?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi...
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / usb / dwc3 / gadget.c
blob4c6bedad51fd5b23fd86bc24db6b7045a1e04e78
1 /**
2 * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
3 *
4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
5 *
6 * Authors: Felipe Balbi <balbi@ti.com>,
7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions, and the following disclaimer,
14 * without modification.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. The names of the above-listed copyright holders may not be used
19 * to endorse or promote products derived from this software without
20 * specific prior written permission.
21 *
22 * ALTERNATIVELY, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2, as published by the Free
24 * Software Foundation.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
27 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
28 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
30 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
31 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
32 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
33 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
34 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
35 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
36 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37 */
38
39 #include <linux/kernel.h>
40 #include <linux/delay.h>
41 #include <linux/slab.h>
42 #include <linux/spinlock.h>
43 #include <linux/platform_device.h>
44 #include <linux/pm_runtime.h>
45 #include <linux/interrupt.h>
46 #include <linux/io.h>
47 #include <linux/list.h>
48 #include <linux/dma-mapping.h>
49
50 #include <linux/usb/ch9.h>
51 #include <linux/usb/gadget.h>
52
53 #include "core.h"
54 #include "gadget.h"
55 #include "io.h"
56
57 #define DMA_ADDR_INVALID (~(dma_addr_t)0)
58
59 void dwc3_map_buffer_to_dma(struct dwc3_request *req)
60 {
61 struct dwc3 *dwc = req->dep->dwc;
62
63 if (req->request.length == 0) {
64 /* req->request.dma = dwc->setup_buf_addr; */
65 return;
66 }
67
68 if (req->request.num_sgs) {
69 int mapped;
70
71 mapped = dma_map_sg(dwc->dev, req->request.sg,
72 req->request.num_sgs,
73 req->direction ? DMA_TO_DEVICE
74 : DMA_FROM_DEVICE);
75 if (mapped < 0) {
76 dev_err(dwc->dev, "failed to map SGs\n");
77 return;
78 }
79
80 req->request.num_mapped_sgs = mapped;
81 return;
82 }
83
84 if (req->request.dma == DMA_ADDR_INVALID) {
85 req->request.dma = dma_map_single(dwc->dev, req->request.buf,
86 req->request.length, req->direction
87 ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
88 req->mapped = true;
89 }
90 }
91
92 void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
93 {
94 struct dwc3 *dwc = req->dep->dwc;
95
96 if (req->request.length == 0) {
97 req->request.dma = DMA_ADDR_INVALID;
98 return;
99 }
100
101 if (req->request.num_mapped_sgs) {
102 req->request.dma = DMA_ADDR_INVALID;
103 dma_unmap_sg(dwc->dev, req->request.sg,
104 req->request.num_sgs,
105 req->direction ? DMA_TO_DEVICE
106 : DMA_FROM_DEVICE);
107
108 req->request.num_mapped_sgs = 0;
109 return;
110 }
111
112 if (req->mapped) {
113 dma_unmap_single(dwc->dev, req->request.dma,
114 req->request.length, req->direction
115 ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
116 req->mapped = 0;
117 req->request.dma = DMA_ADDR_INVALID;
118 }
119 }
120
121 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
122 int status)
123 {
124 struct dwc3 *dwc = dep->dwc;
125
126 if (req->queued) {
127 if (req->request.num_mapped_sgs)
128 dep->busy_slot += req->request.num_mapped_sgs;
129 else
130 dep->busy_slot++;
131
132 /*
133 * Skip LINK TRB. We can't use req->trb and check for
134 * DWC3_TRBCTL_LINK_TRB because it points the TRB we just
135 * completed (not the LINK TRB).
136 */
137 if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
138 usb_endpoint_xfer_isoc(dep->desc))
139 dep->busy_slot++;
140 }
141 list_del(&req->list);
142 req->trb = NULL;
143
144 if (req->request.status == -EINPROGRESS)
145 req->request.status = status;
146
147 dwc3_unmap_buffer_from_dma(req);
148
149 dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
150 req, dep->name, req->request.actual,
151 req->request.length, status);
152
153 spin_unlock(&dwc->lock);
154 req->request.complete(&req->dep->endpoint, &req->request);
155 spin_lock(&dwc->lock);
156 }
157
158 static const char *dwc3_gadget_ep_cmd_string(u8 cmd)
159 {
160 switch (cmd) {
161 case DWC3_DEPCMD_DEPSTARTCFG:
162 return "Start New Configuration";
163 case DWC3_DEPCMD_ENDTRANSFER:
164 return "End Transfer";
165 case DWC3_DEPCMD_UPDATETRANSFER:
166 return "Update Transfer";
167 case DWC3_DEPCMD_STARTTRANSFER:
168 return "Start Transfer";
169 case DWC3_DEPCMD_CLEARSTALL:
170 return "Clear Stall";
171 case DWC3_DEPCMD_SETSTALL:
172 return "Set Stall";
173 case DWC3_DEPCMD_GETSEQNUMBER:
174 return "Get Data Sequence Number";
175 case DWC3_DEPCMD_SETTRANSFRESOURCE:
176 return "Set Endpoint Transfer Resource";
177 case DWC3_DEPCMD_SETEPCONFIG:
178 return "Set Endpoint Configuration";
179 default:
180 return "UNKNOWN command";
181 }
182 }
183
184 int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
185 unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
186 {
187 struct dwc3_ep *dep = dwc->eps[ep];
188 u32 timeout = 500;
189 u32 reg;
190
191 dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n",
192 dep->name,
193 dwc3_gadget_ep_cmd_string(cmd), params->param0,
194 params->param1, params->param2);
195
196 dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
197 dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
198 dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
199
200 dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
201 do {
202 reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
203 if (!(reg & DWC3_DEPCMD_CMDACT)) {
204 dev_vdbg(dwc->dev, "Command Complete --> %d\n",
205 DWC3_DEPCMD_STATUS(reg));
206 return 0;
207 }
208
209 /*
210 * We can't sleep here, because it is also called from
211 * interrupt context.
212 */
213 timeout--;
214 if (!timeout)
215 return -ETIMEDOUT;
216
217 udelay(1);
218 } while (1);
219 }
220
221 static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
222 struct dwc3_trb_hw *trb)
223 {
224 u32 offset = (char *) trb - (char *) dep->trb_pool;
225
226 return dep->trb_pool_dma + offset;
227 }
228
229 static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
230 {
231 struct dwc3 *dwc = dep->dwc;
232
233 if (dep->trb_pool)
234 return 0;
235
236 if (dep->number == 0 || dep->number == 1)
237 return 0;
238
239 dep->trb_pool = dma_alloc_coherent(dwc->dev,
240 sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
241 &dep->trb_pool_dma, GFP_KERNEL);
242 if (!dep->trb_pool) {
243 dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
244 dep->name);
245 return -ENOMEM;
246 }
247
248 return 0;
249 }
250
251 static void dwc3_free_trb_pool(struct dwc3_ep *dep)
252 {
253 struct dwc3 *dwc = dep->dwc;
254
255 dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
256 dep->trb_pool, dep->trb_pool_dma);
257
258 dep->trb_pool = NULL;
259 dep->trb_pool_dma = 0;
260 }
261
262 static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
263 {
264 struct dwc3_gadget_ep_cmd_params params;
265 u32 cmd;
266
267 memset(&params, 0x00, sizeof(params));
268
269 if (dep->number != 1) {
270 cmd = DWC3_DEPCMD_DEPSTARTCFG;
271 /* XferRscIdx == 0 for ep0 and 2 for the remaining */
272 if (dep->number > 1) {
273 if (dwc->start_config_issued)
274 return 0;
275 dwc->start_config_issued = true;
276 cmd |= DWC3_DEPCMD_PARAM(2);
277 }
278
279 return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
280 }
281
282 return 0;
283 }
284
285 static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
286 const struct usb_endpoint_descriptor *desc,
287 const struct usb_ss_ep_comp_descriptor *comp_desc)
288 {
289 struct dwc3_gadget_ep_cmd_params params;
290
291 memset(&params, 0x00, sizeof(params));
292
293 params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
294 | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc))
295 | DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst);
296
297 params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
298 | DWC3_DEPCFG_XFER_NOT_READY_EN;
299
300 if (comp_desc && USB_SS_MAX_STREAMS(comp_desc->bmAttributes)
301 && usb_endpoint_xfer_bulk(desc)) {
302 params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
303 | DWC3_DEPCFG_STREAM_EVENT_EN;
304 dep->stream_capable = true;
305 }
306
307 if (usb_endpoint_xfer_isoc(desc))
308 params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
309
310 /*
311 * We are doing 1:1 mapping for endpoints, meaning
312 * Physical Endpoints 2 maps to Logical Endpoint 2 and
313 * so on. We consider the direction bit as part of the physical
314 * endpoint number. So USB endpoint 0x81 is 0x03.
