[IA64] fix generic/up builds
[linux-2.6/linux-loongson.git] / arch / ia64 / mm / discontig.c
blobb5c90e54819542691785b8cc64e250a39d93f260
1 /*
2 * Copyright (c) 2000, 2003 Silicon Graphics, Inc. All rights reserved.
3 * Copyright (c) 2001 Intel Corp.
4 * Copyright (c) 2001 Tony Luck <tony.luck@intel.com>
5 * Copyright (c) 2002 NEC Corp.
6 * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
7 * Copyright (c) 2004 Silicon Graphics, Inc
8 * Russ Anderson <rja@sgi.com>
9 * Jesse Barnes <jbarnes@sgi.com>
10 * Jack Steiner <steiner@sgi.com>
14 * Platform initialization for Discontig Memory
17 #include <linux/kernel.h>
18 #include <linux/mm.h>
19 #include <linux/swap.h>
20 #include <linux/bootmem.h>
21 #include <linux/acpi.h>
22 #include <linux/efi.h>
23 #include <linux/nodemask.h>
24 #include <asm/pgalloc.h>
25 #include <asm/tlb.h>
26 #include <asm/meminit.h>
27 #include <asm/numa.h>
28 #include <asm/sections.h>
31 * Track per-node information needed to setup the boot memory allocator, the
32 * per-node areas, and the real VM.
34 struct early_node_data {
35 struct ia64_node_data *node_data;
36 pg_data_t *pgdat;
37 unsigned long pernode_addr;
38 unsigned long pernode_size;
39 struct bootmem_data bootmem_data;
40 unsigned long num_physpages;
41 unsigned long num_dma_physpages;
42 unsigned long min_pfn;
43 unsigned long max_pfn;
46 static struct early_node_data mem_data[MAX_NUMNODES] __initdata;
47 static nodemask_t memory_less_mask __initdata;
50 * To prevent cache aliasing effects, align per-node structures so that they
51 * start at addresses that are strided by node number.
53 #define NODEDATA_ALIGN(addr, node) \
54 ((((addr) + 1024*1024-1) & ~(1024*1024-1)) + (node)*PERCPU_PAGE_SIZE)
56 /**
57 * build_node_maps - callback to setup bootmem structs for each node
58 * @start: physical start of range
59 * @len: length of range
60 * @node: node where this range resides
62 * We allocate a struct bootmem_data for each piece of memory that we wish to
63 * treat as a virtually contiguous block (i.e. each node). Each such block
64 * must start on an %IA64_GRANULE_SIZE boundary, so we round the address down
65 * if necessary. Any non-existent pages will simply be part of the virtual
66 * memmap. We also update min_low_pfn and max_low_pfn here as we receive
67 * memory ranges from the caller.
69 static int __init build_node_maps(unsigned long start, unsigned long len,
70 int node)
72 unsigned long cstart, epfn, end = start + len;
73 struct bootmem_data *bdp = &mem_data[node].bootmem_data;
75 epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
76 cstart = GRANULEROUNDDOWN(start);
78 if (!bdp->node_low_pfn) {
79 bdp->node_boot_start = cstart;
80 bdp->node_low_pfn = epfn;
81 } else {
82 bdp->node_boot_start = min(cstart, bdp->node_boot_start);
83 bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
86 min_low_pfn = min(min_low_pfn, bdp->node_boot_start>>PAGE_SHIFT);
87 max_low_pfn = max(max_low_pfn, bdp->node_low_pfn);
89 return 0;
92 /**
93 * early_nr_cpus_node - return number of cpus on a given node
94 * @node: node to check
96 * Count the number of cpus on @node. We can't use nr_cpus_node() yet because
97 * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
98 * called yet. Note that node 0 will also count all non-existent cpus.
100 static int __init early_nr_cpus_node(int node)
102 int cpu, n = 0;
104 for (cpu = 0; cpu < NR_CPUS; cpu++)
105 if (node == node_cpuid[cpu].nid)
106 n++;
108 return n;
112 * compute_pernodesize - compute size of pernode data
113 * @node: the node id.
115 static unsigned long __init compute_pernodesize(int node)
117 unsigned long pernodesize = 0, cpus;
119 cpus = early_nr_cpus_node(node);
120 pernodesize += PERCPU_PAGE_SIZE * cpus;
121 pernodesize += node * L1_CACHE_BYTES;
122 pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
123 pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
124 pernodesize = PAGE_ALIGN(pernodesize);
125 return pernodesize;
129 * per_cpu_node_setup - setup per-cpu areas on each node
130 * @cpu_data: per-cpu area on this node
131 * @node: node to setup
133 * Copy the static per-cpu data into the region we just set aside and then
134 * setup __per_cpu_offset for each CPU on this node. Return a pointer to
135 * the end of the area.
