include/scsi/scsi.h

   1 /*
   2  * This header file contains public constants and structures used by
   3  * the scsi code for linux.
   4  *
   5  * For documentation on the OPCODES, MESSAGES, and SENSE values,
   6  * please consult the SCSI standard.
   7  */
   8 #ifndef _SCSI_SCSI_H
   9 #define _SCSI_SCSI_H
  10
  11 #include <linux/types.h>
  12
  13 struct scsi_cmnd;
  14
  15 /*
  16  * The maximum number of SG segments that we will put inside a
  17  * scatterlist (unless chaining is used). Should ideally fit inside a
  18  * single page, to avoid a higher order allocation.  We could define this
  19  * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order.  The
  20  * minimum value is 32
  21  */
  22 #define SCSI_MAX_SG_SEGMENTS    128
  23
  24 /*
  25  * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit
  26  * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
  27  */
  28 #ifdef ARCH_HAS_SG_CHAIN
  29 #define SCSI_MAX_SG_CHAIN_SEGMENTS      2048
  30 #else
  31 #define SCSI_MAX_SG_CHAIN_SEGMENTS      SCSI_MAX_SG_SEGMENTS
  32 #endif
  33
  34 /*
  35  * Special value for scanning to specify scanning or rescanning of all
  36  * possible channels, (target) ids, or luns on a given shost.
  37  */
  38 #define SCAN_WILD_CARD  ~0
  39
  40 /*
  41  *      SCSI opcodes
  42  */
  43
  44 #define TEST_UNIT_READY       0x00
  45 #define REZERO_UNIT           0x01
  46 #define REQUEST_SENSE         0x03
  47 #define FORMAT_UNIT           0x04
  48 #define READ_BLOCK_LIMITS     0x05
  49 #define REASSIGN_BLOCKS       0x07
  50 #define INITIALIZE_ELEMENT_STATUS 0x07
  51 #define READ_6                0x08
  52 #define WRITE_6               0x0a
  53 #define SEEK_6                0x0b
  54 #define READ_REVERSE          0x0f
  55 #define WRITE_FILEMARKS       0x10
  56 #define SPACE                 0x11
  57 #define INQUIRY               0x12
  58 #define RECOVER_BUFFERED_DATA 0x14
  59 #define MODE_SELECT           0x15
  60 #define RESERVE               0x16
  61 #define RELEASE               0x17
  62 #define COPY                  0x18
  63 #define ERASE                 0x19
  64 #define MODE_SENSE            0x1a
  65 #define START_STOP            0x1b
  66 #define RECEIVE_DIAGNOSTIC    0x1c
  67 #define SEND_DIAGNOSTIC       0x1d
  68 #define ALLOW_MEDIUM_REMOVAL  0x1e
  69
  70 #define SET_WINDOW            0x24
  71 #define READ_CAPACITY         0x25
  72 #define READ_10               0x28
  73 #define WRITE_10              0x2a
  74 #define SEEK_10               0x2b
  75 #define POSITION_TO_ELEMENT   0x2b
  76 #define WRITE_VERIFY          0x2e
  77 #define VERIFY                0x2f
  78 #define SEARCH_HIGH           0x30
  79 #define SEARCH_EQUAL          0x31
  80 #define SEARCH_LOW            0x32
  81 #define SET_LIMITS            0x33
  82 #define PRE_FETCH             0x34
  83 #define READ_POSITION         0x34
  84 #define SYNCHRONIZE_CACHE     0x35
  85 #define LOCK_UNLOCK_CACHE     0x36
  86 #define READ_DEFECT_DATA      0x37
  87 #define MEDIUM_SCAN           0x38
  88 #define COMPARE               0x39
  89 #define COPY_VERIFY           0x3a
  90 #define WRITE_BUFFER          0x3b
  91 #define READ_BUFFER           0x3c
  92 #define UPDATE_BLOCK          0x3d
  93 #define READ_LONG             0x3e
  94 #define WRITE_LONG            0x3f
  95 #define CHANGE_DEFINITION     0x40
  96 #define WRITE_SAME            0x41
  97 #define UNMAP                 0x42
  98 #define READ_TOC              0x43
  99 #define LOG_SELECT            0x4c
 100 #define LOG_SENSE             0x4d
 101 #define XDWRITEREAD_10        0x53
 102 #define MODE_SELECT_10        0x55
 103 #define RESERVE_10            0x56
 104 #define RELEASE_10            0x57
 105 #define MODE_SENSE_10         0x5a
 106 #define PERSISTENT_RESERVE_IN 0x5e
