2 * Acquire Single Board Computer Watchdog Timer driver
4 * Based on wdt.c. Original copyright messages:
6 * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
7 * http://www.redhat.com
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version
12 * 2 of the License, or (at your option) any later version.
14 * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
15 * warranty for any of this software. This material is provided
16 * "AS-IS" and at no charge.
18 * (c) Copyright 1995 Alan Cox <alan@redhat.com>
20 * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
21 * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
22 * Can't add timeout - driver doesn't allow changing value
26 * Theory of Operation:
27 * The Watch-Dog Timer is provided to ensure that standalone
28 * Systems can always recover from catastrophic conditions that
29 * caused the CPU to crash. This condition may have occured by
30 * external EMI or a software bug. When the CPU stops working
31 * correctly, hardware on the board will either perform a hardware
32 * reset (cold boot) or a non-maskable interrupt (NMI) to bring the
33 * system back to a known state.
35 * The Watch-Dog Timer is controlled by two I/O Ports.
36 * 443 hex - Read - Enable or refresh the Watch-Dog Timer
37 * 043 hex - Read - Disable the Watch-Dog Timer
39 * To enable the Watch-Dog Timer, a read from I/O port 443h must
40 * be performed. This will enable and activate the countdown timer
41 * which will eventually time out and either reset the CPU or cause
42 * an NMI depending on the setting of a jumper. To ensure that this
43 * reset condition does not occur, the Watch-Dog Timer must be
44 * periodically refreshed by reading the same I/O port 443h.
45 * The Watch-Dog Timer is disabled by reading I/O port 043h.
47 * The Watch-Dog Timer Time-Out Period is set via jumpers.
48 * It can be 1, 2, 10, 20, 110 or 220 seconds.
52 * Includes, defines, variables, module parameters, ...
56 #include <linux/module.h> /* For module specific items */
57 #include <linux/moduleparam.h> /* For new moduleparam's */
58 #include <linux/types.h> /* For standard types (like size_t) */
59 #include <linux/errno.h> /* For the -ENODEV/... values */
60 #include <linux/kernel.h> /* For printk/panic/... */
61 #include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
62 #include <linux/watchdog.h> /* For the watchdog specific items */
63 #include <linux/fs.h> /* For file operations */
64 #include <linux/ioport.h> /* For io-port access */
65 #include <linux/platform_device.h> /* For platform_driver framework */
66 #include <linux/init.h> /* For __init/__exit/... */
68 #include <asm/uaccess.h> /* For copy_to_user/put_user/... */
69 #include <asm/io.h> /* For inb/outb/... */
71 /* Module information */
72 #define DRV_NAME "acquirewdt"
73 #define PFX DRV_NAME ": "
74 #define WATCHDOG_NAME "Acquire WDT"
75 #define WATCHDOG_HEARTBEAT 0 /* There is no way to see what the correct time-out period is */
77 /* internal variables */
78 static struct platform_device
*acq_platform_device
; /* the watchdog platform device */
79 static unsigned long acq_is_open
;
80 static char expect_close
;
82 /* module parameters */
83 static int wdt_stop
= 0x43; /* You must set this - there is no sane way to probe for this board. */
84 module_param(wdt_stop
, int, 0);
85 MODULE_PARM_DESC(wdt_stop
, "Acquire WDT 'stop' io port (default 0x43)");
87 static int wdt_start
= 0x443; /* You must set this - there is no sane way to probe for this board. */
88 module_param(wdt_start
, int, 0);
89 MODULE_PARM_DESC(wdt_start
, "Acquire WDT 'start' io port (default 0x443)");
91 static int nowayout
= WATCHDOG_NOWAYOUT
;
92 module_param(nowayout
, int, 0);
93 MODULE_PARM_DESC(nowayout
, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT
) ")");
99 static void acq_keepalive(void)
101 /* Write a watchdog value */
105 static void acq_stop(void)
107 /* Turn the card off */
