2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2008 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/delay.h>
13 * qla2x00_mailbox_command
14 * Issue mailbox command and waits for completion.
17 * ha = adapter block pointer.
18 * mcp = driver internal mbx struct pointer.
21 * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data.
24 * 0 : QLA_SUCCESS = cmd performed success
25 * 1 : QLA_FUNCTION_FAILED (error encountered)
26 * 6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered)
32 qla2x00_mailbox_command(scsi_qla_host_t
*vha
, mbx_cmd_t
*mcp
)
35 unsigned long flags
= 0;
36 device_reg_t __iomem
*reg
;
41 uint16_t __iomem
*optr
;
44 unsigned long wait_time
;
45 struct qla_hw_data
*ha
= vha
->hw
;
46 scsi_qla_host_t
*base_vha
= pci_get_drvdata(ha
->pdev
);
48 if (ha
->pdev
->error_state
> pci_channel_io_frozen
)
49 return QLA_FUNCTION_TIMEOUT
;
52 io_lock_on
= base_vha
->flags
.init_done
;
55 abort_active
= test_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
57 DEBUG11(printk("%s(%ld): entered.\n", __func__
, base_vha
->host_no
));
60 * Wait for active mailbox commands to finish by waiting at most tov
61 * seconds. This is to serialize actual issuing of mailbox cmds during
64 if (!wait_for_completion_timeout(&ha
->mbx_cmd_comp
, mcp
->tov
* HZ
)) {
65 /* Timeout occurred. Return error. */
66 DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
67 "Exiting.\n", __func__
, base_vha
->host_no
));
68 return QLA_FUNCTION_TIMEOUT
;
71 ha
->flags
.mbox_busy
= 1;
72 /* Save mailbox command for debug */
75 DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
76 base_vha
->host_no
, mcp
->mb
[0]));
78 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
80 /* Load mailbox registers. */
81 if (IS_FWI2_CAPABLE(ha
))
82 optr
= (uint16_t __iomem
*)®
->isp24
.mailbox0
;
84 optr
= (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 0);
90 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
91 if (IS_QLA2200(ha
) && cnt
== 8)
93 (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 8);
95 WRT_REG_WORD(optr
, *iptr
);
102 #if defined(QL_DEBUG_LEVEL_1)
103 printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n",
104 __func__
, base_vha
->host_no
);
105 qla2x00_dump_buffer((uint8_t *)mcp
->mb
, 16);
107 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x10), 16);
109 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x20), 8);
111 printk("%s(%ld): I/O address = %p.\n", __func__
, base_vha
->host_no
,
113 qla2x00_dump_regs(base_vha
);
116 /* Issue set host interrupt command to send cmd out. */
117 ha
->flags
.mbox_int
= 0;
118 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
120 /* Unlock mbx registers and wait for interrupt */
121 DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. "
122 "jiffies=%lx.\n", __func__
, base_vha
->host_no
, jiffies
));
124 /* Wait for mbx cmd completion until timeout */
126 if ((!abort_active
&& io_lock_on
) || IS_NOPOLLING_TYPE(ha
)) {
127 set_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
129 if (IS_FWI2_CAPABLE(ha
))
130 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
132 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
133 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
135 wait_for_completion_timeout(&ha
->mbx_intr_comp
, mcp
->tov
* HZ
);
137 clear_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
140 DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__
,
141 base_vha
->host_no
, command
));
143 if (IS_FWI2_CAPABLE(ha
))
144 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
146 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
147 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
149 wait_time
= jiffies
+ mcp
->tov
* HZ
; /* wait at most tov secs */
150 while (!ha
->flags
.mbox_int
) {
151 if (time_after(jiffies
, wait_time
))
154 /* Check for pending interrupts. */
155 qla2x00_poll(ha
->rsp_q_map
[0]);
157 if (command
!= MBC_LOAD_RISC_RAM_EXTENDED
&&
163 /* Check whether we timed out */
164 if (ha
->flags
.mbox_int
) {
167 DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__
,
168 base_vha
->host_no
, command
));
170 /* Got interrupt. Clear the flag. */
171 ha
->flags
.mbox_int
= 0;
172 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
174 if (ha
->mailbox_out
[0] != MBS_COMMAND_COMPLETE
)
175 rval
= QLA_FUNCTION_FAILED
;
177 /* Load return mailbox registers. */
179 iptr
= (uint16_t *)&ha
->mailbox_out
[0];
181 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
191 #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \
192 defined(QL_DEBUG_LEVEL_11)
196 if (IS_FWI2_CAPABLE(ha
)) {
197 mb0
= RD_REG_WORD(®
->isp24
.mailbox0
);
198 ictrl
= RD_REG_DWORD(®
->isp24
.ictrl
);
200 mb0
= RD_MAILBOX_REG(ha
, ®
->isp
, 0);
201 ictrl
= RD_REG_WORD(®
->isp
.ictrl
);
203 printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n",
204 __func__
, base_vha
->host_no
, command
);
205 printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__
,
206 base_vha
->host_no
, ictrl
, jiffies
);
207 printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__
,
208 base_vha
->host_no
, mb0
);
209 qla2x00_dump_regs(base_vha
);
212 rval
= QLA_FUNCTION_TIMEOUT
;
215 ha
->flags
.mbox_busy
= 0;
220 if ((abort_active
|| !io_lock_on
) && !IS_NOPOLLING_TYPE(ha
)) {
221 DEBUG11(printk("%s(%ld): checking for additional resp "
222 "interrupt.\n", __func__
, base_vha
->host_no
));
224 /* polling mode for non isp_abort commands. */
225 qla2x00_poll(ha
->rsp_q_map
[0]);
228 if (rval
== QLA_FUNCTION_TIMEOUT
&&
229 mcp
->mb
[0] != MBC_GEN_SYSTEM_ERROR
) {
230 if (!io_lock_on
|| (mcp
->flags
& IOCTL_CMD
)) {
231 /* not in dpc. schedule it for dpc to take over. */
232 DEBUG(printk("%s(%ld): timeout schedule "
233 "isp_abort_needed.\n", __func__
,
235 DEBUG2_3_11(printk("%s(%ld): timeout schedule "
236 "isp_abort_needed.\n", __func__
,
238 qla_printk(KERN_WARNING
, ha
,
239 "Mailbox command timeout occurred. Scheduling ISP "
241 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
242 qla2xxx_wake_dpc(vha
);
243 } else if (!abort_active
) {
