3 * A collection of structures, addresses, and values associated with
4 * the RPCG RPX-Lite board. Copied from the MBX stuff.
6 * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
8 #ifndef __MACH_RPX_DEFS
9 #define __MACH_RPX_DEFS
11 /* A Board Information structure that is given to a program when
14 typedef struct bd_info
{
15 unsigned int bi_memstart
; /* Memory start address */
16 unsigned int bi_memsize
; /* Memory (end) size in bytes */
17 unsigned int bi_intfreq
; /* Internal Freq, in Hz */
18 unsigned int bi_busfreq
; /* Bus Freq, in Hz */
19 unsigned char bi_enetaddr
[6];
20 unsigned int bi_baudrate
;
23 extern bd_t m8xx_board_info
;
25 /* Memory map is configured by the PROM startup.
26 * We just map a few things we need. The CSR is actually 4 byte-wide
27 * registers that can be accessed as 8-, 16-, or 32-bit values.
29 #define RPX_CSR_ADDR ((uint)0xfa400000)
30 #define RPX_CSR_SIZE ((uint)(4 * 1024))
31 #define IMAP_ADDR ((uint)0xfa200000)
32 #define IMAP_SIZE ((uint)(64 * 1024))
33 #define HIOX_CSR_ADDR ((uint)0xfac00000)
34 #define HIOX_CSR_SIZE ((uint)(4 * 1024))
35 #define PCMCIA_MEM_ADDR ((uint)0x04000000)
36 #define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
37 #define PCMCIA_IO_ADDR ((uint)0x04400000)
38 #define PCMCIA_IO_SIZE ((uint)(4 * 1024))
40 /* Things of interest in the CSR.
42 #define BCSR0_ETHEN ((uint)0x80000000)
43 #define BCSR0_ETHLPBK ((uint)0x40000000)
44 #define BCSR0_COLTESTDIS ((uint)0x20000000)
45 #define BCSR0_FULLDPLXDIS ((uint)0x10000000)
46 #define BCSR0_LEDOFF ((uint)0x08000000)
47 #define BCSR0_USBDISABLE ((uint)0x04000000)
48 #define BCSR0_USBHISPEED ((uint)0x02000000)
49 #define BCSR0_USBPWREN ((uint)0x01000000)
50 #define BCSR0_PCMCIAVOLT ((uint)0x000f0000)
51 #define BCSR0_PCMCIA3VOLT ((uint)0x000a0000)
52 #define BCSR0_PCMCIA5VOLT ((uint)0x00060000)
54 /* HIO Expansion card.
56 #define HIOX_CSR_ENAUDIO ((uint)0x00000200)
57 #define HIOX_CSR_RSTAUDIO ((uint)0x00000100) /* 0 == reset */
59 /* We don't use the 8259.
61 #define NR_8259_INTS 0
65 #define _MACH_8xx (_MACH_rpxlite)