drivers/staging/wlags49_h2/wl_pci.c

   1 /*******************************************************************************
   2  * Agere Systems Inc.
   3  * Wireless device driver for Linux (wlags49).
   4  *
   5  * Copyright (c) 1998-2003 Agere Systems Inc.
   6  * All rights reserved.
   7  *   http://www.agere.com
   8  *
   9  * Initially developed by TriplePoint, Inc.
  10  *   http://www.triplepoint.com
  11  *
  12  *------------------------------------------------------------------------------
  13  *
  14  *   This file contains processing and initialization specific to PCI/miniPCI
  15  *   devices.
  16  *
  17  *------------------------------------------------------------------------------
  18  *
  19  * SOFTWARE LICENSE
  20  *
  21  * This software is provided subject to the following terms and conditions,
  22  * which you should read carefully before using the software.  Using this
  23  * software indicates your acceptance of these terms and conditions.  If you do
  24  * not agree with these terms and conditions, do not use the software.
  25  *
  26  * Copyright © 2003 Agere Systems Inc.
  27  * All rights reserved.
  28  *
  29  * Redistribution and use in source or binary forms, with or without
  30  * modifications, are permitted provided that the following conditions are met:
  31  *
  32  * . Redistributions of source code must retain the above copyright notice, this
  33  *    list of conditions and the following Disclaimer as comments in the code as
  34  *    well as in the documentation and/or other materials provided with the
  35  *    distribution.
  36  *
  37  * . Redistributions in binary form must reproduce the above copyright notice,
  38  *    this list of conditions and the following Disclaimer in the documentation
  39  *    and/or other materials provided with the distribution.
  40  *
  41  * . Neither the name of Agere Systems Inc. nor the names of the contributors
  42  *    may be used to endorse or promote products derived from this software
  43  *    without specific prior written permission.
  44  *
  45  * Disclaimer
  46  *
  47  * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
  48  * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
  49  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
  50  * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
  51  * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
  52  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  53  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  54  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  55  * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
  56  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  57  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  58  * DAMAGE.
  59  *
  60  ******************************************************************************/
  61
  62 /*******************************************************************************
  63  * include files
  64  ******************************************************************************/
  65 #include <wireless/wl_version.h>
  66
  67 #include <linux/module.h>
  68 #include <linux/kernel.h>
  69 #include <linux/errno.h>
  70 #include <linux/pci.h>
  71 #include <linux/init.h>
  72 #include <linux/sched.h>
  73 #include <linux/ptrace.h>
  74 #include <linux/ctype.h>
  75 #include <linux/string.h>
  76 //#include <linux/timer.h>
  77 #include <linux/interrupt.h>
  78 #include <linux/in.h>
  79 #include <linux/delay.h>
  80 #include <asm/system.h>
  81 #include <asm/io.h>
  82 #include <asm/irq.h>
  83 #include <asm/bitops.h>
  84 #include <asm/uaccess.h>
  85
  86 #include <linux/ethtool.h>
  87 #include <linux/netdevice.h>
  88 #include <linux/etherdevice.h>
  89 #include <linux/skbuff.h>
  90 #include <linux/if_arp.h>
  91 #include <linux/ioport.h>
  92
  93 #include <hcf/debug.h>
  94
  95 #include <hcf.h>
  96 #include <dhf.h>
  97 #include <hcfdef.h>
  98
  99 #include <wireless/wl_if.h>
 100 #include <wireless/wl_internal.h>
 101 #include <wireless/wl_util.h>
 102 #include <wireless/wl_main.h>
 103 #include <wireless/wl_netdev.h>
 104 #include <wireless/wl_pci.h>
 105
 106
 107 /*******************************************************************************
 108  * global variables
 109  ******************************************************************************/
 110 #if DBG
 111 extern dbg_info_t *DbgInfo;
 112 #endif  // DBG
 113
 114 /* define the PCI device Table Cardname and id tables */
 115 enum hermes_pci_versions {
 116         CH_Agere_Systems_Mini_PCI_V1 = 0,
 117 };
 118
 119 static struct pci_device_id wl_pci_tbl[] __devinitdata = {
 120         { WL_LKM_PCI_VENDOR_ID, WL_LKM_PCI_DEVICE_ID_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
 121     { WL_LKM_PCI_VENDOR_ID, WL_LKM_PCI_DEVICE_ID_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
 122     { WL_LKM_PCI_VENDOR_ID, WL_LKM_PCI_DEVICE_ID_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
 123         { }                     /* Terminating entry */
 124 };
 125
 126 MODULE_DEVICE_TABLE(pci, wl_pci_tbl);
 127
 128 /*******************************************************************************
 129  * function prototypes
 130  ******************************************************************************/
 131 int __devinit wl_pci_probe( struct pci_dev *pdev,
 132                                 const struct pci_device_id *ent );
 133 void __devexit wl_pci_remove(struct pci_dev *pdev);
 134 int wl_pci_setup( struct pci_dev *pdev );
 135 void wl_pci_enable_cardbus_interrupts( struct pci_dev *pdev );
 136
 137 #ifdef ENABLE_DMA
 138 int wl_pci_dma_alloc( struct pci_dev *pdev, struct wl_private *lp );
 139 int wl_pci_dma_free( struct pci_dev *pdev, struct wl_private *lp );
 140 int wl_pci_dma_alloc_tx_packet( struct pci_dev *pdev, struct wl_private *lp,
 141                                 DESC_STRCT **desc );
 142 int wl_pci_dma_free_tx_packet( struct pci_dev *pdev, struct wl_private *lp,
 143                                 DESC_STRCT **desc );
 144 int wl_pci_dma_alloc_rx_packet( struct pci_dev *pdev, struct wl_private *lp,
 145                                 DESC_STRCT **desc );
 146 int wl_pci_dma_free_rx_packet( struct pci_dev *pdev, struct wl_private *lp,
 147                                 DESC_STRCT **desc );
 148 int wl_pci_dma_alloc_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp,
 149                                    DESC_STRCT **desc, int size );
 150 int wl_pci_dma_free_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp,
 151                                    DESC_STRCT **desc );
 152 int wl_pci_dma_alloc_desc( struct pci_dev *pdev, struct wl_private *lp,
 153                            DESC_STRCT **desc );
 154 int wl_pci_dma_free_desc( struct pci_dev *pdev, struct wl_private *lp,
 155                            DESC_STRCT **desc );
 156 int wl_pci_dma_alloc_buf( struct pci_dev *pdev, struct wl_private *lp,
 157                           DESC_STRCT *desc, int size );
 158 int wl_pci_dma_free_buf( struct pci_dev *pdev, struct wl_private *lp,
 159                           DESC_STRCT *desc );
 160
 161 void wl_pci_dma_hcf_reclaim_rx( struct wl_private *lp );
 162 #endif  // ENABLE_DMA
 163
 164 /*******************************************************************************
 165  * PCI module function registration
 166  ******************************************************************************/
 167 static struct pci_driver wl_driver =
 168 {
 169         name:           MODULE_NAME,
 170     id_table:   wl_pci_tbl,
 171         probe:          wl_pci_probe,
 172         remove:         __devexit_p(wl_pci_remove),
 173     suspend:    NULL,
 174     resume:     NULL,
 175 };
 176
 177 /*******************************************************************************
 178  *      wl_adapter_init_module()
 179  *******************************************************************************
 180  *
 181  *  DESCRIPTION:
 182  *
 183  *      Called by init_module() to perform PCI-specific driver initialization.
