Clean up mostly unused IOSPACE macros
[linux-2.6/mini2440.git] / include / asm-sparc64 / floppy.h
blob4aa0925e1b1b6b784bf83850deb28a0be5b5e449
1 /* $Id: floppy.h,v 1.32 2001/10/26 17:59:36 davem Exp $
2 * asm-sparc64/floppy.h: Sparc specific parts of the Floppy driver.
4 * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
5 * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
7 * Ultra/PCI support added: Sep 1997 Eddie C. Dost (ecd@skynet.be)
8 */
10 #ifndef __ASM_SPARC64_FLOPPY_H
11 #define __ASM_SPARC64_FLOPPY_H
13 #include <linux/init.h>
15 #include <asm/page.h>
16 #include <asm/pgtable.h>
17 #include <asm/system.h>
18 #include <asm/idprom.h>
19 #include <asm/oplib.h>
20 #include <asm/auxio.h>
21 #include <asm/sbus.h>
22 #include <asm/irq.h>
26 * Define this to enable exchanging drive 0 and 1 if only drive 1 is
27 * probed on PCI machines.
29 #undef PCI_FDC_SWAP_DRIVES
32 /* References:
33 * 1) Netbsd Sun floppy driver.
34 * 2) NCR 82077 controller manual
35 * 3) Intel 82077 controller manual
37 struct sun_flpy_controller {
38 volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */
39 volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */
40 volatile unsigned char dor_82077; /* Digital Output reg. */
41 volatile unsigned char tapectl_82077; /* Tape Control reg */
42 volatile unsigned char status_82077; /* Main Status Register. */
43 #define drs_82077 status_82077 /* Digital Rate Select reg. */
44 volatile unsigned char data_82077; /* Data fifo. */
45 volatile unsigned char ___unused;
46 volatile unsigned char dir_82077; /* Digital Input reg. */
47 #define dcr_82077 dir_82077 /* Config Control reg. */
50 /* You'll only ever find one controller on an Ultra anyways. */
51 static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
52 unsigned long fdc_status;
53 static struct sbus_dev *floppy_sdev = NULL;
55 struct sun_floppy_ops {
56 unsigned char (*fd_inb) (unsigned long port);
57 void (*fd_outb) (unsigned char value, unsigned long port);
58 void (*fd_enable_dma) (void);
59 void (*fd_disable_dma) (void);
60 void (*fd_set_dma_mode) (int);
61 void (*fd_set_dma_addr) (char *);
62 void (*fd_set_dma_count) (int);
63 unsigned int (*get_dma_residue) (void);
64 int (*fd_request_irq) (void);
65 void (*fd_free_irq) (void);
66 int (*fd_eject) (int);
69 static struct sun_floppy_ops sun_fdops;
71 #define fd_inb(port) sun_fdops.fd_inb(port)
72 #define fd_outb(value,port) sun_fdops.fd_outb(value,port)
73 #define fd_enable_dma() sun_fdops.fd_enable_dma()
74 #define fd_disable_dma() sun_fdops.fd_disable_dma()
75 #define fd_request_dma() (0) /* nothing... */
76 #define fd_free_dma() /* nothing... */
77 #define fd_clear_dma_ff() /* nothing... */
78 #define fd_set_dma_mode(mode) sun_fdops.fd_set_dma_mode(mode)
79 #define fd_set_dma_addr(addr) sun_fdops.fd_set_dma_addr(addr)
80 #define fd_set_dma_count(count) sun_fdops.fd_set_dma_count(count)
81 #define get_dma_residue(x) sun_fdops.get_dma_residue()
82 #define fd_cacheflush(addr, size) /* nothing... */
83 #define fd_request_irq() sun_fdops.fd_request_irq()
84 #define fd_free_irq() sun_fdops.fd_free_irq()
85 #define fd_eject(drive) sun_fdops.fd_eject(drive)
87 static int FLOPPY_MOTOR_MASK = 0x10;
89 /* Super paranoid... */
90 #undef HAVE_DISABLE_HLT
92 static int sun_floppy_types[2] = { 0, 0 };
94 /* Here is where we catch the floppy driver trying to initialize,
95 * therefore this is where we call the PROM device tree probing
96 * routine etc. on the Sparc.
