drivers/video/stifb.c

   1 /*
   2  * linux/drivers/video/stifb.c -
   3  * Low level Frame buffer driver for HP workstations with
   4  * STI (standard text interface) video firmware.
   5  *
   6  * Copyright (C) 2001-2006 Helge Deller <deller@gmx.de>
   7  * Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
   8  *
   9  * Based on:
  10  * - linux/drivers/video/artistfb.c -- Artist frame buffer driver
  11  *      Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
  12  *   - based on skeletonfb, which was
  13  *      Created 28 Dec 1997 by Geert Uytterhoeven
  14  * - HP Xhp cfb-based X11 window driver for XFree86
  15  *      (c)Copyright 1992 Hewlett-Packard Co.
  16  *
  17  *
  18  *  The following graphics display devices (NGLE family) are supported by this driver:
  19  *
  20  *  HPA4070A    known as "HCRX", a 1280x1024 color device with 8 planes
  21  *  HPA4071A    known as "HCRX24", a 1280x1024 color device with 24 planes,
  22  *              optionally available with a hardware accelerator as HPA4071A_Z
  23  *  HPA1659A    known as "CRX", a 1280x1024 color device with 8 planes
  24  *  HPA1439A    known as "CRX24", a 1280x1024 color device with 24 planes,
  25  *              optionally available with a hardware accelerator.
  26  *  HPA1924A    known as "GRX", a 1280x1024 grayscale device with 8 planes
  27  *  HPA2269A    known as "Dual CRX", a 1280x1024 color device with 8 planes,
  28  *              implements support for two displays on a single graphics card.
  29  *  HP710C      internal graphics support optionally available on the HP9000s710 SPU,
  30  *              supports 1280x1024 color displays with 8 planes.
  31  *  HP710G      same as HP710C, 1280x1024 grayscale only
  32  *  HP710L      same as HP710C, 1024x768 color only
  33  *  HP712       internal graphics support on HP9000s712 SPU, supports 640x480,
  34  *              1024x768 or 1280x1024 color displays on 8 planes (Artist)
  35  *
  36  * This file is subject to the terms and conditions of the GNU General Public
  37  * License.  See the file COPYING in the main directory of this archive
  38  * for more details.
  39  */
  40
  41 /* TODO:
  42  *      - 1bpp mode is completely untested
  43  *      - add support for h/w acceleration
  44  *      - add hardware cursor
  45  *      - automatically disable double buffering (e.g. on RDI precisionbook laptop)
  46  */
  47
  48
  49 /* on supported graphic devices you may:
  50  * #define FALLBACK_TO_1BPP to fall back to 1 bpp, or
  51  * #undef  FALLBACK_TO_1BPP to reject support for unsupported cards */
  52 #undef FALLBACK_TO_1BPP
  53
  54 #undef DEBUG_STIFB_REGS         /* debug sti register accesses */
  55
  56
  57 #include <linux/module.h>
  58 #include <linux/kernel.h>
  59 #include <linux/errno.h>
  60 #include <linux/string.h>
  61 #include <linux/mm.h>
  62 #include <linux/slab.h>
  63 #include <linux/delay.h>
  64 #include <linux/fb.h>
  65 #include <linux/init.h>
  66 #include <linux/ioport.h>
  67
  68 #include <asm/grfioctl.h>       /* for HP-UX compatibility */
  69 #include <asm/uaccess.h>
  70
  71 #include "sticore.h"
  72
  73 /* REGION_BASE(fb_info, index) returns the virtual address for region <index> */
  74 #define REGION_BASE(fb_info, index) \
  75         F_EXTEND(fb_info->sti->glob_cfg->region_ptrs[index])
  76
  77 #define NGLEDEVDEPROM_CRT_REGION 1
  78
  79 #define NR_PALETTE 256
  80
  81 typedef struct {
  82         __s32   video_config_reg;
  83         __s32   misc_video_start;
  84         __s32   horiz_timing_fmt;
  85         __s32   serr_timing_fmt;
  86         __s32   vert_timing_fmt;
  87         __s32   horiz_state;
  88         __s32   vert_state;
  89         __s32   vtg_state_elements;
  90         __s32   pipeline_delay;
  91         __s32   misc_video_end;
  92 } video_setup_t;
  93
  94 typedef struct {
  95         __s16   sizeof_ngle_data;
  96         __s16   x_size_visible;     /* visible screen dim in pixels  */
  97         __s16   y_size_visible;
  98         __s16   pad2[15];
  99         __s16   cursor_pipeline_delay;
 100         __s16   video_interleaves;
 101         __s32   pad3[11];
 102 } ngle_rom_t;
 103
 104 struct stifb_info {
 105         struct fb_info info;
 106         unsigned int id;
 107         ngle_rom_t ngle_rom;
 108         struct sti_struct *sti;
 109         int deviceSpecificConfig;
 110         u32 pseudo_palette[16];
 111 };
 112
 113 static int __initdata stifb_bpp_pref[MAX_STI_ROMS];
 114
 115 /* ------------------- chipset specific functions -------------------------- */
 116
 117 /* offsets to graphic-chip internal registers */
 118
 119 #define REG_1           0x000118
 120 #define REG_2           0x000480
 121 #define REG_3           0x0004a0
 122 #define REG_4           0x000600
 123 #define REG_6           0x000800
 124 #define REG_8           0x000820
 125 #define REG_9           0x000a04
 126 #define REG_10          0x018000
 127 #define REG_11          0x018004
 128 #define REG_12          0x01800c
 129 #define REG_13          0x018018
 130 #define REG_14          0x01801c
 131 #define REG_15          0x200000
 132 #define REG_15b0        0x200000
 133 #define REG_16b1        0x200005
 134 #define REG_16b3        0x200007
 135 #define REG_21          0x200218
 136 #define REG_22          0x0005a0
 137 #define REG_23          0x0005c0
 138 #define REG_26          0x200118
 139 #define REG_27          0x200308
 140 #define REG_32          0x21003c
 141 #define REG_33          0x210040
 142 #define REG_34          0x200008
 143 #define REG_35          0x018010
 144 #define REG_38          0x210020
 145 #define REG_39          0x210120
 146 #define REG_40          0x210130
 147 #define REG_42          0x210028
 148 #define REG_43          0x21002c
 149 #define REG_44          0x210030
 150 #define REG_45          0x210034
 151
 152 #define READ_BYTE(fb,reg)               gsc_readb((fb)->info.fix.mmio_start + (reg))
 153 #define READ_WORD(fb,reg)               gsc_readl((fb)->info.fix.mmio_start + (reg))
 154
 155
 156 #ifndef DEBUG_STIFB_REGS
 157 # define  DEBUG_OFF()
 158 # define  DEBUG_ON()
 159 # define WRITE_BYTE(value,fb,reg)       gsc_writeb((value),(fb)->info.fix.mmio_start + (reg))
 160 # define WRITE_WORD(value,fb,reg)       gsc_writel((value),(fb)->info.fix.mmio_start + (reg))
 161 #else
 162   static int debug_on = 1;
 163 # define  DEBUG_OFF() debug_on=0
 164 # define  DEBUG_ON()  debug_on=1
