[PATCH] drivers/mfd: header included twice

[linux-2.6/linux-mips.git] / include / rdma / ib_mad.h

/*
 * Copyright (c) 2004 Mellanox Technologies Ltd.  All rights reserved.
 * Copyright (c) 2004 Infinicon Corporation.  All rights reserved.
 * Copyright (c) 2004 Intel Corporation.  All rights reserved.
 * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
 * Copyright (c) 2004 Voltaire Corporation.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *
 * $Id: ib_mad.h 2775 2005-07-02 13:42:12Z halr $
 */

#if !defined( IB_MAD_H )
#define IB_MAD_H

#include <linux/pci.h>

#include <rdma/ib_verbs.h>

/* Management base version */
#define IB_MGMT_BASE_VERSION                    1

/* Management classes */
#define IB_MGMT_CLASS_SUBN_LID_ROUTED           0x01
#define IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE       0x81
#define IB_MGMT_CLASS_SUBN_ADM                  0x03
#define IB_MGMT_CLASS_PERF_MGMT                 0x04
#define IB_MGMT_CLASS_BM                        0x05
#define IB_MGMT_CLASS_DEVICE_MGMT               0x06
#define IB_MGMT_CLASS_CM                        0x07
#define IB_MGMT_CLASS_SNMP                      0x08
#define IB_MGMT_CLASS_VENDOR_RANGE2_START       0x30
#define IB_MGMT_CLASS_VENDOR_RANGE2_END         0x4F

#define IB_OPENIB_OUI                           (0x001405)

/* Management methods */
#define IB_MGMT_METHOD_GET                      0x01
#define IB_MGMT_METHOD_SET                      0x02
#define IB_MGMT_METHOD_GET_RESP                 0x81
#define IB_MGMT_METHOD_SEND                     0x03
#define IB_MGMT_METHOD_TRAP                     0x05
#define IB_MGMT_METHOD_REPORT                   0x06
#define IB_MGMT_METHOD_REPORT_RESP              0x86
#define IB_MGMT_METHOD_TRAP_REPRESS             0x07

#define IB_MGMT_METHOD_RESP                     0x80

#define IB_MGMT_MAX_METHODS                     128

/* RMPP information */
#define IB_MGMT_RMPP_VERSION                    1

#define IB_MGMT_RMPP_TYPE_DATA                  1
#define IB_MGMT_RMPP_TYPE_ACK                   2
#define IB_MGMT_RMPP_TYPE_STOP                  3
#define IB_MGMT_RMPP_TYPE_ABORT                 4

#define IB_MGMT_RMPP_FLAG_ACTIVE                1
#define IB_MGMT_RMPP_FLAG_FIRST                 (1<<1)
#define IB_MGMT_RMPP_FLAG_LAST                  (1<<2)

#define IB_MGMT_RMPP_NO_RESPTIME                0x1F

#define IB_MGMT_RMPP_STATUS_SUCCESS             0
#define IB_MGMT_RMPP_STATUS_RESX                1
#define IB_MGMT_RMPP_STATUS_ABORT_MIN           118
#define IB_MGMT_RMPP_STATUS_T2L                 118
#define IB_MGMT_RMPP_STATUS_BAD_LEN             119
#define IB_MGMT_RMPP_STATUS_BAD_SEG             120
#define IB_MGMT_RMPP_STATUS_BADT                121
#define IB_MGMT_RMPP_STATUS_W2S                 122
#define IB_MGMT_RMPP_STATUS_S2B                 123
#define IB_MGMT_RMPP_STATUS_BAD_STATUS          124
#define IB_MGMT_RMPP_STATUS_UNV                 125
#define IB_MGMT_RMPP_STATUS_TMR                 126
#define IB_MGMT_RMPP_STATUS_UNSPEC              127
#define IB_MGMT_RMPP_STATUS_ABORT_MAX           127

