include/linux/serial_core.h

   1 /*
   2  *  linux/drivers/char/serial_core.h
   3  *
   4  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19  */
  20 #ifndef LINUX_SERIAL_CORE_H
  21 #define LINUX_SERIAL_CORE_H
  22
  23 #include <linux/serial.h>
  24
  25 /*
  26  * The type definitions.  These are from Ted Ts'o's serial.h
  27  */
  28 #define PORT_UNKNOWN    0
  29 #define PORT_8250       1
  30 #define PORT_16450      2
  31 #define PORT_16550      3
  32 #define PORT_16550A     4
  33 #define PORT_CIRRUS     5
  34 #define PORT_16650      6
  35 #define PORT_16650V2    7
  36 #define PORT_16750      8
  37 #define PORT_STARTECH   9
  38 #define PORT_16C950     10
  39 #define PORT_16654      11
  40 #define PORT_16850      12
  41 #define PORT_RSA        13
  42 #define PORT_NS16550A   14
  43 #define PORT_XSCALE     15
  44 #define PORT_RM9000     16      /* PMC-Sierra RM9xxx internal UART */
  45 #define PORT_OCTEON     17      /* Cavium OCTEON internal UART */
  46 #define PORT_AR7        18      /* Texas Instruments AR7 internal UART */
  47 #define PORT_U6_16550A  19      /* ST-Ericsson U6xxx internal UART */
  48 #define PORT_TEGRA      20      /* NVIDIA Tegra internal UART */
  49 #define PORT_MAX_8250   20      /* max port ID */
  50
  51 /*
  52  * ARM specific type numbers.  These are not currently guaranteed
  53  * to be implemented, and will change in the future.  These are
  54  * separate so any additions to the old serial.c that occur before
  55  * we are merged can be easily merged here.
  56  */
  57 #define PORT_PXA        31
  58 #define PORT_AMBA       32
  59 #define PORT_CLPS711X   33
  60 #define PORT_SA1100     34
  61 #define PORT_UART00     35
  62 #define PORT_21285      37
  63
  64 /* Sparc type numbers.  */
  65 #define PORT_SUNZILOG   38
  66 #define PORT_SUNSAB     39
  67
  68 /* DEC */
  69 #define PORT_DZ         46
  70 #define PORT_ZS         47
  71
  72 /* Parisc type numbers. */
  73 #define PORT_MUX        48
  74
  75 /* Atmel AT91 / AT32 SoC */
  76 #define PORT_ATMEL      49
  77
  78 /* Macintosh Zilog type numbers */
  79 #define PORT_MAC_ZILOG  50      /* m68k : not yet implemented */
  80 #define PORT_PMAC_ZILOG 51
  81
  82 /* SH-SCI */
  83 #define PORT_SCI        52
  84 #define PORT_SCIF       53
  85 #define PORT_IRDA       54
  86
  87 /* Samsung S3C2410 SoC and derivatives thereof */
  88 #define PORT_S3C2410    55
  89
  90 /* SGI IP22 aka Indy / Challenge S / Indigo 2 */
  91 #define PORT_IP22ZILOG  56
  92
  93 /* Sharp LH7a40x -- an ARM9 SoC series */
  94 #define PORT_LH7A40X    57
  95
  96 /* PPC CPM type number */
  97 #define PORT_CPM        58
  98
  99 /* MPC52xx (and MPC512x) type numbers */
 100 #define PORT_MPC52xx    59
 101
 102 /* IBM icom */
 103 #define PORT_ICOM       60
 104
 105 /* Samsung S3C2440 SoC */
 106 #define PORT_S3C2440    61
 107
 108 /* Motorola i.MX SoC */
 109 #define PORT_IMX        62
 110
 111 /* Marvell MPSC */
 112 #define PORT_MPSC       63
 113
 114 /* TXX9 type number */
 115 #define PORT_TXX9       64
 116
 117 /* NEC VR4100 series SIU/DSIU */
 118 #define PORT_VR41XX_SIU         65
 119 #define PORT_VR41XX_DSIU        66
 120
 121 /* Samsung S3C2400 SoC */
 122 #define PORT_S3C2400    67
 123
 124 /* M32R SIO */
 125 #define PORT_M32R_SIO   68
 126
 127 /*Digi jsm */
 128 #define PORT_JSM        69
 129
 130 #define PORT_PNX8XXX    70
 131
 132 /* Hilscher netx */
 133 #define PORT_NETX       71
 134
 135 /* SUN4V Hypervisor Console */
 136 #define PORT_SUNHV      72
 137
 138 #define PORT_S3C2412    73
 139
 140 /* Xilinx uartlite */
 141 #define PORT_UARTLITE   74
 142
 143 /* Blackfin bf5xx */
 144 #define PORT_BFIN       75
