1 /* cpudata.h: Per-cpu parameters.
3 * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
6 #ifndef _SPARC64_CPUDATA_H
7 #define _SPARC64_CPUDATA_H
9 #include <asm/hypervisor.h>
14 #include <linux/percpu.h>
15 #include <linux/threads.h>
19 unsigned int __softirq_pending
; /* must be 1st, see rtrap.S */
20 unsigned int __pad0_1
;
21 unsigned int __pad0_2
;
23 unsigned long clock_tick
; /* %tick's per second */
24 unsigned long udelay_val
;
26 /* Dcache line 2, rarely used */
27 unsigned int dcache_size
;
28 unsigned int dcache_line_size
;
29 unsigned int icache_size
;
30 unsigned int icache_line_size
;
31 unsigned int ecache_size
;
32 unsigned int ecache_line_size
;
37 DECLARE_PER_CPU(cpuinfo_sparc
, __cpu_data
);
38 #define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
39 #define local_cpu_data() __get_cpu_var(__cpu_data)
41 /* Trap handling code needs to get at a few critical values upon
42 * trap entry and to process TSB misses. These cannot be in the
43 * per_cpu() area as we really need to lock them into the TLB and
44 * thus make them part of the main kernel image. As a result we
45 * try to make this as small as possible.
47 * This is padded out and aligned to 64-bytes to avoid false sharing
51 /* If you modify the size of this structure, please update
52 * TRAP_BLOCK_SZ_SHIFT below.
56 /* D-cache line 1: Basic thread information, cpu and device mondo queues */
57 struct thread_info
*thread
;
58 unsigned long pgd_paddr
;
59 unsigned long cpu_mondo_pa
;
60 unsigned long dev_mondo_pa
;
62 /* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
63 unsigned long resum_mondo_pa
;
64 unsigned long resum_kernel_buf_pa
;
65 unsigned long nonresum_mondo_pa
;
66 unsigned long nonresum_kernel_buf_pa
;
68 /* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
69 struct hv_fault_status fault_info
;
71 /* Dcache line 7: Physical addresses of CPU send mondo block and CPU list. */
72 unsigned long cpu_mondo_block_pa
;
73 unsigned long cpu_list_pa
;
74 unsigned long tsb_huge
;
75 unsigned long tsb_huge_temp
;
77 /* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size. */
78 unsigned int irq_worklist
;
80 unsigned long __pad2
[3];
81 } __attribute__((aligned(64)));
82 extern struct trap_per_cpu trap_block
[NR_CPUS
];
83 extern void init_cur_cpu_trap(struct thread_info
*);
84 extern void setup_tba(void);
86 struct cpuid_patch_entry
{
88 unsigned int cheetah_safari
[4];
89 unsigned int cheetah_jbus
[4];
90 unsigned int starfire
[4];
91 unsigned int sun4v
[4];
93 extern struct cpuid_patch_entry __cpuid_patch
, __cpuid_patch_end
;
95 struct sun4v_1insn_patch_entry
{
99 extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch
,
100 __sun4v_1insn_patch_end
;
102 struct sun4v_2insn_patch_entry
{
104 unsigned int insns
[2];
106 extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch
,
107 __sun4v_2insn_patch_end
;
109 #endif /* !(__ASSEMBLY__) */
111 #define TRAP_PER_CPU_THREAD 0x00
112 #define TRAP_PER_CPU_PGD_PADDR 0x08
113 #define TRAP_PER_CPU_CPU_MONDO_PA 0x10
114 #define TRAP_PER_CPU_DEV_MONDO_PA 0x18
115 #define TRAP_PER_CPU_RESUM_MONDO_PA 0x20
116 #define TRAP_PER_CPU_RESUM_KBUF_PA 0x28
117 #define TRAP_PER_CPU_NONRESUM_MONDO_PA 0x30
118 #define TRAP_PER_CPU_NONRESUM_KBUF_PA 0x38
119 #define TRAP_PER_CPU_FAULT_INFO 0x40
120 #define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0
121 #define TRAP_PER_CPU_CPU_LIST_PA 0xc8
122 #define TRAP_PER_CPU_TSB_HUGE 0xd0
123 #define TRAP_PER_CPU_TSB_HUGE_TEMP 0xd8
124 #define TRAP_PER_CPU_IRQ_WORKLIST 0xe0
126 #define TRAP_BLOCK_SZ_SHIFT 8
128 #include <asm/scratchpad.h>
130 #define __GET_CPUID(REG) \
131 /* Spitfire implementation (default). */ \
132 661: ldxa [%g0] ASI_UPA_CONFIG, REG; \
134 and REG, 0x1f, REG; \
136 .section .cpuid_patch, "ax"; \
137 /* Instruction location. */ \
139 /* Cheetah Safari implementation. */ \
140 ldxa [%g0] ASI_SAFARI_CONFIG, REG; \
142 and REG, 0x3ff, REG; \
144 /* Cheetah JBUS implementation. */ \
145 ldxa [%g0] ASI_JBUS_CONFIG, REG; \
147 and REG, 0x1f, REG; \
149 /* Starfire implementation. */ \
150 sethi %hi(0x1fff40000d0 >> 9), REG; \
153 lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\
154 /* sun4v implementation. */ \
155 mov SCRATCHPAD_CPUID, REG; \
156 ldxa [REG] ASI_SCRATCHPAD, REG; \
163 #define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
165 sethi %hi(trap_block), DEST; \
166 sllx TMP, TRAP_BLOCK_SZ_SHIFT, TMP; \
167 or DEST, %lo(trap_block), DEST; \
168 add DEST, TMP, DEST; \
170 /* Clobbers TMP, current address space PGD phys address into DEST. */
171 #define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
172 TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
173 ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
175 /* Clobbers TMP, loads local processor's IRQ work area into DEST. */
176 #define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
177 TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
178 add DEST, TRAP_PER_CPU_IRQ_WORKLIST, DEST;
180 /* Clobbers TMP, loads DEST with current thread info pointer. */
181 #define TRAP_LOAD_THREAD_REG(DEST, TMP) \
182 TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
183 ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
185 /* Given the current thread info pointer in THR, load the per-cpu
186 * area base of the current processor into DEST. REG1, REG2, and REG3 are
189 * You absolutely cannot use DEST as a temporary in this code. The
190 * reason is that traps can happen during execution, and return from
191 * trap will load the fully resolved DEST per-cpu base. This can corrupt
192 * the calculations done by the macro mid-stream.
194 #define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \
195 ldub [THR + TI_CPU], REG1; \
196 sethi %hi(__per_cpu_shift), REG3; \
197 sethi %hi(__per_cpu_base), REG2; \
198 ldx [REG3 + %lo(__per_cpu_shift)], REG3; \
199 ldx [REG2 + %lo(__per_cpu_base)], REG2; \
200 sllx REG1, REG3, REG3; \
201 add REG3, REG2, DEST;
205 #define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
206 sethi %hi(trap_block), DEST; \
207 or DEST, %lo(trap_block), DEST; \
209 /* Uniprocessor versions, we know the cpuid is zero. */
210 #define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
211 TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
212 ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
214 /* Clobbers TMP, loads local processor's IRQ work area into DEST. */
215 #define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
216 TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
217 add DEST, TRAP_PER_CPU_IRQ_WORKLIST, DEST;
219 #define TRAP_LOAD_THREAD_REG(DEST, TMP) \
220 TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
221 ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
223 /* No per-cpu areas on uniprocessor, so no need to load DEST. */
224 #define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
226 #endif /* !(CONFIG_SMP) */
228 #endif /* _SPARC64_CPUDATA_H */