[PATCH] x86-64: Fix warning in io_apic.c
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / x86_64 / kernel / io_apic.c
blobc80081a6ba415584553eea8c78377663914e4347
1 /*
2 * Intel IO-APIC support for multi-Pentium hosts.
4 * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
6 * Many thanks to Stig Venaas for trying out countless experimental
7 * patches and reporting/debugging problems patiently!
9 * (c) 1999, Multiple IO-APIC support, developed by
10 * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11 * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12 * further tested and cleaned up by Zach Brown <zab@redhat.com>
13 * and Ingo Molnar <mingo@redhat.com>
15 * Fixes
16 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
17 * thanks to Eric Gilmore
18 * and Rolf G. Tews
19 * for testing these extensively
20 * Paul Diefenbaugh : Added full ACPI support
23 #include <linux/mm.h>
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/smp_lock.h>
29 #include <linux/pci.h>
30 #include <linux/mc146818rtc.h>
31 #include <linux/acpi.h>
32 #include <linux/sysdev.h>
33 #include <linux/msi.h>
34 #include <linux/htirq.h>
35 #ifdef CONFIG_ACPI
36 #include <acpi/acpi_bus.h>
37 #endif
39 #include <asm/io.h>
40 #include <asm/smp.h>
41 #include <asm/desc.h>
42 #include <asm/proto.h>
43 #include <asm/mach_apic.h>
44 #include <asm/acpi.h>
45 #include <asm/dma.h>
46 #include <asm/nmi.h>
47 #include <asm/msidef.h>
48 #include <asm/hypertransport.h>
50 static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result);
52 #define __apicdebuginit __init
54 int sis_apic_bug; /* not actually supported, dummy for compile */
56 static int no_timer_check;
58 static int disable_timer_pin_1 __initdata;
60 int timer_over_8254 __initdata = 1;
62 /* Where if anywhere is the i8259 connect in external int mode */
63 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
65 static DEFINE_SPINLOCK(ioapic_lock);
66 DEFINE_SPINLOCK(vector_lock);
69 * # of IRQ routing registers
71 int nr_ioapic_registers[MAX_IO_APICS];
74 * Rough estimation of how many shared IRQs there are, can
75 * be changed anytime.
77 #define MAX_PLUS_SHARED_IRQS NR_IRQ_VECTORS
78 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
81 * This is performance-critical, we want to do it O(1)
83 * the indexing order of this array favors 1:1 mappings
84 * between pins and IRQs.
87 static struct irq_pin_list {
88 short apic, pin, next;
89 } irq_2_pin[PIN_MAP_SIZE];
91 struct io_apic {
92 unsigned int index;
93 unsigned int unused[3];
94 unsigned int data;
97 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
99 return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
100 + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
103 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
105 struct io_apic __iomem *io_apic = io_apic_base(apic);
106 writel(reg, &io_apic->index);
107 return readl(&io_apic->data);
110 static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
112 struct io_apic __iomem *io_apic = io_apic_base(apic);
113 writel(reg, &io_apic->index);
114 writel(value, &io_apic->data);
118 * Re-write a value: to be used for read-modify-write
119 * cycles where the read already set up the index register.
121 static inline void io_apic_modify(unsigned int apic, unsigned int value)
123 struct io_apic __iomem *io_apic = io_apic_base(apic);
124 writel(value, &io_apic->data);
128 * Synchronize the IO-APIC and the CPU by doing
129 * a dummy read from the IO-APIC
131 static inline void io_apic_sync(unsigned int apic)
133 struct io_apic __iomem *io_apic = io_apic_base(apic);
134 readl(&io_apic->data);
137 #define __DO_ACTION(R, ACTION, FINAL) \
140 int pin; \
141 struct irq_pin_list *entry = irq_2_pin + irq; \
143 BUG_ON(irq >= NR_IRQS); \
144 for (;;) { \
145 unsigned int reg; \
146 pin = entry->pin; \
147 if (pin == -1) \
148 break; \
149 reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \
150 reg ACTION; \
151 io_apic_modify(entry->apic, reg); \
152 if (!entry->next) \
153 break; \
154 entry = irq_2_pin + entry->next; \
156 FINAL; \
159 union entry_union {
160 struct { u32 w1, w2; };
161 struct IO_APIC_route_entry entry;
164 static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
166 union entry_union eu;
167 unsigned long flags;
168 spin_lock_irqsave(&ioapic_lock, flags);
169 eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
170 eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
171 spin_unlock_irqrestore(&ioapic_lock, flags);
172 return eu.entry;
176 * When we write a new IO APIC routing entry, we need to write the high
177 * word first! If the mask bit in the low word is clear, we will enable
178 * the interrupt, and we need to make sure the entry is fully populated
179 * before that happens.
181 static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
183 unsigned long flags;
184 union entry_union eu;
185 eu.entry = e;
186 spin_lock_irqsave(&ioapic_lock, flags);
187 io_apic_write(apic, 0x11 + 2*pin, eu.w2);
188 io_apic_write(apic, 0x10 + 2*pin, eu.w1);
189 spin_unlock_irqrestore(&ioapic_lock, flags);
193 * When we mask an IO APIC routing entry, we need to write the low
194 * word first, in order to set the mask bit before we change the
195 * high bits!
197 static void ioapic_mask_entry(int apic, int pin)
199 unsigned long flags;
200 union entry_union eu = { .entry.mask = 1 };
202 spin_lock_irqsave(&ioapic_lock, flags);
203 io_apic_write(apic, 0x10 + 2*pin, eu.w1);
204 io_apic_write(apic, 0x11 + 2*pin, eu.w2);
205 spin_unlock_irqrestore(&ioapic_lock, flags);
208 #ifdef CONFIG_SMP
209 static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
211 int apic, pin;
212 struct irq_pin_list *entry = irq_2_pin + irq;
214 BUG_ON(irq >= NR_IRQS);
215 for (;;) {
216 unsigned int reg;
217 apic = entry->apic;
218 pin = entry->pin;
219 if (pin == -1)
220 break;
221 io_apic_write(apic, 0x11 + pin*2, dest);
222 reg = io_apic_read(apic, 0x10 + pin*2);
223 reg &= ~0x000000ff;
224 reg |= vector;
225 io_apic_modify(apic, reg);
226 if (!entry->next)
227 break;
228 entry = irq_2_pin + entry->next;
232 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
234 unsigned long flags;
235 unsigned int dest;
236 cpumask_t tmp;
237 int vector;
239 cpus_and(tmp, mask, cpu_online_map);
240 if (cpus_empty(tmp))
241 tmp = TARGET_CPUS;
243 cpus_and(mask, tmp, CPU_MASK_ALL);
245 vector = assign_irq_vector(irq, mask, &tmp);
246 if (vector < 0)
247 return;
249 dest = cpu_mask_to_apicid(tmp);
252 * Only the high 8 bits are valid.
254 dest = SET_APIC_LOGICAL_ID(dest);
256 spin_lock_irqsave(&ioapic_lock, flags);
257 __target_IO_APIC_irq(irq, dest, vector);
258 set_native_irq_info(irq, mask);
259 spin_unlock_irqrestore(&ioapic_lock, flags);
261 #endif
264 * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
265 * shared ISA-space IRQs, so we have to support them. We are super
266 * fast in the common case, and fast for shared ISA-space IRQs.