98 #define FLOPPY0_TYPE sun_floppy_init()
99 #define FLOPPY1_TYPE sun_floppy_types[1]
101 #define FDC1 ((unsigned long)sun_fdc)
103 #define N_FDC 1
104 #define N_DRIVE 8
106 /* No 64k boundary crossing problems on the Sparc. */
107 #define CROSS_64KB(a,s) (0)
109 static unsigned char sun_82077_fd_inb(unsigned long port)
111 udelay(5);
112 switch(port & 7) {
113 default:
114 printk("floppy: Asked to read unknown port %lx\n", port);
115 panic("floppy: Port bolixed.");
116 case 4: /* FD_STATUS */
117 return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA;
118 case 5: /* FD_DATA */
119 return sbus_readb(&sun_fdc->data_82077);
120 case 7: /* FD_DIR */
121 /* XXX: Is DCL on 0x80 in sun4m? */
122 return sbus_readb(&sun_fdc->dir_82077);
124 panic("sun_82072_fd_inb: How did I get here?");
127 static void sun_82077_fd_outb(unsigned char value, unsigned long port)
129 udelay(5);
130 switch(port & 7) {
131 default:
132 printk("floppy: Asked to write to unknown port %lx\n", port);
133 panic("floppy: Port bolixed.");
134 case 2: /* FD_DOR */
135 /* Happily, the 82077 has a real DOR register. */
136 sbus_writeb(value, &sun_fdc->dor_82077);
137 break;
138 case 5: /* FD_DATA */
139 sbus_writeb(value, &sun_fdc->data_82077);
140 break;
141 case 7: /* FD_DCR */
142 sbus_writeb(value, &sun_fdc->dcr_82077);
143 break;
144 case 4: /* FD_STATUS */
145 sbus_writeb(value, &sun_fdc->status_82077);
146 break;
148 return;
151 /* For pseudo-dma (Sun floppy drives have no real DMA available to
152 * them so we must eat the data fifo bytes directly ourselves) we have
153 * three state variables. doing_pdma tells our inline low-level
154 * assembly floppy interrupt entry point whether it should sit and eat
155 * bytes from the fifo or just transfer control up to the higher level
156 * floppy interrupt c-code. I tried very hard but I could not get the
157 * pseudo-dma to work in c-code without getting many overruns and
158 * underruns. If non-zero, doing_pdma encodes the direction of
159 * the transfer for debugging. 1=read 2=write
161 unsigned char *pdma_vaddr;
162 unsigned long pdma_size;
163 volatile int doing_pdma = 0;
165 /* This is software state */
166 char *pdma_base = NULL;
167 unsigned long pdma_areasize;
169 /* Common routines to all controller types on the Sparc. */
170 static void sun_fd_disable_dma(void)
172 doing_pdma = 0;
173 if (pdma_base) {
174 mmu_unlockarea(pdma_base, pdma_areasize);
175 pdma_base = NULL;
179 static void sun_fd_set_dma_mode(int mode)
181 switch(mode) {
182 case DMA_MODE_READ:
183 doing_pdma = 1;
184 break;
185 case DMA_MODE_WRITE:
186 doing_pdma = 2;
187 break;
188 default:
189 printk("Unknown dma mode %d\n", mode);
190 panic("floppy: Giving up...");
194 static void sun_fd_set_dma_addr(char *buffer)
196 pdma_vaddr = buffer;
199 static void sun_fd_set_dma_count(int length)
201 pdma_size = length;
204 static void sun_fd_enable_dma(void)
206 pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
207 pdma_base = pdma_vaddr;
208 pdma_areasize = pdma_size;
211 irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie)
213 if (likely(doing_pdma)) {
214 void __iomem *stat = (void __iomem *) fdc_status;
215 unsigned char *vaddr = pdma_vaddr;
216 unsigned long size = pdma_size;
217 u8 val;
219 while (size) {
220 val = readb(stat);
221 if (unlikely(!(val & 0x80))) {
222 pdma_vaddr = vaddr;
223 pdma_size = size;
224 return IRQ_HANDLED;
226 if (unlikely(!(val & 0x20))) {
227 pdma_vaddr = vaddr;
228 pdma_size = size;
229 doing_pdma = 0;
230 goto main_interrupt;
232 if (val & 0x40) {
233 /* read */
234 *vaddr++ = readb(stat + 1);
235 } else {
236 unsigned char data = *vaddr++;
238 /* write */
239 writeb(data, stat + 1);
241 size--;
244 pdma_vaddr = vaddr;
245 pdma_size = size;
247 /* Send Terminal Count pulse to floppy controller. */
248 val = readb(auxio_register);
249 val |= AUXIO_AUX1_FTCNT;
250 writeb(val, auxio_register);
251 val &= ~AUXIO_AUX1_FTCNT;
252 writeb(val, auxio_register);
254 doing_pdma = 0;
257 main_interrupt:
258 return floppy_interrupt(irq, dev_cookie);
261 static int sun_fd_request_irq(void)
263 static int once = 0;
264 int error;
266 if(!once) {
267 once = 1;
269 error = request_irq(FLOPPY_IRQ, sparc_floppy_irq,
270 IRQF_DISABLED, "floppy", NULL);
272 return ((error == 0) ? 0 : -1);
274 return 0;
277 static void sun_fd_free_irq(void)
