ipv4: fib_trie remove unused argument

[linux-2.6/linux-loongson.git] / drivers / hwmon / fscher.c

/*
 * fscher.c - Part of lm_sensors, Linux kernel modules for hardware
 * monitoring
 * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
 * 
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 * 
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/* 
 *  fujitsu siemens hermes chip, 
 *  module based on fscpos.c 
 *  Copyright (C) 2000 Hermann Jung <hej@odn.de>
 *  Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
 *  and Philip Edelbrock <phil@netroedge.com>
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>

/*
 * Addresses to scan
 */

static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };

/*
 * Insmod parameters
 */

I2C_CLIENT_INSMOD_1(fscher);

/*
 * The FSCHER registers
 */

/* chip identification */
#define FSCHER_REG_IDENT_0              0x00
#define FSCHER_REG_IDENT_1              0x01
#define FSCHER_REG_IDENT_2              0x02
#define FSCHER_REG_REVISION             0x03

/* global control and status */
#define FSCHER_REG_EVENT_STATE          0x04
#define FSCHER_REG_CONTROL              0x05

/* watchdog */
#define FSCHER_REG_WDOG_PRESET          0x28
#define FSCHER_REG_WDOG_STATE           0x23
#define FSCHER_REG_WDOG_CONTROL         0x21

/* fan 0 */
#define FSCHER_REG_FAN0_MIN             0x55
#define FSCHER_REG_FAN0_ACT             0x0e
#define FSCHER_REG_FAN0_STATE           0x0d
#define FSCHER_REG_FAN0_RIPPLE          0x0f

/* fan 1 */
#define FSCHER_REG_FAN1_MIN             0x65
#define FSCHER_REG_FAN1_ACT             0x6b
#define FSCHER_REG_FAN1_STATE           0x62
#define FSCHER_REG_FAN1_RIPPLE          0x6f

/* fan 2 */
#define FSCHER_REG_FAN2_MIN             0xb5
#define FSCHER_REG_FAN2_ACT             0xbb
#define FSCHER_REG_FAN2_STATE           0xb2
#define FSCHER_REG_FAN2_RIPPLE          0xbf

/* voltage supervision */
#define FSCHER_REG_VOLT_12              0x45
#define FSCHER_REG_VOLT_5               0x42
#define FSCHER_REG_VOLT_BATT            0x48

/* temperature 0 */
#define FSCHER_REG_TEMP0_ACT            0x64
#define FSCHER_REG_TEMP0_STATE          0x71

/* temperature 1 */
#define FSCHER_REG_TEMP1_ACT            0x32
#define FSCHER_REG_TEMP1_STATE          0x81

/* temperature 2 */
#define FSCHER_REG_TEMP2_ACT            0x35
#define FSCHER_REG_TEMP2_STATE          0x91

/*
 * Functions declaration
 */

static int fscher_attach_adapter(struct i2c_adapter *adapter);
static int fscher_detect(struct i2c_adapter *adapter, int address, int kind);
static int fscher_detach_client(struct i2c_client *client);
static struct fscher_data *fscher_update_device(struct device *dev);
static void fscher_init_client(struct i2c_client *client);

static int fscher_read_value(struct i2c_client *client, u8 reg);
static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value);

/*
 * Driver data (common to all clients)
 */
 
static struct i2c_driver fscher_driver = {
        .driver = {
                .name   = "fscher",
        },
        .attach_adapter = fscher_attach_adapter,
        .detach_client  = fscher_detach_client,
};

/*
 * Client data (each client gets its own)
 */

struct fscher_data {
        struct i2c_client client;
        struct device *hwmon_dev;
        struct mutex update_lock;
        char valid; /* zero until following fields are valid */
        unsigned long last_updated; /* in jiffies */

        /* register values */
        u8 revision;            /* revision of chip */
        u8 global_event;        /* global event status */
        u8 global_control;      /* global control register */
        u8 watchdog[3];         /* watchdog */
        u8 volt[3];             /* 12, 5, battery voltage */ 
        u8 temp_act[3];         /* temperature */
        u8 temp_status[3];      /* status of sensor */
        u8 fan_act[3];          /* fans revolutions per second */
        u8 fan_status[3];       /* fan status */
        u8 fan_min[3];          /* fan min value for rps */
        u8 fan_ripple[3];       /* divider for rps */
};

