drivers/block/paride/on26.c

   1 /*
   2         on26.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
   3                               Under the terms of the GNU General Public License.
   4
   5         on26.c is a low-level protocol driver for the
   6         OnSpec 90c26 parallel to IDE adapter chip.
   7
   8 */
   9
  10 /* Changes:
  11
  12         1.01    GRG 1998.05.06 init_proto, release_proto
  13         1.02    GRG 1998.09.23 updates for the -E rev chip
  14         1.03    GRG 1998.12.14 fix for slave drives
  15         1.04    GRG 1998.12.20 yet another bug fix
  16
  17 */
  18
  19 #define ON26_VERSION      "1.04"
  20
  21 #include <linux/module.h>
  22 #include <linux/init.h>
  23 #include <linux/delay.h>
  24 #include <linux/kernel.h>
  25 #include <linux/types.h>
  26 #include <linux/wait.h>
  27 #include <asm/io.h>
  28
  29 #include "paride.h"
  30
  31 /* mode codes:  0  nybble reads, 8-bit writes
  32                 1  8-bit reads and writes
  33                 2  8-bit EPP mode
  34                 3  EPP-16
  35                 4  EPP-32
  36 */
  37
  38 #define j44(a,b)  (((a>>4)&0x0f)|(b&0xf0))
  39
  40 #define P1      w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
  41 #define P2      w2(5);w2(7);w2(5);w2(4);
  42
  43 /* cont = 0 - access the IDE register file
  44    cont = 1 - access the IDE command set
  45 */
  46
  47 static int on26_read_regr( PIA *pi, int cont, int regr )
  48
  49 {       int     a, b, r;
  50
  51         r = (regr<<2) + 1 + cont;
  52
  53         switch (pi->mode)  {
  54
  55         case 0: w0(1); P1; w0(r); P2; w0(0); P1;
  56                 w2(6); a = r1(); w2(4);
  57                 w2(6); b = r1(); w2(4);
  58                 w2(6); w2(4); w2(6); w2(4);
  59                 return j44(a,b);
  60
  61         case 1: w0(1); P1; w0(r); P2; w0(0); P1;
  62                 w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
  63                 return a;
  64
  65         case 2:
  66         case 3:
  67         case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
  68                 w3(0); w3(0); w2(0x24); a = r4(); w2(4);
  69                 w2(0x24); (void)r4(); w2(4);
  70                 return a;
  71
  72         }
  73         return -1;
  74 }
  75
  76 static void on26_write_regr( PIA *pi, int cont, int regr, int val )
  77
  78 {       int  r;
  79
  80         r = (regr<<2) + 1 + cont;
  81
  82         switch (pi->mode)  {
  83
  84         case 0:
  85         case 1: w0(1); P1; w0(r); P2; w0(0); P1;
  86                 w0(val); P2; w0(val); P2;
  87                 break;
  88
  89         case 2:
  90         case 3:
  91         case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
  92                 w3(0); w3(0);
  93                 w2(5); w4(val); w2(4);
  94                 w2(5); w4(val); w2(4);
  95                 break;
  96         }
  97 }
  98
  99 #define  CCP(x)  w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
 100                  w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
 101
 102 static void on26_connect ( PIA *pi )
 103
 104 {       int     x;
 105
 106         pi->saved_r0 = r0();
 107         pi->saved_r2 = r2();
 108
 109         CCP(0x20);
 110         x = 8; if (pi->mode) x = 9;
 111
 112         w0(2); P1; w0(8); P2;
 113         w0(2); P1; w0(x); P2;
 114 }
 115
 116 static void on26_disconnect ( PIA *pi )
 117
 118 {       if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
 119                       else { w0(4); P1; w0(4); P1; }
 120         CCP(0x30);
 121         w0(pi->saved_r0);
 122         w2(pi->saved_r2);
 123 }
 124
 125 #define RESET_WAIT  200
 126
 127 static int on26_test_port( PIA *pi)  /* hard reset */
 128
 129 {       int     i, m, d, x=0, y=0;
 130
 131         pi->saved_r0 = r0();
 132         pi->saved_r2 = r2();
 133
 134         d = pi->delay;
 135         m = pi->mode;
 136         pi->delay = 5;
 137         pi->mode = 0;
 138
 139         w2(0xc);
 140
 141         CCP(0x30); CCP(0);
 142
 143         w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
 144         i = ((r1() & 0xf0) << 4); w0(0x87);
 145         i |= (r1() & 0xf0); w0(0x78);
 146         w0(0x20);w2(4);w2(5);
 147         i |= ((r1() & 0xf0) >> 4);
 148         w2(4);w0(0xff);
 149
 150         if (i == 0xb5f) {
 151
 152             w0(2); P1; w0(0);   P2;
 153             w0(3); P1; w0(0);   P2;
 154             w0(2); P1; w0(8);   P2; udelay(100);
 155             w0(2); P1; w0(0xa); P2; udelay(100);
 156             w0(2); P1; w0(8);   P2; udelay(1000);
 157
 158             on26_write_regr(pi,0,6,0xa0);
 159
 160             for (i=0;i<RESET_WAIT;i++) {
 161                 on26_write_regr(pi,0,6,0xa0);
 162                 x = on26_read_regr(pi,0,7);
 163                 on26_write_regr(pi,0,6,0xb0);
 164                 y = on26_read_regr(pi,0,7);
 165                 if (!((x&0x80)||(y&0x80))) break;
 166                 mdelay(100);
 167             }
 168
