3 * BRIEF MODULE DESCRIPTION
4 * Board specific pci fixups.
6 * Copyright 2001 MontaVista Software Inc.
7 * Author: MontaVista Software, Inc.
8 * ppopov@mvista.com or source@mvista.com
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
17 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
18 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
21 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
22 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 * You should have received a copy of the GNU General Public License along
27 * with this program; if not, write to the Free Software Foundation, Inc.,
28 * 675 Mass Ave, Cambridge, MA 02139, USA.
30 #include <linux/types.h>
31 #include <linux/pci.h>
32 #include <linux/kernel.h>
33 #include <linux/init.h>
35 #include <asm/jmr3927/jmr3927.h>
39 #define DBG(x...) printk(x)
44 void __init
pcibios_fixup_resources(struct pci_dev
*dev
)
46 /* will need to fixup IO resources */
49 void __init
pcibios_fixup(void)
51 /* nothing to do here */
54 int pci_get_irq(struct pci_dev
*dev
, int pin
)
56 unsigned char irq
= pin
;
58 /* IRQ rotation (PICMG) */
60 if (dev
->bus
->parent
== NULL
&&
61 PCI_SLOT(dev
->devfn
) == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) {
62 /* PCI CardSlot (IDSEL=A23, DevNu=12) */
63 /* PCIA => PCIC (IDSEL=A23) */
64 /* NOTE: JMR3927 JP1 must be set to OPEN */
66 } else if (dev
->bus
->parent
== NULL
&&
67 PCI_SLOT(dev
->devfn
) ==
68 TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) {
69 /* PCI CardSlot (IDSEL=A22, DevNu=11) */
70 /* PCIA => PCIA (IDSEL=A22) */
71 /* NOTE: JMR3927 JP1 must be set to OPEN */
75 irq
= (irq
+ 3 + PCI_SLOT(dev
->devfn
)) % 4;
77 for (bus
= dev
->bus
; bus
->parent
!= NULL
;
79 irq
= (irq
+ 3 + PCI_SLOT(bus
->self
->devfn
)) % 4;
87 irq
= JMR3927_IRQ_IOC_PCIA
;
90 // wrong for backplane irq = JMR3927_IRQ_IOC_PCIB;
91 irq
= JMR3927_IRQ_IOC_PCID
;
94 irq
= JMR3927_IRQ_IOC_PCIC
;
97 // wrong for backplane irq = JMR3927_IRQ_IOC_PCID;
98 irq
= JMR3927_IRQ_IOC_PCIB
;
102 /* Check OnBoard Ethernet (IDSEL=A24, DevNu=13) */
103 if (dev
->bus
->parent
== NULL
&&
104 PCI_SLOT(dev
->devfn
) == TX3927_PCIC_IDSEL_AD_TO_SLOT(24)) {
105 extern int jmr3927_ether1_irq
;
106 /* check this irq line was reserved for ether1 */
107 if (jmr3927_ether1_irq
!= JMR3927_IRQ_ETHER0
)
108 irq
= JMR3927_IRQ_ETHER0
;
110 irq
= 0; /* disable */
115 void __init
pcibios_fixup_irqs(void)
120 pci_for_each_dev(dev
) {
121 pci_read_config_byte(dev
, PCI_INTERRUPT_PIN
, &irq
);
125 /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
126 if (!(dev
->vendor
== PCI_VENDOR_ID_EFAR
&&
127 dev
->device
== PCI_DEVICE_ID_EFAR_SLC90E66_1
)) {
128 irq
= pci_get_irq(dev
, irq
);
129 pci_write_config_byte(dev
, PCI_INTERRUPT_LINE
,
133 pci_read_config_byte(dev
, PCI_INTERRUPT_LINE
, &irq
);
134 printk(KERN_INFO
"PCI: %02x:%02x IRQ %02x\n",
135 dev
->bus
->number
, dev
->devfn
, irq
);