arch/arm/mach-omap2/mux.h

   1 /*
   2  * Copyright (C) 2009 Nokia
   3  * Copyright (C) 2009 Texas Instruments
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  */
   9
  10 #include "mux34xx.h"
  11
  12 #define OMAP_MUX_TERMINATOR     0xffff
  13
  14 /* 34xx mux mode options for each pin. See TRM for options */
  15 #define OMAP_MUX_MODE0      0
  16 #define OMAP_MUX_MODE1      1
  17 #define OMAP_MUX_MODE2      2
  18 #define OMAP_MUX_MODE3      3
  19 #define OMAP_MUX_MODE4      4
  20 #define OMAP_MUX_MODE5      5
  21 #define OMAP_MUX_MODE6      6
  22 #define OMAP_MUX_MODE7      7
  23
  24 /* 24xx/34xx mux bit defines */
  25 #define OMAP_PULL_ENA                   (1 << 3)
  26 #define OMAP_PULL_UP                    (1 << 4)
  27 #define OMAP_ALTELECTRICALSEL           (1 << 5)
  28
  29 /* 34xx specific mux bit defines */
  30 #define OMAP_INPUT_EN                   (1 << 8)
  31 #define OMAP_OFF_EN                     (1 << 9)
  32 #define OMAP_OFFOUT_EN                  (1 << 10)
  33 #define OMAP_OFFOUT_VAL                 (1 << 11)
  34 #define OMAP_OFF_PULL_EN                (1 << 12)
  35 #define OMAP_OFF_PULL_UP                (1 << 13)
  36 #define OMAP_WAKEUP_EN                  (1 << 14)
  37
  38 /* Active pin states */
  39 #define OMAP_PIN_OUTPUT                 0
  40 #define OMAP_PIN_INPUT                  OMAP_INPUT_EN
  41 #define OMAP_PIN_INPUT_PULLUP           (OMAP_PULL_ENA | OMAP_INPUT_EN \
  42                                                 | OMAP_PULL_UP)
  43 #define OMAP_PIN_INPUT_PULLDOWN         (OMAP_PULL_ENA | OMAP_INPUT_EN)
  44
  45 /* Off mode states */
  46 #define OMAP_PIN_OFF_NONE               0
  47 #define OMAP_PIN_OFF_OUTPUT_HIGH        (OMAP_OFF_EN | OMAP_OFFOUT_EN \
  48                                                 | OMAP_OFFOUT_VAL)
  49 #define OMAP_PIN_OFF_OUTPUT_LOW         (OMAP_OFF_EN | OMAP_OFFOUT_EN)
  50 #define OMAP_PIN_OFF_INPUT_PULLUP       (OMAP_OFF_EN | OMAP_OFF_PULL_EN \
  51                                                 | OMAP_OFF_PULL_UP)
  52 #define OMAP_PIN_OFF_INPUT_PULLDOWN     (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
  53 #define OMAP_PIN_OFF_WAKEUPENABLE       OMAP_WAKEUP_EN
  54
  55 #define OMAP_MODE_GPIO(x)       (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
  56
  57 /* Flags for omap_mux_init */
  58 #define OMAP_PACKAGE_MASK               0xffff
  59 #define OMAP_PACKAGE_CBP                4               /* 515-pin 0.40 0.50 */
  60 #define OMAP_PACKAGE_CUS                3               /* 423-pin 0.65 */
  61 #define OMAP_PACKAGE_CBB                2               /* 515-pin 0.40 0.50 */
  62 #define OMAP_PACKAGE_CBC                1               /* 515-pin 0.50 0.65 */
  63
  64
  65 #define OMAP_MUX_NR_MODES       8                       /* Available modes */
  66 #define OMAP_MUX_NR_SIDES       2                       /* Bottom & top */
  67
  68 /**
  69  * struct omap_mux - data for omap mux register offset and it's value
  70  * @reg_offset: mux register offset from the mux base
  71  * @gpio:       GPIO number
  72  * @muxnames:   available signal modes for a ball
  73  */
  74 struct omap_mux {
  75         u16     reg_offset;
  76         u16     gpio;
  77 #ifdef CONFIG_OMAP_MUX
  78         char    *muxnames[OMAP_MUX_NR_MODES];
  79 #ifdef CONFIG_DEBUG_FS
  80         char    *balls[OMAP_MUX_NR_SIDES];
