2 * linux/kernel/signal.c
4 * Copyright (C) 1991, 1992 Linus Torvalds
6 * 1997-11-02 Modified for POSIX.1b signals by Richard Henderson
8 * 2003-06-02 Jim Houston - Concurrent Computer Corp.
9 * Changes to use preallocated sigqueue structures
10 * to allow signals to be sent reliably.
13 #include <linux/config.h>
14 #include <linux/slab.h>
15 #include <linux/module.h>
16 #include <linux/smp_lock.h>
17 #include <linux/init.h>
18 #include <linux/sched.h>
20 #include <linux/tty.h>
21 #include <linux/binfmts.h>
22 #include <linux/security.h>
23 #include <linux/syscalls.h>
24 #include <linux/ptrace.h>
25 #include <linux/signal.h>
26 #include <linux/audit.h>
27 #include <linux/capability.h>
28 #include <asm/param.h>
29 #include <asm/uaccess.h>
30 #include <asm/unistd.h>
31 #include <asm/siginfo.h>
34 * SLAB caches for signal bits.
37 static kmem_cache_t
*sigqueue_cachep
;
40 * In POSIX a signal is sent either to a specific thread (Linux task)
41 * or to the process as a whole (Linux thread group). How the signal
42 * is sent determines whether it's to one thread or the whole group,
43 * which determines which signal mask(s) are involved in blocking it
44 * from being delivered until later. When the signal is delivered,
45 * either it's caught or ignored by a user handler or it has a default
46 * effect that applies to the whole thread group (POSIX process).
48 * The possible effects an unblocked signal set to SIG_DFL can have are:
49 * ignore - Nothing Happens
50 * terminate - kill the process, i.e. all threads in the group,
51 * similar to exit_group. The group leader (only) reports
52 * WIFSIGNALED status to its parent.
53 * coredump - write a core dump file describing all threads using
54 * the same mm and then kill all those threads
55 * stop - stop all the threads in the group, i.e. TASK_STOPPED state
57 * SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
58 * Other signals when not blocked and set to SIG_DFL behaves as follows.
59 * The job control signals also have other special effects.
61 * +--------------------+------------------+
62 * | POSIX signal | default action |
63 * +--------------------+------------------+
64 * | SIGHUP | terminate |
65 * | SIGINT | terminate |
66 * | SIGQUIT | coredump |
67 * | SIGILL | coredump |
68 * | SIGTRAP | coredump |
69 * | SIGABRT/SIGIOT | coredump |
70 * | SIGBUS | coredump |
71 * | SIGFPE | coredump |
72 * | SIGKILL | terminate(+) |
73 * | SIGUSR1 | terminate |
74 * | SIGSEGV | coredump |
75 * | SIGUSR2 | terminate |
76 * | SIGPIPE | terminate |
77 * | SIGALRM | terminate |
78 * | SIGTERM | terminate |
79 * | SIGCHLD | ignore |
80 * | SIGCONT | ignore(*) |
81 * | SIGSTOP | stop(*)(+) |
82 * | SIGTSTP | stop(*) |
83 * | SIGTTIN | stop(*) |
84 * | SIGTTOU | stop(*) |
86 * | SIGXCPU | coredump |
87 * | SIGXFSZ | coredump |
88 * | SIGVTALRM | terminate |
89 * | SIGPROF | terminate |
90 * | SIGPOLL/SIGIO | terminate |
91 * | SIGSYS/SIGUNUSED | coredump |
92 * | SIGSTKFLT | terminate |
93 * | SIGWINCH | ignore |
94 * | SIGPWR | terminate |
95 * | SIGRTMIN-SIGRTMAX | terminate |
96 * +--------------------+------------------+
97 * | non-POSIX signal | default action |
98 * +--------------------+------------------+
99 * | SIGEMT | coredump |
100 * +--------------------+------------------+
102 * (+) For SIGKILL and SIGSTOP the action is "always", not just "default".
103 * (*) Special job control effects:
104 * When SIGCONT is sent, it resumes the process (all threads in the group)
105 * from TASK_STOPPED state and also clears any pending/queued stop signals
106 * (any of those marked with "stop(*)"). This happens regardless of blocking,
107 * catching, or ignoring SIGCONT. When any stop signal is sent, it clears
108 * any pending/queued SIGCONT signals; this happens regardless of blocking,
109 * catching, or ignored the stop signal, though (except for SIGSTOP) the
110 * default action of stopping the process may happen later or never.
114 #define M_SIGEMT M(SIGEMT)
119 #if SIGRTMIN > BITS_PER_LONG
120 #define M(sig) (1ULL << ((sig)-1))
122 #define M(sig) (1UL << ((sig)-1))
124 #define T(sig, mask) (M(sig) & (mask))
126 #define SIG_KERNEL_ONLY_MASK (\
127 M(SIGKILL) | M(SIGSTOP) )
129 #define SIG_KERNEL_STOP_MASK (\
130 M(SIGSTOP) | M(SIGTSTP) | M(SIGTTIN) | M(SIGTTOU) )
132 #define SIG_KERNEL_COREDUMP_MASK (\
133 M(SIGQUIT) | M(SIGILL) | M(SIGTRAP) | M(SIGABRT) | \
134 M(SIGFPE) | M(SIGSEGV) | M(SIGBUS) | M(SIGSYS) | \
135 M(SIGXCPU) | M(SIGXFSZ) | M_SIGEMT )
137 #define SIG_KERNEL_IGNORE_MASK (\
138 M(SIGCONT) | M(SIGCHLD) | M(SIGWINCH) | M(SIGURG) )
140 #define sig_kernel_only(sig) \
141 (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_ONLY_MASK))
142 #define sig_kernel_coredump(sig) \
143 (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_COREDUMP_MASK))
144 #define sig_kernel_ignore(sig) \
145 (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_IGNORE_MASK))
146 #define sig_kernel_stop(sig) \
147 (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_STOP_MASK))
149 #define sig_needs_tasklist(sig) ((sig) == SIGCONT)
151 #define sig_user_defined(t, signr) \
152 (((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_DFL) && \
153 ((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_IGN))
155 #define sig_fatal(t, signr) \
156 (!T(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
157 (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
159 static int sig_ignored(struct task_struct
*t
, int sig
)
161 void __user
* handler
;
164 * Tracers always want to know about signals..
166 if (t
->ptrace
& PT_PTRACED
)
170 * Blocked signals are never ignored, since the
171 * signal handler may change by the time it is
174 if (sigismember(&t
->blocked
, sig
))
177 /* Is it explicitly or implicitly ignored? */
178 handler
= t
->sighand
->action
[sig
-1].sa
.sa_handler
;
179 return handler
== SIG_IGN
||
180 (handler
== SIG_DFL
&& sig_kernel_ignore(sig
));
184 * Re-calculate pending state from the set of locally pending
185 * signals, globally pending signals, and blocked signals.
187 static inline int has_pending_signals(sigset_t
*signal
, sigset_t
*blocked
)
192 switch (_NSIG_WORDS
) {
194 for (i
= _NSIG_WORDS
, ready
= 0; --i
>= 0 ;)
195 ready
|= signal
->sig
[i
] &~ blocked
->sig
[i
];
198 case 4: ready
= signal
->sig
[3] &~ blocked
->sig
[3];
199 ready
|= signal
->sig
[2] &~ blocked
->sig
[2];
200 ready
|= signal
->sig
[1] &~ blocked
->sig
[1];
201 ready
|= signal
->sig
[0] &~ blocked
->sig
[0];
204 case 2: ready
= signal
->sig
[1] &~ blocked
->sig
[1];
205 ready
|= signal
->sig
[0] &~ blocked
->sig
[0];
208 case 1: ready
= signal
->sig
[0] &~ blocked
->sig
[0];
213 #define PENDING(p,b) has_pending_signals(&(p)->signal, (b))
215 fastcall
void recalc_sigpending_tsk(struct task_struct
*t
)
217 if (t
->signal
->group_stop_count
> 0 ||
219 PENDING(&t
->pending
, &t
->blocked
) ||
220 PENDING(&t
->signal
->shared_pending
, &t
->blocked
))
221 set_tsk_thread_flag(t
, TIF_SIGPENDING
);
223 clear_tsk_thread_flag(t
, TIF_SIGPENDING
);
226 void recalc_sigpending(void)
228 recalc_sigpending_tsk(current
);
231 /* Given the mask, find the first available signal that should be serviced. */
234 next_signal(struct sigpending
*pending
, sigset_t
*mask
)
236 unsigned long i
, *s
, *m
, x
;
239 s
= pending
->signal
.sig
;
241 switch (_NSIG_WORDS
) {
243 for (i
= 0; i
< _NSIG_WORDS
; ++i
, ++s
, ++m
)
244 if ((x
= *s
&~ *m
) != 0) {
245 sig
= ffz(~x
) + i
*_NSIG_BPW
+ 1;
250 case 2: if ((x
= s
[0] &~ m
[0]) != 0)
252 else if ((x
= s
[1] &~ m
[1]) != 0)
259 case 1: if ((x
= *s
&~ *m
) != 0)
267 static struct sigqueue
*__sigqueue_alloc(struct task_struct
*t
, gfp_t flags
,
270 struct sigqueue
*q
= NULL
;
272 atomic_inc(&t
->user
->sigpending
);
273 if (override_rlimit
||
274 atomic_read(&t
->user
->sigpending
) <=
275 t
->signal
->rlim
[RLIMIT_SIGPENDING
].rlim_cur
)
276 q
= kmem_cache_alloc(sigqueue_cachep
, flags
);
277 if (unlikely(q
== NULL
)) {
278 atomic_dec(&t
->user
->sigpending
);
280 INIT_LIST_HEAD(&q
->list
);
282 q
->user
= get_uid(t
->user
);
287 static void __sigqueue_free(struct sigqueue
*q
)
289 if (q
->flags
& SIGQUEUE_PREALLOC
)
291 atomic_dec(&q
->user
->sigpending
);
293 kmem_cache_free(sigqueue_cachep
, q
);
296 void flush_sigqueue(struct sigpending
*queue
)
300 sigemptyset(&queue
->signal
);
301 while (!list_empty(&queue
->list
)) {
302 q
= list_entry(queue
->list
.next
, struct sigqueue
, list
);
303 list_del_init(&q
->list
);
309 * Flush all pending signals for a task.
