driver core: Implement ns directory support for device classes.
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / eisa / eisa-bus.c
blob806c77bfd434e7b6459197627265d8367340e4a2
1 /*
2 * EISA bus support functions for sysfs.
4 * (C) 2002, 2003 Marc Zyngier <maz@wild-wind.fr.eu.org>
6 * This code is released under the GPL version 2.
7 */
9 #include <linux/kernel.h>
10 #include <linux/device.h>
11 #include <linux/eisa.h>
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/init.h>
15 #include <linux/slab.h>
16 #include <linux/ioport.h>
17 #include <asm/io.h>
19 #define SLOT_ADDRESS(r,n) (r->bus_base_addr + (0x1000 * n))
21 #define EISA_DEVINFO(i,s) { .id = { .sig = i }, .name = s }
23 struct eisa_device_info {
24 struct eisa_device_id id;
25 char name[50];
28 #ifdef CONFIG_EISA_NAMES
29 static struct eisa_device_info __initdata eisa_table[] = {
30 #include "devlist.h"
32 #define EISA_INFOS (sizeof (eisa_table) / (sizeof (struct eisa_device_info)))
33 #endif
35 #define EISA_MAX_FORCED_DEV 16
37 static int enable_dev[EISA_MAX_FORCED_DEV];
38 static unsigned int enable_dev_count;
39 static int disable_dev[EISA_MAX_FORCED_DEV];
40 static unsigned int disable_dev_count;
42 static int is_forced_dev(int *forced_tab,
43 int forced_count,
44 struct eisa_root_device *root,
45 struct eisa_device *edev)
47 int i, x;
49 for (i = 0; i < forced_count; i++) {
50 x = (root->bus_nr << 8) | edev->slot;
51 if (forced_tab[i] == x)
52 return 1;
55 return 0;
58 static void __init eisa_name_device(struct eisa_device *edev)
60 #ifdef CONFIG_EISA_NAMES
61 int i;
62 for (i = 0; i < EISA_INFOS; i++) {
63 if (!strcmp(edev->id.sig, eisa_table[i].id.sig)) {
64 strlcpy(edev->pretty_name,
65 eisa_table[i].name,
66 sizeof(edev->pretty_name));
67 return;
71 /* No name was found */
72 sprintf(edev->pretty_name, "EISA device %.7s", edev->id.sig);
73 #endif
76 static char __init *decode_eisa_sig(unsigned long addr)
78 static char sig_str[EISA_SIG_LEN];
79 u8 sig[4];
80 u16 rev;
81 int i;
83 for (i = 0; i < 4; i++) {
84 #ifdef CONFIG_EISA_VLB_PRIMING
86 * This ugly stuff is used to wake up VL-bus cards
87 * (AHA-284x is the only known example), so we can
88 * read the EISA id.
90 * Thankfully, this only exists on x86...
92 outb(0x80 + i, addr);
93 #endif
94 sig[i] = inb(addr + i);
96 if (!i && (sig[0] & 0x80))
97 return NULL;
100 sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
101 sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
102 sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
103 rev = (sig[2] << 8) | sig[3];
104 sprintf(sig_str + 3, "%04X", rev);
106 return sig_str;
109 static int eisa_bus_match(struct device *dev, struct device_driver *drv)
111 struct eisa_device *edev = to_eisa_device(dev);
112 struct eisa_driver *edrv = to_eisa_driver(drv);
113 const struct eisa_device_id *eids = edrv->id_table;
115 if (!eids)
116 return 0;
118 while (strlen(eids->sig)) {
119 if (!strcmp(eids->sig, edev->id.sig) &&
120 edev->state & EISA_CONFIG_ENABLED) {
121 edev->id.driver_data = eids->driver_data;
122 return 1;
125 eids++;
128 return 0;
131 static int eisa_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
133 struct eisa_device *edev = to_eisa_device(dev);
135 add_uevent_var(env, "MODALIAS=" EISA_DEVICE_MODALIAS_FMT, edev->id.sig);
136 return 0;
139 struct bus_type eisa_bus_type = {
140 .name = "eisa",
141 .match = eisa_bus_match,
142 .uevent = eisa_bus_uevent,
144 EXPORT_SYMBOL(eisa_bus_type);