 145
 146 /* Micrel KS8695 */
 147 #define PORT_KS8695     76
 148
 149 /* Broadcom SB1250, etc. SOC */
 150 #define PORT_SB1250_DUART       77
 151
 152 /* Freescale ColdFire */
 153 #define PORT_MCF        78
 154
 155 /* Blackfin SPORT */
 156 #define PORT_BFIN_SPORT         79
 157
 158 /* MN10300 on-chip UART numbers */
 159 #define PORT_MN10300            80
 160 #define PORT_MN10300_CTS        81
 161
 162 #define PORT_SC26XX     82
 163
 164 /* SH-SCI */
 165 #define PORT_SCIFA      83
 166
 167 #define PORT_S3C6400    84
 168
 169 /* NWPSERIAL */
 170 #define PORT_NWPSERIAL  85
 171
 172 /* MAX3100 */
 173 #define PORT_MAX3100    86
 174
 175 /* Timberdale UART */
 176 #define PORT_TIMBUART   87
 177
 178 /* Qualcomm MSM SoCs */
 179 #define PORT_MSM        88
 180
 181 /* BCM63xx family SoCs */
 182 #define PORT_BCM63XX    89
 183
 184 /* Aeroflex Gaisler GRLIB APBUART */
 185 #define PORT_APBUART    90
 186
 187 /* Altera UARTs */
 188 #define PORT_ALTERA_JTAGUART    91
 189 #define PORT_ALTERA_UART        92
 190
 191 /* SH-SCI */
 192 #define PORT_SCIFB      93
 193
 194 /* MAX3107 */
 195 #define PORT_MAX3107    94
 196
 197 /* High Speed UART for Medfield */
 198 #define PORT_MFD        95
 199
 200 /* TI OMAP-UART */
 201 #define PORT_OMAP       96
 202
 203 /* VIA VT8500 SoC */
 204 #define PORT_VT8500     97
 205
 206 /* Xilinx PSS UART */
 207 #define PORT_XUARTPS    98
 208
 209 #ifdef __KERNEL__
 210
 211 #include <linux/compiler.h>
 212 #include <linux/interrupt.h>
 213 #include <linux/circ_buf.h>
 214 #include <linux/spinlock.h>
 215 #include <linux/sched.h>
 216 #include <linux/tty.h>
 217 #include <linux/mutex.h>
 218 #include <linux/sysrq.h>
 219 #include <linux/pps_kernel.h>
 220
 221 struct uart_port;
 222 struct serial_struct;
 223 struct device;
 224
 225 /*
 226  * This structure describes all the operations that can be
 227  * done on the physical hardware.
 228  */
 229 struct uart_ops {
 230         unsigned int    (*tx_empty)(struct uart_port *);
 231         void            (*set_mctrl)(struct uart_port *, unsigned int mctrl);
 232         unsigned int    (*get_mctrl)(struct uart_port *);
 233         void            (*stop_tx)(struct uart_port *);
 234         void            (*start_tx)(struct uart_port *);
 235         void            (*send_xchar)(struct uart_port *, char ch);
 236         void            (*stop_rx)(struct uart_port *);
 237         void            (*enable_ms)(struct uart_port *);
 238         void            (*break_ctl)(struct uart_port *, int ctl);
 239         int             (*startup)(struct uart_port *);
 240         void            (*shutdown)(struct uart_port *);
 241         void            (*flush_buffer)(struct uart_port *);
 242         void            (*set_termios)(struct uart_port *, struct ktermios *new,
 243                                        struct ktermios *old);
 244         void            (*set_ldisc)(struct uart_port *, int new);
 245         void            (*pm)(struct uart_port *, unsigned int state,
 246                               unsigned int oldstate);
 247         int             (*set_wake)(struct uart_port *, unsigned int state);
 248
 249         /*
 250          * Return a string describing the type of the port
 251          */
 252         const char *(*type)(struct uart_port *);
 253
 254         /*
 255          * Release IO and memory resources used by the port.
 256          * This includes iounmap if necessary.
 257          */
 258         void            (*release_port)(struct uart_port *);
 259
 260         /*
 261          * Request IO and memory resources used by the port.
 262          * This includes iomapping the port if necessary.
