[ARM] pxa/spitz: add gpio button support (fixes regression)

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mm / mmu.c

/*
 *  linux/arch/arm/mm/mmu.c
 *
 *  Copyright (C) 1995-2005 Russell King
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/mman.h>
#include <linux/nodemask.h>

#include <asm/cputype.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
#include <asm/cachetype.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/smp_plat.h>
#include <asm/tlb.h>
#include <asm/highmem.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include "mm.h"

DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);

/*
 * empty_zero_page is a special page that is used for
 * zero-initialized data and COW.
 */
struct page *empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);

/*
 * The pmd table for the upper-most set of pages.
 */
pmd_t *top_pmd;

#define CPOLICY_UNCACHED        0
#define CPOLICY_BUFFERED        1
#define CPOLICY_WRITETHROUGH    2
#define CPOLICY_WRITEBACK       3
#define CPOLICY_WRITEALLOC      4

static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
static unsigned int ecc_mask __initdata = 0;
pgprot_t pgprot_user;
pgprot_t pgprot_kernel;

EXPORT_SYMBOL(pgprot_user);
EXPORT_SYMBOL(pgprot_kernel);

struct cachepolicy {
        const char      policy[16];
        unsigned int    cr_mask;
        unsigned int    pmd;
        unsigned int    pte;
};

static struct cachepolicy cache_policies[] __initdata = {
        {
                .policy         = "uncached",
                .cr_mask        = CR_W|CR_C,
                .pmd            = PMD_SECT_UNCACHED,
                .pte            = L_PTE_MT_UNCACHED,
        }, {
                .policy         = "buffered",
                .cr_mask        = CR_C,
                .pmd            = PMD_SECT_BUFFERED,
                .pte            = L_PTE_MT_BUFFERABLE,
        }, {
                .policy         = "writethrough",
                .cr_mask        = 0,
                .pmd            = PMD_SECT_WT,
                .pte            = L_PTE_MT_WRITETHROUGH,
        }, {
                .policy         = "writeback",
                .cr_mask        = 0,
                .pmd            = PMD_SECT_WB,
                .pte            = L_PTE_MT_WRITEBACK,
        }, {
                .policy         = "writealloc",
                .cr_mask        = 0,
                .pmd            = PMD_SECT_WBWA,
                .pte            = L_PTE_MT_WRITEALLOC,
        }
};

/*
 * These are useful for identifying cache coherency
 * problems by allowing the cache or the cache and
 * writebuffer to be turned off.  (Note: the write
 * buffer should not be on and the cache off).
 */
static void __init early_cachepolicy(char **p)
{
        int i;

        for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
                int len = strlen(cache_policies[i].policy);

                if (memcmp(*p, cache_policies[i].policy, len) == 0) {
                        cachepolicy = i;
                        cr_alignment &= ~cache_policies[i].cr_mask;
                        cr_no_alignment &= ~cache_policies[i].cr_mask;
                        *p += len;
                        break;
                }
        }
        if (i == ARRAY_SIZE(cache_policies))
                printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
        if (cpu_architecture() >= CPU_ARCH_ARMv6) {
                printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
                cachepolicy = CPOLICY_WRITEBACK;
        }
        flush_cache_all();
        set_cr(cr_alignment);
}
__early_param("cachepolicy=", early_cachepolicy);

static void __init early_nocache(char **__unused)
{
        char *p = "buffered";
        printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
        early_cachepolicy(&p);
}
__early_param("nocache", early_nocache);

static void __init early_nowrite(char **__unused)
{
        char *p = "uncached";
        printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
        early_cachepolicy(&p);
}
__early_param("nowb", early_nowrite);

static void __init early_ecc(char **p)
{
        if (memcmp(*p, "on", 2) == 0) {
                ecc_mask = PMD_PROTECTION;
                *p += 2;
        } else if (memcmp(*p, "off", 3) == 0) {
                ecc_mask = 0;
                *p += 3;
        }
}
__early_param("ecc=", early_ecc);

static int __init noalign_setup(char *__unused)
{
        cr_alignment &= ~CR_A;
        cr_no_alignment &= ~CR_A;
        set_cr(cr_alignment);
        return 1;
}
__setup("noalign", noalign_setup);

