Btrfs: fix page->private races
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / net / mac80211 / mesh.c
blobc8a4f19ed13bb810a97bb5e25200a74cdd55a31c
1 /*
2 * Copyright (c) 2008, 2009 open80211s Ltd.
3 * Authors: Luis Carlos Cobo <luisca@cozybit.com>
4 * Javier Cardona <javier@cozybit.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
11 #include <linux/slab.h>
12 #include <asm/unaligned.h>
13 #include "ieee80211_i.h"
14 #include "mesh.h"
16 #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
17 #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
18 #define IEEE80211_MESH_RANN_INTERVAL (1 * HZ)
20 #define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01
21 #define MESHCONF_CAPAB_FORWARDING 0x08
23 #define TMR_RUNNING_HK 0
24 #define TMR_RUNNING_MP 1
25 #define TMR_RUNNING_MPR 2
27 int mesh_allocated;
28 static struct kmem_cache *rm_cache;
30 void ieee80211s_init(void)
32 mesh_pathtbl_init();
33 mesh_allocated = 1;
34 rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
35 0, 0, NULL);
38 void ieee80211s_stop(void)
40 mesh_pathtbl_unregister();
41 kmem_cache_destroy(rm_cache);
44 static void ieee80211_mesh_housekeeping_timer(unsigned long data)
46 struct ieee80211_sub_if_data *sdata = (void *) data;
47 struct ieee80211_local *local = sdata->local;
48 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
50 set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
52 if (local->quiescing) {
53 set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
54 return;
57 ieee80211_queue_work(&local->hw, &sdata->work);
60 /**
61 * mesh_matches_local - check if the config of a mesh point matches ours
63 * @ie: information elements of a management frame from the mesh peer
64 * @sdata: local mesh subif
66 * This function checks if the mesh configuration of a mesh point matches the
67 * local mesh configuration, i.e. if both nodes belong to the same mesh network.
69 bool mesh_matches_local(struct ieee802_11_elems *ie, struct ieee80211_sub_if_data *sdata)
71 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
74 * As support for each feature is added, check for matching
75 * - On mesh config capabilities
76 * - Power Save Support En
77 * - Sync support enabled
78 * - Sync support active
79 * - Sync support required from peer
80 * - MDA enabled
81 * - Power management control on fc
83 if (ifmsh->mesh_id_len == ie->mesh_id_len &&
84 memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
85 (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
86 (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
87 (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
88 (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
89 (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))
90 return true;
92 return false;
95 /**
96 * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
98 * @ie: information elements of a management frame from the mesh peer
100 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
102 return (ie->mesh_config->meshconf_cap &
103 MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
107 * mesh_accept_plinks_update: update accepting_plink in local mesh beacons
109 * @sdata: mesh interface in which mesh beacons are going to be updated
111 void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
113 bool free_plinks;
115 /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
116 * the mesh interface might be able to establish plinks with peers that
117 * are already on the table but are not on PLINK_ESTAB state. However,
118 * in general the mesh interface is not accepting peer link requests
119 * from new peers, and that must be reflected in the beacon
121 free_plinks = mesh_plink_availables(sdata);
123 if (free_plinks != sdata->u.mesh.accepting_plinks)
124 ieee80211_mesh_housekeeping_timer((unsigned long) sdata);
127 void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
129 sta->mesh_pp_id = 0; /* HWMP */
130 sta->mesh_pm_id = 0; /* Airtime */
131 sta->mesh_cc_id = 0; /* Disabled */
132 sta->mesh_sp_id = 0; /* Neighbor Offset */
133 sta->mesh_auth_id = 0; /* Disabled */
136 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
138 int i;
140 sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
141 if (!sdata->u.mesh.rmc)
142 return -ENOMEM;
143 sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
144 for (i = 0; i < RMC_BUCKETS; i++)
145 INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i].list);
146 return 0;
149 void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
151 struct mesh_rmc *rmc = sdata->u.mesh.rmc;
152 struct rmc_entry *p, *n;
153 int i;
155 if (!sdata->u.mesh.rmc)
156 return;
158 for (i = 0; i < RMC_BUCKETS; i++)
159 list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
160 list_del(&p->list);
161 kmem_cache_free(rm_cache, p);
164 kfree(rmc);
165 sdata->u.mesh.rmc = NULL;
169 * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
171 * @sa: source address
172 * @mesh_hdr: mesh_header
174 * Returns: 0 if the frame is not in the cache, nonzero otherwise.
