ath5k: Wakeup fixes

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / ath / ath5k / reset.c

/*
 * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
 * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
 * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
 * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
 * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

#define _ATH5K_RESET

/*****************************\
  Reset functions and helpers
\*****************************/

#include <linux/pci.h>          /* To determine if a card is pci-e */
#include <linux/log2.h>
#include "ath5k.h"
#include "reg.h"
#include "base.h"
#include "debug.h"

/**
 * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
 *
 * @ah: the &struct ath5k_hw
 * @channel: the currently set channel upon reset
 *
 * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
 * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset().
 *
 * Since delta slope is floating point we split it on its exponent and
 * mantissa and provide these values on hw.
 *
 * For more infos i think this patent is related
 * http://www.freepatentsonline.com/7184495.html
 */
static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
        struct ieee80211_channel *channel)
{
        /* Get exponent and mantissa and set it */
        u32 coef_scaled, coef_exp, coef_man,
                ds_coef_exp, ds_coef_man, clock;

        BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
                !(channel->hw_value & CHANNEL_OFDM));

        /* Get coefficient
         * ALGO: coef = (5 * clock * carrier_freq) / 2)
         * we scale coef by shifting clock value by 24 for
         * better precision since we use integers */
        /* TODO: Half/quarter rate */
        clock =  ath5k_hw_htoclock(1, channel->hw_value & CHANNEL_TURBO);

        coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;

        /* Get exponent
         * ALGO: coef_exp = 14 - highest set bit position */
        coef_exp = ilog2(coef_scaled);

        /* Doesn't make sense if it's zero*/
        if (!coef_scaled || !coef_exp)
                return -EINVAL;

        /* Note: we've shifted coef_scaled by 24 */
        coef_exp = 14 - (coef_exp - 24);


        /* Get mantissa (significant digits)
         * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
        coef_man = coef_scaled +
                (1 << (24 - coef_exp - 1));

        /* Calculate delta slope coefficient exponent
         * and mantissa (remove scaling) and set them on hw */
        ds_coef_man = coef_man >> (24 - coef_exp);
        ds_coef_exp = coef_exp - 16;

        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
                AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
                AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);

        return 0;
}


/*
 * index into rates for control rates, we can set it up like this because
 * this is only used for AR5212 and we know it supports G mode
 */
static const unsigned int control_rates[] =
        { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };

/**
 * ath5k_hw_write_rate_duration - fill rate code to duration table
 *
 * @ah: the &struct ath5k_hw
 * @mode: one of enum ath5k_driver_mode
 *
 * Write the rate code to duration table upon hw reset. This is a helper for
 * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on
 * the hardware, based on current mode, for each rate. The rates which are
 * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
 * different rate code so we write their value twice (one for long preample
 * and one for short).
 *
 * Note: Band doesn't matter here, if we set the values for OFDM it works
 * on both a and g modes. So all we have to do is set values for all g rates
 * that include all OFDM and CCK rates. If we operate in turbo or xr/half/
 * quarter rate mode, we need to use another set of bitrates (that's why we
 * need the mode parameter) but we don't handle these proprietary modes yet.
 */
static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
       unsigned int mode)
{
        struct ath5k_softc *sc = ah->ah_sc;
        struct ieee80211_rate *rate;
        unsigned int i;

        /* Write rate duration table */
        for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
                u32 reg;
                u16 tx_time;

                rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];

                /* Set ACK timeout */
                reg = AR5K_RATE_DUR(rate->hw_value);

                /* An ACK frame consists of 10 bytes. If you add the FCS,
                 * which ieee80211_generic_frame_duration() adds,
                 * its 14 bytes. Note we use the control rate and not the
                 * actual rate for this rate. See mac80211 tx.c
                 * ieee80211_duration() for a brief description of
                 * what rate we should choose to TX ACKs. */
                tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
                                                        sc->vif, 10, rate));

                ath5k_hw_reg_write(ah, tx_time, reg);

                if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
                        continue;

                /*
                 * We're not distinguishing short preamble here,
                 * This is true, all we'll get is a longer value here
                 * which is not necessarilly bad. We could use
                 * export ieee80211_frame_duration() but that needs to be
                 * fixed first to be properly used by mac802111 drivers:
                 *
                 *  - remove erp stuff and let the routine figure ofdm
                 *    erp rates
                 *  - remove passing argument ieee80211_local as
                 *    drivers don't have access to it
                 *  - move drivers using ieee80211_generic_frame_duration()
                 *    to this
                 */
                ath5k_hw_reg_write(ah, tx_time,
                        reg + (AR5K_SET_SHORT_PREAMBLE << 2));
        }
}

/*
 * Reset chipset
 */
static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
{
        int ret;
        u32 mask = val ? val : ~0U;

        ATH5K_TRACE(ah->ah_sc);