315 */
316 params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
317
318 /*
319 * We must use the lower 16 TX FIFOs even though
320 * HW might have more
321 */
322 if (dep->direction)
323 params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
324
325 if (desc->bInterval) {
326 params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1);
327 dep->interval = 1 << (desc->bInterval - 1);
328 }
329
330 return dwc3_send_gadget_ep_cmd(dwc, dep->number,
331 DWC3_DEPCMD_SETEPCONFIG, &params);
332 }
333
334 static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
335 {
336 struct dwc3_gadget_ep_cmd_params params;
337
338 memset(&params, 0x00, sizeof(params));
339
340 params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
341
342 return dwc3_send_gadget_ep_cmd(dwc, dep->number,
343 DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
344 }
345
346 /**
347 * __dwc3_gadget_ep_enable - Initializes a HW endpoint
348 * @dep: endpoint to be initialized
349 * @desc: USB Endpoint Descriptor
350 *
351 * Caller should take care of locking
352 */
353 static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
354 const struct usb_endpoint_descriptor *desc,
355 const struct usb_ss_ep_comp_descriptor *comp_desc)
356 {
357 struct dwc3 *dwc = dep->dwc;
358 u32 reg;
359 int ret = -ENOMEM;
360
361 if (!(dep->flags & DWC3_EP_ENABLED)) {
362 ret = dwc3_gadget_start_config(dwc, dep);
363 if (ret)
364 return ret;
365 }
366
367 ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc);
368 if (ret)
369 return ret;
370
371 if (!(dep->flags & DWC3_EP_ENABLED)) {
372 struct dwc3_trb_hw *trb_st_hw;
373 struct dwc3_trb_hw *trb_link_hw;
374 struct dwc3_trb trb_link;
375
376 ret = dwc3_gadget_set_xfer_resource(dwc, dep);
377 if (ret)
378 return ret;
379
380 dep->desc = desc;
381 dep->comp_desc = comp_desc;
382 dep->type = usb_endpoint_type(desc);
383 dep->flags |= DWC3_EP_ENABLED;
384
385 reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
386 reg |= DWC3_DALEPENA_EP(dep->number);
387 dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
388
389 if (!usb_endpoint_xfer_isoc(desc))
390 return 0;
391
392 memset(&trb_link, 0, sizeof(trb_link));
393
394 /* Link TRB for ISOC. The HWO but is never reset */
395 trb_st_hw = &dep->trb_pool[0];
396
397 trb_link.bplh = dwc3_trb_dma_offset(dep, trb_st_hw);
398 trb_link.trbctl = DWC3_TRBCTL_LINK_TRB;
399 trb_link.hwo = true;
400
401 trb_link_hw = &dep->trb_pool[DWC3_TRB_NUM - 1];
402 dwc3_trb_to_hw(&trb_link, trb_link_hw);
403 }
404
405 return 0;
406 }
407
408 static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
409 static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
410 {
411 struct dwc3_request *req;
412
413 if (!list_empty(&dep->req_queued))
414 dwc3_stop_active_transfer(dwc, dep->number);
415
416 while (!list_empty(&dep->request_list)) {
417 req = next_request(&dep->request_list);
418
419 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
420 }
421 }
422
423 /**
424 * __dwc3_gadget_ep_disable - Disables a HW endpoint
425 * @dep: the endpoint to disable
426 *
427 * This function also removes requests which are currently processed ny the
428 * hardware and those which are not yet scheduled.
429 * Caller should take care of locking.
430 */
431 static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
432 {
433 struct dwc3 *dwc = dep->dwc;
434 u32 reg;
435
436 dwc3_remove_requests(dwc, dep);
437
438 reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
439 reg &= ~DWC3_DALEPENA_EP(dep->number);
440 dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
441
442 dep->stream_capable = false;
443 dep->desc = NULL;
444 dep->comp_desc = NULL;
445 dep->type = 0;
446 dep->flags = 0;
447
448 return 0;
449 }
450
451 /* -------------------------------------------------------------------------- */
452
453 static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
454 const struct usb_endpoint_descriptor *desc)
455 {
456 return -EINVAL;
457 }
458
459 static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
460 {
461 return -EINVAL;
462 }
463
464 /* -------------------------------------------------------------------------- */
465
466 static int dwc3_gadget_ep_enable(struct usb_ep *ep,
467 const struct usb_endpoint_descriptor *desc)
468 {
469 struct dwc3_ep *dep;
470 struct dwc3 *dwc;
471 unsigned long flags;
472 int ret;
473
474 if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
475 pr_debug("dwc3: invalid parameters\n");
476 return -EINVAL;
477 }
478
479 if (!desc->wMaxPacketSize) {
480 pr_debug("dwc3: missing wMaxPacketSize\n");
481 return -EINVAL;
482 }
483
484 dep = to_dwc3_ep(ep);
485 dwc = dep->dwc;
486
487 switch (usb_endpoint_type(desc)) {
488 case USB_ENDPOINT_XFER_CONTROL:
489 strncat(dep->name, "-control", sizeof(dep->name));
490 break;
491 case USB_ENDPOINT_XFER_ISOC:
492 strncat(dep->name, "-isoc", sizeof(dep->name));
493 break;
494 case USB_ENDPOINT_XFER_BULK:
495 strncat(dep->name, "-bulk", sizeof(dep->name));
496 break;
497 case USB_ENDPOINT_XFER_INT:
498 strncat(dep->name, "-int", sizeof(dep->name));
499 break;
500 default:
501 dev_err(dwc->dev, "invalid endpoint transfer type\n");
502 }
503
504 if (dep->flags & DWC3_EP_ENABLED) {
505 dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n",
506 dep->name);
507 return 0;
508 }
509
510 dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
511
512 spin_lock_irqsave(&dwc->lock, flags);
513 ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc);
514 spin_unlock_irqrestore(&dwc->lock, flags);
515
516 return ret;
517 }
518
519 static int dwc3_gadget_ep_disable(struct usb_ep *ep)
520 {
521 struct dwc3_ep *dep;
522 struct dwc3 *dwc;
523 unsigned long flags;
524 int ret;
525
526 if (!ep) {
527 pr_debug("dwc3: invalid parameters\n");
528 return -EINVAL;
529 }
530
531 dep = to_dwc3_ep(ep);
532 dwc = dep->dwc;
533
534 if (!(dep->flags & DWC3_EP_ENABLED)) {
535 dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n",
536 dep->name);
537 return 0;
538 }
539
540 snprintf(dep->name, sizeof(dep->name), "ep%d%s",
541 dep->number >> 1,
542 (dep->number & 1) ? "in" : "out");
543
544 spin_lock_irqsave(&dwc->lock, flags);
545 ret = __dwc3_gadget_ep_disable(dep);
546 spin_unlock_irqrestore(&dwc->lock, flags);
547
548 return ret;
549 }
550
551 static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
552 gfp_t gfp_flags)
553 {
554 struct dwc3_request *req;
555 struct dwc3_ep *dep = to_dwc3_ep(ep);
556 struct dwc3 *dwc = dep->dwc;
557
558 req = kzalloc(sizeof(*req), gfp_flags);
559 if (!req) {
560 dev_err(dwc->dev, "not enough memory\n");
561 return NULL;
562 }
563
564 req->epnum = dep->number;
565 req->dep = dep;
566 req->request.dma = DMA_ADDR_INVALID;
567
568 return &req->request;
569 }
570
571 static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
572 struct usb_request *request)
573 {
574 struct dwc3_request *req = to_dwc3_request(request);
575
576 kfree(req);
577 }
578
579 /**
580 * dwc3_prepare_one_trb - setup one TRB from one request
581 * @dep: endpoint for which this request is prepared
582 * @req: dwc3_request pointer
583 */
584 static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
585 struct dwc3_request *req, dma_addr_t dma,
586 unsigned length, unsigned last, unsigned chain)
587 {
588 struct dwc3 *dwc = dep->dwc;
589 struct dwc3_trb_hw *trb_hw;
590 struct dwc3_trb trb;
591
592 unsigned int cur_slot;
593
594 dev_vdbg(dwc->dev, "%s: req %p dma %08llx length %d%s%s\n",
595 dep->name, req, (unsigned long long) dma,
596 length, last ? " last" : "",
597 chain ? " chain" : "");
598
599 trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
600 cur_slot = dep->free_slot;
601 dep->free_slot++;
602
603 /* Skip the LINK-TRB on ISOC */
604 if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
605 usb_endpoint_xfer_isoc(dep->desc))
606 return;
607
608 memset(&trb, 0, sizeof(trb));
609 if (!req->trb) {
610 dwc3_gadget_move_request_queued(req);
611 req->trb = trb_hw;
612 req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
613 }
614
615 if (usb_endpoint_xfer_isoc(dep->desc)) {
616 trb.isp_imi = true;
617 trb.csp = true;
618 } else {
619 trb.chn = chain;
620 trb.lst = last;
621 }
622
623 if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
624 trb.sid_sofn = req->request.stream_id;
625
626 switch (usb_endpoint_type(dep->desc)) {
627 case USB_ENDPOINT_XFER_CONTROL:
628 trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
629 break;
630
631 case USB_ENDPOINT_XFER_ISOC:
632 trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
633
634 /* IOC every DWC3_TRB_NUM / 4 so we can refill */
635 if (!(cur_slot % (DWC3_TRB_NUM / 4)))
636 trb.ioc = last;
637 break;
638
639 case USB_ENDPOINT_XFER_BULK:
640 case USB_ENDPOINT_XFER_INT:
641 trb.trbctl = DWC3_TRBCTL_NORMAL;
642 break;
643 default:
644 /*
645 * This is only possible with faulty memory because we
646 * checked it already :)
647 */
648 BUG();
649 }
650
651 trb.length = length;
652 trb.bplh = dma;
653 trb.hwo = true;
654
655 dwc3_trb_to_hw(&trb, trb_hw);
656 }
657
658 /*
659 * dwc3_prepare_trbs - setup TRBs from requests
660 * @dep: endpoint for which requests are being prepared
661 * @starting: true if the endpoint is idle and no requests are queued.
