Linux 3.18-rc4
[linux-2.6/luiz-linux-2.6.git] / drivers / watchdog / pnx4008_wdt.c
blob15fb316e94374950e5e6c5baaaad5313bd807b9d
1 /*
2 * drivers/char/watchdog/pnx4008_wdt.c
4 * Watchdog driver for PNX4008 board
6 * Authors: Dmitry Chigirev <source@mvista.com>,
7 * Vitaly Wool <vitalywool@gmail.com>
8 * Based on sa1100 driver,
9 * Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
11 * 2005-2006 (c) MontaVista Software, Inc.
13 * (C) 2012 Wolfram Sang, Pengutronix
15 * This file is licensed under the terms of the GNU General Public License
16 * version 2. This program is licensed "as is" without any warranty of any
17 * kind, whether express or implied.
20 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22 #include <linux/module.h>
23 #include <linux/moduleparam.h>
24 #include <linux/types.h>
25 #include <linux/kernel.h>
26 #include <linux/watchdog.h>
27 #include <linux/platform_device.h>
28 #include <linux/clk.h>
29 #include <linux/spinlock.h>
30 #include <linux/io.h>
31 #include <linux/slab.h>
32 #include <linux/err.h>
33 #include <linux/of.h>
34 #include <mach/hardware.h>
36 /* WatchDog Timer - Chapter 23 Page 207 */
38 #define DEFAULT_HEARTBEAT 19
39 #define MAX_HEARTBEAT 60
41 /* Watchdog timer register set definition */
42 #define WDTIM_INT(p) ((p) + 0x0)
43 #define WDTIM_CTRL(p) ((p) + 0x4)
44 #define WDTIM_COUNTER(p) ((p) + 0x8)
45 #define WDTIM_MCTRL(p) ((p) + 0xC)
46 #define WDTIM_MATCH0(p) ((p) + 0x10)
47 #define WDTIM_EMR(p) ((p) + 0x14)
48 #define WDTIM_PULSE(p) ((p) + 0x18)
49 #define WDTIM_RES(p) ((p) + 0x1C)
51 /* WDTIM_INT bit definitions */
52 #define MATCH_INT 1
54 /* WDTIM_CTRL bit definitions */
55 #define COUNT_ENAB 1
56 #define RESET_COUNT (1 << 1)
57 #define DEBUG_EN (1 << 2)
59 /* WDTIM_MCTRL bit definitions */
60 #define MR0_INT 1
61 #undef RESET_COUNT0
62 #define RESET_COUNT0 (1 << 2)
63 #define STOP_COUNT0 (1 << 2)
64 #define M_RES1 (1 << 3)
65 #define M_RES2 (1 << 4)
66 #define RESFRC1 (1 << 5)
67 #define RESFRC2 (1 << 6)
69 /* WDTIM_EMR bit definitions */
70 #define EXT_MATCH0 1
71 #define MATCH_OUTPUT_HIGH (2 << 4) /*a MATCH_CTRL setting */
73 /* WDTIM_RES bit definitions */
74 #define WDOG_RESET 1 /* read only */
76 #define WDOG_COUNTER_RATE 13000000 /*the counter clock is 13 MHz fixed */
78 static bool nowayout = WATCHDOG_NOWAYOUT;
79 static unsigned int heartbeat = DEFAULT_HEARTBEAT;
81 static DEFINE_SPINLOCK(io_lock);
82 static void __iomem *wdt_base;
83 struct clk *wdt_clk;
85 static int pnx4008_wdt_start(struct watchdog_device *wdd)
87 spin_lock(&io_lock);
89 /* stop counter, initiate counter reset */
90 writel(RESET_COUNT, WDTIM_CTRL(wdt_base));
91 /*wait for reset to complete. 100% guarantee event */
92 while (readl(WDTIM_COUNTER(wdt_base)))
93 cpu_relax();
94 /* internal and external reset, stop after that */
95 writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, WDTIM_MCTRL(wdt_base));
96 /* configure match output */
97 writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base));
98 /* clear interrupt, just in case */
99 writel(MATCH_INT, WDTIM_INT(wdt_base));
100 /* the longest pulse period 65541/(13*10^6) seconds ~ 5 ms. */
101 writel(0xFFFF, WDTIM_PULSE(wdt_base));
102 writel(wdd->timeout * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base));