268 static void add_pin_to_irq(unsigned int irq, int apic, int pin)
270 static int first_free_entry = NR_IRQS;
271 struct irq_pin_list *entry = irq_2_pin + irq;
273 BUG_ON(irq >= NR_IRQS);
274 while (entry->next)
275 entry = irq_2_pin + entry->next;
277 if (entry->pin != -1) {
278 entry->next = first_free_entry;
279 entry = irq_2_pin + entry->next;
280 if (++first_free_entry >= PIN_MAP_SIZE)
281 panic("io_apic.c: ran out of irq_2_pin entries!");
283 entry->apic = apic;
284 entry->pin = pin;
288 #define DO_ACTION(name,R,ACTION, FINAL) \
290 static void name##_IO_APIC_irq (unsigned int irq) \
291 __DO_ACTION(R, ACTION, FINAL)
293 DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) )
294 /* mask = 1 */
295 DO_ACTION( __unmask, 0, &= 0xfffeffff, )
296 /* mask = 0 */
298 static void mask_IO_APIC_irq (unsigned int irq)
300 unsigned long flags;
302 spin_lock_irqsave(&ioapic_lock, flags);
303 __mask_IO_APIC_irq(irq);
304 spin_unlock_irqrestore(&ioapic_lock, flags);
307 static void unmask_IO_APIC_irq (unsigned int irq)
309 unsigned long flags;
311 spin_lock_irqsave(&ioapic_lock, flags);
312 __unmask_IO_APIC_irq(irq);
313 spin_unlock_irqrestore(&ioapic_lock, flags);
316 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
318 struct IO_APIC_route_entry entry;
320 /* Check delivery_mode to be sure we're not clearing an SMI pin */
321 entry = ioapic_read_entry(apic, pin);
322 if (entry.delivery_mode == dest_SMI)
323 return;
325 * Disable it in the IO-APIC irq-routing table:
327 ioapic_mask_entry(apic, pin);
330 static void clear_IO_APIC (void)
332 int apic, pin;
334 for (apic = 0; apic < nr_ioapics; apic++)
335 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
336 clear_IO_APIC_pin(apic, pin);
339 int skip_ioapic_setup;
340 int ioapic_force;
342 /* dummy parsing: see setup.c */
344 static int __init disable_ioapic_setup(char *str)
346 skip_ioapic_setup = 1;
347 return 0;
349 early_param("noapic", disable_ioapic_setup);
351 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
352 static int __init disable_timer_pin_setup(char *arg)
354 disable_timer_pin_1 = 1;
355 return 1;
357 __setup("disable_timer_pin_1", disable_timer_pin_setup);
359 static int __init setup_disable_8254_timer(char *s)
361 timer_over_8254 = -1;
362 return 1;
364 static int __init setup_enable_8254_timer(char *s)
366 timer_over_8254 = 2;
367 return 1;
370 __setup("disable_8254_timer", setup_disable_8254_timer);
371 __setup("enable_8254_timer", setup_enable_8254_timer);
375 * Find the IRQ entry number of a certain pin.
377 static int find_irq_entry(int apic, int pin, int type)
379 int i;
381 for (i = 0; i < mp_irq_entries; i++)
382 if (mp_irqs[i].mpc_irqtype == type &&
383 (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
384 mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
385 mp_irqs[i].mpc_dstirq == pin)
386 return i;
388 return -1;
392 * Find the pin to which IRQ[irq] (ISA) is connected
394 static int __init find_isa_irq_pin(int irq, int type)
396 int i;
398 for (i = 0; i < mp_irq_entries; i++) {
399 int lbus = mp_irqs[i].mpc_srcbus;
401 if (test_bit(lbus, mp_bus_not_pci) &&
402 (mp_irqs[i].mpc_irqtype == type) &&
403 (mp_irqs[i].mpc_srcbusirq == irq))
405 return mp_irqs[i].mpc_dstirq;
407 return -1;
410 static int __init find_isa_irq_apic(int irq, int type)
412 int i;
414 for (i = 0; i < mp_irq_entries; i++) {
415 int lbus = mp_irqs[i].mpc_srcbus;
417 if (test_bit(lbus, mp_bus_not_pci) &&
418 (mp_irqs[i].mpc_irqtype == type) &&
419 (mp_irqs[i].mpc_srcbusirq == irq))
420 break;
422 if (i < mp_irq_entries) {
423 int apic;
424 for(apic = 0; apic < nr_ioapics; apic++) {
425 if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
426 return apic;
430 return -1;
434 * Find a specific PCI IRQ entry.
435 * Not an __init, possibly needed by modules
437 static int pin_2_irq(int idx, int apic, int pin);
439 int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
441 int apic, i, best_guess = -1;
443 apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
444 bus, slot, pin);
445 if (mp_bus_id_to_pci_bus[bus] == -1) {
446 apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
447 return -1;
449 for (i = 0; i < mp_irq_entries; i++) {
450 int lbus = mp_irqs[i].mpc_srcbus;
452 for (apic = 0; apic < nr_ioapics; apic++)
453 if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
454 mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
455 break;
457 if (!test_bit(lbus, mp_bus_not_pci) &&
458 !mp_irqs[i].mpc_irqtype &&
459 (bus == lbus) &&
460 (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
461 int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
463 if (!(apic || IO_APIC_IRQ(irq)))
464 continue;
466 if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
467 return irq;
469 * Use the first all-but-pin matching entry as a
470 * best-guess fuzzy result for broken mptables.
472 if (best_guess < 0)
473 best_guess = irq;
476 BUG_ON(best_guess >= NR_IRQS);
477 return best_guess;
480 /* ISA interrupts are always polarity zero edge triggered,
481 * when listed as conforming in the MP table. */
483 #define default_ISA_trigger(idx) (0)
484 #define default_ISA_polarity(idx) (0)
486 /* PCI interrupts are always polarity one level triggered,
487 * when listed as conforming in the MP table. */
489 #define default_PCI_trigger(idx) (1)
490 #define default_PCI_polarity(idx) (1)
492 static int __init MPBIOS_polarity(int idx)
494 int bus = mp_irqs[idx].mpc_srcbus;
495 int polarity;
498 * Determine IRQ line polarity (high active or low active):
500 switch (mp_irqs[idx].mpc_irqflag & 3)
502 case 0: /* conforms, ie. bus-type dependent polarity */
503 if (test_bit(bus, mp_bus_not_pci))
504 polarity = default_ISA_polarity(idx);
505 else
506 polarity = default_PCI_polarity(idx);
507 break;
508 case 1: /* high active */
510 polarity = 0;
511 break;
513 case 2: /* reserved */
515 printk(KERN_WARNING "broken BIOS!!\n");
516 polarity = 1;
517 break;
519 case 3: /* low active */
521 polarity = 1;
522 break;
524 default: /* invalid */
526 printk(KERN_WARNING "broken BIOS!!\n");
527 polarity = 1;
528 break;
531 return polarity;
534 static int MPBIOS_trigger(int idx)
536 int bus = mp_irqs[idx].mpc_srcbus;
537 int trigger;
540 * Determine IRQ trigger mode (edge or level sensitive):
542 switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
544 case 0: /* conforms, ie. bus-type dependent */
545 if (test_bit(bus, mp_bus_not_pci))
546 trigger = default_ISA_trigger(idx);
547 else
548 trigger = default_PCI_trigger(idx);
549 break;
550 case 1: /* edge */
552 trigger = 0;
553 break;
555 case 2: /* reserved */
557 printk(KERN_WARNING "broken BIOS!!\n");
558 trigger = 1;
559 break;
561 case 3: /* level */
563 trigger = 1;
564 break;
566 default: /* invalid */
568 printk(KERN_WARNING "broken BIOS!!\n");
569 trigger = 0;
570 break;
573 return trigger;
576 static inline int irq_polarity(int idx)
578 return MPBIOS_polarity(idx);
581 static inline int irq_trigger(int idx)
583 return MPBIOS_trigger(idx);
586 static int pin_2_irq(int idx, int apic, int pin)
588 int irq, i;
589 int bus = mp_irqs[idx].mpc_srcbus;
592 * Debugging check, we are in big trouble if this message pops up!