/*
 * Sysfs stuff
 */

#define sysfs_r(kind, sub, offset, reg) \
static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \
static ssize_t show_##kind##offset##sub (struct device *, struct device_attribute *attr, char *); \
static ssize_t show_##kind##offset##sub (struct device *dev, struct device_attribute *attr, char *buf) \
{ \
        struct fscher_data *data = fscher_update_device(dev); \
        return show_##kind##sub(data, buf, (offset)); \
}

#define sysfs_w(kind, sub, offset, reg) \
static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \
static ssize_t set_##kind##offset##sub (struct device *, struct device_attribute *attr, const char *, size_t); \
static ssize_t set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
{ \
        struct i2c_client *client = to_i2c_client(dev); \
        struct fscher_data *data = i2c_get_clientdata(client); \
        return set_##kind##sub(client, data, buf, count, (offset), reg); \
}

#define sysfs_rw_n(kind, sub, offset, reg) \
sysfs_r(kind, sub, offset, reg) \
sysfs_w(kind, sub, offset, reg) \
static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub);

#define sysfs_rw(kind, sub, reg) \
sysfs_r(kind, sub, 0, reg) \
sysfs_w(kind, sub, 0, reg) \
static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub);

#define sysfs_ro_n(kind, sub, offset, reg) \
sysfs_r(kind, sub, offset, reg) \
static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL);

#define sysfs_ro(kind, sub, reg) \
sysfs_r(kind, sub, 0, reg) \
static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL);

#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \
sysfs_rw_n(pwm,        , offset, reg_min) \
sysfs_rw_n(fan, _status, offset, reg_status) \
sysfs_rw_n(fan, _div   , offset, reg_ripple) \
sysfs_ro_n(fan, _input , offset, reg_act)

#define sysfs_temp(offset, reg_status, reg_act) \
sysfs_rw_n(temp, _status, offset, reg_status) \
sysfs_ro_n(temp, _input , offset, reg_act)
    
#define sysfs_in(offset, reg_act) \
sysfs_ro_n(in, _input, offset, reg_act)

#define sysfs_revision(reg_revision) \
sysfs_ro(revision, , reg_revision)

#define sysfs_alarms(reg_events) \
sysfs_ro(alarms, , reg_events)

#define sysfs_control(reg_control) \
sysfs_rw(control, , reg_control)

#define sysfs_watchdog(reg_control, reg_status, reg_preset) \
sysfs_rw(watchdog, _control, reg_control) \
sysfs_rw(watchdog, _status , reg_status) \
sysfs_rw(watchdog, _preset , reg_preset)

sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN,
             FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT)
sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN,
             FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT)
sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN,
             FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT)

sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT)
sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT)
sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT)

sysfs_in(0, FSCHER_REG_VOLT_12)
sysfs_in(1, FSCHER_REG_VOLT_5)
sysfs_in(2, FSCHER_REG_VOLT_BATT)

sysfs_revision(FSCHER_REG_REVISION)
sysfs_alarms(FSCHER_REG_EVENTS)
sysfs_control(FSCHER_REG_CONTROL)
sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET)
  
static struct attribute *fscher_attributes[] = {
        &dev_attr_revision.attr,
        &dev_attr_alarms.attr,
        &dev_attr_control.attr,

        &dev_attr_watchdog_status.attr,
        &dev_attr_watchdog_control.attr,
        &dev_attr_watchdog_preset.attr,

        &dev_attr_in0_input.attr,
        &dev_attr_in1_input.attr,
        &dev_attr_in2_input.attr,

        &dev_attr_fan1_status.attr,
        &dev_attr_fan1_div.attr,
        &dev_attr_fan1_input.attr,
        &dev_attr_pwm1.attr,
        &dev_attr_fan2_status.attr,
        &dev_attr_fan2_div.attr,
        &dev_attr_fan2_input.attr,
        &dev_attr_pwm2.attr,
        &dev_attr_fan3_status.attr,
        &dev_attr_fan3_div.attr,
        &dev_attr_fan3_input.attr,
        &dev_attr_pwm3.attr,

        &dev_attr_temp1_status.attr,
        &dev_attr_temp1_input.attr,
        &dev_attr_temp2_status.attr,
        &dev_attr_temp2_input.attr,
        &dev_attr_temp3_status.attr,
        &dev_attr_temp3_input.attr,
        NULL
};

static const struct attribute_group fscher_group = {
        .attrs = fscher_attributes,
};

