xhci: Fix issue with port array setup and buggy hosts.
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pcmcia / bcm63xx_pcmcia.c
blob693577e0fefc3c52a037bd9af6e63567f67a43c8
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
7 */
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/ioport.h>
12 #include <linux/timer.h>
13 #include <linux/platform_device.h>
14 #include <linux/slab.h>
15 #include <linux/delay.h>
16 #include <linux/pci.h>
17 #include <linux/gpio.h>
19 #include <bcm63xx_regs.h>
20 #include <bcm63xx_io.h>
21 #include "bcm63xx_pcmcia.h"
23 #define PFX "bcm63xx_pcmcia: "
25 #ifdef CONFIG_CARDBUS
26 /* if cardbus is used, platform device needs reference to actual pci
27 * device */
28 static struct pci_dev *bcm63xx_cb_dev;
29 #endif
32 * read/write helper for pcmcia regs
34 static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
36 return bcm_readl(skt->base + off);
39 static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
40 u32 val, u32 off)
42 bcm_writel(val, skt->base + off);
46 * This callback should (re-)initialise the socket, turn on status
47 * interrupts and PCMCIA bus, and wait for power to stabilise so that
48 * the card status signals report correctly.
50 * Hardware cannot do that.
52 static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
54 return 0;
58 * This callback should remove power on the socket, disable IRQs from
59 * the card, turn off status interrupts, and disable the PCMCIA bus.
61 * Hardware cannot do that.
63 static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
65 return 0;
69 * Implements the set_socket() operation for the in-kernel PCMCIA
70 * service (formerly SS_SetSocket in Card Services). We more or
71 * less punt all of this work and let the kernel handle the details
72 * of power configuration, reset, &c. We also record the value of
73 * `state' in order to regurgitate it to the PCMCIA core later.
75 static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
76 socket_state_t *state)
78 struct bcm63xx_pcmcia_socket *skt;
79 unsigned long flags;
80 u32 val;
82 skt = sock->driver_data;
84 spin_lock_irqsave(&skt->lock, flags);
86 /* note: hardware cannot control socket power, so we will
87 * always report SS_POWERON */
89 /* apply socket reset */
90 val = pcmcia_readl(skt, PCMCIA_C1_REG);
91 if (state->flags & SS_RESET)
92 val |= PCMCIA_C1_RESET_MASK;
93 else
94 val &= ~PCMCIA_C1_RESET_MASK;
96 /* reverse reset logic for cardbus card */
97 if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
98 val ^= PCMCIA_C1_RESET_MASK;
100 pcmcia_writel(skt, val, PCMCIA_C1_REG);
102 /* keep requested state for event reporting */
103 skt->requested_state = *state;
105 spin_unlock_irqrestore(&skt->lock, flags);
107 return 0;
111 * identity cardtype from VS[12] input, CD[12] input while only VS2 is
112 * floating, and CD[12] input while only VS1 is floating
114 enum {
115 IN_VS1 = (1 << 0),
116 IN_VS2 = (1 << 1),
117 IN_CD1_VS2H = (1 << 2),
118 IN_CD2_VS2H = (1 << 3),
119 IN_CD1_VS1H = (1 << 4),
120 IN_CD2_VS1H = (1 << 5),
123 static const u8 vscd_to_cardtype[] = {
125 /* VS1 float, VS2 float */
126 [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
128 /* VS1 grounded, VS2 float */
129 [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
131 /* VS1 grounded, VS2 grounded */
132 [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
134 /* VS1 tied to CD1, VS2 float */
135 [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
137 /* VS1 grounded, VS2 tied to CD2 */
138 [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
140 /* VS1 tied to CD2, VS2 grounded */
141 [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
143 /* VS1 float, VS2 grounded */
144 [IN_VS1] = (CARD_PCCARD | CARD_XV),
146 /* VS1 float, VS2 tied to CD2 */
147 [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
149 /* VS1 float, VS2 tied to CD1 */
150 [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
152 /* VS1 tied to CD2, VS2 float */
153 [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
155 /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
156 [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
160 * poll hardware to check card insertion status
162 static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
164 unsigned int stat;
165 u32 val;
167 stat = 0;
169 /* check CD for card presence */
170 val = pcmcia_readl(skt, PCMCIA_C1_REG);
172 if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
173 stat |= SS_DETECT;
175 /* if new insertion, detect cardtype */
176 if ((stat & SS_DETECT) && !skt->card_detected) {
177 unsigned int stat = 0;
179 /* float VS1, float VS2 */
180 val |= PCMCIA_C1_VS1OE_MASK;
181 val |= PCMCIA_C1_VS2OE_MASK;
182 pcmcia_writel(skt, val, PCMCIA_C1_REG);
184 /* wait for output to stabilize and read VS[12] */
185 udelay(10);
186 val = pcmcia_readl(skt, PCMCIA_C1_REG);
187 stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
188 stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
190 /* drive VS1 low, float VS2 */
191 val &= ~PCMCIA_C1_VS1OE_MASK;
192 val |= PCMCIA_C1_VS2OE_MASK;
193 pcmcia_writel(skt, val, PCMCIA_C1_REG);
195 /* wait for output to stabilize and read CD[12] */
196 udelay(10);
197 val = pcmcia_readl(skt, PCMCIA_C1_REG);
198 stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
199 stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
201 /* float VS1, drive VS2 low */
202 val |= PCMCIA_C1_VS1OE_MASK;
203 val &= ~PCMCIA_C1_VS2OE_MASK;
204 pcmcia_writel(skt, val, PCMCIA_C1_REG);
