device *dev)
{
        /* Clear all remaining event bits in Slot Status register */
        if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
                err("%s: Cannot write to SLOTSTATUS register\n", __func__);
                return -1;
        }

        /* Mask Hot-plug Interrupt Enable */
        if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
                err("%s: Cannot mask hotplug interrupt enable\n", __func__);
                return -1;
        }
        return 0;
}

int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev)
{
        u16 cmd, mask;

        cmd = PRSN_DETECT_ENABLE;
        if (ATTN_BUTTN(ctrl))
                cmd |= ATTN_BUTTN_ENABLE;
        if (POWER_CTRL(ctrl))
                cmd |= PWR_FAULT_DETECT_ENABLE;
        if (MRL_SENS(ctrl))
                cmd |= MRL_DETECT_ENABLE;
        if (!pciehp_poll_mode)
                cmd |= HP_INTR_ENABLE;

        mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE |
                PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | HP_INTR_ENABLE;

        if (pcie_write_cmd(ctrl, cmd, mask)) {
                err("%s: Cannot enable software notification\n", __func__);
                return -1;
        }

        return 0;
}

static inline void dbg_ctrl(struct controller *ctrl)
{
        int i;
        u16 reg16;
        struct pci_dev *pdev = ctrl->pci_dev;

        if (!pciehp_debug)
                return;

        dbg("Hotplug Controller:\n");
        dbg("  Seg/Bus/Dev/Func/IRQ : %s IRQ %d\n", pci_name(pdev), pdev->irq);
        dbg("  Vendor ID            : 0x%04x\n", pdev->vendor);
        dbg("  Device ID            : 0x%04x\n", pdev->device);
        dbg("  Subsystem ID         : 0x%04x\n", pdev->subsystem_device);
        dbg("  Subsystem Vendor ID  : 0x%04x\n", pdev->subsystem_vendor);
        dbg("  PCIe Cap offset      : 0x%02x\n", ctrl->cap_base);
        for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
                if (!pci_resource_len(pdev, i))
                        continue;
                dbg("  PCI resource [%d]     : 0x%llx@0x%llx\n", i,
                    (unsigned long long)pci_resource_len(pdev, i),
                    (unsigned long long)pci_resource_start(pdev, i));
        }
        dbg("Slot Capabilities      : 0x%08x\n", ctrl->slot_cap);
        dbg("  Physical Slot Number : %d\n", ctrl->first_slot);
        dbg("  Attention Button     : %3s\n", ATTN_BUTTN(ctrl) ? "yes" : "no");
        dbg("  Power Controller     : %3s\n", POWER_CTRL(ctrl) ? "yes" : "no");
        dbg("  MRL Sensor           : %3s\n", MRL_SENS(ctrl)   ? "yes" : "no");
        dbg("  Attention Indicator  : %3s\n", ATTN_LED(ctrl)   ? "yes" : "no");
        dbg("  Power Indicator      : %3s\n", PWR_LED(ctrl)    ? "yes" : "no");
        dbg("  Hot-Plug Surprise    : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
        dbg("  EMI Present          : %3s\n", EMI(ctrl)        ? "yes" : "no");
        dbg("  Comamnd Completed    : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
        pciehp_readw(ctrl, SLOTSTATUS, &reg16);
        dbg("Slot Status            : 0x%04x\n", reg16);
        pciehp_readw(ctrl, SLOTSTATUS, &reg16);
        dbg("Slot Control           : 0x%04x\n", reg16);
}

int pcie_init(struct controller *ctrl, struct pcie_device *dev)
{
        u32 slot_cap;
        struct pci_dev *pdev = dev->port;

        ctrl->pci_dev = pdev;
        ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
        if (!ctrl->cap_base) {
                err("%s: Cannot find PCI Express capability\n", __func__);
                goto abort;
        }
        if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) {
                err("%s: Cannot read SLOTCAP register\n", __func__);
                goto abort;
        }

        ctrl->slot_cap = slot_cap;
        ctrl->first_slot = slot_cap >> 19;
        ctrl->slot_device_offset = 0;
        ctrl->num_slots = 1;
        ctrl->hpc_ops = &pciehp_hpc_ops;
        mutex_init(&ctrl->crit_sect);
        mutex_init(&ctrl->ctrl_lock);
        init_waitqueue_head(&ctrl->queue);
        dbg_ctrl(ctrl);
        /*
         * Controller doesn't notify of command completion if the "No
         * Command Completed Support" bit is set in Slot Capability
         * register or the controller supports none of power
         * controller, attention led, power led and EMI.
         */
        if (NO_CMD_CMPL(ctrl) ||
            !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
            ctrl->no_cmd_complete = 1;

        info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
             pdev->vendor, pdev->device,
             pdev->subsystem_vendor, pdev->subsystem_device);

        if (pcie_init_hardware_part1(ctrl, dev))
                goto abort;

        if (pciehp_request_irq(ctrl))
                goto abort;

        /*
         * If this is the first controller to be initialized,
         * initialize the pciehp work queue
         */
        if (atomic_add_return(1, &pciehp_num_controllers) == 1) {
                pciehp_wq = create_singlethread_workqueue("pciehpd");
                if (!pciehp_wq) {
                        goto abort_free_irq;
                }
        }

        if (pcie_init_hardware_part2(ctrl, dev))
                goto abort_free_irq;

        return 0;

abort_free_irq:
        pciehp_free_irq(ctrl);
abort:
        return -1;
}