#ifndef CONFIG_SMP
void adjust_cr(unsigned long mask, unsigned long set)
{
        unsigned long flags;

        mask &= ~CR_A;

        set &= mask;

        local_irq_save(flags);

        cr_no_alignment = (cr_no_alignment & ~mask) | set;
        cr_alignment = (cr_alignment & ~mask) | set;

        set_cr((get_cr() & ~mask) | set);

        local_irq_restore(flags);
}
#endif

#define PROT_PTE_DEVICE         L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_WRITE
#define PROT_SECT_DEVICE        PMD_TYPE_SECT|PMD_SECT_AP_WRITE

static struct mem_type mem_types[] = {
        [MT_DEVICE] = {           /* Strongly ordered / ARMv6 shared device */
                .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
                                  L_PTE_SHARED,
                .prot_l1        = PMD_TYPE_TABLE,
                .prot_sect      = PROT_SECT_DEVICE | PMD_SECT_S,
                .domain         = DOMAIN_IO,
        },
        [MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
                .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
                .prot_l1        = PMD_TYPE_TABLE,
                .prot_sect      = PROT_SECT_DEVICE,
                .domain         = DOMAIN_IO,
        },
        [MT_DEVICE_CACHED] = {    /* ioremap_cached */
                .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED,
                .prot_l1        = PMD_TYPE_TABLE,
                .prot_sect      = PROT_SECT_DEVICE | PMD_SECT_WB,
                .domain         = DOMAIN_IO,
        },      
        [MT_DEVICE_WC] = {      /* ioremap_wc */
                .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
                .prot_l1        = PMD_TYPE_TABLE,
                .prot_sect      = PROT_SECT_DEVICE,
                .domain         = DOMAIN_IO,
        },
        [MT_UNCACHED] = {
                .prot_pte       = PROT_PTE_DEVICE,
                .prot_l1        = PMD_TYPE_TABLE,
                .prot_sect      = PMD_TYPE_SECT | PMD_SECT_XN,
                .domain         = DOMAIN_IO,
        },
        [MT_CACHECLEAN] = {
                .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
                .domain    = DOMAIN_KERNEL,
        },
        [MT_MINICLEAN] = {
                .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
                .domain    = DOMAIN_KERNEL,
        },
        [MT_LOW_VECTORS] = {
                .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
                                L_PTE_EXEC,
                .prot_l1   = PMD_TYPE_TABLE,
                .domain    = DOMAIN_USER,
        },
        [MT_HIGH_VECTORS] = {
                .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
                                L_PTE_USER | L_PTE_EXEC,
                .prot_l1   = PMD_TYPE_TABLE,
                .domain    = DOMAIN_USER,
        },
        [MT_MEMORY] = {
                .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
                .domain    = DOMAIN_KERNEL,
        },
        [MT_ROM] = {
                .prot_sect = PMD_TYPE_SECT,
                .domain    = DOMAIN_KERNEL,
        },
        [MT_MEMORY_NONCACHED] = {
                .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
                .domain    = DOMAIN_KERNEL,
        },
};

const struct mem_type *get_mem_type(unsigned int type)
{
        return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
}
EXPORT_SYMBOL(get_mem_type);

/*
 * Adjust the PMD section entries according to the CPU in use.
 */
static void __init build_mem_type_table(void)
{
        struct cachepolicy *cp;
        unsigned int cr = get_cr();
        unsigned int user_pgprot, kern_pgprot, vecs_pgprot;
        int cpu_arch = cpu_architecture();
        int i;

        if (cpu_arch < CPU_ARCH_ARMv6) {
#if defined(CONFIG_CPU_DCACHE_DISABLE)
                if (cachepolicy > CPOLICY_BUFFERED)
                        cachepolicy = CPOLICY_BUFFERED;
#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
                if (cachepolicy > CPOLICY_WRITETHROUGH)
                        cachepolicy = CPOLICY_WRITETHROUGH;
#endif
        }
        if (cpu_arch < CPU_ARCH_ARMv5) {
                if (cachepolicy >= CPOLICY_WRITEALLOC)
                        cachepolicy = CPOLICY_WRITEBACK;
                ecc_mask = 0;
        }
#ifdef CONFIG_SMP
        cachepolicy = CPOLICY_WRITEALLOC;
#endif