594 if (mp_irqs[idx].mpc_dstirq != pin)
595 printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
597 if (test_bit(bus, mp_bus_not_pci)) {
598 irq = mp_irqs[idx].mpc_srcbusirq;
599 } else {
601 * PCI IRQs are mapped in order
603 i = irq = 0;
604 while (i < apic)
605 irq += nr_ioapic_registers[i++];
606 irq += pin;
608 BUG_ON(irq >= NR_IRQS);
609 return irq;
612 static inline int IO_APIC_irq_trigger(int irq)
614 int apic, idx, pin;
616 for (apic = 0; apic < nr_ioapics; apic++) {
617 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
618 idx = find_irq_entry(apic,pin,mp_INT);
619 if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
620 return irq_trigger(idx);
624 * nonexistent IRQs are edge default
626 return 0;
629 /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
630 static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = {
631 [0] = FIRST_EXTERNAL_VECTOR + 0,
632 [1] = FIRST_EXTERNAL_VECTOR + 1,
633 [2] = FIRST_EXTERNAL_VECTOR + 2,
634 [3] = FIRST_EXTERNAL_VECTOR + 3,
635 [4] = FIRST_EXTERNAL_VECTOR + 4,
636 [5] = FIRST_EXTERNAL_VECTOR + 5,
637 [6] = FIRST_EXTERNAL_VECTOR + 6,
638 [7] = FIRST_EXTERNAL_VECTOR + 7,
639 [8] = FIRST_EXTERNAL_VECTOR + 8,
640 [9] = FIRST_EXTERNAL_VECTOR + 9,
641 [10] = FIRST_EXTERNAL_VECTOR + 10,
642 [11] = FIRST_EXTERNAL_VECTOR + 11,
643 [12] = FIRST_EXTERNAL_VECTOR + 12,
644 [13] = FIRST_EXTERNAL_VECTOR + 13,
645 [14] = FIRST_EXTERNAL_VECTOR + 14,
646 [15] = FIRST_EXTERNAL_VECTOR + 15,
649 static cpumask_t irq_domain[NR_IRQ_VECTORS] __read_mostly = {
650 [0] = CPU_MASK_ALL,
651 [1] = CPU_MASK_ALL,
652 [2] = CPU_MASK_ALL,
653 [3] = CPU_MASK_ALL,
654 [4] = CPU_MASK_ALL,
655 [5] = CPU_MASK_ALL,
656 [6] = CPU_MASK_ALL,
657 [7] = CPU_MASK_ALL,
658 [8] = CPU_MASK_ALL,
659 [9] = CPU_MASK_ALL,
660 [10] = CPU_MASK_ALL,
661 [11] = CPU_MASK_ALL,
662 [12] = CPU_MASK_ALL,
663 [13] = CPU_MASK_ALL,
664 [14] = CPU_MASK_ALL,
665 [15] = CPU_MASK_ALL,
668 static int __assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
671 * NOTE! The local APIC isn't very good at handling
672 * multiple interrupts at the same interrupt level.
673 * As the interrupt level is determined by taking the
674 * vector number and shifting that right by 4, we
675 * want to spread these out a bit so that they don't
676 * all fall in the same interrupt level.
678 * Also, we've got to be careful not to trash gate
679 * 0x80, because int 0x80 is hm, kind of importantish. ;)
681 static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
682 int old_vector = -1;
683 int cpu;
685 BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
687 /* Only try and allocate irqs on cpus that are present */
688 cpus_and(mask, mask, cpu_online_map);
690 if (irq_vector[irq] > 0)
691 old_vector = irq_vector[irq];
692 if (old_vector > 0) {
693 cpus_and(*result, irq_domain[irq], mask);
694 if (!cpus_empty(*result))
695 return old_vector;
698 for_each_cpu_mask(cpu, mask) {
699 cpumask_t domain, new_mask;
700 int new_cpu;
701 int vector, offset;
703 domain = vector_allocation_domain(cpu);
704 cpus_and(new_mask, domain, cpu_online_map);
706 vector = current_vector;
707 offset = current_offset;
708 next:
709 vector += 8;
710 if (vector >= FIRST_SYSTEM_VECTOR) {
711 /* If we run out of vectors on large boxen, must share them. */
712 offset = (offset + 1) % 8;
713 vector = FIRST_DEVICE_VECTOR + offset;
715 if (unlikely(current_vector == vector))
716 continue;
717 if (vector == IA32_SYSCALL_VECTOR)
718 goto next;
719 for_each_cpu_mask(new_cpu, new_mask)
720 if (per_cpu(vector_irq, new_cpu)[vector] != -1)
721 goto next;
722 /* Found one! */
723 current_vector = vector;
724 current_offset = offset;
725 if (old_vector >= 0) {
726 cpumask_t old_mask;
727 int old_cpu;
728 cpus_and(old_mask, irq_domain[irq], cpu_online_map);
729 for_each_cpu_mask(old_cpu, old_mask)
730 per_cpu(vector_irq, old_cpu)[old_vector] = -1;
732 for_each_cpu_mask(new_cpu, new_mask)
733 per_cpu(vector_irq, new_cpu)[vector] = irq;
734 irq_vector[irq] = vector;
735 irq_domain[irq] = domain;
736 cpus_and(*result, domain, mask);
737 return vector;
739 return -ENOSPC;
742 static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
744 int vector;
745 unsigned long flags;
747 spin_lock_irqsave(&vector_lock, flags);
748 vector = __assign_irq_vector(irq, mask, result);
749 spin_unlock_irqrestore(&vector_lock, flags);
750 return vector;
753 void __setup_vector_irq(int cpu)
755 /* Initialize vector_irq on a new cpu */
756 /* This function must be called with vector_lock held */
757 int irq, vector;
759 /* Mark the inuse vectors */
760 for (irq = 0; irq < NR_IRQ_VECTORS; ++irq) {
761 if (!cpu_isset(cpu, irq_domain[irq]))
762 continue;
763 vector = irq_vector[irq];
764 per_cpu(vector_irq, cpu)[vector] = irq;
766 /* Mark the free vectors */
767 for (vector = 0; vector < NR_VECTORS; ++vector) {
768 irq = per_cpu(vector_irq, cpu)[vector];
769 if (irq < 0)
770 continue;
771 if (!cpu_isset(cpu, irq_domain[irq]))
772 per_cpu(vector_irq, cpu)[vector] = -1;
777 extern void (*interrupt[NR_IRQS])(void);
779 static struct irq_chip ioapic_chip;
781 #define IOAPIC_AUTO -1
782 #define IOAPIC_EDGE 0
783 #define IOAPIC_LEVEL 1
785 static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
787 if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
788 trigger == IOAPIC_LEVEL)
789 set_irq_chip_and_handler_name(irq, &ioapic_chip,
790 handle_fasteoi_irq, "fasteoi");
791 else {
792 irq_desc[irq].status |= IRQ_DELAYED_DISABLE;
793 set_irq_chip_and_handler_name(irq, &ioapic_chip,
794 handle_edge_irq, "edge");
798 static void __init setup_IO_APIC_irqs(void)
800 struct IO_APIC_route_entry entry;
801 int apic, pin, idx, irq, first_notcon = 1, vector;
802 unsigned long flags;
804 apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
806 for (apic = 0; apic < nr_ioapics; apic++) {
807 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
810 * add it to the IO-APIC irq-routing table:
812 memset(&entry,0,sizeof(entry));
814 entry.delivery_mode = INT_DELIVERY_MODE;
815 entry.dest_mode = INT_DEST_MODE;
816 entry.mask = 0; /* enable IRQ */
817 entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
819 idx = find_irq_entry(apic,pin,mp_INT);
820 if (idx == -1) {
821 if (first_notcon) {
822 apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
823 first_notcon = 0;
824 } else
825 apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
826 continue;
829 entry.trigger = irq_trigger(idx);
830 entry.polarity = irq_polarity(idx);
832 if (irq_trigger(idx)) {
833 entry.trigger = 1;
834 entry.mask = 1;
835 entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
838 irq = pin_2_irq(idx, apic, pin);
839 add_pin_to_irq(irq, apic, pin);
841 if (!apic && !IO_APIC_IRQ(irq))
842 continue;
844 if (IO_APIC_IRQ(irq)) {
845 cpumask_t mask;
846 vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
847 if (vector < 0)
848 continue;
850 entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask);
851 entry.vector = vector;
853 ioapic_register_intr(irq, vector, IOAPIC_AUTO);
854 if (!apic && (irq < 16))
855 disable_8259A_irq(irq);
857 ioapic_write_entry(apic, pin, entry);
859 spin_lock_irqsave(&ioapic_lock, flags);
860 set_native_irq_info(irq, TARGET_CPUS);
861 spin_unlock_irqrestore(&ioapic_lock, flags);
865 if (!first_notcon)
866 apic_printk(APIC_VERBOSE," not connected.\n");
870 * Set up the 8259A-master output pin as broadcast to all
871 * CPUs.