  81 #endif
  82 #endif
  83 };
  84
  85 /**
  86  * struct omap_ball - data for balls on omap package
  87  * @reg_offset: mux register offset from the mux base
  88  * @balls:      available balls on the package
  89  */
  90 struct omap_ball {
  91         u16     reg_offset;
  92         char    *balls[OMAP_MUX_NR_SIDES];
  93 };
  94
  95 /**
  96  * struct omap_board_mux - data for initializing mux registers
  97  * @reg_offset: mux register offset from the mux base
  98  * @mux_value:  desired mux value to set
  99  */
 100 struct omap_board_mux {
 101         u16     reg_offset;
 102         u16     value;
 103 };
 104
 105 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
 106
 107 /**
 108  * omap_mux_init_gpio - initialize a signal based on the GPIO number
 109  * @gpio:               GPIO number
 110  * @val:                Options for the mux register value
 111  */
 112 int omap_mux_init_gpio(int gpio, int val);
 113
 114 /**
 115  * omap_mux_init_signal - initialize a signal based on the signal name
 116  * @muxname:            Mux name in mode0_name.signal_name format
 117  * @val:                Options for the mux register value
 118  */
 119 int omap_mux_init_signal(char *muxname, int val);
 120
 121 #else
 122
 123 static inline int omap_mux_init_gpio(int gpio, int val)
 124 {
 125         return 0;
 126 }
 127 static inline int omap_mux_init_signal(char *muxname, int val)
 128 {
 129         return 0;
 130 }
 131
 132 #endif
 133
 134 /**
 135  * omap_mux_get_gpio() - get mux register value based on GPIO number
 136  * @gpio:               GPIO number
 137  *
 138  */
 139 u16 omap_mux_get_gpio(int gpio);
 140
 141 /**
 142  * omap_mux_set_gpio() - set mux register value based on GPIO number
 143  * @val:                New mux register value
 144  * @gpio:               GPIO number
 145  *
 146  */
 147 void omap_mux_set_gpio(u16 val, int gpio);
 148
 149 /**
 150  * omap_mux_read() - read mux register
 151  * @mux_offset:         Offset of the mux register
 152  *
 153  */
 154 u16 omap_mux_read(u16 mux_offset);
 155
 156 /**
 157  * omap_mux_write() - write mux register
 158  * @val:                New mux register value
 159  * @mux_offset:         Offset of the mux register
 160  *
 161  * This should be only needed for dynamic remuxing of non-gpio signals.
 162  */
 163 void omap_mux_write(u16 val, u16 mux_offset);
 164
 165 /**
 166  * omap_mux_write_array() - write an array of mux registers
 167  * @board_mux:          Array of mux registers terminated by MAP_MUX_TERMINATOR
 168  *
 169  * This should be only needed for dynamic remuxing of non-gpio signals.
 170  */
 171 void omap_mux_write_array(struct omap_board_mux *board_mux);
 172
 173 /**
 174  * omap3_mux_init() - initialize mux system with board specific set
 175  * @board_mux:          Board specific mux table
 176  * @flags:              OMAP package type used for the board
 177  */
 178 int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
 179
 180 /**
 181  * omap_mux_init - private mux init function, do not call
 182  */
 183 int omap_mux_init(u32 mux_pbase, u32 mux_size,
 184                                 struct omap_mux *superset,
 185                                 struct omap_mux *package_subset,
 186                                 struct omap_board_mux *board_mux,
 187                                 struct omap_ball *package_balls);