        /* Read-and-clear RX Descriptor Pointer*/
        ath5k_hw_reg_read(ah, AR5K_RXDP);

        /*
         * Reset the device and wait until success
         */
        ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);

        /* Wait at least 128 PCI clocks */
        udelay(15);

        if (ah->ah_version == AR5K_AR5210) {
                val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
                        | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
                mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
                        | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
        } else {
                val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
                mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
        }

        ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);

        /*
         * Reset configuration register (for hw byte-swap). Note that this
         * is only set for big endian. We do the necessary magic in
         * AR5K_INIT_CFG.
         */
        if ((val & AR5K_RESET_CTL_PCU) == 0)
                ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);

        return ret;
}

/*
 * Sleep control
 */
int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
                bool set_chip, u16 sleep_duration)
{
        unsigned int i;
        u32 staid, data;

        ATH5K_TRACE(ah->ah_sc);
        staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);

        switch (mode) {
        case AR5K_PM_AUTO:
                staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
                /* fallthrough */
        case AR5K_PM_NETWORK_SLEEP:
                if (set_chip)
                        ath5k_hw_reg_write(ah,
                                AR5K_SLEEP_CTL_SLE_ALLOW |
                                sleep_duration,
                                AR5K_SLEEP_CTL);

                staid |= AR5K_STA_ID1_PWR_SV;
                break;

        case AR5K_PM_FULL_SLEEP:
                if (set_chip)
                        ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
                                AR5K_SLEEP_CTL);

                staid |= AR5K_STA_ID1_PWR_SV;
                break;

        case AR5K_PM_AWAKE:

                staid &= ~AR5K_STA_ID1_PWR_SV;

                if (!set_chip)
                        goto commit;

                data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);

                /* If card is down we 'll get 0xffff... so we
                 * need to clean this up before we write the register
                 */
                if (data & 0xffc00000)
                        data = 0;
                else
                        /* Preserve sleep duration etc */
                        data = data & ~AR5K_SLEEP_CTL_SLE;

                ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
                                                        AR5K_SLEEP_CTL);
                udelay(15);

                for (i = 200; i > 0; i--) {
                        /* Check if the chip did wake up */
                        if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
                                        AR5K_PCICFG_SPWR_DN) == 0)
                                break;

                        /* Wait a bit and retry */
                        udelay(50);
                        ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
                                                        AR5K_SLEEP_CTL);
                }

                /* Fail if the chip didn't wake up */
                if (i == 0)
                        return -EIO;

                break;

        default:
                return -EINVAL;
        }

commit:
        ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);

        return 0;
}

/*
 * Put device on hold
 *
 * Put MAC and Baseband on warm reset and
 * keep that state (don't clean sleep control
 * register). After this MAC and Baseband are
 * disabled and a full reset is needed to come
 * back. This way we save as much power as possible
 * without puting the card on full sleep.
 */
int ath5k_hw_on_hold(struct ath5k_hw *ah)
{
        struct pci_dev *pdev = ah->ah_sc->pdev;
        u32 bus_flags;
        int ret;

        /* Make sure device is awake */
        ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
        if (ret) {
                ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
                return ret;
        }

        /*
         * Put chipset on warm reset...
         *
         * Note: puting PCI core on warm reset on PCI-E cards
         * results card to hang and always return 0xffff... so
         * we ingore that flag for PCI-E cards. On PCI cards
         * this flag gets cleared after 64 PCI clocks.
         */
        bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;

        if (ah->ah_version == AR5K_AR5210) {
                ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
                        AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
                        AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
                        mdelay(2);
        } else {
                ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
                        AR5K_RESET_CTL_BASEBAND | bus_flags);
        }

        if (ret) {
                ATH5K_ERR(ah->ah_sc, "failed to put device on warm reset\n");
                return -EIO;
        }

        /* ...wakeup again!*/
        ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
        if (ret) {
                ATH5K_ERR(ah->ah_sc, "failed to put device on hold\n");
                return ret;
        }

        return ret;
}

/*
 * Bring up MAC + PHY Chips and program PLL
 * TODO: Half/Quarter rate support
 */
int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
{
        struct pci_dev *pdev = ah->ah_sc->pdev;
        u32 turbo, mode, clock, bus_flags;
        int ret;

        turbo = 0;
        mode = 0;
        clock = 0;

        ATH5K_TRACE(ah->ah_sc);

        /* Wakeup the device */
        ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
        if (ret) {
                ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
                return ret;
        }

        /*
         * Put chipset on warm reset...
         *
         * Note: puting PCI core on warm reset on PCI-E cards
         * results card to hang and always return 0xffff... so
         * we ingore that flag for PCI-E cards. On PCI cards
         * this flag gets cleared after 64 PCI clocks.
         */
        bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;

        if (ah->ah_version == AR5K_AR5210) {
                ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
                        AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
                        AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
                        mdelay(2);
        } else {
                ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
                        AR5K_RESET_CTL_BASEBAND | bus_flags);
        }

        if (ret) {
                ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
                return -EIO;
        }