244 /* call abort directly since we are in the DPC thread */
245 DEBUG(printk("%s(%ld): timeout calling abort_isp\n",
246 __func__
, base_vha
->host_no
));
247 DEBUG2_3_11(printk("%s(%ld): timeout calling "
248 "abort_isp\n", __func__
, base_vha
->host_no
));
249 qla_printk(KERN_WARNING
, ha
,
250 "Mailbox command timeout occurred. Issuing ISP "
253 set_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
254 clear_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
255 if (qla2x00_abort_isp(base_vha
)) {
256 /* Failed. retry later. */
257 set_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
);
259 clear_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
);
260 DEBUG(printk("%s(%ld): finished abort_isp\n", __func__
,
262 DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n",
263 __func__
, base_vha
->host_no
));
267 /* Allow next mbx cmd to come in. */
268 complete(&ha
->mbx_cmd_comp
);
271 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
272 "mbx2=%x, cmd=%x ****\n", __func__
, base_vha
->host_no
,
273 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2], command
));
275 DEBUG11(printk("%s(%ld): done.\n", __func__
,
283 qla2x00_load_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t risc_addr
,
284 uint32_t risc_code_size
)
287 struct qla_hw_data
*ha
= vha
->hw
;
289 mbx_cmd_t
*mcp
= &mc
;
291 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
293 if (MSW(risc_addr
) || IS_FWI2_CAPABLE(ha
)) {
294 mcp
->mb
[0] = MBC_LOAD_RISC_RAM_EXTENDED
;
295 mcp
->mb
[8] = MSW(risc_addr
);
296 mcp
->out_mb
= MBX_8
|MBX_0
;
298 mcp
->mb
[0] = MBC_LOAD_RISC_RAM
;
301 mcp
->mb
[1] = LSW(risc_addr
);
302 mcp
->mb
[2] = MSW(req_dma
);
303 mcp
->mb
[3] = LSW(req_dma
);
304 mcp
->mb
[6] = MSW(MSD(req_dma
));
305 mcp
->mb
[7] = LSW(MSD(req_dma
));
306 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
307 if (IS_FWI2_CAPABLE(ha
)) {
308 mcp
->mb
[4] = MSW(risc_code_size
);
309 mcp
->mb
[5] = LSW(risc_code_size
);
310 mcp
->out_mb
|= MBX_5
|MBX_4
;
312 mcp
->mb
[4] = LSW(risc_code_size
);
313 mcp
->out_mb
|= MBX_4
;
317 mcp
->tov
= MBX_TOV_SECONDS
;
319 rval
= qla2x00_mailbox_command(vha
, mcp
);
321 if (rval
!= QLA_SUCCESS
) {
322 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
323 vha
->host_no
, rval
, mcp
->mb
[0]));
325 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
333 * Start adapter firmware.
336 * ha = adapter block pointer.
337 * TARGET_QUEUE_LOCK must be released.
338 * ADAPTER_STATE_LOCK must be released.
341 * qla2x00 local function return status code.
347 qla2x00_execute_fw(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
350 struct qla_hw_data
*ha
= vha
->hw
;
352 mbx_cmd_t
*mcp
= &mc
;
354 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
356 mcp
->mb
[0] = MBC_EXECUTE_FIRMWARE
;
359 if (IS_FWI2_CAPABLE(ha
)) {
360 mcp
->mb
[1] = MSW(risc_addr
);
361 mcp
->mb
[2] = LSW(risc_addr
);
364 mcp
->out_mb
|= MBX_4
|MBX_3
|MBX_2
|MBX_1
;
367 mcp
->mb
[1] = LSW(risc_addr
);
368 mcp
->out_mb
|= MBX_1
;
369 if (IS_QLA2322(ha
) || IS_QLA6322(ha
)) {
371 mcp
->out_mb
|= MBX_2
;
375 mcp
->tov
= MBX_TOV_SECONDS
;
377 rval
= qla2x00_mailbox_command(vha
, mcp
);
379 if (rval
!= QLA_SUCCESS
) {
380 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
381 vha
->host_no
, rval
, mcp
->mb
[0]));
383 if (IS_FWI2_CAPABLE(ha
)) {
384 DEBUG11(printk("%s(%ld): done exchanges=%x.\n",
385 __func__
, vha
->host_no
, mcp
->mb
[1]));
387 DEBUG11(printk("%s(%ld): done.\n", __func__
,
396 * qla2x00_get_fw_version
397 * Get firmware version.
400 * ha: adapter state pointer.
401 * major: pointer for major number.
402 * minor: pointer for minor number.
403 * subminor: pointer for subminor number.
406 * qla2x00 local function return status code.
412 qla2x00_get_fw_version(scsi_qla_host_t
*vha
, uint16_t *major
, uint16_t *minor
,
413 uint16_t *subminor
, uint16_t *attributes
, uint32_t *memory
, uint8_t *mpi
,
414 uint32_t *mpi_caps
, uint8_t *phy
)
418 mbx_cmd_t
*mcp
= &mc
;
420 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
422 mcp
->mb
[0] = MBC_GET_FIRMWARE_VERSION
;
424 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
425 if (IS_QLA81XX(vha
->hw
))
426 mcp
->in_mb
|= MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
;
428 mcp
->tov
= MBX_TOV_SECONDS
;
429 rval
= qla2x00_mailbox_command(vha
, mcp
);
431 /* Return mailbox data. */
434 *subminor
= mcp
->mb
[3];
435 *attributes
= mcp
->mb
[6];
436 if (IS_QLA2100(vha
->hw
) || IS_QLA2200(vha
->hw
))
437 *memory
= 0x1FFFF; /* Defaults to 128KB. */
439 *memory
= (mcp
->mb
[5] << 16) | mcp
->mb
[4];
440 if (IS_QLA81XX(vha
->hw
)) {
441 mpi
[0] = mcp
->mb
[10] & 0xff;
442 mpi
[1] = mcp
->mb
[11] >> 8;
443 mpi
[2] = mcp
->mb
[11] & 0xff;
444 *mpi_caps
= (mcp
->mb
[12] << 16) | mcp
->mb
[13];
445 phy
[0] = mcp
->mb
[8] & 0xff;
446 phy
[1] = mcp
->mb
[9] >> 8;
447 phy
[2] = mcp
->mb
[9] & 0xff;
450 if (rval
!= QLA_SUCCESS
) {
452 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
453 vha
->host_no
, rval
));
456 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
461 * qla2x00_get_fw_options
462 * Set firmware options.
465 * ha = adapter block pointer.
466 * fwopt = pointer for firmware options.
469 * qla2x00 local function return status code.
475 qla2x00_get_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
479 mbx_cmd_t
*mcp
= &mc
;
481 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
483 mcp
->mb
[0] = MBC_GET_FIRMWARE_OPTION
;
485 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
486 mcp
->tov
= MBX_TOV_SECONDS
;
488 rval
= qla2x00_mailbox_command(vha
, mcp
);
490 if (rval
!= QLA_SUCCESS
) {
492 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
493 vha
->host_no
, rval
));
495 fwopts
[0] = mcp
->mb
[0];
496 fwopts
[1] = mcp
->mb
[1];
497 fwopts
[2] = mcp
->mb
[2];
498 fwopts
[3] = mcp
->mb
[3];
500 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
508 * qla2x00_set_fw_options
509 * Set firmware options.
512 * ha = adapter block pointer.
513 * fwopt = pointer for firmware options.
516 * qla2x00 local function return status code.