311 void flush_signals(struct task_struct
*t
)
315 spin_lock_irqsave(&t
->sighand
->siglock
, flags
);
316 clear_tsk_thread_flag(t
,TIF_SIGPENDING
);
317 flush_sigqueue(&t
->pending
);
318 flush_sigqueue(&t
->signal
->shared_pending
);
319 spin_unlock_irqrestore(&t
->sighand
->siglock
, flags
);
323 * Flush all handlers for a task.
327 flush_signal_handlers(struct task_struct
*t
, int force_default
)
330 struct k_sigaction
*ka
= &t
->sighand
->action
[0];
331 for (i
= _NSIG
; i
!= 0 ; i
--) {
332 if (force_default
|| ka
->sa
.sa_handler
!= SIG_IGN
)
333 ka
->sa
.sa_handler
= SIG_DFL
;
335 sigemptyset(&ka
->sa
.sa_mask
);
341 /* Notify the system that a driver wants to block all signals for this
342 * process, and wants to be notified if any signals at all were to be
343 * sent/acted upon. If the notifier routine returns non-zero, then the
344 * signal will be acted upon after all. If the notifier routine returns 0,
345 * then then signal will be blocked. Only one block per process is
346 * allowed. priv is a pointer to private data that the notifier routine
347 * can use to determine if the signal should be blocked or not. */
350 block_all_signals(int (*notifier
)(void *priv
), void *priv
, sigset_t
*mask
)
354 spin_lock_irqsave(¤t
->sighand
->siglock
, flags
);
355 current
->notifier_mask
= mask
;
356 current
->notifier_data
= priv
;
357 current
->notifier
= notifier
;
358 spin_unlock_irqrestore(¤t
->sighand
->siglock
, flags
);
361 /* Notify the system that blocking has ended. */
364 unblock_all_signals(void)
368 spin_lock_irqsave(¤t
->sighand
->siglock
, flags
);
369 current
->notifier
= NULL
;
370 current
->notifier_data
= NULL
;
372 spin_unlock_irqrestore(¤t
->sighand
->siglock
, flags
);
375 static int collect_signal(int sig
, struct sigpending
*list
, siginfo_t
*info
)
377 struct sigqueue
*q
, *first
= NULL
;
378 int still_pending
= 0;
380 if (unlikely(!sigismember(&list
->signal
, sig
)))
384 * Collect the siginfo appropriate to this signal. Check if
385 * there is another siginfo for the same signal.
387 list_for_each_entry(q
, &list
->list
, list
) {
388 if (q
->info
.si_signo
== sig
) {
397 list_del_init(&first
->list
);
398 copy_siginfo(info
, &first
->info
);
399 __sigqueue_free(first
);
401 sigdelset(&list
->signal
, sig
);
404 /* Ok, it wasn't in the queue. This must be
405 a fast-pathed signal or we must have been
406 out of queue space. So zero out the info.
408 sigdelset(&list
->signal
, sig
);
409 info
->si_signo
= sig
;
418 static int __dequeue_signal(struct sigpending
*pending
, sigset_t
*mask
,
423 sig
= next_signal(pending
, mask
);
425 if (current
->notifier
) {
426 if (sigismember(current
->notifier_mask
, sig
)) {
427 if (!(current
->notifier
)(current
->notifier_data
)) {
428 clear_thread_flag(TIF_SIGPENDING
);
434 if (!collect_signal(sig
, pending
, info
))
444 * Dequeue a signal and return the element to the caller, which is
445 * expected to free it.
447 * All callers have to hold the siglock.
449 int dequeue_signal(struct task_struct
*tsk
, sigset_t
*mask
, siginfo_t
*info
)
451 int signr
= __dequeue_signal(&tsk
->pending
, mask
, info
);
453 signr
= __dequeue_signal(&tsk
->signal
->shared_pending
,
455 if (signr
&& unlikely(sig_kernel_stop(signr
))) {
457 * Set a marker that we have dequeued a stop signal. Our
458 * caller might release the siglock and then the pending
459 * stop signal it is about to process is no longer in the
460 * pending bitmasks, but must still be cleared by a SIGCONT
461 * (and overruled by a SIGKILL). So those cases clear this
462 * shared flag after we've set it. Note that this flag may
463 * remain set after the signal we return is ignored or
464 * handled. That doesn't matter because its only purpose
465 * is to alert stop-signal processing code when another
466 * processor has come along and cleared the flag.
468 if (!(tsk
->signal
->flags
& SIGNAL_GROUP_EXIT
))
469 tsk
->signal
->flags
|= SIGNAL_STOP_DEQUEUED
;
472 ((info
->si_code
& __SI_MASK
) == __SI_TIMER
) &&
473 info
->si_sys_private
){
475 * Release the siglock to ensure proper locking order
476 * of timer locks outside of siglocks. Note, we leave
477 * irqs disabled here, since the posix-timers code is
478 * about to disable them again anyway.
480 spin_unlock(&tsk
->sighand
->siglock
);
481 do_schedule_next_timer(info
);
482 spin_lock(&tsk
->sighand
->siglock
);
488 * Tell a process that it has a new active signal..
490 * NOTE! we rely on the previous spin_lock to
491 * lock interrupts for us! We can only be called with
492 * "siglock" held, and the local interrupt must
493 * have been disabled when that got acquired!
495 * No need to set need_resched since signal event passing
496 * goes through ->blocked
498 void signal_wake_up(struct task_struct
*t
, int resume
)
502 set_tsk_thread_flag(t
, TIF_SIGPENDING
);
505 * For SIGKILL, we want to wake it up in the stopped/traced case.
506 * We don't check t->state here because there is a race with it
507 * executing another processor and just now entering stopped state.
508 * By using wake_up_state, we ensure the process will wake up and
509 * handle its death signal.
511 mask
= TASK_INTERRUPTIBLE
;
513 mask
|= TASK_STOPPED
| TASK_TRACED
;
514 if (!wake_up_state(t
, mask
))
519 * Remove signals in mask from the pending set and queue.
520 * Returns 1 if any signals were found.
522 * All callers must be holding the siglock.
524 * This version takes a sigset mask and looks at all signals,
525 * not just those in the first mask word.
527 static int rm_from_queue_full(sigset_t
*mask
, struct sigpending
*s
)
529 struct sigqueue
*q
, *n
;
532 sigandsets(&m
, mask
, &s
->signal
);
533 if (sigisemptyset(&m
))
536 signandsets(&s
->signal
, &s
->signal
, mask
);
537 list_for_each_entry_safe(q
, n
, &s
->list
, list
) {
538 if (sigismember(mask
, q
->info
.si_signo
)) {
539 list_del_init(&q
->list
);
546 * Remove signals in mask from the pending set and queue.
547 * Returns 1 if any signals were found.
549 * All callers must be holding the siglock.
551 static int rm_from_queue(unsigned long mask
, struct sigpending
*s
)
553 struct sigqueue
*q
, *n
;
555 if (!sigtestsetmask(&s
->signal
, mask
))
558 sigdelsetmask(&s
->signal
, mask
);
559 list_for_each_entry_safe(q
, n
, &s
->list
, list
) {
560 if (q
->info
.si_signo
< SIGRTMIN
&&
561 (mask
& sigmask(q
->info
.si_signo
))) {
562 list_del_init(&q
->list
);
570 * Bad permissions for sending the signal
572 static int check_kill_permission(int sig
, struct siginfo
*info
,
573 struct task_struct
*t
)
576 if (!valid_signal(sig
))
579 if ((info
== SEND_SIG_NOINFO
|| (!is_si_special(info
) && SI_FROMUSER(info
)))
580 && ((sig
!= SIGCONT
) ||
581 (current
->signal
->session
!= t
->signal
->session
))
582 && (current
->euid
^ t
->suid
) && (current
->euid
^ t
->uid
)
583 && (current
->uid
^ t
->suid
) && (current
->uid
^ t
->uid
)
584 && !capable(CAP_KILL
))
587 error
= security_task_kill(t
, info
, sig
);
589 audit_signal_info(sig
, t
); /* Let audit system see the signal */
594 static void do_notify_parent_cldstop(struct task_struct
*tsk
, int why
);
597 * Handle magic process-wide effects of stop/continue signals.
598 * Unlike the signal actions, these happen immediately at signal-generation
599 * time regardless of blocking, ignoring, or handling. This does the
600 * actual continuing for SIGCONT, but not the actual stopping for stop
601 * signals. The process stop is done as a signal action for SIG_DFL.
603 static void handle_stop_signal(int sig
, struct task_struct
*p
)
605 struct task_struct
*t
;
607 if (p
->signal
->flags
& SIGNAL_GROUP_EXIT
)
609 * The process is in the middle of dying already.
613 if (sig_kernel_stop(sig
)) {
615 * This is a stop signal. Remove SIGCONT from all queues.