/*
 * Real code
 */

static int fscher_attach_adapter(struct i2c_adapter *adapter)
{
        if (!(adapter->class & I2C_CLASS_HWMON))
                return 0;
        return i2c_probe(adapter, &addr_data, fscher_detect);
}

static int fscher_detect(struct i2c_adapter *adapter, int address, int kind)
{
        struct i2c_client *new_client;
        struct fscher_data *data;
        int err = 0;

        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                goto exit;

        /* OK. For now, we presume we have a valid client. We now create the
         * client structure, even though we cannot fill it completely yet.
         * But it allows us to access i2c_smbus_read_byte_data. */
        if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
                err = -ENOMEM;
                goto exit;
        }

        /* The common I2C client data is placed right before the
         * Hermes-specific data. */
        new_client = &data->client;
        i2c_set_clientdata(new_client, data);
        new_client->addr = address;
        new_client->adapter = adapter;
        new_client->driver = &fscher_driver;
        new_client->flags = 0;

        /* Do the remaining detection unless force or force_fscher parameter */
        if (kind < 0) {
                if ((i2c_smbus_read_byte_data(new_client,
                     FSCHER_REG_IDENT_0) != 0x48)       /* 'H' */
                 || (i2c_smbus_read_byte_data(new_client,
                     FSCHER_REG_IDENT_1) != 0x45)       /* 'E' */
                 || (i2c_smbus_read_byte_data(new_client,
                     FSCHER_REG_IDENT_2) != 0x52))      /* 'R' */
                        goto exit_free;
        }

        /* Fill in the remaining client fields and put it into the
         * global list */
        strlcpy(new_client->name, "fscher", I2C_NAME_SIZE);
        data->valid = 0;
        mutex_init(&data->update_lock);

        /* Tell the I2C layer a new client has arrived */
        if ((err = i2c_attach_client(new_client)))
                goto exit_free;

        fscher_init_client(new_client);

        /* Register sysfs hooks */
        if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group)))
                goto exit_detach;

        data->hwmon_dev = hwmon_device_register(&new_client->dev);
        if (IS_ERR(data->hwmon_dev)) {
                err = PTR_ERR(data->hwmon_dev);
                goto exit_remove_files;
        }

        return 0;

exit_remove_files:
        sysfs_remove_group(&new_client->dev.kobj, &fscher_group);
exit_detach:
        i2c_detach_client(new_client);
exit_free:
        kfree(data);
exit:
        return err;
}

static int fscher_detach_client(struct i2c_client *client)
{
        struct fscher_data *data = i2c_get_clientdata(client);
        int err;

        hwmon_device_unregister(data->hwmon_dev);
        sysfs_remove_group(&client->dev.kobj, &fscher_group);

        if ((err = i2c_detach_client(client)))
                return err;

        kfree(data);
        return 0;
}

static int fscher_read_value(struct i2c_client *client, u8 reg)
{
        dev_dbg(&client->dev, "read reg 0x%02x\n", reg);

        return i2c_smbus_read_byte_data(client, reg);
}

static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value)
{
        dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n",
                reg, value);

        return i2c_smbus_write_byte_data(client, reg, value);
}

/* Called when we have found a new FSC Hermes. */
static void fscher_init_client(struct i2c_client *client)
{
        struct fscher_data *data = i2c_get_clientdata(client);

        /* Read revision from chip */
        data->revision =  fscher_read_value(client, FSCHER_REG_REVISION);
}

static struct fscher_data *fscher_update_device(struct device *dev)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct fscher_data *data = i2c_get_clientdata(client);

        mutex_lock(&data->update_lock);

        if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {

                dev_dbg(&client->dev, "Starting fscher update\n");

                data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT);
                data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT);
                data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT);
                data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE);
                data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE);
                data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE);

                data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12);
                data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5);
                data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT);

                data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT);
                data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT);
                data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT);
                data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE);
                data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE);
                data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE);
                data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN);
                data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN);
                data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN);
                data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE);
                data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE);
                data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE);

                data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET);
                data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE);
                data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL);

                data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE);
                data->global_control = fscher_read_value(client,
                                                        FSCHER_REG_CONTROL);

                data->last_updated = jiffies;
                data->valid = 1;                 
        }

        mutex_unlock(&data->update_lock);

        return data;
}



#define FAN_INDEX_FROM_NUM(nr)  ((nr) - 1)

static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data,
                              const char *buf, size_t count, int nr, int reg)
{
        /* bits 0..1, 3..7 reserved => mask with 0x04 */  
        unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04;
        
        mutex_lock(&data->update_lock);
        data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v;
        fscher_write_value(client, reg, v);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr)
{
        /* bits 0..1, 3..7 reserved => mask with 0x04 */  
        return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04);
}

