2 * SAS Transport Layer for MPT (Message Passing Technology) based controllers
4 * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c
5 * Copyright (C) 2007-2009 LSI Corporation
6 * (mailto:DL-MPTFusionLinux@lsi.com)
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version 2
11 * of the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
19 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
20 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
21 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
22 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
23 * solely responsible for determining the appropriateness of using and
24 * distributing the Program and assumes all risks associated with its
25 * exercise of rights under this Agreement, including but not limited to
26 * the risks and costs of program errors, damage to or loss of data,
27 * programs or equipment, and unavailability or interruption of operations.
29 * DISCLAIMER OF LIABILITY
30 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
31 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
33 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
34 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
35 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
36 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
38 * You should have received a copy of the GNU General Public License
39 * along with this program; if not, write to the Free Software
40 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/init.h>
47 #include <linux/errno.h>
48 #include <linux/sched.h>
49 #include <linux/workqueue.h>
50 #include <linux/delay.h>
51 #include <linux/pci.h>
52 #include <linux/slab.h>
54 #include <scsi/scsi.h>
55 #include <scsi/scsi_cmnd.h>
56 #include <scsi/scsi_device.h>
57 #include <scsi/scsi_host.h>
58 #include <scsi/scsi_transport_sas.h>
59 #include <scsi/scsi_dbg.h>
61 #include "mpt2sas_base.h"
63 * _transport_sas_node_find_by_sas_address - sas node search
64 * @ioc: per adapter object
65 * @sas_address: sas address of expander or sas host
66 * Context: Calling function should acquire ioc->sas_node_lock.
68 * Search for either hba phys or expander device based on handle, then returns
69 * the sas_node object.
71 static struct _sas_node
*
72 _transport_sas_node_find_by_sas_address(struct MPT2SAS_ADAPTER
*ioc
,
75 if (ioc
->sas_hba
.sas_address
== sas_address
)
78 return mpt2sas_scsih_expander_find_by_sas_address(ioc
,
83 * _transport_convert_phy_link_rate -
84 * @link_rate: link rate returned from mpt firmware
86 * Convert link_rate from mpi fusion into sas_transport form.
88 static enum sas_linkrate
89 _transport_convert_phy_link_rate(u8 link_rate
)
94 case MPI2_SAS_NEG_LINK_RATE_1_5
:
95 rc
= SAS_LINK_RATE_1_5_GBPS
;
97 case MPI2_SAS_NEG_LINK_RATE_3_0
:
98 rc
= SAS_LINK_RATE_3_0_GBPS
;
100 case MPI2_SAS_NEG_LINK_RATE_6_0
:
101 rc
= SAS_LINK_RATE_6_0_GBPS
;
103 case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED
:
104 rc
= SAS_PHY_DISABLED
;
106 case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED
:
107 rc
= SAS_LINK_RATE_FAILED
;
109 case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR
:
110 rc
= SAS_SATA_PORT_SELECTOR
;
112 case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS
:
113 rc
= SAS_PHY_RESET_IN_PROGRESS
;
116 case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE
:
117 case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE
:
118 rc
= SAS_LINK_RATE_UNKNOWN
;
125 * _transport_set_identify - set identify for phys and end devices
126 * @ioc: per adapter object
127 * @handle: device handle
128 * @identify: sas identify info
130 * Populates sas identify info.
132 * Returns 0 for success, non-zero for failure.
135 _transport_set_identify(struct MPT2SAS_ADAPTER
*ioc
, u16 handle
,
136 struct sas_identify
*identify
)
138 Mpi2SasDevicePage0_t sas_device_pg0
;
139 Mpi2ConfigReply_t mpi_reply
;
143 if (ioc
->shost_recovery
) {
144 printk(MPT2SAS_INFO_FMT
"%s: host reset in progress!\n",
145 __func__
, ioc
->name
);
149 if ((mpt2sas_config_get_sas_device_pg0(ioc
, &mpi_reply
, &sas_device_pg0
,
150 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE
, handle
))) {
151 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
153 ioc
->name
, __FILE__
, __LINE__
, __func__
);
157 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
159 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
160 printk(MPT2SAS_ERR_FMT
"handle(0x%04x), ioc_status(0x%04x)"
161 "\nfailure at %s:%d/%s()!\n", ioc
->name
, handle
, ioc_status
,
162 __FILE__
, __LINE__
, __func__
);
166 memset(identify
, 0, sizeof(identify
));
167 device_info
= le32_to_cpu(sas_device_pg0
.DeviceInfo
);
170 identify
->sas_address
= le64_to_cpu(sas_device_pg0
.SASAddress
);
173 switch (device_info
& MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE
) {
174 case MPI2_SAS_DEVICE_INFO_NO_DEVICE
:
175 identify
->device_type
= SAS_PHY_UNUSED
;
177 case MPI2_SAS_DEVICE_INFO_END_DEVICE
:
178 identify
->device_type
= SAS_END_DEVICE
;
180 case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER
:
181 identify
->device_type
= SAS_EDGE_EXPANDER_DEVICE
;
183 case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER
:
184 identify
->device_type
= SAS_FANOUT_EXPANDER_DEVICE
;
188 /* initiator_port_protocols */
189 if (device_info
& MPI2_SAS_DEVICE_INFO_SSP_INITIATOR
)
190 identify
->initiator_port_protocols
|= SAS_PROTOCOL_SSP
;
191 if (device_info
& MPI2_SAS_DEVICE_INFO_STP_INITIATOR
)
192 identify
->initiator_port_protocols
|= SAS_PROTOCOL_STP
;
193 if (device_info
& MPI2_SAS_DEVICE_INFO_SMP_INITIATOR
)
194 identify
->initiator_port_protocols
|= SAS_PROTOCOL_SMP
;
195 if (device_info
& MPI2_SAS_DEVICE_INFO_SATA_HOST
)
196 identify
->initiator_port_protocols
|= SAS_PROTOCOL_SATA
;
198 /* target_port_protocols */
199 if (device_info
& MPI2_SAS_DEVICE_INFO_SSP_TARGET
)
200 identify
->target_port_protocols
|= SAS_PROTOCOL_SSP
;
201 if (device_info
& MPI2_SAS_DEVICE_INFO_STP_TARGET
)
202 identify
->target_port_protocols
|= SAS_PROTOCOL_STP
;
203 if (device_info
& MPI2_SAS_DEVICE_INFO_SMP_TARGET
)
204 identify
->target_port_protocols
|= SAS_PROTOCOL_SMP
;
205 if (device_info
& MPI2_SAS_DEVICE_INFO_SATA_DEVICE
)
206 identify
->target_port_protocols
|= SAS_PROTOCOL_SATA
;
212 * mpt2sas_transport_done - internal transport layer callback handler.