522 qla2x00_set_fw_options(scsi_qla_host_t
*vha
, uint16_t *fwopts
)
526 mbx_cmd_t
*mcp
= &mc
;
528 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
530 mcp
->mb
[0] = MBC_SET_FIRMWARE_OPTION
;
531 mcp
->mb
[1] = fwopts
[1];
532 mcp
->mb
[2] = fwopts
[2];
533 mcp
->mb
[3] = fwopts
[3];
534 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
536 if (IS_FWI2_CAPABLE(vha
->hw
)) {
539 mcp
->mb
[10] = fwopts
[10];
540 mcp
->mb
[11] = fwopts
[11];
541 mcp
->mb
[12] = 0; /* Undocumented, but used */
542 mcp
->out_mb
|= MBX_12
|MBX_11
|MBX_10
;
544 mcp
->tov
= MBX_TOV_SECONDS
;
546 rval
= qla2x00_mailbox_command(vha
, mcp
);
548 fwopts
[0] = mcp
->mb
[0];
550 if (rval
!= QLA_SUCCESS
) {
552 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__
,
553 vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
556 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
563 * qla2x00_mbx_reg_test
564 * Mailbox register wrap test.
567 * ha = adapter block pointer.
568 * TARGET_QUEUE_LOCK must be released.
569 * ADAPTER_STATE_LOCK must be released.
572 * qla2x00 local function return status code.
578 qla2x00_mbx_reg_test(scsi_qla_host_t
*vha
)
582 mbx_cmd_t
*mcp
= &mc
;
584 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", vha
->host_no
));
586 mcp
->mb
[0] = MBC_MAILBOX_REGISTER_TEST
;
594 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
595 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
596 mcp
->tov
= MBX_TOV_SECONDS
;
598 rval
= qla2x00_mailbox_command(vha
, mcp
);
600 if (rval
== QLA_SUCCESS
) {
601 if (mcp
->mb
[1] != 0xAAAA || mcp
->mb
[2] != 0x5555 ||
602 mcp
->mb
[3] != 0xAA55 || mcp
->mb
[4] != 0x55AA)
603 rval
= QLA_FUNCTION_FAILED
;
604 if (mcp
->mb
[5] != 0xA5A5 || mcp
->mb
[6] != 0x5A5A ||
605 mcp
->mb
[7] != 0x2525)
606 rval
= QLA_FUNCTION_FAILED
;
609 if (rval
!= QLA_SUCCESS
) {
611 DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n",
612 vha
->host_no
, rval
));
615 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n",
623 * qla2x00_verify_checksum
624 * Verify firmware checksum.
627 * ha = adapter block pointer.
628 * TARGET_QUEUE_LOCK must be released.
629 * ADAPTER_STATE_LOCK must be released.
632 * qla2x00 local function return status code.
638 qla2x00_verify_checksum(scsi_qla_host_t
*vha
, uint32_t risc_addr
)
642 mbx_cmd_t
*mcp
= &mc
;
644 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
646 mcp
->mb
[0] = MBC_VERIFY_CHECKSUM
;
649 if (IS_FWI2_CAPABLE(vha
->hw
)) {
650 mcp
->mb
[1] = MSW(risc_addr
);
651 mcp
->mb
[2] = LSW(risc_addr
);
652 mcp
->out_mb
|= MBX_2
|MBX_1
;
653 mcp
->in_mb
|= MBX_2
|MBX_1
;
655 mcp
->mb
[1] = LSW(risc_addr
);
656 mcp
->out_mb
|= MBX_1
;
660 mcp
->tov
= MBX_TOV_SECONDS
;
662 rval
= qla2x00_mailbox_command(vha
, mcp
);
664 if (rval
!= QLA_SUCCESS
) {
665 DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__
,
666 vha
->host_no
, rval
, IS_FWI2_CAPABLE(vha
->hw
) ?
667 (mcp
->mb
[2] << 16) | mcp
->mb
[1]: mcp
->mb
[1]));
669 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
677 * Issue IOCB using mailbox command
680 * ha = adapter state pointer.
681 * buffer = buffer pointer.
682 * phys_addr = physical address of buffer.
683 * size = size of buffer.
684 * TARGET_QUEUE_LOCK must be released.
685 * ADAPTER_STATE_LOCK must be released.
688 * qla2x00 local function return status code.
694 qla2x00_issue_iocb_timeout(scsi_qla_host_t
*vha
, void *buffer
,
695 dma_addr_t phys_addr
, size_t size
, uint32_t tov
)
699 mbx_cmd_t
*mcp
= &mc
;
701 mcp
->mb
[0] = MBC_IOCB_COMMAND_A64
;
703 mcp
->mb
[2] = MSW(phys_addr
);
704 mcp
->mb
[3] = LSW(phys_addr
);
705 mcp
->mb
[6] = MSW(MSD(phys_addr
));
706 mcp
->mb
[7] = LSW(MSD(phys_addr
));
707 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
708 mcp
->in_mb
= MBX_2
|MBX_0
;
711 rval
= qla2x00_mailbox_command(vha
, mcp
);
713 if (rval
!= QLA_SUCCESS
) {
715 DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
716 vha
->host_no
, rval
));
718 sts_entry_t
*sts_entry
= (sts_entry_t
*) buffer
;
720 /* Mask reserved bits. */
721 sts_entry
->entry_status
&=
722 IS_FWI2_CAPABLE(vha
->hw
) ? RF_MASK_24XX
: RF_MASK
;
729 qla2x00_issue_iocb(scsi_qla_host_t
*vha
, void *buffer
, dma_addr_t phys_addr
,
732 return qla2x00_issue_iocb_timeout(vha
, buffer
, phys_addr
, size
,
737 * qla2x00_abort_command
738 * Abort command aborts a specified IOCB.
741 * ha = adapter block pointer.
742 * sp = SB structure pointer.
745 * qla2x00 local function return status code.