137 static void *per_cpu_node_setup(void *cpu_data, int node)
139 #ifdef CONFIG_SMP
140 int cpu;
142 for (cpu = 0; cpu < NR_CPUS; cpu++) {
143 if (node == node_cpuid[cpu].nid) {
144 memcpy(__va(cpu_data), __phys_per_cpu_start,
145 __per_cpu_end - __per_cpu_start);
146 __per_cpu_offset[cpu] = (char*)__va(cpu_data) -
147 __per_cpu_start;
148 cpu_data += PERCPU_PAGE_SIZE;
151 #endif
152 return cpu_data;
156 * fill_pernode - initialize pernode data.
157 * @node: the node id.
158 * @pernode: physical address of pernode data
159 * @pernodesize: size of the pernode data
161 static void __init fill_pernode(int node, unsigned long pernode,
162 unsigned long pernodesize)
164 void *cpu_data;
165 int cpus = early_nr_cpus_node(node);
166 struct bootmem_data *bdp = &mem_data[node].bootmem_data;
168 mem_data[node].pernode_addr = pernode;
169 mem_data[node].pernode_size = pernodesize;
170 memset(__va(pernode), 0, pernodesize);
172 cpu_data = (void *)pernode;
173 pernode += PERCPU_PAGE_SIZE * cpus;
174 pernode += node * L1_CACHE_BYTES;
176 mem_data[node].pgdat = __va(pernode);
177 pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
179 mem_data[node].node_data = __va(pernode);
180 pernode += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
182 mem_data[node].pgdat->bdata = bdp;
183 pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
185 cpu_data = per_cpu_node_setup(cpu_data, node);
187 return;
191 * find_pernode_space - allocate memory for memory map and per-node structures
192 * @start: physical start of range
193 * @len: length of range
194 * @node: node where this range resides
196 * This routine reserves space for the per-cpu data struct, the list of
197 * pg_data_ts and the per-node data struct. Each node will have something like
198 * the following in the first chunk of addr. space large enough to hold it.
200 * ________________________
201 * | |
202 * |~~~~~~~~~~~~~~~~~~~~~~~~| <-- NODEDATA_ALIGN(start, node) for the first
203 * | PERCPU_PAGE_SIZE * | start and length big enough
204 * | cpus_on_this_node | Node 0 will also have entries for all non-existent cpus.
205 * |------------------------|
206 * | local pg_data_t * |
207 * |------------------------|
208 * | local ia64_node_data |
209 * |------------------------|
210 * | ??? |
211 * |________________________|
213 * Once this space has been set aside, the bootmem maps are initialized. We
214 * could probably move the allocation of the per-cpu and ia64_node_data space
215 * outside of this function and use alloc_bootmem_node(), but doing it here
216 * is straightforward and we get the alignments we want so...
218 static int __init find_pernode_space(unsigned long start, unsigned long len,
219 int node)
221 unsigned long epfn;
222 unsigned long pernodesize = 0, pernode, pages, mapsize;
223 struct bootmem_data *bdp = &mem_data[node].bootmem_data;
225 epfn = (start + len) >> PAGE_SHIFT;
227 pages = bdp->node_low_pfn - (bdp->node_boot_start >> PAGE_SHIFT);
228 mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
231 * Make sure this memory falls within this node's usable memory
232 * since we may have thrown some away in build_maps().
234 if (start < bdp->node_boot_start || epfn > bdp->node_low_pfn)
235 return 0;
237 /* Don't setup this node's local space twice... */
238 if (mem_data[node].pernode_addr)
239 return 0;
242 * Calculate total size needed, incl. what's necessary
243 * for good alignment and alias prevention.
245 pernodesize = compute_pernodesize(node);
246 pernode = NODEDATA_ALIGN(start, node);
248 /* Is this range big enough for what we want to store here? */
249 if (start + len > (pernode + pernodesize + mapsize))
250 fill_pernode(node, pernode, pernodesize);
252 return 0;
256 * free_node_bootmem - free bootmem allocator memory for use
257 * @start: physical start of range
258 * @len: length of range
259 * @node: node where this range resides
261 * Simply calls the bootmem allocator to free the specified ranged from
262 * the given pg_data_t's bdata struct. After this function has been called
263 * for all the entries in the EFI memory map, the bootmem allocator will
264 * be ready to service allocation requests.