213 * @ioc: per adapter object
214 * @smid: system request message index
215 * @msix_index: MSIX table index supplied by the OS
216 * @reply: reply message frame(lower 32bit addr)
218 * Callback handler when sending internal generated transport cmds.
219 * The callback index passed is `ioc->transport_cb_idx`
221 * Return 1 meaning mf should be freed from _base_interrupt
222 * 0 means the mf is freed from this function.
225 mpt2sas_transport_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
228 MPI2DefaultReply_t
*mpi_reply
;
230 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
231 if (ioc
->transport_cmds
.status
== MPT2_CMD_NOT_USED
)
233 if (ioc
->transport_cmds
.smid
!= smid
)
235 ioc
->transport_cmds
.status
|= MPT2_CMD_COMPLETE
;
237 memcpy(ioc
->transport_cmds
.reply
, mpi_reply
,
238 mpi_reply
->MsgLength
*4);
239 ioc
->transport_cmds
.status
|= MPT2_CMD_REPLY_VALID
;
241 ioc
->transport_cmds
.status
&= ~MPT2_CMD_PENDING
;
242 complete(&ioc
->transport_cmds
.done
);
246 /* report manufacture request structure */
247 struct rep_manu_request
{
254 /* report manufacture reply structure */
255 struct rep_manu_reply
{
256 u8 smp_frame_type
; /* 0x41 */
257 u8 function
; /* 0x01 */
260 u16 expander_change_count
;
264 u8 vendor_id
[SAS_EXPANDER_VENDOR_ID_LEN
];
265 u8 product_id
[SAS_EXPANDER_PRODUCT_ID_LEN
];
266 u8 product_rev
[SAS_EXPANDER_PRODUCT_REV_LEN
];
267 u8 component_vendor_id
[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN
];
269 u8 component_revision_id
;
271 u8 vendor_specific
[8];
275 * _transport_expander_report_manufacture - obtain SMP report_manufacture
276 * @ioc: per adapter object
277 * @sas_address: expander sas address
278 * @edev: the sas_expander_device object
280 * Fills in the sas_expander_device object when SMP port is created.
282 * Returns 0 for success, non-zero for failure.
285 _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER
*ioc
,
286 u64 sas_address
, struct sas_expander_device
*edev
)
288 Mpi2SmpPassthroughRequest_t
*mpi_request
;
289 Mpi2SmpPassthroughReply_t
*mpi_reply
;
290 struct rep_manu_reply
*manufacture_reply
;
291 struct rep_manu_request
*manufacture_request
;
295 unsigned long timeleft
;
299 void *data_out
= NULL
;
300 dma_addr_t data_out_dma
;
303 u16 wait_state_count
;
305 if (ioc
->shost_recovery
) {
306 printk(MPT2SAS_INFO_FMT
"%s: host reset in progress!\n",
307 __func__
, ioc
->name
);
311 mutex_lock(&ioc
->transport_cmds
.mutex
);
313 if (ioc
->transport_cmds
.status
!= MPT2_CMD_NOT_USED
) {
314 printk(MPT2SAS_ERR_FMT
"%s: transport_cmds in use\n",
315 ioc
->name
, __func__
);
319 ioc
->transport_cmds
.status
= MPT2_CMD_PENDING
;
321 wait_state_count
= 0;
322 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
323 while (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
324 if (wait_state_count
++ == 10) {
325 printk(MPT2SAS_ERR_FMT
326 "%s: failed due to ioc not operational\n",
327 ioc
->name
, __func__
);
332 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
333 printk(MPT2SAS_INFO_FMT
"%s: waiting for "
334 "operational state(count=%d)\n", ioc
->name
,
335 __func__
, wait_state_count
);
337 if (wait_state_count
)
338 printk(MPT2SAS_INFO_FMT
"%s: ioc is operational\n",
339 ioc
->name
, __func__
);
341 smid
= mpt2sas_base_get_smid(ioc
, ioc
->transport_cb_idx
);
343 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
344 ioc
->name
, __func__
);
350 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
351 ioc
->transport_cmds
.smid
= smid
;
353 sz
= sizeof(struct rep_manu_request
) + sizeof(struct rep_manu_reply
);
354 data_out
= pci_alloc_consistent(ioc
->pdev
, sz
, &data_out_dma
);
357 printk(KERN_ERR
"failure at %s:%d/%s()!\n", __FILE__
,
360 mpt2sas_base_free_smid(ioc
, smid
);
364 manufacture_request
= data_out
;
365 manufacture_request
->smp_frame_type
= 0x40;
366 manufacture_request
->function
= 1;
367 manufacture_request
->reserved
= 0;
368 manufacture_request
->request_length
= 0;
370 memset(mpi_request
, 0, sizeof(Mpi2SmpPassthroughRequest_t
));
371 mpi_request
->Function
= MPI2_FUNCTION_SMP_PASSTHROUGH
;
372 mpi_request
->PhysicalPort
= 0xFF;
373 mpi_request
->VF_ID
= 0; /* TODO */
374 mpi_request
->VP_ID
= 0;
375 sas_address_le
= (u64
*)&mpi_request
->SASAddress
;
376 *sas_address_le
= cpu_to_le64(sas_address
);
377 mpi_request
->RequestDataLength
=
378 cpu_to_le16(sizeof(struct rep_manu_request
));
379 psge
= &mpi_request
->SGL
;
381 /* WRITE sgel first */
382 sgl_flags
= (MPI2_SGE_FLAGS_SIMPLE_ELEMENT
|
383 MPI2_SGE_FLAGS_END_OF_BUFFER
| MPI2_SGE_FLAGS_HOST_TO_IOC
);
384 sgl_flags
= sgl_flags
<< MPI2_SGE_FLAGS_SHIFT
;
385 ioc
->base_add_sg_single(psge
, sgl_flags
|
386 sizeof(struct rep_manu_request
), data_out_dma
);
389 psge
+= ioc
->sge_size
;
392 sgl_flags
= (MPI2_SGE_FLAGS_SIMPLE_ELEMENT
|
393 MPI2_SGE_FLAGS_LAST_ELEMENT
| MPI2_SGE_FLAGS_END_OF_BUFFER
|
394 MPI2_SGE_FLAGS_END_OF_LIST
);
395 sgl_flags
= sgl_flags
<< MPI2_SGE_FLAGS_SHIFT
;
396 ioc
->base_add_sg_single(psge
, sgl_flags
|
397 sizeof(struct rep_manu_reply
), data_out_dma
+
398 sizeof(struct rep_manu_request
));
400 dtransportprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"report_manufacture - "
401 "send to sas_addr(0x%016llx)\n", ioc
->name
,
402 (unsigned long long)sas_address
));
403 mpt2sas_base_put_smid_default(ioc
, smid
);
404 init_completion(&ioc
->transport_cmds
.done
);
405 timeleft
= wait_for_completion_timeout(&ioc
->transport_cmds
.done
,
408 if (!(ioc
->transport_cmds
.status
& MPT2_CMD_COMPLETE
)) {
409 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
410 ioc
->name
, __func__
);
411 _debug_dump_mf(mpi_request
,
412 sizeof(Mpi2SmpPassthroughRequest_t
)/4);
413 if (!(ioc
->transport_cmds
.status
& MPT2_CMD_RESET
))
415 goto issue_host_reset
;
418 dtransportprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"report_manufacture - "