751 qla2x00_abort_command(scsi_qla_host_t
*vha
, srb_t
*sp
, struct req_que
*req
)
753 unsigned long flags
= 0;
758 mbx_cmd_t
*mcp
= &mc
;
759 struct qla_hw_data
*ha
= vha
->hw
;
761 DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha
->host_no
));
765 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
766 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
767 if (req
->outstanding_cmds
[handle
] == sp
)
770 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
772 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
773 /* command not found */
774 return QLA_FUNCTION_FAILED
;
777 mcp
->mb
[0] = MBC_ABORT_COMMAND
;
778 if (HAS_EXTENDED_IDS(ha
))
779 mcp
->mb
[1] = fcport
->loop_id
;
781 mcp
->mb
[1] = fcport
->loop_id
<< 8;
782 mcp
->mb
[2] = (uint16_t)handle
;
783 mcp
->mb
[3] = (uint16_t)(handle
>> 16);
784 mcp
->mb
[6] = (uint16_t)sp
->cmd
->device
->lun
;
785 mcp
->out_mb
= MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
787 mcp
->tov
= MBX_TOV_SECONDS
;
789 rval
= qla2x00_mailbox_command(vha
, mcp
);
791 if (rval
!= QLA_SUCCESS
) {
792 DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n",
793 vha
->host_no
, rval
));
795 DEBUG11(printk("qla2x00_abort_command(%ld): done.\n",
803 qla2x00_abort_target(struct fc_port
*fcport
, unsigned int l
)
807 mbx_cmd_t
*mcp
= &mc
;
808 scsi_qla_host_t
*vha
;
812 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
816 req
= vha
->hw
->req_q_map
[0];
817 rsp
= vha
->hw
->rsp_q_map
[0];
818 mcp
->mb
[0] = MBC_ABORT_TARGET
;
819 mcp
->out_mb
= MBX_9
|MBX_2
|MBX_1
|MBX_0
;
820 if (HAS_EXTENDED_IDS(vha
->hw
)) {
821 mcp
->mb
[1] = fcport
->loop_id
;
823 mcp
->out_mb
|= MBX_10
;
825 mcp
->mb
[1] = fcport
->loop_id
<< 8;
827 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
828 mcp
->mb
[9] = vha
->vp_idx
;
831 mcp
->tov
= MBX_TOV_SECONDS
;
833 rval
= qla2x00_mailbox_command(vha
, mcp
);
834 if (rval
!= QLA_SUCCESS
) {
835 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
836 vha
->host_no
, rval
));
839 /* Issue marker IOCB. */
840 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, 0,
842 if (rval2
!= QLA_SUCCESS
) {
843 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
844 "(%x).\n", __func__
, vha
->host_no
, rval2
));
846 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
853 qla2x00_lun_reset(struct fc_port
*fcport
, unsigned int l
)
857 mbx_cmd_t
*mcp
= &mc
;
858 scsi_qla_host_t
*vha
;
862 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
865 req
= vha
->hw
->req_q_map
[0];
866 rsp
= vha
->hw
->rsp_q_map
[0];
867 mcp
->mb
[0] = MBC_LUN_RESET
;
868 mcp
->out_mb
= MBX_9
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
869 if (HAS_EXTENDED_IDS(vha
->hw
))
870 mcp
->mb
[1] = fcport
->loop_id
;
872 mcp
->mb
[1] = fcport
->loop_id
<< 8;
875 mcp
->mb
[9] = vha
->vp_idx
;
878 mcp
->tov
= MBX_TOV_SECONDS
;
880 rval
= qla2x00_mailbox_command(vha
, mcp
);
881 if (rval
!= QLA_SUCCESS
) {
882 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
883 vha
->host_no
, rval
));
886 /* Issue marker IOCB. */
887 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
889 if (rval2
!= QLA_SUCCESS
) {
890 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
891 "(%x).\n", __func__
, vha
->host_no
, rval2
));
893 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
900 * qla2x00_get_adapter_id
901 * Get adapter ID and topology.
904 * ha = adapter block pointer.
905 * id = pointer for loop ID.
906 * al_pa = pointer for AL_PA.
907 * area = pointer for area.
908 * domain = pointer for domain.
909 * top = pointer for topology.
910 * TARGET_QUEUE_LOCK must be released.
911 * ADAPTER_STATE_LOCK must be released.
914 * qla2x00 local function return status code.
920 qla2x00_get_adapter_id(scsi_qla_host_t
*vha
, uint16_t *id
, uint8_t *al_pa
,
921 uint8_t *area
, uint8_t *domain
, uint16_t *top
, uint16_t *sw_cap
)
925 mbx_cmd_t
*mcp
= &mc
;
927 DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n",
930 mcp
->mb
[0] = MBC_GET_ADAPTER_LOOP_ID
;
931 mcp
->mb
[9] = vha
->vp_idx
;
932 mcp
->out_mb
= MBX_9
|MBX_0
;
933 mcp
->in_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
934 mcp
->tov
= MBX_TOV_SECONDS
;
936 rval
= qla2x00_mailbox_command(vha
, mcp
);
937 if (mcp
->mb
[0] == MBS_COMMAND_ERROR
)
938 rval
= QLA_COMMAND_ERROR
;
939 else if (mcp
->mb
[0] == MBS_INVALID_COMMAND
)
940 rval
= QLA_INVALID_COMMAND
;
944 *al_pa
= LSB(mcp
->mb
[2]);
945 *area
= MSB(mcp
->mb
[2]);
946 *domain
= LSB(mcp
->mb
[3]);
948 *sw_cap
= mcp
->mb
[7];
950 if (rval
!= QLA_SUCCESS
) {
952 DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
953 vha
->host_no
, rval
));
956 DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
964 * qla2x00_get_retry_cnt
965 * Get current firmware login retry count and delay.
968 * ha = adapter block pointer.
969 * retry_cnt = pointer to login retry count.
970 * tov = pointer to login timeout value.
973 * qla2x00 local function return status code.
979 qla2x00_get_retry_cnt(scsi_qla_host_t
*vha
, uint8_t *retry_cnt
, uint8_t *tov
,
985 mbx_cmd_t
*mcp
= &mc
;
987 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n",
990 mcp
->mb
[0] = MBC_GET_RETRY_COUNT
;
992 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
993 mcp
->tov
= MBX_TOV_SECONDS
;
995 rval
= qla2x00_mailbox_command(vha
, mcp
);
997 if (rval
!= QLA_SUCCESS
) {
999 DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n",
1000 vha
->host_no
, mcp
->mb
[0]));
1002 /* Convert returned data and check our values. */
1003 *r_a_tov
= mcp
->mb
[3] / 2;
1004 ratov
= (mcp
->mb
[3]/2) / 10; /* mb[3] value is in 100ms */
1005 if (mcp
->mb
[1] * ratov
> (*retry_cnt
) * (*tov
)) {
1006 /* Update to the larger values */
1007 *retry_cnt
= (uint8_t)mcp
->mb
[1];
1011 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d "
1012 "ratov=%d.\n", vha
->host_no
, mcp
->mb
[3], ratov
));
1019 * qla2x00_init_firmware
1020 * Initialize adapter firmware.
1023 * ha = adapter block pointer.
1024 * dptr = Initialization control block pointer.
1025 * size = size of initialization control block.
1026 * TARGET_QUEUE_LOCK must be released.
1027 * ADAPTER_STATE_LOCK must be released.
1030 * qla2x00 local function return status code.