        /*
         * Strip out features not present on earlier architectures.
         * Pre-ARMv5 CPUs don't have TEX bits.  Pre-ARMv6 CPUs or those
         * without extended page tables don't have the 'Shared' bit.
         */
        if (cpu_arch < CPU_ARCH_ARMv5)
                for (i = 0; i < ARRAY_SIZE(mem_types); i++)
                        mem_types[i].prot_sect &= ~PMD_SECT_TEX(7);
        if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3())
                for (i = 0; i < ARRAY_SIZE(mem_types); i++)
                        mem_types[i].prot_sect &= ~PMD_SECT_S;

        /*
         * ARMv5 and lower, bit 4 must be set for page tables (was: cache
         * "update-able on write" bit on ARM610).  However, Xscale and
         * Xscale3 require this bit to be cleared.
         */
        if (cpu_is_xscale() || cpu_is_xsc3()) {
                for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
                        mem_types[i].prot_sect &= ~PMD_BIT4;
                        mem_types[i].prot_l1 &= ~PMD_BIT4;
                }
        } else if (cpu_arch < CPU_ARCH_ARMv6) {
                for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
                        if (mem_types[i].prot_l1)
                                mem_types[i].prot_l1 |= PMD_BIT4;
                        if (mem_types[i].prot_sect)
                                mem_types[i].prot_sect |= PMD_BIT4;
                }
        }

        /*
         * Mark the device areas according to the CPU/architecture.
         */
        if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) {
                if (!cpu_is_xsc3()) {
                        /*
                         * Mark device regions on ARMv6+ as execute-never
                         * to prevent speculative instruction fetches.
                         */
                        mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN;
                        mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
                        mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
                        mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
                }
                if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
                        /*
                         * For ARMv7 with TEX remapping,
                         * - shared device is SXCB=1100
                         * - nonshared device is SXCB=0100
                         * - write combine device mem is SXCB=0001
                         * (Uncached Normal memory)
                         */
                        mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1);
                        mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1);
                        mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
                } else if (cpu_is_xsc3()) {
                        /*
                         * For Xscale3,
                         * - shared device is TEXCB=00101
                         * - nonshared device is TEXCB=01000
                         * - write combine device mem is TEXCB=00100
                         * (Inner/Outer Uncacheable in xsc3 parlance)
                         */
                        mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED;
                        mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
                        mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
                } else {
                        /*
                         * For ARMv6 and ARMv7 without TEX remapping,
                         * - shared device is TEXCB=00001
                         * - nonshared device is TEXCB=01000
                         * - write combine device mem is TEXCB=00100
                         * (Uncached Normal in ARMv6 parlance).
                         */
                        mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
                        mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
                        mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
                }
        } else {
                /*
                 * On others, write combining is "Uncached/Buffered"
                 */
                mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
        }

        /*
         * Now deal with the memory-type mappings
         */
        cp = &cache_policies[cachepolicy];
        vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;

#ifndef CONFIG_SMP
        /*
         * Only use write-through for non-SMP systems
         */
        if (cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
                vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
#endif

        /*
         * Enable CPU-specific coherency if supported.
         * (Only available on XSC3 at the moment.)
         */
        if (arch_is_coherent() && cpu_is_xsc3())
                mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;

        /*
         * ARMv6 and above have extended page tables.
         */
        if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
                /*
                 * Mark cache clean areas and XIP ROM read only
                 * from SVC mode and no access from userspace.
                 */
                mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
                mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
                mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;

#ifdef CONFIG_SMP
                /*
                 * Mark memory with the "shared" attribute for SMP systems
                 */
                user_pgprot |= L_PTE_SHARED;
                kern_pgprot |= L_PTE_SHARED;
                vecs_pgprot |= L_PTE_SHARED;
                mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
                mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
        }

        /*
         * Non-cacheable Normal - intended for memory areas that must
         * not cause dirty cache line writebacks when used
         */
        if (cpu_arch >= CPU_ARCH_ARMv6) {
                if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
                        /* Non-cacheable Normal is XCB = 001 */
                        mem_types[MT_MEMORY_NONCACHED].prot_sect |=
                                PMD_SECT_BUFFERED;
                } else {
                        /* For both ARMv6 and non-TEX-remapping ARMv7 */
                        mem_types[MT_MEMORY_NONCACHED].prot_sect |=
                                PMD_SECT_TEX(1);
                }
        } else {
                mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
        }

        for (i = 0; i < 16; i++) {
                unsigned long v = pgprot_val(protection_map[i]);
                protection_map[i] = __pgprot(v | user_pgprot);
        }

        mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
        mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;

        pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
        pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
                                 L_PTE_DIRTY | L_PTE_WRITE |
                                 L_PTE_EXEC | kern_pgprot);

        mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
        mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
        mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
        mem_types[MT_ROM].prot_sect |= cp->pmd;

        switch (cp->pmd) {
        case PMD_SECT_WT:
                mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
                break;
        case PMD_SECT_WB:
        case PMD_SECT_WBWA:
                mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
                break;
        }
        printk("Memory policy: ECC %sabled, Data cache %s\n",
                ecc_mask ? "en" : "dis", cp->policy);

        for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
                struct mem_type *t = &mem_types[i];
                if (t->prot_l1)
                        t->prot_l1 |= PMD_DOMAIN(t->domain);
                if (t->prot_sect)
                        t->prot_sect |= PMD_DOMAIN(t->domain);
        }
}

#define vectors_base()  (vectors_high() ? 0xffff0000 : 0)

static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
                                  unsigned long end, unsigned long pfn,
                                  const struct mem_type *type)
{
        pte_t *pte;

        if (pmd_none(*pmd)) {
                pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
                __pmd_populate(pmd, __pa(pte) | type->prot_l1);
        }

        pte = pte_offset_kernel(pmd, addr);
        do {
                set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
                pfn++;
        } while (pte++, addr += PAGE_SIZE, addr != end);
}

static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
                                      unsigned long end, unsigned long phys,
                                      const struct mem_type *type)
{
        pmd_t *pmd = pmd_offset(pgd, addr);

        /*
         * Try a section mapping - end, addr and phys must all be aligned
         * to a section boundary.  Note that PMDs refer to the individual
         * L1 entries, whereas PGDs refer to a group of L1 entries making
         * up one logical pointer to an L2 table.
         */
        if (((addr | end | phys) & ~SECTION_MASK) == 0) {
                pmd_t *p = pmd;

                if (addr & SECTION_SIZE)
                        pmd++;

                do {
                        *pmd = __pmd(phys | type->prot_sect);
                        phys += SECTION_SIZE;
                } while (pmd++, addr += SECTION_SIZE, addr != end);

                flush_pmd_entry(p);
        } else {
                /*
                 * No need to loop; pte's aren't interested in the
                 * individual L1 entries.
                 */
                alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
        }
}

static void __init create_36bit_mapping(struct map_desc *md,
                                        const struct mem_type *type)
{
        unsigned long phys, addr, length, end;
        pgd_t *pgd;

        addr = md->virtual;
        phys = (unsigned long)__pfn_to_phys(md->pfn);
        length = PAGE_ALIGN(md->length);

        if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) {
                printk(KERN_ERR "MM: CPU does not support supersection "
                       "mapping for 0x%08llx at 0x%08lx\n",
                       __pfn_to_phys((u64)md->pfn), addr);
                return;
        }

        /* N.B. ARMv6 supersections are only defined to work with domain 0.
         *      Since domain assignments can in fact be arbitrary, the
         *      'domain == 0' check below is required to insure that ARMv6
         *      supersections are only allocated for domain 0 regardless
         *      of the actual domain assignments in use.
         */
        if (type->domain) {
                printk(KERN_ERR "MM: invalid domain in supersection "
                       "mapping for 0x%08llx at 0x%08lx\n",
                       __pfn_to_phys((u64)md->pfn), addr);
                return;
        }

        if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) {
                printk(KERN_ERR "MM: cannot create mapping for "
                       "0x%08llx at 0x%08lx invalid alignment\n",
                       __pfn_to_phys((u64)md->pfn), addr);
                return;
        }

        /*
         * Shift bits [35:32] of address into bits [23:20] of PMD
         * (See ARMv6 spec).
         */
        phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);

        pgd = pgd_offset_k(addr);
        end = addr + length;
        do {
                pmd_t *pmd = pmd_offset(pgd, addr);
                int i;

                for (i = 0; i < 16; i++)
                        *pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER);

                addr += SUPERSECTION_SIZE;
                phys += SUPERSECTION_SIZE;
                pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
        } while (addr != end);
}

