libata: use flush_work()
[linux-2.6/linux-loongson.git] / arch / arm / mach-footbridge / common.c
blobef29fc34ce6587ff6493a86e01c29b31ce542f2f
1 /*
2 * linux/arch/arm/mach-footbridge/common.c
4 * Copyright (C) 1998-2000 Russell King, Dave Gilbert.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10 #include <linux/module.h>
11 #include <linux/types.h>
12 #include <linux/mm.h>
13 #include <linux/ioport.h>
14 #include <linux/list.h>
15 #include <linux/init.h>
17 #include <asm/pgtable.h>
18 #include <asm/page.h>
19 #include <asm/irq.h>
20 #include <asm/io.h>
21 #include <asm/mach-types.h>
22 #include <asm/setup.h>
23 #include <asm/hardware/dec21285.h>
25 #include <asm/mach/irq.h>
26 #include <asm/mach/map.h>
28 #include "common.h"
30 extern void __init isa_init_irq(unsigned int irq);
32 unsigned int mem_fclk_21285 = 50000000;
34 EXPORT_SYMBOL(mem_fclk_21285);
36 static int __init parse_tag_memclk(const struct tag *tag)
38 mem_fclk_21285 = tag->u.memclk.fmemclk;
39 return 0;
42 __tagtable(ATAG_MEMCLK, parse_tag_memclk);
45 * Footbridge IRQ translation table
46 * Converts from our IRQ numbers into FootBridge masks
48 static const int fb_irq_mask[] = {
49 IRQ_MASK_UART_RX, /* 0 */
50 IRQ_MASK_UART_TX, /* 1 */
51 IRQ_MASK_TIMER1, /* 2 */
52 IRQ_MASK_TIMER2, /* 3 */
53 IRQ_MASK_TIMER3, /* 4 */
54 IRQ_MASK_IN0, /* 5 */
55 IRQ_MASK_IN1, /* 6 */
56 IRQ_MASK_IN2, /* 7 */
57 IRQ_MASK_IN3, /* 8 */
58 IRQ_MASK_DOORBELLHOST, /* 9 */
59 IRQ_MASK_DMA1, /* 10 */
60 IRQ_MASK_DMA2, /* 11 */
61 IRQ_MASK_PCI, /* 12 */
62 IRQ_MASK_SDRAMPARITY, /* 13 */
63 IRQ_MASK_I2OINPOST, /* 14 */
64 IRQ_MASK_PCI_ABORT, /* 15 */
65 IRQ_MASK_PCI_SERR, /* 16 */
66 IRQ_MASK_DISCARD_TIMER, /* 17 */
67 IRQ_MASK_PCI_DPERR, /* 18 */
68 IRQ_MASK_PCI_PERR, /* 19 */
71 static void fb_mask_irq(unsigned int irq)
73 *CSR_IRQ_DISABLE = fb_irq_mask[_DC21285_INR(irq)];
76 static void fb_unmask_irq(unsigned int irq)
78 *CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(irq)];
81 static struct irq_chip fb_chip = {
82 .ack = fb_mask_irq,
83 .mask = fb_mask_irq,
84 .unmask = fb_unmask_irq,
87 static void __init __fb_init_irq(void)
89 unsigned int irq;
92 * setup DC21285 IRQs
94 *CSR_IRQ_DISABLE = -1;
95 *CSR_FIQ_DISABLE = -1;
97 for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
98 set_irq_chip(irq, &fb_chip);
99 set_irq_handler(irq, handle_level_irq);
100 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
104 void __init footbridge_init_irq(void)
106 __fb_init_irq();
108 if (!footbridge_cfn_mode())
109 return;
111 if (machine_is_ebsa285())
112 /* The following is dependent on which slot
113 * you plug the Southbridge card into. We
114 * currently assume that you plug it into
115 * the right-hand most slot.
117 isa_init_irq(IRQ_PCI);
119 if (machine_is_cats())
120 isa_init_irq(IRQ_IN2);
122 if (machine_is_netwinder())
123 isa_init_irq(IRQ_IN3);
127 * Common mapping for all systems. Note that the outbound write flush is
128 * commented out since there is a "No Fix" problem with it. Not mapping
129 * it means that we have extra bullet protection on our feet.
131 static struct map_desc fb_common_io_desc[] __initdata = {
133 .virtual = ARMCSR_BASE,
134 .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE),
135 .length = ARMCSR_SIZE,
136 .type = MT_DEVICE,
137 }, {
138 .virtual = XBUS_BASE,
139 .pfn = __phys_to_pfn(0x40000000),
140 .length = XBUS_SIZE,
141 .type = MT_DEVICE,
146 * The mapping when the footbridge is in host mode. We don't map any of
147 * this when we are in add-in mode.
149 static struct map_desc ebsa285_host_io_desc[] __initdata = {
150 #if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
152 .virtual = PCIMEM_BASE,
153 .pfn = __phys_to_pfn(DC21285_PCI_MEM),
154 .length = PCIMEM_SIZE,
155 .type = MT_DEVICE,
156 }, {
157 .virtual = PCICFG0_BASE,
158 .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
159 .length = PCICFG0_SIZE,
160 .type = MT_DEVICE,
161 }, {
162 .virtual = PCICFG1_BASE,
163 .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
164 .length = PCICFG1_SIZE,
165 .type = MT_DEVICE,
166 }, {
167 .virtual = PCIIACK_BASE,
168 .pfn = __phys_to_pfn(DC21285_PCI_IACK),
169 .length = PCIIACK_SIZE,
170 .type = MT_DEVICE,
171 }, {
172 .virtual = PCIO_BASE,
173 .pfn = __phys_to_pfn(DC21285_PCI_IO),
174 .length = PCIO_SIZE,
175 .type = MT_DEVICE,
177 #endif
181 * The CO-ebsa285 mapping.
183 static struct map_desc co285_io_desc[] __initdata = {
184 #ifdef CONFIG_ARCH_CO285
186 .virtual = PCIO_BASE,
187 .pfn = __phys_to_pfn(DC21285_PCI_IO),
188 .length = PCIO_SIZE,
189 .type = MT_DEVICE,
190 }, {
191 .virtual = PCIMEM_BASE,
192 .pfn = __phys_to_pfn(DC21285_PCI_MEM),
193 .length = PCIMEM_SIZE,
194 .type = MT_DEVICE,
196 #endif
199 void __init footbridge_map_io(void)
202 * Set up the common mapping first; we need this to
203 * determine whether we're in host mode or not.
205 iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));
208 * Now, work out what we've got to map in addition on this
209 * platform.
211 if (machine_is_co285())
212 iotable_init(co285_io_desc, ARRAY_SIZE(co285_io_desc));
213 if (footbridge_cfn_mode())
214 iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
217 #ifdef CONFIG_FOOTBRIDGE_ADDIN
220 * These two functions convert virtual addresses to PCI addresses and PCI
221 * addresses to virtual addresses. Note that it is only legal to use these
222 * on memory obtained via get_zeroed_page or kmalloc.
224 unsigned long __virt_to_bus(unsigned long res)
226 WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
228 return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0);
230 EXPORT_SYMBOL(__virt_to_bus);
232 unsigned long __bus_to_virt(unsigned long res)
234 res -= (*CSR_PCISDRAMBASE & 0xfffffff0);
235 res += PAGE_OFFSET;
237 WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
239 return res;
241 EXPORT_SYMBOL(__bus_to_virt);
243 #endif