4 * Copyright (C) 1994-1996 Scott Snyder <snyder@fnald0.fnal.gov>
5 * Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
6 * Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
7 * Copyright (C) 2005, 2007 Bartlomiej Zolnierkiewicz
9 * May be copied or modified under the terms of the GNU General Public
10 * License. See linux/COPYING for more information.
12 * See Documentation/cdrom/ide-cd for usage information.
14 * Suggestions are welcome. Patches that work are more welcome though. ;-)
15 * For those wishing to work on this driver, please be sure you download
16 * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
17 * (SFF-8020i rev 2.6) standards. These documents can be obtained by
19 * ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps
20 * ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf
22 * For historical changelog please see:
23 * Documentation/ide/ChangeLog.ide-cd.1994-2004
26 #define DRV_NAME "ide-cd"
27 #define PFX DRV_NAME ": "
29 #define IDECD_VERSION "5.00"
31 #include <linux/module.h>
32 #include <linux/types.h>
33 #include <linux/kernel.h>
34 #include <linux/delay.h>
35 #include <linux/timer.h>
36 #include <linux/slab.h>
37 #include <linux/interrupt.h>
38 #include <linux/errno.h>
39 #include <linux/cdrom.h>
40 #include <linux/ide.h>
41 #include <linux/completion.h>
42 #include <linux/mutex.h>
43 #include <linux/bcd.h>
45 /* For SCSI -> ATAPI command conversion */
46 #include <scsi/scsi.h>
48 #include <linux/irq.h>
50 #include <asm/byteorder.h>
51 #include <linux/uaccess.h>
52 #include <asm/unaligned.h>
56 static DEFINE_MUTEX(idecd_ref_mutex
);
58 static void ide_cd_release(struct kref
*);
60 static struct cdrom_info
*ide_cd_get(struct gendisk
*disk
)
62 struct cdrom_info
*cd
= NULL
;
64 mutex_lock(&idecd_ref_mutex
);
65 cd
= ide_drv_g(disk
, cdrom_info
);
67 if (ide_device_get(cd
->drive
))
73 mutex_unlock(&idecd_ref_mutex
);
77 static void ide_cd_put(struct cdrom_info
*cd
)
79 ide_drive_t
*drive
= cd
->drive
;
81 mutex_lock(&idecd_ref_mutex
);
82 kref_put(&cd
->kref
, ide_cd_release
);
83 ide_device_put(drive
);
84 mutex_unlock(&idecd_ref_mutex
);
88 * Generic packet command support and error handling routines.
91 /* Mark that we've seen a media change and invalidate our internal buffers. */
92 static void cdrom_saw_media_change(ide_drive_t
*drive
)
94 drive
->dev_flags
|= IDE_DFLAG_MEDIA_CHANGED
;
95 drive
->atapi_flags
&= ~IDE_AFLAG_TOC_VALID
;
98 static int cdrom_log_sense(ide_drive_t
*drive
, struct request
*rq
,
99 struct request_sense
*sense
)
103 ide_debug_log(IDE_DBG_SENSE
, "Call %s, sense_key: 0x%x\n", __func__
,
106 if (!sense
|| !rq
|| (rq
->cmd_flags
& REQ_QUIET
))
109 switch (sense
->sense_key
) {
111 case RECOVERED_ERROR
:
115 * don't care about tray state messages for e.g. capacity
116 * commands or in-progress or becoming ready
118 if (sense
->asc
== 0x3a || sense
->asc
== 0x04)
122 case ILLEGAL_REQUEST
:
124 * don't log START_STOP unit with LoEj set, since we cannot
125 * reliably check if drive can auto-close
127 if (rq
->cmd
[0] == GPCMD_START_STOP_UNIT
&& sense
->asc
== 0x24)
133 * Make good and sure we've seen this potential media change.
134 * Some drives (i.e. Creative) fail to present the correct sense
135 * key in the error register.
137 cdrom_saw_media_change(drive
);
146 static void cdrom_analyze_sense_data(ide_drive_t
*drive
,
147 struct request
*failed_command
,
148 struct request_sense
*sense
)
150 unsigned long sector
;
151 unsigned long bio_sectors
;
152 struct cdrom_info
*info
= drive
->driver_data
;
154 ide_debug_log(IDE_DBG_SENSE
, "Call %s, error_code: 0x%x, "
155 "sense_key: 0x%x\n", __func__
, sense
->error_code
,
159 ide_debug_log(IDE_DBG_SENSE
, "%s: failed cmd: 0x%x\n",
160 __func__
, failed_command
->cmd
[0]);
162 if (!cdrom_log_sense(drive
, failed_command
, sense
))
166 * If a read toc is executed for a CD-R or CD-RW medium where the first
167 * toc has not been recorded yet, it will fail with 05/24/00 (which is a
170 if (failed_command
&& failed_command
->cmd
[0] == GPCMD_READ_TOC_PMA_ATIP
)
171 if (sense
->sense_key
== 0x05 && sense
->asc
== 0x24)
175 if (sense
->error_code
== 0x70) {
176 switch (sense
->sense_key
) {
178 case VOLUME_OVERFLOW
:
179 case ILLEGAL_REQUEST
:
182 if (failed_command
== NULL
||
183 !blk_fs_request(failed_command
))
185 sector
= (sense
->information
[0] << 24) |
186 (sense
->information
[1] << 16) |
187 (sense
->information
[2] << 8) |
188 (sense
->information
[3]);
190 if (drive
->queue
->hardsect_size
== 2048)
191 /* device sector size is 2K */
194 bio_sectors
= max(bio_sectors(failed_command
->bio
), 4U);
195 sector
&= ~(bio_sectors
- 1);
197 if (sector
< get_capacity(info
->disk
) &&
198 drive
->probed_capacity
- sector
< 4 * 75)
199 set_capacity(info
->disk
, sector
);
203 ide_cd_log_error(drive
->name
, failed_command
, sense
);
206 static void cdrom_queue_request_sense(ide_drive_t
*drive
, void *sense
,
207 struct request
*failed_command
)
209 struct cdrom_info
*info
= drive
->driver_data
;
210 struct request
*rq
= &info
->request_sense_request
;
212 ide_debug_log(IDE_DBG_SENSE
, "Call %s\n", __func__
);
215 sense
= &info
->sense_data
;
217 /* stuff the sense request in front of our current request */
218 blk_rq_init(NULL
, rq
);
219 rq
->cmd_type
= REQ_TYPE_ATA_PC
;
220 rq
->rq_disk
= info
->disk
;
223 rq
->cmd
[0] = GPCMD_REQUEST_SENSE
;
227 rq
->cmd_type
= REQ_TYPE_SENSE
;
228 rq
->cmd_flags
|= REQ_PREEMPT
;
230 /* NOTE! Save the failed command in "rq->buffer" */
231 rq
->buffer
= (void *) failed_command
;
234 ide_debug_log(IDE_DBG_SENSE
, "failed_cmd: 0x%x\n",
235 failed_command
->cmd
[0]);
237 ide_do_drive_cmd(drive
, rq
);
240 static void cdrom_end_request(ide_drive_t
*drive
, int uptodate
)
242 struct request
*rq
= HWGROUP(drive
)->rq
;
243 int nsectors
= rq
->hard_cur_sectors
;
245 ide_debug_log(IDE_DBG_FUNC
, "Call %s, cmd: 0x%x, uptodate: 0x%x, "
246 "nsectors: %d\n", __func__
, rq
->cmd
[0], uptodate
,
249 if (blk_sense_request(rq
) && uptodate
) {
251 * For REQ_TYPE_SENSE, "rq->buffer" points to the original
254 struct request
*failed
= (struct request
*) rq
->buffer
;
255 struct cdrom_info
*info
= drive
->driver_data
;
256 void *sense
= &info
->sense_data
;
260 sense
= failed
->sense
;
261 failed
->sense_len
= rq
->sense_len
;
263 cdrom_analyze_sense_data(drive
, failed
, sense
);
265 * now end the failed request
267 if (blk_fs_request(failed
)) {
268 if (ide_end_dequeued_request(drive
, failed
, 0,
269 failed
->hard_nr_sectors
))
272 if (blk_end_request(failed
, -EIO
,
277 cdrom_analyze_sense_data(drive
, NULL
, sense
);
280 if (!rq
->current_nr_sectors
&& blk_fs_request(rq
))
282 /* make sure it's fully ended */
283 if (blk_pc_request(rq
))
284 nsectors
= (rq
->data_len
+ 511) >> 9;
288 ide_debug_log(IDE_DBG_FUNC
, "Exit %s, uptodate: 0x%x, nsectors: %d\n",
289 __func__
, uptodate
, nsectors
);
291 ide_end_request(drive
, uptodate
, nsectors
);
294 static void ide_dump_status_no_sense(ide_drive_t
*drive
, const char *msg
, u8 st
)
298 ide_dump_status(drive
, msg
, st
);
303 * 0: if the request should be continued.
304 * 1: if the request was ended.