1036 qla2x00_init_firmware(scsi_qla_host_t
*vha
, uint16_t size
)
1040 mbx_cmd_t
*mcp
= &mc
;
1041 struct qla_hw_data
*ha
= vha
->hw
;
1043 DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
1046 if (ha
->flags
.npiv_supported
)
1047 mcp
->mb
[0] = MBC_MID_INITIALIZE_FIRMWARE
;
1049 mcp
->mb
[0] = MBC_INITIALIZE_FIRMWARE
;
1052 mcp
->mb
[2] = MSW(ha
->init_cb_dma
);
1053 mcp
->mb
[3] = LSW(ha
->init_cb_dma
);
1054 mcp
->mb
[6] = MSW(MSD(ha
->init_cb_dma
));
1055 mcp
->mb
[7] = LSW(MSD(ha
->init_cb_dma
));
1056 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1057 if (IS_QLA81XX(ha
) && ha
->ex_init_cb
->ex_version
) {
1059 mcp
->mb
[10] = MSW(ha
->ex_init_cb_dma
);
1060 mcp
->mb
[11] = LSW(ha
->ex_init_cb_dma
);
1061 mcp
->mb
[12] = MSW(MSD(ha
->ex_init_cb_dma
));
1062 mcp
->mb
[13] = LSW(MSD(ha
->ex_init_cb_dma
));
1063 mcp
->mb
[14] = sizeof(*ha
->ex_init_cb
);
1064 mcp
->out_mb
|= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
;
1067 mcp
->buf_size
= size
;
1068 mcp
->flags
= MBX_DMA_OUT
;
1069 mcp
->tov
= MBX_TOV_SECONDS
;
1070 rval
= qla2x00_mailbox_command(vha
, mcp
);
1072 if (rval
!= QLA_SUCCESS
) {
1074 DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x "
1076 vha
->host_no
, rval
, mcp
->mb
[0]));
1079 DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n",
1087 * qla2x00_get_port_database
1088 * Issue normal/enhanced get port database mailbox command
1089 * and copy device name as necessary.
1092 * ha = adapter state pointer.
1093 * dev = structure pointer.
1094 * opt = enhanced cmd option byte.
1097 * qla2x00 local function return status code.
1103 qla2x00_get_port_database(scsi_qla_host_t
*vha
, fc_port_t
*fcport
, uint8_t opt
)
1107 mbx_cmd_t
*mcp
= &mc
;
1108 port_database_t
*pd
;
1109 struct port_database_24xx
*pd24
;
1111 struct qla_hw_data
*ha
= vha
->hw
;
1113 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1116 pd
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pd_dma
);
1118 DEBUG2_3(printk("%s(%ld): failed to allocate Port Database "
1119 "structure.\n", __func__
, vha
->host_no
));
1120 return QLA_MEMORY_ALLOC_FAILED
;
1122 memset(pd
, 0, max(PORT_DATABASE_SIZE
, PORT_DATABASE_24XX_SIZE
));
1124 mcp
->mb
[0] = MBC_GET_PORT_DATABASE
;
1125 if (opt
!= 0 && !IS_FWI2_CAPABLE(ha
))
1126 mcp
->mb
[0] = MBC_ENHANCED_GET_PORT_DATABASE
;
1127 mcp
->mb
[2] = MSW(pd_dma
);
1128 mcp
->mb
[3] = LSW(pd_dma
);
1129 mcp
->mb
[6] = MSW(MSD(pd_dma
));
1130 mcp
->mb
[7] = LSW(MSD(pd_dma
));
1131 mcp
->mb
[9] = vha
->vp_idx
;
1132 mcp
->out_mb
= MBX_9
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1134 if (IS_FWI2_CAPABLE(ha
)) {
1135 mcp
->mb
[1] = fcport
->loop_id
;
1137 mcp
->out_mb
|= MBX_10
|MBX_1
;
1138 mcp
->in_mb
|= MBX_1
;
1139 } else if (HAS_EXTENDED_IDS(ha
)) {
1140 mcp
->mb
[1] = fcport
->loop_id
;
1142 mcp
->out_mb
|= MBX_10
|MBX_1
;
1144 mcp
->mb
[1] = fcport
->loop_id
<< 8 | opt
;
1145 mcp
->out_mb
|= MBX_1
;
1147 mcp
->buf_size
= IS_FWI2_CAPABLE(ha
) ?
1148 PORT_DATABASE_24XX_SIZE
: PORT_DATABASE_SIZE
;
1149 mcp
->flags
= MBX_DMA_IN
;
1150 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1151 rval
= qla2x00_mailbox_command(vha
, mcp
);
1152 if (rval
!= QLA_SUCCESS
)
1155 if (IS_FWI2_CAPABLE(ha
)) {
1156 pd24
= (struct port_database_24xx
*) pd
;
1158 /* Check for logged in state. */
1159 if (pd24
->current_login_state
!= PDS_PRLI_COMPLETE
&&
1160 pd24
->last_login_state
!= PDS_PRLI_COMPLETE
) {
1161 DEBUG2(printk("%s(%ld): Unable to verify "
1162 "login-state (%x/%x) for loop_id %x\n",
1163 __func__
, vha
->host_no
,
1164 pd24
->current_login_state
,
1165 pd24
->last_login_state
, fcport
->loop_id
));
1166 rval
= QLA_FUNCTION_FAILED
;
1170 /* Names are little-endian. */
1171 memcpy(fcport
->node_name
, pd24
->node_name
, WWN_SIZE
);
1172 memcpy(fcport
->port_name
, pd24
->port_name
, WWN_SIZE
);
1174 /* Get port_id of device. */
1175 fcport
->d_id
.b
.domain
= pd24
->port_id
[0];
1176 fcport
->d_id
.b
.area
= pd24
->port_id
[1];
1177 fcport
->d_id
.b
.al_pa
= pd24
->port_id
[2];
1178 fcport
->d_id
.b
.rsvd_1
= 0;
1180 /* If not target must be initiator or unknown type. */
1181 if ((pd24
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1182 fcport
->port_type
= FCT_INITIATOR
;
1184 fcport
->port_type
= FCT_TARGET
;
1186 /* Check for logged in state. */
1187 if (pd
->master_state
!= PD_STATE_PORT_LOGGED_IN
&&
1188 pd
->slave_state
!= PD_STATE_PORT_LOGGED_IN
) {
1189 rval
= QLA_FUNCTION_FAILED
;
1193 /* Names are little-endian. */
1194 memcpy(fcport
->node_name
, pd
->node_name
, WWN_SIZE
);
1195 memcpy(fcport
->port_name
, pd
->port_name
, WWN_SIZE
);
1197 /* Get port_id of device. */
1198 fcport
->d_id
.b
.domain
= pd
->port_id
[0];
1199 fcport
->d_id
.b
.area
= pd
->port_id
[3];
1200 fcport
->d_id
.b
.al_pa
= pd
->port_id
[2];
1201 fcport
->d_id
.b
.rsvd_1
= 0;
1203 /* If not target must be initiator or unknown type. */
1204 if ((pd
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1205 fcport
->port_type
= FCT_INITIATOR
;
1207 fcport
->port_type
= FCT_TARGET
;
1209 /* Passback COS information. */
1210 fcport
->supported_classes
= (pd
->options
& BIT_4
) ?
1211 FC_COS_CLASS2
: FC_COS_CLASS3
;
1215 dma_pool_free(ha
->s_dma_pool
, pd
, pd_dma
);
1217 if (rval
!= QLA_SUCCESS
) {
1218 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
1219 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1221 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1228 * qla2x00_get_firmware_state
1229 * Get adapter firmware state.
1232 * ha = adapter block pointer.
1233 * dptr = pointer for firmware state.
1234 * TARGET_QUEUE_LOCK must be released.
1235 * ADAPTER_STATE_LOCK must be released.
1238 * qla2x00 local function return status code.