#define IB_QP0          0
#define IB_QP1          __constant_htonl(1)
#define IB_QP1_QKEY     0x80010000
#define IB_QP_SET_QKEY  0x80000000

enum {
        IB_MGMT_MAD_HDR = 24,
        IB_MGMT_MAD_DATA = 232,
        IB_MGMT_RMPP_HDR = 36,
        IB_MGMT_RMPP_DATA = 220,
        IB_MGMT_VENDOR_HDR = 40,
        IB_MGMT_VENDOR_DATA = 216,
        IB_MGMT_SA_HDR = 56,
        IB_MGMT_SA_DATA = 200,
};

struct ib_mad_hdr {
        u8      base_version;
        u8      mgmt_class;
        u8      class_version;
        u8      method;
        __be16  status;
        __be16  class_specific;
        __be64  tid;
        __be16  attr_id;
        __be16  resv;
        __be32  attr_mod;
};

struct ib_rmpp_hdr {
        u8      rmpp_version;
        u8      rmpp_type;
        u8      rmpp_rtime_flags;
        u8      rmpp_status;
        __be32  seg_num;
        __be32  paylen_newwin;
};

typedef u64 __bitwise ib_sa_comp_mask;

#define IB_SA_COMP_MASK(n) ((__force ib_sa_comp_mask) cpu_to_be64(1ull << n))

/*
 * ib_sa_hdr and ib_sa_mad structures must be packed because they have
 * 64-bit fields that are only 32-bit aligned. 64-bit architectures will
 * lay them out wrong otherwise.  (And unfortunately they are sent on
 * the wire so we can't change the layout)
 */
struct ib_sa_hdr {
        __be64                  sm_key;
        __be16                  attr_offset;
        __be16                  reserved;
        ib_sa_comp_mask         comp_mask;
} __attribute__ ((packed));

struct ib_mad {
        struct ib_mad_hdr       mad_hdr;
        u8                      data[IB_MGMT_MAD_DATA];
};

struct ib_rmpp_mad {
        struct ib_mad_hdr       mad_hdr;
        struct ib_rmpp_hdr      rmpp_hdr;
        u8                      data[IB_MGMT_RMPP_DATA];
};

struct ib_sa_mad {
        struct ib_mad_hdr       mad_hdr;
        struct ib_rmpp_hdr      rmpp_hdr;
        struct ib_sa_hdr        sa_hdr;
        u8                      data[IB_MGMT_SA_DATA];
} __attribute__ ((packed));

struct ib_vendor_mad {
        struct ib_mad_hdr       mad_hdr;
        struct ib_rmpp_hdr      rmpp_hdr;
        u8                      reserved;
        u8                      oui[3];
        u8                      data[IB_MGMT_VENDOR_DATA];
};

struct ib_class_port_info
{
        u8                      base_version;
        u8                      class_version;
        __be16                  capability_mask;
        u8                      reserved[3];
        u8                      resp_time_value;
        u8                      redirect_gid[16];
        __be32                  redirect_tcslfl;
        __be16                  redirect_lid;
        __be16                  redirect_pkey;
        __be32                  redirect_qp;
        __be32                  redirect_qkey;
        u8                      trap_gid[16];
        __be32                  trap_tcslfl;
        __be16                  trap_lid;
        __be16                  trap_pkey;
        __be32                  trap_hlqp;
        __be32                  trap_qkey;
};

/**
 * ib_mad_send_buf - MAD data buffer and work request for sends.
 * @next: A pointer used to chain together MADs for posting.
 * @mad: References an allocated MAD data buffer.
 * @mad_agent: MAD agent that allocated the buffer.
 * @ah: The address handle to use when sending the MAD.
 * @context: User-controlled context fields.
 * @timeout_ms: Time to wait for a response.
 * @retries: Number of times to retry a request for a response.
 *
 * Users are responsible for initializing the MAD buffer itself, with the
 * exception of specifying the payload length field in any RMPP MAD.
 */
struct ib_mad_send_buf {
        struct ib_mad_send_buf  *next;
        void                    *mad;
        struct ib_mad_agent     *mad_agent;
        struct ib_ah            *ah;
        void                    *context[2];
        int                     timeout_ms;
        int                     retries;
};