419 "complete\n", ioc
->name
));
421 if (ioc
->transport_cmds
.status
& MPT2_CMD_REPLY_VALID
) {
424 mpi_reply
= ioc
->transport_cmds
.reply
;
426 dtransportprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
427 "report_manufacture - reply data transfer size(%d)\n",
428 ioc
->name
, le16_to_cpu(mpi_reply
->ResponseDataLength
)));
430 if (le16_to_cpu(mpi_reply
->ResponseDataLength
) !=
431 sizeof(struct rep_manu_reply
))
434 manufacture_reply
= data_out
+ sizeof(struct rep_manu_request
);
435 strncpy(edev
->vendor_id
, manufacture_reply
->vendor_id
,
436 SAS_EXPANDER_VENDOR_ID_LEN
);
437 strncpy(edev
->product_id
, manufacture_reply
->product_id
,
438 SAS_EXPANDER_PRODUCT_ID_LEN
);
439 strncpy(edev
->product_rev
, manufacture_reply
->product_rev
,
440 SAS_EXPANDER_PRODUCT_REV_LEN
);
441 edev
->level
= manufacture_reply
->sas_format
& 1;
443 strncpy(edev
->component_vendor_id
,
444 manufacture_reply
->component_vendor_id
,
445 SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN
);
446 tmp
= (u8
*)&manufacture_reply
->component_id
;
447 edev
->component_id
= tmp
[0] << 8 | tmp
[1];
448 edev
->component_revision_id
=
449 manufacture_reply
->component_revision_id
;
452 dtransportprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
453 "report_manufacture - no reply\n", ioc
->name
));
457 mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
460 ioc
->transport_cmds
.status
= MPT2_CMD_NOT_USED
;
462 pci_free_consistent(ioc
->pdev
, sz
, data_out
, data_out_dma
);
464 mutex_unlock(&ioc
->transport_cmds
.mutex
);
469 * mpt2sas_transport_port_add - insert port to the list
470 * @ioc: per adapter object
471 * @handle: handle of attached device
472 * @sas_address: sas address of parent expander or sas host
473 * Context: This function will acquire ioc->sas_node_lock.
475 * Adding new port object to the sas_node->sas_port_list.
477 * Returns mpt2sas_port.
480 mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER
*ioc
, u16 handle
,
483 struct _sas_phy
*mpt2sas_phy
, *next
;
484 struct _sas_port
*mpt2sas_port
;
486 struct _sas_node
*sas_node
;
487 struct sas_rphy
*rphy
;
489 struct sas_port
*port
;
491 mpt2sas_port
= kzalloc(sizeof(struct _sas_port
),
494 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
495 ioc
->name
, __FILE__
, __LINE__
, __func__
);
499 INIT_LIST_HEAD(&mpt2sas_port
->port_list
);
500 INIT_LIST_HEAD(&mpt2sas_port
->phy_list
);
501 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
502 sas_node
= _transport_sas_node_find_by_sas_address(ioc
, sas_address
);
503 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
506 printk(MPT2SAS_ERR_FMT
"%s: Could not find "
507 "parent sas_address(0x%016llx)!\n", ioc
->name
,
508 __func__
, (unsigned long long)sas_address
);
512 if ((_transport_set_identify(ioc
, handle
,
513 &mpt2sas_port
->remote_identify
))) {
514 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
515 ioc
->name
, __FILE__
, __LINE__
, __func__
);
519 if (mpt2sas_port
->remote_identify
.device_type
== SAS_PHY_UNUSED
) {
520 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
521 ioc
->name
, __FILE__
, __LINE__
, __func__
);
525 for (i
= 0; i
< sas_node
->num_phys
; i
++) {
526 if (sas_node
->phy
[i
].remote_identify
.sas_address
!=
527 mpt2sas_port
->remote_identify
.sas_address
)
529 list_add_tail(&sas_node
->phy
[i
].port_siblings
,
530 &mpt2sas_port
->phy_list
);
531 mpt2sas_port
->num_phys
++;
534 if (!mpt2sas_port
->num_phys
) {
535 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
536 ioc
->name
, __FILE__
, __LINE__
, __func__
);
540 port
= sas_port_alloc_num(sas_node
->parent_dev
);
541 if ((sas_port_add(port
))) {
542 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
543 ioc
->name
, __FILE__
, __LINE__
, __func__
);
547 list_for_each_entry(mpt2sas_phy
, &mpt2sas_port
->phy_list
,
549 if ((ioc
->logging_level
& MPT_DEBUG_TRANSPORT
))
550 dev_printk(KERN_INFO
, &port
->dev
, "add: handle(0x%04x)"
551 ", sas_addr(0x%016llx), phy(%d)\n", handle
,
553 mpt2sas_port
->remote_identify
.sas_address
,
554 mpt2sas_phy
->phy_id
);
555 sas_port_add_phy(port
, mpt2sas_phy
->phy
);
558 mpt2sas_port
->port
= port
;
559 if (mpt2sas_port
->remote_identify
.device_type
== SAS_END_DEVICE
)
560 rphy
= sas_end_device_alloc(port
);
562 rphy
= sas_expander_alloc(port
,
563 mpt2sas_port
->remote_identify
.device_type
);
565 rphy
->identify
= mpt2sas_port
->remote_identify
;
566 if ((sas_rphy_add(rphy
))) {
567 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
568 ioc
->name
, __FILE__
, __LINE__
, __func__
);
570 if ((ioc
->logging_level
& MPT_DEBUG_TRANSPORT
))
571 dev_printk(KERN_INFO
, &rphy
->dev
, "add: handle(0x%04x), "
572 "sas_addr(0x%016llx)\n", handle
,
574 mpt2sas_port
->remote_identify
.sas_address
);
575 mpt2sas_port
->rphy
= rphy
;
576 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
577 list_add_tail(&mpt2sas_port
->port_list
, &sas_node
->sas_port_list
);
578 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
580 /* fill in report manufacture */
581 if (mpt2sas_port
->remote_identify
.device_type
==
582 MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER
||
583 mpt2sas_port
->remote_identify
.device_type
==
584 MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER
)
585 _transport_expander_report_manufacture(ioc
,
586 mpt2sas_port
->remote_identify
.sas_address
,
587 rphy_to_expander_device(rphy
));
592 list_for_each_entry_safe(mpt2sas_phy
, next
, &mpt2sas_port
->phy_list
,
594 list_del(&mpt2sas_phy
->port_siblings
);
600 * mpt2sas_transport_port_remove - remove port from the list
601 * @ioc: per adapter object
602 * @sas_address: sas address of attached device
603 * @sas_address_parent: sas address of parent expander or sas host
604 * Context: This function will acquire ioc->sas_node_lock.