306 static int cdrom_decode_status(ide_drive_t
*drive
, int good_stat
, int *stat_ret
)
308 ide_hwif_t
*hwif
= drive
->hwif
;
309 ide_hwgroup_t
*hwgroup
= hwif
->hwgroup
;
310 struct request
*rq
= hwgroup
->rq
;
311 int stat
, err
, sense_key
;
313 /* check for errors */
314 stat
= hwif
->tp_ops
->read_status(hwif
);
319 if (OK_STAT(stat
, good_stat
, BAD_R_STAT
))
322 /* get the IDE error register */
323 err
= ide_read_error(drive
);
324 sense_key
= err
>> 4;
327 printk(KERN_ERR PFX
"%s: missing rq in %s\n",
328 drive
->name
, __func__
);
332 ide_debug_log(IDE_DBG_RQ
, "%s: stat: 0x%x, good_stat: 0x%x, "
333 "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x, err: 0x%x\n",
334 __func__
, stat
, good_stat
, rq
->cmd
[0], rq
->cmd_type
, err
);
336 if (blk_sense_request(rq
)) {
338 * We got an error trying to get sense info from the drive
339 * (probably while trying to recover from a former error).
342 rq
->cmd_flags
|= REQ_FAILED
;
343 cdrom_end_request(drive
, 0);
344 ide_error(drive
, "request sense failure", stat
);
347 } else if (blk_pc_request(rq
) || rq
->cmd_type
== REQ_TYPE_ATA_PC
) {
348 /* All other functions, except for READ. */
351 * if we have an error, pass back CHECK_CONDITION as the
354 if (blk_pc_request(rq
) && !rq
->errors
)
355 rq
->errors
= SAM_STAT_CHECK_CONDITION
;
357 /* check for tray open */
358 if (sense_key
== NOT_READY
) {
359 cdrom_saw_media_change(drive
);
360 } else if (sense_key
== UNIT_ATTENTION
) {
361 /* check for media change */
362 cdrom_saw_media_change(drive
);
364 } else if (sense_key
== ILLEGAL_REQUEST
&&
365 rq
->cmd
[0] == GPCMD_START_STOP_UNIT
) {
367 * Don't print error message for this condition--
368 * SFF8090i indicates that 5/24/00 is the correct
369 * response to a request to close the tray if the
370 * drive doesn't have that capability.
371 * cdrom_log_sense() knows this!
373 } else if (!(rq
->cmd_flags
& REQ_QUIET
)) {
374 /* otherwise, print an error */
375 ide_dump_status(drive
, "packet command error", stat
);
378 rq
->cmd_flags
|= REQ_FAILED
;
381 * instead of playing games with moving completions around,
382 * remove failed request completely and end it when the
383 * request sense has completed
387 } else if (blk_fs_request(rq
)) {
388 int do_end_request
= 0;
390 /* handle errors from READ and WRITE requests */
392 if (blk_noretry_request(rq
))
395 if (sense_key
== NOT_READY
) {
397 if (rq_data_dir(rq
) == READ
) {
398 cdrom_saw_media_change(drive
);
400 /* fail the request */
401 printk(KERN_ERR PFX
"%s: tray open\n",
405 struct cdrom_info
*info
= drive
->driver_data
;
408 * Allow the drive 5 seconds to recover, some
409 * devices will return this error while flushing
413 info
->write_timeout
= jiffies
+
414 ATAPI_WAIT_WRITE_BUSY
;
416 if (time_after(jiffies
, info
->write_timeout
))
419 struct request_queue
*q
= drive
->queue
;
423 * take a breather relying on the unplug
424 * timer to kick us again
426 spin_lock_irqsave(q
->queue_lock
, flags
);
428 spin_unlock_irqrestore(q
->queue_lock
, flags
);
433 } else if (sense_key
== UNIT_ATTENTION
) {
435 cdrom_saw_media_change(drive
);
438 * Arrange to retry the request but be sure to give up
439 * if we've retried too many times.
441 if (++rq
->errors
> ERROR_MAX
)
443 } else if (sense_key
== ILLEGAL_REQUEST
||
444 sense_key
== DATA_PROTECT
) {
446 * No point in retrying after an illegal request or data
449 ide_dump_status_no_sense(drive
, "command error", stat
);
451 } else if (sense_key
== MEDIUM_ERROR
) {
453 * No point in re-trying a zillion times on a bad
454 * sector. If we got here the error is not correctable.
456 ide_dump_status_no_sense(drive
,
457 "media error (bad sector)",
460 } else if (sense_key
== BLANK_CHECK
) {
461 /* disk appears blank ?? */
462 ide_dump_status_no_sense(drive
, "media error (blank)",
465 } else if ((err
& ~ATA_ABORTED
) != 0) {
466 /* go to the default handler for other errors */
467 ide_error(drive
, "cdrom_decode_status", stat
);
469 } else if ((++rq
->errors
> ERROR_MAX
)) {
470 /* we've racked up too many retries, abort */
475 * End a request through request sense analysis when we have
476 * sense data. We need this in order to perform end of media
483 * If we got a CHECK_CONDITION status, queue
484 * a request sense command.
487 cdrom_queue_request_sense(drive
, NULL
, NULL
);
489 blk_dump_rq_flags(rq
, PFX
"bad rq");
490 cdrom_end_request(drive
, 0);
493 /* retry, or handle the next request */
497 if (stat
& ATA_ERR
) {
498 struct request_queue
*q
= drive
->queue
;
501 spin_lock_irqsave(q
->queue_lock
, flags
);
502 blkdev_dequeue_request(rq
);
503 spin_unlock_irqrestore(q
->queue_lock
, flags
);
507 cdrom_queue_request_sense(drive
, rq
->sense
, rq
);
509 cdrom_end_request(drive
, 0);
514 static ide_startstop_t
cdrom_transfer_packet_command(ide_drive_t
*);
515 static ide_startstop_t
cdrom_newpc_intr(ide_drive_t
*);
518 * Set up the device registers for transferring a packet command on DEV,
519 * expecting to later transfer XFERLEN bytes. HANDLER is the routine
520 * which actually transfers the command to the drive. If this is a
521 * drq_interrupt device, this routine will arrange for HANDLER to be
522 * called when the interrupt from the drive arrives. Otherwise, HANDLER
523 * will be called immediately after the drive is prepared for the transfer.
525 static ide_startstop_t
cdrom_start_packet_command(ide_drive_t
*drive
)
527 ide_hwif_t
*hwif
= drive
->hwif
;
528 struct request
*rq
= hwif
->hwgroup
->rq
;
531 xferlen
= ide_cd_get_xferlen(rq
);
533 ide_debug_log(IDE_DBG_PC
, "Call %s, xferlen: %d\n", __func__
, xferlen
);
535 /* FIXME: for Virtual DMA we must check harder */
537 drive
->dma
= !hwif
->dma_ops
->dma_setup(drive
);
539 /* set up the controller registers */
540 ide_pktcmd_tf_load(drive
, IDE_TFLAG_OUT_NSECT
| IDE_TFLAG_OUT_LBAL
,
541 xferlen
, drive
->dma
);
543 if (drive
->atapi_flags
& IDE_AFLAG_DRQ_INTERRUPT
) {
544 /* waiting for CDB interrupt, not DMA yet. */
546 drive
->waiting_for_dma
= 0;
549 ide_execute_command(drive
, ATA_CMD_PACKET
,
550 cdrom_transfer_packet_command
,
551 ATAPI_WAIT_PC
, ide_cd_expiry
);
554 ide_execute_pkt_cmd(drive
);
556 return cdrom_transfer_packet_command(drive
);
561 * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
562 * registers must have already been prepared by cdrom_start_packet_command.
563 * HANDLER is the interrupt handler to call when the command completes or
564 * there's data ready.
566 #define ATAPI_MIN_CDB_BYTES 12
567 static ide_startstop_t
cdrom_transfer_packet_command(ide_drive_t
*drive
)
569 ide_hwif_t
*hwif
= drive
->hwif
;
570 struct request
*rq
= hwif
->hwgroup
->rq
;
572 ide_startstop_t startstop
;
574 ide_debug_log(IDE_DBG_PC
, "Call %s\n", __func__
);
576 if (drive
->atapi_flags
& IDE_AFLAG_DRQ_INTERRUPT
) {
578 * Here we should have been called after receiving an interrupt
579 * from the device. DRQ should how be set.
582 /* check for errors */
583 if (cdrom_decode_status(drive
, ATA_DRQ
, NULL
))
586 /* ok, next interrupt will be DMA interrupt */
588 drive
->waiting_for_dma
= 1;
590 /* otherwise, we must wait for DRQ to get set */
591 if (ide_wait_stat(&startstop
, drive
, ATA_DRQ
,
592 ATA_BUSY
, WAIT_READY
))
596 /* arm the interrupt handler */
597 ide_set_handler(drive
, cdrom_newpc_intr
, rq
->timeout
, ide_cd_expiry
);
599 /* ATAPI commands get padded out to 12 bytes minimum */
600 cmd_len
= COMMAND_SIZE(rq
->cmd
[0]);
601 if (cmd_len
< ATAPI_MIN_CDB_BYTES
)
602 cmd_len
= ATAPI_MIN_CDB_BYTES
;
604 /* send the command to the device */
605 hwif
->tp_ops
->output_data(drive
, NULL
, rq
->cmd
, cmd_len
);
607 /* start the DMA if need be */
609 hwif
->dma_ops
->dma_start(drive
);
615 * Check the contents of the interrupt reason register from the cdrom
616 * and attempt to recover if there are problems. Returns 0 if everything's
617 * ok; nonzero if the request has been terminated.
