USB: EHCI: create sysfs companion files directly in the controller device
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / ide / macide.c
blob1447c8c90565dbdbb669465da8e1e2a5186d8526
1 /*
2 * Macintosh IDE Driver
4 * Copyright (C) 1998 by Michael Schmitz
6 * This driver was written based on information obtained from the MacOS IDE
7 * driver binary by Mikael Forselius
9 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file COPYING in the main directory of this archive for
11 * more details.
14 #include <linux/types.h>
15 #include <linux/mm.h>
16 #include <linux/interrupt.h>
17 #include <linux/blkdev.h>
18 #include <linux/delay.h>
19 #include <linux/ide.h>
21 #include <asm/macintosh.h>
22 #include <asm/macints.h>
23 #include <asm/mac_baboon.h>
25 #define IDE_BASE 0x50F1A000 /* Base address of IDE controller */
28 * Generic IDE registers as offsets from the base
29 * These match MkLinux so they should be correct.
32 #define IDE_CONTROL 0x38 /* control/altstatus */
35 * Mac-specific registers
39 * this register is odd; it doesn't seem to do much and it's
40 * not word-aligned like virtually every other hardware register
41 * on the Mac...
44 #define IDE_IFR 0x101 /* (0x101) IDE interrupt flags on Quadra:
46 * Bit 0+1: some interrupt flags
47 * Bit 2+3: some interrupt enable
48 * Bit 4: ??
49 * Bit 5: IDE interrupt flag (any hwif)
50 * Bit 6: maybe IDE interrupt enable (any hwif) ??
51 * Bit 7: Any interrupt condition
54 volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR);
56 int macide_ack_intr(ide_hwif_t* hwif)
58 if (*ide_ifr & 0x20) {
59 *ide_ifr &= ~0x20;
60 return 1;
62 return 0;
65 static void __init macide_setup_ports(struct ide_hw *hw, unsigned long base,
66 int irq, ide_ack_intr_t *ack_intr)
68 int i;
70 memset(hw, 0, sizeof(*hw));
72 for (i = 0; i < 8; i++)
73 hw->io_ports_array[i] = base + i * 4;
75 hw->io_ports.ctl_addr = base + IDE_CONTROL;
77 hw->irq = irq;
78 hw->ack_intr = ack_intr;
81 static const struct ide_port_info macide_port_info = {
82 .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
83 .irq_flags = IRQF_SHARED,
84 .chipset = ide_generic,
87 static const char *mac_ide_name[] =
88 { "Quadra", "Powerbook", "Powerbook Baboon" };
91 * Probe for a Macintosh IDE interface
94 static int __init macide_init(void)
96 ide_ack_intr_t *ack_intr;
97 unsigned long base;
98 int irq;
99 struct ide_hw hw, *hws[] = { &hw };
101 if (!MACH_IS_MAC)
102 return -ENODEV;
104 switch (macintosh_config->ide_type) {
105 case MAC_IDE_QUADRA:
106 base = IDE_BASE;
107 ack_intr = macide_ack_intr;
108 irq = IRQ_NUBUS_F;
109 break;
110 case MAC_IDE_PB:
111 base = IDE_BASE;
112 ack_intr = macide_ack_intr;
113 irq = IRQ_NUBUS_C;
114 break;
115 case MAC_IDE_BABOON:
116 base = BABOON_BASE;
117 ack_intr = NULL;
118 irq = IRQ_BABOON_1;
119 break;
120 default:
121 return -ENODEV;
124 printk(KERN_INFO "ide: Macintosh %s IDE controller\n",
125 mac_ide_name[macintosh_config->ide_type - 1]);
127 macide_setup_ports(&hw, base, irq, ack_intr);
129 return ide_host_add(&macide_port_info, hws, 1, NULL);
132 module_init(macide_init);
134 MODULE_LICENSE("GPL");