606 * Removing object and freeing associated memory from the
607 * ioc->sas_port_list.
612 mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER
*ioc
, u64 sas_address
,
613 u64 sas_address_parent
)
617 struct _sas_port
*mpt2sas_port
, *next
;
618 struct _sas_node
*sas_node
;
620 struct _sas_phy
*mpt2sas_phy
, *next_phy
;
622 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
623 sas_node
= _transport_sas_node_find_by_sas_address(ioc
,
625 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
628 list_for_each_entry_safe(mpt2sas_port
, next
, &sas_node
->sas_port_list
,
630 if (mpt2sas_port
->remote_identify
.sas_address
!= sas_address
)
633 list_del(&mpt2sas_port
->port_list
);
640 for (i
= 0; i
< sas_node
->num_phys
; i
++) {
641 if (sas_node
->phy
[i
].remote_identify
.sas_address
== sas_address
)
642 memset(&sas_node
->phy
[i
].remote_identify
, 0 ,
643 sizeof(struct sas_identify
));
646 list_for_each_entry_safe(mpt2sas_phy
, next_phy
,
647 &mpt2sas_port
->phy_list
, port_siblings
) {
648 if ((ioc
->logging_level
& MPT_DEBUG_TRANSPORT
))
649 dev_printk(KERN_INFO
, &mpt2sas_port
->port
->dev
,
650 "remove: sas_addr(0x%016llx), phy(%d)\n",
652 mpt2sas_port
->remote_identify
.sas_address
,
653 mpt2sas_phy
->phy_id
);
654 sas_port_delete_phy(mpt2sas_port
->port
, mpt2sas_phy
->phy
);
655 list_del(&mpt2sas_phy
->port_siblings
);
657 sas_port_delete(mpt2sas_port
->port
);
662 * mpt2sas_transport_add_host_phy - report sas_host phy to transport
663 * @ioc: per adapter object
664 * @mpt2sas_phy: mpt2sas per phy object
665 * @phy_pg0: sas phy page 0
666 * @parent_dev: parent device class object
668 * Returns 0 for success, non-zero for failure.
671 mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER
*ioc
, struct _sas_phy
672 *mpt2sas_phy
, Mpi2SasPhyPage0_t phy_pg0
, struct device
*parent_dev
)
675 int phy_index
= mpt2sas_phy
->phy_id
;
678 INIT_LIST_HEAD(&mpt2sas_phy
->port_siblings
);
679 phy
= sas_phy_alloc(parent_dev
, phy_index
);
681 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
682 ioc
->name
, __FILE__
, __LINE__
, __func__
);
685 if ((_transport_set_identify(ioc
, mpt2sas_phy
->handle
,
686 &mpt2sas_phy
->identify
))) {
687 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
688 ioc
->name
, __FILE__
, __LINE__
, __func__
);
691 phy
->identify
= mpt2sas_phy
->identify
;
692 mpt2sas_phy
->attached_handle
= le16_to_cpu(phy_pg0
.AttachedDevHandle
);
693 if (mpt2sas_phy
->attached_handle
)
694 _transport_set_identify(ioc
, mpt2sas_phy
->attached_handle
,
695 &mpt2sas_phy
->remote_identify
);
696 phy
->identify
.phy_identifier
= mpt2sas_phy
->phy_id
;
697 phy
->negotiated_linkrate
= _transport_convert_phy_link_rate(
698 phy_pg0
.NegotiatedLinkRate
& MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL
);
699 phy
->minimum_linkrate_hw
= _transport_convert_phy_link_rate(
700 phy_pg0
.HwLinkRate
& MPI2_SAS_HWRATE_MIN_RATE_MASK
);
701 phy
->maximum_linkrate_hw
= _transport_convert_phy_link_rate(
702 phy_pg0
.HwLinkRate
>> 4);
703 phy
->minimum_linkrate
= _transport_convert_phy_link_rate(
704 phy_pg0
.ProgrammedLinkRate
& MPI2_SAS_PRATE_MIN_RATE_MASK
);
705 phy
->maximum_linkrate
= _transport_convert_phy_link_rate(
706 phy_pg0
.ProgrammedLinkRate
>> 4);
708 if ((sas_phy_add(phy
))) {
709 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
710 ioc
->name
, __FILE__
, __LINE__
, __func__
);
714 if ((ioc
->logging_level
& MPT_DEBUG_TRANSPORT
))
715 dev_printk(KERN_INFO
, &phy
->dev
,
716 "add: handle(0x%04x), sas_addr(0x%016llx)\n"
717 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
718 mpt2sas_phy
->handle
, (unsigned long long)
719 mpt2sas_phy
->identify
.sas_address
,
720 mpt2sas_phy
->attached_handle
,
722 mpt2sas_phy
->remote_identify
.sas_address
);
723 mpt2sas_phy
->phy
= phy
;
729 * mpt2sas_transport_add_expander_phy - report expander phy to transport
730 * @ioc: per adapter object
731 * @mpt2sas_phy: mpt2sas per phy object
732 * @expander_pg1: expander page 1
733 * @parent_dev: parent device class object
735 * Returns 0 for success, non-zero for failure.
