x86, amd: Check X86_FEATURE_OSVW bit before accessing OSVW MSRs
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / ide / ns87415.c
blob95327a2c2422a5c7e86c3bbe9d93a26d38547de7
1 /*
2 * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
3 * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
4 * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
7 * Inspired by an earlier effort from David S. Miller <davem@redhat.com>
8 */
10 #include <linux/module.h>
11 #include <linux/types.h>
12 #include <linux/kernel.h>
13 #include <linux/interrupt.h>
14 #include <linux/pci.h>
15 #include <linux/delay.h>
16 #include <linux/ide.h>
17 #include <linux/init.h>
19 #include <asm/io.h>
21 #define DRV_NAME "ns87415"
23 #ifdef CONFIG_SUPERIO
24 /* SUPERIO 87560 is a PoS chip that NatSem denies exists.
25 * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
26 * which use the integrated NS87514 cell for CD-ROM support.
27 * i.e we have to support for CD-ROM installs.
28 * See drivers/parisc/superio.c for more gory details.
30 #include <asm/superio.h>
32 #define SUPERIO_IDE_MAX_RETRIES 25
34 /* Because of a defect in Super I/O, all reads of the PCI DMA status
35 * registers, IDE status register and the IDE select register need to be
36 * retried
38 static u8 superio_ide_inb (unsigned long port)
40 u8 tmp;
41 int retries = SUPERIO_IDE_MAX_RETRIES;
43 /* printk(" [ reading port 0x%x with retry ] ", port); */
45 do {
46 tmp = inb(port);
47 if (tmp == 0)
48 udelay(50);
49 } while (tmp == 0 && retries-- > 0);
51 return tmp;
54 static u8 superio_read_status(ide_hwif_t *hwif)
56 return superio_ide_inb(hwif->io_ports.status_addr);
59 static u8 superio_dma_sff_read_status(ide_hwif_t *hwif)
61 return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
64 static void superio_tf_read(ide_drive_t *drive, struct ide_taskfile *tf,
65 u8 valid)
67 struct ide_io_ports *io_ports = &drive->hwif->io_ports;
69 if (valid & IDE_VALID_ERROR)
70 tf->error = inb(io_ports->feature_addr);
71 if (valid & IDE_VALID_NSECT)
72 tf->nsect = inb(io_ports->nsect_addr);
73 if (valid & IDE_VALID_LBAL)
74 tf->lbal = inb(io_ports->lbal_addr);
75 if (valid & IDE_VALID_LBAM)
76 tf->lbam = inb(io_ports->lbam_addr);
77 if (valid & IDE_VALID_LBAH)
78 tf->lbah = inb(io_ports->lbah_addr);
79 if (valid & IDE_VALID_DEVICE)
80 tf->device = superio_ide_inb(io_ports->device_addr);
83 static void ns87415_dev_select(ide_drive_t *drive);
85 static const struct ide_tp_ops superio_tp_ops = {
86 .exec_command = ide_exec_command,
87 .read_status = superio_read_status,
88 .read_altstatus = ide_read_altstatus,
89 .write_devctl = ide_write_devctl,
91 .dev_select = ns87415_dev_select,
92 .tf_load = ide_tf_load,
93 .tf_read = superio_tf_read,
95 .input_data = ide_input_data,
96 .output_data = ide_output_data,
99 static void __devinit superio_init_iops(struct hwif_s *hwif)
101 struct pci_dev *pdev = to_pci_dev(hwif->dev);
102 u32 dma_stat;
103 u8 port = hwif->channel, tmp;
105 dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
107 /* Clear error/interrupt, enable dma */
108 tmp = superio_ide_inb(dma_stat);
109 outb(tmp | 0x66, dma_stat);
111 #else
112 #define superio_dma_sff_read_status ide_dma_sff_read_status
113 #endif
115 static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
118 * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
119 * the IRQ associated with the port,
120 * and selects either PIO or DMA handshaking for the next I/O operation.
122 static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
124 ide_hwif_t *hwif = drive->hwif;
125 struct pci_dev *dev = to_pci_dev(hwif->dev);
126 unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
127 unsigned long flags;
129 local_irq_save(flags);
130 new = *old;
132 /* Adjust IRQ enable bit */
133 bit = 1 << (8 + hwif->channel);
135 if (drive->dev_flags & IDE_DFLAG_PRESENT)
136 new &= ~bit;
137 else
138 new |= bit;
140 /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
141 bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
142 other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
143 new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
145 if (new != *old) {
146 unsigned char stat;
149 * Don't change DMA engine settings while Write Buffers
150 * are busy.
152 (void) pci_read_config_byte(dev, 0x43, &stat);
153 while (stat & 0x03) {
154 udelay(1);
155 (void) pci_read_config_byte(dev, 0x43, &stat);
158 *old = new;
159 (void) pci_write_config_dword(dev, 0x40, new);
162 * And let things settle...