/*
 * Create the page directory entries and any necessary
 * page tables for the mapping specified by `md'.  We
 * are able to cope here with varying sizes and address
 * offsets, and we take full advantage of sections and
 * supersections.
 */
void __init create_mapping(struct map_desc *md)
{
        unsigned long phys, addr, length, end;
        const struct mem_type *type;
        pgd_t *pgd;

        if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
                printk(KERN_WARNING "BUG: not creating mapping for "
                       "0x%08llx at 0x%08lx in user region\n",
                       __pfn_to_phys((u64)md->pfn), md->virtual);
                return;
        }

        if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
            md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
                printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
                       "overlaps vmalloc space\n",
                       __pfn_to_phys((u64)md->pfn), md->virtual);
        }

        type = &mem_types[md->type];

        /*
         * Catch 36-bit addresses
         */
        if (md->pfn >= 0x100000) {
                create_36bit_mapping(md, type);
                return;
        }

        addr = md->virtual & PAGE_MASK;
        phys = (unsigned long)__pfn_to_phys(md->pfn);
        length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));

        if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
                printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
                       "be mapped using pages, ignoring.\n",
                       __pfn_to_phys(md->pfn), addr);
                return;
        }

        pgd = pgd_offset_k(addr);
        end = addr + length;
        do {
                unsigned long next = pgd_addr_end(addr, end);

                alloc_init_section(pgd, addr, next, phys, type);

                phys += next - addr;
                addr = next;
        } while (pgd++, addr != end);
}

/*
 * Create the architecture specific mappings
 */
void __init iotable_init(struct map_desc *io_desc, int nr)
{
        int i;

        for (i = 0; i < nr; i++)
                create_mapping(io_desc + i);
}

static unsigned long __initdata vmalloc_reserve = SZ_128M;

/*
 * vmalloc=size forces the vmalloc area to be exactly 'size'
 * bytes. This can be used to increase (or decrease) the vmalloc
 * area - the default is 128m.
 */
static void __init early_vmalloc(char **arg)
{
        vmalloc_reserve = memparse(*arg, arg);

        if (vmalloc_reserve < SZ_16M) {
                vmalloc_reserve = SZ_16M;
                printk(KERN_WARNING
                        "vmalloc area too small, limiting to %luMB\n",
                        vmalloc_reserve >> 20);
        }

        if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
                vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
                printk(KERN_WARNING
                        "vmalloc area is too big, limiting to %luMB\n",
                        vmalloc_reserve >> 20);
        }
}
__early_param("vmalloc=", early_vmalloc);

#define VMALLOC_MIN     (void *)(VMALLOC_END - vmalloc_reserve)

static void __init sanity_check_meminfo(void)
{
        int i, j, highmem = 0;

        for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
                struct membank *bank = &meminfo.bank[j];
                *bank = meminfo.bank[i];

#ifdef CONFIG_HIGHMEM
                if (__va(bank->start) > VMALLOC_MIN ||
                    __va(bank->start) < (void *)PAGE_OFFSET)
                        highmem = 1;

                bank->highmem = highmem;

                /*
                 * Split those memory banks which are partially overlapping
                 * the vmalloc area greatly simplifying things later.
                 */
                if (__va(bank->start) < VMALLOC_MIN &&
                    bank->size > VMALLOC_MIN - __va(bank->start)) {
                        if (meminfo.nr_banks >= NR_BANKS) {
                                printk(KERN_CRIT "NR_BANKS too low, "
                                                 "ignoring high memory\n");
                        } else {
                                memmove(bank + 1, bank,
                                        (meminfo.nr_banks - i) * sizeof(*bank));
                                meminfo.nr_banks++;
                                i++;
                                bank[1].size -= VMALLOC_MIN - __va(bank->start);
                                bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
                                bank[1].highmem = highmem = 1;
                                j++;
                        }
                        bank->size = VMALLOC_MIN - __va(bank->start);
                }
#else
                bank->highmem = highmem;

                /*
                 * Check whether this memory bank would entirely overlap
                 * the vmalloc area.
                 */
                if (__va(bank->start) >= VMALLOC_MIN ||
                    __va(bank->start) < (void *)PAGE_OFFSET) {
                        printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
                               "(vmalloc region overlap).\n",
                               bank->start, bank->start + bank->size - 1);
                        continue;
                }