281 static unsigned int sun_get_dma_residue(void)
283 /* XXX This isn't really correct. XXX */
284 return 0;
287 static int sun_fd_eject(int drive)
289 set_dor(0x00, 0xff, 0x90);
290 udelay(500);
291 set_dor(0x00, 0x6f, 0x00);
292 udelay(500);
293 return 0;
296 #ifdef CONFIG_PCI
297 #include <asm/ebus.h>
298 #include <asm/isa.h>
299 #include <asm/ns87303.h>
301 static struct ebus_dma_info sun_pci_fd_ebus_dma;
302 static struct pci_dev *sun_pci_ebus_dev;
303 static int sun_pci_broken_drive = -1;
305 struct sun_pci_dma_op {
306 unsigned int addr;
307 int len;
308 int direction;
309 char *buf;
311 static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL};
312 static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL};
314 extern irqreturn_t floppy_interrupt(int irq, void *dev_id);
316 static unsigned char sun_pci_fd_inb(unsigned long port)
318 udelay(5);
319 return inb(port);
322 static void sun_pci_fd_outb(unsigned char val, unsigned long port)
324 udelay(5);
325 outb(val, port);
328 static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port)
330 udelay(5);
332 * XXX: Due to SUN's broken floppy connector on AX and AXi
333 * we need to turn on MOTOR_0 also, if the floppy is
334 * jumpered to DS1 (like most PC floppies are). I hope
335 * this does not hurt correct hardware like the AXmp.
336 * (Eddie, Sep 12 1998).
338 if (port == ((unsigned long)sun_fdc) + 2) {
339 if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) {
340 val |= 0x10;
343 outb(val, port);
346 #ifdef PCI_FDC_SWAP_DRIVES
347 static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port)
349 udelay(5);
351 * XXX: Due to SUN's broken floppy connector on AX and AXi
352 * we need to turn on MOTOR_0 also, if the floppy is
353 * jumpered to DS1 (like most PC floppies are). I hope
354 * this does not hurt correct hardware like the AXmp.
355 * (Eddie, Sep 12 1998).
357 if (port == ((unsigned long)sun_fdc) + 2) {
358 if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) {
359 val &= ~(0x03);
360 val |= 0x21;
363 outb(val, port);
365 #endif /* PCI_FDC_SWAP_DRIVES */
367 static void sun_pci_fd_enable_dma(void)
369 BUG_ON((NULL == sun_pci_dma_pending.buf) ||
370 (0 == sun_pci_dma_pending.len) ||
371 (0 == sun_pci_dma_pending.direction));
373 sun_pci_dma_current.buf = sun_pci_dma_pending.buf;
374 sun_pci_dma_current.len = sun_pci_dma_pending.len;
375 sun_pci_dma_current.direction = sun_pci_dma_pending.direction;
377 sun_pci_dma_pending.buf = NULL;
378 sun_pci_dma_pending.len = 0;
379 sun_pci_dma_pending.direction = 0;
380 sun_pci_dma_pending.addr = -1U;
382 sun_pci_dma_current.addr =
383 pci_map_single(sun_pci_ebus_dev,
384 sun_pci_dma_current.buf,
385 sun_pci_dma_current.len,
386 sun_pci_dma_current.direction);
388 ebus_dma_enable(&sun_pci_fd_ebus_dma, 1);
390 if (ebus_dma_request(&sun_pci_fd_ebus_dma,
391 sun_pci_dma_current.addr,
392 sun_pci_dma_current.len))
393 BUG();
396 static void sun_pci_fd_disable_dma(void)
398 ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
399 if (sun_pci_dma_current.addr != -1U)
400 pci_unmap_single(sun_pci_ebus_dev,
401 sun_pci_dma_current.addr,
402 sun_pci_dma_current.len,
403 sun_pci_dma_current.direction);
404 sun_pci_dma_current.addr = -1U;
407 static void sun_pci_fd_set_dma_mode(int mode)
409 if (mode == DMA_MODE_WRITE)
410 sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
411 else
412 sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
414 ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
417 static void sun_pci_fd_set_dma_count(int length)
419 sun_pci_dma_pending.len = length;
422 static void sun_pci_fd_set_dma_addr(char *buffer)
424 sun_pci_dma_pending.buf = buffer;
427 static unsigned int sun_pci_get_dma_residue(void)
429 return ebus_dma_residue(&sun_pci_fd_ebus_dma);
432 static int sun_pci_fd_request_irq(void)
434 return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1);
437 static void sun_pci_fd_free_irq(void)
439 ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0);
442 static int sun_pci_fd_eject(int drive)
444 return -EINVAL;
447 void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie)
449 floppy_interrupt(0, NULL);
453 * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI,
454 * even if this is configured using DS1, thus looks like /dev/fd1 with
455 * the cabling used in Ultras.
