DMAENGINE: ste_dma40: fix disabled channels list

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pci / pcie / pme.c

/*
 * PCIe Native PME support
 *
 * Copyright (C) 2007 - 2009 Intel Corp
 * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
 * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License V2.  See the file "COPYING" in the main directory of this archive
 * for more details.
 */

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/pcieport_if.h>
#include <linux/acpi.h>
#include <linux/pci-acpi.h>
#include <linux/pm_runtime.h>

#include "../pci.h"
#include "portdrv.h"

#define PCI_EXP_RTSTA_PME       0x10000 /* PME status */
#define PCI_EXP_RTSTA_PENDING   0x20000 /* PME pending */

/*
 * If this switch is set, MSI will not be used for PCIe PME signaling.  This
 * causes the PCIe port driver to use INTx interrupts only, but it turns out
 * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
 * wake-up from system sleep states.
 */
bool pcie_pme_msi_disabled;

static int __init pcie_pme_setup(char *str)
{
        if (!strncmp(str, "nomsi", 5))
                pcie_pme_msi_disabled = true;

        return 1;
}
__setup("pcie_pme=", pcie_pme_setup);

struct pcie_pme_service_data {
        spinlock_t lock;
        struct pcie_device *srv;
        struct work_struct work;
        bool noirq; /* Don't enable the PME interrupt used by this service. */
};

/**
 * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
 * @dev: PCIe root port or event collector.
 * @enable: Enable or disable the interrupt.
 */
void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
{
        int rtctl_pos;
        u16 rtctl;

        rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;

        pci_read_config_word(dev, rtctl_pos, &rtctl);
        if (enable)
                rtctl |= PCI_EXP_RTCTL_PMEIE;
        else
                rtctl &= ~PCI_EXP_RTCTL_PMEIE;
        pci_write_config_word(dev, rtctl_pos, rtctl);
}

/**
 * pcie_pme_clear_status - Clear root port PME interrupt status.
 * @dev: PCIe root port or event collector.
 */
static void pcie_pme_clear_status(struct pci_dev *dev)
{
        int rtsta_pos;
        u32 rtsta;

        rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;

        pci_read_config_dword(dev, rtsta_pos, &rtsta);
        rtsta |= PCI_EXP_RTSTA_PME;
        pci_write_config_dword(dev, rtsta_pos, rtsta);
}

/**
 * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
 * @bus: PCI bus to scan.
 *
 * Scan given PCI bus and all buses under it for devices asserting PME#.
 */
static bool pcie_pme_walk_bus(struct pci_bus *bus)
{
        struct pci_dev *dev;
        bool ret = false;

        list_for_each_entry(dev, &bus->devices, bus_list) {
                /* Skip PCIe devices in case we started from a root port. */
                if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
                        pm_request_resume(&dev->dev);
                        pci_wakeup_event(dev);
                        ret = true;
                }

                if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
                        ret = true;
        }

        return ret;
}

/**
 * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
 * @bus: Secondary bus of the bridge.
 * @devfn: Device/function number to check.
 *
 * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
 * PCIe PME message.  In such that case the bridge should use the Requester ID
 * of device/function number 0 on its secondary bus.
 */
static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
{
        struct pci_dev *dev;
        bool found = false;

        if (devfn)
                return false;

        dev = pci_dev_get(bus->self);
        if (!dev)
                return false;

        if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
                down_read(&pci_bus_sem);
                if (pcie_pme_walk_bus(bus))
                        found = true;
                up_read(&pci_bus_sem);
        }

        pci_dev_put(dev);
        return found;
}

/**
 * pcie_pme_handle_request - Find device that generated PME and handle it.
 * @port: Root port or event collector that generated the PME interrupt.
 * @req_id: PCIe Requester ID of the device that generated the PME.
 */
static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
{
        u8 busnr = req_id >> 8, devfn = req_id & 0xff;
        struct pci_bus *bus;
        struct pci_dev *dev;
        bool found = false;