617 rm_from_queue(sigmask(SIGCONT
), &p
->signal
->shared_pending
);
620 rm_from_queue(sigmask(SIGCONT
), &t
->pending
);
623 } else if (sig
== SIGCONT
) {
625 * Remove all stop signals from all queues,
626 * and wake all threads.
628 if (unlikely(p
->signal
->group_stop_count
> 0)) {
630 * There was a group stop in progress. We'll
631 * pretend it finished before we got here. We are
632 * obliged to report it to the parent: if the
633 * SIGSTOP happened "after" this SIGCONT, then it
634 * would have cleared this pending SIGCONT. If it
635 * happened "before" this SIGCONT, then the parent
636 * got the SIGCHLD about the stop finishing before
637 * the continue happened. We do the notification
638 * now, and it's as if the stop had finished and
639 * the SIGCHLD was pending on entry to this kill.
641 p
->signal
->group_stop_count
= 0;
642 p
->signal
->flags
= SIGNAL_STOP_CONTINUED
;
643 spin_unlock(&p
->sighand
->siglock
);
644 do_notify_parent_cldstop(p
, CLD_STOPPED
);
645 spin_lock(&p
->sighand
->siglock
);
647 rm_from_queue(SIG_KERNEL_STOP_MASK
, &p
->signal
->shared_pending
);
651 rm_from_queue(SIG_KERNEL_STOP_MASK
, &t
->pending
);
654 * If there is a handler for SIGCONT, we must make
655 * sure that no thread returns to user mode before
656 * we post the signal, in case it was the only
657 * thread eligible to run the signal handler--then
658 * it must not do anything between resuming and
659 * running the handler. With the TIF_SIGPENDING
660 * flag set, the thread will pause and acquire the
661 * siglock that we hold now and until we've queued
662 * the pending signal.
664 * Wake up the stopped thread _after_ setting
667 state
= TASK_STOPPED
;
668 if (sig_user_defined(t
, SIGCONT
) && !sigismember(&t
->blocked
, SIGCONT
)) {
669 set_tsk_thread_flag(t
, TIF_SIGPENDING
);
670 state
|= TASK_INTERRUPTIBLE
;
672 wake_up_state(t
, state
);
677 if (p
->signal
->flags
& SIGNAL_STOP_STOPPED
) {
679 * We were in fact stopped, and are now continued.
680 * Notify the parent with CLD_CONTINUED.
682 p
->signal
->flags
= SIGNAL_STOP_CONTINUED
;
683 p
->signal
->group_exit_code
= 0;
684 spin_unlock(&p
->sighand
->siglock
);
685 do_notify_parent_cldstop(p
, CLD_CONTINUED
);
686 spin_lock(&p
->sighand
->siglock
);
689 * We are not stopped, but there could be a stop
690 * signal in the middle of being processed after
691 * being removed from the queue. Clear that too.
693 p
->signal
->flags
= 0;
695 } else if (sig
== SIGKILL
) {
697 * Make sure that any pending stop signal already dequeued
698 * is undone by the wakeup for SIGKILL.
700 p
->signal
->flags
= 0;
704 static int send_signal(int sig
, struct siginfo
*info
, struct task_struct
*t
,
705 struct sigpending
*signals
)
707 struct sigqueue
* q
= NULL
;
711 * fast-pathed signals for kernel-internal things like SIGSTOP
714 if (info
== SEND_SIG_FORCED
)
717 /* Real-time signals must be queued if sent by sigqueue, or
718 some other real-time mechanism. It is implementation
719 defined whether kill() does so. We attempt to do so, on
720 the principle of least surprise, but since kill is not
721 allowed to fail with EAGAIN when low on memory we just
722 make sure at least one signal gets delivered and don't
723 pass on the info struct. */
725 q
= __sigqueue_alloc(t
, GFP_ATOMIC
, (sig
< SIGRTMIN
&&
726 (is_si_special(info
) ||
727 info
->si_code
>= 0)));
729 list_add_tail(&q
->list
, &signals
->list
);
730 switch ((unsigned long) info
) {
731 case (unsigned long) SEND_SIG_NOINFO
:
732 q
->info
.si_signo
= sig
;
733 q
->info
.si_errno
= 0;
734 q
->info
.si_code
= SI_USER
;
735 q
->info
.si_pid
= current
->pid
;
736 q
->info
.si_uid
= current
->uid
;
738 case (unsigned long) SEND_SIG_PRIV
:
739 q
->info
.si_signo
= sig
;
740 q
->info
.si_errno
= 0;
741 q
->info
.si_code
= SI_KERNEL
;
746 copy_siginfo(&q
->info
, info
);
749 } else if (!is_si_special(info
)) {
750 if (sig
>= SIGRTMIN
&& info
->si_code
!= SI_USER
)
752 * Queue overflow, abort. We may abort if the signal was rt
753 * and sent by user using something other than kill().
759 sigaddset(&signals
->signal
, sig
);
763 #define LEGACY_QUEUE(sigptr, sig) \
764 (((sig) < SIGRTMIN) && sigismember(&(sigptr)->signal, (sig)))
768 specific_send_sig_info(int sig
, struct siginfo
*info
, struct task_struct
*t
)
772 BUG_ON(!irqs_disabled());
773 assert_spin_locked(&t
->sighand
->siglock
);
775 /* Short-circuit ignored signals. */
776 if (sig_ignored(t
, sig
))
779 /* Support queueing exactly one non-rt signal, so that we
780 can get more detailed information about the cause of
782 if (LEGACY_QUEUE(&t
->pending
, sig
))
785 ret
= send_signal(sig
, info
, t
, &t
->pending
);
786 if (!ret
&& !sigismember(&t
->blocked
, sig
))
787 signal_wake_up(t
, sig
== SIGKILL
);
793 * Force a signal that the process can't ignore: if necessary
794 * we unblock the signal and change any SIG_IGN to SIG_DFL.
798 force_sig_info(int sig
, struct siginfo
*info
, struct task_struct
*t
)
800 unsigned long int flags
;
803 spin_lock_irqsave(&t
->sighand
->siglock
, flags
);
804 if (t
->sighand
->action
[sig
-1].sa
.sa_handler
== SIG_IGN
) {
805 t
->sighand
->action
[sig
-1].sa
.sa_handler
= SIG_DFL
;
807 if (sigismember(&t
->blocked
, sig
)) {
808 sigdelset(&t
->blocked
, sig
);
810 recalc_sigpending_tsk(t
);
811 ret
= specific_send_sig_info(sig
, info
, t
);
812 spin_unlock_irqrestore(&t
->sighand
->siglock
, flags
);
818 force_sig_specific(int sig
, struct task_struct
*t
)
820 force_sig_info(sig
, SEND_SIG_FORCED
, t
);
824 * Test if P wants to take SIG. After we've checked all threads with this,
825 * it's equivalent to finding no threads not blocking SIG. Any threads not
826 * blocking SIG were ruled out because they are not running and already
827 * have pending signals. Such threads will dequeue from the shared queue
828 * as soon as they're available, so putting the signal on the shared queue
829 * will be equivalent to sending it to one such thread.
831 static inline int wants_signal(int sig
, struct task_struct
*p
)
833 if (sigismember(&p
->blocked
, sig
))
835 if (p
->flags
& PF_EXITING
)
839 if (p
->state
& (TASK_STOPPED
| TASK_TRACED
))
841 return task_curr(p
) || !signal_pending(p
);
845 __group_complete_signal(int sig
, struct task_struct
*p
)
847 struct task_struct
*t
;
850 * Now find a thread we can wake up to take the signal off the queue.
852 * If the main thread wants the signal, it gets first crack.
853 * Probably the least surprising to the average bear.
855 if (wants_signal(sig
, p
))
857 else if (thread_group_empty(p
))
859 * There is just one thread and it does not need to be woken.
860 * It will dequeue unblocked signals before it runs again.
865 * Otherwise try to find a suitable thread.
867 t
= p
->signal
->curr_target
;
869 /* restart balancing at this thread */
870 t
= p
->signal
->curr_target
= p
;
872 while (!wants_signal(sig
, t
)) {
874 if (t
== p
->signal
->curr_target
)
876 * No thread needs to be woken.
877 * Any eligible threads will see
878 * the signal in the queue soon.
882 p
->signal
->curr_target
= t
;
886 * Found a killable thread. If the signal will be fatal,
887 * then start taking the whole group down immediately.
889 if (sig_fatal(p
, sig
) && !(p
->signal
->flags
& SIGNAL_GROUP_EXIT
) &&
890 !sigismember(&t
->real_blocked
, sig
) &&
891 (sig
== SIGKILL
|| !(t
->ptrace
& PT_PTRACED
))) {
893 * This signal will be fatal to the whole group.
895 if (!sig_kernel_coredump(sig
)) {
897 * Start a group exit and wake everybody up.
898 * This way we don't have other threads
899 * running and doing things after a slower
900 * thread has the fatal signal pending.
902 p
->signal
->flags
= SIGNAL_GROUP_EXIT
;
903 p
->signal
->group_exit_code
= sig
;
904 p
->signal
->group_stop_count
= 0;
907 sigaddset(&t
->pending
.signal
, SIGKILL
);
908 signal_wake_up(t
, 1);
915 * There will be a core dump. We make all threads other
916 * than the chosen one go into a group stop so that nothing
917 * happens until it gets scheduled, takes the signal off
918 * the shared queue, and does the core dump. This is a
919 * little more complicated than strictly necessary, but it
920 * keeps the signal state that winds up in the core dump
921 * unchanged from the death state, e.g. which thread had
922 * the core-dump signal unblocked.