176 * Checks using the source address and the mesh sequence number if we have
177 * received this frame lately. If the frame is not in the cache, it is added to
178 * it.
180 int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
181 struct ieee80211_sub_if_data *sdata)
183 struct mesh_rmc *rmc = sdata->u.mesh.rmc;
184 u32 seqnum = 0;
185 int entries = 0;
186 u8 idx;
187 struct rmc_entry *p, *n;
189 /* Don't care about endianness since only match matters */
190 memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
191 idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
192 list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
193 ++entries;
194 if (time_after(jiffies, p->exp_time) ||
195 (entries == RMC_QUEUE_MAX_LEN)) {
196 list_del(&p->list);
197 kmem_cache_free(rm_cache, p);
198 --entries;
199 } else if ((seqnum == p->seqnum) &&
200 (memcmp(sa, p->sa, ETH_ALEN) == 0))
201 return -1;
204 p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
205 if (!p) {
206 printk(KERN_DEBUG "o11s: could not allocate RMC entry\n");
207 return 0;
209 p->seqnum = seqnum;
210 p->exp_time = jiffies + RMC_TIMEOUT;
211 memcpy(p->sa, sa, ETH_ALEN);
212 list_add(&p->list, &rmc->bucket[idx].list);
213 return 0;
216 void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
218 struct ieee80211_local *local = sdata->local;
219 struct ieee80211_supported_band *sband;
220 u8 *pos;
221 int len, i, rate;
222 u8 neighbors;
224 sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
225 len = sband->n_bitrates;
226 if (len > 8)
227 len = 8;
228 pos = skb_put(skb, len + 2);
229 *pos++ = WLAN_EID_SUPP_RATES;
230 *pos++ = len;
231 for (i = 0; i < len; i++) {
232 rate = sband->bitrates[i].bitrate;
233 *pos++ = (u8) (rate / 5);
236 if (sband->n_bitrates > len) {
237 pos = skb_put(skb, sband->n_bitrates - len + 2);
238 *pos++ = WLAN_EID_EXT_SUPP_RATES;
239 *pos++ = sband->n_bitrates - len;
240 for (i = len; i < sband->n_bitrates; i++) {
241 rate = sband->bitrates[i].bitrate;
242 *pos++ = (u8) (rate / 5);
246 if (sband->band == IEEE80211_BAND_2GHZ) {
247 pos = skb_put(skb, 2 + 1);
248 *pos++ = WLAN_EID_DS_PARAMS;
249 *pos++ = 1;
250 *pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
253 pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len);
254 *pos++ = WLAN_EID_MESH_ID;
255 *pos++ = sdata->u.mesh.mesh_id_len;
256 if (sdata->u.mesh.mesh_id_len)
257 memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len);
259 pos = skb_put(skb, 2 + sizeof(struct ieee80211_meshconf_ie));
260 *pos++ = WLAN_EID_MESH_CONFIG;
261 *pos++ = sizeof(struct ieee80211_meshconf_ie);
263 /* Active path selection protocol ID */
264 *pos++ = sdata->u.mesh.mesh_pp_id;
266 /* Active path selection metric ID */
267 *pos++ = sdata->u.mesh.mesh_pm_id;
269 /* Congestion control mode identifier */
270 *pos++ = sdata->u.mesh.mesh_cc_id;
272 /* Synchronization protocol identifier */
273 *pos++ = sdata->u.mesh.mesh_sp_id;
275 /* Authentication Protocol identifier */
276 *pos++ = sdata->u.mesh.mesh_auth_id;
278 /* Mesh Formation Info - number of neighbors */
279 neighbors = atomic_read(&sdata->u.mesh.mshstats.estab_plinks);
280 /* Number of neighbor mesh STAs or 15 whichever is smaller */
281 neighbors = (neighbors > 15) ? 15 : neighbors;
282 *pos++ = neighbors << 1;
284 /* Mesh capability */
285 sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
286 *pos = MESHCONF_CAPAB_FORWARDING;
287 *pos++ |= sdata->u.mesh.accepting_plinks ?