        /* ...wakeup again!...*/
        ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
        if (ret) {
                ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
                return ret;
        }

        /* ...clear reset control register and pull device out of
         * warm reset */
        if (ath5k_hw_nic_reset(ah, 0)) {
                ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
                return -EIO;
        }

        /* On initialization skip PLL programming since we don't have
         * a channel / mode set yet */
        if (initial)
                return 0;

        if (ah->ah_version != AR5K_AR5210) {
                /*
                 * Get channel mode flags
                 */

                if (ah->ah_radio >= AR5K_RF5112) {
                        mode = AR5K_PHY_MODE_RAD_RF5112;
                        clock = AR5K_PHY_PLL_RF5112;
                } else {
                        mode = AR5K_PHY_MODE_RAD_RF5111;        /*Zero*/
                        clock = AR5K_PHY_PLL_RF5111;            /*Zero*/
                }

                if (flags & CHANNEL_2GHZ) {
                        mode |= AR5K_PHY_MODE_FREQ_2GHZ;
                        clock |= AR5K_PHY_PLL_44MHZ;

                        if (flags & CHANNEL_CCK) {
                                mode |= AR5K_PHY_MODE_MOD_CCK;
                        } else if (flags & CHANNEL_OFDM) {
                                /* XXX Dynamic OFDM/CCK is not supported by the
                                 * AR5211 so we set MOD_OFDM for plain g (no
                                 * CCK headers) operation. We need to test
                                 * this, 5211 might support ofdm-only g after
                                 * all, there are also initial register values
                                 * in the code for g mode (see initvals.c). */
                                if (ah->ah_version == AR5K_AR5211)
                                        mode |= AR5K_PHY_MODE_MOD_OFDM;
                                else
                                        mode |= AR5K_PHY_MODE_MOD_DYN;
                        } else {
                                ATH5K_ERR(ah->ah_sc,
                                        "invalid radio modulation mode\n");
                                return -EINVAL;
                        }
                } else if (flags & CHANNEL_5GHZ) {
                        mode |= AR5K_PHY_MODE_FREQ_5GHZ;

                        if (ah->ah_radio == AR5K_RF5413)
                                clock = AR5K_PHY_PLL_40MHZ_5413;
                        else
                                clock |= AR5K_PHY_PLL_40MHZ;

                        if (flags & CHANNEL_OFDM)
                                mode |= AR5K_PHY_MODE_MOD_OFDM;
                        else {
                                ATH5K_ERR(ah->ah_sc,
                                        "invalid radio modulation mode\n");
                                return -EINVAL;
                        }
                } else {
                        ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
                        return -EINVAL;
                }

                if (flags & CHANNEL_TURBO)
                        turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
        } else { /* Reset the device */

                /* ...enable Atheros turbo mode if requested */
                if (flags & CHANNEL_TURBO)
                        ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
                                        AR5K_PHY_TURBO);
        }

        if (ah->ah_version != AR5K_AR5210) {

                /* ...update PLL if needed */
                if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
                        ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
                        udelay(300);
                }

                /* ...set the PHY operating mode */
                ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
                ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
        }

        return 0;
}

/*
 * If there is an external 32KHz crystal available, use it
 * as ref. clock instead of 32/40MHz clock and baseband clocks
 * to save power during sleep or restore normal 32/40MHz
 * operation.
 *
 * XXX: When operating on 32KHz certain PHY registers (27 - 31,
 *      123 - 127) require delay on access.
 */
static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
{
        struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
        u32 scal, spending, usec32;

        /* Only set 32KHz settings if we have an external
         * 32KHz crystal present */
        if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
        AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
        enable) {

                /* 1 usec/cycle */
                AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
                /* Set up tsf increment on each cycle */
                AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);

                /* Set baseband sleep control registers
                 * and sleep control rate */
                ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);

                if ((ah->ah_radio == AR5K_RF5112) ||
                (ah->ah_radio == AR5K_RF5413) ||
                (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
                        spending = 0x14;
                else
                        spending = 0x18;
                ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);

                if ((ah->ah_radio == AR5K_RF5112) ||
                (ah->ah_radio == AR5K_RF5413) ||
                (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
                        ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
                        ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
                        ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
                        ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
                        AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
                                AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
                } else {
                        ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
                        ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
                        ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
                        ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
                        AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
                                AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
                }

                /* Enable sleep clock operation */
                AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
                                AR5K_PCICFG_SLEEP_CLOCK_EN);

        } else {

                /* Disable sleep clock operation and
                 * restore default parameters */
                AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
                                AR5K_PCICFG_SLEEP_CLOCK_EN);

                AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
                                AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);

                ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
                ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);

                if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
                        scal = AR5K_PHY_SCAL_32MHZ_2417;
                else if (ee->ee_is_hb63)
                        scal = AR5K_PHY_SCAL_32MHZ_HB63;
                else
                        scal = AR5K_PHY_SCAL_32MHZ;
                ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);

                ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
                ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);

                if ((ah->ah_radio == AR5K_RF5112) ||
                (ah->ah_radio == AR5K_RF5413) ||
                (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
                        spending = 0x14;
                else
                        spending = 0x18;
                ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);

                if ((ah->ah_radio == AR5K_RF5112) ||
                (ah->ah_radio == AR5K_RF5413))
                        usec32 = 39;
                else
                        usec32 = 31;
                AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32);

                AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
        }
        return;
}

/* TODO: Half/Quarter rate */
static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
                                struct ieee80211_channel *channel)
{
        if (ah->ah_version == AR5K_AR5212 &&
            ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {

                /* Setup ADC control */
                ath5k_hw_reg_write(ah,
                                (AR5K_REG_SM(2,
                                AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) |
                                AR5K_REG_SM(2,
                                AR5K_PHY_ADC_CTL_INBUFGAIN_ON) |
                                AR5K_PHY_ADC_CTL_PWD_DAC_OFF |
                                AR5K_PHY_ADC_CTL_PWD_ADC_OFF),
                                AR5K_PHY_ADC_CTL);



                /* Disable barker RSSI threshold */
                AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
                                AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR);

                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
                        AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2);

                /* Set the mute mask */
                ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
        }

        /* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */
        if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B)
                ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH);

        /* Enable DCU double buffering */
        if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B)
                AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
                                AR5K_TXCFG_DCU_DBL_BUF_DIS);

        /* Set DAC/ADC delays */
        if (ah->ah_version == AR5K_AR5212) {
                u32 scal;
                struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
                if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
                        scal = AR5K_PHY_SCAL_32MHZ_2417;
                else if (ee->ee_is_hb63)
                        scal = AR5K_PHY_SCAL_32MHZ_HB63;
                else
                        scal = AR5K_PHY_SCAL_32MHZ;
                ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
        }

        /* Set fast ADC */
        if ((ah->ah_radio == AR5K_RF5413) ||
        (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
                u32 fast_adc = true;

                if (channel->center_freq == 2462 ||
                channel->center_freq == 2467)
                        fast_adc = 0;

                /* Only update if needed */
                if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc)
                                ath5k_hw_reg_write(ah, fast_adc,
                                                AR5K_PHY_FAST_ADC);
        }

        /* Fix for first revision of the RF5112 RF chipset */
        if (ah->ah_radio == AR5K_RF5112 &&
                        ah->ah_radio_5ghz_revision <
                        AR5K_SREV_RAD_5112A) {
                u32 data;
                ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
                                AR5K_PHY_CCKTXCTL);
                if (channel->hw_value & CHANNEL_5GHZ)
                        data = 0xffb81020;
                else
                        data = 0xffb80d20;
                ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
        }

        if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
                u32 usec_reg;
                /* 5311 has different tx/rx latency masks
                 * from 5211, since we deal 5311 the same
                 * as 5211 when setting initvals, shift
                 * values here to their proper locations */
                usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
                ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 |
                                AR5K_USEC_32 |
                                AR5K_USEC_TX_LATENCY_5211 |
                                AR5K_REG_SM(29,
                                AR5K_USEC_RX_LATENCY_5210)),
                                AR5K_USEC_5211);
                /* Clear QCU/DCU clock gating register */
                ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
                /* Set DAC/ADC delays */
                ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL);
                /* Enable PCU FIFO corruption ECO */
                AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
                                        AR5K_DIAG_SW_ECO_ENABLE);
        }
}

static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
                struct ieee80211_channel *channel, u8 *ant, u8 ee_mode)
{
        struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
        s16 cck_ofdm_pwr_delta;

        /* Adjust power delta for channel 14 */
        if (channel->center_freq == 2484)
                cck_ofdm_pwr_delta =
                        ((ee->ee_cck_ofdm_power_delta -
                        ee->ee_scaled_cck_delta) * 2) / 10;
        else
                cck_ofdm_pwr_delta =
                        (ee->ee_cck_ofdm_power_delta * 2) / 10;

        /* Set CCK to OFDM power delta on tx power
         * adjustment register */
        if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
                if (channel->hw_value == CHANNEL_G)
                        ath5k_hw_reg_write(ah,
                        AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1),
                                AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
                        AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
                                AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
                                AR5K_PHY_TX_PWR_ADJ);
                else
                        ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
        } else {
                /* For older revs we scale power on sw during tx power
                 * setup */
                ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta;
                ah->ah_txpower.txp_cck_ofdm_gainf_delta =
                                                ee->ee_cck_ofdm_gain_delta;
        }

