wrong memory access in i2o_block_device_lock()

[linux-2.6/mini2440.git] / include / mtd / ubi-header.h

/*
 * Copyright (c) International Business Machines Corp., 2006
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
 * the GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 * Authors: Artem Bityutskiy (Битюцкий Артём)
 *          Thomas Gleixner
 *          Frank Haverkamp
 *          Oliver Lohmann
 *          Andreas Arnez
 */

/*
 * This file defines the layout of UBI headers and all the other UBI on-flash
 * data structures. May be included by user-space.
 */

#ifndef __UBI_HEADER_H__
#define __UBI_HEADER_H__

#include <asm/byteorder.h>

/* The version of UBI images supported by this implementation */
#define UBI_VERSION 1

/* The highest erase counter value supported by this implementation */
#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF

/* The initial CRC32 value used when calculating CRC checksums */
#define UBI_CRC32_INIT 0xFFFFFFFFU

/* Erase counter header magic number (ASCII "UBI#") */
#define UBI_EC_HDR_MAGIC  0x55424923
/* Volume identifier header magic number (ASCII "UBI!") */
#define UBI_VID_HDR_MAGIC 0x55424921

/*
 * Volume type constants used in the volume identifier header.
 *
 * @UBI_VID_DYNAMIC: dynamic volume
 * @UBI_VID_STATIC: static volume
 */
enum {
        UBI_VID_DYNAMIC = 1,
        UBI_VID_STATIC  = 2
};

/*
 * Compatibility constants used by internal volumes.
 *
 * @UBI_COMPAT_DELETE: delete this internal volume before anything is written
 * to the flash
 * @UBI_COMPAT_RO: attach this device in read-only mode
 * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
 * physical eraseblocks, don't allow the wear-leveling unit to move them
 * @UBI_COMPAT_REJECT: reject this UBI image
 */
enum {
        UBI_COMPAT_DELETE   = 1,
        UBI_COMPAT_RO       = 2,
        UBI_COMPAT_PRESERVE = 4,
        UBI_COMPAT_REJECT   = 5
};

/*
 * ubi16_t/ubi32_t/ubi64_t - 16, 32, and 64-bit integers used in UBI on-flash
 * data structures.
 */
typedef struct {
        uint16_t int16;
} __attribute__ ((packed)) ubi16_t;

typedef struct {
        uint32_t int32;
} __attribute__ ((packed)) ubi32_t;

typedef struct {
        uint64_t int64;
} __attribute__ ((packed)) ubi64_t;

/*
 * In this implementation of UBI uses the big-endian format for on-flash
 * integers. The below are the corresponding conversion macros.
 */
#define cpu_to_ubi16(x) ((ubi16_t){__cpu_to_be16(x)})
#define ubi16_to_cpu(x) ((uint16_t)__be16_to_cpu((x).int16))

#define cpu_to_ubi32(x) ((ubi32_t){__cpu_to_be32(x)})
#define ubi32_to_cpu(x) ((uint32_t)__be32_to_cpu((x).int32))

#define cpu_to_ubi64(x) ((ubi64_t){__cpu_to_be64(x)})
#define ubi64_to_cpu(x) ((uint64_t)__be64_to_cpu((x).int64))

/* Sizes of UBI headers */
#define UBI_EC_HDR_SIZE  sizeof(struct ubi_ec_hdr)
#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr)

/* Sizes of UBI headers without the ending CRC */
#define UBI_EC_HDR_SIZE_CRC  (UBI_EC_HDR_SIZE  - sizeof(ubi32_t))
#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(ubi32_t))

/**
 * struct ubi_ec_hdr - UBI erase counter header.
 * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC)
 * @version: version of UBI implementation which is supposed to accept this
 * UBI image
 * @padding1: reserved for future, zeroes
 * @ec: the erase counter
 * @vid_hdr_offset: where the VID header starts
 * @data_offset: where the user data start
 * @padding2: reserved for future, zeroes
 * @hdr_crc: erase counter header CRC checksum
 *
 * The erase counter header takes 64 bytes and has a plenty of unused space for
 * future usage. The unused fields are zeroed. The @version field is used to
 * indicate the version of UBI implementation which is supposed to be able to
 * work with this UBI image. If @version is greater then the current UBI
 * version, the image is rejected. This may be useful in future if something
 * is changed radically. This field is duplicated in the volume identifier
 * header.
 *
 * The @vid_hdr_offset and @data_offset fields contain the offset of the the
 * volume identifier header and user data, relative to the beginning of the
 * physical eraseblock. These values have to be the same for all physical
 * eraseblocks.
 */
struct ubi_ec_hdr {
        ubi32_t magic;
        uint8_t version;
        uint8_t padding1[3];
        ubi64_t ec; /* Warning: the current limit is 31-bit anyway! */
        ubi32_t vid_hdr_offset;
        ubi32_t data_offset;
        uint8_t padding2[36];
        ubi32_t hdr_crc;
} __attribute__ ((packed));