662 *
663 * The functions goes through the requests list and setups TRBs for the
664 * transfers. The functions returns once there are not more TRBs available or
665 * it run out of requests.
666 */
667 static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
668 {
669 struct dwc3_request *req, *n;
670 u32 trbs_left;
671 unsigned int last_one = 0;
672
673 BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
674
675 /* the first request must not be queued */
676 trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
677
678 /*
679 * if busy & slot are equal than it is either full or empty. If we are
680 * starting to proceed requests then we are empty. Otherwise we ar
681 * full and don't do anything
682 */
683 if (!trbs_left) {
684 if (!starting)
685 return;
686 trbs_left = DWC3_TRB_NUM;
687 /*
688 * In case we start from scratch, we queue the ISOC requests
689 * starting from slot 1. This is done because we use ring
690 * buffer and have no LST bit to stop us. Instead, we place
691 * IOC bit TRB_NUM/4. We try to avoid to having an interrupt
692 * after the first request so we start at slot 1 and have
693 * 7 requests proceed before we hit the first IOC.
694 * Other transfer types don't use the ring buffer and are
695 * processed from the first TRB until the last one. Since we
696 * don't wrap around we have to start at the beginning.
697 */
698 if (usb_endpoint_xfer_isoc(dep->desc)) {
699 dep->busy_slot = 1;
700 dep->free_slot = 1;
701 } else {
702 dep->busy_slot = 0;
703 dep->free_slot = 0;
704 }
705 }
706
707 /* The last TRB is a link TRB, not used for xfer */
708 if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc))
709 return;
710
711 list_for_each_entry_safe(req, n, &dep->request_list, list) {
712 unsigned length;
713 dma_addr_t dma;
714
715 if (req->request.num_mapped_sgs > 0) {
716 struct usb_request *request = &req->request;
717 struct scatterlist *sg = request->sg;
718 struct scatterlist *s;
719 int i;
720
721 for_each_sg(sg, s, request->num_mapped_sgs, i) {
722 unsigned chain = true;
723
724 length = sg_dma_len(s);
725 dma = sg_dma_address(s);
726
727 if (i == (request->num_mapped_sgs - 1)
728 || sg_is_last(s)) {
729 last_one = true;
730 chain = false;
731 }
732
733 trbs_left--;
734 if (!trbs_left)
735 last_one = true;
736
737 if (last_one)
738 chain = false;
739
740 dwc3_prepare_one_trb(dep, req, dma, length,
741 last_one, chain);
742
743 if (last_one)
744 break;
745 }
746 } else {
747 dma = req->request.dma;
748 length = req->request.length;
749 trbs_left--;
750
751 if (!trbs_left)
752 last_one = 1;
753
754 /* Is this the last request? */
755 if (list_is_last(&req->list, &dep->request_list))
756 last_one = 1;
757
758 dwc3_prepare_one_trb(dep, req, dma, length,
759 last_one, false);
760
761 if (last_one)
762 break;
763 }
764 }
765 }
766
767 static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
768 int start_new)
769 {
770 struct dwc3_gadget_ep_cmd_params params;
771 struct dwc3_request *req;
772 struct dwc3 *dwc = dep->dwc;
773 int ret;
774 u32 cmd;
775
776 if (start_new && (dep->flags & DWC3_EP_BUSY)) {
777 dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name);
778 return -EBUSY;
779 }
780 dep->flags &= ~DWC3_EP_PENDING_REQUEST;
781
782 /*
783 * If we are getting here after a short-out-packet we don't enqueue any
784 * new requests as we try to set the IOC bit only on the last request.
785 */
786 if (start_new) {
787 if (list_empty(&dep->req_queued))
788 dwc3_prepare_trbs(dep, start_new);
789
790 /* req points to the first request which will be sent */
791 req = next_request(&dep->req_queued);
792 } else {
793 dwc3_prepare_trbs(dep, start_new);
794
795 /*
796 * req points to the first request where HWO changed
797 * from 0 to 1
798 */
799 req = next_request(&dep->req_queued);
800 }
801 if (!req) {
802 dep->flags |= DWC3_EP_PENDING_REQUEST;
803 return 0;
804 }
805
806 memset(&params, 0, sizeof(params));
807 params.param0 = upper_32_bits(req->trb_dma);
808 params.param1 = lower_32_bits(req->trb_dma);
809
810 if (start_new)
811 cmd = DWC3_DEPCMD_STARTTRANSFER;
812 else
813 cmd = DWC3_DEPCMD_UPDATETRANSFER;
814
815 cmd |= DWC3_DEPCMD_PARAM(cmd_param);
816 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
817 if (ret < 0) {
818 dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
819
820 /*
821 * FIXME we need to iterate over the list of requests
822 * here and stop, unmap, free and del each of the linked
823 * requests instead of we do now.
824 */
825 dwc3_unmap_buffer_from_dma(req);
826 list_del(&req->list);
827 return ret;
828 }
829
830 dep->flags |= DWC3_EP_BUSY;
831 dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
832 dep->number);
833
834 WARN_ON_ONCE(!dep->res_trans_idx);
835
836 return 0;
837 }
838
839 static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
840 {
841 req->request.actual = 0;
842 req->request.status = -EINPROGRESS;
843 req->direction = dep->direction;
844 req->epnum = dep->number;
845
846 /*
847 * We only add to our list of requests now and
848 * start consuming the list once we get XferNotReady
849 * IRQ.
850 *
851 * That way, we avoid doing anything that we don't need
852 * to do now and defer it until the point we receive a
853 * particular token from the Host side.
854 *
855 * This will also avoid Host cancelling URBs due to too
856 * many NACKs.
857 */
858 dwc3_map_buffer_to_dma(req);
859 list_add_tail(&req->list, &dep->request_list);
860
861 /*
862 * There is one special case: XferNotReady with
863 * empty list of requests. We need to kick the
864 * transfer here in that situation, otherwise
865 * we will be NAKing forever.
866 *
867 * If we get XferNotReady before gadget driver
868 * has a chance to queue a request, we will ACK
869 * the IRQ but won't be able to receive the data
870 * until the next request is queued. The following
871 * code is handling exactly that.