 184  *
 185  *  PARAMETERS:
 186  *
 187  *      N/A
 188  *
 189  *  RETURNS:
 190  *
 191  *      0
 192  *
 193  ******************************************************************************/
 194 int wl_adapter_init_module( void )
 195 {
 196     int result;
 197     /*------------------------------------------------------------------------*/
 198
 199     DBG_FUNC( "wl_adapter_init_module()" );
 200     DBG_ENTER( DbgInfo );
 201     DBG_TRACE( DbgInfo, "wl_adapter_init_module() -- PCI\n" );
 202
 203     result = pci_register_driver( &wl_driver ); //;?replace with pci_module_init, Rubini pg 490
 204         //;? why not do something with the result
 205
 206     DBG_LEAVE( DbgInfo );
 207     return 0;
 208 } // wl_adapter_init_module
 209 /*============================================================================*/
 210
 211 /*******************************************************************************
 212  *      wl_adapter_cleanup_module()
 213  *******************************************************************************
 214  *
 215  *  DESCRIPTION:
 216  *
 217  *      Called by cleanup_module() to perform PCI-specific driver cleanup.
 218  *
 219  *  PARAMETERS:
 220  *
 221  *      N/A
 222  *
 223  *  RETURNS:
 224  *
 225  *      N/A
 226  *
 227  ******************************************************************************/
 228 void wl_adapter_cleanup_module( void )
 229 {
 230         //;?how comes wl_adapter_cleanup_module is located in a seemingly pci specific module
 231     DBG_FUNC( "wl_adapter_cleanup_module" );
 232     DBG_ENTER( DbgInfo );
 233
 234         //;?DBG_TRACE below feels like nearly redundant in the light of DBG_ENTER above
 235     DBG_TRACE( DbgInfo, "wl_adapter_cleanup_module() -- PCI\n" );
 236
 237     pci_unregister_driver( &wl_driver );
 238
 239     DBG_LEAVE( DbgInfo );
 240     return;
 241 } // wl_adapter_cleanup_module
 242 /*============================================================================*/
 243
 244 /*******************************************************************************
 245  *      wl_adapter_insert()
 246  *******************************************************************************
 247  *
 248  *  DESCRIPTION:
 249  *
 250  *      Called by wl_pci_probe() to continue the process of device insertion.
 251  *
 252  *  PARAMETERS:
 253  *
 254  *      dev - a pointer to the device's net_device structure
 255  *
 256  *  RETURNS:
 257  *
 258  *      TRUE or FALSE
 259  *
 260  ******************************************************************************/
 261 int wl_adapter_insert( struct net_device *dev )
 262 {
 263     int result = FALSE;
 264     /*------------------------------------------------------------------------*/
 265
 266     DBG_FUNC( "wl_adapter_insert" );
 267     DBG_ENTER( DbgInfo );
 268
 269     DBG_TRACE( DbgInfo, "wl_adapter_insert() -- PCI\n" );
 270
 271     if( dev == NULL ) {
 272         DBG_ERROR( DbgInfo, "net_device pointer is NULL!!!\n" );
 273     } else if( dev->priv == NULL ) {
 274         DBG_ERROR( DbgInfo, "wl_private pointer is NULL!!!\n" );
 275     } else if( wl_insert( dev ) ) { /* Perform remaining device initialization */
 276                 result = TRUE;
 277         } else {
 278         DBG_TRACE( DbgInfo, "wl_insert() FAILED\n" );
 279     }
 280     DBG_LEAVE( DbgInfo );
 281     return result;
 282 } // wl_adapter_insert
 283 /*============================================================================*/
 284
 285 /*******************************************************************************
 286  *      wl_adapter_open()
 287  *******************************************************************************
 288  *
 289  *  DESCRIPTION:
 290  *
 291  *      Open the device.
 292  *
 293  *  PARAMETERS:
 294  *
 295  *      dev - a pointer to the device's net_device structure
 296  *
 297  *  RETURNS:
 298  *
 299  *      an HCF status code
 300  *
 301  ******************************************************************************/
 302 int wl_adapter_open( struct net_device *dev )
 303 {
 304     int         result = 0;
 305     int         hcf_status = HCF_SUCCESS;
 306     /*------------------------------------------------------------------------*/
 307
 308     DBG_FUNC( "wl_adapter_open" );
 309     DBG_ENTER( DbgInfo );
 310
 311     DBG_TRACE( DbgInfo, "wl_adapter_open() -- PCI\n" );
 312
 313     hcf_status = wl_open( dev );
 314
 315     if( hcf_status != HCF_SUCCESS ) {
 316         result = -ENODEV;
 317     }
 318
 319     DBG_LEAVE( DbgInfo );
 320     return result;
 321 } // wl_adapter_open
 322 /*============================================================================*/
 323
 324 /*******************************************************************************
 325  *      wl_adapter_close()
 326  *******************************************************************************
 327  *
 328  *  DESCRIPTION:
 329  *
 330  *      Close the device
 331  *
 332  *  PARAMETERS:
 333  *
 334  *      dev - a pointer to the device's net_device structure
 335  *
 336  *  RETURNS:
 337  *
 338  *      0
 339  *
 340  ******************************************************************************/
 341 int wl_adapter_close( struct net_device *dev )
 342 {
 343     DBG_FUNC( "wl_adapter_close" );
 344     DBG_ENTER( DbgInfo );
 345
 346     DBG_TRACE( DbgInfo, "wl_adapter_close() -- PCI\n" );
 347     DBG_TRACE( DbgInfo, "%s: Shutting down adapter.\n", dev->name );
 348
 349     wl_close( dev );
 350
 351     DBG_LEAVE( DbgInfo );
 352     return 0;
 353 } // wl_adapter_close
 354 /*============================================================================*/
 355
 356 /*******************************************************************************
 357  *      wl_adapter_is_open()
 358  *******************************************************************************
 359  *
 360  *  DESCRIPTION:
 361  *
 362  *      Check whether this device is open. Returns
 363  *
 364  *  PARAMETERS:
 365  *
 366  *      dev - a pointer to the device's net_device structure
 367  *
 368  *  RETURNS:
 369  *
 370  *      nonzero if device is open.
 371  *
 372  ******************************************************************************/
 373 int wl_adapter_is_open( struct net_device *dev )
 374 {
 375     /* This function is used in PCMCIA to check the status of the 'open' field
 376        in the dev_link_t structure associated with a network device. There
 377        doesn't seem to be an analog to this for PCI, and checking the status
 378        contained in the net_device structure doesn't have the same effect.
 379        For now, return TRUE, but find out if this is necessary for PCI. */
 380
 381     return TRUE;
 382 } // wl_adapter_is_open
 383 /*============================================================================*/
 384
 385 /*******************************************************************************
 386  *      wl_pci_probe()
 387  *******************************************************************************
 388  *
 389  *  DESCRIPTION:
 390  *
 391  *      Registered in the pci_driver structure, this function is called when the
 392  *  PCI subsystem finds a new PCI device which matches the infomation contained
 393  *  in the pci_device_id table.
 394  *
 395  *  PARAMETERS:
 396  *
 397  *      pdev    - a pointer to the device's pci_dev structure
 398  *      ent     - this device's entry in the pci_device_id table
 399  *
 400  *  RETURNS:
 401  *
 402  *      0 on success
 403  *      errno value otherwise
 404  *
 405  ******************************************************************************/
 406 int __devinit wl_pci_probe( struct pci_dev *pdev,
 407                                 const struct pci_device_id *ent )
 408 {
 409     int result;
 410     /*------------------------------------------------------------------------*/
 411
 412     DBG_FUNC( "wl_pci_probe" );
 413     DBG_ENTER( DbgInfo );
 414         DBG_PRINT( "%s\n", VERSION_INFO );
 415
 416     result = wl_pci_setup( pdev );
 417
 418     DBG_LEAVE( DbgInfo );
 419
 420     return result;
 421 } // wl_pci_probe
 422 /*============================================================================*/
 423
 424 /*******************************************************************************
 425  *      wl_pci_remove()
 426  *******************************************************************************
 427  *
 428  *  DESCRIPTION:
 429  *
 430  *      Registered in the pci_driver structure, this function is called when the
 431  *  PCI subsystem detects that a PCI device which matches the infomation
 432  *  contained in the pci_device_id table has been removed.