        /* Set antenna idle switch table */
        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
                        AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
                        (ah->ah_ant_ctl[ee_mode][0] |
                        AR5K_PHY_ANT_CTL_TXRX_EN));

        /* Set antenna switch tables */
        ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[0]],
                AR5K_PHY_ANT_SWITCH_TABLE_0);
        ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[1]],
                AR5K_PHY_ANT_SWITCH_TABLE_1);

        /* Noise floor threshold */
        ath5k_hw_reg_write(ah,
                AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
                AR5K_PHY_NFTHRES);

        if ((channel->hw_value & CHANNEL_TURBO) &&
        (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
                /* Switch settling time (Turbo) */
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
                                AR5K_PHY_SETTLING_SWITCH,
                                ee->ee_switch_settling_turbo[ee_mode]);

                /* Tx/Rx attenuation (Turbo) */
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
                                AR5K_PHY_GAIN_TXRX_ATTEN,
                                ee->ee_atn_tx_rx_turbo[ee_mode]);

                /* ADC/PGA desired size (Turbo) */
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
                                AR5K_PHY_DESIRED_SIZE_ADC,
                                ee->ee_adc_desired_size_turbo[ee_mode]);

                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
                                AR5K_PHY_DESIRED_SIZE_PGA,
                                ee->ee_pga_desired_size_turbo[ee_mode]);

                /* Tx/Rx margin (Turbo) */
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
                                AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
                                ee->ee_margin_tx_rx_turbo[ee_mode]);

        } else {
                /* Switch settling time */
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
                                AR5K_PHY_SETTLING_SWITCH,
                                ee->ee_switch_settling[ee_mode]);

                /* Tx/Rx attenuation */
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
                                AR5K_PHY_GAIN_TXRX_ATTEN,
                                ee->ee_atn_tx_rx[ee_mode]);

                /* ADC/PGA desired size */
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
                                AR5K_PHY_DESIRED_SIZE_ADC,
                                ee->ee_adc_desired_size[ee_mode]);

                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
                                AR5K_PHY_DESIRED_SIZE_PGA,
                                ee->ee_pga_desired_size[ee_mode]);

                /* Tx/Rx margin */
                if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
                        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
                                AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
                                ee->ee_margin_tx_rx[ee_mode]);
        }

        /* XPA delays */
        ath5k_hw_reg_write(ah,
                (ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
                (ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
                (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
                (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);

        /* XLNA delay */
        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3,
                        AR5K_PHY_RF_CTL3_TXE2XLNA_ON,
                        ee->ee_tx_end2xlna_enable[ee_mode]);

        /* Thresh64 (ANI) */
        AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF,
                        AR5K_PHY_NF_THRESH62,
                        ee->ee_thr_62[ee_mode]);


        /* False detect backoff for channels
         * that have spur noise. Write the new
         * cyclic power RSSI threshold. */
        if (ath5k_hw_chan_has_spur_noise(ah, channel))
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
                                AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
                                AR5K_INIT_CYCRSSI_THR1 +
                                ee->ee_false_detect[ee_mode]);
        else
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
                                AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
                                AR5K_INIT_CYCRSSI_THR1);

        /* I/Q correction
         * TODO: Per channel i/q infos ? */
        AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
                AR5K_PHY_IQ_CORR_ENABLE |
                (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
                ee->ee_q_cal[ee_mode]);

        /* Heavy clipping -disable for now */
        if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
                ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);

        return;
}

/*
 * Main reset function
 */
int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
        struct ieee80211_channel *channel, bool change_channel)
{
        u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
        u32 phy_tst1;
        u8 mode, freq, ee_mode, ant[2];
        int i, ret;

        ATH5K_TRACE(ah->ah_sc);

        s_ant = 0;
        ee_mode = 0;
        staid1_flags = 0;
        tsf_up = 0;
        tsf_lo = 0;
        freq = 0;
        mode = 0;

        /*
         * Save some registers before a reset
         */
        /*DCU/Antenna selection not available on 5210*/
        if (ah->ah_version != AR5K_AR5210) {