619 static int ide_cd_check_ireason(ide_drive_t
*drive
, struct request
*rq
,
620 int len
, int ireason
, int rw
)
622 ide_hwif_t
*hwif
= drive
->hwif
;
624 ide_debug_log(IDE_DBG_FUNC
, "Call %s, ireason: 0x%x, rw: 0x%x\n",
625 __func__
, ireason
, rw
);
628 * ireason == 0: the drive wants to receive data from us
629 * ireason == 2: the drive is expecting to transfer data to us
631 if (ireason
== (!rw
<< 1))
633 else if (ireason
== (rw
<< 1)) {
636 printk(KERN_ERR PFX
"%s: %s: wrong transfer direction!\n",
637 drive
->name
, __func__
);
639 ide_pad_transfer(drive
, rw
, len
);
640 } else if (rw
== 0 && ireason
== 1) {
642 * Some drives (ASUS) seem to tell us that status info is
643 * available. Just get it and ignore.
645 (void)hwif
->tp_ops
->read_status(hwif
);
648 /* drive wants a command packet, or invalid ireason... */
649 printk(KERN_ERR PFX
"%s: %s: bad interrupt reason 0x%02x\n",
650 drive
->name
, __func__
, ireason
);
653 if (rq
->cmd_type
== REQ_TYPE_ATA_PC
)
654 rq
->cmd_flags
|= REQ_FAILED
;
656 cdrom_end_request(drive
, 0);
661 * Assume that the drive will always provide data in multiples of at least
662 * SECTOR_SIZE, as it gets hairy to keep track of the transfers otherwise.
664 static int ide_cd_check_transfer_size(ide_drive_t
*drive
, int len
)
666 ide_debug_log(IDE_DBG_FUNC
, "Call %s, len: %d\n", __func__
, len
);
668 if ((len
% SECTOR_SIZE
) == 0)
671 printk(KERN_ERR PFX
"%s: %s: Bad transfer size %d\n", drive
->name
,
674 if (drive
->atapi_flags
& IDE_AFLAG_LIMIT_NFRAMES
)
675 printk(KERN_ERR PFX
"This drive is not supported by this "
676 "version of the driver\n");
678 printk(KERN_ERR PFX
"Trying to limit transfer sizes\n");
679 drive
->atapi_flags
|= IDE_AFLAG_LIMIT_NFRAMES
;
685 static ide_startstop_t
ide_cd_prepare_rw_request(ide_drive_t
*drive
,
688 ide_debug_log(IDE_DBG_RQ
, "Call %s: rq->cmd_flags: 0x%x\n", __func__
,
691 if (rq_data_dir(rq
) == READ
) {
692 unsigned short sectors_per_frame
=
693 queue_hardsect_size(drive
->queue
) >> SECTOR_BITS
;
694 int nskip
= rq
->sector
& (sectors_per_frame
- 1);
697 * If the requested sector doesn't start on a frame boundary,
698 * we must adjust the start of the transfer so that it does,
699 * and remember to skip the first few sectors.
701 * If the rq->current_nr_sectors field is larger than the size
702 * of the buffer, it will mean that we're to skip a number of
703 * sectors equal to the amount by which rq->current_nr_sectors
704 * is larger than the buffer size.
707 /* sanity check... */
708 if (rq
->current_nr_sectors
!=
709 bio_cur_sectors(rq
->bio
)) {
710 printk(KERN_ERR PFX
"%s: %s: buffer botch (%u)\n",
711 drive
->name
, __func__
,
712 rq
->current_nr_sectors
);
713 cdrom_end_request(drive
, 0);
716 rq
->current_nr_sectors
+= nskip
;
720 /* set up the command */
721 rq
->timeout
= ATAPI_WAIT_PC
;
727 * Fix up a possibly partially-processed request so that we can start it over
728 * entirely, or even put it back on the request queue.
730 static void ide_cd_restore_request(ide_drive_t
*drive
, struct request
*rq
)
733 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
735 if (rq
->buffer
!= bio_data(rq
->bio
)) {
737 (rq
->buffer
- (char *)bio_data(rq
->bio
)) / SECTOR_SIZE
;
739 rq
->buffer
= bio_data(rq
->bio
);
743 rq
->current_nr_sectors
= bio_cur_sectors(rq
->bio
);
744 rq
->hard_cur_sectors
= rq
->current_nr_sectors
;
745 rq
->hard_nr_sectors
= rq
->nr_sectors
;
746 rq
->hard_sector
= rq
->sector
;
747 rq
->q
->prep_rq_fn(rq
->q
, rq
);
750 static void ide_cd_request_sense_fixup(ide_drive_t
*drive
, struct request
*rq
)
752 ide_debug_log(IDE_DBG_FUNC
, "Call %s, rq->cmd[0]: 0x%x\n",
753 __func__
, rq
->cmd
[0]);
756 * Some of the trailing request sense fields are optional,
757 * and some drives don't send them. Sigh.
759 if (rq
->cmd
[0] == GPCMD_REQUEST_SENSE
&&
760 rq
->data_len
> 0 && rq
->data_len
<= 5)
761 while (rq
->data_len
> 0) {
762 *(u8
*)rq
->data
++ = 0;
767 int ide_cd_queue_pc(ide_drive_t
*drive
, const unsigned char *cmd
,
768 int write
, void *buffer
, unsigned *bufflen
,
769 struct request_sense
*sense
, int timeout
,
770 unsigned int cmd_flags
)
772 struct cdrom_info
*info
= drive
->driver_data
;
773 struct request_sense local_sense
;
775 unsigned int flags
= 0;
778 sense
= &local_sense
;
780 ide_debug_log(IDE_DBG_PC
, "Call %s, cmd[0]: 0x%x, write: 0x%x, "
781 "timeout: %d, cmd_flags: 0x%x\n", __func__
, cmd
[0], write
,
784 /* start of retry loop */
789 rq
= blk_get_request(drive
->queue
, write
, __GFP_WAIT
);
791 memcpy(rq
->cmd
, cmd
, BLK_MAX_CDB
);
792 rq
->cmd_type
= REQ_TYPE_ATA_PC
;
794 rq
->cmd_flags
|= cmd_flags
;
795 rq
->timeout
= timeout
;
798 rq
->data_len
= *bufflen
;
801 error
= blk_execute_rq(drive
->queue
, info
->disk
, rq
, 0);
804 *bufflen
= rq
->data_len
;
806 flags
= rq
->cmd_flags
;
810 * FIXME: we should probably abort/retry or something in case of
813 if (flags
& REQ_FAILED
) {
815 * The request failed. Retry if it was due to a unit
816 * attention status (usually means media was changed).
818 struct request_sense
*reqbuf
= sense
;
820 if (reqbuf
->sense_key
== UNIT_ATTENTION
)
821 cdrom_saw_media_change(drive
);
822 else if (reqbuf
->sense_key
== NOT_READY
&&
823 reqbuf
->asc
== 4 && reqbuf
->ascq
!= 4) {
825 * The drive is in the process of loading
826 * a disk. Retry, but wait a little to give
827 * the drive time to complete the load.
831 /* otherwise, don't retry */
837 /* end of retry loop */
838 } while ((flags
& REQ_FAILED
) && retries
>= 0);
840 /* return an error if the command failed */
841 return (flags
& REQ_FAILED
) ? -EIO
: 0;
845 * Called from blk_end_request_callback() after the data of the request is
846 * completed and before the request itself is completed. By returning value '1',
847 * blk_end_request_callback() returns immediately without completing it.
849 static int cdrom_newpc_intr_dummy_cb(struct request
*rq
)
854 static ide_startstop_t
cdrom_newpc_intr(ide_drive_t
*drive
)
856 ide_hwif_t
*hwif
= drive
->hwif
;
857 ide_hwgroup_t
*hwgroup
= hwif
->hwgroup
;
858 struct request
*rq
= hwgroup
->rq
;
859 xfer_func_t
*xferfunc
;
860 ide_expiry_t
*expiry
= NULL
;
861 int dma_error
= 0, dma
, stat
, thislen
, uptodate
= 0;
862 int write
= (rq_data_dir(rq
) == WRITE
) ? 1 : 0;
863 unsigned int timeout
;
867 ide_debug_log(IDE_DBG_PC
, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x\n",
868 __func__
, rq
->cmd
[0], write
);
870 /* check for errors */
874 dma_error
= hwif
->dma_ops
->dma_end(drive
);
876 printk(KERN_ERR PFX
"%s: DMA %s error\n", drive
->name
,
877 write
? "write" : "read");
882 if (cdrom_decode_status(drive
, 0, &stat
))
885 /* using dma, transfer is complete now */
888 return ide_error(drive
, "dma error", stat
);
889 if (blk_fs_request(rq
)) {
890 ide_end_request(drive
, 1, rq
->nr_sectors
);
896 ide_read_bcount_and_ireason(drive
, &len
, &ireason
);
898 thislen
= blk_fs_request(rq
) ? len
: rq
->data_len
;
902 ide_debug_log(IDE_DBG_PC
, "%s: DRQ: stat: 0x%x, thislen: %d\n",
903 __func__
, stat
, thislen
);
905 /* If DRQ is clear, the command has completed. */
906 if ((stat
& ATA_DRQ
) == 0) {
907 if (blk_fs_request(rq
)) {
909 * If we're not done reading/writing, complain.
