MIPS: Yosemite, Emma: Fix off-by-two in arcs_cmdline buffer size check
[linux-2.6/linux-mips.git] / arch / arm / mach-ixp4xx / gtwx5715-setup.c
blobaa029fc19140b133f8cec8cdca9ab61bcb917d99
1 /*
2 * arch/arm/mach-ixp4xx/gtwx5715-setup.c
4 * Gemtek GTWX5715 (Linksys WRV54G) board setup
6 * Copyright (C) 2004 George T. Joseph
7 * Derived from Coyote
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
25 #include <linux/init.h>
26 #include <linux/device.h>
27 #include <linux/serial.h>
28 #include <linux/tty.h>
29 #include <linux/serial_8250.h>
30 #include <asm/types.h>
31 #include <asm/setup.h>
32 #include <asm/memory.h>
33 #include <mach/hardware.h>
34 #include <asm/irq.h>
35 #include <asm/mach-types.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/flash.h>
39 /* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
40 and operate as an SPI type interface. The details of the interface
41 are available on Kendin/Micrel's web site. */
43 #define GTWX5715_KSSPI_SELECT 5
44 #define GTWX5715_KSSPI_TXD 6
45 #define GTWX5715_KSSPI_CLOCK 7
46 #define GTWX5715_KSSPI_RXD 12
48 /* The "reset" button is wired to GPIO 3.
49 The GPIO is brought "low" when the button is pushed. */
51 #define GTWX5715_BUTTON_GPIO 3
53 /* Board Label Front Label
54 LED1 Power
55 LED2 Wireless-G
56 LED3 not populated but could be
57 LED4 Internet
58 LED5 - LED8 Controlled by KS8995M Switch
59 LED9 DMZ */
61 #define GTWX5715_LED1_GPIO 2
62 #define GTWX5715_LED2_GPIO 9
63 #define GTWX5715_LED3_GPIO 8
64 #define GTWX5715_LED4_GPIO 1
65 #define GTWX5715_LED9_GPIO 4
68 * Xscale UART registers are 32 bits wide with only the least
69 * significant 8 bits having any meaning. From a configuration
70 * perspective, this means 2 things...
72 * Setting .regshift = 2 so that the standard 16550 registers
73 * line up on every 4th byte.
75 * Shifting the register start virtual address +3 bytes when
76 * compiled big-endian. Since register writes are done on a
77 * single byte basis, if the shift isn't done the driver will
78 * write the value into the most significant byte of the register,
79 * which is ignored, instead of the least significant.
82 #ifdef __ARMEB__
83 #define REG_OFFSET 3
84 #else
85 #define REG_OFFSET 0
86 #endif
89 * Only the second or "console" uart is connected on the gtwx5715.
92 static struct resource gtwx5715_uart_resources[] = {
94 .start = IXP4XX_UART2_BASE_PHYS,
95 .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
96 .flags = IORESOURCE_MEM,
99 .start = IRQ_IXP4XX_UART2,
100 .end = IRQ_IXP4XX_UART2,
101 .flags = IORESOURCE_IRQ,
103 { },
107 static struct plat_serial8250_port gtwx5715_uart_platform_data[] = {
109 .mapbase = IXP4XX_UART2_BASE_PHYS,
110 .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
111 .irq = IRQ_IXP4XX_UART2,
112 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
113 .iotype = UPIO_MEM,
114 .regshift = 2,
115 .uartclk = IXP4XX_UART_XTAL,
117 { },
120 static struct platform_device gtwx5715_uart_device = {
121 .name = "serial8250",
122 .id = PLAT8250_DEV_PLATFORM,
123 .dev = {
124 .platform_data = gtwx5715_uart_platform_data,
126 .num_resources = 2,
127 .resource = gtwx5715_uart_resources,
130 static struct flash_platform_data gtwx5715_flash_data = {
131 .map_name = "cfi_probe",
132 .width = 2,
135 static struct resource gtwx5715_flash_resource = {
136 .flags = IORESOURCE_MEM,
139 static struct platform_device gtwx5715_flash = {
140 .name = "IXP4XX-Flash",
141 .id = 0,
142 .dev = {
143 .platform_data = &gtwx5715_flash_data,
145 .num_resources = 1,
146 .resource = &gtwx5715_flash_resource,
149 static struct platform_device *gtwx5715_devices[] __initdata = {
150 &gtwx5715_uart_device,
151 &gtwx5715_flash,
154 static void __init gtwx5715_init(void)
156 ixp4xx_sys_init();
158 gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
159 gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
161 platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
165 MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
166 /* Maintainer: George Joseph */
167 .map_io = ixp4xx_map_io,
168 .init_irq = ixp4xx_init_irq,
169 .timer = &ixp4xx_timer,
170 .atag_offset = 0x100,
171 .init_machine = gtwx5715_init,
172 #if defined(CONFIG_PCI)
173 .dma_zone_size = SZ_64M,
174 #endif
175 MACHINE_END