 165 # define WRITE_BYTE(value,fb,reg)       do { if (debug_on) \
 166                                                 printk(KERN_DEBUG "%30s: WRITE_BYTE(0x%06x) = 0x%02x (old=0x%02x)\n", \
 167                                                         __func__, reg, value, READ_BYTE(fb,reg));                 \
 168                                         gsc_writeb((value),(fb)->info.fix.mmio_start + (reg)); } while (0)
 169 # define WRITE_WORD(value,fb,reg)       do { if (debug_on) \
 170                                                 printk(KERN_DEBUG "%30s: WRITE_WORD(0x%06x) = 0x%08x (old=0x%08x)\n", \
 171                                                         __func__, reg, value, READ_WORD(fb,reg));                 \
 172                                         gsc_writel((value),(fb)->info.fix.mmio_start + (reg)); } while (0)
 173 #endif /* DEBUG_STIFB_REGS */
 174
 175
 176 #define ENABLE  1       /* for enabling/disabling screen */
 177 #define DISABLE 0
 178
 179 #define NGLE_LOCK(fb_info)      do { } while (0)
 180 #define NGLE_UNLOCK(fb_info)    do { } while (0)
 181
 182 static void
 183 SETUP_HW(struct stifb_info *fb)
 184 {
 185         char stat;
 186
 187         do {
 188                 stat = READ_BYTE(fb, REG_15b0);
 189                 if (!stat)
 190                         stat = READ_BYTE(fb, REG_15b0);
 191         } while (stat);
 192 }
 193
 194
 195 static void
 196 SETUP_FB(struct stifb_info *fb)
 197 {
 198         unsigned int reg10_value = 0;
 199
 200         SETUP_HW(fb);
 201         switch (fb->id)
 202         {
 203                 case CRT_ID_VISUALIZE_EG:
 204                 case S9000_ID_ARTIST:
 205                 case S9000_ID_A1659A:
 206                         reg10_value = 0x13601000;
 207                         break;
 208                 case S9000_ID_A1439A:
 209                         if (fb->info.var.bits_per_pixel == 32)
 210                                 reg10_value = 0xBBA0A000;
 211                         else
 212                                 reg10_value = 0x13601000;
 213                         break;
 214                 case S9000_ID_HCRX:
 215                         if (fb->info.var.bits_per_pixel == 32)
 216                                 reg10_value = 0xBBA0A000;
 217                         else
 218                                 reg10_value = 0x13602000;
 219                         break;
 220                 case S9000_ID_TIMBER:
 221                 case CRX24_OVERLAY_PLANES:
 222                         reg10_value = 0x13602000;
 223                         break;
 224         }
 225         if (reg10_value)
 226                 WRITE_WORD(reg10_value, fb, REG_10);
 227         WRITE_WORD(0x83000300, fb, REG_14);
 228         SETUP_HW(fb);
 229         WRITE_BYTE(1, fb, REG_16b1);
 230 }
 231
 232 static void
 233 START_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
 234 {
 235         SETUP_HW(fb);
 236         WRITE_WORD(0xBBE0F000, fb, REG_10);
 237         WRITE_WORD(0x03000300, fb, REG_14);
 238         WRITE_WORD(~0, fb, REG_13);
 239 }
 240
 241 static void
 242 WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color)
 243 {
 244         SETUP_HW(fb);
 245         WRITE_WORD(((0x100+index)<<2), fb, REG_3);
 246         WRITE_WORD(color, fb, REG_4);
 247 }
 248
 249 static void
 250 FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
 251 {
 252         WRITE_WORD(0x400, fb, REG_2);
 253         if (fb->info.var.bits_per_pixel == 32) {
 254                 WRITE_WORD(0x83000100, fb, REG_1);
 255         } else {
 256                 if (fb->id == S9000_ID_ARTIST || fb->id == CRT_ID_VISUALIZE_EG)
 257                         WRITE_WORD(0x80000100, fb, REG_26);
 258                 else
 259                         WRITE_WORD(0x80000100, fb, REG_1);
 260         }
 261         SETUP_FB(fb);
 262 }
 263
 264 static void
 265 SETUP_RAMDAC(struct stifb_info *fb)
 266 {
 267         SETUP_HW(fb);
 268         WRITE_WORD(0x04000000, fb, 0x1020);
 269         WRITE_WORD(0xff000000, fb, 0x1028);
 270 }
 271
 272 static void
 273 CRX24_SETUP_RAMDAC(struct stifb_info *fb)
 274 {
 275         SETUP_HW(fb);
 276         WRITE_WORD(0x04000000, fb, 0x1000);
 277         WRITE_WORD(0x02000000, fb, 0x1004);
 278         WRITE_WORD(0xff000000, fb, 0x1008);
 279         WRITE_WORD(0x05000000, fb, 0x1000);
 280         WRITE_WORD(0x02000000, fb, 0x1004);
 281         WRITE_WORD(0x03000000, fb, 0x1008);
 282 }
 283
 284 #if 0
 285 static void
 286 HCRX_SETUP_RAMDAC(struct stifb_info *fb)
 287 {
 288         WRITE_WORD(0xffffffff, fb, REG_32);
 289 }
 290 #endif
 291
 292 static void
 293 CRX24_SET_OVLY_MASK(struct stifb_info *fb)
 294 {
 295         SETUP_HW(fb);
 296         WRITE_WORD(0x13a02000, fb, REG_11);
 297         WRITE_WORD(0x03000300, fb, REG_14);
 298         WRITE_WORD(0x000017f0, fb, REG_3);
 299         WRITE_WORD(0xffffffff, fb, REG_13);
 300         WRITE_WORD(0xffffffff, fb, REG_22);
 301         WRITE_WORD(0x00000000, fb, REG_23);
 302 }
 303
 304 static void
 305 ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
 306 {
 307         unsigned int value = enable ? 0x43000000 : 0x03000000;
 308         SETUP_HW(fb);
 309         WRITE_WORD(0x06000000,  fb, 0x1030);
 310         WRITE_WORD(value,       fb, 0x1038);
 311 }
 312
 313 static void
 314 CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
 315 {
 316         unsigned int value = enable ? 0x10000000 : 0x30000000;
 317         SETUP_HW(fb);
 318         WRITE_WORD(0x01000000,  fb, 0x1000);
 319         WRITE_WORD(0x02000000,  fb, 0x1004);
 320         WRITE_WORD(value,       fb, 0x1008);
 321 }
 322
 323 static void
 324 ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
 325 {
 326         u32 DregsMiscVideo = REG_21;
 327         u32 DregsMiscCtl = REG_27;
 328
 329         SETUP_HW(fb);
 330         if (enable) {
 331           WRITE_WORD(READ_WORD(fb, DregsMiscVideo) | 0x0A000000, fb, DregsMiscVideo);
 332           WRITE_WORD(READ_WORD(fb, DregsMiscCtl)   | 0x00800000, fb, DregsMiscCtl);
 333         } else {
 334           WRITE_WORD(READ_WORD(fb, DregsMiscVideo) & ~0x0A000000, fb, DregsMiscVideo);
 335           WRITE_WORD(READ_WORD(fb, DregsMiscCtl)   & ~0x00800000, fb, DregsMiscCtl);
 336         }
 337 }
 338
 339 #define GET_ROMTABLE_INDEX(fb) \
 340         (READ_BYTE(fb, REG_16b3) - 1)
 341
 342 #define HYPER_CONFIG_PLANES_24 0x00000100