288 MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
289 *pos++ = 0x00;
292 u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl)
294 /* Use last four bytes of hw addr and interface index as hash index */
295 return jhash_2words(*(u32 *)(addr+2), sdata->dev->ifindex, tbl->hash_rnd)
296 & tbl->hash_mask;
299 struct mesh_table *mesh_table_alloc(int size_order)
301 int i;
302 struct mesh_table *newtbl;
304 newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
305 if (!newtbl)
306 return NULL;
308 newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
309 (1 << size_order), GFP_KERNEL);
311 if (!newtbl->hash_buckets) {
312 kfree(newtbl);
313 return NULL;
316 newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
317 (1 << size_order), GFP_KERNEL);
318 if (!newtbl->hashwlock) {
319 kfree(newtbl->hash_buckets);
320 kfree(newtbl);
321 return NULL;
324 newtbl->size_order = size_order;
325 newtbl->hash_mask = (1 << size_order) - 1;
326 atomic_set(&newtbl->entries, 0);
327 get_random_bytes(&newtbl->hash_rnd,
328 sizeof(newtbl->hash_rnd));
329 for (i = 0; i <= newtbl->hash_mask; i++)
330 spin_lock_init(&newtbl->hashwlock[i]);
332 return newtbl;
336 static void ieee80211_mesh_path_timer(unsigned long data)
338 struct ieee80211_sub_if_data *sdata =
339 (struct ieee80211_sub_if_data *) data;
340 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
341 struct ieee80211_local *local = sdata->local;
343 if (local->quiescing) {
344 set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
345 return;
348 ieee80211_queue_work(&local->hw, &sdata->work);
351 static void ieee80211_mesh_path_root_timer(unsigned long data)
353 struct ieee80211_sub_if_data *sdata =
354 (struct ieee80211_sub_if_data *) data;
355 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
356 struct ieee80211_local *local = sdata->local;
358 set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
360 if (local->quiescing) {
361 set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
362 return;
365 ieee80211_queue_work(&local->hw, &sdata->work);
368 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
370 if (ifmsh->mshcfg.dot11MeshHWMPRootMode)
371 set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
372 else {
373 clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
374 /* stop running timer */
375 del_timer_sync(&ifmsh->mesh_path_root_timer);
380 * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
381 * @hdr: 802.11 frame header
382 * @fc: frame control field
383 * @meshda: destination address in the mesh
384 * @meshsa: source address address in the mesh. Same as TA, as frame is
385 * locally originated.
387 * Return the length of the 802.11 (does not include a mesh control header)
389 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
390 const u8 *meshda, const u8 *meshsa)
392 if (is_multicast_ether_addr(meshda)) {
393 *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
394 /* DA TA SA */
395 memcpy(hdr->addr1, meshda, ETH_ALEN);
396 memcpy(hdr->addr2, meshsa, ETH_ALEN);
397 memcpy(hdr->addr3, meshsa, ETH_ALEN);
398 return 24;
399 } else {
400 *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS |
401 IEEE80211_FCTL_TODS);
402 /* RA TA DA SA */
403 memset(hdr->addr1, 0, ETH_ALEN); /* RA is resolved later */
404 memcpy(hdr->addr2, meshsa, ETH_ALEN);
405 memcpy(hdr->addr3, meshda, ETH_ALEN);
406 memcpy(hdr->addr4, meshsa, ETH_ALEN);
407 return 30;
412 * ieee80211_new_mesh_header - create a new mesh header
413 * @meshhdr: uninitialized mesh header
414 * @sdata: mesh interface to be used
415 * @addr4: addr4 of the mesh frame (1st in ae header)
416 * may be NULL
417 * @addr5: addr5 of the mesh frame (1st or 2nd in ae header)
418 * may be NULL unless addr6 is present
419 * @addr6: addr6 of the mesh frame (2nd or 3rd in ae header)
420 * may be NULL unless addr5 is present
422 * Return the header length.