924 rm_from_queue(SIG_KERNEL_STOP_MASK
, &t
->pending
);
925 rm_from_queue(SIG_KERNEL_STOP_MASK
, &p
->signal
->shared_pending
);
926 p
->signal
->group_stop_count
= 0;
927 p
->signal
->group_exit_task
= t
;
930 p
->signal
->group_stop_count
++;
931 signal_wake_up(t
, 0);
934 wake_up_process(p
->signal
->group_exit_task
);
939 * The signal is already in the shared-pending queue.
940 * Tell the chosen thread to wake up and dequeue it.
942 signal_wake_up(t
, sig
== SIGKILL
);
947 __group_send_sig_info(int sig
, struct siginfo
*info
, struct task_struct
*p
)
951 assert_spin_locked(&p
->sighand
->siglock
);
952 handle_stop_signal(sig
, p
);
954 /* Short-circuit ignored signals. */
955 if (sig_ignored(p
, sig
))
958 if (LEGACY_QUEUE(&p
->signal
->shared_pending
, sig
))
959 /* This is a non-RT signal and we already have one queued. */
963 * Put this signal on the shared-pending queue, or fail with EAGAIN.
964 * We always use the shared queue for process-wide signals,
965 * to avoid several races.
967 ret
= send_signal(sig
, info
, p
, &p
->signal
->shared_pending
);
971 __group_complete_signal(sig
, p
);
976 * Nuke all other threads in the group.
978 void zap_other_threads(struct task_struct
*p
)
980 struct task_struct
*t
;
982 p
->signal
->flags
= SIGNAL_GROUP_EXIT
;
983 p
->signal
->group_stop_count
= 0;
985 if (thread_group_empty(p
))
988 for (t
= next_thread(p
); t
!= p
; t
= next_thread(t
)) {
990 * Don't bother with already dead threads
996 * We don't want to notify the parent, since we are
997 * killed as part of a thread group due to another
998 * thread doing an execve() or similar. So set the
999 * exit signal to -1 to allow immediate reaping of
1000 * the process. But don't detach the thread group
1003 if (t
!= p
->group_leader
)
1004 t
->exit_signal
= -1;
1006 /* SIGKILL will be handled before any pending SIGSTOP */
1007 sigaddset(&t
->pending
.signal
, SIGKILL
);
1008 signal_wake_up(t
, 1);
1013 * Must be called under rcu_read_lock() or with tasklist_lock read-held.
1015 struct sighand_struct
*lock_task_sighand(struct task_struct
*tsk
, unsigned long *flags
)
1017 struct sighand_struct
*sighand
;
1020 sighand
= rcu_dereference(tsk
->sighand
);
1021 if (unlikely(sighand
== NULL
))
1024 spin_lock_irqsave(&sighand
->siglock
, *flags
);
1025 if (likely(sighand
== tsk
->sighand
))
1027 spin_unlock_irqrestore(&sighand
->siglock
, *flags
);
1033 int group_send_sig_info(int sig
, struct siginfo
*info
, struct task_struct
*p
)
1035 unsigned long flags
;
1038 ret
= check_kill_permission(sig
, info
, p
);
1042 if (lock_task_sighand(p
, &flags
)) {
1043 ret
= __group_send_sig_info(sig
, info
, p
);
1044 unlock_task_sighand(p
, &flags
);
1052 * kill_pg_info() sends a signal to a process group: this is what the tty
1053 * control characters do (^C, ^Z etc)
1056 int __kill_pg_info(int sig
, struct siginfo
*info
, pid_t pgrp
)
1058 struct task_struct
*p
= NULL
;
1059 int retval
, success
;
1066 do_each_task_pid(pgrp
, PIDTYPE_PGID
, p
) {
1067 int err
= group_send_sig_info(sig
, info
, p
);
1070 } while_each_task_pid(pgrp
, PIDTYPE_PGID
, p
);
1071 return success
? 0 : retval
;
1075 kill_pg_info(int sig
, struct siginfo
*info
, pid_t pgrp
)
1079 read_lock(&tasklist_lock
);
1080 retval
= __kill_pg_info(sig
, info
, pgrp
);
1081 read_unlock(&tasklist_lock
);
1087 kill_proc_info(int sig
, struct siginfo
*info
, pid_t pid
)
1090 int acquired_tasklist_lock
= 0;
1091 struct task_struct
*p
;
1094 if (unlikely(sig_needs_tasklist(sig
))) {
1095 read_lock(&tasklist_lock
);
1096 acquired_tasklist_lock
= 1;
1098 p
= find_task_by_pid(pid
);
1101 error
= group_send_sig_info(sig
, info
, p
);
1102 if (unlikely(acquired_tasklist_lock
))
1103 read_unlock(&tasklist_lock
);
1108 /* like kill_proc_info(), but doesn't use uid/euid of "current" */
1109 int kill_proc_info_as_uid(int sig
, struct siginfo
*info
, pid_t pid
,
1110 uid_t uid
, uid_t euid
)
1113 struct task_struct
*p
;
1115 if (!valid_signal(sig
))
1118 read_lock(&tasklist_lock
);
1119 p
= find_task_by_pid(pid
);
1124 if ((info
== SEND_SIG_NOINFO
|| (!is_si_special(info
) && SI_FROMUSER(info
)))
1125 && (euid
!= p
->suid
) && (euid
!= p
->uid
)
1126 && (uid
!= p
->suid
) && (uid
!= p
->uid
)) {
1130 if (sig
&& p
->sighand
) {
1131 unsigned long flags
;
1132 spin_lock_irqsave(&p
->sighand
->siglock
, flags
);
1133 ret
= __group_send_sig_info(sig
, info
, p
);
1134 spin_unlock_irqrestore(&p
->sighand
->siglock
, flags
);
1137 read_unlock(&tasklist_lock
);
1140 EXPORT_SYMBOL_GPL(kill_proc_info_as_uid
);
1143 * kill_something_info() interprets pid in interesting ways just like kill(2).
1145 * POSIX specifies that kill(-1,sig) is unspecified, but what we have
1146 * is probably wrong. Should make it like BSD or SYSV.
1149 static int kill_something_info(int sig
, struct siginfo
*info
, int pid
)
1152 return kill_pg_info(sig
, info
, process_group(current
));
1153 } else if (pid
== -1) {
1154 int retval
= 0, count
= 0;
1155 struct task_struct
* p
;
1157 read_lock(&tasklist_lock
);
1158 for_each_process(p
) {
1159 if (p
->pid
> 1 && p
->tgid
!= current
->tgid
) {
1160 int err
= group_send_sig_info(sig
, info
, p
);
1166 read_unlock(&tasklist_lock
);
1167 return count
? retval
: -ESRCH
;
1168 } else if (pid
< 0) {
1169 return kill_pg_info(sig
, info
, -pid
);
1171 return kill_proc_info(sig
, info
, pid
);
1176 * These are for backward compatibility with the rest of the kernel source.
1180 * These two are the most common entry points. They send a signal
1181 * just to the specific thread.
1184 send_sig_info(int sig
, struct siginfo
*info
, struct task_struct
*p
)
1187 unsigned long flags
;
1190 * Make sure legacy kernel users don't send in bad values
1191 * (normal paths check this in check_kill_permission).
1193 if (!valid_signal(sig
))
1197 * We need the tasklist lock even for the specific
1198 * thread case (when we don't need to follow the group
1199 * lists) in order to avoid races with "p->sighand"
1200 * going away or changing from under us.
1202 read_lock(&tasklist_lock
);
1203 spin_lock_irqsave(&p
->sighand
->siglock
, flags
);
1204 ret
= specific_send_sig_info(sig
, info
, p
);
1205 spin_unlock_irqrestore(&p
->sighand
->siglock
, flags
);
1206 read_unlock(&tasklist_lock
);
1210 #define __si_special(priv) \
1211 ((priv) ? SEND_SIG_PRIV : SEND_SIG_NOINFO)
1214 send_sig(int sig
, struct task_struct
*p
, int priv
)
1216 return send_sig_info(sig
, __si_special(priv
), p
);
1220 * This is the entry point for "process-wide" signals.
1221 * They will go to an appropriate thread in the thread group.
1224 send_group_sig_info(int sig
, struct siginfo
*info
, struct task_struct
*p
)
1227 read_lock(&tasklist_lock
);
1228 ret
= group_send_sig_info(sig
, info
, p
);
1229 read_unlock(&tasklist_lock
);
1234 force_sig(int sig
, struct task_struct
*p
)
1236 force_sig_info(sig
, SEND_SIG_PRIV
, p
);
1240 * When things go south during signal handling, we
1241 * will force a SIGSEGV. And if the signal that caused
1242 * the problem was already a SIGSEGV, we'll want to
1243 * make sure we don't even try to deliver the signal..
1246 force_sigsegv(int sig
, struct task_struct
*p
)
1248 if (sig
== SIGSEGV
) {
1249 unsigned long flags
;
1250 spin_lock_irqsave(&p
->sighand
->siglock
, flags
);
1251 p
->sighand
->action
[sig
- 1].sa
.sa_handler
= SIG_DFL
;
1252 spin_unlock_irqrestore(&p
->sighand
->siglock
, flags
);
1254 force_sig(SIGSEGV
, p
);
1259 kill_pg(pid_t pgrp
, int sig
, int priv
)
1261 return kill_pg_info(sig
, __si_special(priv
), pgrp
);
1265 kill_proc(pid_t pid
, int sig
, int priv
)
1267 return kill_proc_info(sig
, __si_special(priv
), pid
);
1271 * These functions support sending signals using preallocated sigqueue
1272 * structures. This is needed "because realtime applications cannot
1273 * afford to lose notifications of asynchronous events, like timer
1274 * expirations or I/O completions". In the case of Posix Timers
1275 * we allocate the sigqueue structure from the timer_create. If this
1276 * allocation fails we are able to report the failure to the application
1277 * with an EAGAIN error.