/**
 * ib_get_rmpp_resptime - Returns the RMPP response time.
 * @rmpp_hdr: An RMPP header.
 */
static inline u8 ib_get_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr)
{
        return rmpp_hdr->rmpp_rtime_flags >> 3;
}

/**
 * ib_get_rmpp_flags - Returns the RMPP flags.
 * @rmpp_hdr: An RMPP header.
 */
static inline u8 ib_get_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr)
{
        return rmpp_hdr->rmpp_rtime_flags & 0x7;
}

/**
 * ib_set_rmpp_resptime - Sets the response time in an RMPP header.
 * @rmpp_hdr: An RMPP header.
 * @rtime: The response time to set.
 */
static inline void ib_set_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr, u8 rtime)
{
        rmpp_hdr->rmpp_rtime_flags = ib_get_rmpp_flags(rmpp_hdr) | (rtime << 3);
}

/**
 * ib_set_rmpp_flags - Sets the flags in an RMPP header.
 * @rmpp_hdr: An RMPP header.
 * @flags: The flags to set.
 */
static inline void ib_set_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr, u8 flags)
{
        rmpp_hdr->rmpp_rtime_flags = (rmpp_hdr->rmpp_rtime_flags & 0xF1) |
                                     (flags & 0x7);
}

struct ib_mad_agent;
struct ib_mad_send_wc;
struct ib_mad_recv_wc;

/**
 * ib_mad_send_handler - callback handler for a sent MAD.
 * @mad_agent: MAD agent that sent the MAD.
 * @mad_send_wc: Send work completion information on the sent MAD.
 */
typedef void (*ib_mad_send_handler)(struct ib_mad_agent *mad_agent,
                                    struct ib_mad_send_wc *mad_send_wc);

/**
 * ib_mad_snoop_handler - Callback handler for snooping sent MADs.
 * @mad_agent: MAD agent that snooped the MAD.
 * @send_wr: Work request information on the sent MAD.
 * @mad_send_wc: Work completion information on the sent MAD.  Valid
 *   only for snooping that occurs on a send completion.
 *
 * Clients snooping MADs should not modify data referenced by the @send_wr
 * or @mad_send_wc.
 */
typedef void (*ib_mad_snoop_handler)(struct ib_mad_agent *mad_agent,
                                     struct ib_mad_send_buf *send_buf,
                                     struct ib_mad_send_wc *mad_send_wc);

/**
 * ib_mad_recv_handler - callback handler for a received MAD.
 * @mad_agent: MAD agent requesting the received MAD.
 * @mad_recv_wc: Received work completion information on the received MAD.
 *
 * MADs received in response to a send request operation will be handed to
 * the user after the send operation completes.  All data buffers given
 * to registered agents through this routine are owned by the receiving
 * client, except for snooping agents.  Clients snooping MADs should not
 * modify the data referenced by @mad_recv_wc.
 */
typedef void (*ib_mad_recv_handler)(struct ib_mad_agent *mad_agent,
                                    struct ib_mad_recv_wc *mad_recv_wc);

/**
 * ib_mad_agent - Used to track MAD registration with the access layer.
 * @device: Reference to device registration is on.
 * @qp: Reference to QP used for sending and receiving MADs.
 * @mr: Memory region for system memory usable for DMA.
 * @recv_handler: Callback handler for a received MAD.
 * @send_handler: Callback handler for a sent MAD.
 * @snoop_handler: Callback handler for snooped sent MADs.
 * @context: User-specified context associated with this registration.
 * @hi_tid: Access layer assigned transaction ID for this client.
 *   Unsolicited MADs sent by this client will have the upper 32-bits
 *   of their TID set to this value.
 * @port_num: Port number on which QP is registered
 * @rmpp_version: If set, indicates the RMPP version used by this agent.
 */
struct ib_mad_agent {
        struct ib_device        *device;
        struct ib_qp            *qp;
        struct ib_mr            *mr;
        ib_mad_recv_handler     recv_handler;
        ib_mad_send_handler     send_handler;
        ib_mad_snoop_handler    snoop_handler;
        void                    *context;
        u32                     hi_tid;
        u8                      port_num;
        u8                      rmpp_version;
};