 107 #define PERSISTENT_RESERVE_OUT 0x5f
 108 #define VARIABLE_LENGTH_CMD   0x7f
 109 #define REPORT_LUNS           0xa0
 110 #define MAINTENANCE_IN        0xa3
 111 #define MAINTENANCE_OUT       0xa4
 112 #define MOVE_MEDIUM           0xa5
 113 #define EXCHANGE_MEDIUM       0xa6
 114 #define READ_12               0xa8
 115 #define WRITE_12              0xaa
 116 #define WRITE_VERIFY_12       0xae
 117 #define VERIFY_12             0xaf
 118 #define SEARCH_HIGH_12        0xb0
 119 #define SEARCH_EQUAL_12       0xb1
 120 #define SEARCH_LOW_12         0xb2
 121 #define READ_ELEMENT_STATUS   0xb8
 122 #define SEND_VOLUME_TAG       0xb6
 123 #define WRITE_LONG_2          0xea
 124 #define READ_16               0x88
 125 #define WRITE_16              0x8a
 126 #define VERIFY_16             0x8f
 127 #define WRITE_SAME_16         0x93
 128 #define SERVICE_ACTION_IN     0x9e
 129 /* values for service action in */
 130 #define SAI_READ_CAPACITY_16  0x10
 131 #define SAI_GET_LBA_STATUS    0x12
 132 /* values for maintenance in */
 133 #define MI_REPORT_TARGET_PGS  0x0a
 134 /* values for maintenance out */
 135 #define MO_SET_TARGET_PGS     0x0a
 136 /* values for variable length command */
 137 #define READ_32               0x09
 138 #define VERIFY_32             0x0a
 139 #define WRITE_32              0x0b
 140 #define WRITE_SAME_32         0x0d
 141
 142 /* Values for T10/04-262r7 */
 143 #define ATA_16                0x85      /* 16-byte pass-thru */
 144 #define ATA_12                0xa1      /* 12-byte pass-thru */
 145
 146 /*
 147  *      SCSI command lengths
 148  */
 149
 150 #define SCSI_MAX_VARLEN_CDB_SIZE 260
 151
 152 /* defined in T10 SCSI Primary Commands-2 (SPC2) */
 153 struct scsi_varlen_cdb_hdr {
 154         u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
 155         u8 control;
 156         u8 misc[5];
 157         u8 additional_cdb_length;         /* total cdb length - 8 */
 158         __be16 service_action;
 159         /* service specific data follows */
 160 };
 161
 162 static inline unsigned
 163 scsi_varlen_cdb_length(const void *hdr)
 164 {
 165         return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
 166 }
 167
 168 extern const unsigned char scsi_command_size_tbl[8];
 169 #define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
 170
 171 static inline unsigned
 172 scsi_command_size(const unsigned char *cmnd)
 173 {
 174         return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
 175                 scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
 176 }
 177
 178 /*
 179  *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
 180  *  T10/1561-D Revision 4 Draft dated 7th November 2002.
 181  */
 182 #define SAM_STAT_GOOD            0x00
 183 #define SAM_STAT_CHECK_CONDITION 0x02
 184 #define SAM_STAT_CONDITION_MET   0x04
 185 #define SAM_STAT_BUSY            0x08
 186 #define SAM_STAT_INTERMEDIATE    0x10
 187 #define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
 188 #define SAM_STAT_RESERVATION_CONFLICT 0x18
 189 #define SAM_STAT_COMMAND_TERMINATED 0x22        /* obsolete in SAM-3 */
 190 #define SAM_STAT_TASK_SET_FULL   0x28
 191 #define SAM_STAT_ACA_ACTIVE      0x30
 192 #define SAM_STAT_TASK_ABORTED    0x40
 193
 194 /** scsi_status_is_good - check the status return.
 195  *
 196  * @status: the status passed up from the driver (including host and
 197  *          driver components)
 198  *
 199  * This returns true for known good conditions that may be treated as
 200  * command completed normally
 201  */
 202 static inline int scsi_status_is_good(int status)
 203 {
 204         /*
 205          * FIXME: bit0 is listed as reserved in SCSI-2, but is
 206          * significant in SCSI-3.  For now, we follow the SCSI-2
 207          * behaviour and ignore reserved bits.