1244 qla2x00_get_firmware_state(scsi_qla_host_t
*vha
, uint16_t *states
)
1248 mbx_cmd_t
*mcp
= &mc
;
1250 DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n",
1253 mcp
->mb
[0] = MBC_GET_FIRMWARE_STATE
;
1254 mcp
->out_mb
= MBX_0
;
1255 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1256 mcp
->tov
= MBX_TOV_SECONDS
;
1258 rval
= qla2x00_mailbox_command(vha
, mcp
);
1260 /* Return firmware states. */
1261 states
[0] = mcp
->mb
[1];
1262 states
[1] = mcp
->mb
[2];
1263 states
[2] = mcp
->mb
[3];
1265 if (rval
!= QLA_SUCCESS
) {
1267 DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): "
1268 "failed=%x.\n", vha
->host_no
, rval
));
1271 DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n",
1279 * qla2x00_get_port_name
1280 * Issue get port name mailbox command.
1281 * Returned name is in big endian format.
1284 * ha = adapter block pointer.
1285 * loop_id = loop ID of device.
1286 * name = pointer for name.
1287 * TARGET_QUEUE_LOCK must be released.
1288 * ADAPTER_STATE_LOCK must be released.
1291 * qla2x00 local function return status code.
1297 qla2x00_get_port_name(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t *name
,
1302 mbx_cmd_t
*mcp
= &mc
;
1304 DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n",
1307 mcp
->mb
[0] = MBC_GET_PORT_NAME
;
1308 mcp
->mb
[9] = vha
->vp_idx
;
1309 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
1310 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1311 mcp
->mb
[1] = loop_id
;
1313 mcp
->out_mb
|= MBX_10
;
1315 mcp
->mb
[1] = loop_id
<< 8 | opt
;
1318 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1319 mcp
->tov
= MBX_TOV_SECONDS
;
1321 rval
= qla2x00_mailbox_command(vha
, mcp
);
1323 if (rval
!= QLA_SUCCESS
) {
1325 DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n",
1326 vha
->host_no
, rval
));
1329 /* This function returns name in big endian. */
1330 name
[0] = MSB(mcp
->mb
[2]);
1331 name
[1] = LSB(mcp
->mb
[2]);
1332 name
[2] = MSB(mcp
->mb
[3]);
1333 name
[3] = LSB(mcp
->mb
[3]);
1334 name
[4] = MSB(mcp
->mb
[6]);
1335 name
[5] = LSB(mcp
->mb
[6]);
1336 name
[6] = MSB(mcp
->mb
[7]);
1337 name
[7] = LSB(mcp
->mb
[7]);
1340 DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
1349 * Issue LIP reset mailbox command.
1352 * ha = adapter block pointer.
1353 * TARGET_QUEUE_LOCK must be released.
1354 * ADAPTER_STATE_LOCK must be released.
1357 * qla2x00 local function return status code.
1363 qla2x00_lip_reset(scsi_qla_host_t
*vha
)
1367 mbx_cmd_t
*mcp
= &mc
;
1369 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1371 if (IS_QLA81XX(vha
->hw
)) {
1372 /* Logout across all FCFs. */
1373 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1376 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1377 } else if (IS_FWI2_CAPABLE(vha
->hw
)) {
1378 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1381 mcp
->mb
[3] = vha
->hw
->loop_reset_delay
;
1382 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1384 mcp
->mb
[0] = MBC_LIP_RESET
;
1385 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1386 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1387 mcp
->mb
[1] = 0x00ff;
1389 mcp
->out_mb
|= MBX_10
;
1391 mcp
->mb
[1] = 0xff00;
1393 mcp
->mb
[2] = vha
->hw
->loop_reset_delay
;
1397 mcp
->tov
= MBX_TOV_SECONDS
;
1399 rval
= qla2x00_mailbox_command(vha
, mcp
);
1401 if (rval
!= QLA_SUCCESS
) {
1403 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n",
1404 __func__
, vha
->host_no
, rval
));
1407 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1418 * ha = adapter block pointer.
1419 * sns = pointer for command.
1420 * cmd_size = command size.
1421 * buf_size = response/command size.
1422 * TARGET_QUEUE_LOCK must be released.
1423 * ADAPTER_STATE_LOCK must be released.
1426 * qla2x00 local function return status code.
1432 qla2x00_send_sns(scsi_qla_host_t
*vha
, dma_addr_t sns_phys_address
,
1433 uint16_t cmd_size
, size_t buf_size
)
1437 mbx_cmd_t
*mcp
= &mc
;
1439 DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n",
1442 DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total "
1443 "tov=%d.\n", vha
->hw
->retry_count
, vha
->hw
->login_timeout
,
1446 mcp
->mb
[0] = MBC_SEND_SNS_COMMAND
;
1447 mcp
->mb
[1] = cmd_size
;
1448 mcp
->mb
[2] = MSW(sns_phys_address
);
1449 mcp
->mb
[3] = LSW(sns_phys_address
);
1450 mcp
->mb
[6] = MSW(MSD(sns_phys_address
));
1451 mcp
->mb
[7] = LSW(MSD(sns_phys_address
));
1452 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1453 mcp
->in_mb
= MBX_0
|MBX_1
;
1454 mcp
->buf_size
= buf_size
;
1455 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
;
1456 mcp
->tov
= (vha
->hw
->login_timeout
* 2) + (vha
->hw
->login_timeout
/ 2);
1457 rval
= qla2x00_mailbox_command(vha
, mcp
);
1459 if (rval
!= QLA_SUCCESS
) {
1461 DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1462 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1463 DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1464 "mb[1]=%x.\n", vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1467 DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", vha
->host_no
));
1474 qla24xx_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1475 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1479 struct logio_entry_24xx
*lg
;
1482 struct qla_hw_data
*ha
= vha
->hw
;
1484 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1486 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1488 DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
1489 __func__
, vha
->host_no
));
1490 return QLA_MEMORY_ALLOC_FAILED
;
1492 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1494 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1495 lg
->entry_count
= 1;
1496 lg
->nport_handle
= cpu_to_le16(loop_id
);
1497 lg
->control_flags
= __constant_cpu_to_le16(LCF_COMMAND_PLOGI
);
1499 lg
->control_flags
|= __constant_cpu_to_le16(LCF_COND_PLOGI
);
1501 lg
->control_flags
|= __constant_cpu_to_le16(LCF_SKIP_PRLI
);
1502 lg
->port_id
[0] = al_pa
;
1503 lg
->port_id
[1] = area
;
1504 lg
->port_id
[2] = domain
;
1505 lg
->vp_index
= vha
->vp_idx
;
1506 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1507 if (rval
!= QLA_SUCCESS
) {
1508 DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
1509 "(%x).\n", __func__
, vha
->host_no
, rval
));
1510 } else if (lg
->entry_status
!= 0) {
1511 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1512 "-- error status (%x).\n", __func__
, vha
->host_no
,
1514 rval
= QLA_FUNCTION_FAILED
;
1515 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1516 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1517 iop
[1] = le32_to_cpu(lg
->io_parameter
[1]);
1519 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1520 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1521 vha
->host_no
, le16_to_cpu(lg
->comp_status
), iop
[0],
1525 case LSC_SCODE_PORTID_USED
:
1526 mb
[0] = MBS_PORT_ID_USED
;
1527 mb
[1] = LSW(iop
[1]);
1529 case LSC_SCODE_NPORT_USED
:
1530 mb
[0] = MBS_LOOP_ID_USED
;
1532 case LSC_SCODE_NOLINK
:
1533 case LSC_SCODE_NOIOCB
:
1534 case LSC_SCODE_NOXCB
:
1535 case LSC_SCODE_CMD_FAILED
:
1536 case LSC_SCODE_NOFABRIC
:
1537 case LSC_SCODE_FW_NOT_READY
:
1538 case LSC_SCODE_NOT_LOGGED_IN
:
1539 case LSC_SCODE_NOPCB
:
1540 case LSC_SCODE_ELS_REJECT
:
1541 case LSC_SCODE_CMD_PARAM_ERR
:
1542 case LSC_SCODE_NONPORT
:
1543 case LSC_SCODE_LOGGED_IN
:
1544 case LSC_SCODE_NOFLOGI_ACC
:
1546 mb
[0] = MBS_COMMAND_ERROR
;
1550 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1552 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1554 mb
[0] = MBS_COMMAND_COMPLETE
;
1556 if (iop
[0] & BIT_4
) {
1562 /* Passback COS information. */
1564 if (lg
->io_parameter
[7] || lg
->io_parameter
[8])
1565 mb
[10] |= BIT_0
; /* Class 2. */
1566 if (lg
->io_parameter
[9] || lg
->io_parameter
[10])
1567 mb
[10] |= BIT_1
; /* Class 3. */
1570 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1576 * qla2x00_login_fabric
1577 * Issue login fabric port mailbox command.