146 int eisa_driver_register(struct eisa_driver *edrv)
148 edrv->driver.bus = &eisa_bus_type;
149 return driver_register(&edrv->driver);
151 EXPORT_SYMBOL(eisa_driver_register);
153 void eisa_driver_unregister(struct eisa_driver *edrv)
155 driver_unregister(&edrv->driver);
157 EXPORT_SYMBOL(eisa_driver_unregister);
159 static ssize_t eisa_show_sig(struct device *dev, struct device_attribute *attr,
160 char *buf)
162 struct eisa_device *edev = to_eisa_device(dev);
163 return sprintf(buf, "%s\n", edev->id.sig);
166 static DEVICE_ATTR(signature, S_IRUGO, eisa_show_sig, NULL);
168 static ssize_t eisa_show_state(struct device *dev,
169 struct device_attribute *attr,
170 char *buf)
172 struct eisa_device *edev = to_eisa_device(dev);
173 return sprintf(buf, "%d\n", edev->state & EISA_CONFIG_ENABLED);
176 static DEVICE_ATTR(enabled, S_IRUGO, eisa_show_state, NULL);
178 static ssize_t eisa_show_modalias(struct device *dev,
179 struct device_attribute *attr,
180 char *buf)
182 struct eisa_device *edev = to_eisa_device(dev);
183 return sprintf(buf, EISA_DEVICE_MODALIAS_FMT "\n", edev->id.sig);
186 static DEVICE_ATTR(modalias, S_IRUGO, eisa_show_modalias, NULL);
188 static int __init eisa_init_device(struct eisa_root_device *root,
189 struct eisa_device *edev,
190 int slot)
192 char *sig;
193 unsigned long sig_addr;
194 int i;
196 sig_addr = SLOT_ADDRESS(root, slot) + EISA_VENDOR_ID_OFFSET;
198 sig = decode_eisa_sig(sig_addr);
199 if (!sig)
200 return -1; /* No EISA device here */
202 memcpy(edev->id.sig, sig, EISA_SIG_LEN);
203 edev->slot = slot;
204 edev->state = inb(SLOT_ADDRESS(root, slot) + EISA_CONFIG_OFFSET)
205 & EISA_CONFIG_ENABLED;
206 edev->base_addr = SLOT_ADDRESS(root, slot);
207 edev->dma_mask = root->dma_mask; /* Default DMA mask */
208 eisa_name_device(edev);
209 edev->dev.parent = root->dev;
210 edev->dev.bus = &eisa_bus_type;
211 edev->dev.dma_mask = &edev->dma_mask;
212 edev->dev.coherent_dma_mask = edev->dma_mask;
213 dev_set_name(&edev->dev, "%02X:%02X", root->bus_nr, slot);
215 for (i = 0; i < EISA_MAX_RESOURCES; i++) {
216 #ifdef CONFIG_EISA_NAMES
217 edev->res[i].name = edev->pretty_name;
218 #else
219 edev->res[i].name = edev->id.sig;
220 #endif
223 if (is_forced_dev(enable_dev, enable_dev_count, root, edev))
224 edev->state = EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED;
226 if (is_forced_dev(disable_dev, disable_dev_count, root, edev))
227 edev->state = EISA_CONFIG_FORCED;
229 return 0;
232 static int __init eisa_register_device(struct eisa_device *edev)
234 int rc = device_register(&edev->dev);
235 if (rc)
236 return rc;
238 rc = device_create_file(&edev->dev, &dev_attr_signature);
239 if (rc)
240 goto err_devreg;
241 rc = device_create_file(&edev->dev, &dev_attr_enabled);
242 if (rc)
243 goto err_sig;
244 rc = device_create_file(&edev->dev, &dev_attr_modalias);
245 if (rc)
246 goto err_enab;
248 return 0;
250 err_enab:
251 device_remove_file(&edev->dev, &dev_attr_enabled);
252 err_sig:
253 device_remove_file(&edev->dev, &dev_attr_signature);
254 err_devreg:
255 device_unregister(&edev->dev);
256 return rc;
259 static int __init eisa_request_resources(struct eisa_root_device *root,
260 struct eisa_device *edev,
261 int slot)
263 int i;
265 for (i = 0; i < EISA_MAX_RESOURCES; i++) {
266 /* Don't register resource for slot 0, since this is
267 * very likely to fail... :-( Instead, grab the EISA
268 * id, now we can display something in /proc/ioports.