738 mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER
*ioc
, struct _sas_phy
739 *mpt2sas_phy
, Mpi2ExpanderPage1_t expander_pg1
, struct device
*parent_dev
)
742 int phy_index
= mpt2sas_phy
->phy_id
;
744 INIT_LIST_HEAD(&mpt2sas_phy
->port_siblings
);
745 phy
= sas_phy_alloc(parent_dev
, phy_index
);
747 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
748 ioc
->name
, __FILE__
, __LINE__
, __func__
);
751 if ((_transport_set_identify(ioc
, mpt2sas_phy
->handle
,
752 &mpt2sas_phy
->identify
))) {
753 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
754 ioc
->name
, __FILE__
, __LINE__
, __func__
);
757 phy
->identify
= mpt2sas_phy
->identify
;
758 mpt2sas_phy
->attached_handle
=
759 le16_to_cpu(expander_pg1
.AttachedDevHandle
);
760 if (mpt2sas_phy
->attached_handle
)
761 _transport_set_identify(ioc
, mpt2sas_phy
->attached_handle
,
762 &mpt2sas_phy
->remote_identify
);
763 phy
->identify
.phy_identifier
= mpt2sas_phy
->phy_id
;
764 phy
->negotiated_linkrate
= _transport_convert_phy_link_rate(
765 expander_pg1
.NegotiatedLinkRate
&
766 MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL
);
767 phy
->minimum_linkrate_hw
= _transport_convert_phy_link_rate(
768 expander_pg1
.HwLinkRate
& MPI2_SAS_HWRATE_MIN_RATE_MASK
);
769 phy
->maximum_linkrate_hw
= _transport_convert_phy_link_rate(
770 expander_pg1
.HwLinkRate
>> 4);
771 phy
->minimum_linkrate
= _transport_convert_phy_link_rate(
772 expander_pg1
.ProgrammedLinkRate
& MPI2_SAS_PRATE_MIN_RATE_MASK
);
773 phy
->maximum_linkrate
= _transport_convert_phy_link_rate(
774 expander_pg1
.ProgrammedLinkRate
>> 4);
776 if ((sas_phy_add(phy
))) {
777 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
778 ioc
->name
, __FILE__
, __LINE__
, __func__
);
782 if ((ioc
->logging_level
& MPT_DEBUG_TRANSPORT
))
783 dev_printk(KERN_INFO
, &phy
->dev
,
784 "add: handle(0x%04x), sas_addr(0x%016llx)\n"
785 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
786 mpt2sas_phy
->handle
, (unsigned long long)
787 mpt2sas_phy
->identify
.sas_address
,
788 mpt2sas_phy
->attached_handle
,
790 mpt2sas_phy
->remote_identify
.sas_address
);
791 mpt2sas_phy
->phy
= phy
;
796 * mpt2sas_transport_update_links - refreshing phy link changes
797 * @ioc: per adapter object
798 * @sas_address: sas address of parent expander or sas host
799 * @handle: attached device handle
800 * @phy_numberv: phy number
801 * @link_rate: new link rate
806 mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER
*ioc
,
807 u64 sas_address
, u16 handle
, u8 phy_number
, u8 link_rate
)
810 struct _sas_node
*sas_node
;
811 struct _sas_phy
*mpt2sas_phy
;
813 if (ioc
->shost_recovery
)
816 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
817 sas_node
= _transport_sas_node_find_by_sas_address(ioc
, sas_address
);
818 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
822 mpt2sas_phy
= &sas_node
->phy
[phy_number
];
823 mpt2sas_phy
->attached_handle
= handle
;
824 if (handle
&& (link_rate
>= MPI2_SAS_NEG_LINK_RATE_1_5
))
825 _transport_set_identify(ioc
, handle
,
826 &mpt2sas_phy
->remote_identify
);
828 memset(&mpt2sas_phy
->remote_identify
, 0 , sizeof(struct
831 if (mpt2sas_phy
->phy
)
832 mpt2sas_phy
->phy
->negotiated_linkrate
=
833 _transport_convert_phy_link_rate(link_rate
);
835 if ((ioc
->logging_level
& MPT_DEBUG_TRANSPORT
))
836 dev_printk(KERN_INFO
, &mpt2sas_phy
->phy
->dev
,
837 "refresh: parent sas_addr(0x%016llx),\n"
838 "\tlink_rate(0x%02x), phy(%d)\n"
839 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
840 (unsigned long long)sas_address
,
841 link_rate
, phy_number
, handle
, (unsigned long long)
842 mpt2sas_phy
->remote_identify
.sas_address
);
846 phy_to_ioc(struct sas_phy
*phy
)
848 struct Scsi_Host
*shost
= dev_to_shost(phy
->dev
.parent
);
849 return shost_priv(shost
);
853 rphy_to_ioc(struct sas_rphy
*rphy
)
855 struct Scsi_Host
*shost
= dev_to_shost(rphy
->dev
.parent
->parent
);
856 return shost_priv(shost
);
859 static struct _sas_phy
*
860 _transport_find_local_phy(struct MPT2SAS_ADAPTER
*ioc
, struct sas_phy
*phy
)
864 for (i
= 0; i
< ioc
->sas_hba
.num_phys
; i
++)
865 if (ioc
->sas_hba
.phy
[i
].phy
== phy
)
866 return(&ioc
->sas_hba
.phy
[i
]);
871 * _transport_get_linkerrors -
872 * @phy: The sas phy object
874 * Only support sas_host direct attached phys.
875 * Returns 0 for success, non-zero for failure.