                /*
                 * Check whether this memory bank would partially overlap
                 * the vmalloc area.
                 */
                if (__va(bank->start + bank->size) > VMALLOC_MIN ||
                    __va(bank->start + bank->size) < __va(bank->start)) {
                        unsigned long newsize = VMALLOC_MIN - __va(bank->start);
                        printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
                               "to -%.8lx (vmalloc region overlap).\n",
                               bank->start, bank->start + bank->size - 1,
                               bank->start + newsize - 1);
                        bank->size = newsize;
                }
#endif
                j++;
        }
#ifdef CONFIG_HIGHMEM
        if (highmem) {
                const char *reason = NULL;

                if (cache_is_vipt_aliasing()) {
                        /*
                         * Interactions between kmap and other mappings
                         * make highmem support with aliasing VIPT caches
                         * rather difficult.
                         */
                        reason = "with VIPT aliasing cache";
#ifdef CONFIG_SMP
                } else if (tlb_ops_need_broadcast()) {
                        /*
                         * kmap_high needs to occasionally flush TLB entries,
                         * however, if the TLB entries need to be broadcast
                         * we may deadlock:
                         *  kmap_high(irqs off)->flush_all_zero_pkmaps->
                         *  flush_tlb_kernel_range->smp_call_function_many
                         *   (must not be called with irqs off)
                         */
                        reason = "without hardware TLB ops broadcasting";
#endif
                }
                if (reason) {
                        printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
                                reason);
                        while (j > 0 && meminfo.bank[j - 1].highmem)
                                j--;
                }
        }
#endif
        meminfo.nr_banks = j;
}

static inline void prepare_page_table(void)
{
        unsigned long addr;

        /*
         * Clear out all the mappings below the kernel image.
         */
        for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
                pmd_clear(pmd_off_k(addr));

#ifdef CONFIG_XIP_KERNEL
        /* The XIP kernel is mapped in the module area -- skip over it */
        addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
#endif
        for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
                pmd_clear(pmd_off_k(addr));

        /*
         * Clear out all the kernel space mappings, except for the first
         * memory bank, up to the end of the vmalloc region.
         */
        for (addr = __phys_to_virt(bank_phys_end(&meminfo.bank[0]));
             addr < VMALLOC_END; addr += PGDIR_SIZE)
                pmd_clear(pmd_off_k(addr));
}

/*
 * Reserve the various regions of node 0
 */
void __init reserve_node_zero(pg_data_t *pgdat)
{
        unsigned long res_size = 0;

        /*
         * Register the kernel text and data with bootmem.
         * Note that this can only be in node 0.
         */
#ifdef CONFIG_XIP_KERNEL
        reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
                        BOOTMEM_DEFAULT);
#else
        reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
                        BOOTMEM_DEFAULT);
#endif

        /*
         * Reserve the page tables.  These are already in use,
         * and can only be in node 0.
         */
        reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
                             PTRS_PER_PGD * sizeof(pgd_t), BOOTMEM_DEFAULT);

        /*
         * Hmm... This should go elsewhere, but we really really need to
         * stop things allocating the low memory; ideally we need a better
         * implementation of GFP_DMA which does not assume that DMA-able
         * memory starts at zero.
         */
        if (machine_is_integrator() || machine_is_cintegrator())
                res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;

        /*
         * These should likewise go elsewhere.  They pre-reserve the
         * screen memory region at the start of main system memory.
         */
        if (machine_is_edb7211())
                res_size = 0x00020000;
        if (machine_is_p720t())
                res_size = 0x00014000;

        /* H1940 and RX3715 need to reserve this for suspend */

        if (machine_is_h1940() || machine_is_rx3715()) {
                reserve_bootmem_node(pgdat, 0x30003000, 0x1000,
                                BOOTMEM_DEFAULT);
                reserve_bootmem_node(pgdat, 0x30081000, 0x1000,
                                BOOTMEM_DEFAULT);
        }

        if (machine_is_palmld() || machine_is_palmtx()) {
                reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
                                BOOTMEM_EXCLUSIVE);
                reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
                                BOOTMEM_EXCLUSIVE);
        }

        if (machine_is_treo680()) {
                reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
                                BOOTMEM_EXCLUSIVE);
                reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
                                BOOTMEM_EXCLUSIVE);
        }

        if (machine_is_palmt5())
                reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
                                BOOTMEM_EXCLUSIVE);

        /*
         * U300 - This platform family can share physical memory
         * between two ARM cpus, one running Linux and the other
         * running another OS.
         */
        if (machine_is_u300()) {
#ifdef CONFIG_MACH_U300_SINGLE_RAM
#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) &&    \
        CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
                res_size = 0x00100000;
#endif
#endif
        }