873 static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
875 struct IO_APIC_route_entry entry;
876 unsigned long flags;
878 memset(&entry,0,sizeof(entry));
880 disable_8259A_irq(0);
882 /* mask LVT0 */
883 apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
886 * We use logical delivery to get the timer IRQ
887 * to the first CPU.
889 entry.dest_mode = INT_DEST_MODE;
890 entry.mask = 0; /* unmask IRQ now */
891 entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
892 entry.delivery_mode = INT_DELIVERY_MODE;
893 entry.polarity = 0;
894 entry.trigger = 0;
895 entry.vector = vector;
898 * The timer IRQ doesn't have to know that behind the
899 * scene we have a 8259A-master in AEOI mode ...
901 set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
904 * Add it to the IO-APIC irq-routing table:
906 spin_lock_irqsave(&ioapic_lock, flags);
907 io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
908 io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
909 spin_unlock_irqrestore(&ioapic_lock, flags);
911 enable_8259A_irq(0);
914 void __init UNEXPECTED_IO_APIC(void)
918 void __apicdebuginit print_IO_APIC(void)
920 int apic, i;
921 union IO_APIC_reg_00 reg_00;
922 union IO_APIC_reg_01 reg_01;
923 union IO_APIC_reg_02 reg_02;
924 unsigned long flags;
926 if (apic_verbosity == APIC_QUIET)
927 return;
929 printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
930 for (i = 0; i < nr_ioapics; i++)
931 printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
932 mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
935 * We are a bit conservative about what we expect. We have to
936 * know about every hardware change ASAP.
938 printk(KERN_INFO "testing the IO APIC.......................\n");
940 for (apic = 0; apic < nr_ioapics; apic++) {
942 spin_lock_irqsave(&ioapic_lock, flags);
943 reg_00.raw = io_apic_read(apic, 0);
944 reg_01.raw = io_apic_read(apic, 1);
945 if (reg_01.bits.version >= 0x10)
946 reg_02.raw = io_apic_read(apic, 2);
947 spin_unlock_irqrestore(&ioapic_lock, flags);
949 printk("\n");
950 printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
951 printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
952 printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
953 if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
954 UNEXPECTED_IO_APIC();
956 printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
957 printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries);
958 if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */
959 (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */
960 (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */
961 (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */
962 (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */
963 (reg_01.bits.entries != 0x2E) &&
964 (reg_01.bits.entries != 0x3F) &&
965 (reg_01.bits.entries != 0x03)
967 UNEXPECTED_IO_APIC();
969 printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ);
970 printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version);
971 if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */
972 (reg_01.bits.version != 0x02) && /* 82801BA IO-APICs (ICH2) */
973 (reg_01.bits.version != 0x10) && /* oldest IO-APICs */
974 (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */
975 (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */
976 (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */
978 UNEXPECTED_IO_APIC();
979 if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2)
980 UNEXPECTED_IO_APIC();
982 if (reg_01.bits.version >= 0x10) {
983 printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
984 printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration);
985 if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2)
986 UNEXPECTED_IO_APIC();
989 printk(KERN_DEBUG ".... IRQ redirection table:\n");
991 printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
992 " Stat Dest Deli Vect: \n");
994 for (i = 0; i <= reg_01.bits.entries; i++) {
995 struct IO_APIC_route_entry entry;
997 entry = ioapic_read_entry(apic, i);
999 printk(KERN_DEBUG " %02x %03X %02X ",
1001 entry.dest.logical.logical_dest,
1002 entry.dest.physical.physical_dest
1005 printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
1006 entry.mask,
1007 entry.trigger,
1008 entry.irr,
1009 entry.polarity,
1010 entry.delivery_status,
1011 entry.dest_mode,
1012 entry.delivery_mode,
1013 entry.vector
1017 printk(KERN_DEBUG "IRQ to pin mappings:\n");
1018 for (i = 0; i < NR_IRQS; i++) {
1019 struct irq_pin_list *entry = irq_2_pin + i;
1020 if (entry->pin < 0)
1021 continue;
1022 printk(KERN_DEBUG "IRQ%d ", i);
1023 for (;;) {
1024 printk("-> %d:%d", entry->apic, entry->pin);
1025 if (!entry->next)
1026 break;
1027 entry = irq_2_pin + entry->next;
1029 printk("\n");
1032 printk(KERN_INFO ".................................... done.\n");
1034 return;
1037 #if 0
1039 static __apicdebuginit void print_APIC_bitfield (int base)
1041 unsigned int v;
1042 int i, j;
1044 if (apic_verbosity == APIC_QUIET)
1045 return;
1047 printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
1048 for (i = 0; i < 8; i++) {
1049 v = apic_read(base + i*0x10);
1050 for (j = 0; j < 32; j++) {
1051 if (v & (1<<j))
1052 printk("1");
1053 else
1054 printk("0");
1056 printk("\n");
1060 void __apicdebuginit print_local_APIC(void * dummy)
1062 unsigned int v, ver, maxlvt;
1064 if (apic_verbosity == APIC_QUIET)
1065 return;
1067 printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
1068 smp_processor_id(), hard_smp_processor_id());
1069 v = apic_read(APIC_ID);
1070 printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v));
1071 v = apic_read(APIC_LVR);
1072 printk(KERN_INFO "... APIC VERSION: %08x\n", v);
1073 ver = GET_APIC_VERSION(v);
1074 maxlvt = get_maxlvt();
1076 v = apic_read(APIC_TASKPRI);
1077 printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
1079 v = apic_read(APIC_ARBPRI);
1080 printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
1081 v & APIC_ARBPRI_MASK);
1082 v = apic_read(APIC_PROCPRI);
1083 printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
1085 v = apic_read(APIC_EOI);
1086 printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
1087 v = apic_read(APIC_RRR);
1088 printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
1089 v = apic_read(APIC_LDR);
1090 printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
1091 v = apic_read(APIC_DFR);
1092 printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
1093 v = apic_read(APIC_SPIV);
1094 printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
1096 printk(KERN_DEBUG "... APIC ISR field:\n");
1097 print_APIC_bitfield(APIC_ISR);
1098 printk(KERN_DEBUG "... APIC TMR field:\n");
1099 print_APIC_bitfield(APIC_TMR);
1100 printk(KERN_DEBUG "... APIC IRR field:\n");
1101 print_APIC_bitfield(APIC_IRR);
1103 v = apic_read(APIC_ESR);
1104 printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
1106 v = apic_read(APIC_ICR);
1107 printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
1108 v = apic_read(APIC_ICR2);
1109 printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
1111 v = apic_read(APIC_LVTT);
1112 printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