        /* First, check if the PME is from the root port itself. */
        if (port->devfn == devfn && port->bus->number == busnr) {
                if (pci_check_pme_status(port)) {
                        pm_request_resume(&port->dev);
                        found = true;
                } else {
                        /*
                         * Apparently, the root port generated the PME on behalf
                         * of a non-PCIe device downstream.  If this is done by
                         * a root port, the Requester ID field in its status
                         * register may contain either the root port's, or the
                         * source device's information (PCI Express Base
                         * Specification, Rev. 2.0, Section 6.1.9).
                         */
                        down_read(&pci_bus_sem);
                        found = pcie_pme_walk_bus(port->subordinate);
                        up_read(&pci_bus_sem);
                }
                goto out;
        }

        /* Second, find the bus the source device is on. */
        bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
        if (!bus)
                goto out;

        /* Next, check if the PME is from a PCIe-PCI bridge. */
        found = pcie_pme_from_pci_bridge(bus, devfn);
        if (found)
                goto out;

        /* Finally, try to find the PME source on the bus. */
        down_read(&pci_bus_sem);
        list_for_each_entry(dev, &bus->devices, bus_list) {
                pci_dev_get(dev);
                if (dev->devfn == devfn) {
                        found = true;
                        break;
                }
                pci_dev_put(dev);
        }
        up_read(&pci_bus_sem);

        if (found) {
                /* The device is there, but we have to check its PME status. */
                found = pci_check_pme_status(dev);
                if (found) {
                        pm_request_resume(&dev->dev);
                        pci_wakeup_event(dev);
                }
                pci_dev_put(dev);
        } else if (devfn) {
                /*
                 * The device is not there, but we can still try to recover by
                 * assuming that the PME was reported by a PCIe-PCI bridge that
                 * used devfn different from zero.
                 */
                dev_dbg(&port->dev, "PME interrupt generated for "
                        "non-existent device %02x:%02x.%d\n",
                        busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
                found = pcie_pme_from_pci_bridge(bus, 0);
        }

 out:
        if (!found)
                dev_dbg(&port->dev, "Spurious native PME interrupt!\n");
}

/**
 * pcie_pme_work_fn - Work handler for PCIe PME interrupt.
 * @work: Work structure giving access to service data.
 */
static void pcie_pme_work_fn(struct work_struct *work)
{
        struct pcie_pme_service_data *data =
                        container_of(work, struct pcie_pme_service_data, work);
        struct pci_dev *port = data->srv->port;
        int rtsta_pos;
        u32 rtsta;

        rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;

        spin_lock_irq(&data->lock);

        for (;;) {
                if (data->noirq)
                        break;

                pci_read_config_dword(port, rtsta_pos, &rtsta);
                if (rtsta & PCI_EXP_RTSTA_PME) {
                        /*
                         * Clear PME status of the port.  If there are other
                         * pending PMEs, the status will be set again.
                         */
                        pcie_pme_clear_status(port);

                        spin_unlock_irq(&data->lock);
                        pcie_pme_handle_request(port, rtsta & 0xffff);
                        spin_lock_irq(&data->lock);

                        continue;
                }

                /* No need to loop if there are no more PMEs pending. */
                if (!(rtsta & PCI_EXP_RTSTA_PENDING))
                        break;

                spin_unlock_irq(&data->lock);
                cpu_relax();
                spin_lock_irq(&data->lock);
        }

        if (!data->noirq)
                pcie_pme_interrupt_enable(port, true);

        spin_unlock_irq(&data->lock);
}

/**
 * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
 * @irq: Interrupt vector.
 * @context: Interrupt context pointer.
 */
static irqreturn_t pcie_pme_irq(int irq, void *context)
{
        struct pci_dev *port;
        struct pcie_pme_service_data *data;
        int rtsta_pos;
        u32 rtsta;
        unsigned long flags;

        port = ((struct pcie_device *)context)->port;
        data = get_service_data((struct pcie_device *)context);

        rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;

        spin_lock_irqsave(&data->lock, flags);
        pci_read_config_dword(port, rtsta_pos, &rtsta);

        if (!(rtsta & PCI_EXP_RTSTA_PME)) {
                spin_unlock_irqrestore(&data->lock, flags);
                return IRQ_NONE;
        }

        pcie_pme_interrupt_enable(port, false);
        spin_unlock_irqrestore(&data->lock, flags);