                switch (channel->hw_value & CHANNEL_MODES) {
                case CHANNEL_A:
                        mode = AR5K_MODE_11A;
                        freq = AR5K_INI_RFGAIN_5GHZ;
                        ee_mode = AR5K_EEPROM_MODE_11A;
                        break;
                case CHANNEL_G:
                        mode = AR5K_MODE_11G;
                        freq = AR5K_INI_RFGAIN_2GHZ;
                        ee_mode = AR5K_EEPROM_MODE_11G;
                        break;
                case CHANNEL_B:
                        mode = AR5K_MODE_11B;
                        freq = AR5K_INI_RFGAIN_2GHZ;
                        ee_mode = AR5K_EEPROM_MODE_11B;
                        break;
                case CHANNEL_T:
                        mode = AR5K_MODE_11A_TURBO;
                        freq = AR5K_INI_RFGAIN_5GHZ;
                        ee_mode = AR5K_EEPROM_MODE_11A;
                        break;
                case CHANNEL_TG:
                        if (ah->ah_version == AR5K_AR5211) {
                                ATH5K_ERR(ah->ah_sc,
                                        "TurboG mode not available on 5211");
                                return -EINVAL;
                        }
                        mode = AR5K_MODE_11G_TURBO;
                        freq = AR5K_INI_RFGAIN_2GHZ;
                        ee_mode = AR5K_EEPROM_MODE_11G;
                        break;
                case CHANNEL_XR:
                        if (ah->ah_version == AR5K_AR5211) {
                                ATH5K_ERR(ah->ah_sc,
                                        "XR mode not available on 5211");
                                return -EINVAL;
                        }
                        mode = AR5K_MODE_XR;
                        freq = AR5K_INI_RFGAIN_5GHZ;
                        ee_mode = AR5K_EEPROM_MODE_11A;
                        break;
                default:
                        ATH5K_ERR(ah->ah_sc,
                                "invalid channel: %d\n", channel->center_freq);
                        return -EINVAL;
                }

                if (change_channel) {
                        /*
                         * Save frame sequence count
                         * For revs. after Oahu, only save
                         * seq num for DCU 0 (Global seq num)
                         */
                        if (ah->ah_mac_srev < AR5K_SREV_AR5211) {

                                for (i = 0; i < 10; i++)
                                        s_seq[i] = ath5k_hw_reg_read(ah,
                                                AR5K_QUEUE_DCU_SEQNUM(i));

                        } else {
                                s_seq[0] = ath5k_hw_reg_read(ah,
                                                AR5K_QUEUE_DCU_SEQNUM(0));
                        }

                        /* TSF accelerates on AR5211 durring reset
                         * As a workaround save it here and restore
                         * it later so that it's back in time after
                         * reset. This way it'll get re-synced on the
                         * next beacon without breaking ad-hoc.
                         *
                         * On AR5212 TSF is almost preserved across a
                         * reset so it stays back in time anyway and
                         * we don't have to save/restore it.
                         *
                         * XXX: Since this breaks power saving we have
                         * to disable power saving until we receive the
                         * next beacon, so we can resync beacon timers */
                        if (ah->ah_version == AR5K_AR5211) {
                                tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
                                tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
                        }
                }

                /* Save default antenna */
                s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);

                if (ah->ah_version == AR5K_AR5212) {
                        /* Restore normal 32/40MHz clock operation
                         * to avoid register access delay on certain
                         * PHY registers */
                        ath5k_hw_set_sleep_clock(ah, false);

                        /* Since we are going to write rf buffer
                         * check if we have any pending gain_F
                         * optimization settings */
                        if (change_channel && ah->ah_rf_banks != NULL)
                                ath5k_hw_gainf_calibrate(ah);
                }
        }

        /*GPIOs*/
        s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
                                        AR5K_PCICFG_LEDSTATE;
        s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
        s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);

        /* AR5K_STA_ID1 flags, only preserve antenna
         * settings and ack/cts rate mode */
        staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) &
                        (AR5K_STA_ID1_DEFAULT_ANTENNA |
                        AR5K_STA_ID1_DESC_ANTENNA |
                        AR5K_STA_ID1_RTS_DEF_ANTENNA |
                        AR5K_STA_ID1_ACKCTS_6MB |
                        AR5K_STA_ID1_BASE_RATE_11B |
                        AR5K_STA_ID1_SELFGEN_DEF_ANT);

        /* Wakeup the device */
        ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
        if (ret)
                return ret;

        /*
         * Initialize operating mode
         */
        ah->ah_op_mode = op_mode;

        /* PHY access enable */
        if (ah->ah_mac_srev >= AR5K_SREV_AR5211)
                ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
        else
                ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40,
                                                        AR5K_PHY(0));

        /* Write initial settings */
        ret = ath5k_hw_write_initvals(ah, mode, change_channel);
        if (ret)
                return ret;

        /*
         * 5211/5212 Specific
         */
        if (ah->ah_version != AR5K_AR5210) {

                /*
                 * Write initial RF gain settings
                 * This should work for both 5111/5112
                 */
                ret = ath5k_hw_rfgain_init(ah, freq);
                if (ret)
                        return ret;

                mdelay(1);

                /*
                 * Tweak initval settings for revised
                 * chipsets and add some more config
                 * bits
                 */
                ath5k_hw_tweak_initval_settings(ah, channel);

                /*
                 * Set TX power
                 */
                ret = ath5k_hw_txpower(ah, channel, ee_mode,
                                        ah->ah_txpower.txp_max_pwr / 2);
                if (ret)
                        return ret;