 343
 344 #define IS_24_DEVICE(fb) \
 345         (fb->deviceSpecificConfig & HYPER_CONFIG_PLANES_24)
 346
 347 #define IS_888_DEVICE(fb) \
 348         (!(IS_24_DEVICE(fb)))
 349
 350 #define GET_FIFO_SLOTS(fb, cnt, numslots)       \
 351 {       while (cnt < numslots)                  \
 352                 cnt = READ_WORD(fb, REG_34);    \
 353         cnt -= numslots;                        \
 354 }
 355
 356 #define     IndexedDcd  0       /* Pixel data is indexed (pseudo) color */
 357 #define     Otc04       2       /* Pixels in each longword transfer (4) */
 358 #define     Otc32       5       /* Pixels in each longword transfer (32) */
 359 #define     Ots08       3       /* Each pixel is size (8)d transfer (1) */
 360 #define     OtsIndirect 6       /* Each bit goes through FG/BG color(8) */
 361 #define     AddrLong    5       /* FB address is Long aligned (pixel) */
 362 #define     BINovly     0x2     /* 8 bit overlay */
 363 #define     BINapp0I    0x0     /* Application Buffer 0, Indexed */
 364 #define     BINapp1I    0x1     /* Application Buffer 1, Indexed */
 365 #define     BINapp0F8   0xa     /* Application Buffer 0, Fractional 8-8-8 */
 366 #define     BINattr     0xd     /* Attribute Bitmap */
 367 #define     RopSrc      0x3
 368 #define     BitmapExtent08  3   /* Each write hits ( 8) bits in depth */
 369 #define     BitmapExtent32  5   /* Each write hits (32) bits in depth */
 370 #define     DataDynamic     0   /* Data register reloaded by direct access */
 371 #define     MaskDynamic     1   /* Mask register reloaded by direct access */
 372 #define     MaskOtc         0   /* Mask contains Object Count valid bits */
 373
 374 #define MaskAddrOffset(offset) (offset)
 375 #define StaticReg(en) (en)
 376 #define BGx(en) (en)
 377 #define FGx(en) (en)
 378
 379 #define BAJustPoint(offset) (offset)
 380 #define BAIndexBase(base) (base)
 381 #define BA(F,C,S,A,J,B,I) \
 382         (((F)<<31)|((C)<<27)|((S)<<24)|((A)<<21)|((J)<<16)|((B)<<12)|(I))
 383
 384 #define IBOvals(R,M,X,S,D,L,B,F) \
 385         (((R)<<8)|((M)<<16)|((X)<<24)|((S)<<29)|((D)<<28)|((L)<<31)|((B)<<1)|(F))
 386
 387 #define NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb, val) \
 388         WRITE_WORD(val, fb, REG_14)
 389
 390 #define NGLE_QUICK_SET_DST_BM_ACCESS(fb, val) \
 391         WRITE_WORD(val, fb, REG_11)
 392
 393 #define NGLE_QUICK_SET_CTL_PLN_REG(fb, val) \
 394         WRITE_WORD(val, fb, REG_12)
 395
 396 #define NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, plnmsk32) \
 397         WRITE_WORD(plnmsk32, fb, REG_13)
 398
 399 #define NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, fg32) \
 400         WRITE_WORD(fg32, fb, REG_35)
 401
 402 #define NGLE_SET_TRANSFERDATA(fb, val) \
 403         WRITE_WORD(val, fb, REG_8)
 404
 405 #define NGLE_SET_DSTXY(fb, val) \
 406         WRITE_WORD(val, fb, REG_6)
 407
 408 #define NGLE_LONG_FB_ADDRESS(fbaddrbase, x, y) (                \
 409         (u32) (fbaddrbase) +                                    \
 410             (   (unsigned int)  ( (y) << 13      ) |            \
 411                 (unsigned int)  ( (x) << 2       )      )       \
 412         )
 413
 414 #define NGLE_BINC_SET_DSTADDR(fb, addr) \
 415         WRITE_WORD(addr, fb, REG_3)
 416
 417 #define NGLE_BINC_SET_SRCADDR(fb, addr) \
 418         WRITE_WORD(addr, fb, REG_2)
 419
 420 #define NGLE_BINC_SET_DSTMASK(fb, mask) \
 421         WRITE_WORD(mask, fb, REG_22)
 422
 423 #define NGLE_BINC_WRITE32(fb, data32) \
 424         WRITE_WORD(data32, fb, REG_23)
 425
 426 #define START_COLORMAPLOAD(fb, cmapBltCtlData32) \
 427         WRITE_WORD((cmapBltCtlData32), fb, REG_38)
 428
 429 #define SET_LENXY_START_RECFILL(fb, lenxy) \
 430         WRITE_WORD(lenxy, fb, REG_9)
 431
 432 static void
 433 HYPER_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
 434 {
 435         u32 DregsHypMiscVideo = REG_33;
 436         unsigned int value;
 437         SETUP_HW(fb);
 438         value = READ_WORD(fb, DregsHypMiscVideo);
 439         if (enable)
 440                 value |= 0x0A000000;
 441         else
 442                 value &= ~0x0A000000;
 443         WRITE_WORD(value, fb, DregsHypMiscVideo);
 444 }
 445
 446
 447 /* BufferNumbers used by SETUP_ATTR_ACCESS() */
 448 #define BUFF0_CMAP0     0x00001e02
 449 #define BUFF1_CMAP0     0x02001e02
 450 #define BUFF1_CMAP3     0x0c001e02
 451 #define ARTIST_CMAP0    0x00000102
 452 #define HYPER_CMAP8     0x00000100
 453 #define HYPER_CMAP24    0x00000800
 454
 455 static void
 456 SETUP_ATTR_ACCESS(struct stifb_info *fb, unsigned BufferNumber)
 457 {
 458         SETUP_HW(fb);
 459         WRITE_WORD(0x2EA0D000, fb, REG_11);
 460         WRITE_WORD(0x23000302, fb, REG_14);
 461         WRITE_WORD(BufferNumber, fb, REG_12);
 462         WRITE_WORD(0xffffffff, fb, REG_8);
 463 }
 464
 465 static void
 466 SET_ATTR_SIZE(struct stifb_info *fb, int width, int height)
 467 {
 468         /* REG_6 seems to have special values when run on a
 469            RDI precisionbook parisc laptop (INTERNAL_EG_DX1024 or
 470            INTERNAL_EG_X1024).  The values are:
 471                 0x2f0: internal (LCD) & external display enabled
 472                 0x2a0: external display only
 473                 0x000: zero on standard artist graphic cards
 474         */
 475         WRITE_WORD(0x00000000, fb, REG_6);
 476         WRITE_WORD((width<<16) | height, fb, REG_9);
 477         WRITE_WORD(0x05000000, fb, REG_6);
 478         WRITE_WORD(0x00040001, fb, REG_9);
 479 }
 480
 481 static void
 482 FINISH_ATTR_ACCESS(struct stifb_info *fb)
 483 {
 484         SETUP_HW(fb);
 485         WRITE_WORD(0x00000000, fb, REG_12);
 486 }
 487
 488 static void
 489 elkSetupPlanes(struct stifb_info *fb)
 490 {
 491         SETUP_RAMDAC(fb);
 492         SETUP_FB(fb);
 493 }
 494
 495 static void
 496 ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber)
 497 {
 498         SETUP_ATTR_ACCESS(fb, BufferNumber);
 499         SET_ATTR_SIZE(fb, fb->info.var.xres, fb->info.var.yres);
 500         FINISH_ATTR_ACCESS(fb);
 501         SETUP_FB(fb);
 502 }
 503
 504
 505 static void
 506 rattlerSetupPlanes(struct stifb_info *fb)
 507 {
 508         int saved_id, y;
 509
 510         /* Write RAMDAC pixel read mask register so all overlay
 511          * planes are display-enabled.  (CRX24 uses Bt462 pixel
 512          * read mask register for overlay planes, not image planes).