 433  *
 434  *  PARAMETERS:
 435  *
 436  *      pdev - a pointer to the device's pci_dev structure
 437  *
 438  *  RETURNS:
 439  *
 440  *      N/A
 441  *
 442  ******************************************************************************/
 443 void __devexit wl_pci_remove(struct pci_dev *pdev)
 444 {
 445     struct net_device       *dev = NULL;
 446     /*------------------------------------------------------------------------*/
 447
 448     DBG_FUNC( "wl_pci_remove" );
 449     DBG_ENTER( DbgInfo );
 450
 451     /* Make sure the pci_dev pointer passed in is valid */
 452     if( pdev == NULL ) {
 453         DBG_ERROR( DbgInfo, "PCI subsys passed in an invalid pci_dev pointer\n" );
 454         return;
 455     }
 456
 457     dev = (struct net_device *)pci_get_drvdata( pdev );
 458     if( dev == NULL ) {
 459         DBG_ERROR( DbgInfo, "Could not retrieve net_device structure\n" );
 460         return;
 461     }
 462
 463     /* Perform device cleanup */
 464     wl_remove( dev );
 465     free_irq( dev->irq, dev );
 466
 467 #ifdef ENABLE_DMA
 468     wl_pci_dma_free( pdev, (struct wl_private *)dev->priv );
 469 #endif
 470
 471     wl_device_dealloc( dev );
 472
 473     DBG_LEAVE( DbgInfo );
 474     return;
 475 } // wl_pci_remove
 476 /*============================================================================*/
 477
 478 /*******************************************************************************
 479  *      wl_pci_setup()
 480  *******************************************************************************
 481  *
 482  *  DESCRIPTION:
 483  *
 484  *      Called by wl_pci_probe() to begin a device's initialization process.
 485  *
 486  *  PARAMETERS:
 487  *
 488  *      pdev - a pointer to the device's pci_dev structure
 489  *
 490  *  RETURNS:
 491  *
 492  *      0 on success
 493  *      errno value otherwise
 494  *
 495  ******************************************************************************/
 496 int wl_pci_setup( struct pci_dev *pdev )
 497 {
 498     int                 result = 0;
 499     struct net_device   *dev = NULL;
 500     struct wl_private   *lp = NULL;
 501     /*------------------------------------------------------------------------*/
 502
 503     DBG_FUNC( "wl_pci_setup" );
 504     DBG_ENTER( DbgInfo );
 505
 506     /* Make sure the pci_dev pointer passed in is valid */
 507     if( pdev == NULL ) {
 508         DBG_ERROR( DbgInfo, "PCI subsys passed in an invalid pci_dev pointer\n" );
 509         return -ENODEV;
 510     }
 511
 512     result = pci_enable_device( pdev );
 513     if( result != 0 ) {
 514         DBG_ERROR( DbgInfo, "pci_enable_device() failed\n" );
 515         DBG_LEAVE( DbgInfo );
 516         return result;
 517     }
 518
 519     /* We found our device! Let's register it with the system */
 520     DBG_TRACE( DbgInfo, "Found our device, now registering\n" );
 521     dev = wl_device_alloc( );
 522     if( dev == NULL ) {
 523         DBG_ERROR( DbgInfo, "Could not register device!!!\n" );
 524         DBG_LEAVE( DbgInfo );
 525         return -ENOMEM;
 526     }
 527
 528     /* Make sure that space was allocated for our private adapter struct */
 529     if( dev->priv == NULL ) {
 530         DBG_ERROR( DbgInfo, "Private adapter struct was not allocated!!!\n" );
 531         DBG_LEAVE( DbgInfo );
 532         return -ENOMEM;
 533     }
 534
 535 #ifdef ENABLE_DMA
 536     /* Allocate DMA Descriptors */
 537     if( wl_pci_dma_alloc( pdev, (struct wl_private *)dev->priv ) < 0 ) {
 538         DBG_ERROR( DbgInfo, "Could not allocate DMA descriptor memory!!!\n" );
 539         DBG_LEAVE( DbgInfo );
 540         return -ENOMEM;
 541     }
 542 #endif
 543
 544     /* Register our private adapter structure with PCI */
 545     pci_set_drvdata( pdev, dev );
 546
 547     /* Fill out bus specific information in the net_device struct */
 548     dev->irq = pdev->irq;
 549     SET_MODULE_OWNER( dev );
 550
 551     DBG_TRACE( DbgInfo, "Device Base Address: %#03lx\n", pdev->resource[0].start );
 552         dev->base_addr = pdev->resource[0].start;
 553
 554     /* Initialize our device here */
 555     if( !wl_adapter_insert( dev )) {
 556         DBG_ERROR( DbgInfo, "wl_adapter_insert() FAILED!!!\n" );
 557         wl_device_dealloc( dev );
 558         DBG_LEAVE( DbgInfo );
 559         return -EINVAL;
 560     }
 561
 562     /* Register our ISR */
 563     DBG_TRACE( DbgInfo, "Registering ISR...\n" );
 564
 565     result = request_irq(dev->irq, wl_isr, SA_SHIRQ, dev->name, dev);
 566     if( result ) {
 567         DBG_WARNING( DbgInfo, "Could not register ISR!!!\n" );
 568         DBG_LEAVE( DbgInfo );
 569         return result;
 570         }
 571
 572     /* Make sure interrupts are enabled properly for CardBus */
 573     lp = (struct wl_private *)dev->priv;
 574
 575     if( lp->hcfCtx.IFB_BusType == CFG_NIC_BUS_TYPE_CARDBUS ||
 576             lp->hcfCtx.IFB_BusType == CFG_NIC_BUS_TYPE_PCI              ) {
 577         DBG_TRACE( DbgInfo, "This is a PCI/CardBus card, enable interrupts\n" );
 578         wl_pci_enable_cardbus_interrupts( pdev );
 579     }
 580
 581     /* Enable bus mastering */
 582     pci_set_master( pdev );
 583
 584     DBG_LEAVE( DbgInfo );
 585     return 0;
 586 } // wl_pci_setup
 587 /*============================================================================*/
 588
 589 /*******************************************************************************
 590  *      wl_pci_enable_cardbus_interrupts()
 591  *******************************************************************************
 592  *
 593  *  DESCRIPTION:
 594  *
 595  *      Called by wl_pci_setup() to enable interrupts on a CardBus device. This
 596  *  is done by writing bit 15 to the function event mask register. This
 597  *  CardBus-specific register is located in BAR2 (counting from BAR0), in memory
 598  *  space at byte offset 1f4 (7f4 for WARP).