879 _transport_get_linkerrors(struct sas_phy
*phy
)
881 struct MPT2SAS_ADAPTER
*ioc
= phy_to_ioc(phy
);
882 struct _sas_phy
*mpt2sas_phy
;
883 Mpi2ConfigReply_t mpi_reply
;
884 Mpi2SasPhyPage1_t phy_pg1
;
886 mpt2sas_phy
= _transport_find_local_phy(ioc
, phy
);
888 if (!mpt2sas_phy
) /* this phy not on sas_host */
891 if ((mpt2sas_config_get_phy_pg1(ioc
, &mpi_reply
, &phy_pg1
,
892 mpt2sas_phy
->phy_id
))) {
893 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
894 ioc
->name
, __FILE__
, __LINE__
, __func__
);
898 if (mpi_reply
.IOCStatus
|| mpi_reply
.IOCLogInfo
)
899 printk(MPT2SAS_INFO_FMT
"phy(%d), ioc_status"
900 "(0x%04x), loginfo(0x%08x)\n", ioc
->name
,
902 le16_to_cpu(mpi_reply
.IOCStatus
),
903 le32_to_cpu(mpi_reply
.IOCLogInfo
));
905 phy
->invalid_dword_count
= le32_to_cpu(phy_pg1
.InvalidDwordCount
);
906 phy
->running_disparity_error_count
=
907 le32_to_cpu(phy_pg1
.RunningDisparityErrorCount
);
908 phy
->loss_of_dword_sync_count
=
909 le32_to_cpu(phy_pg1
.LossDwordSynchCount
);
910 phy
->phy_reset_problem_count
=
911 le32_to_cpu(phy_pg1
.PhyResetProblemCount
);
916 * _transport_get_enclosure_identifier -
917 * @phy: The sas phy object
919 * Obtain the enclosure logical id for an expander.
920 * Returns 0 for success, non-zero for failure.
923 _transport_get_enclosure_identifier(struct sas_rphy
*rphy
, u64
*identifier
)
925 struct MPT2SAS_ADAPTER
*ioc
= rphy_to_ioc(rphy
);
926 struct _sas_node
*sas_expander
;
929 spin_lock_irqsave(&ioc
->sas_node_lock
, flags
);
930 sas_expander
= mpt2sas_scsih_expander_find_by_sas_address(ioc
,
931 rphy
->identify
.sas_address
);
932 spin_unlock_irqrestore(&ioc
->sas_node_lock
, flags
);
937 *identifier
= sas_expander
->enclosure_logical_id
;
942 * _transport_get_bay_identifier -
943 * @phy: The sas phy object
945 * Returns the slot id for a device that resides inside an enclosure.
948 _transport_get_bay_identifier(struct sas_rphy
*rphy
)
950 struct MPT2SAS_ADAPTER
*ioc
= rphy_to_ioc(rphy
);
951 struct _sas_device
*sas_device
;
954 spin_lock_irqsave(&ioc
->sas_device_lock
, flags
);
955 sas_device
= mpt2sas_scsih_sas_device_find_by_sas_address(ioc
,
956 rphy
->identify
.sas_address
);
957 spin_unlock_irqrestore(&ioc
->sas_device_lock
, flags
);
962 return sas_device
->slot
;
966 * _transport_phy_reset -
967 * @phy: The sas phy object
970 * Only support sas_host direct attached phys.
971 * Returns 0 for success, non-zero for failure.
974 _transport_phy_reset(struct sas_phy
*phy
, int hard_reset
)
976 struct MPT2SAS_ADAPTER
*ioc
= phy_to_ioc(phy
);
977 struct _sas_phy
*mpt2sas_phy
;
978 Mpi2SasIoUnitControlReply_t mpi_reply
;
979 Mpi2SasIoUnitControlRequest_t mpi_request
;
981 mpt2sas_phy
= _transport_find_local_phy(ioc
, phy
);
983 if (!mpt2sas_phy
) /* this phy not on sas_host */
986 memset(&mpi_request
, 0, sizeof(Mpi2SasIoUnitControlReply_t
));
987 mpi_request
.Function
= MPI2_FUNCTION_SAS_IO_UNIT_CONTROL
;
988 mpi_request
.Operation
= hard_reset
?
989 MPI2_SAS_OP_PHY_HARD_RESET
: MPI2_SAS_OP_PHY_LINK_RESET
;
990 mpi_request
.PhyNum
= mpt2sas_phy
->phy_id
;
992 if ((mpt2sas_base_sas_iounit_control(ioc
, &mpi_reply
, &mpi_request
))) {
993 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
994 ioc
->name
, __FILE__
, __LINE__
, __func__
);
998 if (mpi_reply
.IOCStatus
|| mpi_reply
.IOCLogInfo
)
999 printk(MPT2SAS_INFO_FMT
"phy(%d), ioc_status"
1000 "(0x%04x), loginfo(0x%08x)\n", ioc
->name
,
1001 mpt2sas_phy
->phy_id
,
1002 le16_to_cpu(mpi_reply
.IOCStatus
),
1003 le32_to_cpu(mpi_reply
.IOCLogInfo
));
1009 * _transport_phy_enable - enable/disable phys
1010 * @phy: The sas phy object
1011 * @enable: enable phy when true
1013 * Only support sas_host direct attached phys.
1014 * Returns 0 for success, non-zero for failure.
1017 _transport_phy_enable(struct sas_phy
*phy
, int enable
)
1019 struct MPT2SAS_ADAPTER
*ioc
= phy_to_ioc(phy
);
1020 struct _sas_phy
*mpt2sas_phy
;
1021 Mpi2SasIOUnitPage1_t
*sas_iounit_pg1
= NULL
;
1022 Mpi2ConfigReply_t mpi_reply
;
1027 mpt2sas_phy
= _transport_find_local_phy(ioc
, phy
);
1029 if (!mpt2sas_phy
) /* this phy not on sas_host */
1032 /* sas_iounit page 1 */
1033 sz
= offsetof(Mpi2SasIOUnitPage1_t
, PhyData
) + (ioc
->sas_hba
.num_phys
*
1034 sizeof(Mpi2SasIOUnit1PhyData_t
));
1035 sas_iounit_pg1
= kzalloc(sz
, GFP_KERNEL
);
1036 if (!sas_iounit_pg1
) {
1037 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
1038 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1042 if ((mpt2sas_config_get_sas_iounit_pg1(ioc
, &mpi_reply
,
1043 sas_iounit_pg1
, sz
))) {
1044 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
1045 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1049 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
1050 MPI2_IOCSTATUS_MASK
;
1051 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
1052 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
1053 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1059 sas_iounit_pg1
->PhyData
[mpt2sas_phy
->phy_id
].PhyFlags
1060 &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE
;
1062 sas_iounit_pg1
->PhyData
[mpt2sas_phy
->phy_id
].PhyFlags
1063 |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE
;
1065 mpt2sas_config_set_sas_iounit_pg1(ioc
, &mpi_reply
, sas_iounit_pg1
, sz
);
1068 kfree(sas_iounit_pg1
);
1073 * _transport_phy_speed - set phy min/max link rates
1074 * @phy: The sas phy object
1075 * @rates: rates defined in sas_phy_linkrates
1077 * Only support sas_host direct attached phys.
