intel-iommu: Fix one last ia64 build problem in Pass Through Support
[linux-2.6/mini2440.git] / mm / pdflush.c
blobf2caf96993f851050a90b88d449ff13084da1c58
1 /*
2 * mm/pdflush.c - worker threads for writing back filesystem data
4 * Copyright (C) 2002, Linus Torvalds.
6 * 09Apr2002 Andrew Morton
7 * Initial version
8 * 29Feb2004 kaos@sgi.com
9 * Move worker thread creation to kthread to avoid chewing
10 * up stack space with nested calls to kernel_thread.
13 #include <linux/sched.h>
14 #include <linux/list.h>
15 #include <linux/signal.h>
16 #include <linux/spinlock.h>
17 #include <linux/gfp.h>
18 #include <linux/init.h>
19 #include <linux/module.h>
20 #include <linux/fs.h> /* Needed by writeback.h */
21 #include <linux/writeback.h> /* Prototypes pdflush_operation() */
22 #include <linux/kthread.h>
23 #include <linux/cpuset.h>
24 #include <linux/freezer.h>
28 * Minimum and maximum number of pdflush instances
30 #define MIN_PDFLUSH_THREADS 2
31 #define MAX_PDFLUSH_THREADS 8
33 static void start_one_pdflush_thread(void);
37 * The pdflush threads are worker threads for writing back dirty data.
38 * Ideally, we'd like one thread per active disk spindle. But the disk
39 * topology is very hard to divine at this level. Instead, we take
40 * care in various places to prevent more than one pdflush thread from
41 * performing writeback against a single filesystem. pdflush threads
42 * have the PF_FLUSHER flag set in current->flags to aid in this.
46 * All the pdflush threads. Protected by pdflush_lock
48 static LIST_HEAD(pdflush_list);
49 static DEFINE_SPINLOCK(pdflush_lock);
52 * The count of currently-running pdflush threads. Protected
53 * by pdflush_lock.
55 * Readable by sysctl, but not writable. Published to userspace at
56 * /proc/sys/vm/nr_pdflush_threads.
58 int nr_pdflush_threads = 0;
61 * The max/min number of pdflush threads. R/W by sysctl at
62 * /proc/sys/vm/nr_pdflush_threads_max/min
64 int nr_pdflush_threads_max __read_mostly = MAX_PDFLUSH_THREADS;
65 int nr_pdflush_threads_min __read_mostly = MIN_PDFLUSH_THREADS;
69 * The time at which the pdflush thread pool last went empty
71 static unsigned long last_empty_jifs;
74 * The pdflush thread.
76 * Thread pool management algorithm:
78 * - The minimum and maximum number of pdflush instances are bound
79 * by nr_pdflush_threads_min and nr_pdflush_threads_max.
81 * - If there have been no idle pdflush instances for 1 second, create
82 * a new one.
84 * - If the least-recently-went-to-sleep pdflush thread has been asleep
85 * for more than one second, terminate a thread.
89 * A structure for passing work to a pdflush thread. Also for passing
90 * state information between pdflush threads. Protected by pdflush_lock.
92 struct pdflush_work {
93 struct task_struct *who; /* The thread */
94 void (*fn)(unsigned long); /* A callback function */
95 unsigned long arg0; /* An argument to the callback */
96 struct list_head list; /* On pdflush_list, when idle */
97 unsigned long when_i_went_to_sleep;
100 static int __pdflush(struct pdflush_work *my_work)
102 current->flags |= PF_FLUSHER | PF_SWAPWRITE;
103 set_freezable();
104 my_work->fn = NULL;
105 my_work->who = current;
106 INIT_LIST_HEAD(&my_work->list);
108 spin_lock_irq(&pdflush_lock);
109 for ( ; ; ) {
110 struct pdflush_work *pdf;
112 set_current_state(TASK_INTERRUPTIBLE);
113 list_move(&my_work->list, &pdflush_list);
114 my_work->when_i_went_to_sleep = jiffies;
115 spin_unlock_irq(&pdflush_lock);
116 schedule();
117 try_to_freeze();
118 spin_lock_irq(&pdflush_lock);
119 if (!list_empty(&my_work->list)) {
121 * Someone woke us up, but without removing our control
122 * structure from the global list. swsusp will do this
123 * in try_to_freeze()->refrigerator(). Handle it.
