2 * linux/drivers/pcmcia/soc_common.h
4 * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
6 * This file contains definitions for the PCMCIA support code common to
7 * integrated SOCs like the SA-11x0 and PXA2xx microprocessors.
9 #ifndef _ASM_ARCH_PCMCIA
10 #define _ASM_ARCH_PCMCIA
12 /* include the world */
13 #include <linux/cpufreq.h>
14 #include <pcmcia/cs_types.h>
15 #include <pcmcia/cs.h>
16 #include <pcmcia/ss.h>
17 #include <pcmcia/bulkmem.h>
18 #include <pcmcia/cistpl.h>
19 #include "cs_internal.h"
23 struct pcmcia_low_level
;
26 * This structure encapsulates per-socket state which we might need to
27 * use when responding to a Card Services query of some kind.
29 struct soc_pcmcia_socket
{
30 struct pcmcia_socket socket
;
33 * Info from low level handler
42 struct pcmcia_low_level
*ops
;
45 socket_state_t cs_state
;
47 unsigned short spd_io
[MAX_IO_WIN
];
48 unsigned short spd_mem
[MAX_WIN
];
49 unsigned short spd_attr
[MAX_WIN
];
51 struct resource res_skt
;
52 struct resource res_io
;
53 struct resource res_mem
;
54 struct resource res_attr
;
55 void __iomem
*virt_io
;
57 unsigned int irq_state
;
59 struct timer_list poll_timer
;
60 struct list_head node
;
73 struct pcmcia_low_level
{
76 /* first socket in system */
81 int (*hw_init
)(struct soc_pcmcia_socket
*);
82 void (*hw_shutdown
)(struct soc_pcmcia_socket
*);
84 void (*socket_state
)(struct soc_pcmcia_socket
*, struct pcmcia_state
*);
85 int (*configure_socket
)(struct soc_pcmcia_socket
*, const socket_state_t
*);
88 * Enable card status IRQs on (re-)initialisation. This can
89 * be called at initialisation, power management event, or
92 void (*socket_init
)(struct soc_pcmcia_socket
*);
95 * Disable card status IRQs and PCMCIA bus on suspend.
97 void (*socket_suspend
)(struct soc_pcmcia_socket
*);
100 * Hardware specific timing routines.
101 * If provided, the get_timing routine overrides the SOC default.
103 unsigned int (*get_timing
)(struct soc_pcmcia_socket
*, unsigned int, unsigned int);
104 int (*set_timing
)(struct soc_pcmcia_socket
*);
105 int (*show_timing
)(struct soc_pcmcia_socket
*, char *);
107 #ifdef CONFIG_CPU_FREQ
111 int (*frequency_change
)(struct soc_pcmcia_socket
*, unsigned long, struct cpufreq_freqs
*);
122 struct soc_pcmcia_timing
{
128 extern int soc_pcmcia_request_irqs(struct soc_pcmcia_socket
*skt
, struct pcmcia_irqs
*irqs
, int nr
);
129 extern void soc_pcmcia_free_irqs(struct soc_pcmcia_socket
*skt
, struct pcmcia_irqs
*irqs
, int nr
);
130 extern void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket
*skt
, struct pcmcia_irqs
*irqs
, int nr
);
131 extern void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket
*skt
, struct pcmcia_irqs
*irqs
, int nr
);
132 extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket
*, struct soc_pcmcia_timing
*);
135 extern struct list_head soc_pcmcia_sockets
;
137 extern int soc_common_drv_pcmcia_probe(struct device
*dev
, struct pcmcia_low_level
*ops
, int first
, int nr
);
138 extern int soc_common_drv_pcmcia_remove(struct device
*dev
);
143 extern void soc_pcmcia_debug(struct soc_pcmcia_socket
*skt
, const char *func
,
144 int lvl
, const char *fmt
, ...);
146 #define debug(skt, lvl, fmt, arg...) \
147 soc_pcmcia_debug(skt, __func__, lvl, fmt , ## arg)
150 #define debug(skt, lvl, fmt, arg...) do { } while (0)
155 * The PC Card Standard, Release 7, section 4.13.4, says that twIORD
156 * has a minimum value of 165ns. Section 4.13.5 says that twIOWR has
157 * a minimum value of 165ns, as well. Section 4.7.2 (describing
158 * common and attribute memory write timing) says that twWE has a
159 * minimum value of 150ns for a 250ns cycle time (for 5V operation;
160 * see section 4.7.4), or 300ns for a 600ns cycle time (for 3.3V
161 * operation, also section 4.7.4). Section 4.7.3 says that taOE
162 * has a maximum value of 150ns for a 300ns cycle time (for 5V
163 * operation), or 300ns for a 600ns cycle time (for 3.3V operation).
165 * When configuring memory maps, Card Services appears to adopt the policy
166 * that a memory access time of "0" means "use the default." The default
167 * PCMCIA I/O command width time is 165ns. The default PCMCIA 5V attribute
168 * and memory command width time is 150ns; the PCMCIA 3.3V attribute and
169 * memory command width time is 300ns.
171 #define SOC_PCMCIA_IO_ACCESS (165)
172 #define SOC_PCMCIA_5V_MEM_ACCESS (150)
173 #define SOC_PCMCIA_3V_MEM_ACCESS (300)
174 #define SOC_PCMCIA_ATTR_MEM_ACCESS (300)
177 * The socket driver actually works nicely in interrupt-driven form,
178 * so the (relatively infrequent) polling is "just to be sure."
180 #define SOC_PCMCIA_POLL_PERIOD (2*HZ)
183 /* I/O pins replacing memory pins
184 * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75)
186 * These signals change meaning when going from memory-only to
187 * memory-or-I/O interface:
189 #define iostschg bvd1