/**
 * ib_mad_send_wc - MAD send completion information.
 * @send_buf: Send MAD data buffer associated with the send MAD request.
 * @status: Completion status.
 * @vendor_err: Optional vendor error information returned with a failed
 *   request.
 */
struct ib_mad_send_wc {
        struct ib_mad_send_buf  *send_buf;
        enum ib_wc_status       status;
        u32                     vendor_err;
};

/**
 * ib_mad_recv_buf - received MAD buffer information.
 * @list: Reference to next data buffer for a received RMPP MAD.
 * @grh: References a data buffer containing the global route header.
 *   The data refereced by this buffer is only valid if the GRH is
 *   valid.
 * @mad: References the start of the received MAD.
 */
struct ib_mad_recv_buf {
        struct list_head        list;
        struct ib_grh           *grh;
        struct ib_mad           *mad;
};

/**
 * ib_mad_recv_wc - received MAD information.
 * @wc: Completion information for the received data.
 * @recv_buf: Specifies the location of the received data buffer(s).
 * @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers.
 * @mad_len: The length of the received MAD, without duplicated headers.
 *
 * For received response, the wr_id contains a pointer to the ib_mad_send_buf
 *   for the corresponding send request.
 */
struct ib_mad_recv_wc {
        struct ib_wc            *wc;
        struct ib_mad_recv_buf  recv_buf;
        struct list_head        rmpp_list;
        int                     mad_len;
};

/**
 * ib_mad_reg_req - MAD registration request
 * @mgmt_class: Indicates which management class of MADs should be receive
 *   by the caller.  This field is only required if the user wishes to
 *   receive unsolicited MADs, otherwise it should be 0.
 * @mgmt_class_version: Indicates which version of MADs for the given
 *   management class to receive.
 * @oui: Indicates IEEE OUI when mgmt_class is a vendor class
 *   in the range from 0x30 to 0x4f. Otherwise not used.
 * @method_mask: The caller will receive unsolicited MADs for any method
 *   where @method_mask = 1.
 */
struct ib_mad_reg_req {
        u8      mgmt_class;
        u8      mgmt_class_version;
        u8      oui[3];
        DECLARE_BITMAP(method_mask, IB_MGMT_MAX_METHODS);
};

/**
 * ib_register_mad_agent - Register to send/receive MADs.
 * @device: The device to register with.
 * @port_num: The port on the specified device to use.
 * @qp_type: Specifies which QP to access.  Must be either
 *   IB_QPT_SMI or IB_QPT_GSI.
 * @mad_reg_req: Specifies which unsolicited MADs should be received
 *   by the caller.  This parameter may be NULL if the caller only
 *   wishes to receive solicited responses.
 * @rmpp_version: If set, indicates that the client will send
 *   and receive MADs that contain the RMPP header for the given version.
 *   If set to 0, indicates that RMPP is not used by this client.
 * @send_handler: The completion callback routine invoked after a send
 *   request has completed.
 * @recv_handler: The completion callback routine invoked for a received
 *   MAD.
 * @context: User specified context associated with the registration.
 */
struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
                                           u8 port_num,
                                           enum ib_qp_type qp_type,
                                           struct ib_mad_reg_req *mad_reg_req,
                                           u8 rmpp_version,
                                           ib_mad_send_handler send_handler,
                                           ib_mad_recv_handler recv_handler,
                                           void *context);

enum ib_mad_snoop_flags {
        /*IB_MAD_SNOOP_POSTED_SENDS        = 1,*/
        /*IB_MAD_SNOOP_RMPP_SENDS          = (1<<1),*/
        IB_MAD_SNOOP_SEND_COMPLETIONS      = (1<<2),
        /*IB_MAD_SNOOP_RMPP_SEND_COMPLETIONS = (1<<3),*/
        IB_MAD_SNOOP_RECVS                 = (1<<4)
        /*IB_MAD_SNOOP_RMPP_RECVS          = (1<<5),*/
        /*IB_MAD_SNOOP_REDIRECTED_QPS      = (1<<6)*/
};