 599  *
 600  *  PARAMETERS:
 601  *
 602  *      pdev - a pointer to the device's pci_dev structure
 603  *
 604  *  RETURNS:
 605  *
 606  *      N/A
 607  *
 608  ******************************************************************************/
 609 void wl_pci_enable_cardbus_interrupts( struct pci_dev *pdev )
 610 {
 611     u32                 bar2_reg;
 612     u32                 mem_addr_bus;
 613     u32                 func_evt_mask_reg;
 614     void                *mem_addr_kern = NULL;
 615     /*------------------------------------------------------------------------*/
 616
 617     DBG_FUNC( "wl_pci_enable_cardbus_interrupts" );
 618     DBG_ENTER( DbgInfo );
 619
 620     /* Initialize to known bad values */
 621     bar2_reg = 0xdeadbeef;
 622     mem_addr_bus = 0xdeadbeef;
 623
 624     /* Read the BAR2 register; this register contains the base address of the
 625        memory region where the function event mask register lives */
 626     pci_read_config_dword( pdev, PCI_BASE_ADDRESS_2, &bar2_reg );
 627     mem_addr_bus = bar2_reg & PCI_BASE_ADDRESS_MEM_MASK;
 628
 629     /* Once the base address is obtained, remap the memory region to kernel
 630        space so we can retrieve the register */
 631     mem_addr_kern = ioremap( mem_addr_bus, 0x200 );
 632
 633 #ifdef HERMES25
 634 #define REG_OFFSET  0x07F4
 635 #else
 636 #define REG_OFFSET  0x01F4
 637 #endif // HERMES25
 638
 639 #define BIT15       0x8000
 640
 641     /* Retrieve the functional event mask register, enable interrupts by
 642        setting Bit 15, and write back the value */
 643     func_evt_mask_reg = *(u32 *)( mem_addr_kern + REG_OFFSET );
 644     func_evt_mask_reg |= BIT15;
 645     *(u32 *)( mem_addr_kern + REG_OFFSET ) = func_evt_mask_reg;
 646
 647     /* Once complete, unmap the region and exit */
 648     iounmap( mem_addr_kern );
 649
 650     DBG_LEAVE( DbgInfo );
 651     return;
 652 } // wl_pci_enable_cardbus_interrupts
 653 /*============================================================================*/
 654
 655 #ifdef ENABLE_DMA
 656 /*******************************************************************************
 657  *      wl_pci_dma_alloc()
 658  *******************************************************************************
 659  *
 660  *  DESCRIPTION:
 661  *
 662  *      Allocates all resources needed for PCI/CardBus DMA operation
 663  *
 664  *  PARAMETERS:
 665  *
 666  *      pdev - a pointer to the device's pci_dev structure
 667  *      lp  - the device's private adapter structure
 668  *
 669  *  RETURNS:
 670  *
 671  *      0 on success
 672  *      errno value otherwise
 673  *
 674  ******************************************************************************/
 675 int wl_pci_dma_alloc( struct pci_dev *pdev, struct wl_private *lp )
 676 {
 677     int i;
 678     int status = 0;
 679     /*------------------------------------------------------------------------*/
 680
 681     DBG_FUNC( "wl_pci_dma_alloc" );
 682     DBG_ENTER( DbgInfo );
 683
 684 //     lp->dma.tx_rsc_ind = lp->dma.rx_rsc_ind = 0;
 685 //
 686 //     /* Alloc for the Tx chain and its reclaim descriptor */
 687 //     for( i = 0; i < NUM_TX_DESC; i++ ) {
 688 //         status = wl_pci_dma_alloc_tx_packet( pdev, lp, &lp->dma.tx_packet[i] );
 689 //         if( status == 0 ) {
 690 //             DBG_PRINT( "lp->dma.tx_packet[%d] :                 0x%p\n", i, lp->dma.tx_packet[i] );
 691 //             DBG_PRINT( "lp->dma.tx_packet[%d]->next_desc_addr : 0x%p\n", i, lp->dma.tx_packet[i]->next_desc_addr );
 692 //             lp->dma.tx_rsc_ind++;
 693 //         } else {
 694 //             DBG_ERROR( DbgInfo, "Could not alloc DMA Tx Packet\n" );
 695 //             break;
 696 //         }
 697 //     }
 698 //     if( status == 0 ) {
 699 //         status = wl_pci_dma_alloc_desc( pdev, lp, &lp->dma.tx_reclaim_desc );
 700 //         DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc );
 701 //     }
 702 //     /* Alloc for the Rx chain and its reclaim descriptor */
 703 //     if( status == 0 ) {
 704 //         for( i = 0; i < NUM_RX_DESC; i++ ) {
 705 //             status = wl_pci_dma_alloc_rx_packet( pdev, lp, &lp->dma.rx_packet[i] );
 706 //             if( status == 0 ) {
 707 //                 DBG_PRINT( "lp->dma.rx_packet[%d]                 : 0x%p\n", i, lp->dma.rx_packet[i] );
 708 //                 DBG_PRINT( "lp->dma.rx_packet[%d]->next_desc_addr : 0x%p\n", i, lp->dma.rx_packet[i]->next_desc_addr );
 709 //                 lp->dma.rx_rsc_ind++;
 710 //             } else {
 711 //                 DBG_ERROR( DbgInfo, "Could not alloc DMA Rx Packet\n" );
 712 //                 break;
 713 //             }
 714 //         }
 715 //     }
 716 //     if( status == 0 ) {
 717 //         status = wl_pci_dma_alloc_desc( pdev, lp, &lp->dma.rx_reclaim_desc );
 718 //         DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc );
 719 //     }
 720 //     /* Store status, as host should not call HCF functions if this fails */
 721 //     lp->dma.status = status;  //;?all useages of dma.status have been commented out
 722 //     DBG_LEAVE( DbgInfo );
 723     return status;
 724 } // wl_pci_dma_alloc
 725 /*============================================================================*/
 726
 727 /*******************************************************************************
 728  *      wl_pci_dma_free()
 729  *******************************************************************************
 730  *
 731  *  DESCRIPTION:
 732  *
 733  *      Deallocated all resources needed for PCI/CardBus DMA operation
 734  *
 735  *  PARAMETERS:
 736  *
 737  *      pdev - a pointer to the device's pci_dev structure
 738  *      lp  - the device's private adapter structure
 739  *
 740  *  RETURNS:
 741  *
 742  *      0 on success
 743  *      errno value otherwise
 744  *
 745  ******************************************************************************/
 746 int wl_pci_dma_free( struct pci_dev *pdev, struct wl_private *lp )
 747 {
 748     int i;
 749     int status = 0;
 750     /*------------------------------------------------------------------------*/
 751
 752     DBG_FUNC( "wl_pci_dma_free" );
 753     DBG_ENTER( DbgInfo );
 754
 755     /* Reclaim all Rx packets that were handed over to the HCF */
 756     /* Do I need to do this? Before this free is called, I've already disabled
 757        the port which will call wl_pci_dma_hcf_reclaim */
 758     //if( lp->dma.status == 0 )
 759     //{
 760     //    wl_pci_dma_hcf_reclaim( lp );
 761     //}
 762
 763     /* Free everything needed for DMA Rx */
 764     for( i = 0; i < NUM_RX_DESC; i++ ) {
 765         if( lp->dma.rx_packet[i] ) {
 766             status = wl_pci_dma_free_rx_packet( pdev, lp, &lp->dma.rx_packet[i] );
 767             if( status != 0 ) {
 768                 DBG_WARNING( DbgInfo, "Problem freeing Rx packet\n" );
 769             }
 770         }
 771     }
 772     lp->dma.rx_rsc_ind = 0;
 773
 774     if( lp->dma.rx_reclaim_desc ) {
 775         status = wl_pci_dma_free_desc( pdev, lp, &lp->dma.rx_reclaim_desc );
 776         if( status != 0 ) {
 777             DBG_WARNING( DbgInfo, "Problem freeing Rx reclaim descriptor\n" );
 778         }
 779     }
 780
 781     /* Free everything needed for DMA Tx */
 782     for( i = 0; i < NUM_TX_DESC; i++ ) {
 783         if( lp->dma.tx_packet[i] ) {
 784             status = wl_pci_dma_free_tx_packet( pdev, lp, &lp->dma.tx_packet[i] );
 785             if( status != 0 ) {
 786                 DBG_WARNING( DbgInfo, "Problem freeing Tx packet\n" );
 787             }
 788         }
 789     }
 790     lp->dma.tx_rsc_ind = 0;
 791
 792     if( lp->dma.tx_reclaim_desc ) {
 793         status = wl_pci_dma_free_desc( pdev, lp, &lp->dma.tx_reclaim_desc );
 794         if( status != 0 ) {
 795             DBG_WARNING( DbgInfo, "Problem freeing Tx reclaim descriptor\n" );
 796         }
 797     }
 798
 799     DBG_LEAVE( DbgInfo );
 800     return status;
 801 } // wl_pci_dma_free
 802
 803 /*============================================================================*/
 804
 805 /*******************************************************************************
 806  *      wl_pci_dma_alloc_tx_packet()
 807  *******************************************************************************
 808  *
 809  *  DESCRIPTION:
 810  *
 811  *      Allocates a single Tx packet, consisting of several descriptors and
 812  *      buffers. Data to transmit is first copied into the 'payload' buffer
 813  *      before being transmitted.