 513          */
 514         CRX24_SETUP_RAMDAC(fb);
 515
 516         /* change fb->id temporarily to fool SETUP_FB() */
 517         saved_id = fb->id;
 518         fb->id = CRX24_OVERLAY_PLANES;
 519         SETUP_FB(fb);
 520         fb->id = saved_id;
 521
 522         for (y = 0; y < fb->info.var.yres; ++y)
 523                 memset(fb->info.screen_base + y * fb->info.fix.line_length,
 524                         0xff, fb->info.var.xres * fb->info.var.bits_per_pixel/8);
 525
 526         CRX24_SET_OVLY_MASK(fb);
 527         SETUP_FB(fb);
 528 }
 529
 530
 531 #define HYPER_CMAP_TYPE                         0
 532 #define NGLE_CMAP_INDEXED0_TYPE                 0
 533 #define NGLE_CMAP_OVERLAY_TYPE                  3
 534
 535 /* typedef of LUT (Colormap) BLT Control Register */
 536 typedef union   /* Note assumption that fields are packed left-to-right */
 537 {       u32 all;
 538         struct
 539         {
 540                 unsigned enable              :  1;
 541                 unsigned waitBlank           :  1;
 542                 unsigned reserved1           :  4;
 543                 unsigned lutOffset           : 10;   /* Within destination LUT */
 544                 unsigned lutType             :  2;   /* Cursor, image, overlay */
 545                 unsigned reserved2           :  4;
 546                 unsigned length              : 10;
 547         } fields;
 548 } NgleLutBltCtl;
 549
 550
 551 #if 0
 552 static NgleLutBltCtl
 553 setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
 554 {
 555         NgleLutBltCtl lutBltCtl;
 556
 557         /* set enable, zero reserved fields */
 558         lutBltCtl.all           = 0x80000000;
 559         lutBltCtl.fields.length = length;
 560
 561         switch (fb->id)
 562         {
 563         case S9000_ID_A1439A:           /* CRX24 */
 564                 if (fb->var.bits_per_pixel == 8) {
 565                         lutBltCtl.fields.lutType = NGLE_CMAP_OVERLAY_TYPE;
 566                         lutBltCtl.fields.lutOffset = 0;
 567                 } else {
 568                         lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
 569                         lutBltCtl.fields.lutOffset = 0 * 256;
 570                 }
 571                 break;
 572
 573         case S9000_ID_ARTIST:
 574                 lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
 575                 lutBltCtl.fields.lutOffset = 0 * 256;
 576                 break;
 577
 578         default:
 579                 lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
 580                 lutBltCtl.fields.lutOffset = 0;
 581                 break;
 582         }
 583
 584         /* Offset points to start of LUT.  Adjust for within LUT */
 585         lutBltCtl.fields.lutOffset += offsetWithinLut;
 586
 587         return lutBltCtl;
 588 }
 589 #endif
 590
 591 static NgleLutBltCtl
 592 setHyperLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
 593 {
 594         NgleLutBltCtl lutBltCtl;
 595
 596         /* set enable, zero reserved fields */
 597         lutBltCtl.all = 0x80000000;
 598
 599         lutBltCtl.fields.length = length;
 600         lutBltCtl.fields.lutType = HYPER_CMAP_TYPE;
 601
 602         /* Expect lutIndex to be 0 or 1 for image cmaps, 2 or 3 for overlay cmaps */
 603         if (fb->info.var.bits_per_pixel == 8)
 604                 lutBltCtl.fields.lutOffset = 2 * 256;
 605         else
 606                 lutBltCtl.fields.lutOffset = 0 * 256;
 607
 608         /* Offset points to start of LUT.  Adjust for within LUT */
 609         lutBltCtl.fields.lutOffset += offsetWithinLut;
 610
 611         return lutBltCtl;
 612 }
 613
 614
 615 static void hyperUndoITE(struct stifb_info *fb)
 616 {
 617         int nFreeFifoSlots = 0;
 618         u32 fbAddr;
 619
 620         NGLE_LOCK(fb);
 621
 622         GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1);
 623         WRITE_WORD(0xffffffff, fb, REG_32);
 624
 625         /* Write overlay transparency mask so only entry 255 is transparent */
 626
 627         /* Hardware setup for full-depth write to "magic" location */
 628         GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7);
 629         NGLE_QUICK_SET_DST_BM_ACCESS(fb,
 630                 BA(IndexedDcd, Otc04, Ots08, AddrLong,
 631                 BAJustPoint(0), BINovly, BAIndexBase(0)));
 632         NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
 633                 IBOvals(RopSrc, MaskAddrOffset(0),
 634                 BitmapExtent08, StaticReg(0),
 635                 DataDynamic, MaskOtc, BGx(0), FGx(0)));
 636
 637         /* Now prepare to write to the "magic" location */
 638         fbAddr = NGLE_LONG_FB_ADDRESS(0, 1532, 0);
 639         NGLE_BINC_SET_DSTADDR(fb, fbAddr);
 640         NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, 0xffffff);
 641         NGLE_BINC_SET_DSTMASK(fb, 0xffffffff);
 642
 643         /* Finally, write a zero to clear the mask */
 644         NGLE_BINC_WRITE32(fb, 0);
 645
 646         NGLE_UNLOCK(fb);
 647 }
 648
 649 static void
 650 ngleDepth8_ClearImagePlanes(struct stifb_info *fb)
 651 {
 652         /* FIXME! */
 653 }
 654
 655 static void
 656 ngleDepth24_ClearImagePlanes(struct stifb_info *fb)
 657 {
 658         /* FIXME! */
 659 }
 660
 661 static void
 662 ngleResetAttrPlanes(struct stifb_info *fb, unsigned int ctlPlaneReg)
 663 {
 664         int nFreeFifoSlots = 0;
 665         u32 packed_dst;
 666         u32 packed_len;
 667
 668         NGLE_LOCK(fb);
 669
 670         GET_FIFO_SLOTS(fb, nFreeFifoSlots, 4);
 671         NGLE_QUICK_SET_DST_BM_ACCESS(fb,
 672                                      BA(IndexedDcd, Otc32, OtsIndirect,
 673                                         AddrLong, BAJustPoint(0),
 674                                         BINattr, BAIndexBase(0)));
 675         NGLE_QUICK_SET_CTL_PLN_REG(fb, ctlPlaneReg);
 676         NGLE_SET_TRANSFERDATA(fb, 0xffffffff);
 677
 678         NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
 679                                        IBOvals(RopSrc, MaskAddrOffset(0),
 680                                                BitmapExtent08, StaticReg(1),
 681                                                DataDynamic, MaskOtc,
 682                                                BGx(0), FGx(0)));
 683         packed_dst = 0;
 684         packed_len = (fb->info.var.xres << 16) | fb->info.var.yres;
 685         GET_FIFO_SLOTS(fb, nFreeFifoSlots, 2);
 686         NGLE_SET_DSTXY(fb, packed_dst);
 687         SET_LENXY_START_RECFILL(fb, packed_len);
 688
 689         /*
 690          * In order to work around an ELK hardware problem (Buffy doesn't
 691          * always flush it's buffers when writing to the attribute
 692          * planes), at least 4 pixels must be written to the attribute
 693          * planes starting at (X == 1280) and (Y != to the last Y written
 694          * by BIF):
 695          */
 696
 697         if (fb->id == S9000_ID_A1659A) {   /* ELK_DEVICE_ID */
 698                 /* It's safe to use scanline zero: */
 699                 packed_dst = (1280 << 16);