266 static int __init free_node_bootmem(unsigned long start, unsigned long len,
267 int node)
269 free_bootmem_node(mem_data[node].pgdat, start, len);
271 return 0;
275 * reserve_pernode_space - reserve memory for per-node space
277 * Reserve the space used by the bootmem maps & per-node space in the boot
278 * allocator so that when we actually create the real mem maps we don't
279 * use their memory.
281 static void __init reserve_pernode_space(void)
283 unsigned long base, size, pages;
284 struct bootmem_data *bdp;
285 int node;
287 for_each_online_node(node) {
288 pg_data_t *pdp = mem_data[node].pgdat;
290 if (node_isset(node, memory_less_mask))
291 continue;
293 bdp = pdp->bdata;
295 /* First the bootmem_map itself */
296 pages = bdp->node_low_pfn - (bdp->node_boot_start>>PAGE_SHIFT);
297 size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
298 base = __pa(bdp->node_bootmem_map);
299 reserve_bootmem_node(pdp, base, size);
301 /* Now the per-node space */
302 size = mem_data[node].pernode_size;
303 base = __pa(mem_data[node].pernode_addr);
304 reserve_bootmem_node(pdp, base, size);
309 * initialize_pernode_data - fixup per-cpu & per-node pointers
311 * Each node's per-node area has a copy of the global pg_data_t list, so
312 * we copy that to each node here, as well as setting the per-cpu pointer
313 * to the local node data structure. The active_cpus field of the per-node
314 * structure gets setup by the platform_cpu_init() function later.
316 static void __init initialize_pernode_data(void)
318 pg_data_t *pgdat_list[MAX_NUMNODES];
319 int cpu, node;
321 for_each_online_node(node)
322 pgdat_list[node] = mem_data[node].pgdat;
324 /* Copy the pg_data_t list to each node and init the node field */
325 for_each_online_node(node) {
326 memcpy(mem_data[node].node_data->pg_data_ptrs, pgdat_list,
327 sizeof(pgdat_list));
329 #ifdef CONFIG_SMP
330 /* Set the node_data pointer for each per-cpu struct */
331 for (cpu = 0; cpu < NR_CPUS; cpu++) {
332 node = node_cpuid[cpu].nid;
333 per_cpu(cpu_info, cpu).node_data = mem_data[node].node_data;
335 #else
337 struct cpuinfo_ia64 *cpu0_cpu_info;
338 cpu = 0;
339 node = node_cpuid[cpu].nid;
340 cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start +
341 ((char *)&per_cpu__cpu_info - __per_cpu_start));
342 cpu0_cpu_info->node_data = mem_data[node].node_data;
344 #endif /* CONFIG_SMP */
348 * memory_less_node_alloc - * attempt to allocate memory on the best NUMA slit
349 * node but fall back to any other node when __alloc_bootmem_node fails
350 * for best.
351 * @nid: node id
352 * @pernodesize: size of this node's pernode data
353 * @align: alignment to use for this node's pernode data
355 static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize,
356 unsigned long align)
358 void *ptr = NULL;
359 u8 best = 0xff;
360 int bestnode = -1, node;
362 for_each_online_node(node) {
363 if (node_isset(node, memory_less_mask))
364 continue;
365 else if (node_distance(nid, node) < best) {
366 best = node_distance(nid, node);
367 bestnode = node;
371 ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat,
372 pernodesize, align, __pa(MAX_DMA_ADDRESS));
374 if (!ptr)
375 panic("NO memory for memory less node\n");
376 return ptr;
380 * pgdat_insert - insert the pgdat into global pgdat_list
381 * @pgdat: the pgdat for a node.
383 static void __init pgdat_insert(pg_data_t *pgdat)
385 pg_data_t *prev = NULL, *next;
387 for_each_pgdat(next)
388 if (pgdat->node_id < next->node_id)
389 break;
390 else
391 prev = next;
393 if (prev) {
394 prev->pgdat_next = pgdat;
395 pgdat->pgdat_next = next;
396 } else {
397 pgdat->pgdat_next = pgdat_list;
398 pgdat_list = pgdat;
401 return;
405 * memory_less_nodes - allocate and initialize CPU only nodes pernode
406 * information.
408 static void __init memory_less_nodes(void)
410 unsigned long pernodesize;
411 void *pernode;
412 int node;
414 for_each_node_mask(node, memory_less_mask) {
415 pernodesize = compute_pernodesize(node);
416 pernode = memory_less_node_alloc(node, pernodesize,
417 (node) ? (node * PERCPU_PAGE_SIZE) : (1024*1024));
418 fill_pernode(node, __pa(pernode), pernodesize);
421 return;
425 * find_memory - walk the EFI memory map and setup the bootmem allocator
427 * Called early in boot to setup the bootmem allocator, and to
428 * allocate the per-cpu and per-node structures.
