Get rid of arch/mips64/kernel. 9116 lines of code gone.
[linux-2.6/linux-mips.git] / sound / oss / gus_card.c
blobd7a56331ecaed974e7543a7979da3ea45e9daa76
1 /*
2 * sound/gus_card.c
4 * Detection routine for the Gravis Ultrasound.
6 * Copyright (C) by Hannu Savolainen 1993-1997
9 * Frank van de Pol : Fixed GUS MAX interrupt handling, enabled simultanious
10 * usage of CS4231A codec, GUS wave and MIDI for GUS MAX.
11 * Christoph Hellwig: Adapted to module_init/module_exit, simple cleanups.
13 * Status:
14 * Tested...
18 #include <linux/config.h>
19 #include <linux/init.h>
20 #include <linux/interrupt.h>
21 #include <linux/module.h>
23 #include "sound_config.h"
25 #include "gus.h"
26 #include "gus_hw.h"
28 irqreturn_t gusintr(int irq, void *dev_id, struct pt_regs *dummy);
30 int gus_base = 0, gus_irq = 0, gus_dma = 0;
31 int gus_no_wave_dma = 0;
32 extern int gus_wave_volume;
33 extern int gus_pcm_volume;
34 extern int have_gus_max;
35 int gus_pnp_flag = 0;
36 #ifdef CONFIG_SOUND_GUS16
37 static int db16 = 0; /* Has a Gus16 AD1848 on it */
38 #endif
40 static void __init attach_gus(struct address_info *hw_config)
42 gus_wave_init(hw_config);
44 request_region(hw_config->io_base, 16, "GUS");
45 request_region(hw_config->io_base + 0x100, 12, "GUS"); /* 0x10c-> is MAX */
47 if (sound_alloc_dma(hw_config->dma, "GUS"))
48 printk(KERN_ERR "gus_card.c: Can't allocate DMA channel %d\n", hw_config->dma);
49 if (hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma)
50 if (sound_alloc_dma(hw_config->dma2, "GUS(2)"))
51 printk(KERN_ERR "gus_card.c: Can't allocate DMA channel %d\n", hw_config->dma2);
52 gus_midi_init(hw_config);
53 if(request_irq(hw_config->irq, gusintr, 0, "Gravis Ultrasound", hw_config)<0)
54 printk(KERN_ERR "gus_card.c: Unable to allocate IRQ %d\n", hw_config->irq);
56 return;
59 static int __init probe_gus(struct address_info *hw_config)
61 int irq;
62 int io_addr;
64 if (hw_config->card_subtype == 1)
65 gus_pnp_flag = 1;
67 irq = hw_config->irq;
69 if (hw_config->card_subtype == 0) /* GUS/MAX/ACE */
70 if (irq != 3 && irq != 5 && irq != 7 && irq != 9 &&
71 irq != 11 && irq != 12 && irq != 15)
73 printk(KERN_ERR "GUS: Unsupported IRQ %d\n", irq);
74 return 0;
76 if (check_region(hw_config->io_base, 16))
77 printk(KERN_ERR "GUS: I/O range conflict (1)\n");
78 else if (check_region(hw_config->io_base + 0x100, 16))
79 printk(KERN_ERR "GUS: I/O range conflict (2)\n");
80 else if (gus_wave_detect(hw_config->io_base))
81 return 1;
83 #ifndef EXCLUDE_GUS_IODETECT
86 * Look at the possible base addresses (0x2X0, X=1, 2, 3, 4, 5, 6)
89 for (io_addr = 0x210; io_addr <= 0x260; io_addr += 0x10)
90 if (io_addr != hw_config->io_base) /*
91 * Already tested
93 if (!check_region(io_addr, 16))
94 if (!check_region(io_addr + 0x100, 16))
95 if (gus_wave_detect(io_addr))
97 hw_config->io_base = io_addr;
98 return 1;
100 #endif
102 printk("NO GUS card found !\n");
103 return 0;
106 static void __exit unload_gus(struct address_info *hw_config)
108 DDB(printk("unload_gus(%x)\n", hw_config->io_base));
110 gus_wave_unload(hw_config);
112 release_region(hw_config->io_base, 16);
113 release_region(hw_config->io_base + 0x100, 12); /* 0x10c-> is MAX */
114 free_irq(hw_config->irq, hw_config);
116 sound_free_dma(hw_config->dma);
118 if (hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma)
119 sound_free_dma(hw_config->dma2);
122 irqreturn_t gusintr(int irq, void *dev_id, struct pt_regs *dummy)
124 unsigned char src;
125 extern int gus_timer_enabled;
126 int handled = 0;
128 #ifdef CONFIG_SOUND_GUSMAX
129 if (have_gus_max) {
130 struct address_info *hw_config = dev_id;