1114 if (maxlvt > 3) { /* PC is LVT#4. */
1115 v = apic_read(APIC_LVTPC);
1116 printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
1118 v = apic_read(APIC_LVT0);
1119 printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
1120 v = apic_read(APIC_LVT1);
1121 printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
1123 if (maxlvt > 2) { /* ERR is LVT#3. */
1124 v = apic_read(APIC_LVTERR);
1125 printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
1128 v = apic_read(APIC_TMICT);
1129 printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
1130 v = apic_read(APIC_TMCCT);
1131 printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
1132 v = apic_read(APIC_TDCR);
1133 printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
1134 printk("\n");
1137 void print_all_local_APICs (void)
1139 on_each_cpu(print_local_APIC, NULL, 1, 1);
1142 void __apicdebuginit print_PIC(void)
1144 unsigned int v;
1145 unsigned long flags;
1147 if (apic_verbosity == APIC_QUIET)
1148 return;
1150 printk(KERN_DEBUG "\nprinting PIC contents\n");
1152 spin_lock_irqsave(&i8259A_lock, flags);
1154 v = inb(0xa1) << 8 | inb(0x21);
1155 printk(KERN_DEBUG "... PIC IMR: %04x\n", v);
1157 v = inb(0xa0) << 8 | inb(0x20);
1158 printk(KERN_DEBUG "... PIC IRR: %04x\n", v);
1160 outb(0x0b,0xa0);
1161 outb(0x0b,0x20);
1162 v = inb(0xa0) << 8 | inb(0x20);
1163 outb(0x0a,0xa0);
1164 outb(0x0a,0x20);
1166 spin_unlock_irqrestore(&i8259A_lock, flags);
1168 printk(KERN_DEBUG "... PIC ISR: %04x\n", v);
1170 v = inb(0x4d1) << 8 | inb(0x4d0);
1171 printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
1174 #endif /* 0 */
1176 static void __init enable_IO_APIC(void)
1178 union IO_APIC_reg_01 reg_01;
1179 int i8259_apic, i8259_pin;
1180 int i, apic;
1181 unsigned long flags;
1183 for (i = 0; i < PIN_MAP_SIZE; i++) {
1184 irq_2_pin[i].pin = -1;
1185 irq_2_pin[i].next = 0;
1189 * The number of IO-APIC IRQ registers (== #pins):
1191 for (apic = 0; apic < nr_ioapics; apic++) {
1192 spin_lock_irqsave(&ioapic_lock, flags);
1193 reg_01.raw = io_apic_read(apic, 1);
1194 spin_unlock_irqrestore(&ioapic_lock, flags);
1195 nr_ioapic_registers[apic] = reg_01.bits.entries+1;
1197 for(apic = 0; apic < nr_ioapics; apic++) {
1198 int pin;
1199 /* See if any of the pins is in ExtINT mode */
1200 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1201 struct IO_APIC_route_entry entry;
1202 entry = ioapic_read_entry(apic, pin);
1204 /* If the interrupt line is enabled and in ExtInt mode
1205 * I have found the pin where the i8259 is connected.
1207 if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
1208 ioapic_i8259.apic = apic;
1209 ioapic_i8259.pin = pin;
1210 goto found_i8259;
1214 found_i8259:
1215 /* Look to see what if the MP table has reported the ExtINT */
1216 i8259_pin = find_isa_irq_pin(0, mp_ExtINT);
1217 i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
1218 /* Trust the MP table if nothing is setup in the hardware */
1219 if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
1220 printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
1221 ioapic_i8259.pin = i8259_pin;
1222 ioapic_i8259.apic = i8259_apic;
1224 /* Complain if the MP table and the hardware disagree */
1225 if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
1226 (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
1228 printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
1232 * Do not trust the IO-APIC being empty at bootup
1234 clear_IO_APIC();
1238 * Not an __init, needed by the reboot code
1240 void disable_IO_APIC(void)
1243 * Clear the IO-APIC before rebooting:
1245 clear_IO_APIC();
1248 * If the i8259 is routed through an IOAPIC
1249 * Put that IOAPIC in virtual wire mode
1250 * so legacy interrupts can be delivered.
1252 if (ioapic_i8259.pin != -1) {
1253 struct IO_APIC_route_entry entry;
1255 memset(&entry, 0, sizeof(entry));
1256 entry.mask = 0; /* Enabled */
1257 entry.trigger = 0; /* Edge */
1258 entry.irr = 0;
1259 entry.polarity = 0; /* High */
1260 entry.delivery_status = 0;
1261 entry.dest_mode = 0; /* Physical */
1262 entry.delivery_mode = dest_ExtINT; /* ExtInt */
1263 entry.vector = 0;
1264 entry.dest.physical.physical_dest =
1265 GET_APIC_ID(apic_read(APIC_ID));
1268 * Add it to the IO-APIC irq-routing table:
1270 ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
1273 disconnect_bsp_APIC(ioapic_i8259.pin != -1);
1277 * There is a nasty bug in some older SMP boards, their mptable lies
1278 * about the timer IRQ. We do the following to work around the situation:
1280 * - timer IRQ defaults to IO-APIC IRQ
1281 * - if this function detects that timer IRQs are defunct, then we fall
1282 * back to ISA timer IRQs
1284 static int __init timer_irq_works(void)
1286 unsigned long t1 = jiffies;
1288 local_irq_enable();
1289 /* Let ten ticks pass... */
1290 mdelay((10 * 1000) / HZ);
1293 * Expect a few ticks at least, to be sure some possible
1294 * glue logic does not lock up after one or two first
1295 * ticks in a non-ExtINT mode. Also the local APIC
1296 * might have cached one ExtINT interrupt. Finally, at
1297 * least one tick may be lost due to delays.
1300 /* jiffies wrap? */
1301 if (jiffies - t1 > 4)
1302 return 1;
1303 return 0;
1307 * In the SMP+IOAPIC case it might happen that there are an unspecified
1308 * number of pending IRQ events unhandled. These cases are very rare,
1309 * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
1310 * better to do it this way as thus we do not have to be aware of
1311 * 'pending' interrupts in the IRQ path, except at this point.
1314 * Edge triggered needs to resend any interrupt
1315 * that was delayed but this is now handled in the device
1316 * independent code.
1320 * Starting up a edge-triggered IO-APIC interrupt is
1321 * nasty - we need to make sure that we get the edge.
1322 * If it is already asserted for some reason, we need
1323 * return 1 to indicate that is was pending.
1325 * This is not complete - we should be able to fake
1326 * an edge even if it isn't on the 8259A...
1329 static unsigned int startup_ioapic_irq(unsigned int irq)
1331 int was_pending = 0;
1332 unsigned long flags;
1334 spin_lock_irqsave(&ioapic_lock, flags);
1335 if (irq < 16) {
1336 disable_8259A_irq(irq);
1337 if (i8259A_irq_pending(irq))
1338 was_pending = 1;
1340 __unmask_IO_APIC_irq(irq);
1341 spin_unlock_irqrestore(&ioapic_lock, flags);
1343 return was_pending;
1346 static int ioapic_retrigger_irq(unsigned int irq)
1348 cpumask_t mask;
1349 unsigned vector;
1350 unsigned long flags;
1352 spin_lock_irqsave(&vector_lock, flags);
1353 vector = irq_vector[irq];
1354 cpus_clear(mask);
1355 cpu_set(first_cpu(irq_domain[irq]), mask);
1357 send_IPI_mask(mask, vector);
1358 spin_unlock_irqrestore(&vector_lock, flags);
1360 return 1;
1364 * Level and edge triggered IO-APIC interrupts need different handling,
1365 * so we use two separate IRQ descriptors. Edge triggered IRQs can be
1366 * handled with the level-triggered descriptor, but that one has slightly
1367 * more overhead. Level-triggered interrupts cannot be handled with the
1368 * edge-triggered handler, without risking IRQ storms and other ugly
1369 * races.