424 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
425 struct ieee80211_sub_if_data *sdata, char *addr4,
426 char *addr5, char *addr6)
428 int aelen = 0;
429 memset(meshhdr, 0, sizeof(*meshhdr));
430 meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
431 put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
432 sdata->u.mesh.mesh_seqnum++;
433 if (addr4) {
434 meshhdr->flags |= MESH_FLAGS_AE_A4;
435 aelen += ETH_ALEN;
436 memcpy(meshhdr->eaddr1, addr4, ETH_ALEN);
438 if (addr5 && addr6) {
439 meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
440 aelen += 2 * ETH_ALEN;
441 if (!addr4) {
442 memcpy(meshhdr->eaddr1, addr5, ETH_ALEN);
443 memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
444 } else {
445 memcpy(meshhdr->eaddr2, addr5, ETH_ALEN);
446 memcpy(meshhdr->eaddr3, addr6, ETH_ALEN);
449 return 6 + aelen;
452 static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
453 struct ieee80211_if_mesh *ifmsh)
455 bool free_plinks;
457 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
458 printk(KERN_DEBUG "%s: running mesh housekeeping\n",
459 sdata->name);
460 #endif
462 ieee80211_sta_expire(sdata, IEEE80211_MESH_PEER_INACTIVITY_LIMIT);
463 mesh_path_expire(sdata);
465 free_plinks = mesh_plink_availables(sdata);
466 if (free_plinks != sdata->u.mesh.accepting_plinks)
467 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
469 mod_timer(&ifmsh->housekeeping_timer,
470 round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
473 static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
475 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
477 mesh_path_tx_root_frame(sdata);
478 mod_timer(&ifmsh->mesh_path_root_timer,
479 round_jiffies(jiffies + IEEE80211_MESH_RANN_INTERVAL));
482 #ifdef CONFIG_PM
483 void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
485 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
487 /* use atomic bitops in case both timers fire at the same time */
489 if (del_timer_sync(&ifmsh->housekeeping_timer))
490 set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
491 if (del_timer_sync(&ifmsh->mesh_path_timer))
492 set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
493 if (del_timer_sync(&ifmsh->mesh_path_root_timer))
494 set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
497 void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
499 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
501 if (test_and_clear_bit(TMR_RUNNING_HK, &ifmsh->timers_running))
502 add_timer(&ifmsh->housekeeping_timer);
503 if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
504 add_timer(&ifmsh->mesh_path_timer);
505 if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
506 add_timer(&ifmsh->mesh_path_root_timer);
507 ieee80211_mesh_root_setup(ifmsh);
509 #endif
511 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
513 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
514 struct ieee80211_local *local = sdata->local;
516 set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
517 ieee80211_mesh_root_setup(ifmsh);
518 ieee80211_queue_work(&local->hw, &sdata->work);
519 sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
520 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
521 BSS_CHANGED_BEACON_ENABLED |
522 BSS_CHANGED_BEACON_INT);
525 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
527 del_timer_sync(&sdata->u.mesh.housekeeping_timer);
528 del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
530 * If the timer fired while we waited for it, it will have
531 * requeued the work. Now the work will be running again
532 * but will not rearm the timer again because it checks
533 * whether the interface is running, which, at this point,
534 * it no longer is.
536 cancel_work_sync(&sdata->work);
539 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
540 u16 stype,
541 struct ieee80211_mgmt *mgmt,
542 size_t len,
543 struct ieee80211_rx_status *rx_status)
545 struct ieee80211_local *local = sdata->local;
546 struct ieee802_11_elems elems;
547 struct ieee80211_channel *channel;
548 u32 supp_rates = 0;
549 size_t baselen;
550 int freq;
551 enum ieee80211_band band = rx_status->band;
553 /* ignore ProbeResp to foreign address */
554 if (stype == IEEE80211_STYPE_PROBE_RESP &&
555 compare_ether_addr(mgmt->da, sdata->vif.addr))
556 return;
558 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
559 if (baselen > len)