872 */
873 if (dep->flags & DWC3_EP_PENDING_REQUEST) {
874 int ret;
875 int start_trans;
876
877 start_trans = 1;
878 if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
879 dep->flags & DWC3_EP_BUSY)
880 start_trans = 0;
881
882 ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans);
883 if (ret && ret != -EBUSY) {
884 struct dwc3 *dwc = dep->dwc;
885
886 dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
887 dep->name);
888 }
889 };
890
891 return 0;
892 }
893
894 static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
895 gfp_t gfp_flags)
896 {
897 struct dwc3_request *req = to_dwc3_request(request);
898 struct dwc3_ep *dep = to_dwc3_ep(ep);
899 struct dwc3 *dwc = dep->dwc;
900
901 unsigned long flags;
902
903 int ret;
904
905 if (!dep->desc) {
906 dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
907 request, ep->name);
908 return -ESHUTDOWN;
909 }
910
911 dev_vdbg(dwc->dev, "queing request %p to %s length %d\n",
912 request, ep->name, request->length);
913
914 spin_lock_irqsave(&dwc->lock, flags);
915 ret = __dwc3_gadget_ep_queue(dep, req);
916 spin_unlock_irqrestore(&dwc->lock, flags);
917
918 return ret;
919 }
920
921 static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
922 struct usb_request *request)
923 {
924 struct dwc3_request *req = to_dwc3_request(request);
925 struct dwc3_request *r = NULL;
926
927 struct dwc3_ep *dep = to_dwc3_ep(ep);
928 struct dwc3 *dwc = dep->dwc;
929
930 unsigned long flags;
931 int ret = 0;
932
933 spin_lock_irqsave(&dwc->lock, flags);
934
935 list_for_each_entry(r, &dep->request_list, list) {
936 if (r == req)
937 break;
938 }
939
940 if (r != req) {
941 list_for_each_entry(r, &dep->req_queued, list) {
942 if (r == req)
943 break;
944 }
945 if (r == req) {
946 /* wait until it is processed */
947 dwc3_stop_active_transfer(dwc, dep->number);
948 goto out0;
949 }
950 dev_err(dwc->dev, "request %p was not queued to %s\n",
951 request, ep->name);
952 ret = -EINVAL;
953 goto out0;
954 }
955
956 /* giveback the request */
957 dwc3_gadget_giveback(dep, req, -ECONNRESET);
958
959 out0:
960 spin_unlock_irqrestore(&dwc->lock, flags);
961
962 return ret;
963 }
964
965 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
966 {
967 struct dwc3_gadget_ep_cmd_params params;
968 struct dwc3 *dwc = dep->dwc;
969 int ret;
970
971 memset(&params, 0x00, sizeof(params));
972
973 if (value) {
974 if (dep->number == 0 || dep->number == 1) {
975 /*
976 * Whenever EP0 is stalled, we will restart
977 * the state machine, thus moving back to
978 * Setup Phase
979 */
980 dwc->ep0state = EP0_SETUP_PHASE;
981 }
982
983 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
984 DWC3_DEPCMD_SETSTALL, &params);
985 if (ret)
986 dev_err(dwc->dev, "failed to %s STALL on %s\n",
987 value ? "set" : "clear",
988 dep->name);
989 else
990 dep->flags |= DWC3_EP_STALL;
991 } else {
992 if (dep->flags & DWC3_EP_WEDGE)
993 return 0;
994
995 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
996 DWC3_DEPCMD_CLEARSTALL, &params);
997 if (ret)
998 dev_err(dwc->dev, "failed to %s STALL on %s\n",
999 value ? "set" : "clear",
1000 dep->name);
1001 else
1002 dep->flags &= ~DWC3_EP_STALL;
1003 }
1004
1005 return ret;
1006 }
1007
1008 static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
1009 {
1010 struct dwc3_ep *dep = to_dwc3_ep(ep);
1011 struct dwc3 *dwc = dep->dwc;
1012
1013 unsigned long flags;
1014
1015 int ret;
1016
1017 spin_lock_irqsave(&dwc->lock, flags);
1018
1019 if (usb_endpoint_xfer_isoc(dep->desc)) {
1020 dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
1021 ret = -EINVAL;
1022 goto out;
1023 }
1024
1025 ret = __dwc3_gadget_ep_set_halt(dep, value);
1026 out:
1027 spin_unlock_irqrestore(&dwc->lock, flags);
1028
1029 return ret;
1030 }
1031
1032 static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
1033 {
1034 struct dwc3_ep *dep = to_dwc3_ep(ep);
1035
1036 dep->flags |= DWC3_EP_WEDGE;
1037
1038 return dwc3_gadget_ep_set_halt(ep, 1);
1039 }
1040
1041 /* -------------------------------------------------------------------------- */
1042
1043 static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
1044 .bLength = USB_DT_ENDPOINT_SIZE,
1045 .bDescriptorType = USB_DT_ENDPOINT,
1046 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
1047 };
1048
1049 static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
1050 .enable = dwc3_gadget_ep0_enable,
1051 .disable = dwc3_gadget_ep0_disable,
1052 .alloc_request = dwc3_gadget_ep_alloc_request,
1053 .free_request = dwc3_gadget_ep_free_request,
1054 .queue = dwc3_gadget_ep0_queue,
1055 .dequeue = dwc3_gadget_ep_dequeue,
1056 .set_halt = dwc3_gadget_ep_set_halt,
1057 .set_wedge = dwc3_gadget_ep_set_wedge,
1058 };
1059
1060 static const struct usb_ep_ops dwc3_gadget_ep_ops = {
1061 .enable = dwc3_gadget_ep_enable,
1062 .disable = dwc3_gadget_ep_disable,
1063 .alloc_request = dwc3_gadget_ep_alloc_request,
1064 .free_request = dwc3_gadget_ep_free_request,
1065 .queue = dwc3_gadget_ep_queue,
1066 .dequeue = dwc3_gadget_ep_dequeue,
1067 .set_halt = dwc3_gadget_ep_set_halt,
1068 .set_wedge = dwc3_gadget_ep_set_wedge,
1069 };
1070
1071 /* -------------------------------------------------------------------------- */
1072
1073 static int dwc3_gadget_get_frame(struct usb_gadget *g)
1074 {
1075 struct dwc3 *dwc = gadget_to_dwc(g);
1076 u32 reg;
1077
1078 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1079 return DWC3_DSTS_SOFFN(reg);
1080 }
1081
1082 static int dwc3_gadget_wakeup(struct usb_gadget *g)
1083 {
1084 struct dwc3 *dwc = gadget_to_dwc(g);
1085
1086 unsigned long timeout;
1087 unsigned long flags;
1088
1089 u32 reg;
1090
1091 int ret = 0;
1092
1093 u8 link_state;
1094 u8 speed;
1095
1096 spin_lock_irqsave(&dwc->lock, flags);
1097
1098 /*
1099 * According to the Databook Remote wakeup request should
1100 * be issued only when the device is in early suspend state.
1101 *
1102 * We can check that via USB Link State bits in DSTS register.
1103 */
1104 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1105
1106 speed = reg & DWC3_DSTS_CONNECTSPD;
1107 if (speed == DWC3_DSTS_SUPERSPEED) {
1108 dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
1109 ret = -EINVAL;
1110 goto out;
1111 }
1112
1113 link_state = DWC3_DSTS_USBLNKST(reg);
1114
1115 switch (link_state) {
1116 case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */
1117 case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */
1118 break;
1119 default:
1120 dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
1121 link_state);
1122 ret = -EINVAL;
1123 goto out;
1124 }
1125
1126 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1127
1128 /*
1129 * Switch link state to Recovery. In HS/FS/LS this means
1130 * RemoteWakeup Request
1131 */
1132 reg |= DWC3_DCTL_ULSTCHNG_RECOVERY;
1133 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1134
1135 /* wait for at least 2000us */
1136 usleep_range(2000, 2500);
1137
1138 /* write zeroes to Link Change Request */
1139 reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
1140 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1141
1142 /* pool until Link State change to ON */
1143 timeout = jiffies + msecs_to_jiffies(100);
1144
1145 while (!(time_after(jiffies, timeout))) {
1146 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1147
1148 /* in HS, means ON */
1149 if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
1150 break;
1151 }
1152
1153 if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
1154 dev_err(dwc->dev, "failed to send remote wakeup\n");
1155 ret = -EINVAL;
1156 }
1157
1158 out:
1159 spin_unlock_irqrestore(&dwc->lock, flags);
1160
1161 return ret;
1162 }
1163
1164 static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
1165 int is_selfpowered)
1166 {
1167 struct dwc3 *dwc = gadget_to_dwc(g);
1168
1169 dwc->is_selfpowered = !!is_selfpowered;
1170
1171 return 0;
1172 }
1173