910 * Otherwise, complete the command normally.
913 if (rq
->current_nr_sectors
> 0) {
914 printk(KERN_ERR PFX
"%s: %s: data underrun "
916 drive
->name
, __func__
,
917 rq
->current_nr_sectors
);
919 rq
->cmd_flags
|= REQ_FAILED
;
922 cdrom_end_request(drive
, uptodate
);
924 } else if (!blk_pc_request(rq
)) {
925 ide_cd_request_sense_fixup(drive
, rq
);
926 /* complain if we still have data left to transfer */
927 uptodate
= rq
->data_len
? 0 : 1;
932 /* check which way to transfer data */
933 if (ide_cd_check_ireason(drive
, rq
, len
, ireason
, write
))
936 if (blk_fs_request(rq
)) {
940 if (ide_cd_check_transfer_size(drive
, len
)) {
941 cdrom_end_request(drive
, 0);
946 * First, figure out if we need to bit-bucket
947 * any of the leading sectors.
949 nskip
= min_t(int, rq
->current_nr_sectors
950 - bio_cur_sectors(rq
->bio
),
953 ide_pad_transfer(drive
, write
, nskip
<< 9);
954 rq
->current_nr_sectors
-= nskip
;
955 thislen
-= (nskip
<< 9);
962 xferfunc
= hwif
->tp_ops
->output_data
;
965 xferfunc
= hwif
->tp_ops
->input_data
;
968 ide_debug_log(IDE_DBG_PC
, "%s: data transfer, rq->cmd_type: 0x%x, "
969 "ireason: 0x%x\n", __func__
, rq
->cmd_type
, ireason
);
972 while (thislen
> 0) {
973 u8
*ptr
= blk_fs_request(rq
) ? NULL
: rq
->data
;
974 int blen
= rq
->data_len
;
978 if (blk_fs_request(rq
)) {
980 blen
= rq
->current_nr_sectors
<< 9;
982 ptr
= bio_data(rq
->bio
);
983 blen
= bio_iovec(rq
->bio
)->bv_len
;
988 if (blk_fs_request(rq
) && !write
)
990 * If the buffers are full, pipe the rest into
993 ide_pad_transfer(drive
, 0, thislen
);
995 printk(KERN_ERR PFX
"%s: confused, missing data\n",
997 blk_dump_rq_flags(rq
, rq_data_dir(rq
)
998 ? "cdrom_newpc_intr, write"
999 : "cdrom_newpc_intr, read");
1007 xferfunc(drive
, NULL
, ptr
, blen
);
1012 if (blk_fs_request(rq
)) {
1014 rq
->nr_sectors
-= (blen
>> 9);
1015 rq
->current_nr_sectors
-= (blen
>> 9);
1016 rq
->sector
+= (blen
>> 9);
1018 if (rq
->current_nr_sectors
== 0 && rq
->nr_sectors
)
1019 cdrom_end_request(drive
, 1);
1021 rq
->data_len
-= blen
;
1024 * The request can't be completed until DRQ is cleared.
1025 * So complete the data, but don't complete the request
1026 * using the dummy function for the callback feature
1027 * of blk_end_request_callback().
1030 blk_end_request_callback(rq
, 0, blen
,
1031 cdrom_newpc_intr_dummy_cb
);
1035 if (!write
&& blk_sense_request(rq
))
1036 rq
->sense_len
+= blen
;
1039 /* pad, if necessary */
1040 if (!blk_fs_request(rq
) && len
> 0)
1041 ide_pad_transfer(drive
, write
, len
);
1043 if (blk_pc_request(rq
)) {
1044 timeout
= rq
->timeout
;
1046 timeout
= ATAPI_WAIT_PC
;
1047 if (!blk_fs_request(rq
))
1048 expiry
= ide_cd_expiry
;
1051 ide_set_handler(drive
, cdrom_newpc_intr
, timeout
, expiry
);
1055 if (blk_pc_request(rq
)) {
1056 unsigned int dlen
= rq
->data_len
;
1061 if (blk_end_request(rq
, 0, dlen
))
1067 rq
->cmd_flags
|= REQ_FAILED
;
1068 cdrom_end_request(drive
, uptodate
);
1073 static ide_startstop_t
cdrom_start_rw(ide_drive_t
*drive
, struct request
*rq
)
1075 struct cdrom_info
*cd
= drive
->driver_data
;
1076 int write
= rq_data_dir(rq
) == WRITE
;
1077 unsigned short sectors_per_frame
=
1078 queue_hardsect_size(drive
->queue
) >> SECTOR_BITS
;
1080 ide_debug_log(IDE_DBG_RQ
, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, "
1081 "secs_per_frame: %u\n",
1082 __func__
, rq
->cmd
[0], write
, sectors_per_frame
);
1085 /* disk has become write protected */
1086 if (get_disk_ro(cd
->disk
)) {
1087 cdrom_end_request(drive
, 0);
1092 * We may be retrying this request after an error. Fix up any
1093 * weirdness which might be present in the request packet.
1095 ide_cd_restore_request(drive
, rq
);
1098 /* use DMA, if possible / writes *must* be hardware frame aligned */
1099 if ((rq
->nr_sectors
& (sectors_per_frame
- 1)) ||
1100 (rq
->sector
& (sectors_per_frame
- 1))) {
1102 cdrom_end_request(drive
, 0);
1107 drive
->dma
= !!(drive
->dev_flags
& IDE_DFLAG_USING_DMA
);
1110 cd
->devinfo
.media_written
= 1;
1115 static void cdrom_do_block_pc(ide_drive_t
*drive
, struct request
*rq
)
1118 ide_debug_log(IDE_DBG_PC
, "Call %s, rq->cmd[0]: 0x%x, "
1119 "rq->cmd_type: 0x%x\n", __func__
, rq
->cmd
[0],
1122 if (blk_pc_request(rq
))
1123 rq
->cmd_flags
|= REQ_QUIET
;
1125 rq
->cmd_flags
&= ~REQ_FAILED
;
1130 if (rq
->bio
|| ((rq
->cmd_type
== REQ_TYPE_ATA_PC
) && rq
->data_len
)) {
1131 struct request_queue
*q
= drive
->queue
;
1132 unsigned int alignment
;
1136 buf
= bio_data(rq
->bio
);
1140 drive
->dma
= !!(drive
->dev_flags
& IDE_DFLAG_USING_DMA
);
1143 * check if dma is safe
1145 * NOTE! The "len" and "addr" checks should possibly have
1148 alignment
= queue_dma_alignment(q
) | q
->dma_pad_mask
;
1149 if ((unsigned long)buf
& alignment
1150 || rq
->data_len
& q
->dma_pad_mask
1151 || object_is_on_stack(buf
))
1156 static ide_startstop_t
ide_cd_do_request(ide_drive_t
*drive
, struct request
*rq
,
1159 ide_debug_log(IDE_DBG_RQ
, "Call %s, rq->cmd[0]: 0x%x, "
1160 "rq->cmd_type: 0x%x, block: %llu\n",
1161 __func__
, rq
->cmd
[0], rq
->cmd_type
,
1162 (unsigned long long)block
);
1164 if (blk_fs_request(rq
)) {
1165 if (cdrom_start_rw(drive
, rq
) == ide_stopped
)
1168 if (ide_cd_prepare_rw_request(drive
, rq
) == ide_stopped
)
1170 } else if (blk_sense_request(rq
) || blk_pc_request(rq
) ||
1171 rq
->cmd_type
== REQ_TYPE_ATA_PC
) {
1173 rq
->timeout
= ATAPI_WAIT_PC
;
1175 cdrom_do_block_pc(drive
, rq
);
1176 } else if (blk_special_request(rq
)) {
1177 /* right now this can only be a reset... */
1178 cdrom_end_request(drive
, 1);
1181 blk_dump_rq_flags(rq
, DRV_NAME
" bad flags");
1182 cdrom_end_request(drive
, 0);
1186 return cdrom_start_packet_command(drive
);
1192 * Routines which queue packet commands take as a final argument a pointer to a
1193 * request_sense struct. If execution of the command results in an error with a
1194 * CHECK CONDITION status, this structure will be filled with the results of the
1195 * subsequent request sense command. The pointer can also be NULL, in which case
1196 * no sense information is returned.
1198 static void msf_from_bcd(struct atapi_msf
*msf
)
1200 msf
->minute
= bcd2bin(msf
->minute
);
1201 msf
->second
= bcd2bin(msf
->second
);
1202 msf
->frame
= bcd2bin(msf
->frame
);
1205 int cdrom_check_status(ide_drive_t
*drive
, struct request_sense
*sense
)
1207 struct cdrom_info
*info
= drive
->driver_data
;
1208 struct cdrom_device_info
*cdi
= &info
->devinfo
;
1209 unsigned char cmd
[BLK_MAX_CDB
];
1211 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
1213 memset(cmd
, 0, BLK_MAX_CDB
);
1214 cmd
[0] = GPCMD_TEST_UNIT_READY
;
1217 * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs
1218 * instead of supporting the LOAD_UNLOAD opcode.