 814  *
 815  *  PARAMETERS:
 816  *
 817  *      pdev    - a pointer to the device's pci_dev structure
 818  *      lp      - the device's private adapter structure
 819  *      desc    - a pointer which will reference the descriptor to be alloc'd.
 820  *
 821  *  RETURNS:
 822  *
 823  *      0 on success
 824  *      errno value otherwise
 825  *
 826  ******************************************************************************/
 827 int wl_pci_dma_alloc_tx_packet( struct pci_dev *pdev, struct wl_private *lp,
 828                                 DESC_STRCT **desc )
 829 {
 830 //     int status = 0;
 831 //     /*------------------------------------------------------------------------*/
 832 //
 833 //     if( desc == NULL ) {
 834 //         status = -EFAULT;
 835 //     }
 836 //     if( status == 0 ) {
 837 //         status = wl_pci_dma_alloc_desc_and_buf( pdev, lp, desc,
 838 //                                                 HCF_DMA_TX_BUF1_SIZE );
 839 //
 840 //         if( status == 0 ) {
 841 //             status = wl_pci_dma_alloc_desc_and_buf( pdev, lp,
 842 //                                                     &( (*desc)->next_desc_addr ),
 843 //                                                     HCF_MAX_PACKET_SIZE );
 844 //         }
 845 //     }
 846 //     if( status == 0 ) {
 847 //         (*desc)->next_desc_phys_addr = (*desc)->next_desc_addr->desc_phys_addr;
 848 //     }
 849 //     return status;
 850 } // wl_pci_dma_alloc_tx_packet
 851 /*============================================================================*/
 852
 853 /*******************************************************************************
 854  *      wl_pci_dma_free_tx_packet()
 855  *******************************************************************************
 856  *
 857  *  DESCRIPTION:
 858  *
 859  *      Frees a single Tx packet, described in the corresponding alloc function.
 860  *
 861  *  PARAMETERS:
 862  *
 863  *      pdev    - a pointer to the device's pci_dev structure
 864  *      lp      - the device's private adapter structure
 865  *      desc    - a pointer which will reference the descriptor to be alloc'd.
 866  *
 867  *  RETURNS:
 868  *
 869  *      0 on success
 870  *      errno value otherwise
 871  *
 872  ******************************************************************************/
 873 int wl_pci_dma_free_tx_packet( struct pci_dev *pdev, struct wl_private *lp,
 874                                 DESC_STRCT **desc )
 875 {
 876     int status = 0;
 877     /*------------------------------------------------------------------------*/
 878
 879     if( *desc == NULL ) {
 880         DBG_PRINT( "Null descriptor\n" );
 881         status = -EFAULT;
 882     }
 883         //;?the "limited" NDIS strategy, assuming a frame consists ALWAYS out of 2
 884         //descriptors, make this robust
 885     if( status == 0 && (*desc)->next_desc_addr ) {
 886         status = wl_pci_dma_free_desc_and_buf( pdev, lp, &(*desc)->next_desc_addr );
 887     }
 888     if( status == 0 ) {
 889         status = wl_pci_dma_free_desc_and_buf( pdev, lp, desc );
 890     }
 891     return status;
 892 } // wl_pci_dma_free_tx_packet
 893 /*============================================================================*/
 894
 895 /*******************************************************************************
 896  *      wl_pci_dma_alloc_rx_packet()
 897  *******************************************************************************
 898  *
 899  *  DESCRIPTION:
 900  *
 901  *      Allocates a single Rx packet, consisting of two descriptors and one
 902  *      contiguous buffer. THe buffer starts with the hermes-specific header.
 903  *      One descriptor points at the start, the other at offset 0x3a of the
 904  *      buffer.
 905  *
 906  *  PARAMETERS:
 907  *
 908  *      pdev    - a pointer to the device's pci_dev structure
 909  *      lp      - the device's private adapter structure
 910  *      desc    - a pointer which will reference the descriptor to be alloc'd.
 911  *
 912  *  RETURNS:
 913  *
 914  *      0 on success
 915  *      errno value otherwise
 916  *
 917  ******************************************************************************/
 918 int wl_pci_dma_alloc_rx_packet( struct pci_dev *pdev, struct wl_private *lp,
 919                                 DESC_STRCT **desc )
 920 {
 921     int         status = 0;
 922     DESC_STRCT  *p;
 923     /*------------------------------------------------------------------------*/
 924
 925 //     if( desc == NULL ) {
 926 //         status = -EFAULT;
 927 //     }
 928 //      //;?the "limited" NDIS strategy, assuming a frame consists ALWAYS out of 2
 929 //      //descriptors, make this robust
 930 //     if( status == 0 ) {
 931 //         status = wl_pci_dma_alloc_desc( pdev, lp, desc );
 932 //      }
 933 //     if( status == 0 ) {
 934 //         status = wl_pci_dma_alloc_buf( pdev, lp, *desc, HCF_MAX_PACKET_SIZE );
 935 //     }
 936 //     if( status == 0 ) {
 937 //         status = wl_pci_dma_alloc_desc( pdev, lp, &p );
 938 //     }
 939 //     if( status == 0 ) {
 940 //         /* Size of 1st descriptor becomes 0x3a bytes */
 941 //         SET_BUF_SIZE( *desc, HCF_DMA_RX_BUF1_SIZE );
 942 //
 943 //         /* Make 2nd descriptor point at offset 0x3a of the buffer */
 944 //         SET_BUF_SIZE( p, ( HCF_MAX_PACKET_SIZE - HCF_DMA_RX_BUF1_SIZE ));
 945 //         p->buf_addr       = (*desc)->buf_addr + HCF_DMA_RX_BUF1_SIZE;
 946 //         p->buf_phys_addr  = (*desc)->buf_phys_addr + HCF_DMA_RX_BUF1_SIZE;
 947 //         p->next_desc_addr = NULL;
 948 //
 949 //         /* Chain 2nd descriptor to 1st descriptor */
 950 //         (*desc)->next_desc_addr      = p;
 951 //         (*desc)->next_desc_phys_addr = p->desc_phys_addr;
 952 //     }
 953
 954     return status;
 955 } // wl_pci_dma_alloc_rx_packet
 956 /*============================================================================*/
 957
 958 /*******************************************************************************
 959  *      wl_pci_dma_free_rx_packet()
 960  *******************************************************************************
 961  *
 962  *  DESCRIPTION:
 963  *
 964  *      Frees a single Rx packet, described in the corresponding alloc function.