1280 struct sigqueue
*sigqueue_alloc(void)
1284 if ((q
= __sigqueue_alloc(current
, GFP_KERNEL
, 0)))
1285 q
->flags
|= SIGQUEUE_PREALLOC
;
1289 void sigqueue_free(struct sigqueue
*q
)
1291 unsigned long flags
;
1292 BUG_ON(!(q
->flags
& SIGQUEUE_PREALLOC
));
1294 * If the signal is still pending remove it from the
1297 if (unlikely(!list_empty(&q
->list
))) {
1298 spinlock_t
*lock
= ¤t
->sighand
->siglock
;
1299 read_lock(&tasklist_lock
);
1300 spin_lock_irqsave(lock
, flags
);
1301 if (!list_empty(&q
->list
))
1302 list_del_init(&q
->list
);
1303 spin_unlock_irqrestore(lock
, flags
);
1304 read_unlock(&tasklist_lock
);
1306 q
->flags
&= ~SIGQUEUE_PREALLOC
;
1310 int send_sigqueue(int sig
, struct sigqueue
*q
, struct task_struct
*p
)
1312 unsigned long flags
;
1315 BUG_ON(!(q
->flags
& SIGQUEUE_PREALLOC
));
1318 * The rcu based delayed sighand destroy makes it possible to
1319 * run this without tasklist lock held. The task struct itself
1320 * cannot go away as create_timer did get_task_struct().
1322 * We return -1, when the task is marked exiting, so
1323 * posix_timer_event can redirect it to the group leader
1327 if (!likely(lock_task_sighand(p
, &flags
))) {
1332 if (unlikely(!list_empty(&q
->list
))) {
1334 * If an SI_TIMER entry is already queue just increment
1335 * the overrun count.
1337 BUG_ON(q
->info
.si_code
!= SI_TIMER
);
1338 q
->info
.si_overrun
++;
1341 /* Short-circuit ignored signals. */
1342 if (sig_ignored(p
, sig
)) {
1347 list_add_tail(&q
->list
, &p
->pending
.list
);
1348 sigaddset(&p
->pending
.signal
, sig
);
1349 if (!sigismember(&p
->blocked
, sig
))
1350 signal_wake_up(p
, sig
== SIGKILL
);
1353 unlock_task_sighand(p
, &flags
);
1361 send_group_sigqueue(int sig
, struct sigqueue
*q
, struct task_struct
*p
)
1363 unsigned long flags
;
1366 BUG_ON(!(q
->flags
& SIGQUEUE_PREALLOC
));
1368 read_lock(&tasklist_lock
);
1369 /* Since it_lock is held, p->sighand cannot be NULL. */
1370 spin_lock_irqsave(&p
->sighand
->siglock
, flags
);
1371 handle_stop_signal(sig
, p
);
1373 /* Short-circuit ignored signals. */
1374 if (sig_ignored(p
, sig
)) {
1379 if (unlikely(!list_empty(&q
->list
))) {
1381 * If an SI_TIMER entry is already queue just increment
1382 * the overrun count. Other uses should not try to
1383 * send the signal multiple times.
1385 BUG_ON(q
->info
.si_code
!= SI_TIMER
);
1386 q
->info
.si_overrun
++;
1391 * Put this signal on the shared-pending queue.
1392 * We always use the shared queue for process-wide signals,
1393 * to avoid several races.
1395 list_add_tail(&q
->list
, &p
->signal
->shared_pending
.list
);
1396 sigaddset(&p
->signal
->shared_pending
.signal
, sig
);
1398 __group_complete_signal(sig
, p
);
1400 spin_unlock_irqrestore(&p
->sighand
->siglock
, flags
);
1401 read_unlock(&tasklist_lock
);
1406 * Wake up any threads in the parent blocked in wait* syscalls.
1408 static inline void __wake_up_parent(struct task_struct
*p
,
1409 struct task_struct
*parent
)
1411 wake_up_interruptible_sync(&parent
->signal
->wait_chldexit
);
1415 * Let a parent know about the death of a child.
1416 * For a stopped/continued status change, use do_notify_parent_cldstop instead.
1419 void do_notify_parent(struct task_struct
*tsk
, int sig
)
1421 struct siginfo info
;
1422 unsigned long flags
;
1423 struct sighand_struct
*psig
;
1427 /* do_notify_parent_cldstop should have been called instead. */
1428 BUG_ON(tsk
->state
& (TASK_STOPPED
|TASK_TRACED
));
1430 BUG_ON(!tsk
->ptrace
&&
1431 (tsk
->group_leader
!= tsk
|| !thread_group_empty(tsk
)));
1433 info
.si_signo
= sig
;
1435 info
.si_pid
= tsk
->pid
;
1436 info
.si_uid
= tsk
->uid
;
1438 /* FIXME: find out whether or not this is supposed to be c*time. */
1439 info
.si_utime
= cputime_to_jiffies(cputime_add(tsk
->utime
,
1440 tsk
->signal
->utime
));
1441 info
.si_stime
= cputime_to_jiffies(cputime_add(tsk
->stime
,
1442 tsk
->signal
->stime
));
1444 info
.si_status
= tsk
->exit_code
& 0x7f;
1445 if (tsk
->exit_code
& 0x80)
1446 info
.si_code
= CLD_DUMPED
;
1447 else if (tsk
->exit_code
& 0x7f)
1448 info
.si_code
= CLD_KILLED
;
1450 info
.si_code
= CLD_EXITED
;
1451 info
.si_status
= tsk
->exit_code
>> 8;
1454 psig
= tsk
->parent
->sighand
;
1455 spin_lock_irqsave(&psig
->siglock
, flags
);
1456 if (!tsk
->ptrace
&& sig
== SIGCHLD
&&
1457 (psig
->action
[SIGCHLD
-1].sa
.sa_handler
== SIG_IGN
||
1458 (psig
->action
[SIGCHLD
-1].sa
.sa_flags
& SA_NOCLDWAIT
))) {
1460 * We are exiting and our parent doesn't care. POSIX.1
1461 * defines special semantics for setting SIGCHLD to SIG_IGN
1462 * or setting the SA_NOCLDWAIT flag: we should be reaped
1463 * automatically and not left for our parent's wait4 call.
1464 * Rather than having the parent do it as a magic kind of
1465 * signal handler, we just set this to tell do_exit that we
1466 * can be cleaned up without becoming a zombie. Note that
1467 * we still call __wake_up_parent in this case, because a
1468 * blocked sys_wait4 might now return -ECHILD.
1470 * Whether we send SIGCHLD or not for SA_NOCLDWAIT
1471 * is implementation-defined: we do (if you don't want
1472 * it, just use SIG_IGN instead).
1474 tsk
->exit_signal
= -1;
1475 if (psig
->action
[SIGCHLD
-1].sa
.sa_handler
== SIG_IGN
)
1478 if (valid_signal(sig
) && sig
> 0)
1479 __group_send_sig_info(sig
, &info
, tsk
->parent
);
1480 __wake_up_parent(tsk
, tsk
->parent
);
1481 spin_unlock_irqrestore(&psig
->siglock
, flags
);
1484 static void do_notify_parent_cldstop(struct task_struct
*tsk
, int why
)
1486 struct siginfo info
;
1487 unsigned long flags
;
1488 struct task_struct
*parent
;
1489 struct sighand_struct
*sighand
;
1491 if (tsk
->ptrace
& PT_PTRACED
)
1492 parent
= tsk
->parent
;
1494 tsk
= tsk
->group_leader
;
1495 parent
= tsk
->real_parent
;
1498 info
.si_signo
= SIGCHLD
;
1500 info
.si_pid
= tsk
->pid
;
1501 info
.si_uid
= tsk
->uid
;
1503 /* FIXME: find out whether or not this is supposed to be c*time. */
1504 info
.si_utime
= cputime_to_jiffies(tsk
->utime
);
1505 info
.si_stime
= cputime_to_jiffies(tsk
->stime
);
1510 info
.si_status
= SIGCONT
;
1513 info
.si_status
= tsk
->signal
->group_exit_code
& 0x7f;
1516 info
.si_status
= tsk
->exit_code
& 0x7f;
1522 sighand
= parent
->sighand
;
1523 spin_lock_irqsave(&sighand
->siglock
, flags
);
1524 if (sighand
->action
[SIGCHLD
-1].sa
.sa_handler
!= SIG_IGN
&&
1525 !(sighand
->action
[SIGCHLD
-1].sa
.sa_flags
& SA_NOCLDSTOP
))
1526 __group_send_sig_info(SIGCHLD
, &info
, parent
);
1528 * Even if SIGCHLD is not generated, we must wake up wait4 calls.
1530 __wake_up_parent(tsk
, parent
);
1531 spin_unlock_irqrestore(&sighand
->siglock
, flags
);
1535 * This must be called with current->sighand->siglock held.
1537 * This should be the path for all ptrace stops.
1538 * We always set current->last_siginfo while stopped here.
1539 * That makes it a way to test a stopped process for
1540 * being ptrace-stopped vs being job-control-stopped.
1542 * If we actually decide not to stop at all because the tracer is gone,
1543 * we leave nostop_code in current->exit_code.
1545 static void ptrace_stop(int exit_code
, int nostop_code
, siginfo_t
*info
)
1548 * If there is a group stop in progress,
1549 * we must participate in the bookkeeping.