430 void __init find_memory(void)
432 int node;
434 reserve_memory();
436 if (num_online_nodes() == 0) {
437 printk(KERN_ERR "node info missing!\n");
438 node_set_online(0);
441 nodes_or(memory_less_mask, memory_less_mask, node_online_map);
442 min_low_pfn = -1;
443 max_low_pfn = 0;
445 /* These actually end up getting called by call_pernode_memory() */
446 efi_memmap_walk(filter_rsvd_memory, build_node_maps);
447 efi_memmap_walk(filter_rsvd_memory, find_pernode_space);
449 for_each_online_node(node)
450 if (mem_data[node].bootmem_data.node_low_pfn) {
451 node_clear(node, memory_less_mask);
452 mem_data[node].min_pfn = ~0UL;
455 * Initialize the boot memory maps in reverse order since that's
456 * what the bootmem allocator expects
458 for (node = MAX_NUMNODES - 1; node >= 0; node--) {
459 unsigned long pernode, pernodesize, map;
460 struct bootmem_data *bdp;
462 if (!node_online(node))
463 continue;
464 else if (node_isset(node, memory_less_mask))
465 continue;
467 bdp = &mem_data[node].bootmem_data;
468 pernode = mem_data[node].pernode_addr;
469 pernodesize = mem_data[node].pernode_size;
470 map = pernode + pernodesize;
472 init_bootmem_node(mem_data[node].pgdat,
473 map>>PAGE_SHIFT,
474 bdp->node_boot_start>>PAGE_SHIFT,
475 bdp->node_low_pfn);
478 efi_memmap_walk(filter_rsvd_memory, free_node_bootmem);
480 reserve_pernode_space();
481 memory_less_nodes();
482 initialize_pernode_data();
484 max_pfn = max_low_pfn;
486 find_initrd();
489 #ifdef CONFIG_SMP
491 * per_cpu_init - setup per-cpu variables
493 * find_pernode_space() does most of this already, we just need to set
494 * local_per_cpu_offset
496 void *per_cpu_init(void)
498 int cpu;
500 if (smp_processor_id() != 0)
501 return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
503 for (cpu = 0; cpu < NR_CPUS; cpu++)
504 per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
506 return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
508 #endif /* CONFIG_SMP */
511 * show_mem - give short summary of memory stats
513 * Shows a simple page count of reserved and used pages in the system.
514 * For discontig machines, it does this on a per-pgdat basis.
516 void show_mem(void)
518 int i, total_reserved = 0;
519 int total_shared = 0, total_cached = 0;
520 unsigned long total_present = 0;
521 pg_data_t *pgdat;
523 printk("Mem-info:\n");
524 show_free_areas();
525 printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
526 for_each_pgdat(pgdat) {
527 unsigned long present = pgdat->node_present_pages;
528 int shared = 0, cached = 0, reserved = 0;
529 printk("Node ID: %d\n", pgdat->node_id);
530 for(i = 0; i < pgdat->node_spanned_pages; i++) {
531 struct page *page = pgdat_page_nr(pgdat, i);
532 if (!ia64_pfn_valid(pgdat->node_start_pfn+i))
533 continue;
534 if (PageReserved(page))
535 reserved++;
536 else if (PageSwapCache(page))
537 cached++;
538 else if (page_count(page))
539 shared += page_count(page)-1;
541 total_present += present;
542 total_reserved += reserved;
543 total_cached += cached;
544 total_shared += shared;
545 printk("\t%ld pages of RAM\n", present);
546 printk("\t%d reserved pages\n", reserved);
547 printk("\t%d pages shared\n", shared);
548 printk("\t%d pages swap cached\n", cached);
550 printk("%ld pages of RAM\n", total_present);
551 printk("%d reserved pages\n", total_reserved);
552 printk("%d pages shared\n", total_shared);
553 printk("%d pages swap cached\n", total_cached);
554 printk("Total of %ld pages in page table cache\n",
555 pgtable_quicklist_total_size());
556 printk("%d free buffer pages\n", nr_free_buffer_pages());
560 * call_pernode_memory - use SRAT to call callback functions with node info
561 * @start: physical start of range
562 * @len: length of range
563 * @arg: function to call for each range
565 * efi_memmap_walk() knows nothing about layout of memory across nodes. Find
566 * out to which node a block of memory belongs. Ignore memory that we cannot
567 * identify, and split blocks that run across multiple nodes.
569 * Take this opportunity to round the start address up and the end address
570 * down to page boundaries.