1220 cmd
[7] = cdi
->sanyo_slot
% 3;
1222 return ide_cd_queue_pc(drive
, cmd
, 0, NULL
, NULL
, sense
, 0, REQ_QUIET
);
1225 static int cdrom_read_capacity(ide_drive_t
*drive
, unsigned long *capacity
,
1226 unsigned long *sectors_per_frame
,
1227 struct request_sense
*sense
)
1235 unsigned char cmd
[BLK_MAX_CDB
];
1236 unsigned len
= sizeof(capbuf
);
1239 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
1241 memset(cmd
, 0, BLK_MAX_CDB
);
1242 cmd
[0] = GPCMD_READ_CDVD_CAPACITY
;
1244 stat
= ide_cd_queue_pc(drive
, cmd
, 0, &capbuf
, &len
, sense
, 0,
1250 * Sanity check the given block size
1252 blocklen
= be32_to_cpu(capbuf
.blocklen
);
1260 printk(KERN_ERR PFX
"%s: weird block size %u\n",
1261 drive
->name
, blocklen
);
1262 printk(KERN_ERR PFX
"%s: default to 2kb block size\n",
1268 *capacity
= 1 + be32_to_cpu(capbuf
.lba
);
1269 *sectors_per_frame
= blocklen
>> SECTOR_BITS
;
1271 ide_debug_log(IDE_DBG_PROBE
, "%s: cap: %lu, sectors_per_frame: %lu\n",
1272 __func__
, *capacity
, *sectors_per_frame
);
1277 static int cdrom_read_tocentry(ide_drive_t
*drive
, int trackno
, int msf_flag
,
1278 int format
, char *buf
, int buflen
,
1279 struct request_sense
*sense
)
1281 unsigned char cmd
[BLK_MAX_CDB
];
1283 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
1285 memset(cmd
, 0, BLK_MAX_CDB
);
1287 cmd
[0] = GPCMD_READ_TOC_PMA_ATIP
;
1289 cmd
[7] = (buflen
>> 8);
1290 cmd
[8] = (buflen
& 0xff);
1291 cmd
[9] = (format
<< 6);
1296 return ide_cd_queue_pc(drive
, cmd
, 0, buf
, &buflen
, sense
, 0, REQ_QUIET
);
1299 /* Try to read the entire TOC for the disk into our internal buffer. */
1300 int ide_cd_read_toc(ide_drive_t
*drive
, struct request_sense
*sense
)
1302 int stat
, ntracks
, i
;
1303 struct cdrom_info
*info
= drive
->driver_data
;
1304 struct cdrom_device_info
*cdi
= &info
->devinfo
;
1305 struct atapi_toc
*toc
= info
->toc
;
1307 struct atapi_toc_header hdr
;
1308 struct atapi_toc_entry ent
;
1311 unsigned long sectors_per_frame
= SECTORS_PER_FRAME
;
1313 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
1316 /* try to allocate space */
1317 toc
= kmalloc(sizeof(struct atapi_toc
), GFP_KERNEL
);
1319 printk(KERN_ERR PFX
"%s: No cdrom TOC buffer!\n",
1327 * Check to see if the existing data is still valid. If it is,
1330 (void) cdrom_check_status(drive
, sense
);
1332 if (drive
->atapi_flags
& IDE_AFLAG_TOC_VALID
)
1335 /* try to get the total cdrom capacity and sector size */
1336 stat
= cdrom_read_capacity(drive
, &toc
->capacity
, §ors_per_frame
,
1339 toc
->capacity
= 0x1fffff;
1341 set_capacity(info
->disk
, toc
->capacity
* sectors_per_frame
);
1342 /* save a private copy of the TOC capacity for error handling */
1343 drive
->probed_capacity
= toc
->capacity
* sectors_per_frame
;
1345 blk_queue_hardsect_size(drive
->queue
,
1346 sectors_per_frame
<< SECTOR_BITS
);
1348 /* first read just the header, so we know how long the TOC is */
1349 stat
= cdrom_read_tocentry(drive
, 0, 1, 0, (char *) &toc
->hdr
,
1350 sizeof(struct atapi_toc_header
), sense
);
1354 if (drive
->atapi_flags
& IDE_AFLAG_TOCTRACKS_AS_BCD
) {
1355 toc
->hdr
.first_track
= bcd2bin(toc
->hdr
.first_track
);
1356 toc
->hdr
.last_track
= bcd2bin(toc
->hdr
.last_track
);
1359 ntracks
= toc
->hdr
.last_track
- toc
->hdr
.first_track
+ 1;
1362 if (ntracks
> MAX_TRACKS
)
1363 ntracks
= MAX_TRACKS
;
1365 /* now read the whole schmeer */
1366 stat
= cdrom_read_tocentry(drive
, toc
->hdr
.first_track
, 1, 0,
1368 sizeof(struct atapi_toc_header
) +
1370 sizeof(struct atapi_toc_entry
), sense
);
1372 if (stat
&& toc
->hdr
.first_track
> 1) {
1374 * Cds with CDI tracks only don't have any TOC entries, despite
1375 * of this the returned values are
1376 * first_track == last_track = number of CDI tracks + 1,
1377 * so that this case is indistinguishable from the same layout
1378 * plus an additional audio track. If we get an error for the
1379 * regular case, we assume a CDI without additional audio
1380 * tracks. In this case the readable TOC is empty (CDI tracks
1381 * are not included) and only holds the Leadout entry.
1386 stat
= cdrom_read_tocentry(drive
, CDROM_LEADOUT
, 1, 0,
1388 sizeof(struct atapi_toc_header
) +
1390 sizeof(struct atapi_toc_entry
),
1395 if (drive
->atapi_flags
& IDE_AFLAG_TOCTRACKS_AS_BCD
) {
1396 toc
->hdr
.first_track
= (u8
)bin2bcd(CDROM_LEADOUT
);
1397 toc
->hdr
.last_track
= (u8
)bin2bcd(CDROM_LEADOUT
);
1399 toc
->hdr
.first_track
= CDROM_LEADOUT
;
1400 toc
->hdr
.last_track
= CDROM_LEADOUT
;
1407 toc
->hdr
.toc_length
= be16_to_cpu(toc
->hdr
.toc_length
);
1409 if (drive
->atapi_flags
& IDE_AFLAG_TOCTRACKS_AS_BCD
) {
1410 toc
->hdr
.first_track
= bcd2bin(toc
->hdr
.first_track
);
1411 toc
->hdr
.last_track
= bcd2bin(toc
->hdr
.last_track
);
1414 for (i
= 0; i
<= ntracks
; i
++) {
1415 if (drive
->atapi_flags
& IDE_AFLAG_TOCADDR_AS_BCD
) {
1416 if (drive
->atapi_flags
& IDE_AFLAG_TOCTRACKS_AS_BCD
)
1417 toc
->ent
[i
].track
= bcd2bin(toc
->ent
[i
].track
);
1418 msf_from_bcd(&toc
->ent
[i
].addr
.msf
);
1420 toc
->ent
[i
].addr
.lba
= msf_to_lba(toc
->ent
[i
].addr
.msf
.minute
,
1421 toc
->ent
[i
].addr
.msf
.second
,
1422 toc
->ent
[i
].addr
.msf
.frame
);
1425 if (toc
->hdr
.first_track
!= CDROM_LEADOUT
) {
1426 /* read the multisession information */
1427 stat
= cdrom_read_tocentry(drive
, 0, 0, 1, (char *)&ms_tmp
,
1428 sizeof(ms_tmp
), sense
);
1432 toc
->last_session_lba
= be32_to_cpu(ms_tmp
.ent
.addr
.lba
);
1434 ms_tmp
.hdr
.last_track
= CDROM_LEADOUT
;
1435 ms_tmp
.hdr
.first_track
= ms_tmp
.hdr
.last_track
;
1436 toc
->last_session_lba
= msf_to_lba(0, 2, 0); /* 0m 2s 0f */
1439 if (drive
->atapi_flags
& IDE_AFLAG_TOCADDR_AS_BCD
) {
1440 /* re-read multisession information using MSF format */
1441 stat
= cdrom_read_tocentry(drive
, 0, 1, 1, (char *)&ms_tmp
,
1442 sizeof(ms_tmp
), sense
);
1446 msf_from_bcd(&ms_tmp
.ent
.addr
.msf
);
1447 toc
->last_session_lba
= msf_to_lba(ms_tmp
.ent
.addr
.msf
.minute
,
1448 ms_tmp
.ent
.addr
.msf
.second
,
1449 ms_tmp
.ent
.addr
.msf
.frame
);
1452 toc
->xa_flag
= (ms_tmp
.hdr
.first_track
!= ms_tmp
.hdr
.last_track
);
1454 /* now try to get the total cdrom capacity */
1455 stat
= cdrom_get_last_written(cdi
, &last_written
);
1456 if (!stat
&& (last_written
> toc
->capacity
)) {
1457 toc
->capacity
= last_written
;
1458 set_capacity(info
->disk
, toc
->capacity
* sectors_per_frame
);
1459 drive
->probed_capacity
= toc
->capacity
* sectors_per_frame
;
1462 /* Remember that we've read this stuff. */
1463 drive
->atapi_flags
|= IDE_AFLAG_TOC_VALID
;
1468 int ide_cdrom_get_capabilities(ide_drive_t
*drive
, u8
*buf
)
1470 struct cdrom_info
*info
= drive
->driver_data
;
1471 struct cdrom_device_info
*cdi
= &info
->devinfo
;
1472 struct packet_command cgc
;
1473 int stat
, attempts
= 3, size
= ATAPI_CAPABILITIES_PAGE_SIZE
;
1475 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
1477 if ((drive
->atapi_flags
& IDE_AFLAG_FULL_CAPS_PAGE
) == 0)
1478 size
-= ATAPI_CAPABILITIES_PAGE_PAD_SIZE
;
1480 init_cdrom_command(&cgc
, buf
, size
, CGC_DATA_UNKNOWN
);
1482 /* we seem to get stat=0x01,err=0x00 the first time (??) */
1483 stat
= cdrom_mode_sense(cdi
, &cgc
, GPMODE_CAPABILITIES_PAGE
, 0);
1486 } while (--attempts
);
1490 void ide_cdrom_update_speed(ide_drive_t
*drive
, u8
*buf
)
1492 struct cdrom_info
*cd
= drive
->driver_data
;
1493 u16 curspeed
, maxspeed
;
1495 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
1497 if (drive
->atapi_flags
& IDE_AFLAG_LE_SPEED_FIELDS
) {
1498 curspeed
= le16_to_cpup((__le16
*)&buf
[8 + 14]);
1499 maxspeed
= le16_to_cpup((__le16
*)&buf
[8 + 8]);
1501 curspeed
= be16_to_cpup((__be16
*)&buf
[8 + 14]);
1502 maxspeed
= be16_to_cpup((__be16
*)&buf
[8 + 8]);
1505 ide_debug_log(IDE_DBG_PROBE
, "%s: curspeed: %u, maxspeed: %u\n",
1506 __func__
, curspeed
, maxspeed
);
1508 cd
->current_speed
= (curspeed
+ (176/2)) / 176;
1509 cd
->max_speed
= (maxspeed
+ (176/2)) / 176;
1512 #define IDE_CD_CAPABILITIES \
1513 (CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | \
1514 CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | \
1515 CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R | \
1516 CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_GENERIC_PACKET | \
1517 CDC_MO_DRIVE | CDC_MRW | CDC_MRW_W | CDC_RAM)
1519 static struct cdrom_device_ops ide_cdrom_dops
= {
1520 .open
= ide_cdrom_open_real
,
1521 .release
= ide_cdrom_release_real
,
1522 .drive_status
= ide_cdrom_drive_status
,
1523 .media_changed
= ide_cdrom_check_media_change_real
,
1524 .tray_move
= ide_cdrom_tray_move
,
1525 .lock_door
= ide_cdrom_lock_door
,
1526 .select_speed
= ide_cdrom_select_speed
,
1527 .get_last_session
= ide_cdrom_get_last_session
,
1528 .get_mcn
= ide_cdrom_get_mcn
,
1529 .reset
= ide_cdrom_reset
,
1530 .audio_ioctl
= ide_cdrom_audio_ioctl
,
1531 .capability
= IDE_CD_CAPABILITIES
,
1532 .generic_packet
= ide_cdrom_packet
,
1535 static int ide_cdrom_register(ide_drive_t
*drive
, int nslots
)
1537 struct cdrom_info
*info
= drive
->driver_data
;
1538 struct cdrom_device_info
*devinfo
= &info
->devinfo
;
1540 ide_debug_log(IDE_DBG_PROBE
, "Call %s, nslots: %d\n", __func__
, nslots
);
1542 devinfo
->ops
= &ide_cdrom_dops
;
1543 devinfo
->speed
= info
->current_speed
;
1544 devinfo
->capacity
= nslots
;
1545 devinfo
->handle
= drive
;
1546 strcpy(devinfo
->name
, drive
->name
);
1548 if (drive
->atapi_flags
& IDE_AFLAG_NO_SPEED_SELECT
)
1549 devinfo
->mask
|= CDC_SELECT_SPEED
;
1551 devinfo
->disk
= info
->disk
;
1552 return register_cdrom(devinfo
);
1555 static int ide_cdrom_probe_capabilities(ide_drive_t
*drive
)
1557 struct cdrom_info
*cd
= drive
->driver_data
;
1558 struct cdrom_device_info
*cdi
= &cd
->devinfo
;
1559 u8 buf
[ATAPI_CAPABILITIES_PAGE_SIZE
];
1560 mechtype_t mechtype
;
1563 ide_debug_log(IDE_DBG_PROBE
, "Call %s, drive->media: 0x%x, "
1564 "drive->atapi_flags: 0x%lx\n", __func__
, drive
->media
,
1565 drive
->atapi_flags
);
1567 cdi
->mask
= (CDC_CD_R
| CDC_CD_RW
| CDC_DVD
| CDC_DVD_R
|
1568 CDC_DVD_RAM
| CDC_SELECT_DISC
| CDC_PLAY_AUDIO
|
1569 CDC_MO_DRIVE
| CDC_RAM
);
1571 if (drive
->media
== ide_optical
) {
1572 cdi
->mask
&= ~(CDC_MO_DRIVE
| CDC_RAM
);
1573 printk(KERN_ERR PFX
"%s: ATAPI magneto-optical drive\n",
1578 if (drive
->atapi_flags
& IDE_AFLAG_PRE_ATAPI12
) {
1579 drive
->atapi_flags
&= ~IDE_AFLAG_NO_EJECT
;
1580 cdi
->mask
&= ~CDC_PLAY_AUDIO
;
1585 * We have to cheat a little here. the packet will eventually be queued
1586 * with ide_cdrom_packet(), which extracts the drive from cdi->handle.
1587 * Since this device hasn't been registered with the Uniform layer yet,
1588 * it can't do this. Same goes for cdi->ops.
1590 cdi
->handle
= drive
;
1591 cdi
->ops
= &ide_cdrom_dops
;
1593 if (ide_cdrom_get_capabilities(drive
, buf
))
1596 if ((buf
[8 + 6] & 0x01) == 0)
1597 drive
->dev_flags
&= ~IDE_DFLAG_DOORLOCKING
;
1598 if (buf
[8 + 6] & 0x08)
1599 drive
->atapi_flags
&= ~IDE_AFLAG_NO_EJECT
;
1600 if (buf
[8 + 3] & 0x01)
1601 cdi
->mask
&= ~CDC_CD_R
;
1602 if (buf
[8 + 3] & 0x02)
1603 cdi
->mask
&= ~(CDC_CD_RW
| CDC_RAM
);
1604 if (buf
[8 + 2] & 0x38)
1605 cdi
->mask
&= ~CDC_DVD
;
1606 if (buf
[8 + 3] & 0x20)
1607 cdi
->mask
&= ~(CDC_DVD_RAM
| CDC_RAM
);
1608 if (buf
[8 + 3] & 0x10)
1609 cdi
->mask
&= ~CDC_DVD_R
;
1610 if ((buf
[8 + 4] & 0x01) || (drive
->atapi_flags
& IDE_AFLAG_PLAY_AUDIO_OK
))
1611 cdi
->mask
&= ~CDC_PLAY_AUDIO
;
1613 mechtype
= buf
[8 + 6] >> 5;
1614 if (mechtype
== mechtype_caddy
||
1615 mechtype
== mechtype_popup
||
1616 (drive
->atapi_flags
& IDE_AFLAG_NO_AUTOCLOSE
))
1617 cdi
->mask
|= CDC_CLOSE_TRAY
;
1619 if (cdi
->sanyo_slot
> 0) {
1620 cdi
->mask
&= ~CDC_SELECT_DISC
;
1622 } else if (mechtype
== mechtype_individual_changer
||
1623 mechtype
== mechtype_cartridge_changer
) {
1624 nslots
= cdrom_number_of_slots(cdi
);
1626 cdi
->mask
&= ~CDC_SELECT_DISC
;
1629 ide_cdrom_update_speed(drive
, buf
);
1631 printk(KERN_INFO PFX
"%s: ATAPI", drive
->name
);
1633 /* don't print speed if the drive reported 0 */
1635 printk(KERN_CONT
" %dX", cd
->max_speed
);
1637 printk(KERN_CONT
" %s", (cdi
->mask
& CDC_DVD
) ? "CD-ROM" : "DVD-ROM");
1639 if ((cdi
->mask
& CDC_DVD_R
) == 0 || (cdi
->mask
& CDC_DVD_RAM
) == 0)
1640 printk(KERN_CONT
" DVD%s%s",
1641 (cdi
->mask
& CDC_DVD_R
) ? "" : "-R",
1642 (cdi
->mask
& CDC_DVD_RAM
) ? "" : "/RAM");
1644 if ((cdi
->mask
& CDC_CD_R
) == 0 || (cdi
->mask
& CDC_CD_RW
) == 0)
1645 printk(KERN_CONT
" CD%s%s",
1646 (cdi
->mask
& CDC_CD_R
) ? "" : "-R",
1647 (cdi
->mask
& CDC_CD_RW
) ? "" : "/RW");
1649 if ((cdi
->mask
& CDC_SELECT_DISC
) == 0)
1650 printk(KERN_CONT
" changer w/%d slots", nslots
);
1652 printk(KERN_CONT
" drive");
1654 printk(KERN_CONT
", %dkB Cache\n",
1655 be16_to_cpup((__be16
*)&buf
[8 + 12]));
1660 /* standard prep_rq_fn that builds 10 byte cmds */
1661 static int ide_cdrom_prep_fs(struct request_queue
*q
, struct request
*rq
)
1663 int hard_sect
= queue_hardsect_size(q
);
1664 long block
= (long)rq
->hard_sector
/ (hard_sect
>> 9);
1665 unsigned long blocks
= rq
->hard_nr_sectors
/ (hard_sect
>> 9);
1667 memset(rq
->cmd
, 0, BLK_MAX_CDB
);
1669 if (rq_data_dir(rq
) == READ
)
1670 rq
->cmd
[0] = GPCMD_READ_10
;
1672 rq
->cmd
[0] = GPCMD_WRITE_10
;
1677 rq
->cmd
[2] = (block
>> 24) & 0xff;
1678 rq
->cmd
[3] = (block
>> 16) & 0xff;
1679 rq
->cmd
[4] = (block
>> 8) & 0xff;
1680 rq
->cmd
[5] = block
& 0xff;
1683 * and transfer length
1685 rq
->cmd
[7] = (blocks
>> 8) & 0xff;
1686 rq
->cmd
[8] = blocks
& 0xff;
1692 * Most of the SCSI commands are supported directly by ATAPI devices.
1693 * This transform handles the few exceptions.
1695 static int ide_cdrom_prep_pc(struct request
*rq
)
1699 /* transform 6-byte read/write commands to the 10-byte version */
1700 if (c
[0] == READ_6
|| c
[0] == WRITE_6
) {
1707 c
[0] += (READ_10
- READ_6
);
1713 * it's silly to pretend we understand 6-byte sense commands, just
1714 * reject with ILLEGAL_REQUEST and the caller should take the
1715 * appropriate action
1717 if (c
[0] == MODE_SENSE
|| c
[0] == MODE_SELECT
) {
1718 rq
->errors
= ILLEGAL_REQUEST
;
1719 return BLKPREP_KILL
;
1725 static int ide_cdrom_prep_fn(struct request_queue
*q
, struct request
*rq
)
1727 if (blk_fs_request(rq
))
1728 return ide_cdrom_prep_fs(q
, rq
);
1729 else if (blk_pc_request(rq
))
1730 return ide_cdrom_prep_pc(rq
);
1735 struct cd_list_entry
{
1736 const char *id_model
;
1737 const char *id_firmware
;
1738 unsigned int cd_flags
;
1741 #ifdef CONFIG_IDE_PROC_FS
1742 static sector_t
ide_cdrom_capacity(ide_drive_t
*drive
)
1744 unsigned long capacity
, sectors_per_frame
;
1746 if (cdrom_read_capacity(drive
, &capacity
, §ors_per_frame
, NULL
))
1749 return capacity
* sectors_per_frame
;
1752 static int proc_idecd_read_capacity(char *page
, char **start
, off_t off
,
1753 int count
, int *eof
, void *data
)
1755 ide_drive_t
*drive
= data
;
1758 len
= sprintf(page
, "%llu\n", (long long)ide_cdrom_capacity(drive
));
1759 PROC_IDE_READ_RETURN(page
, start
, off
, count
, eof
, len
);
1762 static ide_proc_entry_t idecd_proc
[] = {
1763 { "capacity", S_IFREG
|S_IRUGO
, proc_idecd_read_capacity
, NULL
},
1764 { NULL
, 0, NULL
, NULL
}
1767 static ide_proc_entry_t
*ide_cd_proc_entries(ide_drive_t
*drive
)
1772 static const struct ide_proc_devset
*ide_cd_proc_devsets(ide_drive_t
*drive
)
1778 static const struct cd_list_entry ide_cd_quirks_list
[] = {
1779 /* Limit transfer size per interrupt. */
1780 { "SAMSUNG CD-ROM SCR-2430", NULL
, IDE_AFLAG_LIMIT_NFRAMES
},
1781 { "SAMSUNG CD-ROM SCR-2432", NULL
, IDE_AFLAG_LIMIT_NFRAMES
},
1782 /* SCR-3231 doesn't support the SET_CD_SPEED command. */
1783 { "SAMSUNG CD-ROM SCR-3231", NULL
, IDE_AFLAG_NO_SPEED_SELECT
},
1784 /* Old NEC260 (not R) was released before ATAPI 1.2 spec. */
1785 { "NEC CD-ROM DRIVE:260", "1.01", IDE_AFLAG_TOCADDR_AS_BCD
|
1786 IDE_AFLAG_PRE_ATAPI12
, },
1787 /* Vertos 300, some versions of this drive like to talk BCD. */
1788 { "V003S0DS", NULL
, IDE_AFLAG_VERTOS_300_SSD
, },
1789 /* Vertos 600 ESD. */
1790 { "V006E0DS", NULL
, IDE_AFLAG_VERTOS_600_ESD
, },
1792 * Sanyo 3 CD changer uses a non-standard command for CD changing
1793 * (by default standard ATAPI support for CD changers is used).
1795 { "CD-ROM CDR-C3 G", NULL
, IDE_AFLAG_SANYO_3CD
},
1796 { "CD-ROM CDR-C3G", NULL
, IDE_AFLAG_SANYO_3CD
},
1797 { "CD-ROM CDR_C36", NULL
, IDE_AFLAG_SANYO_3CD
},
1798 /* Stingray 8X CD-ROM. */
1799 { "STINGRAY 8422 IDE 8X CD-ROM 7-27-95", NULL
, IDE_AFLAG_PRE_ATAPI12
},
1801 * ACER 50X CD-ROM and WPI 32X CD-ROM require the full spec length
1802 * mode sense page capabilities size, but older drives break.
1804 { "ATAPI CD ROM DRIVE 50X MAX", NULL
, IDE_AFLAG_FULL_CAPS_PAGE
},
1805 { "WPI CDS-32X", NULL
, IDE_AFLAG_FULL_CAPS_PAGE
},
1806 /* ACER/AOpen 24X CD-ROM has the speed fields byte-swapped. */
1807 { "", "241N", IDE_AFLAG_LE_SPEED_FIELDS
},
1809 * Some drives used by Apple don't advertise audio play
1810 * but they do support reading TOC & audio datas.
1812 { "MATSHITADVD-ROM SR-8187", NULL
, IDE_AFLAG_PLAY_AUDIO_OK
},
1813 { "MATSHITADVD-ROM SR-8186", NULL
, IDE_AFLAG_PLAY_AUDIO_OK
},
1814 { "MATSHITADVD-ROM SR-8176", NULL
, IDE_AFLAG_PLAY_AUDIO_OK
},
1815 { "MATSHITADVD-ROM SR-8174", NULL
, IDE_AFLAG_PLAY_AUDIO_OK
},
1816 { "Optiarc DVD RW AD-5200A", NULL
, IDE_AFLAG_PLAY_AUDIO_OK
},
1817 { "Optiarc DVD RW AD-7200A", NULL
, IDE_AFLAG_PLAY_AUDIO_OK
},
1818 { "Optiarc DVD RW AD-7543A", NULL
, IDE_AFLAG_NO_AUTOCLOSE
},
1819 { "TEAC CD-ROM CD-224E", NULL
, IDE_AFLAG_NO_AUTOCLOSE
},
1823 static unsigned int ide_cd_flags(u16
*id
)
1825 const struct cd_list_entry
*cle
= ide_cd_quirks_list
;
1827 while (cle
->id_model
) {
1828 if (strcmp(cle
->id_model
, (char *)&id
[ATA_ID_PROD
]) == 0 &&
1829 (cle
->id_firmware
== NULL
||
1830 strstr((char *)&id
[ATA_ID_FW_REV
], cle
->id_firmware
)))
1831 return cle
->cd_flags
;
1838 static int ide_cdrom_setup(ide_drive_t
*drive
)
1840 struct cdrom_info
*cd
= drive
->driver_data
;
1841 struct cdrom_device_info
*cdi
= &cd
->devinfo
;
1842 u16
*id
= drive
->id
;
1843 char *fw_rev
= (char *)&id
[ATA_ID_FW_REV
];
1846 ide_debug_log(IDE_DBG_PROBE
, "Call %s\n", __func__
);
1848 blk_queue_prep_rq(drive
->queue
, ide_cdrom_prep_fn
);
1849 blk_queue_dma_alignment(drive
->queue
, 31);
1850 blk_queue_update_dma_pad(drive
->queue
, 15);
1851 drive
->queue
->unplug_delay
= (1 * HZ
) / 1000;
1852 if (!drive
->queue
->unplug_delay
)
1853 drive
->queue
->unplug_delay
= 1;
1855 drive
->dev_flags
|= IDE_DFLAG_MEDIA_CHANGED
;
1856 drive
->atapi_flags
= IDE_AFLAG_NO_EJECT
| ide_cd_flags(id
);
1858 if ((drive
->atapi_flags
& IDE_AFLAG_VERTOS_300_SSD
) &&
1859 fw_rev
[4] == '1' && fw_rev
[6] <= '2')
1860 drive
->atapi_flags
|= (IDE_AFLAG_TOCTRACKS_AS_BCD
|
1861 IDE_AFLAG_TOCADDR_AS_BCD
);
1862 else if ((drive
->atapi_flags
& IDE_AFLAG_VERTOS_600_ESD
) &&
1863 fw_rev
[4] == '1' && fw_rev
[6] <= '2')
1864 drive
->atapi_flags
|= IDE_AFLAG_TOCTRACKS_AS_BCD
;
1865 else if (drive
->atapi_flags
& IDE_AFLAG_SANYO_3CD
)
1866 /* 3 => use CD in slot 0 */
1867 cdi
->sanyo_slot
= 3;
1869 nslots
= ide_cdrom_probe_capabilities(drive
);
1871 /* set correct block size */
1872 blk_queue_hardsect_size(drive
->queue
, CD_FRAMESIZE
);
1874 if (ide_cdrom_register(drive
, nslots
)) {
1875 printk(KERN_ERR PFX
"%s: %s failed to register device with the"
1876 " cdrom driver.\n", drive
->name
, __func__
);
1877 cd
->devinfo
.handle
= NULL
;
1881 ide_proc_register_driver(drive
, cd
->driver
);
1885 static void ide_cd_remove(ide_drive_t
*drive
)
1887 struct cdrom_info
*info
= drive
->driver_data
;
1889 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
1891 ide_proc_unregister_driver(drive
, info
->driver
);
1893 del_gendisk(info
->disk
);
1898 static void ide_cd_release(struct kref
*kref
)
1900 struct cdrom_info
*info
= to_ide_drv(kref
, cdrom_info
);
1901 struct cdrom_device_info
*devinfo
= &info
->devinfo
;
1902 ide_drive_t
*drive
= info
->drive
;
1903 struct gendisk
*g
= info
->disk
;
1905 ide_debug_log(IDE_DBG_FUNC
, "Call %s\n", __func__
);
1908 if (devinfo
->handle
== drive
)
1909 unregister_cdrom(devinfo
);
1910 drive
->driver_data
= NULL
;
1911 blk_queue_prep_rq(drive
->queue
, NULL
);
1912 g
->private_data
= NULL
;
1917 static int ide_cd_probe(ide_drive_t
*);
1919 static ide_driver_t ide_cdrom_driver
= {
1921 .owner
= THIS_MODULE
,
1922 .name
= "ide-cdrom",
1923 .bus
= &ide_bus_type
,
1925 .probe
= ide_cd_probe
,
1926 .remove
= ide_cd_remove
,
1927 .version
= IDECD_VERSION
,
1928 .do_request
= ide_cd_do_request
,
1929 .end_request
= ide_end_request
,
1930 .error
= __ide_error
,
1931 #ifdef CONFIG_IDE_PROC_FS
1932 .proc_entries
= ide_cd_proc_entries
,
1933 .proc_devsets
= ide_cd_proc_devsets
,
1937 static int idecd_open(struct block_device
*bdev
, fmode_t mode
)
1939 struct cdrom_info
*info
= ide_cd_get(bdev
->bd_disk
);
1945 rc
= cdrom_open(&info
->devinfo
, bdev
, mode
);
1953 static int idecd_release(struct gendisk
*disk
, fmode_t mode
)
1955 struct cdrom_info
*info
= ide_drv_g(disk
, cdrom_info
);
1957 cdrom_release(&info
->devinfo
, mode
);
1964 static int idecd_set_spindown(struct cdrom_device_info
*cdi
, unsigned long arg
)
1966 struct packet_command cgc
;
1971 if (copy_from_user(&spindown
, (void __user
*)arg
, sizeof(char)))
1974 init_cdrom_command(&cgc
, buffer
, sizeof(buffer
), CGC_DATA_UNKNOWN
);
1976 stat
= cdrom_mode_sense(cdi
, &cgc
, GPMODE_CDROM_PAGE
, 0);
1980 buffer
[11] = (buffer
[11] & 0xf0) | (spindown
& 0x0f);
1981 return cdrom_mode_select(cdi
, &cgc
);
1984 static int idecd_get_spindown(struct cdrom_device_info
*cdi
, unsigned long arg
)
1986 struct packet_command cgc
;
1991 init_cdrom_command(&cgc
, buffer
, sizeof(buffer
), CGC_DATA_UNKNOWN
);
1993 stat
= cdrom_mode_sense(cdi
, &cgc
, GPMODE_CDROM_PAGE
, 0);
1997 spindown
= buffer
[11] & 0x0f;
1998 if (copy_to_user((void __user
*)arg
, &spindown
, sizeof(char)))
2003 static int idecd_ioctl(struct block_device
*bdev
, fmode_t mode
,
2004 unsigned int cmd
, unsigned long arg
)
2006 struct cdrom_info
*info
= ide_drv_g(bdev
->bd_disk
, cdrom_info
);
2010 case CDROMSETSPINDOWN
:
2011 return idecd_set_spindown(&info
->devinfo
, arg
);
2012 case CDROMGETSPINDOWN
:
2013 return idecd_get_spindown(&info
->devinfo
, arg
);
2018 err
= generic_ide_ioctl(info
->drive
, bdev
, cmd
, arg
);
2020 err
= cdrom_ioctl(&info
->devinfo
, bdev
, mode
, cmd
, arg
);
2025 static int idecd_media_changed(struct gendisk
*disk
)
2027 struct cdrom_info
*info
= ide_drv_g(disk
, cdrom_info
);
2028 return cdrom_media_changed(&info
->devinfo
);
2031 static int idecd_revalidate_disk(struct gendisk
*disk
)
2033 struct cdrom_info
*info
= ide_drv_g(disk
, cdrom_info
);
2034 struct request_sense sense
;
2036 ide_cd_read_toc(info
->drive
, &sense
);
2041 static struct block_device_operations idecd_ops
= {
2042 .owner
= THIS_MODULE
,
2044 .release
= idecd_release
,
2045 .locked_ioctl
= idecd_ioctl
,
2046 .media_changed
= idecd_media_changed
,
2047 .revalidate_disk
= idecd_revalidate_disk
2050 /* module options */
2051 static char *ignore
;
2052 module_param(ignore
, charp
, 0400);
2054 static unsigned long debug_mask
;
2055 module_param(debug_mask
, ulong
, 0644);
2057 MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
2059 static int ide_cd_probe(ide_drive_t
*drive
)
2061 struct cdrom_info
*info
;
2063 struct request_sense sense
;
2065 ide_debug_log(IDE_DBG_PROBE
, "Call %s, drive->driver_req: %s, "
2066 "drive->media: 0x%x\n", __func__
, drive
->driver_req
,
2069 if (!strstr("ide-cdrom", drive
->driver_req
))
2072 if (drive
->media
!= ide_cdrom
&& drive
->media
!= ide_optical
)
2075 /* skip drives that we were told to ignore */
2076 if (ignore
!= NULL
) {
2077 if (strstr(ignore
, drive
->name
)) {
2078 printk(KERN_INFO PFX
"ignoring drive %s\n",
2084 drive
->debug_mask
= debug_mask
;
2086 info
= kzalloc(sizeof(struct cdrom_info
), GFP_KERNEL
);
2088 printk(KERN_ERR PFX
"%s: Can't allocate a cdrom structure\n",
2093 g
= alloc_disk(1 << PARTN_BITS
);
2097 ide_init_disk(g
, drive
);
2099 kref_init(&info
->kref
);
2101 info
->drive
= drive
;
2102 info
->driver
= &ide_cdrom_driver
;
2105 g
->private_data
= &info
->driver
;
2107 drive
->driver_data
= info
;
2110 g
->driverfs_dev
= &drive
->gendev
;
2111 g
->flags
= GENHD_FL_CD
| GENHD_FL_REMOVABLE
;
2112 if (ide_cdrom_setup(drive
)) {
2113 ide_cd_release(&info
->kref
);
2117 ide_cd_read_toc(drive
, &sense
);
2118 g
->fops
= &idecd_ops
;
2119 g
->flags
|= GENHD_FL_REMOVABLE
;
2129 static void __exit
ide_cdrom_exit(void)
2131 driver_unregister(&ide_cdrom_driver
.gen_driver
);
2134 static int __init
ide_cdrom_init(void)
2136 printk(KERN_INFO DRV_NAME
" driver " IDECD_VERSION
"\n");
2137 return driver_register(&ide_cdrom_driver
.gen_driver
);
2140 MODULE_ALIAS("ide:*m-cdrom*");
2141 MODULE_ALIAS("ide-cd");
2142 module_init(ide_cdrom_init
);
2143 module_exit(ide_cdrom_exit
);
2144 MODULE_LICENSE("GPL");