 208          */
 209         status &= 0xfe;
 210         return ((status == SAM_STAT_GOOD) ||
 211                 (status == SAM_STAT_INTERMEDIATE) ||
 212                 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
 213                 /* FIXME: this is obsolete in SAM-3 */
 214                 (status == SAM_STAT_COMMAND_TERMINATED));
 215 }
 216
 217 /*
 218  *  Status codes. These are deprecated as they are shifted 1 bit right
 219  *  from those found in the SCSI standards. This causes confusion for
 220  *  applications that are ported to several OSes. Prefer SAM Status codes
 221  *  above.
 222  */
 223
 224 #define GOOD                 0x00
 225 #define CHECK_CONDITION      0x01
 226 #define CONDITION_GOOD       0x02
 227 #define BUSY                 0x04
 228 #define INTERMEDIATE_GOOD    0x08
 229 #define INTERMEDIATE_C_GOOD  0x0a
 230 #define RESERVATION_CONFLICT 0x0c
 231 #define COMMAND_TERMINATED   0x11
 232 #define QUEUE_FULL           0x14
 233 #define ACA_ACTIVE           0x18
 234 #define TASK_ABORTED         0x20
 235
 236 #define STATUS_MASK          0xfe
 237
 238 /*
 239  *  SENSE KEYS
 240  */
 241
 242 #define NO_SENSE            0x00
 243 #define RECOVERED_ERROR     0x01
 244 #define NOT_READY           0x02
 245 #define MEDIUM_ERROR        0x03
 246 #define HARDWARE_ERROR      0x04
 247 #define ILLEGAL_REQUEST     0x05
 248 #define UNIT_ATTENTION      0x06
 249 #define DATA_PROTECT        0x07
 250 #define BLANK_CHECK         0x08
 251 #define COPY_ABORTED        0x0a
 252 #define ABORTED_COMMAND     0x0b
 253 #define VOLUME_OVERFLOW     0x0d
 254 #define MISCOMPARE          0x0e
 255
 256
 257 /*
 258  *  DEVICE TYPES
 259  *  Please keep them in 0x%02x format for $MODALIAS to work
 260  */
 261
 262 #define TYPE_DISK           0x00
 263 #define TYPE_TAPE           0x01
 264 #define TYPE_PRINTER        0x02
 265 #define TYPE_PROCESSOR      0x03    /* HP scanners use this */
 266 #define TYPE_WORM           0x04    /* Treated as ROM by our system */
 267 #define TYPE_ROM            0x05
 268 #define TYPE_SCANNER        0x06
 269 #define TYPE_MOD            0x07    /* Magneto-optical disk -
 270                                      * - treated as TYPE_DISK */
 271 #define TYPE_MEDIUM_CHANGER 0x08
 272 #define TYPE_COMM           0x09    /* Communications device */
 273 #define TYPE_RAID           0x0c
 274 #define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
 275 #define TYPE_RBC            0x0e
 276 #define TYPE_OSD            0x11
 277 #define TYPE_NO_LUN         0x7f
 278
 279 /* SCSI protocols; these are taken from SPC-3 section 7.5 */
 280 enum scsi_protocol {
 281         SCSI_PROTOCOL_FCP = 0,  /* Fibre Channel */
 282         SCSI_PROTOCOL_SPI = 1,  /* parallel SCSI */
 283         SCSI_PROTOCOL_SSA = 2,  /* Serial Storage Architecture - Obsolete */
 284         SCSI_PROTOCOL_SBP = 3,  /* firewire */
 285         SCSI_PROTOCOL_SRP = 4,  /* Infiniband RDMA */
 286         SCSI_PROTOCOL_ISCSI = 5,
 287         SCSI_PROTOCOL_SAS = 6,
 288         SCSI_PROTOCOL_ADT = 7,  /* Media Changers */
 289         SCSI_PROTOCOL_ATA = 8,
 290         SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
 291 };
 292
 293 /* Returns a human-readable name for the device */
 294 extern const char * scsi_device_type(unsigned type);
 295
 296 /*
 297  * standard mode-select header prepended to all mode-select commands
 298  */
 299
 300 struct ccs_modesel_head {
 301         __u8 _r1;                       /* reserved */
 302         __u8 medium;            /* device-specific medium type */
 303         __u8 _r2;                       /* reserved */
 304         __u8 block_desc_length; /* block descriptor length */
 305         __u8 density;           /* device-specific density code */
 306         __u8 number_blocks_hi;  /* number of blocks in this block desc */
 307         __u8 number_blocks_med;
 308         __u8 number_blocks_lo;
 309         __u8 _r3;
 310         __u8 block_length_hi;   /* block length for blocks in this desc */
 311         __u8 block_length_med;
 312         __u8 block_length_lo;
 313 };
 314
 315 /*
 316  * ScsiLun: 8 byte LUN.