static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
                       const char *buf, size_t count, int nr, int reg)
{
        unsigned long v = simple_strtoul(buf, NULL, 10);

        mutex_lock(&data->update_lock);
        data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v;
        fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr)
{
        return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
}

static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data,
                           const char *buf, size_t count, int nr, int reg)
{
        /* supported values: 2, 4, 8 */
        unsigned long v = simple_strtoul(buf, NULL, 10);

        switch (v) {
        case 2: v = 1; break;
        case 4: v = 2; break;
        case 8: v = 3; break;
        default:
                dev_err(&client->dev, "fan_div value %ld not "
                         "supported. Choose one of 2, 4 or 8!\n", v);
                return -EINVAL;
        }

        mutex_lock(&data->update_lock);

        /* bits 2..7 reserved => mask with 0x03 */
        data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03;
        data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v;

        fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr)
{
        /* bits 2..7 reserved => mask with 0x03 */  
        return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03));
}

#define RPM_FROM_REG(val)       (val*60)

static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr)
{
        return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)]));
}



#define TEMP_INDEX_FROM_NUM(nr)         ((nr) - 1)

static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data,
                               const char *buf, size_t count, int nr, int reg)
{
        /* bits 2..7 reserved, 0 read only => mask with 0x02 */  
        unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;

        mutex_lock(&data->update_lock);
        data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v;
        fscher_write_value(client, reg, v);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr)
{
        /* bits 2..7 reserved => mask with 0x03 */
        return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03);
}

#define TEMP_FROM_REG(val)      (((val) - 128) * 1000)

static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr)
{
        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)]));
}

/*
 * The final conversion is specified in sensors.conf, as it depends on
 * mainboard specific values. We export the registers contents as
 * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much
 * sense per se, but it minimizes the conversions count and keeps the
 * values within a usual range.
 */
#define VOLT_FROM_REG(val)      ((val) * 10)

static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr)
{
        return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr]));
}



static ssize_t show_revision(struct fscher_data *data, char *buf, int nr)
{
        return sprintf(buf, "%u\n", data->revision);
}



static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr)
{
        /* bits 2, 5..6 reserved => mask with 0x9b */
        return sprintf(buf, "%u\n", data->global_event & 0x9b);
}



static ssize_t set_control(struct i2c_client *client, struct fscher_data *data,
                           const char *buf, size_t count, int nr, int reg)
{
        /* bits 1..7 reserved => mask with 0x01 */  
        unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;

        mutex_lock(&data->update_lock);
        data->global_control = v;
        fscher_write_value(client, reg, v);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_control(struct fscher_data *data, char *buf, int nr)
{
        /* bits 1..7 reserved => mask with 0x01 */
        return sprintf(buf, "%u\n", data->global_control & 0x01);
}



static ssize_t set_watchdog_control(struct i2c_client *client, struct
                                    fscher_data *data, const char *buf, size_t count,
                                    int nr, int reg)
{
        /* bits 0..3 reserved => mask with 0xf0 */  
        unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;

        mutex_lock(&data->update_lock);
        data->watchdog[2] &= ~0xf0;
        data->watchdog[2] |= v;
        fscher_write_value(client, reg, data->watchdog[2]);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr)
{
        /* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */
        return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0);
}

static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data,
                                   const char *buf, size_t count, int nr, int reg)
{
        /* bits 0, 2..7 reserved => mask with 0x02 */  
        unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;

        mutex_lock(&data->update_lock);
        data->watchdog[1] &= ~v;
        fscher_write_value(client, reg, v);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr)
{
        /* bits 0, 2..7 reserved => mask with 0x02 */
        return sprintf(buf, "%u\n", data->watchdog[1] & 0x02);
}

static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data,
                                   const char *buf, size_t count, int nr, int reg)
{
        unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
        
        mutex_lock(&data->update_lock);
        data->watchdog[0] = v;
        fscher_write_value(client, reg, data->watchdog[0]);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr)
{
        return sprintf(buf, "%u\n", data->watchdog[0]);
}

static int __init sensors_fscher_init(void)
{
        return i2c_add_driver(&fscher_driver);
}

static void __exit sensors_fscher_exit(void)
{
        i2c_del_driver(&fscher_driver);
}

MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>");
MODULE_DESCRIPTION("FSC Hermes driver");
MODULE_LICENSE("GPL");

module_init(sensors_fscher_init);
module_exit(sensors_fscher_exit);