457 #define DOR (port + 2)
458 #define MSR (port + 4)
459 #define FIFO (port + 5)
461 static void sun_pci_fd_out_byte(unsigned long port, unsigned char val,
462 unsigned long reg)
464 unsigned char status;
465 int timeout = 1000;
467 while (!((status = inb(MSR)) & 0x80) && --timeout)
468 udelay(100);
469 outb(val, reg);
472 static unsigned char sun_pci_fd_sensei(unsigned long port)
474 unsigned char result[2] = { 0x70, 0x00 };
475 unsigned char status;
476 int i = 0;
478 sun_pci_fd_out_byte(port, 0x08, FIFO);
479 do {
480 int timeout = 1000;
482 while (!((status = inb(MSR)) & 0x80) && --timeout)
483 udelay(100);
485 if (!timeout)
486 break;
488 if ((status & 0xf0) == 0xd0)
489 result[i++] = inb(FIFO);
490 else
491 break;
492 } while (i < 2);
494 return result[0];
497 static void sun_pci_fd_reset(unsigned long port)
499 unsigned char mask = 0x00;
500 unsigned char status;
501 int timeout = 10000;
503 outb(0x80, MSR);
504 do {
505 status = sun_pci_fd_sensei(port);
506 if ((status & 0xc0) == 0xc0)
507 mask |= 1 << (status & 0x03);
508 else
509 udelay(100);
510 } while ((mask != 0x0f) && --timeout);
513 static int sun_pci_fd_test_drive(unsigned long port, int drive)
515 unsigned char status, data;
516 int timeout = 1000;
517 int ready;
519 sun_pci_fd_reset(port);
521 data = (0x10 << drive) | 0x0c | drive;
522 sun_pci_fd_out_byte(port, data, DOR);
524 sun_pci_fd_out_byte(port, 0x07, FIFO);
525 sun_pci_fd_out_byte(port, drive & 0x03, FIFO);
527 do {
528 udelay(100);
529 status = sun_pci_fd_sensei(port);
530 } while (((status & 0xc0) == 0x80) && --timeout);
532 if (!timeout)
533 ready = 0;
534 else
535 ready = (status & 0x10) ? 0 : 1;
537 sun_pci_fd_reset(port);
538 return ready;
540 #undef FIFO
541 #undef MSR
542 #undef DOR
544 #endif /* CONFIG_PCI */
546 #ifdef CONFIG_PCI
547 static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
549 if (!strcmp(edev->prom_node->name, "fdthree"))
550 return 1;
551 if (!strcmp(edev->prom_node->name, "floppy")) {
552 const char *compat;
554 compat = of_get_property(edev->prom_node,
555 "compatible", NULL);
556 if (compat && !strcmp(compat, "fdthree"))
557 return 1;
559 return 0;
561 #endif
563 #ifdef CONFIG_PCI
564 #undef ISA_FLOPPY_WORKS
566 #ifdef ISA_FLOPPY_WORKS
567 static unsigned long __init isa_floppy_init(void)
569 struct sparc_isa_bridge *isa_br;
570 struct sparc_isa_device *isa_dev = NULL;
572 for_each_isa(isa_br) {
573 for_each_isadev(isa_dev, isa_br) {
574 if (!strcmp(isa_dev->prom_node->name, "dma")) {
575 struct sparc_isa_device *child =
576 isa_dev->child;
578 while (child) {
579 if (!strcmp(child->prom_node->name,
580 "floppy")) {
581 isa_dev = child;
582 goto isa_done;
584 child = child->next;
589 isa_done:
590 if (!isa_dev)
591 return 0;
593 /* We could use DMA on devices behind the ISA bridge, but...