1551 if (current
->signal
->group_stop_count
> 0)
1552 --current
->signal
->group_stop_count
;
1554 current
->last_siginfo
= info
;
1555 current
->exit_code
= exit_code
;
1557 /* Let the debugger run. */
1558 set_current_state(TASK_TRACED
);
1559 spin_unlock_irq(¤t
->sighand
->siglock
);
1561 read_lock(&tasklist_lock
);
1562 if (likely(current
->ptrace
& PT_PTRACED
) &&
1563 likely(current
->parent
!= current
->real_parent
||
1564 !(current
->ptrace
& PT_ATTACHED
)) &&
1565 (likely(current
->parent
->signal
!= current
->signal
) ||
1566 !unlikely(current
->signal
->flags
& SIGNAL_GROUP_EXIT
))) {
1567 do_notify_parent_cldstop(current
, CLD_TRAPPED
);
1568 read_unlock(&tasklist_lock
);
1572 * By the time we got the lock, our tracer went away.
1575 read_unlock(&tasklist_lock
);
1576 set_current_state(TASK_RUNNING
);
1577 current
->exit_code
= nostop_code
;
1581 * We are back. Now reacquire the siglock before touching
1582 * last_siginfo, so that we are sure to have synchronized with
1583 * any signal-sending on another CPU that wants to examine it.
1585 spin_lock_irq(¤t
->sighand
->siglock
);
1586 current
->last_siginfo
= NULL
;
1589 * Queued signals ignored us while we were stopped for tracing.
1590 * So check for any that we should take before resuming user mode.
1592 recalc_sigpending();
1595 void ptrace_notify(int exit_code
)
1599 BUG_ON((exit_code
& (0x7f | ~0xffff)) != SIGTRAP
);
1601 memset(&info
, 0, sizeof info
);
1602 info
.si_signo
= SIGTRAP
;
1603 info
.si_code
= exit_code
;
1604 info
.si_pid
= current
->pid
;
1605 info
.si_uid
= current
->uid
;
1607 /* Let the debugger run. */
1608 spin_lock_irq(¤t
->sighand
->siglock
);
1609 ptrace_stop(exit_code
, 0, &info
);
1610 spin_unlock_irq(¤t
->sighand
->siglock
);
1614 finish_stop(int stop_count
)
1617 * If there are no other threads in the group, or if there is
1618 * a group stop in progress and we are the last to stop,
1619 * report to the parent. When ptraced, every thread reports itself.
1621 if (stop_count
== 0 || (current
->ptrace
& PT_PTRACED
)) {
1622 read_lock(&tasklist_lock
);
1623 do_notify_parent_cldstop(current
, CLD_STOPPED
);
1624 read_unlock(&tasklist_lock
);
1629 * Now we don't run again until continued.
1631 current
->exit_code
= 0;
1635 * This performs the stopping for SIGSTOP and other stop signals.
1636 * We have to stop all threads in the thread group.
1637 * Returns nonzero if we've actually stopped and released the siglock.
1638 * Returns zero if we didn't stop and still hold the siglock.
1640 static int do_signal_stop(int signr
)
1642 struct signal_struct
*sig
= current
->signal
;
1645 if (!likely(sig
->flags
& SIGNAL_STOP_DEQUEUED
))
1648 if (sig
->group_stop_count
> 0) {
1650 * There is a group stop in progress. We don't need to
1651 * start another one.
1653 stop_count
= --sig
->group_stop_count
;
1656 * There is no group stop already in progress.
1657 * We must initiate one now.
1659 struct task_struct
*t
;
1661 sig
->group_exit_code
= signr
;
1664 for (t
= next_thread(current
); t
!= current
; t
= next_thread(t
))
1666 * Setting state to TASK_STOPPED for a group
1667 * stop is always done with the siglock held,
1668 * so this check has no races.
1670 if (!t
->exit_state
&&
1671 !(t
->state
& (TASK_STOPPED
|TASK_TRACED
))) {
1673 signal_wake_up(t
, 0);
1675 sig
->group_stop_count
= stop_count
;
1678 if (stop_count
== 0)
1679 sig
->flags
= SIGNAL_STOP_STOPPED
;
1680 current
->exit_code
= sig
->group_exit_code
;
1681 __set_current_state(TASK_STOPPED
);
1683 spin_unlock_irq(¤t
->sighand
->siglock
);
1684 finish_stop(stop_count
);
1689 * Do appropriate magic when group_stop_count > 0.
1690 * We return nonzero if we stopped, after releasing the siglock.
1691 * We return zero if we still hold the siglock and should look
1692 * for another signal without checking group_stop_count again.
1694 static int handle_group_stop(void)
1698 if (current
->signal
->group_exit_task
== current
) {
1700 * Group stop is so we can do a core dump,
1701 * We are the initiating thread, so get on with it.
1703 current
->signal
->group_exit_task
= NULL
;
1707 if (current
->signal
->flags
& SIGNAL_GROUP_EXIT
)
1709 * Group stop is so another thread can do a core dump,
1710 * or else we are racing against a death signal.
1711 * Just punt the stop so we can get the next signal.
1716 * There is a group stop in progress. We stop
1717 * without any associated signal being in our queue.
1719 stop_count
= --current
->signal
->group_stop_count
;
1720 if (stop_count
== 0)
1721 current
->signal
->flags
= SIGNAL_STOP_STOPPED
;
1722 current
->exit_code
= current
->signal
->group_exit_code
;
1723 set_current_state(TASK_STOPPED
);
1724 spin_unlock_irq(¤t
->sighand
->siglock
);
1725 finish_stop(stop_count
);
1729 int get_signal_to_deliver(siginfo_t
*info
, struct k_sigaction
*return_ka
,
1730 struct pt_regs
*regs
, void *cookie
)
1732 sigset_t
*mask
= ¤t
->blocked
;
1738 spin_lock_irq(¤t
->sighand
->siglock
);
1740 struct k_sigaction
*ka
;
1742 if (unlikely(current
->signal
->group_stop_count
> 0) &&
1743 handle_group_stop())
1746 signr
= dequeue_signal(current
, mask
, info
);
1749 break; /* will return 0 */
1751 if ((current
->ptrace
& PT_PTRACED
) && signr
!= SIGKILL
) {
1752 ptrace_signal_deliver(regs
, cookie
);
1754 /* Let the debugger run. */
1755 ptrace_stop(signr
, signr
, info
);
1757 /* We're back. Did the debugger cancel the sig? */
1758 signr
= current
->exit_code
;
1762 current
->exit_code
= 0;
1764 /* Update the siginfo structure if the signal has
1765 changed. If the debugger wanted something
1766 specific in the siginfo structure then it should
1767 have updated *info via PTRACE_SETSIGINFO. */
1768 if (signr
!= info
->si_signo
) {
1769 info
->si_signo
= signr
;
1771 info
->si_code
= SI_USER
;
1772 info
->si_pid
= current
->parent
->pid
;
1773 info
->si_uid
= current
->parent
->uid
;
1776 /* If the (new) signal is now blocked, requeue it. */
1777 if (sigismember(¤t
->blocked
, signr
)) {
1778 specific_send_sig_info(signr
, info
, current
);
1783 ka
= ¤t
->sighand
->action
[signr
-1];
1784 if (ka
->sa
.sa_handler
== SIG_IGN
) /* Do nothing. */
1786 if (ka
->sa
.sa_handler
!= SIG_DFL
) {
1787 /* Run the handler. */
1790 if (ka
->sa
.sa_flags
& SA_ONESHOT
)
1791 ka
->sa
.sa_handler
= SIG_DFL
;
1793 break; /* will return non-zero "signr" value */
1797 * Now we are doing the default action for this signal.
1799 if (sig_kernel_ignore(signr
)) /* Default is nothing. */
1802 /* Init gets no signals it doesn't want. */
1803 if (current
== child_reaper
)
1806 if (sig_kernel_stop(signr
)) {
1808 * The default action is to stop all threads in
1809 * the thread group. The job control signals
1810 * do nothing in an orphaned pgrp, but SIGSTOP
1811 * always works. Note that siglock needs to be
1812 * dropped during the call to is_orphaned_pgrp()
1813 * because of lock ordering with tasklist_lock.
1814 * This allows an intervening SIGCONT to be posted.
1815 * We need to check for that and bail out if necessary.
1817 if (signr
!= SIGSTOP
) {
1818 spin_unlock_irq(¤t
->sighand
->siglock
);
1820 /* signals can be posted during this window */
1822 if (is_orphaned_pgrp(process_group(current
)))
1825 spin_lock_irq(¤t
->sighand
->siglock
);
1828 if (likely(do_signal_stop(signr
))) {
1829 /* It released the siglock. */
1834 * We didn't actually stop, due to a race
1835 * with SIGCONT or something like that.
1840 spin_unlock_irq(¤t
->sighand
->siglock
);
1843 * Anything else is fatal, maybe with a core dump.
1845 current
->flags
|= PF_SIGNALED
;
1846 if (sig_kernel_coredump(signr
)) {
1848 * If it was able to dump core, this kills all
1849 * other threads in the group and synchronizes with
1850 * their demise. If we lost the race with another
1851 * thread getting here, it set group_exit_code
1852 * first and our do_group_exit call below will use
1853 * that value and ignore the one we pass it.
1855 do_coredump((long)signr
, signr
, regs
);
1859 * Death signals, no core dump.