125 my_work->fn = NULL;
126 continue;
128 if (my_work->fn == NULL) {
129 printk("pdflush: bogus wakeup\n");
130 continue;
132 spin_unlock_irq(&pdflush_lock);
134 (*my_work->fn)(my_work->arg0);
136 spin_lock_irq(&pdflush_lock);
139 * Thread creation: For how long have there been zero
140 * available threads?
142 * To throttle creation, we reset last_empty_jifs.
144 if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
145 if (list_empty(&pdflush_list) &&
146 nr_pdflush_threads < nr_pdflush_threads_max) {
147 last_empty_jifs = jiffies;
148 nr_pdflush_threads++;
149 spin_unlock_irq(&pdflush_lock);
150 start_one_pdflush_thread();
151 spin_lock_irq(&pdflush_lock);
155 my_work->fn = NULL;
158 * Thread destruction: For how long has the sleepiest
159 * thread slept?
161 if (list_empty(&pdflush_list))
162 continue;
163 if (nr_pdflush_threads <= nr_pdflush_threads_min)
164 continue;
165 pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
166 if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
167 /* Limit exit rate */
168 pdf->when_i_went_to_sleep = jiffies;
169 break; /* exeunt */
172 nr_pdflush_threads--;
173 spin_unlock_irq(&pdflush_lock);
174 return 0;
178 * Of course, my_work wants to be just a local in __pdflush(). It is
179 * separated out in this manner to hopefully prevent the compiler from
180 * performing unfortunate optimisations against the auto variables. Because
181 * these are visible to other tasks and CPUs. (No problem has actually
182 * been observed. This is just paranoia).
184 static int pdflush(void *dummy)
186 struct pdflush_work my_work;
187 cpumask_var_t cpus_allowed;
190 * Since the caller doesn't even check kthread_run() worked, let's not
191 * freak out too much if this fails.
193 if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
194 printk(KERN_WARNING "pdflush failed to allocate cpumask\n");
195 return 0;
199 * pdflush can spend a lot of time doing encryption via dm-crypt. We
200 * don't want to do that at keventd's priority.
202 set_user_nice(current, 0);
205 * Some configs put our parent kthread in a limited cpuset,
206 * which kthread() overrides, forcing cpus_allowed == cpu_all_mask.
207 * Our needs are more modest - cut back to our cpusets cpus_allowed.
208 * This is needed as pdflush's are dynamically created and destroyed.
209 * The boottime pdflush's are easily placed w/o these 2 lines.
211 cpuset_cpus_allowed(current, cpus_allowed);
212 set_cpus_allowed_ptr(current, cpus_allowed);
213 free_cpumask_var(cpus_allowed);
215 return __pdflush(&my_work);
219 * Attempt to wake up a pdflush thread, and get it to do some work for you.
220 * Returns zero if it indeed managed to find a worker thread, and passed your
221 * payload to it.
223 int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0)
225 unsigned long flags;
226 int ret = 0;
228 BUG_ON(fn == NULL); /* Hard to diagnose if it's deferred */
230 spin_lock_irqsave(&pdflush_lock, flags);
231 if (list_empty(&pdflush_list)) {
232 ret = -1;
233 } else {
234 struct pdflush_work *pdf;
236 pdf = list_entry(pdflush_list.next, struct pdflush_work, list);
237 list_del_init(&pdf->list);
238 if (list_empty(&pdflush_list))
239 last_empty_jifs = jiffies;
240 pdf->fn = fn;
241 pdf->arg0 = arg0;
242 wake_up_process(pdf->who);
244 spin_unlock_irqrestore(&pdflush_lock, flags);
246 return ret;
249 static void start_one_pdflush_thread(void)
251 struct task_struct *k;
253 k = kthread_run(pdflush, NULL, "pdflush");
254 if (unlikely(IS_ERR(k))) {
255 spin_lock_irq(&pdflush_lock);
256 nr_pdflush_threads--;
257 spin_unlock_irq(&pdflush_lock);
261 static int __init pdflush_init(void)
263 int i;
266 * Pre-set nr_pdflush_threads... If we fail to create,
267 * the count will be decremented.
269 nr_pdflush_threads = nr_pdflush_threads_min;
271 for (i = 0; i < nr_pdflush_threads_min; i++)
272 start_one_pdflush_thread();
273 return 0;
276 module_init(pdflush_init);