                /* Write rate duration table only on AR5212 and if
                 * virtual interface has already been brought up
                 * XXX: rethink this after new mode changes to
                 * mac80211 are integrated */
                if (ah->ah_version == AR5K_AR5212 &&
                        ah->ah_sc->vif != NULL)
                        ath5k_hw_write_rate_duration(ah, mode);

                /*
                 * Write RF buffer
                 */
                ret = ath5k_hw_rfregs_init(ah, channel, mode);
                if (ret)
                        return ret;


                /* Write OFDM timings on 5212*/
                if (ah->ah_version == AR5K_AR5212 &&
                        channel->hw_value & CHANNEL_OFDM) {
                        struct ath5k_eeprom_info *ee =
                                        &ah->ah_capabilities.cap_eeprom;

                        ret = ath5k_hw_write_ofdm_timings(ah, channel);
                        if (ret)
                                return ret;

                        /* Note: According to docs we can have a newer
                         * EEPROM on old hardware, so we need to verify
                         * that our hardware is new enough to have spur
                         * mitigation registers (delta phase etc) */
                        if (ah->ah_mac_srev >= AR5K_SREV_AR5424 ||
                        (ah->ah_mac_srev >= AR5K_SREV_AR5424 &&
                        ee->ee_version >= AR5K_EEPROM_VERSION_5_3))
                                ath5k_hw_set_spur_mitigation_filter(ah,
                                                                channel);
                }

                /*Enable/disable 802.11b mode on 5111
                (enable 2111 frequency converter + CCK)*/
                if (ah->ah_radio == AR5K_RF5111) {
                        if (mode == AR5K_MODE_11B)
                                AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
                                    AR5K_TXCFG_B_MODE);
                        else
                                AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
                                    AR5K_TXCFG_B_MODE);
                }

                /*
                 * In case a fixed antenna was set as default
                 * use the same switch table twice.
                 */
                if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A)
                                ant[0] = ant[1] = AR5K_ANT_SWTABLE_A;
                else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B)
                                ant[0] = ant[1] = AR5K_ANT_SWTABLE_B;
                else {
                        ant[0] = AR5K_ANT_SWTABLE_A;
                        ant[1] = AR5K_ANT_SWTABLE_B;
                }

                /* Commit values from EEPROM */
                ath5k_hw_commit_eeprom_settings(ah, channel, ant, ee_mode);

        } else {
                /*
                 * For 5210 we do all initialization using
                 * initvals, so we don't have to modify
                 * any settings (5210 also only supports
                 * a/aturbo modes)
                 */
                mdelay(1);
                /* Disable phy and wait */
                ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
                mdelay(1);
        }

        /*
         * Restore saved values
         */

        /*DCU/Antenna selection not available on 5210*/
        if (ah->ah_version != AR5K_AR5210) {

                if (change_channel) {
                        if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
                                for (i = 0; i < 10; i++)
                                        ath5k_hw_reg_write(ah, s_seq[i],
                                                AR5K_QUEUE_DCU_SEQNUM(i));
                        } else {
                                ath5k_hw_reg_write(ah, s_seq[0],
                                        AR5K_QUEUE_DCU_SEQNUM(0));
                        }


                        if (ah->ah_version == AR5K_AR5211) {
                                ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
                                ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
                        }
                }

                ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
        }

        /* Ledstate */
        AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);

        /* Gpio settings */
        ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
        ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);

        /* Restore sta_id flags and preserve our mac address*/
        ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id),
                                                AR5K_STA_ID0);
        ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id),
                                                AR5K_STA_ID1);


        /*
         * Configure PCU
         */

        /* Restore bssid and bssid mask */
        /* XXX: add ah->aid once mac80211 gives this to us */
        ath5k_hw_set_associd(ah, ah->ah_bssid, 0);

        /* Set PCU config */
        ath5k_hw_set_opmode(ah);

        /* Clear any pending interrupts
         * PISR/SISR Not available on 5210 */
        if (ah->ah_version != AR5K_AR5210)
                ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);

        /* Set RSSI/BRSSI thresholds
         *
         * Note: If we decide to set this value
         * dynamicaly, have in mind that when AR5K_RSSI_THR
         * register is read it might return 0x40 if we haven't
         * wrote anything to it plus BMISS RSSI threshold is zeroed.
         * So doing a save/restore procedure here isn't the right
         * choice. Instead store it on ath5k_hw */
        ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
                                AR5K_TUNE_BMISS_THRES <<
                                AR5K_RSSI_THR_BMISS_S),
                                AR5K_RSSI_THR);

        /* MIC QoS support */
        if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
                ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
                ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
        }

        /* QoS NOACK Policy */
        if (ah->ah_version == AR5K_AR5212) {
                ath5k_hw_reg_write(ah,
                        AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
                        AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET)  |
                        AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
                        AR5K_QOS_NOACK);
        }


