ALSA: hda - Add fix-up for Sony VAIO with ALC269
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-omap1 / board-voiceblue.c
blob87b9436fe7c0c011972fd24b7da43716a5aad5fd
1 /*
2 * linux/arch/arm/mach-omap1/board-voiceblue.c
4 * Modified from board-generic.c
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/platform_device.h>
17 #include <linux/interrupt.h>
18 #include <linux/irq.h>
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/mtd/physmap.h>
22 #include <linux/notifier.h>
23 #include <linux/reboot.h>
24 #include <linux/serial_8250.h>
25 #include <linux/serial_reg.h>
26 #include <linux/smc91x.h>
28 #include <mach/hardware.h>
29 #include <asm/mach-types.h>
30 #include <asm/mach/arch.h>
31 #include <asm/mach/map.h>
33 #include <plat/common.h>
34 #include <mach/gpio.h>
35 #include <plat/flash.h>
36 #include <plat/mux.h>
37 #include <plat/tc.h>
38 #include <plat/usb.h>
40 static struct plat_serial8250_port voiceblue_ports[] = {
42 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
43 .irq = OMAP_GPIO_IRQ(12),
44 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
45 .iotype = UPIO_MEM,
46 .regshift = 1,
47 .uartclk = 3686400,
50 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
51 .irq = OMAP_GPIO_IRQ(13),
52 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
53 .iotype = UPIO_MEM,
54 .regshift = 1,
55 .uartclk = 3686400,
58 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
59 .irq = OMAP_GPIO_IRQ(14),
60 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
61 .iotype = UPIO_MEM,
62 .regshift = 1,
63 .uartclk = 3686400,
66 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
67 .irq = OMAP_GPIO_IRQ(15),
68 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
69 .iotype = UPIO_MEM,
70 .regshift = 1,
71 .uartclk = 3686400,
73 { },
76 static struct platform_device serial_device = {
77 .name = "serial8250",
78 .id = PLAT8250_DEV_PLATFORM1,
79 .dev = {
80 .platform_data = voiceblue_ports,
84 static int __init ext_uart_init(void)
86 return platform_device_register(&serial_device);
88 arch_initcall(ext_uart_init);
90 static struct physmap_flash_data voiceblue_flash_data = {
91 .width = 2,
92 .set_vpp = omap1_set_vpp,
95 static struct resource voiceblue_flash_resource = {
96 .start = OMAP_CS0_PHYS,
97 .end = OMAP_CS0_PHYS + SZ_32M - 1,
98 .flags = IORESOURCE_MEM,
101 static struct platform_device voiceblue_flash_device = {
102 .name = "physmap-flash",
103 .id = 0,
104 .dev = {
105 .platform_data = &voiceblue_flash_data,
107 .num_resources = 1,
108 .resource = &voiceblue_flash_resource,
111 static struct smc91x_platdata voiceblue_smc91x_info = {
112 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
113 .leda = RPC_LED_100_10,
114 .ledb = RPC_LED_TX_RX,
117 static struct resource voiceblue_smc91x_resources[] = {
118 [0] = {
119 .start = OMAP_CS2_PHYS + 0x300,
120 .end = OMAP_CS2_PHYS + 0x300 + 16,
121 .flags = IORESOURCE_MEM,
123 [1] = {
124 .start = OMAP_GPIO_IRQ(8),
125 .end = OMAP_GPIO_IRQ(8),
126 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
130 static struct platform_device voiceblue_smc91x_device = {
131 .name = "smc91x",
132 .id = 0,
133 .dev = {
134 .platform_data = &voiceblue_smc91x_info,
136 .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
137 .resource = voiceblue_smc91x_resources,
140 static struct platform_device *voiceblue_devices[] __initdata = {
141 &voiceblue_flash_device,
142 &voiceblue_smc91x_device,
145 static struct omap_usb_config voiceblue_usb_config __initdata = {
146 .hmc_mode = 3,
147 .register_host = 1,
148 .register_dev = 1,
149 .pins[0] = 2,
150 .pins[1] = 6,
151 .pins[2] = 6,