1372 static void ack_apic_edge(unsigned int irq)
1374 move_native_irq(irq);
1375 ack_APIC_irq();
1378 static void ack_apic_level(unsigned int irq)
1380 int do_unmask_irq = 0;
1382 #if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE)
1383 /* If we are moving the irq we need to mask it */
1384 if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
1385 do_unmask_irq = 1;
1386 mask_IO_APIC_irq(irq);
1388 #endif
1391 * We must acknowledge the irq before we move it or the acknowledge will
1392 * not propogate properly.
1394 ack_APIC_irq();
1396 /* Now we can move and renable the irq */
1397 move_masked_irq(irq);
1398 if (unlikely(do_unmask_irq))
1399 unmask_IO_APIC_irq(irq);
1402 static struct irq_chip ioapic_chip __read_mostly = {
1403 .name = "IO-APIC",
1404 .startup = startup_ioapic_irq,
1405 .mask = mask_IO_APIC_irq,
1406 .unmask = unmask_IO_APIC_irq,
1407 .ack = ack_apic_edge,
1408 .eoi = ack_apic_level,
1409 #ifdef CONFIG_SMP
1410 .set_affinity = set_ioapic_affinity_irq,
1411 #endif
1412 .retrigger = ioapic_retrigger_irq,
1415 static inline void init_IO_APIC_traps(void)
1417 int irq;
1420 * NOTE! The local APIC isn't very good at handling
1421 * multiple interrupts at the same interrupt level.
1422 * As the interrupt level is determined by taking the
1423 * vector number and shifting that right by 4, we
1424 * want to spread these out a bit so that they don't
1425 * all fall in the same interrupt level.
1427 * Also, we've got to be careful not to trash gate
1428 * 0x80, because int 0x80 is hm, kind of importantish. ;)
1430 for (irq = 0; irq < NR_IRQS ; irq++) {
1431 int tmp = irq;
1432 if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) {
1434 * Hmm.. We don't have an entry for this,
1435 * so default to an old-fashioned 8259
1436 * interrupt if we can..
1438 if (irq < 16)
1439 make_8259A_irq(irq);
1440 else
1441 /* Strange. Oh, well.. */
1442 irq_desc[irq].chip = &no_irq_chip;
1447 static void enable_lapic_irq (unsigned int irq)
1449 unsigned long v;
1451 v = apic_read(APIC_LVT0);
1452 apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
1455 static void disable_lapic_irq (unsigned int irq)
1457 unsigned long v;
1459 v = apic_read(APIC_LVT0);
1460 apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
1463 static void ack_lapic_irq (unsigned int irq)
1465 ack_APIC_irq();
1468 static void end_lapic_irq (unsigned int i) { /* nothing */ }
1470 static struct hw_interrupt_type lapic_irq_type __read_mostly = {
1471 .typename = "local-APIC-edge",
1472 .startup = NULL, /* startup_irq() not used for IRQ0 */
1473 .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
1474 .enable = enable_lapic_irq,
1475 .disable = disable_lapic_irq,
1476 .ack = ack_lapic_irq,
1477 .end = end_lapic_irq,
1480 static void setup_nmi (void)
1483 * Dirty trick to enable the NMI watchdog ...
1484 * We put the 8259A master into AEOI mode and
1485 * unmask on all local APICs LVT0 as NMI.
1487 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
1488 * is from Maciej W. Rozycki - so we do not have to EOI from
1489 * the NMI handler or the timer interrupt.
1491 printk(KERN_INFO "activating NMI Watchdog ...");
1493 enable_NMI_through_LVT0(NULL);
1495 printk(" done.\n");
1499 * This looks a bit hackish but it's about the only one way of sending
1500 * a few INTA cycles to 8259As and any associated glue logic. ICR does
1501 * not support the ExtINT mode, unfortunately. We need to send these
1502 * cycles as some i82489DX-based boards have glue logic that keeps the
1503 * 8259A interrupt line asserted until INTA. --macro
1505 static inline void unlock_ExtINT_logic(void)
1507 int apic, pin, i;
1508 struct IO_APIC_route_entry entry0, entry1;
1509 unsigned char save_control, save_freq_select;
1510 unsigned long flags;
1512 pin = find_isa_irq_pin(8, mp_INT);
1513 apic = find_isa_irq_apic(8, mp_INT);
1514 if (pin == -1)
1515 return;
1517 spin_lock_irqsave(&ioapic_lock, flags);
1518 *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
1519 *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
1520 spin_unlock_irqrestore(&ioapic_lock, flags);
1521 clear_IO_APIC_pin(apic, pin);
1523 memset(&entry1, 0, sizeof(entry1));
1525 entry1.dest_mode = 0; /* physical delivery */
1526 entry1.mask = 0; /* unmask IRQ now */
1527 entry1.dest.physical.physical_dest = hard_smp_processor_id();
1528 entry1.delivery_mode = dest_ExtINT;
1529 entry1.polarity = entry0.polarity;
1530 entry1.trigger = 0;
1531 entry1.vector = 0;
1533 spin_lock_irqsave(&ioapic_lock, flags);
1534 io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
1535 io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
1536 spin_unlock_irqrestore(&ioapic_lock, flags);
1538 save_control = CMOS_READ(RTC_CONTROL);
1539 save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
1540 CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
1541 RTC_FREQ_SELECT);
1542 CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
1544 i = 100;
1545 while (i-- > 0) {
1546 mdelay(10);
1547 if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
1548 i -= 10;
1551 CMOS_WRITE(save_control, RTC_CONTROL);
1552 CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
1553 clear_IO_APIC_pin(apic, pin);
1555 spin_lock_irqsave(&ioapic_lock, flags);
1556 io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
1557 io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
1558 spin_unlock_irqrestore(&ioapic_lock, flags);
1562 * This code may look a bit paranoid, but it's supposed to cooperate with
1563 * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
1564 * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
1565 * fanatically on his truly buggy board.
1567 * FIXME: really need to revamp this for modern platforms only.
1569 static inline void check_timer(void)
1571 int apic1, pin1, apic2, pin2;
1572 int vector;
1573 cpumask_t mask;
1576 * get/set the timer IRQ vector:
1578 disable_8259A_irq(0);
1579 vector = assign_irq_vector(0, TARGET_CPUS, &mask);
1582 * Subtle, code in do_timer_interrupt() expects an AEOI
1583 * mode for the 8259A whenever interrupts are routed
1584 * through I/O APICs. Also IRQ0 has to be enabled in
1585 * the 8259A which implies the virtual wire has to be
1586 * disabled in the local APIC.
1588 apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
1589 init_8259A(1);
1590 if (timer_over_8254 > 0)
1591 enable_8259A_irq(0);
1593 pin1 = find_isa_irq_pin(0, mp_INT);
1594 apic1 = find_isa_irq_apic(0, mp_INT);
1595 pin2 = ioapic_i8259.pin;
1596 apic2 = ioapic_i8259.apic;
1598 apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
1599 vector, apic1, pin1, apic2, pin2);
1601 if (pin1 != -1) {
1603 * Ok, does IRQ0 through the IOAPIC work?