 965  *
 966  *  PARAMETERS:
 967  *
 968  *      pdev    - a pointer to the device's pci_dev structure
 969  *      lp      - the device's private adapter structure
 970  *      desc    - a pointer which will reference the descriptor to be alloc'd.
 971  *
 972  *  RETURNS:
 973  *
 974  *      0 on success
 975  *      errno value otherwise
 976  *
 977  ******************************************************************************/
 978 int wl_pci_dma_free_rx_packet( struct pci_dev *pdev, struct wl_private *lp,
 979                                 DESC_STRCT **desc )
 980 {
 981     int status = 0;
 982     DESC_STRCT *p;
 983     /*------------------------------------------------------------------------*/
 984
 985     if( *desc == NULL ) {
 986         status = -EFAULT;
 987     }
 988     if( status == 0 ) {
 989         p = (*desc)->next_desc_addr;
 990
 991         /* Free the 2nd descriptor */
 992         if( p != NULL ) {
 993             p->buf_addr      = NULL;
 994             p->buf_phys_addr = 0;
 995
 996             status = wl_pci_dma_free_desc( pdev, lp, &p );
 997         }
 998     }
 999
1000     /* Free the buffer and 1st descriptor */
1001     if( status == 0 ) {
1002         SET_BUF_SIZE( *desc, HCF_MAX_PACKET_SIZE );
1003         status = wl_pci_dma_free_desc_and_buf( pdev, lp, desc );
1004     }
1005     return status;
1006 } // wl_pci_dma_free_rx_packet
1007 /*============================================================================*/
1008
1009 /*******************************************************************************
1010  *      wl_pci_dma_alloc_desc_and_buf()
1011  *******************************************************************************
1012  *
1013  *  DESCRIPTION:
1014  *
1015  *      Allocates a DMA descriptor and buffer, and associates them with one
1016  *      another.
1017  *
1018  *  PARAMETERS:
1019  *
1020  *      pdev  - a pointer to the device's pci_dev structure
1021  *      lp    - the device's private adapter structure
1022  *      desc  - a pointer which will reference the descriptor to be alloc'd
1023  *
1024  *  RETURNS:
1025  *
1026  *      0 on success
1027  *      errno value otherwise
1028  *
1029  ******************************************************************************/
1030 int wl_pci_dma_alloc_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp,
1031                                    DESC_STRCT **desc, int size )
1032 {
1033     int status = 0;
1034     /*------------------------------------------------------------------------*/
1035
1036 //     if( desc == NULL ) {
1037 //         status = -EFAULT;
1038 //     }
1039 //     if( status == 0 ) {
1040 //         status = wl_pci_dma_alloc_desc( pdev, lp, desc );
1041 //
1042 //         if( status == 0 ) {
1043 //             status = wl_pci_dma_alloc_buf( pdev, lp, *desc, size );
1044 //         }
1045 //     }
1046     return status;
1047 } // wl_pci_dma_alloc_desc_and_buf
1048 /*============================================================================*/
1049
1050 /*******************************************************************************
1051  *      wl_pci_dma_free_desc_and_buf()
1052  *******************************************************************************
1053  *
1054  *  DESCRIPTION:
1055  *
1056  *      Frees a DMA descriptor and associated buffer.
1057  *
1058  *  PARAMETERS:
1059  *
1060  *      pdev  - a pointer to the device's pci_dev structure
1061  *      lp    - the device's private adapter structure
1062  *      desc  - a pointer which will reference the descriptor to be alloc'd
1063  *
1064  *  RETURNS:
1065  *
1066  *      0 on success
1067  *      errno value otherwise
1068  *
1069  ******************************************************************************/
1070 int wl_pci_dma_free_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp,
1071                                    DESC_STRCT **desc )
1072 {
1073     int status = 0;
1074     /*------------------------------------------------------------------------*/
1075
1076     if( desc == NULL ) {
1077         status = -EFAULT;
1078     }
1079     if( status == 0 && *desc == NULL ) {
1080         status = -EFAULT;
1081     }
1082     if( status == 0 ) {
1083         status = wl_pci_dma_free_buf( pdev, lp, *desc );
1084
1085         if( status == 0 ) {
1086             status = wl_pci_dma_free_desc( pdev, lp, desc );
1087         }
1088     }
1089     return status;
1090 } // wl_pci_dma_free_desc_and_buf
1091 /*============================================================================*/
1092
1093 /*******************************************************************************
1094  *      wl_pci_dma_alloc_desc()
1095  *******************************************************************************
1096  *
1097  *  DESCRIPTION:
1098  *
1099  *      Allocates one DMA descriptor in cache coherent memory.
1100  *
1101  *  PARAMETERS:
1102  *
1103  *      pdev - a pointer to the device's pci_dev structure
1104  *      lp  - the device's private adapter structure
1105  *
1106  *  RETURNS:
1107  *
1108  *      0 on success
1109  *      errno value otherwise
1110  *
1111  ******************************************************************************/
1112 int wl_pci_dma_alloc_desc( struct pci_dev *pdev, struct wl_private *lp,
1113                            DESC_STRCT **desc )
1114 {
1115 //     int         status = 0;
1116 //     dma_addr_t  pa;
1117 //     /*------------------------------------------------------------------------*/
1118 //
1119 //     DBG_FUNC( "wl_pci_dma_alloc_desc" );
1120 //     DBG_ENTER( DbgInfo );
1121 //
1122 //     if( desc == NULL ) {
1123 //         status = -EFAULT;
1124 //     }
1125 //     if( status == 0 ) {
1126 //         *desc = pci_alloc_consistent( pdev, sizeof( DESC_STRCT ), &pa );
1127 //     }
1128 //     if( *desc == NULL ) {
1129 //         DBG_ERROR( DbgInfo, "pci_alloc_consistent() failed\n" );
1130 //         status = -ENOMEM;
1131 //     } else {
1132 //         memset( *desc, 0, sizeof( DESC_STRCT ));
1133 //         (*desc)->desc_phys_addr = cpu_to_le32( pa );
1134 //     }
1135 //     DBG_LEAVE( DbgInfo );
1136 //     return status;
1137 } // wl_pci_dma_alloc_desc
1138 /*============================================================================*/
1139
1140 /*******************************************************************************
1141  *      wl_pci_dma_free_desc()
1142  *******************************************************************************
1143  *
1144  *  DESCRIPTION:
1145  *
1146  *      Frees one DMA descriptor in cache coherent memory.
1147  *
1148  *  PARAMETERS:
1149  *
1150  *      pdev - a pointer to the device's pci_dev structure
1151  *      lp  - the device's private adapter structure
1152  *
1153  *  RETURNS:
1154  *
1155  *      0 on success
1156  *      errno value otherwise
1157  *
1158  ******************************************************************************/
1159 int wl_pci_dma_free_desc( struct pci_dev *pdev, struct wl_private *lp,
1160                            DESC_STRCT **desc )
1161 {
1162     int         status = 0;
1163     /*------------------------------------------------------------------------*/
1164
1165     if( *desc == NULL ) {
1166         status = -EFAULT;
1167     }
1168     if( status == 0 ) {
1169         pci_free_consistent( pdev, sizeof( DESC_STRCT ), *desc,
1170                              (*desc)->desc_phys_addr );
1171     }
1172     *desc = NULL;
1173     return status;
1174 } // wl_pci_dma_free_desc
1175 /*============================================================================*/
1176
1177 /*******************************************************************************
1178  *      wl_pci_dma_alloc_buf()
1179  *******************************************************************************
1180  *
1181  *  DESCRIPTION:
1182  *
1183  *      Allocates one DMA buffer in cache coherent memory, and associates a DMA
1184  *      descriptor with this buffer.