1078 * Returns 0 for success, non-zero for failure.
1081 _transport_phy_speed(struct sas_phy
*phy
, struct sas_phy_linkrates
*rates
)
1083 struct MPT2SAS_ADAPTER
*ioc
= phy_to_ioc(phy
);
1084 struct _sas_phy
*mpt2sas_phy
;
1085 Mpi2SasIOUnitPage1_t
*sas_iounit_pg1
= NULL
;
1086 Mpi2SasPhyPage0_t phy_pg0
;
1087 Mpi2ConfigReply_t mpi_reply
;
1093 mpt2sas_phy
= _transport_find_local_phy(ioc
, phy
);
1095 if (!mpt2sas_phy
) /* this phy not on sas_host */
1098 if (!rates
->minimum_linkrate
)
1099 rates
->minimum_linkrate
= phy
->minimum_linkrate
;
1100 else if (rates
->minimum_linkrate
< phy
->minimum_linkrate_hw
)
1101 rates
->minimum_linkrate
= phy
->minimum_linkrate_hw
;
1103 if (!rates
->maximum_linkrate
)
1104 rates
->maximum_linkrate
= phy
->maximum_linkrate
;
1105 else if (rates
->maximum_linkrate
> phy
->maximum_linkrate_hw
)
1106 rates
->maximum_linkrate
= phy
->maximum_linkrate_hw
;
1108 /* sas_iounit page 1 */
1109 sz
= offsetof(Mpi2SasIOUnitPage1_t
, PhyData
) + (ioc
->sas_hba
.num_phys
*
1110 sizeof(Mpi2SasIOUnit1PhyData_t
));
1111 sas_iounit_pg1
= kzalloc(sz
, GFP_KERNEL
);
1112 if (!sas_iounit_pg1
) {
1113 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
1114 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1118 if ((mpt2sas_config_get_sas_iounit_pg1(ioc
, &mpi_reply
,
1119 sas_iounit_pg1
, sz
))) {
1120 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
1121 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1125 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
1126 MPI2_IOCSTATUS_MASK
;
1127 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
1128 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
1129 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1134 for (i
= 0; i
< ioc
->sas_hba
.num_phys
; i
++) {
1135 if (mpt2sas_phy
->phy_id
!= i
) {
1136 sas_iounit_pg1
->PhyData
[i
].MaxMinLinkRate
=
1137 (ioc
->sas_hba
.phy
[i
].phy
->minimum_linkrate
+
1138 (ioc
->sas_hba
.phy
[i
].phy
->maximum_linkrate
<< 4));
1140 sas_iounit_pg1
->PhyData
[i
].MaxMinLinkRate
=
1141 (rates
->minimum_linkrate
+
1142 (rates
->maximum_linkrate
<< 4));
1146 if (mpt2sas_config_set_sas_iounit_pg1(ioc
, &mpi_reply
, sas_iounit_pg1
,
1148 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
1149 ioc
->name
, __FILE__
, __LINE__
, __func__
);
1155 _transport_phy_reset(phy
, 0);
1157 /* read phy page 0, then update the rates in the sas transport phy */
1158 if (!mpt2sas_config_get_phy_pg0(ioc
, &mpi_reply
, &phy_pg0
,
1159 mpt2sas_phy
->phy_id
)) {
1160 phy
->minimum_linkrate
= _transport_convert_phy_link_rate(
1161 phy_pg0
.ProgrammedLinkRate
& MPI2_SAS_PRATE_MIN_RATE_MASK
);
1162 phy
->maximum_linkrate
= _transport_convert_phy_link_rate(
1163 phy_pg0
.ProgrammedLinkRate
>> 4);
1164 phy
->negotiated_linkrate
= _transport_convert_phy_link_rate(
1165 phy_pg0
.NegotiatedLinkRate
&
1166 MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL
);
1170 kfree(sas_iounit_pg1
);
1176 * _transport_smp_handler - transport portal for smp passthru
1177 * @shost: shost object
1178 * @rphy: sas transport rphy object
1181 * This used primarily for smp_utils.
1183 * smp_rep_general /sys/class/bsg/expander-5:0
1186 _transport_smp_handler(struct Scsi_Host
*shost
, struct sas_rphy
*rphy
,
1187 struct request
*req
)
1189 struct MPT2SAS_ADAPTER
*ioc
= shost_priv(shost
);
1190 Mpi2SmpPassthroughRequest_t
*mpi_request
;
1191 Mpi2SmpPassthroughReply_t
*mpi_reply
;
1195 unsigned long timeleft
;
1199 dma_addr_t dma_addr_in
= 0;
1200 dma_addr_t dma_addr_out
= 0;
1201 u16 wait_state_count
;
1202 struct request
*rsp
= req
->next_rq
;
1205 printk(MPT2SAS_ERR_FMT
"%s: the smp response space is "
1206 "missing\n", ioc
->name
, __func__
);
1210 /* do we need to support multiple segments? */
1211 if (req
->bio
->bi_vcnt
> 1 || rsp
->bio
->bi_vcnt
> 1) {
1212 printk(MPT2SAS_ERR_FMT
"%s: multiple segments req %u %u, "
1213 "rsp %u %u\n", ioc
->name
, __func__
, req
->bio
->bi_vcnt
,
1214 blk_rq_bytes(req
), rsp
->bio
->bi_vcnt
, blk_rq_bytes(rsp
));
1218 if (ioc
->shost_recovery
) {
1219 printk(MPT2SAS_INFO_FMT
"%s: host reset in progress!\n",
1220 __func__
, ioc
->name
);
1224 rc
= mutex_lock_interruptible(&ioc
->transport_cmds
.mutex
);
1228 if (ioc
->transport_cmds
.status
!= MPT2_CMD_NOT_USED
) {
1229 printk(MPT2SAS_ERR_FMT
"%s: transport_cmds in use\n", ioc
->name
,
1234 ioc
->transport_cmds
.status
= MPT2_CMD_PENDING
;
1236 wait_state_count
= 0;
1237 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
1238 while (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
1239 if (wait_state_count
++ == 10) {
1240 printk(MPT2SAS_ERR_FMT
1241 "%s: failed due to ioc not operational\n",
1242 ioc
->name
, __func__
);
1247 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
1248 printk(MPT2SAS_INFO_FMT
"%s: waiting for "
1249 "operational state(count=%d)\n", ioc
->name
,
1250 __func__
, wait_state_count
);
1252 if (wait_state_count
)
1253 printk(MPT2SAS_INFO_FMT
"%s: ioc is operational\n",
1254 ioc
->name
, __func__
);
1256 smid
= mpt2sas_base_get_smid(ioc
, ioc
->transport_cb_idx
);
1258 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
1259 ioc
->name
, __func__
);
1265 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
1266 ioc
->transport_cmds
.smid
= smid
;
1268 memset(mpi_request
, 0, sizeof(Mpi2SmpPassthroughRequest_t
));
1269 mpi_request
->Function
= MPI2_FUNCTION_SMP_PASSTHROUGH
;
1270 mpi_request
->PhysicalPort
= 0xFF;
1271 mpi_request
->VF_ID
= 0; /* TODO */
1272 mpi_request
->VP_ID
= 0;
1273 *((u64
*)&mpi_request
->SASAddress
) = (rphy
) ?