        /* We don't use pm_wq, because it's freezable. */
        schedule_work(&data->work);

        return IRQ_HANDLED;
}

/**
 * pcie_pme_set_native - Set the PME interrupt flag for given device.
 * @dev: PCI device to handle.
 * @ign: Ignored.
 */
static int pcie_pme_set_native(struct pci_dev *dev, void *ign)
{
        dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n");

        device_set_run_wake(&dev->dev, true);
        dev->pme_interrupt = true;
        return 0;
}

/**
 * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port.
 * @port: PCIe root port or event collector to handle.
 *
 * For each device below given root port, including the port itself (or for each
 * root complex integrated endpoint if @port is a root complex event collector)
 * set the flag indicating that it can signal run-time wake-up events via PCIe
 * PME interrupts.
 */
static void pcie_pme_mark_devices(struct pci_dev *port)
{
        pcie_pme_set_native(port, NULL);
        if (port->subordinate) {
                pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL);
        } else {
                struct pci_bus *bus = port->bus;
                struct pci_dev *dev;

                /* Check if this is a root port event collector. */
                if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus)
                        return;

                down_read(&pci_bus_sem);
                list_for_each_entry(dev, &bus->devices, bus_list)
                        if (pci_is_pcie(dev)
                            && dev->pcie_type == PCI_EXP_TYPE_RC_END)
                                pcie_pme_set_native(dev, NULL);
                up_read(&pci_bus_sem);
        }
}

/**
 * pcie_pme_probe - Initialize PCIe PME service for given root port.
 * @srv: PCIe service to initialize.
 */
static int pcie_pme_probe(struct pcie_device *srv)
{
        struct pci_dev *port;
        struct pcie_pme_service_data *data;
        int ret;

        data = kzalloc(sizeof(*data), GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        spin_lock_init(&data->lock);
        INIT_WORK(&data->work, pcie_pme_work_fn);
        data->srv = srv;
        set_service_data(srv, data);

        port = srv->port;
        pcie_pme_interrupt_enable(port, false);
        pcie_pme_clear_status(port);

        ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
        if (ret) {
                kfree(data);
        } else {
                pcie_pme_mark_devices(port);
                pcie_pme_interrupt_enable(port, true);
        }

        return ret;
}

/**
 * pcie_pme_suspend - Suspend PCIe PME service device.
 * @srv: PCIe service device to suspend.
 */
static int pcie_pme_suspend(struct pcie_device *srv)
{
        struct pcie_pme_service_data *data = get_service_data(srv);
        struct pci_dev *port = srv->port;

        spin_lock_irq(&data->lock);
        pcie_pme_interrupt_enable(port, false);
        pcie_pme_clear_status(port);
        data->noirq = true;
        spin_unlock_irq(&data->lock);

        synchronize_irq(srv->irq);

        return 0;
}

/**
 * pcie_pme_resume - Resume PCIe PME service device.
 * @srv - PCIe service device to resume.
 */
static int pcie_pme_resume(struct pcie_device *srv)
{
        struct pcie_pme_service_data *data = get_service_data(srv);
        struct pci_dev *port = srv->port;

        spin_lock_irq(&data->lock);
        data->noirq = false;
        pcie_pme_clear_status(port);
        pcie_pme_interrupt_enable(port, true);
        spin_unlock_irq(&data->lock);

        return 0;
}

/**
 * pcie_pme_remove - Prepare PCIe PME service device for removal.
 * @srv - PCIe service device to resume.
 */
static void pcie_pme_remove(struct pcie_device *srv)
{
        pcie_pme_suspend(srv);
        free_irq(srv->irq, srv);
        kfree(get_service_data(srv));
}

static struct pcie_port_service_driver pcie_pme_driver = {
        .name           = "pcie_pme",
        .port_type      = PCI_EXP_TYPE_ROOT_PORT,
        .service        = PCIE_PORT_SERVICE_PME,

        .probe          = pcie_pme_probe,
        .suspend        = pcie_pme_suspend,
        .resume         = pcie_pme_resume,
        .remove         = pcie_pme_remove,
};

/**
 * pcie_pme_service_init - Register the PCIe PME service driver.
 */
static int __init pcie_pme_service_init(void)
{
        return pcie_port_service_register(&pcie_pme_driver);
}

module_init(pcie_pme_service_init);