Blackfin: move bf537-specific irq code out of common code
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / blackfin / mach-bf537 / ints-priority.c
blobcbf19011667b1071868b19444a0101ab0f6481f3
1 /*
2 * Copyright 2005-2009 Analog Devices Inc.
4 * Licensed under the GPL-2 or later.
6 * Set up the interrupt priorities
7 */
9 #include <linux/module.h>
10 #include <linux/irq.h>
11 #include <asm/blackfin.h>
13 #include <asm/irq_handler.h>
14 #include <asm/bfin5xx_spi.h>
15 #include <asm/bfin_sport.h>
16 #include <asm/bfin_can.h>
17 #include <asm/dpmc.h>
19 void __init program_IAR(void)
21 /* Program the IAR0 Register with the configured priority */
22 bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
23 ((CONFIG_IRQ_DMA_ERROR - 7) << IRQ_DMA_ERROR_POS) |
24 ((CONFIG_IRQ_ERROR - 7) << IRQ_ERROR_POS) |
25 ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
26 ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) |
27 ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
28 ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
29 ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS));
31 bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
32 ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
33 ((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) |
34 ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
35 ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS) |
36 ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
37 ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
38 ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS));
40 bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) |
41 ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
42 ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
43 ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
44 ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
45 ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
46 ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
47 ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
49 bfin_write_SIC_IAR3(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
50 ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
51 ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
52 ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) |
53 ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
54 ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
55 ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
56 ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS));
58 SSYNC();
61 #define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */
62 #define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */
63 #define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */
64 #define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */
65 #define UART_ERR_MASK (0x6) /* UART_IIR */
66 #define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */
68 static int error_int_mask;
70 static void bf537_generic_error_mask_irq(struct irq_data *d)
72 error_int_mask &= ~(1L << (d->irq - IRQ_PPI_ERROR));
73 if (!error_int_mask)
74 bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
77 static void bf537_generic_error_unmask_irq(struct irq_data *d)
79 bfin_internal_unmask_irq(IRQ_GENERIC_ERROR);
80 error_int_mask |= 1L << (d->irq - IRQ_PPI_ERROR);
83 static struct irq_chip bf537_generic_error_irqchip = {
84 .name = "ERROR",
85 .irq_ack = bfin_ack_noop,
86 .irq_mask_ack = bf537_generic_error_mask_irq,
87 .irq_mask = bf537_generic_error_mask_irq,
88 .irq_unmask = bf537_generic_error_unmask_irq,
91 static void bf537_demux_error_irq(unsigned int int_err_irq,
92 struct irq_desc *inta_desc)
94 int irq = 0;
96 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
97 if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
98 irq = IRQ_MAC_ERROR;
99 else
100 #endif
101 if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
102 irq = IRQ_SPORT0_ERROR;
103 else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
104 irq = IRQ_SPORT1_ERROR;
105 else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
106 irq = IRQ_PPI_ERROR;
107 else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
108 irq = IRQ_CAN_ERROR;
109 else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
110 irq = IRQ_SPI_ERROR;
111 else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
112 irq = IRQ_UART0_ERROR;
113 else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
114 irq = IRQ_UART1_ERROR;
116 if (irq) {
117 if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR)))
118 bfin_handle_irq(irq);
119 else {
121 switch (irq) {
122 case IRQ_PPI_ERROR:
123 bfin_write_PPI_STATUS(PPI_ERR_MASK);
124 break;
125 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
126 case IRQ_MAC_ERROR:
127 bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
128 break;
129 #endif
130 case IRQ_SPORT0_ERROR:
131 bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
132 break;
134 case IRQ_SPORT1_ERROR:
135 bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
136 break;
138 case IRQ_CAN_ERROR:
139 bfin_write_CAN_GIS(CAN_ERR_MASK);
140 break;
142 case IRQ_SPI_ERROR:
143 bfin_write_SPI_STAT(SPI_ERR_MASK);
144 break;
146 default:
147 break;
150 pr_debug("IRQ %d:"
151 " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
152 irq);
154 } else
155 pr_err("%s: IRQ ?: PERIPHERAL ERROR INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
156 __func__);
160 void __init init_mach_irq(void)
162 int irq;
164 #if defined(CONFIG_BF537) || defined(CONFIG_BF536)
165 /* Clear EMAC Interrupt Status bits so we can demux it later */
166 bfin_write_EMAC_SYSTAT(-1);
167 #endif
169 irq_set_chained_handler(IRQ_GENERIC_ERROR, bf537_demux_error_irq);
170 for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
171 irq_set_chip_and_handler(irq, &bf537_generic_error_irqchip,
172 handle_level_irq);
174 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
175 irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq);
176 #endif