 700                 GET_FIFO_SLOTS(fb, nFreeFifoSlots, 2);
 701                 NGLE_SET_DSTXY(fb, packed_dst);
 702                 packed_len = (4 << 16) | 1;
 703                 SET_LENXY_START_RECFILL(fb, packed_len);
 704         }   /* ELK Hardware Kludge */
 705
 706         /**** Finally, set the Control Plane Register back to zero: ****/
 707         GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1);
 708         NGLE_QUICK_SET_CTL_PLN_REG(fb, 0);
 709
 710         NGLE_UNLOCK(fb);
 711 }
 712
 713 static void
 714 ngleClearOverlayPlanes(struct stifb_info *fb, int mask, int data)
 715 {
 716         int nFreeFifoSlots = 0;
 717         u32 packed_dst;
 718         u32 packed_len;
 719
 720         NGLE_LOCK(fb);
 721
 722         /* Hardware setup */
 723         GET_FIFO_SLOTS(fb, nFreeFifoSlots, 8);
 724         NGLE_QUICK_SET_DST_BM_ACCESS(fb,
 725                                      BA(IndexedDcd, Otc04, Ots08, AddrLong,
 726                                         BAJustPoint(0), BINovly, BAIndexBase(0)));
 727
 728         NGLE_SET_TRANSFERDATA(fb, 0xffffffff);  /* Write foreground color */
 729
 730         NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, data);
 731         NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, mask);
 732
 733         packed_dst = 0;
 734         packed_len = (fb->info.var.xres << 16) | fb->info.var.yres;
 735         NGLE_SET_DSTXY(fb, packed_dst);
 736
 737         /* Write zeroes to overlay planes */
 738         NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
 739                                        IBOvals(RopSrc, MaskAddrOffset(0),
 740                                                BitmapExtent08, StaticReg(0),
 741                                                DataDynamic, MaskOtc, BGx(0), FGx(0)));
 742
 743         SET_LENXY_START_RECFILL(fb, packed_len);
 744
 745         NGLE_UNLOCK(fb);
 746 }
 747
 748 static void
 749 hyperResetPlanes(struct stifb_info *fb, int enable)
 750 {
 751         unsigned int controlPlaneReg;
 752
 753         NGLE_LOCK(fb);
 754
 755         if (IS_24_DEVICE(fb))
 756                 if (fb->info.var.bits_per_pixel == 32)
 757                         controlPlaneReg = 0x04000F00;
 758                 else
 759                         controlPlaneReg = 0x00000F00;   /* 0x00000800 should be enough, but lets clear all 4 bits */
 760         else
 761                 controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */
 762
 763         switch (enable) {
 764         case ENABLE:
 765                 /* clear screen */
 766                 if (IS_24_DEVICE(fb))
 767                         ngleDepth24_ClearImagePlanes(fb);
 768                 else
 769                         ngleDepth8_ClearImagePlanes(fb);
 770
 771                 /* Paint attribute planes for default case.
 772                  * On Hyperdrive, this means all windows using overlay cmap 0. */
 773                 ngleResetAttrPlanes(fb, controlPlaneReg);
 774
 775                 /* clear overlay planes */
 776                 ngleClearOverlayPlanes(fb, 0xff, 255);
 777
 778                 /**************************************************
 779                  ** Also need to counteract ITE settings
 780                  **************************************************/
 781                 hyperUndoITE(fb);
 782                 break;
 783
 784         case DISABLE:
 785                 /* clear screen */
 786                 if (IS_24_DEVICE(fb))
 787                         ngleDepth24_ClearImagePlanes(fb);
 788                 else
 789                         ngleDepth8_ClearImagePlanes(fb);
 790                 ngleResetAttrPlanes(fb, controlPlaneReg);
 791                 ngleClearOverlayPlanes(fb, 0xff, 0);
 792                 break;
 793
 794         case -1:        /* RESET */
 795                 hyperUndoITE(fb);
 796                 ngleResetAttrPlanes(fb, controlPlaneReg);
 797                 break;
 798         }
 799
 800         NGLE_UNLOCK(fb);
 801 }
 802
 803 /* Return pointer to in-memory structure holding ELK device-dependent ROM values. */
 804
 805 static void
 806 ngleGetDeviceRomData(struct stifb_info *fb)
 807 {
 808 #if 0
 809 XXX: FIXME: !!!
 810         int     *pBytePerLongDevDepData;/* data byte == LSB */
 811         int     *pRomTable;
 812         NgleDevRomData  *pPackedDevRomData;
 813         int     sizePackedDevRomData = sizeof(*pPackedDevRomData);
 814         char    *pCard8;
 815         int     i;
 816         char    *mapOrigin = NULL;
 817
 818         int romTableIdx;
 819
 820         pPackedDevRomData = fb->ngle_rom;
 821
 822         SETUP_HW(fb);
 823         if (fb->id == S9000_ID_ARTIST) {
 824                 pPackedDevRomData->cursor_pipeline_delay = 4;
 825                 pPackedDevRomData->video_interleaves     = 4;
 826         } else {
 827                 /* Get pointer to unpacked byte/long data in ROM */
 828                 pBytePerLongDevDepData = fb->sti->regions[NGLEDEVDEPROM_CRT_REGION];
 829
 830                 /* Tomcat supports several resolutions: 1280x1024, 1024x768, 640x480 */
 831                 if (fb->id == S9000_ID_TOMCAT)
 832         {
 833             /*  jump to the correct ROM table  */
 834             GET_ROMTABLE_INDEX(romTableIdx);
 835             while  (romTableIdx > 0)
 836             {
 837                 pCard8 = (Card8 *) pPackedDevRomData;
 838                 pRomTable = pBytePerLongDevDepData;
 839                 /* Pack every fourth byte from ROM into structure */
 840                 for (i = 0; i < sizePackedDevRomData; i++)
 841                 {
 842                     *pCard8++ = (Card8) (*pRomTable++);
 843                 }
 844
 845                 pBytePerLongDevDepData = (Card32 *)
 846                         ((Card8 *) pBytePerLongDevDepData +
 847                                pPackedDevRomData->sizeof_ngle_data);
 848
 849                 romTableIdx--;
 850             }
 851         }
 852
 853         pCard8 = (Card8 *) pPackedDevRomData;
 854
 855         /* Pack every fourth byte from ROM into structure */
 856         for (i = 0; i < sizePackedDevRomData; i++)
 857         {
 858             *pCard8++ = (Card8) (*pBytePerLongDevDepData++);
 859         }
 860     }
 861
 862     SETUP_FB(fb);
 863 #endif
 864 }
 865
 866
 867 #define HYPERBOWL_MODE_FOR_8_OVER_88_LUT0_NO_TRANSPARENCIES     4
 868 #define HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE      8
 869 #define HYPERBOWL_MODE01_8_24_LUT0_OPAQUE_LUT1_OPAQUE           10
 870 #define HYPERBOWL_MODE2_8_24                                    15
 871
 872 /* HCRX specific boot-time initialization */
 873 static void __init
 874 SETUP_HCRX(struct stifb_info *fb)
 875 {
 876         int     hyperbowl;
 877         int     nFreeFifoSlots = 0;
 878
 879         if (fb->id != S9000_ID_HCRX)
 880                 return;
 881
 882         /* Initialize Hyperbowl registers */
 883         GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7);
 884
 885         if (IS_24_DEVICE(fb)) {
 886                 hyperbowl = (fb->info.var.bits_per_pixel == 32) ?