1605 unmask_IO_APIC_irq(0);
1606 if (!no_timer_check && timer_irq_works()) {
1607 nmi_watchdog_default();
1608 if (nmi_watchdog == NMI_IO_APIC) {
1609 disable_8259A_irq(0);
1610 setup_nmi();
1611 enable_8259A_irq(0);
1613 if (disable_timer_pin_1 > 0)
1614 clear_IO_APIC_pin(0, pin1);
1615 return;
1617 clear_IO_APIC_pin(apic1, pin1);
1618 apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
1619 "connected to IO-APIC\n");
1622 apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
1623 "through the 8259A ... ");
1624 if (pin2 != -1) {
1625 apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
1626 apic2, pin2);
1628 * legacy devices should be connected to IO APIC #0
1630 setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
1631 if (timer_irq_works()) {
1632 apic_printk(APIC_VERBOSE," works.\n");
1633 nmi_watchdog_default();
1634 if (nmi_watchdog == NMI_IO_APIC) {
1635 setup_nmi();
1637 return;
1640 * Cleanup, just in case ...
1642 clear_IO_APIC_pin(apic2, pin2);
1644 apic_printk(APIC_VERBOSE," failed.\n");
1646 if (nmi_watchdog == NMI_IO_APIC) {
1647 printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
1648 nmi_watchdog = 0;
1651 apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
1653 disable_8259A_irq(0);
1654 irq_desc[0].chip = &lapic_irq_type;
1655 apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
1656 enable_8259A_irq(0);
1658 if (timer_irq_works()) {
1659 apic_printk(APIC_VERBOSE," works.\n");
1660 return;
1662 apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
1663 apic_printk(APIC_VERBOSE," failed.\n");
1665 apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
1667 init_8259A(0);
1668 make_8259A_irq(0);
1669 apic_write(APIC_LVT0, APIC_DM_EXTINT);
1671 unlock_ExtINT_logic();
1673 if (timer_irq_works()) {
1674 apic_printk(APIC_VERBOSE," works.\n");
1675 return;
1677 apic_printk(APIC_VERBOSE," failed :(.\n");
1678 panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
1681 static int __init notimercheck(char *s)
1683 no_timer_check = 1;
1684 return 1;
1686 __setup("no_timer_check", notimercheck);
1690 * IRQ's that are handled by the PIC in the MPS IOAPIC case.
1691 * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
1692 * Linux doesn't really care, as it's not actually used
1693 * for any interrupt handling anyway.
1695 #define PIC_IRQS (1<<2)
1697 void __init setup_IO_APIC(void)
1699 enable_IO_APIC();
1701 if (acpi_ioapic)
1702 io_apic_irqs = ~0; /* all IRQs go through IOAPIC */
1703 else
1704 io_apic_irqs = ~PIC_IRQS;
1706 apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
1708 sync_Arb_IDs();
1709 setup_IO_APIC_irqs();
1710 init_IO_APIC_traps();
1711 check_timer();
1712 if (!acpi_ioapic)
1713 print_IO_APIC();
1716 struct sysfs_ioapic_data {
1717 struct sys_device dev;
1718 struct IO_APIC_route_entry entry[0];
1720 static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
1722 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
1724 struct IO_APIC_route_entry *entry;
1725 struct sysfs_ioapic_data *data;
1726 int i;
1728 data = container_of(dev, struct sysfs_ioapic_data, dev);
1729 entry = data->entry;
1730 for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
1731 *entry = ioapic_read_entry(dev->id, i);
1733 return 0;
1736 static int ioapic_resume(struct sys_device *dev)
1738 struct IO_APIC_route_entry *entry;
1739 struct sysfs_ioapic_data *data;
1740 unsigned long flags;
1741 union IO_APIC_reg_00 reg_00;
1742 int i;
1744 data = container_of(dev, struct sysfs_ioapic_data, dev);
1745 entry = data->entry;
1747 spin_lock_irqsave(&ioapic_lock, flags);
1748 reg_00.raw = io_apic_read(dev->id, 0);
1749 if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
1750 reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
1751 io_apic_write(dev->id, 0, reg_00.raw);
1753 spin_unlock_irqrestore(&ioapic_lock, flags);
1754 for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
1755 ioapic_write_entry(dev->id, i, entry[i]);
1757 return 0;
1760 static struct sysdev_class ioapic_sysdev_class = {
1761 set_kset_name("ioapic"),
1762 .suspend = ioapic_suspend,
1763 .resume = ioapic_resume,
1766 static int __init ioapic_init_sysfs(void)
1768 struct sys_device * dev;
1769 int i, size, error = 0;
1771 error = sysdev_class_register(&ioapic_sysdev_class);
1772 if (error)
1773 return error;
1775 for (i = 0; i < nr_ioapics; i++ ) {
1776 size = sizeof(struct sys_device) + nr_ioapic_registers[i]
1777 * sizeof(struct IO_APIC_route_entry);
1778 mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
1779 if (!mp_ioapic_data[i]) {
1780 printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
1781 continue;
1783 memset(mp_ioapic_data[i], 0, size);
1784 dev = &mp_ioapic_data[i]->dev;
1785 dev->id = i;
1786 dev->cls = &ioapic_sysdev_class;
1787 error = sysdev_register(dev);
1788 if (error) {
1789 kfree(mp_ioapic_data[i]);
1790 mp_ioapic_data[i] = NULL;
1791 printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
1792 continue;
1796 return 0;
1799 device_initcall(ioapic_init_sysfs);
1802 * Dynamic irq allocate and deallocation
1804 int create_irq(void)
1806 /* Allocate an unused irq */
1807 int irq;
1808 int new;
1809 int vector = 0;
1810 unsigned long flags;
1811 cpumask_t mask;
1813 irq = -ENOSPC;
1814 spin_lock_irqsave(&vector_lock, flags);
1815 for (new = (NR_IRQS - 1); new >= 0; new--) {
1816 if (platform_legacy_irq(new))
1817 continue;
1818 if (irq_vector[new] != 0)
1819 continue;
1820 vector = __assign_irq_vector(new, TARGET_CPUS, &mask);
1821 if (likely(vector > 0))
1822 irq = new;
1823 break;
1825 spin_unlock_irqrestore(&vector_lock, flags);
1827 if (irq >= 0) {
1828 dynamic_irq_init(irq);
1830 return irq;
1833 void destroy_irq(unsigned int irq)
1835 unsigned long flags;
1837 dynamic_irq_cleanup(irq);
1839 spin_lock_irqsave(&vector_lock, flags);
1840 irq_vector[irq] = 0;
1841 spin_unlock_irqrestore(&vector_lock, flags);
1845 * MSI mesage composition
1847 #ifdef CONFIG_PCI_MSI
1848 static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
1850 int vector;
1851 unsigned dest;
1852 cpumask_t tmp;
1854 vector = assign_irq_vector(irq, TARGET_CPUS, &tmp);
1855 if (vector >= 0) {
1856 dest = cpu_mask_to_apicid(tmp);
1858 msg->address_hi = MSI_ADDR_BASE_HI;
1859 msg->address_lo =
1860 MSI_ADDR_BASE_LO |
1861 ((INT_DEST_MODE == 0) ?