206 /* wait for output to stabilize and read CD[12] */
207 udelay(10);
208 val = pcmcia_readl(skt, PCMCIA_C1_REG);
209 stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
210 stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
212 /* guess cardtype from all this */
213 skt->card_type = vscd_to_cardtype[stat];
214 if (!skt->card_type)
215 dev_err(&skt->socket.dev, "unsupported card type\n");
217 /* drive both VS pin to 0 again */
218 val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
220 /* enable correct logic */
221 val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
222 if (skt->card_type & CARD_PCCARD)
223 val |= PCMCIA_C1_EN_PCMCIA_MASK;
224 else
225 val |= PCMCIA_C1_EN_CARDBUS_MASK;
227 pcmcia_writel(skt, val, PCMCIA_C1_REG);
229 skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
231 /* report card type/voltage */
232 if (skt->card_type & CARD_CARDBUS)
233 stat |= SS_CARDBUS;
234 if (skt->card_type & CARD_3V)
235 stat |= SS_3VCARD;
236 if (skt->card_type & CARD_XV)
237 stat |= SS_XVCARD;
238 stat |= SS_POWERON;
240 if (gpio_get_value(skt->pd->ready_gpio))
241 stat |= SS_READY;
243 return stat;
247 * core request to get current socket status
249 static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
250 unsigned int *status)
252 struct bcm63xx_pcmcia_socket *skt;
254 skt = sock->driver_data;
256 spin_lock_bh(&skt->lock);
257 *status = __get_socket_status(skt);
258 spin_unlock_bh(&skt->lock);
260 return 0;
264 * socket polling timer callback
266 static void bcm63xx_pcmcia_poll(unsigned long data)
268 struct bcm63xx_pcmcia_socket *skt;
269 unsigned int stat, events;
271 skt = (struct bcm63xx_pcmcia_socket *)data;
273 spin_lock_bh(&skt->lock);
275 stat = __get_socket_status(skt);
277 /* keep only changed bits, and mask with required one from the
278 * core */
279 events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
280 skt->old_status = stat;
281 spin_unlock_bh(&skt->lock);
283 if (events)
284 pcmcia_parse_events(&skt->socket, events);
286 mod_timer(&skt->timer,
287 jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
290 static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
291 struct pccard_io_map *map)
293 /* this doesn't seem to be called by pcmcia layer if static
294 * mapping is used */
295 return 0;
298 static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
299 struct pccard_mem_map *map)
301 struct bcm63xx_pcmcia_socket *skt;
302 struct resource *res;
304 skt = sock->driver_data;
305 if (map->flags & MAP_ATTRIB)
306 res = skt->attr_res;
307 else
308 res = skt->common_res;
310 map->static_start = res->start + map->card_start;
311 return 0;
314 static struct pccard_operations bcm63xx_pcmcia_operations = {
315 .init = bcm63xx_pcmcia_sock_init,
316 .suspend = bcm63xx_pcmcia_suspend,
317 .get_status = bcm63xx_pcmcia_get_status,
318 .set_socket = bcm63xx_pcmcia_set_socket,
319 .set_io_map = bcm63xx_pcmcia_set_io_map,
320 .set_mem_map = bcm63xx_pcmcia_set_mem_map,
324 * register pcmcia socket to core
326 static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
328 struct bcm63xx_pcmcia_socket *skt;
329 struct pcmcia_socket *sock;
330 struct resource *res, *irq_res;
331 unsigned int regmem_size = 0, iomem_size = 0;
332 u32 val;
333 int ret;
335 skt = kzalloc(sizeof(*skt), GFP_KERNEL);
336 if (!skt)
337 return -ENOMEM;
338 spin_lock_init(&skt->lock);
339 sock = &skt->socket;
340 sock->driver_data = skt;
342 /* make sure we have all resources we need */
343 skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
344 skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
345 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
346 skt->pd = pdev->dev.platform_data;
347 if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
348 ret = -EINVAL;
349 goto err;
352 /* remap pcmcia registers */
353 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
354 regmem_size = resource_size(res);
355 if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
356 ret = -EINVAL;
357 goto err;
359 skt->reg_res = res;
361 skt->base = ioremap(res->start, regmem_size);
362 if (!skt->base) {
363 ret = -ENOMEM;
364 goto err;
367 /* remap io registers */
368 res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
369 iomem_size = resource_size(res);
370 skt->io_base = ioremap(res->start, iomem_size);
371 if (!skt->io_base) {
372 ret = -ENOMEM;
373 goto err;
376 /* resources are static */
377 sock->resource_ops = &pccard_static_ops;
378 sock->ops = &bcm63xx_pcmcia_operations;
379 sock->owner = THIS_MODULE;
380 sock->dev.parent = &pdev->dev;
381 sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
382 sock->io_offset = (unsigned long)skt->io_base;
383 sock->pci_irq = irq_res->start;
385 #ifdef CONFIG_CARDBUS
386 sock->cb_dev = bcm63xx_cb_dev;
387 if (bcm63xx_cb_dev)
388 sock->features |= SS_CAP_CARDBUS;
389 #endif
391 /* assume common & attribute memory have the same size */
392 sock->map_size = resource_size(skt->common_res);
394 /* initialize polling timer */
395 setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
397 /* initialize pcmcia control register, drive VS[12] to 0,
398 * leave CB IDSEL to the old value since it is set by the PCI
399 * layer */
400 val = pcmcia_readl(skt, PCMCIA_C1_REG);
401 val &= PCMCIA_C1_CBIDSEL_MASK;
402 val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
403 pcmcia_writel(skt, val, PCMCIA_C1_REG);
406 * Hardware has only one set of timings registers, not one for
407 * each memory access type, so we configure them for the
408 * slowest one: attribute memory.