/**
 * struct ubi_vid_hdr - on-flash UBI volume identifier header.
 * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC)
 * @version: UBI implementation version which is supposed to accept this UBI
 * image (%UBI_VERSION)
 * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC)
 * @copy_flag: if this logical eraseblock was copied from another physical
 * eraseblock (for wear-leveling reasons)
 * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE,
 * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
 * @vol_id: ID of this volume
 * @lnum: logical eraseblock number
 * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be
 * removed, kept only for not breaking older UBI users)
 * @data_size: how many bytes of data this logical eraseblock contains
 * @used_ebs: total number of used logical eraseblocks in this volume
 * @data_pad: how many bytes at the end of this physical eraseblock are not
 * used
 * @data_crc: CRC checksum of the data stored in this logical eraseblock
 * @padding1: reserved for future, zeroes
 * @sqnum: sequence number
 * @padding2: reserved for future, zeroes
 * @hdr_crc: volume identifier header CRC checksum
 *
 * The @sqnum is the value of the global sequence counter at the time when this
 * VID header was created. The global sequence counter is incremented each time
 * UBI writes a new VID header to the flash, i.e. when it maps a logical
 * eraseblock to a new physical eraseblock. The global sequence counter is an
 * unsigned 64-bit integer and we assume it never overflows. The @sqnum
 * (sequence number) is used to distinguish between older and newer versions of
 * logical eraseblocks.
 *
 * There are 2 situations when there may be more then one physical eraseblock
 * corresponding to the same logical eraseblock, i.e., having the same @vol_id
 * and @lnum values in the volume identifier header. Suppose we have a logical
 * eraseblock L and it is mapped to the physical eraseblock P.
 *
 * 1. Because UBI may erase physical eraseblocks asynchronously, the following
 * situation is possible: L is asynchronously erased, so P is scheduled for
 * erasure, then L is written to,i.e. mapped to another physical eraseblock P1,
 * so P1 is written to, then an unclean reboot happens. Result - there are 2
 * physical eraseblocks P and P1 corresponding to the same logical eraseblock
 * L. But P1 has greater sequence number, so UBI picks P1 when it attaches the
 * flash.
 *
 * 2. From time to time UBI moves logical eraseblocks to other physical
 * eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P
 * to P1, and an unclean reboot happens before P is physically erased, there
 * are two physical eraseblocks P and P1 corresponding to L and UBI has to
 * select one of them when the flash is attached. The @sqnum field says which
 * PEB is the original (obviously P will have lower @sqnum) and the copy. But
 * it is not enough to select the physical eraseblock with the higher sequence
 * number, because the unclean reboot could have happen in the middle of the
 * copying process, so the data in P is corrupted. It is also not enough to
 * just select the physical eraseblock with lower sequence number, because the
 * data there may be old (consider a case if more data was added to P1 after
 * the copying). Moreover, the unclean reboot may happen when the erasure of P
 * was just started, so it result in unstable P, which is "mostly" OK, but
 * still has unstable bits.
 *
 * UBI uses the @copy_flag field to indicate that this logical eraseblock is a
 * copy. UBI also calculates data CRC when the data is moved and stores it at
 * the @data_crc field of the copy (P1). So when UBI needs to pick one physical
 * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is
 * examined. If it is cleared, the situation* is simple and the newer one is
 * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC
 * checksum is correct, this physical eraseblock is selected (P1). Otherwise
 * the older one (P) is selected.
 *
 * Note, there is an obsolete @leb_ver field which was used instead of @sqnum
 * in the past. But it is not used anymore and we keep it in order to be able
 * to deal with old UBI images. It will be removed at some point.
 *
 * There are 2 sorts of volumes in UBI: user volumes and internal volumes.
 * Internal volumes are not seen from outside and are used for various internal
 * UBI purposes. In this implementation there is only one internal volume - the
 * layout volume. Internal volumes are the main mechanism of UBI extensions.
 * For example, in future one may introduce a journal internal volume. Internal
 * volumes have their own reserved range of IDs.
 *
 * The @compat field is only used for internal volumes and contains the "degree
 * of their compatibility". It is always zero for user volumes. This field
 * provides a mechanism to introduce UBI extensions and to be still compatible
 * with older UBI binaries. For example, if someone introduced a journal in
 * future, he would probably use %UBI_COMPAT_DELETE compatibility for the
 * journal volume.  And in this case, older UBI binaries, which know nothing
 * about the journal volume, would just delete this volume and work perfectly
 * fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image
 * - it just ignores the Ext3fs journal.
 *
 * The @data_crc field contains the CRC checksum of the contents of the logical
 * eraseblock if this is a static volume. In case of dynamic volumes, it does
 * not contain the CRC checksum as a rule. The only exception is when the
 * data of the physical eraseblock was moved by the wear-leveling unit, then
 * the wear-leveling unit calculates the data CRC and stores it in the
 * @data_crc field. And of course, the @copy_flag is %in this case.
 *
 * The @data_size field is used only for static volumes because UBI has to know
 * how many bytes of data are stored in this eraseblock. For dynamic volumes,
 * this field usually contains zero. The only exception is when the data of the
 * physical eraseblock was moved to another physical eraseblock for
 * wear-leveling reasons. In this case, UBI calculates CRC checksum of the
 * contents and uses both @data_crc and @data_size fields. In this case, the
 * @data_size field contains data size.
 *
 * The @used_ebs field is used only for static volumes and indicates how many
 * eraseblocks the data of the volume takes. For dynamic volumes this field is
 * not used and always contains zero.
 *
 * The @data_pad is calculated when volumes are created using the alignment
 * parameter. So, effectively, the @data_pad field reduces the size of logical
 * eraseblocks of this volume. This is very handy when one uses block-oriented
 * software (say, cramfs) on top of the UBI volume.
 */
struct ubi_vid_hdr {
        ubi32_t magic;
        uint8_t version;
        uint8_t vol_type;
        uint8_t copy_flag;
        uint8_t compat;
        ubi32_t vol_id;
        ubi32_t lnum;
        ubi32_t leb_ver; /* obsolete, to be removed, don't use */
        ubi32_t data_size;
        ubi32_t used_ebs;
        ubi32_t data_pad;
        ubi32_t data_crc;
        uint8_t padding1[4];
        ubi64_t sqnum;
        uint8_t padding2[12];
        ubi32_t hdr_crc;
} __attribute__ ((packed));