1861 do_group_exit(signr
);
1864 spin_unlock_irq(¤t
->sighand
->siglock
);
1868 EXPORT_SYMBOL(recalc_sigpending
);
1869 EXPORT_SYMBOL_GPL(dequeue_signal
);
1870 EXPORT_SYMBOL(flush_signals
);
1871 EXPORT_SYMBOL(force_sig
);
1872 EXPORT_SYMBOL(kill_pg
);
1873 EXPORT_SYMBOL(kill_proc
);
1874 EXPORT_SYMBOL(ptrace_notify
);
1875 EXPORT_SYMBOL(send_sig
);
1876 EXPORT_SYMBOL(send_sig_info
);
1877 EXPORT_SYMBOL(sigprocmask
);
1878 EXPORT_SYMBOL(block_all_signals
);
1879 EXPORT_SYMBOL(unblock_all_signals
);
1883 * System call entry points.
1886 asmlinkage
long sys_restart_syscall(void)
1888 struct restart_block
*restart
= ¤t_thread_info()->restart_block
;
1889 return restart
->fn(restart
);
1892 long do_no_restart_syscall(struct restart_block
*param
)
1898 * We don't need to get the kernel lock - this is all local to this
1899 * particular thread.. (and that's good, because this is _heavily_
1900 * used by various programs)
1904 * This is also useful for kernel threads that want to temporarily
1905 * (or permanently) block certain signals.
1907 * NOTE! Unlike the user-mode sys_sigprocmask(), the kernel
1908 * interface happily blocks "unblockable" signals like SIGKILL
1911 int sigprocmask(int how
, sigset_t
*set
, sigset_t
*oldset
)
1915 spin_lock_irq(¤t
->sighand
->siglock
);
1917 *oldset
= current
->blocked
;
1922 sigorsets(¤t
->blocked
, ¤t
->blocked
, set
);
1925 signandsets(¤t
->blocked
, ¤t
->blocked
, set
);
1928 current
->blocked
= *set
;
1933 recalc_sigpending();
1934 spin_unlock_irq(¤t
->sighand
->siglock
);
1940 sys_rt_sigprocmask(int how
, sigset_t __user
*set
, sigset_t __user
*oset
, size_t sigsetsize
)
1942 int error
= -EINVAL
;
1943 sigset_t old_set
, new_set
;
1945 /* XXX: Don't preclude handling different sized sigset_t's. */
1946 if (sigsetsize
!= sizeof(sigset_t
))
1951 if (copy_from_user(&new_set
, set
, sizeof(*set
)))
1953 sigdelsetmask(&new_set
, sigmask(SIGKILL
)|sigmask(SIGSTOP
));
1955 error
= sigprocmask(how
, &new_set
, &old_set
);
1961 spin_lock_irq(¤t
->sighand
->siglock
);
1962 old_set
= current
->blocked
;
1963 spin_unlock_irq(¤t
->sighand
->siglock
);
1967 if (copy_to_user(oset
, &old_set
, sizeof(*oset
)))
1975 long do_sigpending(void __user
*set
, unsigned long sigsetsize
)
1977 long error
= -EINVAL
;
1980 if (sigsetsize
> sizeof(sigset_t
))
1983 spin_lock_irq(¤t
->sighand
->siglock
);
1984 sigorsets(&pending
, ¤t
->pending
.signal
,
1985 ¤t
->signal
->shared_pending
.signal
);
1986 spin_unlock_irq(¤t
->sighand
->siglock
);
1988 /* Outside the lock because only this thread touches it. */
1989 sigandsets(&pending
, ¤t
->blocked
, &pending
);
1992 if (!copy_to_user(set
, &pending
, sigsetsize
))
2000 sys_rt_sigpending(sigset_t __user
*set
, size_t sigsetsize
)
2002 return do_sigpending(set
, sigsetsize
);
2005 #ifndef HAVE_ARCH_COPY_SIGINFO_TO_USER
2007 int copy_siginfo_to_user(siginfo_t __user
*to
, siginfo_t
*from
)
2011 if (!access_ok (VERIFY_WRITE
, to
, sizeof(siginfo_t
)))
2013 if (from
->si_code
< 0)
2014 return __copy_to_user(to
, from
, sizeof(siginfo_t
))
2017 * If you change siginfo_t structure, please be sure
2018 * this code is fixed accordingly.
2019 * It should never copy any pad contained in the structure
2020 * to avoid security leaks, but must copy the generic
2021 * 3 ints plus the relevant union member.
2023 err
= __put_user(from
->si_signo
, &to
->si_signo
);
2024 err
|= __put_user(from
->si_errno
, &to
->si_errno
);
2025 err
|= __put_user((short)from
->si_code
, &to
->si_code
);
2026 switch (from
->si_code
& __SI_MASK
) {
2028 err
|= __put_user(from
->si_pid
, &to
->si_pid
);
2029 err
|= __put_user(from
->si_uid
, &to
->si_uid
);
2032 err
|= __put_user(from
->si_tid
, &to
->si_tid
);
2033 err
|= __put_user(from
->si_overrun
, &to
->si_overrun
);
2034 err
|= __put_user(from
->si_ptr
, &to
->si_ptr
);
2037 err
|= __put_user(from
->si_band
, &to
->si_band
);
2038 err
|= __put_user(from
->si_fd
, &to
->si_fd
);
2041 err
|= __put_user(from
->si_addr
, &to
->si_addr
);
2042 #ifdef __ARCH_SI_TRAPNO
2043 err
|= __put_user(from
->si_trapno
, &to
->si_trapno
);
2047 err
|= __put_user(from
->si_pid
, &to
->si_pid
);
2048 err
|= __put_user(from
->si_uid
, &to
->si_uid
);
2049 err
|= __put_user(from
->si_status
, &to
->si_status
);
2050 err
|= __put_user(from
->si_utime
, &to
->si_utime
);
2051 err
|= __put_user(from
->si_stime
, &to
->si_stime
);
2053 case __SI_RT
: /* This is not generated by the kernel as of now. */
2054 case __SI_MESGQ
: /* But this is */
2055 err
|= __put_user(from
->si_pid
, &to
->si_pid
);
2056 err
|= __put_user(from
->si_uid
, &to
->si_uid
);
2057 err
|= __put_user(from
->si_ptr
, &to
->si_ptr
);
2059 default: /* this is just in case for now ... */
2060 err
|= __put_user(from
->si_pid
, &to
->si_pid
);
2061 err
|= __put_user(from
->si_uid
, &to
->si_uid
);
2070 sys_rt_sigtimedwait(const sigset_t __user
*uthese
,
2071 siginfo_t __user
*uinfo
,
2072 const struct timespec __user
*uts
,
2081 /* XXX: Don't preclude handling different sized sigset_t's. */
2082 if (sigsetsize
!= sizeof(sigset_t
))
2085 if (copy_from_user(&these
, uthese
, sizeof(these
)))
2089 * Invert the set of allowed signals to get those we
2092 sigdelsetmask(&these
, sigmask(SIGKILL
)|sigmask(SIGSTOP
));
2096 if (copy_from_user(&ts
, uts
, sizeof(ts
)))
2098 if (ts
.tv_nsec
>= 1000000000L || ts
.tv_nsec
< 0
2103 spin_lock_irq(¤t
->sighand
->siglock
);
2104 sig
= dequeue_signal(current
, &these
, &info
);
2106 timeout
= MAX_SCHEDULE_TIMEOUT
;
2108 timeout
= (timespec_to_jiffies(&ts
)
2109 + (ts
.tv_sec
|| ts
.tv_nsec
));
2112 /* None ready -- temporarily unblock those we're
2113 * interested while we are sleeping in so that we'll
2114 * be awakened when they arrive. */
2115 current
->real_blocked
= current
->blocked
;
2116 sigandsets(¤t
->blocked
, ¤t
->blocked
, &these
);
2117 recalc_sigpending();
2118 spin_unlock_irq(¤t
->sighand
->siglock
);
2120 timeout
= schedule_timeout_interruptible(timeout
);
2122 spin_lock_irq(¤t
->sighand
->siglock
);
2123 sig
= dequeue_signal(current
, &these
, &info
);
2124 current
->blocked
= current
->real_blocked
;
2125 siginitset(¤t
->real_blocked
, 0);
2126 recalc_sigpending();
2129 spin_unlock_irq(¤t
->sighand
->siglock
);
2134 if (copy_siginfo_to_user(uinfo
, &info
))
2147 sys_kill(int pid
, int sig
)
2149 struct siginfo info
;
2151 info
.si_signo
= sig
;
2153 info
.si_code
= SI_USER
;
2154 info
.si_pid
= current
->tgid
;
2155 info
.si_uid
= current
->uid
;
2157 return kill_something_info(sig
, &info
, pid
);
2160 static int do_tkill(int tgid
, int pid
, int sig
)
2163 struct siginfo info
;
2164 struct task_struct
*p
;
2167 info
.si_signo
= sig
;
2169 info
.si_code
= SI_TKILL
;
2170 info
.si_pid
= current
->tgid
;
2171 info
.si_uid
= current
->uid
;
2173 read_lock(&tasklist_lock
);
2174 p
= find_task_by_pid(pid
);
2175 if (p
&& (tgid
<= 0 || p
->tgid
== tgid
)) {
2176 error
= check_kill_permission(sig
, &info
, p
);
2178 * The null signal is a permissions and process existence
2179 * probe. No signal is actually delivered.
2181 if (!error
&& sig
&& p
->sighand
) {
2182 spin_lock_irq(&p
->sighand
->siglock
);
2183 handle_stop_signal(sig
, p
);
2184 error
= specific_send_sig_info(sig
, &info
, p
);
2185 spin_unlock_irq(&p
->sighand
->siglock
);
2188 read_unlock(&tasklist_lock
);
2194 * sys_tgkill - send signal to one specific thread
2195 * @tgid: the thread group ID of the thread
2196 * @pid: the PID of the thread
2197 * @sig: signal to be sent
2199 * This syscall also checks the tgid and returns -ESRCH even if the PID
2200 * exists but it's not belonging to the target process anymore. This
2201 * method solves the problem of threads exiting and PIDs getting reused.