 317  */
 318 struct scsi_lun {
 319         __u8 scsi_lun[8];
 320 };
 321
 322 /*
 323  * The Well Known LUNS (SAM-3) in our int representation of a LUN
 324  */
 325 #define SCSI_W_LUN_BASE 0xc100
 326 #define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
 327 #define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
 328 #define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
 329
 330 static inline int scsi_is_wlun(unsigned int lun)
 331 {
 332         return (lun & 0xff00) == SCSI_W_LUN_BASE;
 333 }
 334
 335
 336 /*
 337  *  MESSAGE CODES
 338  */
 339
 340 #define COMMAND_COMPLETE    0x00
 341 #define EXTENDED_MESSAGE    0x01
 342 #define     EXTENDED_MODIFY_DATA_POINTER    0x00
 343 #define     EXTENDED_SDTR                   0x01
 344 #define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
 345 #define     EXTENDED_WDTR                   0x03
 346 #define     EXTENDED_PPR                    0x04
 347 #define     EXTENDED_MODIFY_BIDI_DATA_PTR   0x05
 348 #define SAVE_POINTERS       0x02
 349 #define RESTORE_POINTERS    0x03
 350 #define DISCONNECT          0x04
 351 #define INITIATOR_ERROR     0x05
 352 #define ABORT_TASK_SET      0x06
 353 #define MESSAGE_REJECT      0x07
 354 #define NOP                 0x08
 355 #define MSG_PARITY_ERROR    0x09
 356 #define LINKED_CMD_COMPLETE 0x0a
 357 #define LINKED_FLG_CMD_COMPLETE 0x0b
 358 #define TARGET_RESET        0x0c
 359 #define ABORT_TASK          0x0d
 360 #define CLEAR_TASK_SET      0x0e
 361 #define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
 362 #define RELEASE_RECOVERY    0x10            /* SCSI-II only */
 363 #define CLEAR_ACA           0x16
 364 #define LOGICAL_UNIT_RESET  0x17
 365 #define SIMPLE_QUEUE_TAG    0x20
 366 #define HEAD_OF_QUEUE_TAG   0x21
 367 #define ORDERED_QUEUE_TAG   0x22
 368 #define IGNORE_WIDE_RESIDUE 0x23
 369 #define ACA                 0x24
 370 #define QAS_REQUEST         0x55
 371
 372 /* Old SCSI2 names, don't use in new code */
 373 #define BUS_DEVICE_RESET    TARGET_RESET
 374 #define ABORT               ABORT_TASK_SET
 375
 376 /*
 377  * Host byte codes
 378  */
 379
 380 #define DID_OK          0x00    /* NO error                                */
 381 #define DID_NO_CONNECT  0x01    /* Couldn't connect before timeout period  */
 382 #define DID_BUS_BUSY    0x02    /* BUS stayed busy through time out period */
 383 #define DID_TIME_OUT    0x03    /* TIMED OUT for other reason              */
 384 #define DID_BAD_TARGET  0x04    /* BAD target.                             */
 385 #define DID_ABORT       0x05    /* Told to abort for some other reason     */
 386 #define DID_PARITY      0x06    /* Parity error                            */
 387 #define DID_ERROR       0x07    /* Internal error                          */
 388 #define DID_RESET       0x08    /* Reset by somebody.                      */
 389 #define DID_BAD_INTR    0x09    /* Got an interrupt we weren't expecting.  */
 390 #define DID_PASSTHROUGH 0x0a    /* Force command past mid-layer            */
 391 #define DID_SOFT_ERROR  0x0b    /* The low level driver just wish a retry  */
 392 #define DID_IMM_RETRY   0x0c    /* Retry without decrementing retry count  */
 393 #define DID_REQUEUE     0x0d    /* Requeue command (no immediate retry) also
 394                                  * without decrementing the retry count    */
 395 #define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
 396                                       * and the driver blocked the port to
 397                                       * recover the link. Transport class will
 398                                       * retry or fail IO */
 399 #define DID_TRANSPORT_FAILFAST  0x0f /* Transport class fastfailed the io */
 400 #define DRIVER_OK       0x00    /* Driver status                           */
 401
 402 /*
 403  *  These indicate the error that occurred, and what is available.