1174 static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
1175 {
1176 u32 reg;
1177 u32 timeout = 500;
1178
1179 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1180 if (is_on)
1181 reg |= DWC3_DCTL_RUN_STOP;
1182 else
1183 reg &= ~DWC3_DCTL_RUN_STOP;
1184
1185 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1186
1187 do {
1188 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1189 if (is_on) {
1190 if (!(reg & DWC3_DSTS_DEVCTRLHLT))
1191 break;
1192 } else {
1193 if (reg & DWC3_DSTS_DEVCTRLHLT)
1194 break;
1195 }
1196 timeout--;
1197 if (!timeout)
1198 break;
1199 udelay(1);
1200 } while (1);
1201
1202 dev_vdbg(dwc->dev, "gadget %s data soft-%s\n",
1203 dwc->gadget_driver
1204 ? dwc->gadget_driver->function : "no-function",
1205 is_on ? "connect" : "disconnect");
1206 }
1207
1208 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
1209 {
1210 struct dwc3 *dwc = gadget_to_dwc(g);
1211 unsigned long flags;
1212
1213 is_on = !!is_on;
1214
1215 spin_lock_irqsave(&dwc->lock, flags);
1216 dwc3_gadget_run_stop(dwc, is_on);
1217 spin_unlock_irqrestore(&dwc->lock, flags);
1218
1219 return 0;
1220 }
1221
1222 static int dwc3_gadget_start(struct usb_gadget *g,
1223 struct usb_gadget_driver *driver)
1224 {
1225 struct dwc3 *dwc = gadget_to_dwc(g);
1226 struct dwc3_ep *dep;
1227 unsigned long flags;
1228 int ret = 0;
1229 u32 reg;
1230
1231 spin_lock_irqsave(&dwc->lock, flags);
1232
1233 if (dwc->gadget_driver) {
1234 dev_err(dwc->dev, "%s is already bound to %s\n",
1235 dwc->gadget.name,
1236 dwc->gadget_driver->driver.name);
1237 ret = -EBUSY;
1238 goto err0;
1239 }
1240
1241 dwc->gadget_driver = driver;
1242 dwc->gadget.dev.driver = &driver->driver;
1243
1244 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
1245 reg &= ~(DWC3_DCFG_SPEED_MASK);
1246 reg |= dwc->maximum_speed;
1247 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
1248
1249 dwc->start_config_issued = false;
1250
1251 /* Start with SuperSpeed Default */
1252 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
1253
1254 dep = dwc->eps[0];
1255 ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
1256 if (ret) {
1257 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1258 goto err0;
1259 }
1260
1261 dep = dwc->eps[1];
1262 ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
1263 if (ret) {
1264 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1265 goto err1;
1266 }
1267
1268 /* begin to receive SETUP packets */
1269 dwc->ep0state = EP0_SETUP_PHASE;
1270 dwc3_ep0_out_start(dwc);
1271
1272 spin_unlock_irqrestore(&dwc->lock, flags);
1273
1274 return 0;
1275
1276 err1:
1277 __dwc3_gadget_ep_disable(dwc->eps[0]);
1278
1279 err0:
1280 spin_unlock_irqrestore(&dwc->lock, flags);
1281
1282 return ret;
1283 }
1284
1285 static int dwc3_gadget_stop(struct usb_gadget *g,
1286 struct usb_gadget_driver *driver)
1287 {
1288 struct dwc3 *dwc = gadget_to_dwc(g);
1289 unsigned long flags;
1290
1291 spin_lock_irqsave(&dwc->lock, flags);
1292
1293 __dwc3_gadget_ep_disable(dwc->eps[0]);
1294 __dwc3_gadget_ep_disable(dwc->eps[1]);
1295
1296 dwc->gadget_driver = NULL;
1297 dwc->gadget.dev.driver = NULL;
1298
1299 spin_unlock_irqrestore(&dwc->lock, flags);
1300
1301 return 0;
1302 }
1303 static const struct usb_gadget_ops dwc3_gadget_ops = {
1304 .get_frame = dwc3_gadget_get_frame,
1305 .wakeup = dwc3_gadget_wakeup,
1306 .set_selfpowered = dwc3_gadget_set_selfpowered,
1307 .pullup = dwc3_gadget_pullup,
1308 .udc_start = dwc3_gadget_start,
1309 .udc_stop = dwc3_gadget_stop,
1310 };
1311
1312 /* -------------------------------------------------------------------------- */
1313
1314 static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc)
1315 {
1316 struct dwc3_ep *dep;
1317 u8 epnum;
1318
1319 INIT_LIST_HEAD(&dwc->gadget.ep_list);
1320
1321 for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1322 dep = kzalloc(sizeof(*dep), GFP_KERNEL);
1323 if (!dep) {
1324 dev_err(dwc->dev, "can't allocate endpoint %d\n",
1325 epnum);
1326 return -ENOMEM;
1327 }
1328
1329 dep->dwc = dwc;
1330 dep->number = epnum;
1331 dwc->eps[epnum] = dep;
1332
1333 snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
1334 (epnum & 1) ? "in" : "out");
1335 dep->endpoint.name = dep->name;
1336 dep->direction = (epnum & 1);
1337
1338 if (epnum == 0 || epnum == 1) {
1339 dep->endpoint.maxpacket = 512;
1340 dep->endpoint.ops = &dwc3_gadget_ep0_ops;
1341 if (!epnum)
1342 dwc->gadget.ep0 = &dep->endpoint;
1343 } else {
1344 int ret;
1345
1346 dep->endpoint.maxpacket = 1024;
1347 dep->endpoint.max_streams = 15;
1348 dep->endpoint.ops = &dwc3_gadget_ep_ops;
1349 list_add_tail(&dep->endpoint.ep_list,
1350 &dwc->gadget.ep_list);
1351
1352 ret = dwc3_alloc_trb_pool(dep);
1353 if (ret)
1354 return ret;
1355 }
1356
1357 INIT_LIST_HEAD(&dep->request_list);
1358 INIT_LIST_HEAD(&dep->req_queued);
1359 }
1360
1361 return 0;
1362 }
1363
1364 static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
1365 {
1366 struct dwc3_ep *dep;
1367 u8 epnum;
1368
1369 for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1370 dep = dwc->eps[epnum];
1371 dwc3_free_trb_pool(dep);
1372
1373 if (epnum != 0 && epnum != 1)
1374 list_del(&dep->endpoint.ep_list);
1375
1376 kfree(dep);
1377 }
1378 }
1379
1380 static void dwc3_gadget_release(struct device *dev)
1381 {
1382 dev_dbg(dev, "%s\n", __func__);
1383 }
1384
1385 /* -------------------------------------------------------------------------- */
1386 static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
1387 const struct dwc3_event_depevt *event, int status)
1388 {
1389 struct dwc3_request *req;
1390 struct dwc3_trb trb;
1391 unsigned int count;
1392 unsigned int s_pkt = 0;
1393
1394 do {
1395 req = next_request(&dep->req_queued);
1396 if (!req) {
1397 WARN_ON_ONCE(1);
1398 return 1;
1399 }
1400
1401 dwc3_trb_to_nat(req->trb, &trb);
1402
1403 if (trb.hwo && status != -ESHUTDOWN)
1404 /*
1405 * We continue despite the error. There is not much we
1406 * can do. If we don't clean in up we loop for ever. If
1407 * we skip the TRB than it gets overwritten reused after
1408 * a while since we use them in a ring buffer. a BUG()
1409 * would help. Lets hope that if this occures, someone
1410 * fixes the root cause instead of looking away :)
1411 */
1412 dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
1413 dep->name, req->trb);
1414 count = trb.length;
1415
1416 if (dep->direction) {
1417 if (count) {
1418 dev_err(dwc->dev, "incomplete IN transfer %s\n",
1419 dep->name);
1420 status = -ECONNRESET;
1421 }
1422 } else {
1423 if (count && (event->status & DEPEVT_STATUS_SHORT))
1424 s_pkt = 1;
1425 }
1426
1427 /*
1428 * We assume here we will always receive the entire data block
1429 * which we should receive. Meaning, if we program RX to
1430 * receive 4K but we receive only 2K, we assume that's all we
1431 * should receive and we simply bounce the request back to the
1432 * gadget driver for further processing.
1433 */
1434 req->request.actual += req->request.length - count;
1435 dwc3_gadget_giveback(dep, req, status);
1436 if (s_pkt)
1437 break;
1438 if ((event->status & DEPEVT_STATUS_LST) && trb.lst)
1439 break;
1440 if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
1441 break;
1442 } while (1);
1443
1444 if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
1445 return 0;
1446 return 1;
1447 }
1448
1449 static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
1450 struct dwc3_ep *dep, const struct dwc3_event_depevt *event,
1451 int start_new)
1452 {
1453 unsigned status = 0;
1454 int clean_busy;
1455
1456 if (event->status & DEPEVT_STATUS_BUSERR)
1457 status = -ECONNRESET;
1458
1459 clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
1460 if (clean_busy) {
1461 dep->flags &= ~DWC3_EP_BUSY;
1462 dep->res_trans_idx = 0;
1463 }
1464
1465 /*
1466 * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
1467 * See dwc3_gadget_linksts_change_interrupt() for 1st half.