1185  *
1186  *  PARAMETERS:
1187  *
1188  *      pdev - a pointer to the device's pci_dev structure
1189  *      lp  - the device's private adapter structure
1190  *
1191  *  RETURNS:
1192  *
1193  *      0 on success
1194  *      errno value otherwise
1195  *
1196  ******************************************************************************/
1197 int wl_pci_dma_alloc_buf( struct pci_dev *pdev, struct wl_private *lp,
1198                           DESC_STRCT *desc, int size )
1199 {
1200     int         status = 0;
1201     dma_addr_t  pa;
1202     /*------------------------------------------------------------------------*/
1203
1204 //     DBG_FUNC( "wl_pci_dma_alloc_buf" );
1205 //     DBG_ENTER( DbgInfo );
1206 //
1207 //     if( desc == NULL ) {
1208 //         status = -EFAULT;
1209 //     }
1210 //     if( status == 0 && desc->buf_addr != NULL ) {
1211 //         status = -EFAULT;
1212 //     }
1213 //     if( status == 0 ) {
1214 //         desc->buf_addr = pci_alloc_consistent( pdev, size, &pa );
1215 //     }
1216 //     if( desc->buf_addr == NULL ) {
1217 //         DBG_ERROR( DbgInfo, "pci_alloc_consistent() failed\n" );
1218 //         status = -ENOMEM;
1219 //     } else {
1220 //         desc->buf_phys_addr = cpu_to_le32( pa );
1221 //         SET_BUF_SIZE( desc, size );
1222 //     }
1223 //     DBG_LEAVE( DbgInfo );
1224     return status;
1225 } // wl_pci_dma_alloc_buf
1226 /*============================================================================*/
1227
1228 /*******************************************************************************
1229  *      wl_pci_dma_free_buf()
1230  *******************************************************************************
1231  *
1232  *  DESCRIPTION:
1233  *
1234  *      Allocates one DMA buffer in cache coherent memory, and associates a DMA
1235  *      descriptor with this buffer.
1236  *
1237  *  PARAMETERS:
1238  *
1239  *      pdev - a pointer to the device's pci_dev structure
1240  *      lp  - the device's private adapter structure
1241  *
1242  *  RETURNS:
1243  *
1244  *      0 on success
1245  *      errno value otherwise
1246  *
1247  ******************************************************************************/
1248 int wl_pci_dma_free_buf( struct pci_dev *pdev, struct wl_private *lp,
1249                          DESC_STRCT *desc )
1250 {
1251     int         status = 0;
1252     /*------------------------------------------------------------------------*/
1253
1254     if( desc == NULL ) {
1255         status = -EFAULT;
1256     }
1257     if( status == 0 && desc->buf_addr == NULL ) {
1258         status = -EFAULT;
1259     }
1260     if( status == 0 ) {
1261         pci_free_consistent( pdev, GET_BUF_SIZE( desc ), desc->buf_addr,
1262                              desc->buf_phys_addr );
1263
1264         desc->buf_addr = 0;
1265         desc->buf_phys_addr = 0;
1266         SET_BUF_SIZE( desc, 0 );
1267     }
1268     return status;
1269 } // wl_pci_dma_free_buf
1270 /*============================================================================*/
1271
1272 /*******************************************************************************
1273  *      wl_pci_dma_hcf_supply()
1274  *******************************************************************************
1275  *
1276  *  DESCRIPTION:
1277  *
1278  *      Supply HCF with DMA-related resources. These consist of:
1279  *          - buffers and descriptors for receive purposes
1280  *          - one 'reclaim' descriptor for the transmit path, used to fulfill a
1281  *            certain H25 DMA engine requirement
1282  *          - one 'reclaim' descriptor for the receive path, used to fulfill a
1283  *            certain H25 DMA engine requirement
1284  *
1285  *      This function is called at start-of-day or at re-initialization.
1286  *
1287  *  PARAMETERS:
1288  *
1289  *      lp  - the device's private adapter structure
1290  *
1291  *  RETURNS:
1292  *
1293  *      0 on success
1294  *      errno value otherwise
1295  *
1296  ******************************************************************************/
1297 void wl_pci_dma_hcf_supply( struct wl_private *lp )
1298 {
1299     int i;
1300     /*------------------------------------------------------------------------*/
1301
1302     DBG_FUNC( "wl_pci_dma_hcf_supply" );
1303     DBG_ENTER( DbgInfo );
1304
1305     //if( lp->dma.status == 0 );
1306     //{
1307         /* Hand over the Rx/Tx reclaim descriptors to the HCF */
1308         if( lp->dma.tx_reclaim_desc ) {
1309             DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc );
1310             hcf_dma_tx_put( &lp->hcfCtx, lp->dma.tx_reclaim_desc, 0 );
1311             lp->dma.tx_reclaim_desc = NULL;
1312             DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc );
1313         }
1314         if( lp->dma.rx_reclaim_desc ) {
1315             DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc );
1316             hcf_dma_rx_put( &lp->hcfCtx, lp->dma.rx_reclaim_desc );
1317             lp->dma.rx_reclaim_desc = NULL;
1318             DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc );
1319         }
1320         /* Hand over the Rx descriptor chain to the HCF */
1321         for( i = 0; i < NUM_RX_DESC; i++ ) {
1322             DBG_PRINT( "lp->dma.rx_packet[%d]:    0x%p\n", i, lp->dma.rx_packet[i] );
1323             hcf_dma_rx_put( &lp->hcfCtx, lp->dma.rx_packet[i] );
1324             lp->dma.rx_packet[i] = NULL;
1325             DBG_PRINT( "lp->dma.rx_packet[%d]:    0x%p\n", i, lp->dma.rx_packet[i] );
1326         }
1327     //}
1328
1329     DBG_LEAVE( DbgInfo );
1330     return;
1331 } // wl_pci_dma_hcf_supply
1332 /*============================================================================*/
1333
1334 /*******************************************************************************
1335  *      wl_pci_dma_hcf_reclaim()
1336  *******************************************************************************
1337  *
1338  *  DESCRIPTION:
1339  *
1340  *      Return DMA-related resources from the HCF. These consist of:
1341  *          - buffers and descriptors for receive purposes
1342  *          - buffers and descriptors for transmit purposes
1343  *          - one 'reclaim' descriptor for the transmit path, used to fulfill a
1344  *            certain H25 DMA engine requirement
1345  *          - one 'reclaim' descriptor for the receive path, used to fulfill a
1346  *            certain H25 DMA engine requirement
1347  *
1348  *      This function is called at end-of-day or at re-initialization.
1349  *
1350  *  PARAMETERS:
1351  *
1352  *      lp  - the device's private adapter structure
1353  *
1354  *  RETURNS:
1355  *
1356  *      0 on success
1357  *      errno value otherwise
1358  *
1359  ******************************************************************************/
1360 void wl_pci_dma_hcf_reclaim( struct wl_private *lp )
1361 {
1362     int i;
1363     /*------------------------------------------------------------------------*/
1364
1365     DBG_FUNC( "wl_pci_dma_hcf_reclaim" );
1366     DBG_ENTER( DbgInfo );
1367
1368     wl_pci_dma_hcf_reclaim_rx( lp );
1369     for( i = 0; i < NUM_RX_DESC; i++ ) {
1370         DBG_PRINT( "rx_packet[%d] 0x%p\n", i, lp->dma.rx_packet[i] );
1371 //         if( lp->dma.rx_packet[i] == NULL ) {
1372 //             DBG_PRINT( "wl_pci_dma_hcf_reclaim: rx_packet[%d] NULL\n", i );
1373 //         }
1374     }
1375
1376     wl_pci_dma_hcf_reclaim_tx( lp );
1377     for( i = 0; i < NUM_TX_DESC; i++ ) {
1378         DBG_PRINT( "tx_packet[%d] 0x%p\n", i, lp->dma.tx_packet[i] );
1379 //         if( lp->dma.tx_packet[i] == NULL ) {
1380 //             DBG_PRINT( "wl_pci_dma_hcf_reclaim: tx_packet[%d] NULL\n", i );
1381 //         }
1382      }
1383
1384     DBG_LEAVE( DbgInfo );
1385     return;
1386 } // wl_pci_dma_hcf_reclaim
1387 /*============================================================================*/
1388
1389 /*******************************************************************************
1390  *      wl_pci_dma_hcf_reclaim_rx()
1391  *******************************************************************************
1392  *
1393  *  DESCRIPTION:
1394  *
1395  *      Reclaim Rx packets that have already been processed by the HCF.