112 * /dev/watchdog handling
115 static ssize_t
acq_write(struct file
*file
, const char __user
*buf
, size_t count
, loff_t
*ppos
)
117 /* See if we got the magic character 'V' and reload the timer */
122 /* note: just in case someone wrote the magic character
123 * five months ago... */
126 /* scan to see whether or not we got the magic character */
127 for (i
= 0; i
!= count
; i
++) {
129 if (get_user(c
, buf
+ i
))
136 /* Well, anyhow someone wrote to us, we should return that favour */
142 static int acq_ioctl(struct inode
*inode
, struct file
*file
, unsigned int cmd
,
145 int options
, retval
= -EINVAL
;
146 void __user
*argp
= (void __user
*)arg
;
147 int __user
*p
= argp
;
148 static struct watchdog_info ident
=
150 .options
= WDIOF_KEEPALIVEPING
| WDIOF_MAGICCLOSE
,
151 .firmware_version
= 1,
152 .identity
= WATCHDOG_NAME
,
157 case WDIOC_GETSUPPORT
:
158 return copy_to_user(argp
, &ident
, sizeof(ident
)) ? -EFAULT
: 0;
160 case WDIOC_GETSTATUS
:
161 case WDIOC_GETBOOTSTATUS
:
162 return put_user(0, p
);
164 case WDIOC_KEEPALIVE
:
168 case WDIOC_GETTIMEOUT
:
169 return put_user(WATCHDOG_HEARTBEAT
, p
);
171 case WDIOC_SETOPTIONS
:
173 if (get_user(options
, p
))
176 if (options
& WDIOS_DISABLECARD
)
182 if (options
& WDIOS_ENABLECARD
)
196 static int acq_open(struct inode
*inode
, struct file
*file
)
198 if (test_and_set_bit(0, &acq_is_open
))
202 __module_get(THIS_MODULE
);
206 return nonseekable_open(inode
, file
);
209 static int acq_close(struct inode
*inode
, struct file
*file
)
211 if (expect_close
== 42) {
214 printk(KERN_CRIT PFX
"Unexpected close, not stopping watchdog!\n");
217 clear_bit(0, &acq_is_open
);
226 static const struct file_operations acq_fops
= {
227 .owner
= THIS_MODULE
,
232 .release
= acq_close
,
235 static struct miscdevice acq_miscdev
= {
236 .minor
= WATCHDOG_MINOR
,
242 * Init & exit routines
245 static int __devinit
acq_probe(struct platform_device
*dev
)
249 if (wdt_stop
!= wdt_start
) {
250 if (!request_region(wdt_stop
, 1, WATCHDOG_NAME
)) {
251 printk (KERN_ERR PFX
"I/O address 0x%04x already in use\n",
258 if (!request_region(wdt_start
, 1, WATCHDOG_NAME
)) {
259 printk (KERN_ERR PFX
"I/O address 0x%04x already in use\n",
265 ret
= misc_register(&acq_miscdev
);
267 printk (KERN_ERR PFX
"cannot register miscdev on minor=%d (err=%d)\n",
268 WATCHDOG_MINOR
, ret
);
272 printk (KERN_INFO PFX
"initialized. (nowayout=%d)\n",
278 release_region(wdt_start
, 1);
280 if (wdt_stop
!= wdt_start
)
281 release_region(wdt_stop
, 1);
286 static int __devexit
acq_remove(struct platform_device
*dev
)
288 misc_deregister(&acq_miscdev
);
289 release_region(wdt_start
,1);
290 if(wdt_stop
!= wdt_start
)
291 release_region(wdt_stop
,1);
296 static void acq_shutdown(struct platform_device
*dev
)
298 /* Turn the WDT off if we have a soft shutdown */
302 static struct platform_driver acquirewdt_driver
= {
304 .remove
= __devexit_p(acq_remove
),
305 .shutdown
= acq_shutdown
,
307 .owner
= THIS_MODULE
,
312 static int __init
acq_init(void)
316 printk(KERN_INFO
"WDT driver for Acquire single board computer initialising.\n");
318 err
= platform_driver_register(&acquirewdt_driver
);
322 acq_platform_device
= platform_device_register_simple(DRV_NAME
, -1, NULL
, 0);
323 if (IS_ERR(acq_platform_device
)) {
324 err
= PTR_ERR(acq_platform_device
);
325 goto unreg_platform_driver
;
330 unreg_platform_driver
:
331 platform_driver_unregister(&acquirewdt_driver
);
335 static void __exit
acq_exit(void)
337 platform_device_unregister(acq_platform_device
);
338 platform_driver_unregister(&acquirewdt_driver
);
339 printk(KERN_INFO PFX
"Watchdog Module Unloaded.\n");
342 module_init(acq_init
);
343 module_exit(acq_exit
);
345 MODULE_AUTHOR("David Woodhouse");
346 MODULE_DESCRIPTION("Acquire Inc. Single Board Computer Watchdog Timer driver");
347 MODULE_LICENSE("GPL");
348 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR
);