1468 */
1469 if (dwc->revision < DWC3_REVISION_183A) {
1470 u32 reg;
1471 int i;
1472
1473 for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
1474 struct dwc3_ep *dep = dwc->eps[i];
1475
1476 if (!(dep->flags & DWC3_EP_ENABLED))
1477 continue;
1478
1479 if (!list_empty(&dep->req_queued))
1480 return;
1481 }
1482
1483 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1484 reg |= dwc->u1u2;
1485 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1486
1487 dwc->u1u2 = 0;
1488 }
1489 }
1490
1491 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
1492 struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
1493 {
1494 u32 uf;
1495
1496 if (list_empty(&dep->request_list)) {
1497 dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
1498 dep->name);
1499 return;
1500 }
1501
1502 if (event->parameters) {
1503 u32 mask;
1504
1505 mask = ~(dep->interval - 1);
1506 uf = event->parameters & mask;
1507 /* 4 micro frames in the future */
1508 uf += dep->interval * 4;
1509 } else {
1510 uf = 0;
1511 }
1512
1513 __dwc3_gadget_kick_transfer(dep, uf, 1);
1514 }
1515
1516 static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
1517 const struct dwc3_event_depevt *event)
1518 {
1519 struct dwc3 *dwc = dep->dwc;
1520 struct dwc3_event_depevt mod_ev = *event;
1521
1522 /*
1523 * We were asked to remove one requests. It is possible that this
1524 * request and a few other were started together and have the same
1525 * transfer index. Since we stopped the complete endpoint we don't
1526 * know how many requests were already completed (and not yet)
1527 * reported and how could be done (later). We purge them all until
1528 * the end of the list.
1529 */
1530 mod_ev.status = DEPEVT_STATUS_LST;
1531 dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN);
1532 dep->flags &= ~DWC3_EP_BUSY;
1533 /* pending requets are ignored and are queued on XferNotReady */
1534 }
1535
1536 static void dwc3_ep_cmd_compl(struct dwc3_ep *dep,
1537 const struct dwc3_event_depevt *event)
1538 {
1539 u32 param = event->parameters;
1540 u32 cmd_type = (param >> 8) & ((1 << 5) - 1);
1541
1542 switch (cmd_type) {
1543 case DWC3_DEPCMD_ENDTRANSFER:
1544 dwc3_process_ep_cmd_complete(dep, event);
1545 break;
1546 case DWC3_DEPCMD_STARTTRANSFER:
1547 dep->res_trans_idx = param & 0x7f;
1548 break;
1549 default:
1550 printk(KERN_ERR "%s() unknown /unexpected type: %d\n",
1551 __func__, cmd_type);
1552 break;
1553 };
1554 }
1555
1556 static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
1557 const struct dwc3_event_depevt *event)
1558 {
1559 struct dwc3_ep *dep;
1560 u8 epnum = event->endpoint_number;
1561
1562 dep = dwc->eps[epnum];
1563
1564 dev_vdbg(dwc->dev, "%s: %s\n", dep->name,
1565 dwc3_ep_event_string(event->endpoint_event));
1566
1567 if (epnum == 0 || epnum == 1) {
1568 dwc3_ep0_interrupt(dwc, event);
1569 return;
1570 }
1571
1572 switch (event->endpoint_event) {
1573 case DWC3_DEPEVT_XFERCOMPLETE:
1574 if (usb_endpoint_xfer_isoc(dep->desc)) {
1575 dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
1576 dep->name);
1577 return;
1578 }
1579
1580 dwc3_endpoint_transfer_complete(dwc, dep, event, 1);
1581 break;
1582 case DWC3_DEPEVT_XFERINPROGRESS:
1583 if (!usb_endpoint_xfer_isoc(dep->desc)) {
1584 dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n",
1585 dep->name);
1586 return;
1587 }
1588
1589 dwc3_endpoint_transfer_complete(dwc, dep, event, 0);
1590 break;
1591 case DWC3_DEPEVT_XFERNOTREADY:
1592 if (usb_endpoint_xfer_isoc(dep->desc)) {
1593 dwc3_gadget_start_isoc(dwc, dep, event);
1594 } else {
1595 int ret;
1596
1597 dev_vdbg(dwc->dev, "%s: reason %s\n",
1598 dep->name, event->status
1599 ? "Transfer Active"
1600 : "Transfer Not Active");
1601
1602 ret = __dwc3_gadget_kick_transfer(dep, 0, 1);
1603 if (!ret || ret == -EBUSY)
1604 return;
1605
1606 dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1607 dep->name);
1608 }
1609
1610 break;
1611 case DWC3_DEPEVT_STREAMEVT:
1612 if (!usb_endpoint_xfer_bulk(dep->desc)) {
1613 dev_err(dwc->dev, "Stream event for non-Bulk %s\n",
1614 dep->name);
1615 return;
1616 }
1617
1618 switch (event->status) {
1619 case DEPEVT_STREAMEVT_FOUND:
1620 dev_vdbg(dwc->dev, "Stream %d found and started\n",
1621 event->parameters);
1622
1623 break;
1624 case DEPEVT_STREAMEVT_NOTFOUND:
1625 /* FALLTHROUGH */
1626 default:
1627 dev_dbg(dwc->dev, "Couldn't find suitable stream\n");
1628 }
1629 break;
1630 case DWC3_DEPEVT_RXTXFIFOEVT:
1631 dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
1632 break;
1633 case DWC3_DEPEVT_EPCMDCMPLT:
1634 dwc3_ep_cmd_compl(dep, event);
1635 break;
1636 }
1637 }
1638
1639 static void dwc3_disconnect_gadget(struct dwc3 *dwc)
1640 {
1641 if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
1642 spin_unlock(&dwc->lock);
1643 dwc->gadget_driver->disconnect(&dwc->gadget);
1644 spin_lock(&dwc->lock);
1645 }
1646 }
1647
1648 static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
1649 {
1650 struct dwc3_ep *dep;
1651 struct dwc3_gadget_ep_cmd_params params;
1652 u32 cmd;
1653 int ret;
1654
1655 dep = dwc->eps[epnum];
1656
1657 WARN_ON(!dep->res_trans_idx);
1658 if (dep->res_trans_idx) {
1659 cmd = DWC3_DEPCMD_ENDTRANSFER;
1660 cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
1661 cmd |= DWC3_DEPCMD_PARAM(dep->res_trans_idx);
1662 memset(&params, 0, sizeof(params));
1663 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
1664 WARN_ON_ONCE(ret);
1665 dep->res_trans_idx = 0;
1666 }
1667 }
1668
1669 static void dwc3_stop_active_transfers(struct dwc3 *dwc)
1670 {
1671 u32 epnum;
1672
1673 for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1674 struct dwc3_ep *dep;
1675
1676 dep = dwc->eps[epnum];
1677 if (!(dep->flags & DWC3_EP_ENABLED))
1678 continue;
1679
1680 dwc3_remove_requests(dwc, dep);
1681 }
1682 }
1683
1684 static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
1685 {
1686 u32 epnum;
1687
1688 for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1689 struct dwc3_ep *dep;
1690 struct dwc3_gadget_ep_cmd_params params;
1691 int ret;
1692
1693 dep = dwc->eps[epnum];
1694
1695 if (!(dep->flags & DWC3_EP_STALL))
1696 continue;
1697
1698 dep->flags &= ~DWC3_EP_STALL;
1699
1700 memset(&params, 0, sizeof(params));
1701 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
1702 DWC3_DEPCMD_CLEARSTALL, &params);
1703 WARN_ON_ONCE(ret);
1704 }
1705 }
1706
1707 static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
1708 {
1709 dev_vdbg(dwc->dev, "%s\n", __func__);
1710 #if 0
1711 XXX
1712 U1/U2 is powersave optimization. Skip it for now. Anyway we need to
1713 enable it before we can disable it.
1714
1715 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1716 reg &= ~DWC3_DCTL_INITU1ENA;
1717 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1718
1719 reg &= ~DWC3_DCTL_INITU2ENA;
1720 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1721 #endif
1722
1723 dwc3_stop_active_transfers(dwc);
1724 dwc3_disconnect_gadget(dwc);
1725 dwc->start_config_issued = false;
1726
1727 dwc->gadget.speed = USB_SPEED_UNKNOWN;
1728 dwc->setup_packet_pending = false;
1729 }
1730
1731 static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on)
1732 {
1733 u32 reg;
1734
1735 reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
1736
1737 if (on)
1738 reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
1739 else
1740 reg |= DWC3_GUSB3PIPECTL_SUSPHY;
1741
1742 dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
1743 }
1744
1745 static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on)
1746 {
1747 u32 reg;
1748
1749 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
1750
1751 if (on)
1752 reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
1753 else
1754 reg |= DWC3_GUSB2PHYCFG_SUSPHY;
1755
1756 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
1757 }
1758
1759 static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
1760 {
1761 u32 reg;
1762
1763 dev_vdbg(dwc->dev, "%s\n", __func__);
1764
1765 /*
1766 * WORKAROUND: DWC3 revisions <1.88a have an issue which
1767 * would cause a missing Disconnect Event if there's a
1768 * pending Setup Packet in the FIFO.