 887                         HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE :
 888                         HYPERBOWL_MODE01_8_24_LUT0_OPAQUE_LUT1_OPAQUE;
 889
 890                 /* First write to Hyperbowl must happen twice (bug) */
 891                 WRITE_WORD(hyperbowl, fb, REG_40);
 892                 WRITE_WORD(hyperbowl, fb, REG_40);
 893
 894                 WRITE_WORD(HYPERBOWL_MODE2_8_24, fb, REG_39);
 895
 896                 WRITE_WORD(0x014c0148, fb, REG_42); /* Set lut 0 to be the direct color */
 897                 WRITE_WORD(0x404c4048, fb, REG_43);
 898                 WRITE_WORD(0x034c0348, fb, REG_44);
 899                 WRITE_WORD(0x444c4448, fb, REG_45);
 900         } else {
 901                 hyperbowl = HYPERBOWL_MODE_FOR_8_OVER_88_LUT0_NO_TRANSPARENCIES;
 902
 903                 /* First write to Hyperbowl must happen twice (bug) */
 904                 WRITE_WORD(hyperbowl, fb, REG_40);
 905                 WRITE_WORD(hyperbowl, fb, REG_40);
 906
 907                 WRITE_WORD(0x00000000, fb, REG_42);
 908                 WRITE_WORD(0x00000000, fb, REG_43);
 909                 WRITE_WORD(0x00000000, fb, REG_44);
 910                 WRITE_WORD(0x444c4048, fb, REG_45);
 911         }
 912 }
 913
 914
 915 /* ------------------- driver specific functions --------------------------- */
 916
 917 static int
 918 stifb_setcolreg(u_int regno, u_int red, u_int green,
 919               u_int blue, u_int transp, struct fb_info *info)
 920 {
 921         struct stifb_info *fb = (struct stifb_info *) info;
 922         u32 color;
 923
 924         if (regno >= NR_PALETTE)
 925                 return 1;
 926
 927         red   >>= 8;
 928         green >>= 8;
 929         blue  >>= 8;
 930
 931         DEBUG_OFF();
 932
 933         START_IMAGE_COLORMAP_ACCESS(fb);
 934
 935         if (unlikely(fb->info.var.grayscale)) {
 936                 /* gray = 0.30*R + 0.59*G + 0.11*B */
 937                 color = ((red * 77) +
 938                          (green * 151) +
 939                          (blue * 28)) >> 8;
 940         } else {
 941                 color = ((red << 16) |
 942                          (green << 8) |
 943                          (blue));
 944         }
 945
 946         if (fb->info.fix.visual == FB_VISUAL_DIRECTCOLOR) {
 947                 struct fb_var_screeninfo *var = &fb->info.var;
 948                 if (regno < 16)
 949                         ((u32 *)fb->info.pseudo_palette)[regno] =
 950                                 regno << var->red.offset |
 951                                 regno << var->green.offset |
 952                                 regno << var->blue.offset;
 953         }
 954
 955         WRITE_IMAGE_COLOR(fb, regno, color);
 956
 957         if (fb->id == S9000_ID_HCRX) {
 958                 NgleLutBltCtl lutBltCtl;
 959
 960                 lutBltCtl = setHyperLutBltCtl(fb,
 961                                 0,      /* Offset w/i LUT */
 962                                 256);   /* Load entire LUT */
 963                 NGLE_BINC_SET_SRCADDR(fb,
 964                                 NGLE_LONG_FB_ADDRESS(0, 0x100, 0));
 965                                 /* 0x100 is same as used in WRITE_IMAGE_COLOR() */
 966                 START_COLORMAPLOAD(fb, lutBltCtl.all);
 967                 SETUP_FB(fb);
 968         } else {
 969                 /* cleanup colormap hardware */
 970                 FINISH_IMAGE_COLORMAP_ACCESS(fb);
 971         }
 972
 973         DEBUG_ON();
 974
 975         return 0;
 976 }
 977
 978 static int
 979 stifb_blank(int blank_mode, struct fb_info *info)
 980 {
 981         struct stifb_info *fb = (struct stifb_info *) info;
 982         int enable = (blank_mode == 0) ? ENABLE : DISABLE;
 983
 984         switch (fb->id) {
 985         case S9000_ID_A1439A:
 986                 CRX24_ENABLE_DISABLE_DISPLAY(fb, enable);
 987                 break;
 988         case CRT_ID_VISUALIZE_EG:
 989         case S9000_ID_ARTIST:
 990                 ARTIST_ENABLE_DISABLE_DISPLAY(fb, enable);
 991                 break;
 992         case S9000_ID_HCRX:
 993                 HYPER_ENABLE_DISABLE_DISPLAY(fb, enable);
 994                 break;
 995         case S9000_ID_A1659A:   /* fall through */
 996         case S9000_ID_TIMBER:
 997         case CRX24_OVERLAY_PLANES:
 998         default:
 999                 ENABLE_DISABLE_DISPLAY(fb, enable);
1000                 break;
1001         }
1002
1003         SETUP_FB(fb);
1004         return 0;
1005 }
1006
1007 static void __init
1008 stifb_init_display(struct stifb_info *fb)
1009 {
1010         int id = fb->id;
1011
1012         SETUP_FB(fb);
1013
1014         /* HCRX specific initialization */
1015         SETUP_HCRX(fb);
1016
1017         /*
1018         if (id == S9000_ID_HCRX)
1019                 hyperInitSprite(fb);
1020         else
1021                 ngleInitSprite(fb);
1022         */
1023
1024         /* Initialize the image planes. */
1025         switch (id) {
1026          case S9000_ID_HCRX:
1027             hyperResetPlanes(fb, ENABLE);
1028             break;
1029          case S9000_ID_A1439A:
1030             rattlerSetupPlanes(fb);
1031             break;
1032          case S9000_ID_A1659A:
1033          case S9000_ID_ARTIST:
1034          case CRT_ID_VISUALIZE_EG:
1035             elkSetupPlanes(fb);
1036             break;
1037         }
1038
1039         /* Clear attribute planes on non HCRX devices. */
1040         switch (id) {
1041          case S9000_ID_A1659A:
1042          case S9000_ID_A1439A:
1043             if (fb->info.var.bits_per_pixel == 32)
1044                 ngleSetupAttrPlanes(fb, BUFF1_CMAP3);
1045             else {
1046                 ngleSetupAttrPlanes(fb, BUFF1_CMAP0);
1047             }
1048             if (id == S9000_ID_A1439A)
1049                 ngleClearOverlayPlanes(fb, 0xff, 0);
1050             break;
1051          case S9000_ID_ARTIST:
1052          case CRT_ID_VISUALIZE_EG:
1053             if (fb->info.var.bits_per_pixel == 32)
1054                 ngleSetupAttrPlanes(fb, BUFF1_CMAP3);
1055             else {
1056                 ngleSetupAttrPlanes(fb, ARTIST_CMAP0);
1057             }
1058             break;
1059         }
1060         stifb_blank(0, (struct fb_info *)fb);   /* 0=enable screen */
1061
1062         SETUP_FB(fb);
1063 }
1064
1065 /* ------------ Interfaces to hardware functions ------------ */
1066
1067 static struct fb_ops stifb_ops = {
1068         .owner          = THIS_MODULE,
1069         .fb_setcolreg   = stifb_setcolreg,
1070         .fb_blank       = stifb_blank,
1071         .fb_fillrect    = cfb_fillrect,
1072         .fb_copyarea    = cfb_copyarea,