 263          */
 264         int             (*request_port)(struct uart_port *);
 265         void            (*config_port)(struct uart_port *, int);
 266         int             (*verify_port)(struct uart_port *, struct serial_struct *);
 267         int             (*ioctl)(struct uart_port *, unsigned int, unsigned long);
 268 #ifdef CONFIG_CONSOLE_POLL
 269         void    (*poll_put_char)(struct uart_port *, unsigned char);
 270         int             (*poll_get_char)(struct uart_port *);
 271 #endif
 272 };
 273
 274 #define NO_POLL_CHAR            0x00ff0000
 275 #define UART_CONFIG_TYPE        (1 << 0)
 276 #define UART_CONFIG_IRQ         (1 << 1)
 277
 278 struct uart_icount {
 279         __u32   cts;
 280         __u32   dsr;
 281         __u32   rng;
 282         __u32   dcd;
 283         __u32   rx;
 284         __u32   tx;
 285         __u32   frame;
 286         __u32   overrun;
 287         __u32   parity;
 288         __u32   brk;
 289         __u32   buf_overrun;
 290 };
 291
 292 typedef unsigned int __bitwise__ upf_t;
 293
 294 struct uart_port {
 295         spinlock_t              lock;                   /* port lock */
 296         unsigned long           iobase;                 /* in/out[bwl] */
 297         unsigned char __iomem   *membase;               /* read/write[bwl] */
 298         unsigned int            (*serial_in)(struct uart_port *, int);
 299         void                    (*serial_out)(struct uart_port *, int, int);
 300         void                    (*set_termios)(struct uart_port *,
 301                                                struct ktermios *new,
 302                                                struct ktermios *old);
 303         void                    (*pm)(struct uart_port *, unsigned int state,
 304                                       unsigned int old);
 305         unsigned int            irq;                    /* irq number */
 306         unsigned long           irqflags;               /* irq flags  */
 307         unsigned int            uartclk;                /* base uart clock */
 308         unsigned int            fifosize;               /* tx fifo size */
 309         unsigned char           x_char;                 /* xon/xoff char */
 310         unsigned char           regshift;               /* reg offset shift */
 311         unsigned char           iotype;                 /* io access style */
 312         unsigned char           unused1;
 313
 314 #define UPIO_PORT               (0)
 315 #define UPIO_HUB6               (1)
 316 #define UPIO_MEM                (2)
 317 #define UPIO_MEM32              (3)
 318 #define UPIO_AU                 (4)                     /* Au1x00 type IO */
 319 #define UPIO_TSI                (5)                     /* Tsi108/109 type IO */
 320 #define UPIO_DWAPB              (6)                     /* DesignWare APB UART */
 321 #define UPIO_RM9000             (7)                     /* RM9000 type IO */
 322 #define UPIO_DWAPB32            (8)                     /* DesignWare APB UART (32 bit accesses) */
 323
 324         unsigned int            read_status_mask;       /* driver specific */
 325         unsigned int            ignore_status_mask;     /* driver specific */
 326         struct uart_state       *state;                 /* pointer to parent state */
 327         struct uart_icount      icount;                 /* statistics */
 328
 329         struct console          *cons;                  /* struct console, if any */
 330 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
 331         unsigned long           sysrq;                  /* sysrq timeout */
 332 #endif
 333
 334         upf_t                   flags;
 335
 336 #define UPF_FOURPORT            ((__force upf_t) (1 << 1))
 337 #define UPF_SAK                 ((__force upf_t) (1 << 2))
 338 #define UPF_SPD_MASK            ((__force upf_t) (0x1030))
 339 #define UPF_SPD_HI              ((__force upf_t) (0x0010))
 340 #define UPF_SPD_VHI             ((__force upf_t) (0x0020))
 341 #define UPF_SPD_CUST            ((__force upf_t) (0x0030))
 342 #define UPF_SPD_SHI             ((__force upf_t) (0x1000))
 343 #define UPF_SPD_WARP            ((__force upf_t) (0x1010))
 344 #define UPF_SKIP_TEST           ((__force upf_t) (1 << 6))
 345 #define UPF_AUTO_IRQ            ((__force upf_t) (1 << 7))
 346 #define UPF_HARDPPS_CD          ((__force upf_t) (1 << 11))
 347 #define UPF_LOW_LATENCY         ((__force upf_t) (1 << 13))
 348 #define UPF_BUGGY_UART          ((__force upf_t) (1 << 14))
 349 #define UPF_NO_TXEN_TEST        ((__force upf_t) (1 << 15))
 350 #define UPF_MAGIC_MULTIPLIER    ((__force upf_t) (1 << 16))
 351 #define UPF_CONS_FLOW           ((__force upf_t) (1 << 23))
 352 #define UPF_SHARE_IRQ           ((__force upf_t) (1 << 24))
 353 /* The exact UART type is known and should not be probed.  */
 354 #define UPF_FIXED_TYPE          ((__force upf_t) (1 << 27))
 355 #define UPF_BOOT_AUTOCONF       ((__force upf_t) (1 << 28))
 356 #define UPF_FIXED_PORT          ((__force upf_t) (1 << 29))
 357 #define UPF_DEAD                ((__force upf_t) (1 << 30))
 358 #define UPF_IOREMAP             ((__force upf_t) (1 << 31))
 359
 360 #define UPF_CHANGE_MASK         ((__force upf_t) (0x17fff))
 361 #define UPF_USR_MASK            ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
 362
 363         unsigned int            mctrl;                  /* current modem ctrl settings */
 364         unsigned int            timeout;                /* character-based timeout */
 365         unsigned int            type;                   /* port type */
 366         const struct uart_ops   *ops;
 367         unsigned int            custom_divisor;
 368         unsigned int            line;                   /* port index */
 369         resource_size_t         mapbase;                /* for ioremap */
 370         struct device           *dev;                   /* parent device */
 371         unsigned char           hub6;                   /* this should be in the 8250 driver */
 372         unsigned char           suspended;
 373         unsigned char           irq_wake;
 374         unsigned char           unused[2];
 375         void                    *private_data;          /* generic platform data pointer */
 376 };
 377
 378 /*
 379  * This is the state information which is persistent across opens.