1769 *
1770 * There's no suggested workaround on the official Bug
1771 * report, which states that "unless the driver/application
1772 * is doing any special handling of a disconnect event,
1773 * there is no functional issue".
1774 *
1775 * Unfortunately, it turns out that we _do_ some special
1776 * handling of a disconnect event, namely complete all
1777 * pending transfers, notify gadget driver of the
1778 * disconnection, and so on.
1779 *
1780 * Our suggested workaround is to follow the Disconnect
1781 * Event steps here, instead, based on a setup_packet_pending
1782 * flag. Such flag gets set whenever we have a XferNotReady
1783 * event on EP0 and gets cleared on XferComplete for the
1784 * same endpoint.
1785 *
1786 * Refers to:
1787 *
1788 * STAR#9000466709: RTL: Device : Disconnect event not
1789 * generated if setup packet pending in FIFO
1790 */
1791 if (dwc->revision < DWC3_REVISION_188A) {
1792 if (dwc->setup_packet_pending)
1793 dwc3_gadget_disconnect_interrupt(dwc);
1794 }
1795
1796 /* after reset -> Default State */
1797 dwc->dev_state = DWC3_DEFAULT_STATE;
1798
1799 /* Enable PHYs */
1800 dwc3_gadget_usb2_phy_power(dwc, true);
1801 dwc3_gadget_usb3_phy_power(dwc, true);
1802
1803 if (dwc->gadget.speed != USB_SPEED_UNKNOWN)
1804 dwc3_disconnect_gadget(dwc);
1805
1806 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1807 reg &= ~DWC3_DCTL_TSTCTRL_MASK;
1808 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1809
1810 dwc3_stop_active_transfers(dwc);
1811 dwc3_clear_stall_all_ep(dwc);
1812 dwc->start_config_issued = false;
1813
1814 /* Reset device address to zero */
1815 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
1816 reg &= ~(DWC3_DCFG_DEVADDR_MASK);
1817 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
1818 }
1819
1820 static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
1821 {
1822 u32 reg;
1823 u32 usb30_clock = DWC3_GCTL_CLK_BUS;
1824
1825 /*
1826 * We change the clock only at SS but I dunno why I would want to do
1827 * this. Maybe it becomes part of the power saving plan.
1828 */
1829
1830 if (speed != DWC3_DSTS_SUPERSPEED)
1831 return;
1832
1833 /*
1834 * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
1835 * each time on Connect Done.
1836 */
1837 if (!usb30_clock)
1838 return;
1839
1840 reg = dwc3_readl(dwc->regs, DWC3_GCTL);
1841 reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
1842 dwc3_writel(dwc->regs, DWC3_GCTL, reg);
1843 }
1844
1845 static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed)
1846 {
1847 switch (speed) {
1848 case USB_SPEED_SUPER:
1849 dwc3_gadget_usb2_phy_power(dwc, false);
1850 break;
1851 case USB_SPEED_HIGH:
1852 case USB_SPEED_FULL:
1853 case USB_SPEED_LOW:
1854 dwc3_gadget_usb3_phy_power(dwc, false);
1855 break;
1856 }
1857 }
1858
1859 static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
1860 {
1861 struct dwc3_gadget_ep_cmd_params params;
1862 struct dwc3_ep *dep;
1863 int ret;
1864 u32 reg;
1865 u8 speed;
1866
1867 dev_vdbg(dwc->dev, "%s\n", __func__);
1868
1869 memset(&params, 0x00, sizeof(params));
1870
1871 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1872 speed = reg & DWC3_DSTS_CONNECTSPD;
1873 dwc->speed = speed;
1874
1875 dwc3_update_ram_clk_sel(dwc, speed);
1876
1877 switch (speed) {
1878 case DWC3_DCFG_SUPERSPEED:
1879 /*
1880 * WORKAROUND: DWC3 revisions <1.90a have an issue which
1881 * would cause a missing USB3 Reset event.
1882 *
1883 * In such situations, we should force a USB3 Reset
1884 * event by calling our dwc3_gadget_reset_interrupt()
1885 * routine.
1886 *
1887 * Refers to:
1888 *
1889 * STAR#9000483510: RTL: SS : USB3 reset event may
1890 * not be generated always when the link enters poll
1891 */
1892 if (dwc->revision < DWC3_REVISION_190A)
1893 dwc3_gadget_reset_interrupt(dwc);
1894
1895 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
1896 dwc->gadget.ep0->maxpacket = 512;
1897 dwc->gadget.speed = USB_SPEED_SUPER;
1898 break;
1899 case DWC3_DCFG_HIGHSPEED:
1900 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
1901 dwc->gadget.ep0->maxpacket = 64;
1902 dwc->gadget.speed = USB_SPEED_HIGH;
1903 break;
1904 case DWC3_DCFG_FULLSPEED2:
1905 case DWC3_DCFG_FULLSPEED1:
1906 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
1907 dwc->gadget.ep0->maxpacket = 64;
1908 dwc->gadget.speed = USB_SPEED_FULL;
1909 break;
1910 case DWC3_DCFG_LOWSPEED:
1911 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
1912 dwc->gadget.ep0->maxpacket = 8;
1913 dwc->gadget.speed = USB_SPEED_LOW;
1914 break;
1915 }
1916
1917 /* Disable unneded PHY */
1918 dwc3_gadget_disable_phy(dwc, dwc->gadget.speed);
1919
1920 dep = dwc->eps[0];
1921 ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
1922 if (ret) {
1923 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1924 return;
1925 }
1926
1927 dep = dwc->eps[1];
1928 ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
1929 if (ret) {
1930 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1931 return;
1932 }
1933
1934 /*
1935 * Configure PHY via GUSB3PIPECTLn if required.
1936 *
1937 * Update GTXFIFOSIZn
1938 *
1939 * In both cases reset values should be sufficient.
1940 */
1941 }
1942
1943 static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
1944 {
1945 dev_vdbg(dwc->dev, "%s\n", __func__);
1946
1947 /*
1948 * TODO take core out of low power mode when that's
1949 * implemented.
1950 */
1951
1952 dwc->gadget_driver->resume(&dwc->gadget);
1953 }
1954
1955 static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
1956 unsigned int evtinfo)
1957 {
1958 enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
1959
1960 /*
1961 * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
1962 * on the link partner, the USB session might do multiple entry/exit
1963 * of low power states before a transfer takes place.
1964 *
1965 * Due to this problem, we might experience lower throughput. The
1966 * suggested workaround is to disable DCTL[12:9] bits if we're
1967 * transitioning from U1/U2 to U0 and enable those bits again
1968 * after a transfer completes and there are no pending transfers
1969 * on any of the enabled endpoints.
1970 *
1971 * This is the first half of that workaround.