560 return;
562 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
563 &elems);
565 if (elems.ds_params && elems.ds_params_len == 1)
566 freq = ieee80211_channel_to_frequency(elems.ds_params[0]);
567 else
568 freq = rx_status->freq;
570 channel = ieee80211_get_channel(local->hw.wiphy, freq);
572 if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
573 return;
575 if (elems.mesh_id && elems.mesh_config &&
576 mesh_matches_local(&elems, sdata)) {
577 supp_rates = ieee80211_sta_get_rates(local, &elems, band);
579 mesh_neighbour_update(mgmt->sa, supp_rates, sdata,
580 mesh_peer_accepts_plinks(&elems));
584 static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
585 struct ieee80211_mgmt *mgmt,
586 size_t len,
587 struct ieee80211_rx_status *rx_status)
589 switch (mgmt->u.action.category) {
590 case WLAN_CATEGORY_MESH_PLINK:
591 mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
592 break;
593 case WLAN_CATEGORY_MESH_PATH_SEL:
594 mesh_rx_path_sel_frame(sdata, mgmt, len);
595 break;
599 void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
600 struct sk_buff *skb)
602 struct ieee80211_rx_status *rx_status;
603 struct ieee80211_if_mesh *ifmsh;
604 struct ieee80211_mgmt *mgmt;
605 u16 stype;
607 ifmsh = &sdata->u.mesh;
609 rx_status = IEEE80211_SKB_RXCB(skb);
610 mgmt = (struct ieee80211_mgmt *) skb->data;
611 stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
613 switch (stype) {
614 case IEEE80211_STYPE_PROBE_RESP:
615 case IEEE80211_STYPE_BEACON:
616 ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
617 rx_status);
618 break;
619 case IEEE80211_STYPE_ACTION:
620 ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
621 break;
625 void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
627 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
629 if (ifmsh->preq_queue_len &&
630 time_after(jiffies,
631 ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
632 mesh_path_start_discovery(sdata);
634 if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
635 mesh_mpath_table_grow();
637 if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
638 mesh_mpp_table_grow();
640 if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
641 ieee80211_mesh_housekeeping(sdata, ifmsh);
643 if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
644 ieee80211_mesh_rootpath(sdata);
647 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
649 struct ieee80211_sub_if_data *sdata;
651 rcu_read_lock();
652 list_for_each_entry_rcu(sdata, &local->interfaces, list)
653 if (ieee80211_vif_is_mesh(&sdata->vif))
654 ieee80211_queue_work(&local->hw, &sdata->work);
655 rcu_read_unlock();
658 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
660 struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
662 setup_timer(&ifmsh->housekeeping_timer,
663 ieee80211_mesh_housekeeping_timer,
664 (unsigned long) sdata);
666 ifmsh->mshcfg.dot11MeshRetryTimeout = MESH_RET_T;
667 ifmsh->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T;
668 ifmsh->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T;
669 ifmsh->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR;
670 ifmsh->mshcfg.dot11MeshTTL = MESH_TTL;
671 ifmsh->mshcfg.auto_open_plinks = true;
672 ifmsh->mshcfg.dot11MeshMaxPeerLinks =
673 MESH_MAX_ESTAB_PLINKS;
674 ifmsh->mshcfg.dot11MeshHWMPactivePathTimeout =
675 MESH_PATH_TIMEOUT;
676 ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval =
677 MESH_PREQ_MIN_INT;
678 ifmsh->mshcfg.dot11MeshHWMPnetDiameterTraversalTime =
679 MESH_DIAM_TRAVERSAL_TIME;
680 ifmsh->mshcfg.dot11MeshHWMPmaxPREQretries =
681 MESH_MAX_PREQ_RETRIES;
682 ifmsh->mshcfg.path_refresh_time =
683 MESH_PATH_REFRESH_TIME;
684 ifmsh->mshcfg.min_discovery_timeout =
685 MESH_MIN_DISCOVERY_TIMEOUT;
686 ifmsh->accepting_plinks = true;
687 ifmsh->preq_id = 0;
688 ifmsh->sn = 0;
689 atomic_set(&ifmsh->mpaths, 0);
690 mesh_rmc_init(sdata);
691 ifmsh->last_preq = jiffies;
692 /* Allocate all mesh structures when creating the first mesh interface. */
693 if (!mesh_allocated)
694 ieee80211s_init();
695 mesh_ids_set_default(ifmsh);
696 setup_timer(&ifmsh->mesh_path_timer,
697 ieee80211_mesh_path_timer,
698 (unsigned long) sdata);
699 setup_timer(&ifmsh->mesh_path_root_timer,
700 ieee80211_mesh_path_root_timer,
701 (unsigned long) sdata);
702 INIT_LIST_HEAD(&ifmsh->preq_queue.list);
703 spin_lock_init(&ifmsh->mesh_preq_queue_lock);