1580 * ha = adapter block pointer.
1581 * loop_id = device loop ID.
1582 * domain = device domain.
1583 * area = device area.
1584 * al_pa = device AL_PA.
1585 * status = pointer for return status.
1586 * opt = command options.
1587 * TARGET_QUEUE_LOCK must be released.
1588 * ADAPTER_STATE_LOCK must be released.
1591 * qla2x00 local function return status code.
1597 qla2x00_login_fabric(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1598 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1602 mbx_cmd_t
*mcp
= &mc
;
1603 struct qla_hw_data
*ha
= vha
->hw
;
1605 DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", vha
->host_no
));
1607 mcp
->mb
[0] = MBC_LOGIN_FABRIC_PORT
;
1608 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1609 if (HAS_EXTENDED_IDS(ha
)) {
1610 mcp
->mb
[1] = loop_id
;
1612 mcp
->out_mb
|= MBX_10
;
1614 mcp
->mb
[1] = (loop_id
<< 8) | opt
;
1616 mcp
->mb
[2] = domain
;
1617 mcp
->mb
[3] = area
<< 8 | al_pa
;
1619 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_2
|MBX_1
|MBX_0
;
1620 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1622 rval
= qla2x00_mailbox_command(vha
, mcp
);
1624 /* Return mailbox statuses. */
1631 /* COS retrieved from Get-Port-Database mailbox command. */
1635 if (rval
!= QLA_SUCCESS
) {
1636 /* RLU tmp code: need to change main mailbox_command function to
1637 * return ok even when the mailbox completion value is not
1638 * SUCCESS. The caller needs to be responsible to interpret
1639 * the return values of this mailbox command if we're not
1640 * to change too much of the existing code.
1642 if (mcp
->mb
[0] == 0x4001 || mcp
->mb
[0] == 0x4002 ||
1643 mcp
->mb
[0] == 0x4003 || mcp
->mb
[0] == 0x4005 ||
1644 mcp
->mb
[0] == 0x4006)
1648 DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x "
1649 "mb[0]=%x mb[1]=%x mb[2]=%x.\n", vha
->host_no
, rval
,
1650 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]));
1653 DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n",
1661 * qla2x00_login_local_device
1662 * Issue login loop port mailbox command.
1665 * ha = adapter block pointer.
1666 * loop_id = device loop ID.
1667 * opt = command options.
1670 * Return status code.
1677 qla2x00_login_local_device(scsi_qla_host_t
*vha
, fc_port_t
*fcport
,
1678 uint16_t *mb_ret
, uint8_t opt
)
1682 mbx_cmd_t
*mcp
= &mc
;
1683 struct qla_hw_data
*ha
= vha
->hw
;
1685 if (IS_FWI2_CAPABLE(ha
))
1686 return qla24xx_login_fabric(vha
, fcport
->loop_id
,
1687 fcport
->d_id
.b
.domain
, fcport
->d_id
.b
.area
,
1688 fcport
->d_id
.b
.al_pa
, mb_ret
, opt
);
1690 DEBUG3(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1692 mcp
->mb
[0] = MBC_LOGIN_LOOP_PORT
;
1693 if (HAS_EXTENDED_IDS(ha
))
1694 mcp
->mb
[1] = fcport
->loop_id
;
1696 mcp
->mb
[1] = fcport
->loop_id
<< 8;
1698 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1699 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_1
|MBX_0
;
1700 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1702 rval
= qla2x00_mailbox_command(vha
, mcp
);
1704 /* Return mailbox statuses. */
1705 if (mb_ret
!= NULL
) {
1706 mb_ret
[0] = mcp
->mb
[0];
1707 mb_ret
[1] = mcp
->mb
[1];
1708 mb_ret
[6] = mcp
->mb
[6];
1709 mb_ret
[7] = mcp
->mb
[7];
1712 if (rval
!= QLA_SUCCESS
) {
1713 /* AV tmp code: need to change main mailbox_command function to
1714 * return ok even when the mailbox completion value is not
1715 * SUCCESS. The caller needs to be responsible to interpret
1716 * the return values of this mailbox command if we're not
1717 * to change too much of the existing code.
1719 if (mcp
->mb
[0] == 0x4005 || mcp
->mb
[0] == 0x4006)
1722 DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1723 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1724 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1725 DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1726 "mb[6]=%x mb[7]=%x.\n", __func__
, vha
->host_no
, rval
,
1727 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]));
1730 DEBUG3(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1737 qla24xx_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1738 uint8_t area
, uint8_t al_pa
)
1741 struct logio_entry_24xx
*lg
;
1743 struct qla_hw_data
*ha
= vha
->hw
;
1745 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1747 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1749 DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n",
1750 __func__
, vha
->host_no
));
1751 return QLA_MEMORY_ALLOC_FAILED
;
1753 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1755 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1756 lg
->entry_count
= 1;
1757 lg
->nport_handle
= cpu_to_le16(loop_id
);
1759 __constant_cpu_to_le16(LCF_COMMAND_LOGO
|LCF_IMPL_LOGO
);
1760 lg
->port_id
[0] = al_pa
;
1761 lg
->port_id
[1] = area
;
1762 lg
->port_id
[2] = domain
;
1763 lg
->vp_index
= vha
->vp_idx
;
1765 rval
= qla2x00_issue_iocb(vha
, lg
, lg_dma
, 0);
1766 if (rval
!= QLA_SUCCESS
) {
1767 DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
1768 "(%x).\n", __func__
, vha
->host_no
, rval
));
1769 } else if (lg
->entry_status
!= 0) {
1770 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1771 "-- error status (%x).\n", __func__
, vha
->host_no
,
1773 rval
= QLA_FUNCTION_FAILED
;
1774 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1775 DEBUG2_3_11(printk("%s(%ld %d): failed to complete IOCB "
1776 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1777 vha
->host_no
, vha
->vp_idx
, le16_to_cpu(lg
->comp_status
),
1778 le32_to_cpu(lg
->io_parameter
[0]),
1779 le32_to_cpu(lg
->io_parameter
[1])));
1782 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
1785 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1791 * qla2x00_fabric_logout
1792 * Issue logout fabric port mailbox command.