/**
 * ib_register_mad_snoop - Register to snoop sent and received MADs.
 * @device: The device to register with.
 * @port_num: The port on the specified device to use.
 * @qp_type: Specifies which QP traffic to snoop.  Must be either
 *   IB_QPT_SMI or IB_QPT_GSI.
 * @mad_snoop_flags: Specifies information where snooping occurs.
 * @send_handler: The callback routine invoked for a snooped send.
 * @recv_handler: The callback routine invoked for a snooped receive.
 * @context: User specified context associated with the registration.
 */
struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device,
                                           u8 port_num,
                                           enum ib_qp_type qp_type,
                                           int mad_snoop_flags,
                                           ib_mad_snoop_handler snoop_handler,
                                           ib_mad_recv_handler recv_handler,
                                           void *context);

/**
 * ib_unregister_mad_agent - Unregisters a client from using MAD services.
 * @mad_agent: Corresponding MAD registration request to deregister.
 *
 * After invoking this routine, MAD services are no longer usable by the
 * client on the associated QP.
 */
int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent);

/**
 * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated
 *   with the registered client.
 * @send_buf: Specifies the information needed to send the MAD(s).
 * @bad_send_buf: Specifies the MAD on which an error was encountered.  This
 *   parameter is optional if only a single MAD is posted.
 *
 * Sent MADs are not guaranteed to complete in the order that they were posted.
 *
 * If the MAD requires RMPP, the data buffer should contain a single copy
 * of the common MAD, RMPP, and class specific headers, followed by the class
 * defined data.  If the class defined data would not divide evenly into
 * RMPP segments, then space must be allocated at the end of the referenced
 * buffer for any required padding.  To indicate the amount of class defined
 * data being transferred, the paylen_newwin field in the RMPP header should
 * be set to the size of the class specific header plus the amount of class
 * defined data being transferred.  The paylen_newwin field should be
 * specified in network-byte order.
 */
int ib_post_send_mad(struct ib_mad_send_buf *send_buf,
                     struct ib_mad_send_buf **bad_send_buf);

/**
 * ib_coalesce_recv_mad - Coalesces received MAD data into a single buffer.
 * @mad_recv_wc: Work completion information for a received MAD.
 * @buf: User-provided data buffer to receive the coalesced buffers.  The
 *   referenced buffer should be at least the size of the mad_len specified
 *   by @mad_recv_wc.
 *
 * This call copies a chain of received MAD segments into a single data buffer,
 * removing duplicated headers.
 */
void ib_coalesce_recv_mad(struct ib_mad_recv_wc *mad_recv_wc, void *buf);

/**
 * ib_free_recv_mad - Returns data buffers used to receive a MAD.
 * @mad_recv_wc: Work completion information for a received MAD.
 *
 * Clients receiving MADs through their ib_mad_recv_handler must call this
 * routine to return the work completion buffers to the access layer.
 */
void ib_free_recv_mad(struct ib_mad_recv_wc *mad_recv_wc);

/**
 * ib_cancel_mad - Cancels an outstanding send MAD operation.
 * @mad_agent: Specifies the registration associated with sent MAD.
 * @send_buf: Indicates the MAD to cancel.
 *
 * MADs will be returned to the user through the corresponding
 * ib_mad_send_handler.
 */
void ib_cancel_mad(struct ib_mad_agent *mad_agent,
                   struct ib_mad_send_buf *send_buf);