        /*
         * Configure PHY
         */

        /* Set channel on PHY */
        ret = ath5k_hw_channel(ah, channel);
        if (ret)
                return ret;

        /*
         * Enable the PHY and wait until completion
         * This includes BaseBand and Synthesizer
         * activation.
         */
        ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);

        /*
         * On 5211+ read activation -> rx delay
         * and use it.
         *
         * TODO: Half/quarter rate support
         */
        if (ah->ah_version != AR5K_AR5210) {
                u32 delay;
                delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
                        AR5K_PHY_RX_DELAY_M;
                delay = (channel->hw_value & CHANNEL_CCK) ?
                        ((delay << 2) / 22) : (delay / 10);

                udelay(100 + (2 * delay));
        } else {
                mdelay(1);
        }

        /*
         * Perform ADC test to see if baseband is ready
         * Set tx hold and check adc test register
         */
        phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
        ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
        for (i = 0; i <= 20; i++) {
                if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
                        break;
                udelay(200);
        }
        ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);

        /*
         * Start automatic gain control calibration
         *
         * During AGC calibration RX path is re-routed to
         * a power detector so we don't receive anything.
         *
         * This method is used to calibrate some static offsets
         * used together with on-the fly I/Q calibration (the
         * one performed via ath5k_hw_phy_calibrate), that doesn't
         * interrupt rx path.
         *
         * While rx path is re-routed to the power detector we also
         * start a noise floor calibration, to measure the
         * card's noise floor (the noise we measure when we are not
         * transmiting or receiving anything).
         *
         * If we are in a noisy environment AGC calibration may time
         * out and/or noise floor calibration might timeout.
         */
        AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
                                AR5K_PHY_AGCCTL_CAL);

        /* At the same time start I/Q calibration for QAM constellation
         * -no need for CCK- */
        ah->ah_calibration = false;
        if (!(mode == AR5K_MODE_11B)) {
                ah->ah_calibration = true;
                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
                                AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
                AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
                                AR5K_PHY_IQ_RUN);
        }

        /* Wait for gain calibration to finish (we check for I/Q calibration
         * during ath5k_phy_calibrate) */
        if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
                        AR5K_PHY_AGCCTL_CAL, 0, false)) {
                ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
                        channel->center_freq);
        }

        /*
         * If we run NF calibration before AGC, it always times out.
         * Binary HAL starts NF and AGC calibration at the same time
         * and only waits for AGC to finish. Also if AGC or NF cal.
         * times out, reset doesn't fail on binary HAL. I believe
         * that's wrong because since rx path is routed to a detector,
         * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
         * enables noise floor calibration after offset calibration and if noise
         * floor calibration fails, reset fails. I believe that's
         * a better approach, we just need to find a polling interval
         * that suits best, even if reset continues we need to make
         * sure that rx path is ready.
         */
        ath5k_hw_noise_floor_calibration(ah, channel->center_freq);

        /* Restore antenna mode */
        ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);

        /*
         * Configure QCUs/DCUs
         */

        /* TODO: HW Compression support for data queues */
        /* TODO: Burst prefetch for data queues */

        /*
         * Reset queues and start beacon timers at the end of the reset routine
         * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
         * Note: If we want we can assign multiple qcus on one dcu.
         */
        for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
                ret = ath5k_hw_reset_tx_queue(ah, i);
                if (ret) {
                        ATH5K_ERR(ah->ah_sc,
                                "failed to reset TX queue #%d\n", i);
                        return ret;
                }
        }


        /*
         * Configure DMA/Interrupts
         */

        /*
         * Set Rx/Tx DMA Configuration
         *
         * Set standard DMA size (128). Note that
         * a DMA size of 512 causes rx overruns and tx errors
         * on pci-e cards (tested on 5424 but since rx overruns
         * also occur on 5416/5418 with madwifi we set 128
         * for all PCI-E cards to be safe).
         *
         * XXX: need to check 5210 for this
         * TODO: Check out tx triger level, it's always 64 on dumps but I
         * guess we can tweak it and see how it goes ;-)
         */
        if (ah->ah_version != AR5K_AR5210) {
                AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
                        AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
                AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
                        AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
        }

        /* Pre-enable interrupts on 5211/5212*/
        if (ah->ah_version != AR5K_AR5210)
                ath5k_hw_set_imr(ah, ah->ah_imr);

        /* Enable 32KHz clock function for AR5212+ chips
         * Set clocks to 32KHz operation and use an
         * external 32KHz crystal when sleeping if one
         * exists */
        if (ah->ah_version == AR5K_AR5212)
                        ath5k_hw_set_sleep_clock(ah, true);

        /*
         * Disable beacons and reset the register
         */
        AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
                        AR5K_BEACON_RESET_TSF);

        return 0;
}

#undef _ATH5K_RESET