131 adintr(irq, (void *)hw_config->slots[1], NULL);
133 #endif
134 #ifdef CONFIG_SOUND_GUS16
135 if (db16) {
136 struct address_info *hw_config = dev_id;
137 adintr(irq, (void *)hw_config->slots[3], NULL);
139 #endif
141 while (1)
143 if (!(src = inb(u_IrqStatus)))
144 break;
145 handled = 1;
146 if (src & DMA_TC_IRQ)
148 guswave_dma_irq();
150 if (src & (MIDI_TX_IRQ | MIDI_RX_IRQ))
152 gus_midi_interrupt(0);
154 if (src & (GF1_TIMER1_IRQ | GF1_TIMER2_IRQ))
156 if (gus_timer_enabled)
157 sound_timer_interrupt();
158 gus_write8(0x45, 0); /* Ack IRQ */
159 gus_timer_command(4, 0x80); /* Reset IRQ flags */
161 if (src & (WAVETABLE_IRQ | ENVELOPE_IRQ))
162 gus_voice_irq();
164 return IRQ_RETVAL(handled);
168 * Some extra code for the 16 bit sampling option
171 #ifdef CONFIG_SOUND_GUS16
173 static int __init probe_gus_db16(struct address_info *hw_config)
175 return ad1848_detect(hw_config->io_base, NULL, hw_config->osp);
178 static void __init attach_gus_db16(struct address_info *hw_config)
180 gus_pcm_volume = 100;
181 gus_wave_volume = 90;
183 hw_config->slots[3] = ad1848_init("GUS 16 bit sampling", hw_config->io_base,
184 hw_config->irq,
185 hw_config->dma,
186 hw_config->dma, 0,
187 hw_config->osp,
188 THIS_MODULE);
191 static void __exit unload_gus_db16(struct address_info *hw_config)
194 ad1848_unload(hw_config->io_base,
195 hw_config->irq,
196 hw_config->dma,
197 hw_config->dma, 0);
198 sound_unload_audiodev(hw_config->slots[3]);
200 #endif
202 #ifdef CONFIG_SOUND_GUS16
203 static int gus16 = 0;
204 #endif
205 #ifdef CONFIG_SOUND_GUSMAX
206 static int no_wave_dma = 0;/* Set if no dma is to be used for the
207 wave table (GF1 chip) */
208 #endif
212 * Note DMA2 of -1 has the right meaning in the GUS driver as well
213 * as here.
216 static struct address_info cfg;
218 static int __initdata io = -1;
219 static int __initdata irq = -1;
220 static int __initdata dma = -1;
221 static int __initdata dma16 = -1; /* Set this for modules that need it */
222 static int __initdata type = 0; /* 1 for PnP */
224 MODULE_PARM(io, "i");
225 MODULE_PARM(irq, "i");
226 MODULE_PARM(dma, "i");
227 MODULE_PARM(dma16, "i");
228 MODULE_PARM(type, "i");
229 #ifdef CONFIG_SOUND_GUSMAX
230 MODULE_PARM(no_wave_dma, "i");
231 #endif
232 #ifdef CONFIG_SOUND_GUS16
233 MODULE_PARM(db16, "i");
234 MODULE_PARM(gus16, "i");
235 #endif
236 MODULE_LICENSE("GPL");
238 static int __init init_gus(void)
240 printk(KERN_INFO "Gravis Ultrasound audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");
242 cfg.io_base = io;
243 cfg.irq = irq;
244 cfg.dma = dma;
245 cfg.dma2 = dma16;
246 cfg.card_subtype = type;
247 #ifdef CONFIG_SOUND_GUSMAX
248 gus_no_wave_dma = no_wave_dma;
249 #endif
251 if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
252 printk(KERN_ERR "I/O, IRQ, and DMA are mandatory\n");
253 return -EINVAL;
256 #ifdef CONFIG_SOUND_GUS16
257 if (probe_gus_db16(&cfg) && gus16) {
258 /* FIXME: This can't work, can it ? -- Christoph */
259 attach_gus_db16(&cfg);
260 db16 = 1;
262 #endif
263 if (!probe_gus(&cfg))
264 return -ENODEV;
265 attach_gus(&cfg);
267 return 0;
270 static void __exit cleanup_gus(void)
272 #ifdef CONFIG_SOUND_GUS16
273 if (db16)
274 unload_gus_db16(&cfg);
275 #endif
276 unload_gus(&cfg);
279 module_init(init_gus);
280 module_exit(cleanup_gus);
282 #ifndef MODULE
283 static int __init setup_gus(char *str)
285 /* io, irq, dma, dma2 */
286 int ints[5];
288 str = get_options(str, ARRAY_SIZE(ints), ints);
290 io = ints[1];
291 irq = ints[2];
292 dma = ints[3];
293 dma16 = ints[4];
295 return 1;
298 __setup("gus=", setup_gus);
299 #endif