1073         .fb_imageblit   = cfb_imageblit,
1074 };
1075
1076
1077 /*
1078  *  Initialization
1079  */
1080
1081 static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
1082 {
1083         struct fb_fix_screeninfo *fix;
1084         struct fb_var_screeninfo *var;
1085         struct stifb_info *fb;
1086         struct fb_info *info;
1087         unsigned long sti_rom_address;
1088         char *dev_name;
1089         int bpp, xres, yres;
1090
1091         fb = kzalloc(sizeof(*fb), GFP_ATOMIC);
1092         if (!fb) {
1093                 printk(KERN_ERR "stifb: Could not allocate stifb structure\n");
1094                 return -ENODEV;
1095         }
1096
1097         info = &fb->info;
1098
1099         /* set struct to a known state */
1100         fix = &info->fix;
1101         var = &info->var;
1102
1103         fb->sti = sti;
1104         /* store upper 32bits of the graphics id */
1105         fb->id = fb->sti->graphics_id[0];
1106
1107         /* only supported cards are allowed */
1108         switch (fb->id) {
1109         case CRT_ID_VISUALIZE_EG:
1110                 /* Visualize cards can run either in "double buffer" or
1111                   "standard" mode. Depending on the mode, the card reports
1112                   a different device name, e.g. "INTERNAL_EG_DX1024" in double
1113                   buffer mode and "INTERNAL_EG_X1024" in standard mode.
1114                   Since this driver only supports standard mode, we check
1115                   if the device name contains the string "DX" and tell the
1116                   user how to reconfigure the card. */
1117                 if (strstr(sti->outptr.dev_name, "DX")) {
1118                    printk(KERN_WARNING
1119 "WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n"
1120 "WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n",
1121                         sti->outptr.dev_name);
1122                    goto out_err0;
1123                 }
1124                 /* fall though */
1125         case S9000_ID_ARTIST:
1126         case S9000_ID_HCRX:
1127         case S9000_ID_TIMBER:
1128         case S9000_ID_A1659A:
1129         case S9000_ID_A1439A:
1130                 break;
1131         default:
1132                 printk(KERN_WARNING "stifb: '%s' (id: 0x%08x) not supported.\n",
1133                         sti->outptr.dev_name, fb->id);
1134                 goto out_err0;
1135         }
1136
1137         /* default to 8 bpp on most graphic chips */
1138         bpp = 8;
1139         xres = sti_onscreen_x(fb->sti);
1140         yres = sti_onscreen_y(fb->sti);
1141
1142         ngleGetDeviceRomData(fb);
1143
1144         /* get (virtual) io region base addr */
1145         fix->mmio_start = REGION_BASE(fb,2);
1146         fix->mmio_len   = 0x400000;
1147
1148         /* Reject any device not in the NGLE family */
1149         switch (fb->id) {
1150         case S9000_ID_A1659A:   /* CRX/A1659A */
1151                 break;
1152         case S9000_ID_ELM:      /* GRX, grayscale but else same as A1659A */
1153                 var->grayscale = 1;
1154                 fb->id = S9000_ID_A1659A;
1155                 break;
1156         case S9000_ID_TIMBER:   /* HP9000/710 Any (may be a grayscale device) */
1157                 dev_name = fb->sti->outptr.dev_name;
1158                 if (strstr(dev_name, "GRAYSCALE") ||
1159                     strstr(dev_name, "Grayscale") ||
1160                     strstr(dev_name, "grayscale"))
1161                         var->grayscale = 1;
1162                 break;
1163         case S9000_ID_TOMCAT:   /* Dual CRX, behaves else like a CRX */
1164                 /* FIXME: TomCat supports two heads:
1165                  * fb.iobase = REGION_BASE(fb_info,3);
1166                  * fb.screen_base = ioremap_nocache(REGION_BASE(fb_info,2),xxx);
1167                  * for now we only support the left one ! */
1168                 xres = fb->ngle_rom.x_size_visible;
1169                 yres = fb->ngle_rom.y_size_visible;
1170                 fb->id = S9000_ID_A1659A;
1171                 break;
1172         case S9000_ID_A1439A:   /* CRX24/A1439A */
1173                 bpp = 32;
1174                 break;
1175         case S9000_ID_HCRX:     /* Hyperdrive/HCRX */
1176                 memset(&fb->ngle_rom, 0, sizeof(fb->ngle_rom));
1177                 if ((fb->sti->regions_phys[0] & 0xfc000000) ==
1178                     (fb->sti->regions_phys[2] & 0xfc000000))
1179                         sti_rom_address = F_EXTEND(fb->sti->regions_phys[0]);
1180                 else
1181                         sti_rom_address = F_EXTEND(fb->sti->regions_phys[1]);
1182
1183                 fb->deviceSpecificConfig = gsc_readl(sti_rom_address);
1184                 if (IS_24_DEVICE(fb)) {
1185                         if (bpp_pref == 8 || bpp_pref == 32)
1186                                 bpp = bpp_pref;
1187                         else
1188                                 bpp = 32;
1189                 } else
1190                         bpp = 8;
1191                 READ_WORD(fb, REG_15);
1192                 SETUP_HW(fb);
1193                 break;
1194         case CRT_ID_VISUALIZE_EG:
1195         case S9000_ID_ARTIST:   /* Artist */
1196                 break;
1197         default:
1198 #ifdef FALLBACK_TO_1BPP
1199                 printk(KERN_WARNING
1200                         "stifb: Unsupported graphics card (id=0x%08x) "
1201                                 "- now trying 1bpp mode instead\n",
1202                         fb->id);
1203                 bpp = 1;        /* default to 1 bpp */
1204                 break;
1205 #else
1206                 printk(KERN_WARNING
1207                         "stifb: Unsupported graphics card (id=0x%08x) "
1208                                 "- skipping.\n",
1209                         fb->id);
1210                 goto out_err0;
1211 #endif
1212         }
1213
1214
1215         /* get framebuffer physical and virtual base addr & len (64bit ready) */
1216         fix->smem_start = F_EXTEND(fb->sti->regions_phys[1]);
1217         fix->smem_len = fb->sti->regions[1].region_desc.length * 4096;
1218
1219         fix->line_length = (fb->sti->glob_cfg->total_x * bpp) / 8;
1220         if (!fix->line_length)
1221                 fix->line_length = 2048; /* default */
1222
1223         /* limit fbsize to max visible screen size */
1224         if (fix->smem_len > yres*fix->line_length)
1225                 fix->smem_len = yres*fix->line_length;
1226
1227         fix->accel = FB_ACCEL_NONE;
1228
1229         switch (bpp) {
1230             case 1:
1231                 fix->type = FB_TYPE_PLANES;     /* well, sort of */