1274 cpu_to_le64(rphy
->identify
.sas_address
) :
1275 cpu_to_le64(ioc
->sas_hba
.sas_address
);
1276 mpi_request
->RequestDataLength
= cpu_to_le16(blk_rq_bytes(req
) - 4);
1277 psge
= &mpi_request
->SGL
;
1279 /* WRITE sgel first */
1280 sgl_flags
= (MPI2_SGE_FLAGS_SIMPLE_ELEMENT
|
1281 MPI2_SGE_FLAGS_END_OF_BUFFER
| MPI2_SGE_FLAGS_HOST_TO_IOC
);
1282 sgl_flags
= sgl_flags
<< MPI2_SGE_FLAGS_SHIFT
;
1283 dma_addr_out
= pci_map_single(ioc
->pdev
, bio_data(req
->bio
),
1284 blk_rq_bytes(req
), PCI_DMA_BIDIRECTIONAL
);
1285 if (!dma_addr_out
) {
1286 mpt2sas_base_free_smid(ioc
, smid
);
1290 ioc
->base_add_sg_single(psge
, sgl_flags
| (blk_rq_bytes(req
) - 4),
1294 psge
+= ioc
->sge_size
;
1296 /* READ sgel last */
1297 sgl_flags
= (MPI2_SGE_FLAGS_SIMPLE_ELEMENT
|
1298 MPI2_SGE_FLAGS_LAST_ELEMENT
| MPI2_SGE_FLAGS_END_OF_BUFFER
|
1299 MPI2_SGE_FLAGS_END_OF_LIST
);
1300 sgl_flags
= sgl_flags
<< MPI2_SGE_FLAGS_SHIFT
;
1301 dma_addr_in
= pci_map_single(ioc
->pdev
, bio_data(rsp
->bio
),
1302 blk_rq_bytes(rsp
), PCI_DMA_BIDIRECTIONAL
);
1304 mpt2sas_base_free_smid(ioc
, smid
);
1308 ioc
->base_add_sg_single(psge
, sgl_flags
| (blk_rq_bytes(rsp
) + 4),
1311 dtransportprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s - "
1312 "sending smp request\n", ioc
->name
, __func__
));
1314 mpt2sas_base_put_smid_default(ioc
, smid
);
1315 init_completion(&ioc
->transport_cmds
.done
);
1316 timeleft
= wait_for_completion_timeout(&ioc
->transport_cmds
.done
,
1319 if (!(ioc
->transport_cmds
.status
& MPT2_CMD_COMPLETE
)) {
1320 printk(MPT2SAS_ERR_FMT
"%s : timeout\n",
1321 __func__
, ioc
->name
);
1322 _debug_dump_mf(mpi_request
,
1323 sizeof(Mpi2SmpPassthroughRequest_t
)/4);
1324 if (!(ioc
->transport_cmds
.status
& MPT2_CMD_RESET
))
1326 goto issue_host_reset
;
1329 dtransportprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
"%s - "
1330 "complete\n", ioc
->name
, __func__
));
1332 if (ioc
->transport_cmds
.status
& MPT2_CMD_REPLY_VALID
) {
1334 mpi_reply
= ioc
->transport_cmds
.reply
;
1336 dtransportprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
1337 "%s - reply data transfer size(%d)\n",
1338 ioc
->name
, __func__
,
1339 le16_to_cpu(mpi_reply
->ResponseDataLength
)));
1341 memcpy(req
->sense
, mpi_reply
, sizeof(*mpi_reply
));
1342 req
->sense_len
= sizeof(*mpi_reply
);
1345 le16_to_cpu(mpi_reply
->ResponseDataLength
);
1347 dtransportprintk(ioc
, printk(MPT2SAS_DEBUG_FMT
1348 "%s - no reply\n", ioc
->name
, __func__
));
1354 mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
1361 pci_unmap_single(ioc
->pdev
, dma_addr_out
, blk_rq_bytes(req
),
1362 PCI_DMA_BIDIRECTIONAL
);
1364 pci_unmap_single(ioc
->pdev
, dma_addr_in
, blk_rq_bytes(rsp
),
1365 PCI_DMA_BIDIRECTIONAL
);
1368 ioc
->transport_cmds
.status
= MPT2_CMD_NOT_USED
;
1369 mutex_unlock(&ioc
->transport_cmds
.mutex
);
1373 struct sas_function_template mpt2sas_transport_functions
= {
1374 .get_linkerrors
= _transport_get_linkerrors
,
1375 .get_enclosure_identifier
= _transport_get_enclosure_identifier
,
1376 .get_bay_identifier
= _transport_get_bay_identifier
,
1377 .phy_reset
= _transport_phy_reset
,
1378 .phy_enable
= _transport_phy_enable
,
1379 .set_phy_speed
= _transport_phy_speed
,
1380 .smp_handler
= _transport_smp_handler
,
1383 struct scsi_transport_template
*mpt2sas_transport_template
;