ACPI: thinkpad-acpi: trivial fix to documentation
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / include / asm-i386 / pgtable-3level.h
blob948a334141184f09e486baa971ed321cb6727f6f
1 #ifndef _I386_PGTABLE_3LEVEL_H
2 #define _I386_PGTABLE_3LEVEL_H
4 /*
5 * Intel Physical Address Extension (PAE) Mode - three-level page
6 * tables on PPro+ CPUs.
8 * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
9 */
11 #define pte_ERROR(e) \
12 printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
13 #define pmd_ERROR(e) \
14 printk("%s:%d: bad pmd %p(%016Lx).\n", __FILE__, __LINE__, &(e), pmd_val(e))
15 #define pgd_ERROR(e) \
16 printk("%s:%d: bad pgd %p(%016Lx).\n", __FILE__, __LINE__, &(e), pgd_val(e))
18 #define pud_none(pud) 0
19 #define pud_bad(pud) 0
20 #define pud_present(pud) 1
23 * All present pages with !NX bit are kernel-executable:
25 static inline int pte_exec_kernel(pte_t pte)
27 return !(pte_val(pte) & _PAGE_NX);
30 /* Rules for using set_pte: the pte being assigned *must* be
31 * either not present or in a state where the hardware will
32 * not attempt to update the pte. In places where this is
33 * not possible, use pte_get_and_clear to obtain the old pte
34 * value and then use set_pte to update it. -ben
36 static inline void native_set_pte(pte_t *ptep, pte_t pte)
38 ptep->pte_high = pte.pte_high;
39 smp_wmb();
40 ptep->pte_low = pte.pte_low;
42 static inline void native_set_pte_at(struct mm_struct *mm, unsigned long addr,
43 pte_t *ptep , pte_t pte)
45 native_set_pte(ptep, pte);
49 * Since this is only called on user PTEs, and the page fault handler
50 * must handle the already racy situation of simultaneous page faults,
51 * we are justified in merely clearing the PTE present bit, followed
52 * by a set. The ordering here is important.
54 static inline void native_set_pte_present(struct mm_struct *mm, unsigned long addr,
55 pte_t *ptep, pte_t pte)
57 ptep->pte_low = 0;
58 smp_wmb();
59 ptep->pte_high = pte.pte_high;
60 smp_wmb();
61 ptep->pte_low = pte.pte_low;
64 static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
66 set_64bit((unsigned long long *)(ptep),native_pte_val(pte));
68 static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
70 set_64bit((unsigned long long *)(pmdp),native_pmd_val(pmd));
72 static inline void native_set_pud(pud_t *pudp, pud_t pud)
74 *pudp = pud;
78 * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
79 * entry, so clear the bottom half first and enforce ordering with a compiler
80 * barrier.
82 static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
84 ptep->pte_low = 0;
85 smp_wmb();
86 ptep->pte_high = 0;
89 static inline void native_pmd_clear(pmd_t *pmd)
91 u32 *tmp = (u32 *)pmd;
92 *tmp = 0;
93 smp_wmb();
94 *(tmp + 1) = 0;
97 #ifndef CONFIG_PARAVIRT
98 #define set_pte(ptep, pte) native_set_pte(ptep, pte)
99 #define set_pte_at(mm, addr, ptep, pte) native_set_pte_at(mm, addr, ptep, pte)
100 #define set_pte_present(mm, addr, ptep, pte) native_set_pte_present(mm, addr, ptep, pte)
101 #define set_pte_atomic(ptep, pte) native_set_pte_atomic(ptep, pte)
102 #define set_pmd(pmdp, pmd) native_set_pmd(pmdp, pmd)
103 #define set_pud(pudp, pud) native_set_pud(pudp, pud)
104 #define pte_clear(mm, addr, ptep) native_pte_clear(mm, addr, ptep)
105 #define pmd_clear(pmd) native_pmd_clear(pmd)
106 #endif
109 * Pentium-II erratum A13: in PAE mode we explicitly have to flush
110 * the TLB via cr3 if the top-level pgd is changed...
111 * We do not let the generic code free and clear pgd entries due to
112 * this erratum.
114 static inline void pud_clear (pud_t * pud) { }
116 #define pud_page(pud) \
117 ((struct page *) __va(pud_val(pud) & PAGE_MASK))
119 #define pud_page_vaddr(pud) \
120 ((unsigned long) __va(pud_val(pud) & PAGE_MASK))
123 /* Find an entry in the second-level page table.. */
124 #define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \
125 pmd_index(address))
127 #ifdef CONFIG_SMP
128 static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
130 pte_t res;
132 /* xchg acts as a barrier before the setting of the high bits */
133 res.pte_low = xchg(&ptep->pte_low, 0);
134 res.pte_high = ptep->pte_high;
135 ptep->pte_high = 0;
137 return res;
139 #else
140 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
141 #endif
143 #define __HAVE_ARCH_PTE_SAME
144 static inline int pte_same(pte_t a, pte_t b)
146 return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
149 #define pte_page(x) pfn_to_page(pte_pfn(x))
151 static inline int pte_none(pte_t pte)
153 return !pte.pte_low && !pte.pte_high;
156 static inline unsigned long pte_pfn(pte_t pte)
158 return pte_val(pte) >> PAGE_SHIFT;
161 extern unsigned long long __supported_pte_mask;
163 static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
165 return __pte((((unsigned long long)page_nr << PAGE_SHIFT) |
166 pgprot_val(pgprot)) & __supported_pte_mask);
169 static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
171 return __pmd((((unsigned long long)page_nr << PAGE_SHIFT) |
172 pgprot_val(pgprot)) & __supported_pte_mask);
176 * Bits 0, 6 and 7 are taken in the low part of the pte,
177 * put the 32 bits of offset into the high part.
179 #define pte_to_pgoff(pte) ((pte).pte_high)
180 #define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) })
181 #define PTE_FILE_MAX_BITS 32
183 /* Encode and de-code a swap entry */
184 #define __swp_type(x) (((x).val) & 0x1f)
185 #define __swp_offset(x) ((x).val >> 5)
186 #define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) << 5})
187 #define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
188 #define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val })
190 #define __pmd_free_tlb(tlb, x) do { } while (0)
192 #endif /* _I386_PGTABLE_3LEVEL_H */