 169             if (i == RESET_WAIT)
 170                 printk("on26: Device reset failed (%x,%x)\n",x,y);
 171
 172             w0(4); P1; w0(4); P1;
 173         }
 174
 175         CCP(0x30);
 176
 177         pi->delay = d;
 178         pi->mode = m;
 179         w0(pi->saved_r0);
 180         w2(pi->saved_r2);
 181
 182         return 5;
 183 }
 184
 185
 186 static void on26_read_block( PIA *pi, char * buf, int count )
 187
 188 {       int     k, a, b;
 189
 190         switch (pi->mode) {
 191
 192         case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
 193                 udelay(10);
 194                 for (k=0;k<count;k++) {
 195                         w2(6); a = r1();
 196                         w2(4); b = r1();
 197                         buf[k] = j44(a,b);
 198                 }
 199                 w0(2); P1; w0(8); P2;
 200                 break;
 201
 202         case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
 203                 udelay(10);
 204                 for (k=0;k<count/2;k++) {
 205                         w2(0x26); buf[2*k] = r0();
 206                         w2(0x24); buf[2*k+1] = r0();
 207                 }
 208                 w0(2); P1; w0(9); P2;
 209                 break;
 210
 211         case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
 212                 w3(0); w3(0); w2(0x24);
 213                 udelay(10);
 214                 for (k=0;k<count;k++) buf[k] = r4();
 215                 w2(4);
 216                 break;
 217
 218         case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
 219                 w3(0); w3(0); w2(0x24);
 220                 udelay(10);
 221                 for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
 222                 w2(4);
 223                 break;
 224
 225         case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
 226                 w3(0); w3(0); w2(0x24);
 227                 udelay(10);
 228                 for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
 229                 w2(4);
 230                 break;
 231
 232         }
 233 }
 234
 235 static void on26_write_block( PIA *pi, char * buf, int count )
 236
 237 {       int     k;
 238
 239         switch (pi->mode) {
 240
 241         case 0:
 242         case 1: w0(1); P1; w0(1); P2;
 243                 w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
 244                 udelay(10);
 245                 for (k=0;k<count/2;k++) {
 246                         w2(5); w0(buf[2*k]);
 247                         w2(7); w0(buf[2*k+1]);
 248                 }
 249                 w2(5); w2(4);
 250                 w0(2); P1; w0(8+pi->mode); P2;
 251                 break;
 252
 253         case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
 254                 w3(0); w3(0); w2(0xc5);
 255                 udelay(10);
 256                 for (k=0;k<count;k++) w4(buf[k]);
 257                 w2(0xc4);
 258                 break;
 259
 260         case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
 261                 w3(0); w3(0); w2(0xc5);
 262                 udelay(10);
 263                 for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
 264                 w2(0xc4);
 265                 break;
 266
 267         case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
 268                 w3(0); w3(0); w2(0xc5);
 269                 udelay(10);
 270                 for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
 271                 w2(0xc4);
 272                 break;
 273
 274         }
 275
 276 }
 277
 278 static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
 279
 280 {       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
 281                                    "EPP-16","EPP-32"};
 282
 283         printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ",
 284                 pi->device,ON26_VERSION,pi->port);
 285         printk("mode %d (%s), delay %d\n",pi->mode,
 286                 mode_string[pi->mode],pi->delay);
 287
 288 }
 289
 290 static struct pi_protocol on26 = {
 291         .owner          = THIS_MODULE,
 292         .name           = "on26",
 293         .max_mode       = 5,
 294         .epp_first      = 2,
 295         .default_delay  = 1,
 296         .max_units      = 1,
 297         .write_regr     = on26_write_regr,
 298         .read_regr      = on26_read_regr,
 299         .write_block    = on26_write_block,
 300         .read_block     = on26_read_block,
 301         .connect        = on26_connect,
 302         .disconnect     = on26_disconnect,
 303         .test_port      = on26_test_port,
 304         .log_adapter    = on26_log_adapter,
 305 };
 306
 307 static int __init on26_init(void)
 308 {
 309         return paride_register(&on26)-1;
 310 }
 311
 312 static void __exit on26_exit(void)
 313 {
 314         paride_unregister(&on26);
 315 }
 316
 317 MODULE_LICENSE("GPL");
 318 module_init(on26_init)
 319 module_exit(on26_exit)