154 static struct omap_board_config_kernel voiceblue_config[] = {
157 static void __init voiceblue_init_irq(void)
159 omap1_init_common_hw();
160 omap_init_irq();
161 omap_gpio_init();
164 static void __init voiceblue_init(void)
166 /* mux pins for uarts */
167 omap_cfg_reg(UART1_TX);
168 omap_cfg_reg(UART1_RTS);
169 omap_cfg_reg(UART2_TX);
170 omap_cfg_reg(UART2_RTS);
171 omap_cfg_reg(UART3_TX);
172 omap_cfg_reg(UART3_RX);
174 /* Watchdog */
175 gpio_request(0, "Watchdog");
176 /* smc91x reset */
177 gpio_request(7, "SMC91x reset");
178 gpio_direction_output(7, 1);
179 udelay(2); /* wait at least 100ns */
180 gpio_set_value(7, 0);
181 mdelay(50); /* 50ms until PHY ready */
182 /* smc91x interrupt pin */
183 gpio_request(8, "SMC91x irq");
184 /* 16C554 reset*/
185 gpio_request(6, "16C554 reset");
186 gpio_direction_output(6, 0);
187 /* 16C554 interrupt pins */
188 gpio_request(12, "16C554 irq");
189 gpio_request(13, "16C554 irq");
190 gpio_request(14, "16C554 irq");
191 gpio_request(15, "16C554 irq");
192 set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
193 set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
194 set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
195 set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
197 platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
198 omap_board_config = voiceblue_config;
199 omap_board_config_size = ARRAY_SIZE(voiceblue_config);
200 omap_serial_init();
201 omap_usb_init(&voiceblue_usb_config);
202 omap_register_i2c_bus(1, 100, NULL, 0);
204 /* There is a good chance board is going up, so enable power LED
205 * (it is connected through invertor) */
206 omap_writeb(0x00, OMAP_LPG1_LCR);
207 omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
210 static void __init voiceblue_map_io(void)
212 omap1_map_common_io();
215 #define MACHINE_PANICED 1
216 #define MACHINE_REBOOTING 2
217 #define MACHINE_REBOOT 4
218 static unsigned long machine_state;
220 static int panic_event(struct notifier_block *this, unsigned long event,
221 void *ptr)
223 if (test_and_set_bit(MACHINE_PANICED, &machine_state))
224 return NOTIFY_DONE;
226 /* Flash power LED */
227 omap_writeb(0x78, OMAP_LPG1_LCR);
228 omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
230 return NOTIFY_DONE;
233 static struct notifier_block panic_block = {
234 .notifier_call = panic_event,
237 static int __init voiceblue_setup(void)
239 /* Setup panic notifier */
240 atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
242 return 0;
244 postcore_initcall(voiceblue_setup);
246 static int wdt_gpio_state;
248 void voiceblue_wdt_enable(void)
250 gpio_direction_output(0, 0);
251 gpio_set_value(0, 1);
252 gpio_set_value(0, 0);
253 wdt_gpio_state = 0;
256 void voiceblue_wdt_disable(void)
258 gpio_set_value(0, 0);
259 gpio_set_value(0, 1);
260 gpio_set_value(0, 0);
261 gpio_direction_input(0);
264 void voiceblue_wdt_ping(void)
266 if (test_bit(MACHINE_REBOOT, &machine_state))
267 return;
269 wdt_gpio_state = !wdt_gpio_state;
270 gpio_set_value(0, wdt_gpio_state);
273 void voiceblue_reset(void)
275 set_bit(MACHINE_REBOOT, &machine_state);
276 voiceblue_wdt_enable();
277 while (1) ;
280 EXPORT_SYMBOL(voiceblue_wdt_enable);
281 EXPORT_SYMBOL(voiceblue_wdt_disable);
282 EXPORT_SYMBOL(voiceblue_wdt_ping);
284 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
285 /* Maintainer: Ladislav Michl <michl@2n.cz> */
286 .phys_io = 0xfff00000,
287 .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
288 .boot_params = 0x10000100,
289 .map_io = voiceblue_map_io,
290 .init_irq = voiceblue_init_irq,
291 .init_machine = voiceblue_init,
292 .timer = &omap_timer,
293 MACHINE_END