/**
 * ib_modify_mad - Modifies an outstanding send MAD operation.
 * @mad_agent: Specifies the registration associated with sent MAD.
 * @send_buf: Indicates the MAD to modify.
 * @timeout_ms: New timeout value for sent MAD.
 *
 * This call will reset the timeout value for a sent MAD to the specified
 * value.
 */
int ib_modify_mad(struct ib_mad_agent *mad_agent,
                  struct ib_mad_send_buf *send_buf, u32 timeout_ms);

/**
 * ib_redirect_mad_qp - Registers a QP for MAD services.
 * @qp: Reference to a QP that requires MAD services.
 * @rmpp_version: If set, indicates that the client will send
 *   and receive MADs that contain the RMPP header for the given version.
 *   If set to 0, indicates that RMPP is not used by this client.
 * @send_handler: The completion callback routine invoked after a send
 *   request has completed.
 * @recv_handler: The completion callback routine invoked for a received
 *   MAD.
 * @context: User specified context associated with the registration.
 *
 * Use of this call allows clients to use MAD services, such as RMPP,
 * on user-owned QPs.  After calling this routine, users may send
 * MADs on the specified QP by calling ib_mad_post_send.
 */
struct ib_mad_agent *ib_redirect_mad_qp(struct ib_qp *qp,
                                        u8 rmpp_version,
                                        ib_mad_send_handler send_handler,
                                        ib_mad_recv_handler recv_handler,
                                        void *context);

/**
 * ib_process_mad_wc - Processes a work completion associated with a
 *   MAD sent or received on a redirected QP.
 * @mad_agent: Specifies the registered MAD service using the redirected QP.
 * @wc: References a work completion associated with a sent or received
 *   MAD segment.
 *
 * This routine is used to complete or continue processing on a MAD request.
 * If the work completion is associated with a send operation, calling
 * this routine is required to continue an RMPP transfer or to wait for a
 * corresponding response, if it is a request.  If the work completion is
 * associated with a receive operation, calling this routine is required to
 * process an inbound or outbound RMPP transfer, or to match a response MAD
 * with its corresponding request.
 */
int ib_process_mad_wc(struct ib_mad_agent *mad_agent,
                      struct ib_wc *wc);

/**
 * ib_create_send_mad - Allocate and initialize a data buffer and work request
 *   for sending a MAD.
 * @mad_agent: Specifies the registered MAD service to associate with the MAD.
 * @remote_qpn: Specifies the QPN of the receiving node.
 * @pkey_index: Specifies which PKey the MAD will be sent using.  This field
 *   is valid only if the remote_qpn is QP 1.
 * @rmpp_active: Indicates if the send will enable RMPP.
 * @hdr_len: Indicates the size of the data header of the MAD.  This length
 *   should include the common MAD header, RMPP header, plus any class
 *   specific header.
 * @data_len: Indicates the size of any user-transferred data.  The call will
 *   automatically adjust the allocated buffer size to account for any
 *   additional padding that may be necessary.
 * @gfp_mask: GFP mask used for the memory allocation.
 *
 * This routine allocates a MAD for sending.  The returned MAD send buffer
 * will reference a data buffer usable for sending a MAD, along
 * with an initialized work request structure.  Users may modify the returned
 * MAD data buffer before posting the send.
 *
 * The returned data buffer will be cleared.  Users are responsible for
 * initializing the common MAD and any class specific headers.  If @rmpp_active
 * is set, the RMPP header will be initialized for sending.
 */
struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
                                            u32 remote_qpn, u16 pkey_index,
                                            int rmpp_active,
                                            int hdr_len, int data_len,
                                            gfp_t gfp_mask);

/**
 * ib_free_send_mad - Returns data buffers used to send a MAD.
 * @send_buf: Previously allocated send data buffer.
 */
void ib_free_send_mad(struct ib_mad_send_buf *send_buf);

#endif /* IB_MAD_H */