 380  */
 381 struct uart_state {
 382         struct tty_port         port;
 383
 384         int                     pm_state;
 385         struct circ_buf         xmit;
 386
 387         struct tasklet_struct   tlet;
 388         struct uart_port        *uart_port;
 389 };
 390
 391 #define UART_XMIT_SIZE  PAGE_SIZE
 392
 393
 394 /* number of characters left in xmit buffer before we ask for more */
 395 #define WAKEUP_CHARS            256
 396
 397 struct module;
 398 struct tty_driver;
 399
 400 struct uart_driver {
 401         struct module           *owner;
 402         const char              *driver_name;
 403         const char              *dev_name;
 404         int                      major;
 405         int                      minor;
 406         int                      nr;
 407         struct console          *cons;
 408
 409         /*
 410          * these are private; the low level driver should not
 411          * touch these; they should be initialised to NULL
 412          */
 413         struct uart_state       *state;
 414         struct tty_driver       *tty_driver;
 415 };
 416
 417 void uart_write_wakeup(struct uart_port *port);
 418
 419 /*
 420  * Baud rate helpers.
 421  */
 422 void uart_update_timeout(struct uart_port *port, unsigned int cflag,
 423                          unsigned int baud);
 424 unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 425                                 struct ktermios *old, unsigned int min,
 426                                 unsigned int max);
 427 unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
 428
 429 /* Base timer interval for polling */
 430 static inline int uart_poll_timeout(struct uart_port *port)
 431 {
 432         int timeout = port->timeout;
 433
 434         return timeout > 6 ? (timeout / 2 - 2) : 1;
 435 }
 436
 437 /*
 438  * Console helpers.
 439  */
 440 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
 441                                    struct console *c);
 442 void uart_parse_options(char *options, int *baud, int *parity, int *bits,
 443                         int *flow);
 444 int uart_set_options(struct uart_port *port, struct console *co, int baud,
 445                      int parity, int bits, int flow);
 446 struct tty_driver *uart_console_device(struct console *co, int *index);
 447 void uart_console_write(struct uart_port *port, const char *s,
 448                         unsigned int count,
 449                         void (*putchar)(struct uart_port *, int));
 450
 451 /*
 452  * Port/driver registration/removal
 453  */
 454 int uart_register_driver(struct uart_driver *uart);
 455 void uart_unregister_driver(struct uart_driver *uart);
 456 int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
 457 int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
 458 int uart_match_port(struct uart_port *port1, struct uart_port *port2);
 459
 460 /*
 461  * Power Management
 462  */
 463 int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
 464 int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
 465
 466 #define uart_circ_empty(circ)           ((circ)->head == (circ)->tail)
 467 #define uart_circ_clear(circ)           ((circ)->head = (circ)->tail = 0)
 468
 469 #define uart_circ_chars_pending(circ)   \
 470         (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
 471
 472 #define uart_circ_chars_free(circ)      \
 473         (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
 474
 475 static inline int uart_tx_stopped(struct uart_port *port)
 476 {
 477         struct tty_struct *tty = port->state->port.tty;
 478         if(tty->stopped || tty->hw_stopped)
 479                 return 1;
 480         return 0;
 481 }
 482
 483 /*
 484  * The following are helper functions for the low level drivers.