 404  */
 405
 406 #define DRIVER_BUSY         0x01
 407 #define DRIVER_SOFT         0x02
 408 #define DRIVER_MEDIA        0x03
 409 #define DRIVER_ERROR        0x04
 410
 411 #define DRIVER_INVALID      0x05
 412 #define DRIVER_TIMEOUT      0x06
 413 #define DRIVER_HARD         0x07
 414 #define DRIVER_SENSE        0x08
 415
 416 /*
 417  * Internal return values.
 418  */
 419
 420 #define NEEDS_RETRY     0x2001
 421 #define SUCCESS         0x2002
 422 #define FAILED          0x2003
 423 #define QUEUED          0x2004
 424 #define SOFT_ERROR      0x2005
 425 #define ADD_TO_MLQUEUE  0x2006
 426 #define TIMEOUT_ERROR   0x2007
 427 #define SCSI_RETURN_NOT_HANDLED   0x2008
 428 #define FAST_IO_FAIL    0x2009
 429
 430 /*
 431  * Midlevel queue return values.
 432  */
 433 #define SCSI_MLQUEUE_HOST_BUSY   0x1055
 434 #define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
 435 #define SCSI_MLQUEUE_EH_RETRY    0x1057
 436 #define SCSI_MLQUEUE_TARGET_BUSY 0x1058
 437
 438 /*
 439  *  Use these to separate status msg and our bytes
 440  *
 441  *  These are set by:
 442  *
 443  *      status byte = set from target device
 444  *      msg_byte    = return status from host adapter itself.
 445  *      host_byte   = set by low-level driver to indicate status.
 446  *      driver_byte = set by mid-level.
 447  */
 448 #define status_byte(result) (((result) >> 1) & 0x7f)
 449 #define msg_byte(result)    (((result) >> 8) & 0xff)
 450 #define host_byte(result)   (((result) >> 16) & 0xff)
 451 #define driver_byte(result) (((result) >> 24) & 0xff)
 452
 453 #define sense_class(sense)  (((sense) >> 4) & 0x7)
 454 #define sense_error(sense)  ((sense) & 0xf)
 455 #define sense_valid(sense)  ((sense) & 0x80);
 456
 457 /*
 458  * default timeouts
 459 */
 460 #define FORMAT_UNIT_TIMEOUT             (2 * 60 * 60 * HZ)
 461 #define START_STOP_TIMEOUT              (60 * HZ)
 462 #define MOVE_MEDIUM_TIMEOUT             (5 * 60 * HZ)
 463 #define READ_ELEMENT_STATUS_TIMEOUT     (5 * 60 * HZ)
 464 #define READ_DEFECT_DATA_TIMEOUT        (60 * HZ )
 465
 466
 467 #define IDENTIFY_BASE       0x80
 468 #define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\
 469                      ((can_disconnect) ?  0x40 : 0) |\
 470                      ((lun) & 0x07))
 471
 472 /*
 473  *  struct scsi_device::scsi_level values. For SCSI devices other than those
 474  *  prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
 475  *  where "resp" is a byte array of the response to an INQUIRY. The scsi_level
 476  *  variable is visible to the user via sysfs.
 477  */
 478
 479 #define SCSI_UNKNOWN    0
 480 #define SCSI_1          1
 481 #define SCSI_1_CCS      2
 482 #define SCSI_2          3
 483 #define SCSI_3          4        /* SPC */
 484 #define SCSI_SPC_2      5
 485 #define SCSI_SPC_3      6
 486
 487 /*
 488  * INQ PERIPHERAL QUALIFIERS
 489  */
 490 #define SCSI_INQ_PQ_CON         0x00
 491 #define SCSI_INQ_PQ_NOT_CON     0x01
 492 #define SCSI_INQ_PQ_NOT_CAP     0x03
 493
 494
 495 /*
 496  * Here are some scsi specific ioctl commands which are sometimes useful.
 497  *
 498  * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
 499  */
 500
 501 /* Used to obtain PUN and LUN info.  Conflicts with CDROMAUDIOBUFSIZ */
 502 #define SCSI_IOCTL_GET_IDLUN            0x5382
 503
 504 /* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
 505
 506 /* Used to obtain the host number of a device. */
 507 #define SCSI_IOCTL_PROBE_HOST           0x5385
 508
 509 /* Used to obtain the bus number for a device */
 510 #define SCSI_IOCTL_GET_BUS_NUMBER       0x5386
 511
 512 /* Used to obtain the PCI location of a device */
 513 #define SCSI_IOCTL_GET_PCI              0x5387
 514
 515 /* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
 516 static inline __u32 scsi_to_u32(__u8 *ptr)
 517 {
 518         return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
 519 }
 520
 521 #endif /* _SCSI_SCSI_H */