103 /*enable counter, stop when debugger active */
104 writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base));
106 spin_unlock(&io_lock);
107 return 0;
110 static int pnx4008_wdt_stop(struct watchdog_device *wdd)
112 spin_lock(&io_lock);
114 writel(0, WDTIM_CTRL(wdt_base)); /*stop counter */
116 spin_unlock(&io_lock);
117 return 0;
120 static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
121 unsigned int new_timeout)
123 wdd->timeout = new_timeout;
124 return 0;
127 static const struct watchdog_info pnx4008_wdt_ident = {
128 .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
129 WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
130 .identity = "PNX4008 Watchdog",
133 static const struct watchdog_ops pnx4008_wdt_ops = {
134 .owner = THIS_MODULE,
135 .start = pnx4008_wdt_start,
136 .stop = pnx4008_wdt_stop,
137 .set_timeout = pnx4008_wdt_set_timeout,
140 static struct watchdog_device pnx4008_wdd = {
141 .info = &pnx4008_wdt_ident,
142 .ops = &pnx4008_wdt_ops,
143 .timeout = DEFAULT_HEARTBEAT,
144 .min_timeout = 1,
145 .max_timeout = MAX_HEARTBEAT,
148 static int pnx4008_wdt_probe(struct platform_device *pdev)
150 struct resource *r;
151 int ret = 0;
153 watchdog_init_timeout(&pnx4008_wdd, heartbeat, &pdev->dev);
155 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
156 wdt_base = devm_ioremap_resource(&pdev->dev, r);
157 if (IS_ERR(wdt_base))
158 return PTR_ERR(wdt_base);
160 wdt_clk = devm_clk_get(&pdev->dev, NULL);
161 if (IS_ERR(wdt_clk))
162 return PTR_ERR(wdt_clk);
164 ret = clk_enable(wdt_clk);
165 if (ret)
166 return ret;
168 pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
169 WDIOF_CARDRESET : 0;
170 watchdog_set_nowayout(&pnx4008_wdd, nowayout);
172 pnx4008_wdt_stop(&pnx4008_wdd); /* disable for now */
174 ret = watchdog_register_device(&pnx4008_wdd);
175 if (ret < 0) {
176 dev_err(&pdev->dev, "cannot register watchdog device\n");
177 goto disable_clk;
180 dev_info(&pdev->dev, "PNX4008 Watchdog Timer: heartbeat %d sec\n",
181 pnx4008_wdd.timeout);
183 return 0;
185 disable_clk:
186 clk_disable(wdt_clk);
187 return ret;
190 static int pnx4008_wdt_remove(struct platform_device *pdev)
192 watchdog_unregister_device(&pnx4008_wdd);
194 clk_disable(wdt_clk);
196 return 0;
199 #ifdef CONFIG_OF
200 static const struct of_device_id pnx4008_wdt_match[] = {
201 { .compatible = "nxp,pnx4008-wdt" },
204 MODULE_DEVICE_TABLE(of, pnx4008_wdt_match);
205 #endif
207 static struct platform_driver platform_wdt_driver = {
208 .driver = {
209 .name = "pnx4008-watchdog",
210 .owner = THIS_MODULE,
211 .of_match_table = of_match_ptr(pnx4008_wdt_match),
213 .probe = pnx4008_wdt_probe,
214 .remove = pnx4008_wdt_remove,
217 module_platform_driver(platform_wdt_driver);
219 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
220 MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
221 MODULE_DESCRIPTION("PNX4008 Watchdog Driver");
223 module_param(heartbeat, uint, 0);
224 MODULE_PARM_DESC(heartbeat,
225 "Watchdog heartbeat period in seconds from 1 to "
226 __MODULE_STRING(MAX_HEARTBEAT) ", default "
227 __MODULE_STRING(DEFAULT_HEARTBEAT));
229 module_param(nowayout, bool, 0);
230 MODULE_PARM_DESC(nowayout,
231 "Set to 1 to keep watchdog running after device release");
233 MODULE_LICENSE("GPL");
234 MODULE_ALIAS("platform:pnx4008-watchdog");