1972 *
1973 * Refers to:
1974 *
1975 * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
1976 * core send LGO_Ux entering U0
1977 */
1978 if (dwc->revision < DWC3_REVISION_183A) {
1979 if (next == DWC3_LINK_STATE_U0) {
1980 u32 u1u2;
1981 u32 reg;
1982
1983 switch (dwc->link_state) {
1984 case DWC3_LINK_STATE_U1:
1985 case DWC3_LINK_STATE_U2:
1986 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1987 u1u2 = reg & (DWC3_DCTL_INITU2ENA
1988 | DWC3_DCTL_ACCEPTU2ENA
1989 | DWC3_DCTL_INITU1ENA
1990 | DWC3_DCTL_ACCEPTU1ENA);
1991
1992 if (!dwc->u1u2)
1993 dwc->u1u2 = reg & u1u2;
1994
1995 reg &= ~u1u2;
1996
1997 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1998 break;
1999 default:
2000 /* do nothing */
2001 break;
2002 }
2003 }
2004 }
2005
2006 dwc->link_state = next;
2007
2008 dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
2009 }
2010
2011 static void dwc3_gadget_interrupt(struct dwc3 *dwc,
2012 const struct dwc3_event_devt *event)
2013 {
2014 switch (event->type) {
2015 case DWC3_DEVICE_EVENT_DISCONNECT:
2016 dwc3_gadget_disconnect_interrupt(dwc);
2017 break;
2018 case DWC3_DEVICE_EVENT_RESET:
2019 dwc3_gadget_reset_interrupt(dwc);
2020 break;
2021 case DWC3_DEVICE_EVENT_CONNECT_DONE:
2022 dwc3_gadget_conndone_interrupt(dwc);
2023 break;
2024 case DWC3_DEVICE_EVENT_WAKEUP:
2025 dwc3_gadget_wakeup_interrupt(dwc);
2026 break;
2027 case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
2028 dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
2029 break;
2030 case DWC3_DEVICE_EVENT_EOPF:
2031 dev_vdbg(dwc->dev, "End of Periodic Frame\n");
2032 break;
2033 case DWC3_DEVICE_EVENT_SOF:
2034 dev_vdbg(dwc->dev, "Start of Periodic Frame\n");
2035 break;
2036 case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
2037 dev_vdbg(dwc->dev, "Erratic Error\n");
2038 break;
2039 case DWC3_DEVICE_EVENT_CMD_CMPL:
2040 dev_vdbg(dwc->dev, "Command Complete\n");
2041 break;
2042 case DWC3_DEVICE_EVENT_OVERFLOW:
2043 dev_vdbg(dwc->dev, "Overflow\n");
2044 break;
2045 default:
2046 dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
2047 }
2048 }
2049
2050 static void dwc3_process_event_entry(struct dwc3 *dwc,
2051 const union dwc3_event *event)
2052 {
2053 /* Endpoint IRQ, handle it and return early */
2054 if (event->type.is_devspec == 0) {
2055 /* depevt */
2056 return dwc3_endpoint_interrupt(dwc, &event->depevt);
2057 }
2058
2059 switch (event->type.type) {
2060 case DWC3_EVENT_TYPE_DEV:
2061 dwc3_gadget_interrupt(dwc, &event->devt);
2062 break;
2063 /* REVISIT what to do with Carkit and I2C events ? */
2064 default:
2065 dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
2066 }
2067 }
2068
2069 static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
2070 {
2071 struct dwc3_event_buffer *evt;
2072 int left;
2073 u32 count;
2074
2075 count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
2076 count &= DWC3_GEVNTCOUNT_MASK;
2077 if (!count)
2078 return IRQ_NONE;
2079
2080 evt = dwc->ev_buffs[buf];
2081 left = count;
2082
2083 while (left > 0) {
2084 union dwc3_event event;
2085
2086 memcpy(&event.raw, (evt->buf + evt->lpos), sizeof(event.raw));
2087 dwc3_process_event_entry(dwc, &event);
2088 /*
2089 * XXX we wrap around correctly to the next entry as almost all
2090 * entries are 4 bytes in size. There is one entry which has 12
2091 * bytes which is a regular entry followed by 8 bytes data. ATM
2092 * I don't know how things are organized if were get next to the
2093 * a boundary so I worry about that once we try to handle that.
2094 */
2095 evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
2096 left -= 4;
2097
2098 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
2099 }
2100
2101 return IRQ_HANDLED;
2102 }
2103
2104 static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
2105 {
2106 struct dwc3 *dwc = _dwc;
2107 int i;
2108 irqreturn_t ret = IRQ_NONE;
2109
2110 spin_lock(&dwc->lock);
2111
2112 for (i = 0; i < dwc->num_event_buffers; i++) {
2113 irqreturn_t status;
2114
2115 status = dwc3_process_event_buf(dwc, i);
2116 if (status == IRQ_HANDLED)
2117 ret = status;
2118 }
2119
2120 spin_unlock(&dwc->lock);
2121
2122 return ret;
2123 }
2124
2125 /**
2126 * dwc3_gadget_init - Initializes gadget related registers
2127 * @dwc: Pointer to out controller context structure
2128 *
2129 * Returns 0 on success otherwise negative errno.
2130 */
2131 int __devinit dwc3_gadget_init(struct dwc3 *dwc)
2132 {
2133 u32 reg;
2134 int ret;
2135 int irq;
2136
2137 dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2138 &dwc->ctrl_req_addr, GFP_KERNEL);
2139 if (!dwc->ctrl_req) {
2140 dev_err(dwc->dev, "failed to allocate ctrl request\n");
2141 ret = -ENOMEM;
2142 goto err0;
2143 }
2144
2145 dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2146 &dwc->ep0_trb_addr, GFP_KERNEL);
2147 if (!dwc->ep0_trb) {
2148 dev_err(dwc->dev, "failed to allocate ep0 trb\n");
2149 ret = -ENOMEM;
2150 goto err1;
2151 }
2152
2153 dwc->setup_buf = dma_alloc_coherent(dwc->dev,
2154 sizeof(*dwc->setup_buf) * 2,
2155 &dwc->setup_buf_addr, GFP_KERNEL);
2156 if (!dwc->setup_buf) {
2157 dev_err(dwc->dev, "failed to allocate setup buffer\n");
2158 ret = -ENOMEM;
2159 goto err2;
2160 }
2161
2162 dwc->ep0_bounce = dma_alloc_coherent(dwc->dev,
2163 512, &dwc->ep0_bounce_addr, GFP_KERNEL);
2164 if (!dwc->ep0_bounce) {
2165 dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
2166 ret = -ENOMEM;
2167 goto err3;
2168 }
2169
2170 dev_set_name(&dwc->gadget.dev, "gadget");
2171
2172 dwc->gadget.ops = &dwc3_gadget_ops;
2173 dwc->gadget.max_speed = USB_SPEED_SUPER;
2174 dwc->gadget.speed = USB_SPEED_UNKNOWN;
2175 dwc->gadget.dev.parent = dwc->dev;
2176 dwc->gadget.sg_supported = true;
2177
2178 dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask);
2179
2180 dwc->gadget.dev.dma_parms = dwc->dev->dma_parms;
2181 dwc->gadget.dev.dma_mask = dwc->dev->dma_mask;
2182 dwc->gadget.dev.release = dwc3_gadget_release;
2183 dwc->gadget.name = "dwc3-gadget";
2184
2185 /*
2186 * REVISIT: Here we should clear all pending IRQs to be
2187 * sure we're starting from a well known location.
2188 */
2189
2190 ret = dwc3_gadget_init_endpoints(dwc);
2191 if (ret)
2192 goto err4;
2193
2194 irq = platform_get_irq(to_platform_device(dwc->dev), 0);
2195
2196 ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED,
2197 "dwc3", dwc);
2198 if (ret) {
2199 dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
2200 irq, ret);
2201 goto err5;
2202 }
2203
2204 /* Enable all but Start and End of Frame IRQs */
2205 reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
2206 DWC3_DEVTEN_EVNTOVERFLOWEN |
2207 DWC3_DEVTEN_CMDCMPLTEN |
2208 DWC3_DEVTEN_ERRTICERREN |
2209 DWC3_DEVTEN_WKUPEVTEN |
2210 DWC3_DEVTEN_ULSTCNGEN |
2211 DWC3_DEVTEN_CONNECTDONEEN |
2212 DWC3_DEVTEN_USBRSTEN |
2213 DWC3_DEVTEN_DISCONNEVTEN);
2214 dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
2215
2216 ret = device_register(&dwc->gadget.dev);
2217 if (ret) {
2218 dev_err(dwc->dev, "failed to register gadget device\n");
2219 put_device(&dwc->gadget.dev);
2220 goto err6;
2221 }
2222
2223 ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
2224 if (ret) {
2225 dev_err(dwc->dev, "failed to register udc\n");
2226 goto err7;
2227 }
2228
2229 return 0;
2230
2231 err7:
2232 device_unregister(&dwc->gadget.dev);
2233
2234 err6:
2235 dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
2236 free_irq(irq, dwc);
2237
2238 err5:
2239 dwc3_gadget_free_endpoints(dwc);
2240
2241 err4:
2242 dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
2243 dwc->ep0_bounce_addr);
2244
2245 err3:
2246 dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
2247 dwc->setup_buf, dwc->setup_buf_addr);
2248
2249 err2:
2250 dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2251 dwc->ep0_trb, dwc->ep0_trb_addr);
2252
2253 err1:
2254 dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2255 dwc->ctrl_req, dwc->ctrl_req_addr);
2256
2257 err0:
2258 return ret;
2259 }
2260
2261 void dwc3_gadget_exit(struct dwc3 *dwc)
2262 {
2263 int irq;
2264
2265 usb_del_gadget_udc(&dwc->gadget);
2266 irq = platform_get_irq(to_platform_device(dwc->dev), 0);
2267
2268 dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
2269 free_irq(irq, dwc);
2270
2271 dwc3_gadget_free_endpoints(dwc);
2272
2273 dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
2274 dwc->ep0_bounce_addr);
2275
2276 dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
2277 dwc->setup_buf, dwc->setup_buf_addr);
2278
2279 dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2280 dwc->ep0_trb, dwc->ep0_trb_addr);
2281
2282 dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2283 dwc->ctrl_req, dwc->ctrl_req_addr);
2284
2285 device_unregister(&dwc->gadget.dev);
2286 }
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree