2 * Setup pointers to hardware-dependent routines.
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
8 * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle
9 * Copyright (C) 2001 MIPS Technologies, Inc.
10 * Copyright (C) 2007 by Thomas Bogendoerfer
12 #include <linux/eisa.h>
13 #include <linux/hdreg.h>
14 #include <linux/init.h>
15 #include <linux/ioport.h>
16 #include <linux/sched.h>
17 #include <linux/interrupt.h>
19 #include <linux/console.h>
21 #include <linux/ide.h>
23 #include <linux/screen_info.h>
24 #include <linux/platform_device.h>
25 #include <linux/serial_8250.h>
27 #include <asm/bootinfo.h>
28 #include <asm/i8253.h>
31 #include <asm/jazzdma.h>
32 #include <asm/reboot.h>
34 #include <asm/pgtable.h>
36 #include <asm/traps.h>
37 #include <asm/mc146818-time.h>
39 extern asmlinkage
void jazz_handle_int(void);
41 extern void jazz_machine_restart(char *command
);
43 static struct resource jazz_io_resources
[] = {
48 .flags
= IORESOURCE_BUSY
53 .flags
= IORESOURCE_BUSY
57 .name
= "dma page reg",
58 .flags
= IORESOURCE_BUSY
63 .flags
= IORESOURCE_BUSY
67 void __init
plat_time_init(void)
72 void __init
plat_mem_setup(void)
76 /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
77 add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K
);
78 /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
79 add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M
);
80 /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
81 add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M
);
83 set_io_port_base(JAZZ_PORT_BASE
);
85 if (mips_machtype
== MACH_MIPS_MAGNUM_4000
)
88 isa_slot_offset
= 0xe3000000;
90 /* request I/O space for devices used on all i[345]86 PCs */
91 for (i
= 0; i
< ARRAY_SIZE(jazz_io_resources
); i
++)
92 request_resource(&ioport_resource
, jazz_io_resources
+ i
);
94 /* The RTC is outside the port address space */
96 _machine_restart
= jazz_machine_restart
;
99 screen_info
= (struct screen_info
) {
100 0, 0, /* orig-x, orig-y */
102 0, /* orig_video_page */
103 0, /* orig_video_mode */
104 160, /* orig_video_cols */
105 0, 0, 0, /* unused, ega_bx, unused */
106 64, /* orig_video_lines */
107 0, /* orig_video_isVGA */
108 16 /* orig_video_points */
112 add_preferred_console("ttyS", 0, "9600");
115 #ifdef CONFIG_OLIVETTI_M700
116 #define UART_CLK 1843200
118 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
119 exactly which ones ... XXX */
120 #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */
123 #define MEMPORT(_base, _irq) \
125 .mapbase = (_base), \
126 .membase = (void *)(_base), \
128 .uartclk = UART_CLK, \
129 .iotype = UPIO_MEM, \
130 .flags = UPF_BOOT_AUTOCONF, \
133 static struct plat_serial8250_port jazz_serial_data
[] = {
134 MEMPORT(JAZZ_SERIAL1_BASE
, JAZZ_SERIAL1_IRQ
),
135 MEMPORT(JAZZ_SERIAL2_BASE
, JAZZ_SERIAL2_IRQ
),
139 static struct platform_device jazz_serial8250_device
= {
140 .name
= "serial8250",
141 .id
= PLAT8250_DEV_PLATFORM
,
143 .platform_data
= jazz_serial_data
,
147 static struct resource jazz_esp_rsrc
[] = {
149 .start
= JAZZ_SCSI_BASE
,
150 .end
= JAZZ_SCSI_BASE
+ 31,
151 .flags
= IORESOURCE_MEM
154 .start
= JAZZ_SCSI_DMA
,
155 .end
= JAZZ_SCSI_DMA
,
156 .flags
= IORESOURCE_MEM
159 .start
= JAZZ_SCSI_IRQ
,
160 .end
= JAZZ_SCSI_IRQ
,
161 .flags
= IORESOURCE_IRQ
165 static struct platform_device jazz_esp_pdev
= {
167 .num_resources
= ARRAY_SIZE(jazz_esp_rsrc
),
168 .resource
= jazz_esp_rsrc
171 static struct resource jazz_sonic_rsrc
[] = {
173 .start
= JAZZ_ETHERNET_BASE
,
174 .end
= JAZZ_ETHERNET_BASE
+ 0xff,
175 .flags
= IORESOURCE_MEM
178 .start
= JAZZ_ETHERNET_IRQ
,
179 .end
= JAZZ_ETHERNET_IRQ
,
180 .flags
= IORESOURCE_IRQ
184 static struct platform_device jazz_sonic_pdev
= {
186 .num_resources
= ARRAY_SIZE(jazz_sonic_rsrc
),
187 .resource
= jazz_sonic_rsrc
190 static struct resource jazz_cmos_rsrc
[] = {
194 .flags
= IORESOURCE_IO
199 .flags
= IORESOURCE_IRQ
203 static struct platform_device jazz_cmos_pdev
= {
205 .num_resources
= ARRAY_SIZE(jazz_cmos_rsrc
),
206 .resource
= jazz_cmos_rsrc
209 static int __init
jazz_setup_devinit(void)
211 platform_device_register(&jazz_serial8250_device
);
212 platform_device_register(&jazz_esp_pdev
);
213 platform_device_register(&jazz_sonic_pdev
);
214 platform_device_register(&jazz_cmos_pdev
);
218 device_initcall(jazz_setup_devinit
);