1396  *
1397  *  PARAMETERS:
1398  *
1399  *      lp  - the device's private adapter structure
1400  *
1401  *  RETURNS:
1402  *
1403  *      0 on success
1404  *      errno value otherwise
1405  *
1406  ******************************************************************************/
1407 void wl_pci_dma_hcf_reclaim_rx( struct wl_private *lp )
1408 {
1409     int         i;
1410     DESC_STRCT *p;
1411     /*------------------------------------------------------------------------*/
1412
1413     DBG_FUNC( "wl_pci_dma_hcf_reclaim_rx" );
1414     DBG_ENTER( DbgInfo );
1415
1416     //if( lp->dma.status == 0 )
1417     //{
1418         while ( ( p = hcf_dma_rx_get( &lp->hcfCtx ) ) != NULL ) {
1419             if( p && p->buf_addr == NULL ) {
1420                 /* A reclaim descriptor is being given back by the HCF. Reclaim
1421                    descriptors have a NULL buf_addr */
1422                 lp->dma.rx_reclaim_desc = p;
1423                 DBG_PRINT( "reclaim_descriptor: 0x%p\n", p );
1424                 continue;
1425             }
1426             for( i = 0; i < NUM_RX_DESC; i++ ) {
1427                 if( lp->dma.rx_packet[i] == NULL ) {
1428                     break;
1429                 }
1430             }
1431             /* An Rx buffer descriptor is being given back by the HCF */
1432             lp->dma.rx_packet[i] = p;
1433             lp->dma.rx_rsc_ind++;
1434                 DBG_PRINT( "rx_packet[%d] 0x%p\n", i, lp->dma.rx_packet[i] );
1435         }
1436     //}
1437     DBG_LEAVE( DbgInfo );
1438 } // wl_pci_dma_hcf_reclaim_rx
1439 /*============================================================================*/
1440
1441 /*******************************************************************************
1442  *      wl_pci_dma_get_tx_packet()
1443  *******************************************************************************
1444  *
1445  *  DESCRIPTION:
1446  *
1447  *      Obtains a Tx descriptor from the chain to use for Tx.
1448  *
1449  *  PARAMETERS:
1450  *
1451  *      lp - a pointer to the device's wl_private structure.
1452  *
1453  *  RETURNS:
1454  *
1455  *      A pointer to the retrieved descriptor
1456  *
1457  ******************************************************************************/
1458 DESC_STRCT * wl_pci_dma_get_tx_packet( struct wl_private *lp )
1459 {
1460     int i;
1461     DESC_STRCT *desc = NULL;
1462     /*------------------------------------------------------------------------*/
1463
1464     for( i = 0; i < NUM_TX_DESC; i++ ) {
1465         if( lp->dma.tx_packet[i] ) {
1466             break;
1467         }
1468     }
1469
1470     if( i != NUM_TX_DESC ) {
1471         desc = lp->dma.tx_packet[i];
1472
1473         lp->dma.tx_packet[i] = NULL;
1474         lp->dma.tx_rsc_ind--;
1475
1476         memset( desc->buf_addr, 0, HCF_DMA_TX_BUF1_SIZE );
1477     }
1478
1479     return desc;
1480 } // wl_pci_dma_get_tx_packet
1481 /*============================================================================*/
1482
1483 /*******************************************************************************
1484  *      wl_pci_dma_put_tx_packet()
1485  *******************************************************************************
1486  *
1487  *  DESCRIPTION:
1488  *
1489  *      Returns a Tx descriptor to the chain.
1490  *
1491  *  PARAMETERS:
1492  *
1493  *      lp   - a pointer to the device's wl_private structure.
1494  *      desc - a pointer to the descriptor to return.
1495  *
1496  *  RETURNS:
1497  *
1498  *      N/A
1499  *
1500  ******************************************************************************/
1501 void wl_pci_dma_put_tx_packet( struct wl_private *lp, DESC_STRCT *desc )
1502 {
1503     int i;
1504     /*------------------------------------------------------------------------*/
1505
1506     for( i = 0; i < NUM_TX_DESC; i++ ) {
1507         if( lp->dma.tx_packet[i] == NULL ) {
1508             break;
1509         }
1510     }
1511
1512     if( i != NUM_TX_DESC ) {
1513         lp->dma.tx_packet[i] = desc;
1514         lp->dma.tx_rsc_ind++;
1515     }
1516 } // wl_pci_dma_put_tx_packet
1517 /*============================================================================*/
1518
1519 /*******************************************************************************
1520  *      wl_pci_dma_hcf_reclaim_tx()
1521  *******************************************************************************
1522  *
1523  *  DESCRIPTION:
1524  *
1525  *      Reclaim Tx packets that have either been processed by the HCF due to a
1526  *      port disable or a Tx completion.
1527  *
1528  *  PARAMETERS:
1529  *
1530  *      lp  - the device's private adapter structure
1531  *
1532  *  RETURNS:
1533  *
1534  *      0 on success
1535  *      errno value otherwise
1536  *
1537  ******************************************************************************/
1538 void wl_pci_dma_hcf_reclaim_tx( struct wl_private *lp )
1539 {
1540     int         i;
1541     DESC_STRCT *p;
1542     /*------------------------------------------------------------------------*/
1543
1544     DBG_FUNC( "wl_pci_dma_hcf_reclaim_tx" );
1545     DBG_ENTER( DbgInfo );
1546
1547     //if( lp->dma.status == 0 )
1548     //{
1549         while ( ( p = hcf_dma_tx_get( &lp->hcfCtx ) ) != NULL ) {
1550
1551             if( p != NULL && p->buf_addr == NULL ) {
1552                 /* A Reclaim descriptor is being given back by the HCF. Reclaim
1553                    descriptors have a NULL buf_addr */
1554                 lp->dma.tx_reclaim_desc = p;
1555                 DBG_PRINT( "reclaim_descriptor: 0x%p\n", p );
1556                 continue;
1557             }
1558             for( i = 0; i < NUM_TX_DESC; i++ ) {
1559                 if( lp->dma.tx_packet[i] == NULL ) {
1560                     break;
1561                 }
1562             }
1563             /* An Rx buffer descriptor is being given back by the HCF */
1564             lp->dma.tx_packet[i] = p;
1565             lp->dma.tx_rsc_ind++;
1566                 DBG_PRINT( "tx_packet[%d] 0x%p\n", i, lp->dma.tx_packet[i] );
1567         }
1568     //}
1569
1570     if( lp->netif_queue_on == FALSE ) {
1571         netif_wake_queue( lp->dev );
1572         WL_WDS_NETIF_WAKE_QUEUE( lp );
1573         lp->netif_queue_on = TRUE;
1574     }
1575     DBG_LEAVE( DbgInfo );
1576     return;
1577 } // wl_pci_dma_hcf_reclaim_tx
1578 /*============================================================================*/
1579 #endif  // ENABLE_DMA