595 * There is a slight problem. Normally on x86 kit the x86 processor
596 * delays I/O port instructions when the ISA bus "dma in progress"
597 * signal is active. Well, sparc64 systems do not monitor this
598 * signal thus we would need to block all I/O port accesses in software
599 * when a dma transfer is active for some device.
602 sun_fdc = (struct sun_flpy_controller *)isa_dev->resource.start;
603 FLOPPY_IRQ = isa_dev->irq;
605 sun_fdops.fd_inb = sun_pci_fd_inb;
606 sun_fdops.fd_outb = sun_pci_fd_outb;
608 can_use_virtual_dma = use_virtual_dma = 1;
609 sun_fdops.fd_enable_dma = sun_fd_enable_dma;
610 sun_fdops.fd_disable_dma = sun_fd_disable_dma;
611 sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
612 sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
613 sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
614 sun_fdops.get_dma_residue = sun_get_dma_residue;
616 sun_fdops.fd_request_irq = sun_fd_request_irq;
617 sun_fdops.fd_free_irq = sun_fd_free_irq;
619 /* Floppy eject is manual. Actually, could determine this
620 * via presence of 'manual' property in OBP node.
622 sun_fdops.fd_eject = sun_pci_fd_eject;
624 fdc_status = (unsigned long) &sun_fdc->status_82077;
625 FLOPPY_MOTOR_MASK = 0xf0;
627 allowed_drive_mask = 0;
628 sun_floppy_types[0] = 0;
629 sun_floppy_types[1] = 4;
631 sun_pci_broken_drive = 1;
632 sun_fdops.fd_outb = sun_pci_fd_broken_outb;
634 return sun_floppy_types[0];
636 #endif /* ISA_FLOPPY_WORKS */
638 #endif
640 static unsigned long __init sun_floppy_init(void)
642 char state[128];
643 struct sbus_bus *bus;
644 struct sbus_dev *sdev = NULL;
645 static int initialized = 0;
647 if (initialized)
648 return sun_floppy_types[0];
649 initialized = 1;
651 for_all_sbusdev (sdev, bus) {
652 if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))
653 break;
655 if(sdev) {
656 floppy_sdev = sdev;
657 FLOPPY_IRQ = sdev->irqs[0];
658 } else {
659 #ifdef CONFIG_PCI
660 struct linux_ebus *ebus;
661 struct linux_ebus_device *edev = NULL;
662 unsigned long config = 0;
663 void __iomem *auxio_reg;
664 const char *state_prop;
666 for_each_ebus(ebus) {
667 for_each_ebusdev(edev, ebus) {
668 if (ebus_fdthree_p(edev))
669 goto ebus_done;
672 ebus_done:
673 if (!edev) {
674 #ifdef ISA_FLOPPY_WORKS
675 return isa_floppy_init();
676 #else
677 return 0;
678 #endif
681 state_prop = of_get_property(edev->prom_node, "status", NULL);
682 if (state_prop && !strncmp(state_prop, "disabled", 8))
683 return 0;
685 FLOPPY_IRQ = edev->irqs[0];
687 /* Make sure the high density bit is set, some systems
688 * (most notably Ultra5/Ultra10) come up with it clear.
690 auxio_reg = (void __iomem *) edev->resource[2].start;
691 writel(readl(auxio_reg)|0x2, auxio_reg);
693 sun_pci_ebus_dev = ebus->self;
695 spin_lock_init(&sun_pci_fd_ebus_dma.lock);
697 /* XXX ioremap */
698 sun_pci_fd_ebus_dma.regs = (void __iomem *)
699 edev->resource[1].start;
700 if (!sun_pci_fd_ebus_dma.regs)
701 return 0;
703 sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
704 EBUS_DMA_FLAG_TCI_DISABLE);
705 sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback;
706 sun_pci_fd_ebus_dma.client_cookie = NULL;
707 sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ;
708 strcpy(sun_pci_fd_ebus_dma.name, "floppy");
709 if (ebus_dma_register(&sun_pci_fd_ebus_dma))
710 return 0;
712 /* XXX ioremap */
713 sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
715 sun_fdops.fd_inb = sun_pci_fd_inb;
716 sun_fdops.fd_outb = sun_pci_fd_outb;
718 can_use_virtual_dma = use_virtual_dma = 0;
719 sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma;
720 sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma;
721 sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode;
722 sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr;
723 sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count;
724 sun_fdops.get_dma_residue = sun_pci_get_dma_residue;
726 sun_fdops.fd_request_irq = sun_pci_fd_request_irq;
727 sun_fdops.fd_free_irq = sun_pci_fd_free_irq;
729 sun_fdops.fd_eject = sun_pci_fd_eject;
731 fdc_status = (unsigned long) &sun_fdc->status_82077;
732 FLOPPY_MOTOR_MASK = 0xf0;
735 * XXX: Find out on which machines this is really needed.