572 void call_pernode_memory(unsigned long start, unsigned long len, void *arg)
574 unsigned long rs, re, end = start + len;
575 void (*func)(unsigned long, unsigned long, int);
576 int i;
578 start = PAGE_ALIGN(start);
579 end &= PAGE_MASK;
580 if (start >= end)
581 return;
583 func = arg;
585 if (!num_node_memblks) {
586 /* No SRAT table, so assume one node (node 0) */
587 if (start < end)
588 (*func)(start, end - start, 0);
589 return;
592 for (i = 0; i < num_node_memblks; i++) {
593 rs = max(start, node_memblk[i].start_paddr);
594 re = min(end, node_memblk[i].start_paddr +
595 node_memblk[i].size);
597 if (rs < re)
598 (*func)(rs, re - rs, node_memblk[i].nid);
600 if (re == end)
601 break;
606 * count_node_pages - callback to build per-node memory info structures
607 * @start: physical start of range
608 * @len: length of range
609 * @node: node where this range resides
611 * Each node has it's own number of physical pages, DMAable pages, start, and
612 * end page frame number. This routine will be called by call_pernode_memory()
613 * for each piece of usable memory and will setup these values for each node.
614 * Very similar to build_maps().
616 static __init int count_node_pages(unsigned long start, unsigned long len, int node)
618 unsigned long end = start + len;
620 mem_data[node].num_physpages += len >> PAGE_SHIFT;
621 if (start <= __pa(MAX_DMA_ADDRESS))
622 mem_data[node].num_dma_physpages +=
623 (min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT;
624 start = GRANULEROUNDDOWN(start);
625 start = ORDERROUNDDOWN(start);
626 end = GRANULEROUNDUP(end);
627 mem_data[node].max_pfn = max(mem_data[node].max_pfn,
628 end >> PAGE_SHIFT);
629 mem_data[node].min_pfn = min(mem_data[node].min_pfn,
630 start >> PAGE_SHIFT);
632 return 0;
636 * paging_init - setup page tables
638 * paging_init() sets up the page tables for each node of the system and frees
639 * the bootmem allocator memory for general use.
641 void __init paging_init(void)
643 unsigned long max_dma;
644 unsigned long zones_size[MAX_NR_ZONES];
645 unsigned long zholes_size[MAX_NR_ZONES];
646 unsigned long pfn_offset = 0;
647 int node;
649 max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
651 efi_memmap_walk(filter_rsvd_memory, count_node_pages);
653 vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page));
654 vmem_map = (struct page *) vmalloc_end;
655 efi_memmap_walk(create_mem_map_page_table, NULL);
656 printk("Virtual mem_map starts at 0x%p\n", vmem_map);
658 for_each_online_node(node) {
659 memset(zones_size, 0, sizeof(zones_size));
660 memset(zholes_size, 0, sizeof(zholes_size));
662 num_physpages += mem_data[node].num_physpages;
664 if (mem_data[node].min_pfn >= max_dma) {
665 /* All of this node's memory is above ZONE_DMA */
666 zones_size[ZONE_NORMAL] = mem_data[node].max_pfn -
667 mem_data[node].min_pfn;
668 zholes_size[ZONE_NORMAL] = mem_data[node].max_pfn -
669 mem_data[node].min_pfn -
670 mem_data[node].num_physpages;
671 } else if (mem_data[node].max_pfn < max_dma) {
672 /* All of this node's memory is in ZONE_DMA */
673 zones_size[ZONE_DMA] = mem_data[node].max_pfn -
674 mem_data[node].min_pfn;
675 zholes_size[ZONE_DMA] = mem_data[node].max_pfn -
676 mem_data[node].min_pfn -
677 mem_data[node].num_dma_physpages;
678 } else {
679 /* This node has memory in both zones */
680 zones_size[ZONE_DMA] = max_dma -
681 mem_data[node].min_pfn;
682 zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] -
683 mem_data[node].num_dma_physpages;
684 zones_size[ZONE_NORMAL] = mem_data[node].max_pfn -
685 max_dma;
686 zholes_size[ZONE_NORMAL] = zones_size[ZONE_NORMAL] -
687 (mem_data[node].num_physpages -
688 mem_data[node].num_dma_physpages);
691 pfn_offset = mem_data[node].min_pfn;
693 NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
694 free_area_init_node(node, NODE_DATA(node), zones_size,
695 pfn_offset, zholes_size);
699 * Make memory less nodes become a member of the known nodes.
701 for_each_node_mask(node, memory_less_mask)
702 pgdat_insert(mem_data[node].pgdat);
704 zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));