1862 MSI_ADDR_DEST_MODE_PHYSICAL:
1863 MSI_ADDR_DEST_MODE_LOGICAL) |
1864 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
1865 MSI_ADDR_REDIRECTION_CPU:
1866 MSI_ADDR_REDIRECTION_LOWPRI) |
1867 MSI_ADDR_DEST_ID(dest);
1869 msg->data =
1870 MSI_DATA_TRIGGER_EDGE |
1871 MSI_DATA_LEVEL_ASSERT |
1872 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
1873 MSI_DATA_DELIVERY_FIXED:
1874 MSI_DATA_DELIVERY_LOWPRI) |
1875 MSI_DATA_VECTOR(vector);
1877 return vector;
1880 #ifdef CONFIG_SMP
1881 static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
1883 struct msi_msg msg;
1884 unsigned int dest;
1885 cpumask_t tmp;
1886 int vector;
1888 cpus_and(tmp, mask, cpu_online_map);
1889 if (cpus_empty(tmp))
1890 tmp = TARGET_CPUS;
1892 cpus_and(mask, tmp, CPU_MASK_ALL);
1894 vector = assign_irq_vector(irq, mask, &tmp);
1895 if (vector < 0)
1896 return;
1898 dest = cpu_mask_to_apicid(tmp);
1900 read_msi_msg(irq, &msg);
1902 msg.data &= ~MSI_DATA_VECTOR_MASK;
1903 msg.data |= MSI_DATA_VECTOR(vector);
1904 msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
1905 msg.address_lo |= MSI_ADDR_DEST_ID(dest);
1907 write_msi_msg(irq, &msg);
1908 set_native_irq_info(irq, mask);
1910 #endif /* CONFIG_SMP */
1913 * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
1914 * which implement the MSI or MSI-X Capability Structure.
1916 static struct irq_chip msi_chip = {
1917 .name = "PCI-MSI",
1918 .unmask = unmask_msi_irq,
1919 .mask = mask_msi_irq,
1920 .ack = ack_apic_edge,
1921 #ifdef CONFIG_SMP
1922 .set_affinity = set_msi_irq_affinity,
1923 #endif
1924 .retrigger = ioapic_retrigger_irq,
1927 int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev)
1929 struct msi_msg msg;
1930 int ret;
1931 ret = msi_compose_msg(dev, irq, &msg);
1932 if (ret < 0)
1933 return ret;
1935 write_msi_msg(irq, &msg);
1937 set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
1939 return 0;
1942 void arch_teardown_msi_irq(unsigned int irq)
1944 return;
1947 #endif /* CONFIG_PCI_MSI */
1950 * Hypertransport interrupt support
1952 #ifdef CONFIG_HT_IRQ
1954 #ifdef CONFIG_SMP
1956 static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
1958 struct ht_irq_msg msg;
1959 fetch_ht_irq_msg(irq, &msg);
1961 msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
1962 msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
1964 msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
1965 msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
1967 write_ht_irq_msg(irq, &msg);
1970 static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
1972 unsigned int dest;
1973 cpumask_t tmp;
1974 int vector;
1976 cpus_and(tmp, mask, cpu_online_map);
1977 if (cpus_empty(tmp))
1978 tmp = TARGET_CPUS;
1980 cpus_and(mask, tmp, CPU_MASK_ALL);
1982 vector = assign_irq_vector(irq, mask, &tmp);
1983 if (vector < 0)
1984 return;
1986 dest = cpu_mask_to_apicid(tmp);
1988 target_ht_irq(irq, dest, vector);
1989 set_native_irq_info(irq, mask);
1991 #endif
1993 static struct irq_chip ht_irq_chip = {
1994 .name = "PCI-HT",
1995 .mask = mask_ht_irq,
1996 .unmask = unmask_ht_irq,
1997 .ack = ack_apic_edge,
1998 #ifdef CONFIG_SMP
1999 .set_affinity = set_ht_irq_affinity,
2000 #endif
2001 .retrigger = ioapic_retrigger_irq,
2004 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
2006 int vector;
2007 cpumask_t tmp;
2009 vector = assign_irq_vector(irq, TARGET_CPUS, &tmp);
2010 if (vector >= 0) {
2011 struct ht_irq_msg msg;
2012 unsigned dest;
2014 dest = cpu_mask_to_apicid(tmp);
2016 msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
2018 msg.address_lo =
2019 HT_IRQ_LOW_BASE |
2020 HT_IRQ_LOW_DEST_ID(dest) |
2021 HT_IRQ_LOW_VECTOR(vector) |
2022 ((INT_DEST_MODE == 0) ?
2023 HT_IRQ_LOW_DM_PHYSICAL :
2024 HT_IRQ_LOW_DM_LOGICAL) |
2025 HT_IRQ_LOW_RQEOI_EDGE |
2026 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
2027 HT_IRQ_LOW_MT_FIXED :
2028 HT_IRQ_LOW_MT_ARBITRATED) |
2029 HT_IRQ_LOW_IRQ_MASKED;
2031 write_ht_irq_msg(irq, &msg);
2033 set_irq_chip_and_handler_name(irq, &ht_irq_chip,
2034 handle_edge_irq, "edge");
2036 return vector;
2038 #endif /* CONFIG_HT_IRQ */
2040 /* --------------------------------------------------------------------------
2041 ACPI-based IOAPIC Configuration
2042 -------------------------------------------------------------------------- */
2044 #ifdef CONFIG_ACPI
2046 #define IO_APIC_MAX_ID 0xFE
2048 int __init io_apic_get_redir_entries (int ioapic)
2050 union IO_APIC_reg_01 reg_01;
2051 unsigned long flags;
2053 spin_lock_irqsave(&ioapic_lock, flags);
2054 reg_01.raw = io_apic_read(ioapic, 1);
2055 spin_unlock_irqrestore(&ioapic_lock, flags);
2057 return reg_01.bits.entries;
2061 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
2063 struct IO_APIC_route_entry entry;
2064 unsigned long flags;
2065 int vector;
2066 cpumask_t mask;
2068 if (!IO_APIC_IRQ(irq)) {
2069 apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
2070 ioapic);
2071 return -EINVAL;
2075 * IRQs < 16 are already in the irq_2_pin[] map
2077 if (irq >= 16)
2078 add_pin_to_irq(irq, ioapic, pin);
2081 vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
2082 if (vector < 0)
2083 return vector;
2086 * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
2087 * Note that we mask (disable) IRQs now -- these get enabled when the
2088 * corresponding device driver registers for this IRQ.
2091 memset(&entry,0,sizeof(entry));
2093 entry.delivery_mode = INT_DELIVERY_MODE;
2094 entry.dest_mode = INT_DEST_MODE;
2095 entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask);
2096 entry.trigger = triggering;
2097 entry.polarity = polarity;
2098 entry.mask = 1; /* Disabled (masked) */
2099 entry.vector = vector & 0xff;
2101 apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
2102 "IRQ %d Mode:%i Active:%i)\n", ioapic,
2103 mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
2104 triggering, polarity);
2106 ioapic_register_intr(irq, entry.vector, triggering);
2108 if (!ioapic && (irq < 16))
2109 disable_8259A_irq(irq);
2111 ioapic_write_entry(ioapic, pin, entry);
2113 spin_lock_irqsave(&ioapic_lock, flags);
2114 set_native_irq_info(irq, TARGET_CPUS);
2115 spin_unlock_irqrestore(&ioapic_lock, flags);
2117 return 0;
2120 #endif /* CONFIG_ACPI */
2124 * This function currently is only a helper for the i386 smp boot process where
2125 * we need to reprogram the ioredtbls to cater for the cpus which have come online
2126 * so mask in all cases should simply be TARGET_CPUS
2128 #ifdef CONFIG_SMP
2129 void __init setup_ioapic_dest(void)
2131 int pin, ioapic, irq, irq_entry;
2133 if (skip_ioapic_setup == 1)
2134 return;
2136 for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
2137 for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
2138 irq_entry = find_irq_entry(ioapic, pin, mp_INT);
2139 if (irq_entry == -1)
2140 continue;
2141 irq = pin_2_irq(irq_entry, ioapic, pin);
2142 set_ioapic_affinity_irq(irq, TARGET_CPUS);
2147 #endif