2203 asmlinkage
long sys_tgkill(int tgid
, int pid
, int sig
)
2205 /* This is only valid for single tasks */
2206 if (pid
<= 0 || tgid
<= 0)
2209 return do_tkill(tgid
, pid
, sig
);
2213 * Send a signal to only one task, even if it's a CLONE_THREAD task.
2216 sys_tkill(int pid
, int sig
)
2218 /* This is only valid for single tasks */
2222 return do_tkill(0, pid
, sig
);
2226 sys_rt_sigqueueinfo(int pid
, int sig
, siginfo_t __user
*uinfo
)
2230 if (copy_from_user(&info
, uinfo
, sizeof(siginfo_t
)))
2233 /* Not even root can pretend to send signals from the kernel.
2234 Nor can they impersonate a kill(), which adds source info. */
2235 if (info
.si_code
>= 0)
2237 info
.si_signo
= sig
;
2239 /* POSIX.1b doesn't mention process groups. */
2240 return kill_proc_info(sig
, &info
, pid
);
2243 int do_sigaction(int sig
, struct k_sigaction
*act
, struct k_sigaction
*oact
)
2245 struct k_sigaction
*k
;
2248 if (!valid_signal(sig
) || sig
< 1 || (act
&& sig_kernel_only(sig
)))
2251 k
= ¤t
->sighand
->action
[sig
-1];
2253 spin_lock_irq(¤t
->sighand
->siglock
);
2254 if (signal_pending(current
)) {
2256 * If there might be a fatal signal pending on multiple
2257 * threads, make sure we take it before changing the action.
2259 spin_unlock_irq(¤t
->sighand
->siglock
);
2260 return -ERESTARTNOINTR
;
2267 sigdelsetmask(&act
->sa
.sa_mask
,
2268 sigmask(SIGKILL
) | sigmask(SIGSTOP
));
2272 * "Setting a signal action to SIG_IGN for a signal that is
2273 * pending shall cause the pending signal to be discarded,
2274 * whether or not it is blocked."
2276 * "Setting a signal action to SIG_DFL for a signal that is
2277 * pending and whose default action is to ignore the signal
2278 * (for example, SIGCHLD), shall cause the pending signal to
2279 * be discarded, whether or not it is blocked"
2281 if (act
->sa
.sa_handler
== SIG_IGN
||
2282 (act
->sa
.sa_handler
== SIG_DFL
&& sig_kernel_ignore(sig
))) {
2283 struct task_struct
*t
= current
;
2285 sigaddset(&mask
, sig
);
2286 rm_from_queue_full(&mask
, &t
->signal
->shared_pending
);
2288 rm_from_queue_full(&mask
, &t
->pending
);
2289 recalc_sigpending_tsk(t
);
2291 } while (t
!= current
);
2295 spin_unlock_irq(¤t
->sighand
->siglock
);
2300 do_sigaltstack (const stack_t __user
*uss
, stack_t __user
*uoss
, unsigned long sp
)
2306 oss
.ss_sp
= (void __user
*) current
->sas_ss_sp
;
2307 oss
.ss_size
= current
->sas_ss_size
;
2308 oss
.ss_flags
= sas_ss_flags(sp
);
2317 if (!access_ok(VERIFY_READ
, uss
, sizeof(*uss
))
2318 || __get_user(ss_sp
, &uss
->ss_sp
)
2319 || __get_user(ss_flags
, &uss
->ss_flags
)
2320 || __get_user(ss_size
, &uss
->ss_size
))
2324 if (on_sig_stack(sp
))
2330 * Note - this code used to test ss_flags incorrectly
2331 * old code may have been written using ss_flags==0
2332 * to mean ss_flags==SS_ONSTACK (as this was the only
2333 * way that worked) - this fix preserves that older
2336 if (ss_flags
!= SS_DISABLE
&& ss_flags
!= SS_ONSTACK
&& ss_flags
!= 0)
2339 if (ss_flags
== SS_DISABLE
) {
2344 if (ss_size
< MINSIGSTKSZ
)
2348 current
->sas_ss_sp
= (unsigned long) ss_sp
;
2349 current
->sas_ss_size
= ss_size
;
2354 if (copy_to_user(uoss
, &oss
, sizeof(oss
)))
2363 #ifdef __ARCH_WANT_SYS_SIGPENDING
2366 sys_sigpending(old_sigset_t __user
*set
)
2368 return do_sigpending(set
, sizeof(*set
));
2373 #ifdef __ARCH_WANT_SYS_SIGPROCMASK
2374 /* Some platforms have their own version with special arguments others
2375 support only sys_rt_sigprocmask. */
2378 sys_sigprocmask(int how
, old_sigset_t __user
*set
, old_sigset_t __user
*oset
)
2381 old_sigset_t old_set
, new_set
;
2385 if (copy_from_user(&new_set
, set
, sizeof(*set
)))
2387 new_set
&= ~(sigmask(SIGKILL
) | sigmask(SIGSTOP
));
2389 spin_lock_irq(¤t
->sighand
->siglock
);
2390 old_set
= current
->blocked
.sig
[0];
2398 sigaddsetmask(¤t
->blocked
, new_set
);
2401 sigdelsetmask(¤t
->blocked
, new_set
);
2404 current
->blocked
.sig
[0] = new_set
;
2408 recalc_sigpending();
2409 spin_unlock_irq(¤t
->sighand
->siglock
);
2415 old_set
= current
->blocked
.sig
[0];
2418 if (copy_to_user(oset
, &old_set
, sizeof(*oset
)))
2425 #endif /* __ARCH_WANT_SYS_SIGPROCMASK */
2427 #ifdef __ARCH_WANT_SYS_RT_SIGACTION
2429 sys_rt_sigaction(int sig
,
2430 const struct sigaction __user
*act
,
2431 struct sigaction __user
*oact
,
2434 struct k_sigaction new_sa
, old_sa
;
2437 /* XXX: Don't preclude handling different sized sigset_t's. */
2438 if (sigsetsize
!= sizeof(sigset_t
))
2442 if (copy_from_user(&new_sa
.sa
, act
, sizeof(new_sa
.sa
)))
2446 ret
= do_sigaction(sig
, act
? &new_sa
: NULL
, oact
? &old_sa
: NULL
);
2449 if (copy_to_user(oact
, &old_sa
.sa
, sizeof(old_sa
.sa
)))
2455 #endif /* __ARCH_WANT_SYS_RT_SIGACTION */
2457 #ifdef __ARCH_WANT_SYS_SGETMASK
2460 * For backwards compatibility. Functionality superseded by sigprocmask.
2466 return current
->blocked
.sig
[0];
2470 sys_ssetmask(int newmask
)
2474 spin_lock_irq(¤t
->sighand
->siglock
);
2475 old
= current
->blocked
.sig
[0];
2477 siginitset(¤t
->blocked
, newmask
& ~(sigmask(SIGKILL
)|
2479 recalc_sigpending();
2480 spin_unlock_irq(¤t
->sighand
->siglock
);
2484 #endif /* __ARCH_WANT_SGETMASK */
2486 #ifdef __ARCH_WANT_SYS_SIGNAL
2488 * For backwards compatibility. Functionality superseded by sigaction.
2490 asmlinkage
unsigned long
2491 sys_signal(int sig
, __sighandler_t handler
)
2493 struct k_sigaction new_sa
, old_sa
;
2496 new_sa
.sa
.sa_handler
= handler
;
2497 new_sa
.sa
.sa_flags
= SA_ONESHOT
| SA_NOMASK
;
2498 sigemptyset(&new_sa
.sa
.sa_mask
);
2500 ret
= do_sigaction(sig
, &new_sa
, &old_sa
);
2502 return ret
? ret
: (unsigned long)old_sa
.sa
.sa_handler
;
2504 #endif /* __ARCH_WANT_SYS_SIGNAL */
2506 #ifdef __ARCH_WANT_SYS_PAUSE
2511 current
->state
= TASK_INTERRUPTIBLE
;
2513 return -ERESTARTNOHAND
;
2518 #ifdef __ARCH_WANT_SYS_RT_SIGSUSPEND
2519 asmlinkage
long sys_rt_sigsuspend(sigset_t __user
*unewset
, size_t sigsetsize
)
2523 /* XXX: Don't preclude handling different sized sigset_t's. */
2524 if (sigsetsize
!= sizeof(sigset_t
))
2527 if (copy_from_user(&newset
, unewset
, sizeof(newset
)))
2529 sigdelsetmask(&newset
, sigmask(SIGKILL
)|sigmask(SIGSTOP
));
2531 spin_lock_irq(¤t
->sighand
->siglock
);
2532 current
->saved_sigmask
= current
->blocked
;
2533 current
->blocked
= newset
;
2534 recalc_sigpending();
2535 spin_unlock_irq(¤t
->sighand
->siglock
);
2537 current
->state
= TASK_INTERRUPTIBLE
;
2539 set_thread_flag(TIF_RESTORE_SIGMASK
);
2540 return -ERESTARTNOHAND
;
2542 #endif /* __ARCH_WANT_SYS_RT_SIGSUSPEND */
2544 void __init
signals_init(void)
2547 kmem_cache_create("sigqueue",
2548 sizeof(struct sigqueue
),
2549 __alignof__(struct sigqueue
),
2550 SLAB_PANIC
, NULL
, NULL
);