 485  */
 486 static inline int
 487 uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
 488 {
 489 #ifdef SUPPORT_SYSRQ
 490         if (port->sysrq) {
 491                 if (ch && time_before(jiffies, port->sysrq)) {
 492                         handle_sysrq(ch);
 493                         port->sysrq = 0;
 494                         return 1;
 495                 }
 496                 port->sysrq = 0;
 497         }
 498 #endif
 499         return 0;
 500 }
 501 #ifndef SUPPORT_SYSRQ
 502 #define uart_handle_sysrq_char(port,ch) uart_handle_sysrq_char(port, 0)
 503 #endif
 504
 505 /*
 506  * We do the SysRQ and SAK checking like this...
 507  */
 508 static inline int uart_handle_break(struct uart_port *port)
 509 {
 510         struct uart_state *state = port->state;
 511 #ifdef SUPPORT_SYSRQ
 512         if (port->cons && port->cons->index == port->line) {
 513                 if (!port->sysrq) {
 514                         port->sysrq = jiffies + HZ*5;
 515                         return 1;
 516                 }
 517                 port->sysrq = 0;
 518         }
 519 #endif
 520         if (port->flags & UPF_SAK)
 521                 do_SAK(state->port.tty);
 522         return 0;
 523 }
 524
 525 /**
 526  *      uart_handle_dcd_change - handle a change of carrier detect state
 527  *      @uport: uart_port structure for the open port
 528  *      @status: new carrier detect status, nonzero if active
 529  */
 530 static inline void
 531 uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 532 {
 533         struct uart_state *state = uport->state;
 534         struct tty_port *port = &state->port;
 535         struct tty_ldisc *ld = tty_ldisc_ref(port->tty);
 536         struct pps_event_time ts;
 537
 538         if (ld && ld->ops->dcd_change)
 539                 pps_get_ts(&ts);
 540
 541         uport->icount.dcd++;
 542 #ifdef CONFIG_HARD_PPS
 543         if ((uport->flags & UPF_HARDPPS_CD) && status)
 544                 hardpps();
 545 #endif
 546
 547         if (port->flags & ASYNC_CHECK_CD) {
 548                 if (status)
 549                         wake_up_interruptible(&port->open_wait);
 550                 else if (port->tty)
 551                         tty_hangup(port->tty);
 552         }
 553
 554         if (ld && ld->ops->dcd_change)
 555                 ld->ops->dcd_change(port->tty, status, &ts);
 556         if (ld)
 557                 tty_ldisc_deref(ld);
 558 }
 559
 560 /**
 561  *      uart_handle_cts_change - handle a change of clear-to-send state
 562  *      @uport: uart_port structure for the open port
 563  *      @status: new clear to send status, nonzero if active
 564  */
 565 static inline void
 566 uart_handle_cts_change(struct uart_port *uport, unsigned int status)
 567 {
 568         struct tty_port *port = &uport->state->port;
 569         struct tty_struct *tty = port->tty;
 570
 571         uport->icount.cts++;
 572
 573         if (port->flags & ASYNC_CTS_FLOW) {
 574                 if (tty->hw_stopped) {
 575                         if (status) {
 576                                 tty->hw_stopped = 0;
 577                                 uport->ops->start_tx(uport);
 578                                 uart_write_wakeup(uport);
 579                         }
 580                 } else {
 581                         if (!status) {
 582                                 tty->hw_stopped = 1;
 583                                 uport->ops->stop_tx(uport);
 584                         }
 585                 }
 586         }
 587 }
 588
 589 #include <linux/tty_flip.h>
 590
 591 static inline void
 592 uart_insert_char(struct uart_port *port, unsigned int status,
 593                  unsigned int overrun, unsigned int ch, unsigned int flag)
 594 {
 595         struct tty_struct *tty = port->state->port.tty;
 596
 597         if ((status & port->ignore_status_mask & ~overrun) == 0)
 598                 tty_insert_flip_char(tty, ch, flag);
 599
 600         /*
 601          * Overrun is special.  Since it's reported immediately,
 602          * it doesn't affect the current character.
 603          */
 604         if (status & ~port->ignore_status_mask & overrun)
 605                 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 606 }
 607
 608 /*
 609  *      UART_ENABLE_MS - determine if port should enable modem status irqs
 610  */
 611 #define UART_ENABLE_MS(port,cflag)      ((port)->flags & UPF_HARDPPS_CD || \
 612                                          (cflag) & CRTSCTS || \
 613                                          !((cflag) & CLOCAL))
 614
 615 #endif
 616
 617 #endif /* LINUX_SERIAL_CORE_H */