1232                 fix->visual = FB_VISUAL_MONO10;
1233                 var->red.length = var->green.length = var->blue.length = 1;
1234                 break;
1235             case 8:
1236                 fix->type = FB_TYPE_PACKED_PIXELS;
1237                 fix->visual = FB_VISUAL_PSEUDOCOLOR;
1238                 var->red.length = var->green.length = var->blue.length = 8;
1239                 break;
1240             case 32:
1241                 fix->type = FB_TYPE_PACKED_PIXELS;
1242                 fix->visual = FB_VISUAL_DIRECTCOLOR;
1243                 var->red.length = var->green.length = var->blue.length = var->transp.length = 8;
1244                 var->blue.offset = 0;
1245                 var->green.offset = 8;
1246                 var->red.offset = 16;
1247                 var->transp.offset = 24;
1248                 break;
1249             default:
1250                 break;
1251         }
1252
1253         var->xres = var->xres_virtual = xres;
1254         var->yres = var->yres_virtual = yres;
1255         var->bits_per_pixel = bpp;
1256
1257         strcpy(fix->id, "stifb");
1258         info->fbops = &stifb_ops;
1259         info->screen_base = ioremap_nocache(REGION_BASE(fb,1), fix->smem_len);
1260         info->screen_size = fix->smem_len;
1261         info->flags = FBINFO_DEFAULT;
1262         info->pseudo_palette = &fb->pseudo_palette;
1263
1264         /* This has to be done !!! */
1265         if (fb_alloc_cmap(&info->cmap, NR_PALETTE, 0))
1266                 goto out_err1;
1267         stifb_init_display(fb);
1268
1269         if (!request_mem_region(fix->smem_start, fix->smem_len, "stifb fb")) {
1270                 printk(KERN_ERR "stifb: cannot reserve fb region 0x%04lx-0x%04lx\n",
1271                                 fix->smem_start, fix->smem_start+fix->smem_len);
1272                 goto out_err2;
1273         }
1274
1275         if (!request_mem_region(fix->mmio_start, fix->mmio_len, "stifb mmio")) {
1276                 printk(KERN_ERR "stifb: cannot reserve sti mmio region 0x%04lx-0x%04lx\n",
1277                                 fix->mmio_start, fix->mmio_start+fix->mmio_len);
1278                 goto out_err3;
1279         }
1280
1281         if (register_framebuffer(&fb->info) < 0)
1282                 goto out_err4;
1283
1284         sti->info = info; /* save for unregister_framebuffer() */
1285
1286         printk(KERN_INFO
1287             "fb%d: %s %dx%d-%d frame buffer device, %s, id: %04x, mmio: 0x%04lx\n",
1288                 fb->info.node,
1289                 fix->id,
1290                 var->xres,
1291                 var->yres,
1292                 var->bits_per_pixel,
1293                 sti->outptr.dev_name,
1294                 fb->id,
1295                 fix->mmio_start);
1296
1297         return 0;
1298
1299
1300 out_err4:
1301         release_mem_region(fix->mmio_start, fix->mmio_len);
1302 out_err3:
1303         release_mem_region(fix->smem_start, fix->smem_len);
1304 out_err2:
1305         fb_dealloc_cmap(&info->cmap);
1306 out_err1:
1307         iounmap(info->screen_base);
1308 out_err0:
1309         kfree(fb);
1310         return -ENXIO;
1311 }
1312
1313 static int stifb_disabled __initdata;
1314
1315 int __init
1316 stifb_setup(char *options);
1317
1318 static int __init stifb_init(void)
1319 {
1320         struct sti_struct *sti;
1321         struct sti_struct *def_sti;
1322         int i;
1323
1324 #ifndef MODULE
1325         char *option = NULL;
1326
1327         if (fb_get_options("stifb", &option))
1328                 return -ENODEV;
1329         stifb_setup(option);
1330 #endif
1331         if (stifb_disabled) {
1332                 printk(KERN_INFO "stifb: disabled by \"stifb=off\" kernel parameter\n");
1333                 return -ENXIO;
1334         }
1335
1336         def_sti = sti_get_rom(0);
1337         if (def_sti) {
1338                 for (i = 1; i <= MAX_STI_ROMS; i++) {
1339                         sti = sti_get_rom(i);
1340                         if (!sti)
1341                                 break;
1342                         if (sti == def_sti) {
1343                                 stifb_init_fb(sti, stifb_bpp_pref[i - 1]);
1344                                 break;
1345                         }
1346                 }
1347         }
1348
1349         for (i = 1; i <= MAX_STI_ROMS; i++) {
1350                 sti = sti_get_rom(i);
1351                 if (!sti)
1352                         break;
1353                 if (sti == def_sti)
1354                         continue;
1355                 stifb_init_fb(sti, stifb_bpp_pref[i - 1]);
1356         }
1357         return 0;
1358 }
1359
1360 /*
1361  *  Cleanup
1362  */
1363
1364 static void __exit
1365 stifb_cleanup(void)
1366 {
1367         struct sti_struct *sti;
1368         int i;
1369
1370         for (i = 1; i <= MAX_STI_ROMS; i++) {
1371                 sti = sti_get_rom(i);
1372                 if (!sti)
1373                         break;
1374                 if (sti->info) {
1375                         struct fb_info *info = sti->info;
1376                         unregister_framebuffer(sti->info);
1377                         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1378                         release_mem_region(info->fix.smem_start, info->fix.smem_len);
1379                                 if (info->screen_base)
1380                                         iounmap(info->screen_base);
1381                         fb_dealloc_cmap(&info->cmap);
1382                         framebuffer_release(info);
1383                 }
1384                 sti->info = NULL;
1385         }
1386 }
1387
1388 int __init
1389 stifb_setup(char *options)
1390 {
1391         int i;
1392
1393         if (!options || !*options)
1394                 return 1;
1395
1396         if (strncmp(options, "off", 3) == 0) {
1397                 stifb_disabled = 1;
1398                 options += 3;
1399         }
1400
1401         if (strncmp(options, "bpp", 3) == 0) {
1402                 options += 3;
1403                 for (i = 0; i < MAX_STI_ROMS; i++) {
1404                         if (*options++ != ':')
1405                                 break;
1406                         stifb_bpp_pref[i] = simple_strtoul(options, &options, 10);
1407                 }
1408         }
1409         return 1;
1410 }
1411
1412 __setup("stifb=", stifb_setup);
1413
1414 module_init(stifb_init);
1415 module_exit(stifb_cleanup);
1416
1417 MODULE_AUTHOR("Helge Deller <deller@gmx.de>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
1418 MODULE_DESCRIPTION("Framebuffer driver for HP's NGLE series graphics cards in HP PARISC machines");
1419 MODULE_LICENSE("GPL v2");