410 val = PCMCIA_C2_DATA16_MASK;
411 val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
412 val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
413 val |= 3 << PCMCIA_C2_SETUP_SHIFT;
414 val |= 3 << PCMCIA_C2_HOLD_SHIFT;
415 pcmcia_writel(skt, val, PCMCIA_C2_REG);
417 ret = pcmcia_register_socket(sock);
418 if (ret)
419 goto err;
421 /* start polling socket */
422 mod_timer(&skt->timer,
423 jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
425 platform_set_drvdata(pdev, skt);
426 return 0;
428 err:
429 if (skt->io_base)
430 iounmap(skt->io_base);
431 if (skt->base)
432 iounmap(skt->base);
433 if (skt->reg_res)
434 release_mem_region(skt->reg_res->start, regmem_size);
435 kfree(skt);
436 return ret;
439 static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
441 struct bcm63xx_pcmcia_socket *skt;
442 struct resource *res;
444 skt = platform_get_drvdata(pdev);
445 del_timer_sync(&skt->timer);
446 iounmap(skt->base);
447 iounmap(skt->io_base);
448 res = skt->reg_res;
449 release_mem_region(res->start, resource_size(res));
450 kfree(skt);
451 return 0;
454 struct platform_driver bcm63xx_pcmcia_driver = {
455 .probe = bcm63xx_drv_pcmcia_probe,
456 .remove = __devexit_p(bcm63xx_drv_pcmcia_remove),
457 .driver = {
458 .name = "bcm63xx_pcmcia",
459 .owner = THIS_MODULE,
463 #ifdef CONFIG_CARDBUS
464 static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
465 const struct pci_device_id *id)
467 /* keep pci device */
468 bcm63xx_cb_dev = dev;
469 return platform_driver_register(&bcm63xx_pcmcia_driver);
472 static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
474 platform_driver_unregister(&bcm63xx_pcmcia_driver);
475 bcm63xx_cb_dev = NULL;
478 static struct pci_device_id bcm63xx_cb_table[] = {
480 .vendor = PCI_VENDOR_ID_BROADCOM,
481 .device = BCM6348_CPU_ID,
482 .subvendor = PCI_VENDOR_ID_BROADCOM,
483 .subdevice = PCI_ANY_ID,
484 .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
485 .class_mask = ~0,
489 .vendor = PCI_VENDOR_ID_BROADCOM,
490 .device = BCM6358_CPU_ID,
491 .subvendor = PCI_VENDOR_ID_BROADCOM,
492 .subdevice = PCI_ANY_ID,
493 .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
494 .class_mask = ~0,
497 { },
500 MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
502 static struct pci_driver bcm63xx_cardbus_driver = {
503 .name = "bcm63xx_cardbus",
504 .id_table = bcm63xx_cb_table,
505 .probe = bcm63xx_cb_probe,
506 .remove = __devexit_p(bcm63xx_cb_exit),
508 #endif
511 * if cardbus support is enabled, register our platform device after
512 * our fake cardbus bridge has been registered
514 static int __init bcm63xx_pcmcia_init(void)
516 #ifdef CONFIG_CARDBUS
517 return pci_register_driver(&bcm63xx_cardbus_driver);
518 #else
519 return platform_driver_register(&bcm63xx_pcmcia_driver);
520 #endif
523 static void __exit bcm63xx_pcmcia_exit(void)
525 #ifdef CONFIG_CARDBUS
526 return pci_unregister_driver(&bcm63xx_cardbus_driver);
527 #else
528 platform_driver_unregister(&bcm63xx_pcmcia_driver);
529 #endif
532 module_init(bcm63xx_pcmcia_init);
533 module_exit(bcm63xx_pcmcia_exit);
535 MODULE_LICENSE("GPL");
536 MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
537 MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");