737 if (1) {
738 sun_pci_broken_drive = 1;
739 sun_fdops.fd_outb = sun_pci_fd_broken_outb;
742 allowed_drive_mask = 0;
743 if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0))
744 sun_floppy_types[0] = 4;
745 if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1))
746 sun_floppy_types[1] = 4;
749 * Find NS87303 SuperIO config registers (through ecpp).
751 for_each_ebus(ebus) {
752 for_each_ebusdev(edev, ebus) {
753 if (!strcmp(edev->prom_node->name, "ecpp")) {
754 config = edev->resource[1].start;
755 goto config_done;
759 config_done:
762 * Sanity check, is this really the NS87303?
764 switch (config & 0x3ff) {
765 case 0x02e:
766 case 0x15c:
767 case 0x26e:
768 case 0x398:
769 break;
770 default:
771 config = 0;
774 if (!config)
775 return sun_floppy_types[0];
777 /* Enable PC-AT mode. */
778 ns87303_modify(config, ASC, 0, 0xc0);
780 #ifdef PCI_FDC_SWAP_DRIVES
782 * If only Floppy 1 is present, swap drives.
784 if (!sun_floppy_types[0] && sun_floppy_types[1]) {
786 * Set the drive exchange bit in FCR on NS87303,
787 * make sure other bits are sane before doing so.
789 ns87303_modify(config, FER, FER_EDM, 0);
790 ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
791 ns87303_modify(config, FCR, 0, FCR_LDE);
793 config = sun_floppy_types[0];
794 sun_floppy_types[0] = sun_floppy_types[1];
795 sun_floppy_types[1] = config;
797 if (sun_pci_broken_drive != -1) {
798 sun_pci_broken_drive = 1 - sun_pci_broken_drive;
799 sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb;
802 #endif /* PCI_FDC_SWAP_DRIVES */
804 return sun_floppy_types[0];
805 #else
806 return 0;
807 #endif
809 prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
810 if(!strncmp(state, "disabled", 8))
811 return 0;
814 * We cannot do sbus_ioremap here: it does request_region,
815 * which the generic floppy driver tries to do once again.
816 * But we must use the sdev resource values as they have
817 * had parent ranges applied.
819 sun_fdc = (struct sun_flpy_controller *)
820 (sdev->resource[0].start +
821 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
823 /* Last minute sanity check... */
824 if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
825 sun_fdc = (struct sun_flpy_controller *)-1;
826 return 0;
829 sun_fdops.fd_inb = sun_82077_fd_inb;
830 sun_fdops.fd_outb = sun_82077_fd_outb;
832 can_use_virtual_dma = use_virtual_dma = 1;
833 sun_fdops.fd_enable_dma = sun_fd_enable_dma;
834 sun_fdops.fd_disable_dma = sun_fd_disable_dma;
835 sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
836 sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
837 sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
838 sun_fdops.get_dma_residue = sun_get_dma_residue;
840 sun_fdops.fd_request_irq = sun_fd_request_irq;
841 sun_fdops.fd_free_irq = sun_fd_free_irq;
843 sun_fdops.fd_eject = sun_fd_eject;
845 fdc_status = (unsigned long) &sun_fdc->status_82077;
847 /* Success... */
848 allowed_drive_mask = 0x01;
849 sun_floppy_types[0] = 4;
850 sun_floppy_types[1] = 0;
852 return sun_floppy_types[0];
855 #define EXTRA_FLOPPY_PARAMS
857 static DEFINE_SPINLOCK(dma_spin_lock);
859 #define claim_dma_lock() \
860 ({ unsigned long flags; \
861 spin_lock_irqsave(&dma_spin_lock, flags); \
862 flags; \
865 #define release_dma_lock(__flags) \
866 spin_unlock_irqrestore(&dma_spin_lock, __flags);
868 #endif /* !(__ASM_SPARC64_FLOPPY_H) */