164 udelay(10);
167 local_irq_restore(flags);
170 static void ns87415_dev_select(ide_drive_t *drive)
172 ns87415_prepare_drive(drive,
173 !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
175 outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
178 static void ns87415_dma_start(ide_drive_t *drive)
180 ns87415_prepare_drive(drive, 1);
181 ide_dma_start(drive);
184 static int ns87415_dma_end(ide_drive_t *drive)
186 ide_hwif_t *hwif = drive->hwif;
187 u8 dma_stat = 0, dma_cmd = 0;
189 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
190 /* get DMA command mode */
191 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
192 /* stop DMA */
193 outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
194 /* from ERRATA: clear the INTR & ERROR bits */
195 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
196 outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD);
198 ns87415_prepare_drive(drive, 0);
200 /* verify good DMA status */
201 return (dma_stat & 7) != 4;
204 static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
206 struct pci_dev *dev = to_pci_dev(hwif->dev);
207 unsigned int ctrl, using_inta;
208 u8 progif;
209 #ifdef __sparc_v9__
210 int timeout;
211 u8 stat;
212 #endif
215 * We cannot probe for IRQ: both ports share common IRQ on INTA.
216 * Also, leave IRQ masked during drive probing, to prevent infinite
217 * interrupts from a potentially floating INTA..
219 * IRQs get unmasked in dev_select() when drive is first used.
221 (void) pci_read_config_dword(dev, 0x40, &ctrl);
222 (void) pci_read_config_byte(dev, 0x09, &progif);
223 /* is irq in "native" mode? */
224 using_inta = progif & (1 << (hwif->channel << 1));
225 if (!using_inta)
226 using_inta = ctrl & (1 << (4 + hwif->channel));
227 if (hwif->mate) {
228 hwif->select_data = hwif->mate->select_data;
229 } else {
230 hwif->select_data = (unsigned long)
231 &ns87415_control[ns87415_count++];
232 ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
233 if (using_inta)
234 ctrl &= ~(1 << 6); /* unmask INTA */
235 *((unsigned int *)hwif->select_data) = ctrl;
236 (void) pci_write_config_dword(dev, 0x40, ctrl);
239 * Set prefetch size to 512 bytes for both ports,
240 * but don't turn on/off prefetching here.
242 pci_write_config_byte(dev, 0x55, 0xee);
244 #ifdef __sparc_v9__
246 * XXX: Reset the device, if we don't it will not respond to
247 * dev_select() properly during first ide_probe_port().
249 timeout = 10000;
250 outb(12, hwif->io_ports.ctl_addr);
251 udelay(10);
252 outb(8, hwif->io_ports.ctl_addr);
253 do {
254 udelay(50);
255 stat = hwif->tp_ops->read_status(hwif);
256 if (stat == 0xff)
257 break;
258 } while ((stat & ATA_BUSY) && --timeout);
259 #endif
262 if (!using_inta)
263 hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
265 if (!hwif->dma_base)
266 return;
268 outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
271 static const struct ide_tp_ops ns87415_tp_ops = {
272 .exec_command = ide_exec_command,
273 .read_status = ide_read_status,
274 .read_altstatus = ide_read_altstatus,
275 .write_devctl = ide_write_devctl,
277 .dev_select = ns87415_dev_select,
278 .tf_load = ide_tf_load,
279 .tf_read = ide_tf_read,
281 .input_data = ide_input_data,
282 .output_data = ide_output_data,
285 static const struct ide_dma_ops ns87415_dma_ops = {
286 .dma_host_set = ide_dma_host_set,
287 .dma_setup = ide_dma_setup,
288 .dma_start = ns87415_dma_start,
289 .dma_end = ns87415_dma_end,
290 .dma_test_irq = ide_dma_test_irq,
291 .dma_lost_irq = ide_dma_lost_irq,
292 .dma_timer_expiry = ide_dma_sff_timer_expiry,
293 .dma_sff_read_status = superio_dma_sff_read_status,
296 static const struct ide_port_info ns87415_chipset __devinitdata = {
297 .name = DRV_NAME,
298 .init_hwif = init_hwif_ns87415,
299 .tp_ops = &ns87415_tp_ops,
300 .dma_ops = &ns87415_dma_ops,
301 .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
302 IDE_HFLAG_NO_ATAPI_DMA,
305 static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
307 struct ide_port_info d = ns87415_chipset;
309 #ifdef CONFIG_SUPERIO
310 if (PCI_SLOT(dev->devfn) == 0xE) {
311 /* Built-in - assume it's under superio. */
312 d.init_iops = superio_init_iops;
313 d.tp_ops = &superio_tp_ops;
315 #endif
316 return ide_pci_init_one(dev, &d, NULL);
319 static const struct pci_device_id ns87415_pci_tbl[] = {
320 { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), 0 },
321 { 0, },
323 MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
325 static struct pci_driver ns87415_pci_driver = {
326 .name = "NS87415_IDE",
327 .id_table = ns87415_pci_tbl,
328 .probe = ns87415_init_one,
329 .remove = ide_pci_remove,
330 .suspend = ide_pci_suspend,
331 .resume = ide_pci_resume,
334 static int __init ns87415_ide_init(void)
336 return ide_pci_register_driver(&ns87415_pci_driver);
339 static void __exit ns87415_ide_exit(void)
341 pci_unregister_driver(&ns87415_pci_driver);
344 module_init(ns87415_ide_init);
345 module_exit(ns87415_ide_exit);
347 MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
348 MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
349 MODULE_LICENSE("GPL");