271 /* Only one region for mainboard */
272 if (!slot && i > 0) {
273 edev->res[i].start = edev->res[i].end = 0;
274 continue;
277 if (slot) {
278 edev->res[i].name = NULL;
279 edev->res[i].start = SLOT_ADDRESS(root, slot)
280 + (i * 0x400);
281 edev->res[i].end = edev->res[i].start + 0xff;
282 edev->res[i].flags = IORESOURCE_IO;
283 } else {
284 edev->res[i].name = NULL;
285 edev->res[i].start = SLOT_ADDRESS(root, slot)
286 + EISA_VENDOR_ID_OFFSET;
287 edev->res[i].end = edev->res[i].start + 3;
288 edev->res[i].flags = IORESOURCE_BUSY;
291 if (request_resource(root->res, &edev->res[i]))
292 goto failed;
295 return 0;
297 failed:
298 while (--i >= 0)
299 release_resource(&edev->res[i]);
301 return -1;
304 static void __init eisa_release_resources(struct eisa_device *edev)
306 int i;
308 for (i = 0; i < EISA_MAX_RESOURCES; i++)
309 if (edev->res[i].start || edev->res[i].end)
310 release_resource(&edev->res[i]);
313 static int __init eisa_probe(struct eisa_root_device *root)
315 int i, c;
316 struct eisa_device *edev;
318 printk(KERN_INFO "EISA: Probing bus %d at %s\n",
319 root->bus_nr, dev_name(root->dev));
321 /* First try to get hold of slot 0. If there is no device
322 * here, simply fail, unless root->force_probe is set. */
324 edev = kzalloc(sizeof(*edev), GFP_KERNEL);
325 if (!edev) {
326 printk(KERN_ERR "EISA: Couldn't allocate mainboard slot\n");
327 return -ENOMEM;
330 if (eisa_request_resources(root, edev, 0)) {
331 printk(KERN_WARNING \
332 "EISA: Cannot allocate resource for mainboard\n");
333 kfree(edev);
334 if (!root->force_probe)
335 return -EBUSY;
336 goto force_probe;
339 if (eisa_init_device(root, edev, 0)) {
340 eisa_release_resources(edev);
341 kfree(edev);
342 if (!root->force_probe)
343 return -ENODEV;
344 goto force_probe;
347 printk(KERN_INFO "EISA: Mainboard %s detected.\n", edev->id.sig);
349 if (eisa_register_device(edev)) {
350 printk(KERN_ERR "EISA: Failed to register %s\n",
351 edev->id.sig);
352 eisa_release_resources(edev);
353 kfree(edev);
356 force_probe:
358 for (c = 0, i = 1; i <= root->slots; i++) {
359 edev = kzalloc(sizeof(*edev), GFP_KERNEL);
360 if (!edev) {
361 printk(KERN_ERR "EISA: Out of memory for slot %d\n", i);
362 continue;
365 if (eisa_request_resources(root, edev, i)) {
366 printk(KERN_WARNING \
367 "Cannot allocate resource for EISA slot %d\n",
369 kfree(edev);
370 continue;
373 if (eisa_init_device(root, edev, i)) {
374 eisa_release_resources(edev);
375 kfree(edev);
376 continue;
379 printk(KERN_INFO "EISA: slot %d : %s detected",
380 i, edev->id.sig);
382 switch (edev->state) {
383 case EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED:
384 printk(" (forced enabled)");
385 break;
387 case EISA_CONFIG_FORCED:
388 printk(" (forced disabled)");
389 break;
391 case 0:
392 printk(" (disabled)");
393 break;
396 printk (".\n");
398 c++;
400 if (eisa_register_device(edev)) {
401 printk(KERN_ERR "EISA: Failed to register %s\n",
402 edev->id.sig);
403 eisa_release_resources(edev);
404 kfree(edev);
408 printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s");
410 return 0;
413 static struct resource eisa_root_res = {
414 .name = "EISA root resource",
415 .start = 0,
416 .end = 0xffffffff,
417 .flags = IORESOURCE_IO,
420 static int eisa_bus_count;
422 int __init eisa_root_register(struct eisa_root_device *root)
424 int err;
426 /* Use our own resources to check if this bus base address has
427 * been already registered. This prevents the virtual root
428 * device from registering after the real one has, for
429 * example... */
431 root->eisa_root_res.name = eisa_root_res.name;
432 root->eisa_root_res.start = root->res->start;
433 root->eisa_root_res.end = root->res->end;
434 root->eisa_root_res.flags = IORESOURCE_BUSY;
436 err = request_resource(&eisa_root_res, &root->eisa_root_res);
437 if (err)
438 return err;
440 root->bus_nr = eisa_bus_count++;
442 err = eisa_probe(root);
443 if (err)
444 release_resource(&root->eisa_root_res);
446 return err;
449 static int __init eisa_init(void)
451 int r;
453 r = bus_register(&eisa_bus_type);
454 if (r)
455 return r;
457 printk(KERN_INFO "EISA bus registered\n");
458 return 0;
461 module_param_array(enable_dev, int, &enable_dev_count, 0444);
462 module_param_array(disable_dev, int, &disable_dev_count, 0444);
464 postcore_initcall(eisa_init);
466 int EISA_bus; /* for legacy drivers */
467 EXPORT_SYMBOL(EISA_bus);