#ifdef CONFIG_SA1111
        /*
         * Because of the SA1111 DMA bug, we want to preserve our
         * precious DMA-able memory...
         */
        res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
#endif
        if (res_size)
                reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size,
                                BOOTMEM_DEFAULT);
}

/*
 * Set up device the mappings.  Since we clear out the page tables for all
 * mappings above VMALLOC_END, we will remove any debug device mappings.
 * This means you have to be careful how you debug this function, or any
 * called function.  This means you can't use any function or debugging
 * method which may touch any device, otherwise the kernel _will_ crash.
 */
static void __init devicemaps_init(struct machine_desc *mdesc)
{
        struct map_desc map;
        unsigned long addr;
        void *vectors;

        /*
         * Allocate the vector page early.
         */
        vectors = alloc_bootmem_low_pages(PAGE_SIZE);

        for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
                pmd_clear(pmd_off_k(addr));

        /*
         * Map the kernel if it is XIP.
         * It is always first in the modulearea.
         */
#ifdef CONFIG_XIP_KERNEL
        map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
        map.virtual = MODULES_VADDR;
        map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
        map.type = MT_ROM;
        create_mapping(&map);
#endif

        /*
         * Map the cache flushing regions.
         */
#ifdef FLUSH_BASE
        map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
        map.virtual = FLUSH_BASE;
        map.length = SZ_1M;
        map.type = MT_CACHECLEAN;
        create_mapping(&map);
#endif
#ifdef FLUSH_BASE_MINICACHE
        map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
        map.virtual = FLUSH_BASE_MINICACHE;
        map.length = SZ_1M;
        map.type = MT_MINICLEAN;
        create_mapping(&map);
#endif

        /*
         * Create a mapping for the machine vectors at the high-vectors
         * location (0xffff0000).  If we aren't using high-vectors, also
         * create a mapping at the low-vectors virtual address.
         */
        map.pfn = __phys_to_pfn(virt_to_phys(vectors));
        map.virtual = 0xffff0000;
        map.length = PAGE_SIZE;
        map.type = MT_HIGH_VECTORS;
        create_mapping(&map);

        if (!vectors_high()) {
                map.virtual = 0;
                map.type = MT_LOW_VECTORS;
                create_mapping(&map);
        }

        /*
         * Ask the machine support to map in the statically mapped devices.
         */
        if (mdesc->map_io)
                mdesc->map_io();

        /*
         * Finally flush the caches and tlb to ensure that we're in a
         * consistent state wrt the writebuffer.  This also ensures that
         * any write-allocated cache lines in the vector page are written
         * back.  After this point, we can start to touch devices again.
         */
        local_flush_tlb_all();
        flush_cache_all();
}

static void __init kmap_init(void)
{
#ifdef CONFIG_HIGHMEM
        pmd_t *pmd = pmd_off_k(PKMAP_BASE);
        pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
        BUG_ON(!pmd_none(*pmd) || !pte);
        __pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
        pkmap_page_table = pte + PTRS_PER_PTE;
#endif
}

/*
 * paging_init() sets up the page tables, initialises the zone memory
 * maps, and sets up the zero page, bad page and bad page tables.
 */
void __init paging_init(struct machine_desc *mdesc)
{
        void *zero_page;

        build_mem_type_table();
        sanity_check_meminfo();
        prepare_page_table();
        bootmem_init();
        devicemaps_init(mdesc);
        kmap_init();

        top_pmd = pmd_off_k(0xffff0000);

        /*
         * allocate the zero page.  Note that this always succeeds and
         * returns a zeroed result.
         */
        zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
        empty_zero_page = virt_to_page(zero_page);
        flush_dcache_page(empty_zero_page);
}

/*
 * In order to soft-boot, we need to insert a 1:1 mapping in place of
 * the user-mode pages.  This will then ensure that we have predictable
 * results when turning the mmu off
 */
void setup_mm_for_reboot(char mode)
{
        unsigned long base_pmdval;
        pgd_t *pgd;
        int i;

        if (current->mm && current->mm->pgd)
                pgd = current->mm->pgd;
        else
                pgd = init_mm.pgd;

        base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
        if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
                base_pmdval |= PMD_BIT4;

        for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
                unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
                pmd_t *pmd;

                pmd = pmd_off(pgd, i << PGDIR_SHIFT);
                pmd[0] = __pmd(pmdval);
                pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
                flush_pmd_entry(pmd);
        }
}