/* Internal UBI volumes count */
#define UBI_INT_VOL_COUNT 1

/*
 * Starting ID of internal volumes. There is reserved room for 4096 internal
 * volumes.
 */
#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)

/* The layout volume contains the volume table */

#define UBI_LAYOUT_VOL_ID        UBI_INTERNAL_VOL_START
#define UBI_LAYOUT_VOLUME_EBS    2
#define UBI_LAYOUT_VOLUME_NAME   "layout volume"
#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT

/* The maximum number of volumes per one UBI device */
#define UBI_MAX_VOLUMES 128

/* The maximum volume name length */
#define UBI_VOL_NAME_MAX 127

/* Size of the volume table record */
#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record)

/* Size of the volume table record without the ending CRC */
#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(ubi32_t))

/**
 * struct ubi_vtbl_record - a record in the volume table.
 * @reserved_pebs: how many physical eraseblocks are reserved for this volume
 * @alignment: volume alignment
 * @data_pad: how many bytes are unused at the end of the each physical
 * eraseblock to satisfy the requested alignment
 * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
 * @upd_marker: if volume update was started but not finished
 * @name_len: volume name length
 * @name: the volume name
 * @padding2: reserved, zeroes
 * @crc: a CRC32 checksum of the record
 *
 * The volume table records are stored in the volume table, which is stored in
 * the layout volume. The layout volume consists of 2 logical eraseblock, each
 * of which contains a copy of the volume table (i.e., the volume table is
 * duplicated). The volume table is an array of &struct ubi_vtbl_record
 * objects indexed by the volume ID.
 *
 * If the size of the logical eraseblock is large enough to fit
 * %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES
 * records. Otherwise, it contains as many records as it can fit (i.e., size of
 * logical eraseblock divided by sizeof(struct ubi_vtbl_record)).
 *
 * The @upd_marker flag is used to implement volume update. It is set to %1
 * before update and set to %0 after the update. So if the update operation was
 * interrupted, UBI knows that the volume is corrupted.
 *
 * The @alignment field is specified when the volume is created and cannot be
 * later changed. It may be useful, for example, when a block-oriented file
 * system works on top of UBI. The @data_pad field is calculated using the
 * logical eraseblock size and @alignment. The alignment must be multiple to the
 * minimal flash I/O unit. If @alignment is 1, all the available space of
 * the physical eraseblocks is used.
 *
 * Empty records contain all zeroes and the CRC checksum of those zeroes.
 */
struct ubi_vtbl_record {
        ubi32_t reserved_pebs;
        ubi32_t alignment;
        ubi32_t data_pad;
        uint8_t vol_type;
        uint8_t upd_marker;
        ubi16_t name_len;
        uint8_t name[UBI_VOL_NAME_MAX+1];
        uint8_t padding2[24];
        ubi32_t crc;
} __attribute__ ((packed));

#endif /* !__UBI_HEADER_H__ */