1795 * ha = adapter block pointer.
1796 * loop_id = device loop ID.
1797 * TARGET_QUEUE_LOCK must be released.
1798 * ADAPTER_STATE_LOCK must be released.
1801 * qla2x00 local function return status code.
1807 qla2x00_fabric_logout(scsi_qla_host_t
*vha
, uint16_t loop_id
, uint8_t domain
,
1808 uint8_t area
, uint8_t al_pa
)
1812 mbx_cmd_t
*mcp
= &mc
;
1814 DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n",
1817 mcp
->mb
[0] = MBC_LOGOUT_FABRIC_PORT
;
1818 mcp
->out_mb
= MBX_1
|MBX_0
;
1819 if (HAS_EXTENDED_IDS(vha
->hw
)) {
1820 mcp
->mb
[1] = loop_id
;
1822 mcp
->out_mb
|= MBX_10
;
1824 mcp
->mb
[1] = loop_id
<< 8;
1827 mcp
->in_mb
= MBX_1
|MBX_0
;
1828 mcp
->tov
= MBX_TOV_SECONDS
;
1830 rval
= qla2x00_mailbox_command(vha
, mcp
);
1832 if (rval
!= QLA_SUCCESS
) {
1834 DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x "
1835 "mbx1=%x.\n", vha
->host_no
, rval
, mcp
->mb
[1]));
1838 DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n",
1846 * qla2x00_full_login_lip
1847 * Issue full login LIP mailbox command.
1850 * ha = adapter block pointer.
1851 * TARGET_QUEUE_LOCK must be released.
1852 * ADAPTER_STATE_LOCK must be released.
1855 * qla2x00 local function return status code.
1861 qla2x00_full_login_lip(scsi_qla_host_t
*vha
)
1865 mbx_cmd_t
*mcp
= &mc
;
1867 if (IS_QLA81XX(vha
->hw
))
1870 DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
1873 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1874 mcp
->mb
[1] = IS_FWI2_CAPABLE(vha
->hw
) ? BIT_3
: 0;
1877 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1879 mcp
->tov
= MBX_TOV_SECONDS
;
1881 rval
= qla2x00_mailbox_command(vha
, mcp
);
1883 if (rval
!= QLA_SUCCESS
) {
1885 DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
1886 vha
->host_no
, rval
));
1889 DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
1897 * qla2x00_get_id_list
1900 * ha = adapter block pointer.
1903 * qla2x00 local function return status code.
1909 qla2x00_get_id_list(scsi_qla_host_t
*vha
, void *id_list
, dma_addr_t id_list_dma
,
1914 mbx_cmd_t
*mcp
= &mc
;
1916 DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n",
1919 if (id_list
== NULL
)
1920 return QLA_FUNCTION_FAILED
;
1922 mcp
->mb
[0] = MBC_GET_ID_LIST
;
1923 mcp
->out_mb
= MBX_0
;
1924 if (IS_FWI2_CAPABLE(vha
->hw
)) {
1925 mcp
->mb
[2] = MSW(id_list_dma
);
1926 mcp
->mb
[3] = LSW(id_list_dma
);
1927 mcp
->mb
[6] = MSW(MSD(id_list_dma
));
1928 mcp
->mb
[7] = LSW(MSD(id_list_dma
));
1930 mcp
->mb
[9] = vha
->vp_idx
;
1931 mcp
->out_mb
|= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
;
1933 mcp
->mb
[1] = MSW(id_list_dma
);
1934 mcp
->mb
[2] = LSW(id_list_dma
);
1935 mcp
->mb
[3] = MSW(MSD(id_list_dma
));
1936 mcp
->mb
[6] = LSW(MSD(id_list_dma
));
1937 mcp
->out_mb
|= MBX_6
|MBX_3
|MBX_2
|MBX_1
;
1939 mcp
->in_mb
= MBX_1
|MBX_0
;
1940 mcp
->tov
= MBX_TOV_SECONDS
;
1942 rval
= qla2x00_mailbox_command(vha
, mcp
);
1944 if (rval
!= QLA_SUCCESS
) {
1946 DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n",
1947 vha
->host_no
, rval
));
1949 *entries
= mcp
->mb
[1];
1950 DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n",
1958 * qla2x00_get_resource_cnts
1959 * Get current firmware resource counts.
1962 * ha = adapter block pointer.
1965 * qla2x00 local function return status code.
1971 qla2x00_get_resource_cnts(scsi_qla_host_t
*vha
, uint16_t *cur_xchg_cnt
,
1972 uint16_t *orig_xchg_cnt
, uint16_t *cur_iocb_cnt
,
1973 uint16_t *orig_iocb_cnt
, uint16_t *max_npiv_vports
)
1977 mbx_cmd_t
*mcp
= &mc
;
1979 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
1981 mcp
->mb
[0] = MBC_GET_RESOURCE_COUNTS
;
1982 mcp
->out_mb
= MBX_0
;
1983 mcp
->in_mb
= MBX_11
|MBX_10
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1984 mcp
->tov
= MBX_TOV_SECONDS
;
1986 rval
= qla2x00_mailbox_command(vha
, mcp
);
1988 if (rval
!= QLA_SUCCESS
) {
1990 DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__
,
1991 vha
->host_no
, mcp
->mb
[0]));
1993 DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
1994 "mb7=%x mb10=%x mb11=%x.\n", __func__
, vha
->host_no
,
1995 mcp
->mb
[1], mcp
->mb
[2], mcp
->mb
[3], mcp
->mb
[6], mcp
->mb
[7],
1996 mcp
->mb
[10], mcp
->mb
[11]));
1999 *cur_xchg_cnt
= mcp
->mb
[3];
2001 *orig_xchg_cnt
= mcp
->mb
[6];
2003 *cur_iocb_cnt
= mcp
->mb
[7];
2005 *orig_iocb_cnt
= mcp
->mb
[10];
2006 if (vha
->hw
->flags
.npiv_supported
&& max_npiv_vports
)
2007 *max_npiv_vports
= mcp
->mb
[11];
2013 #if defined(QL_DEBUG_LEVEL_3)
2015 * qla2x00_get_fcal_position_map
2016 * Get FCAL (LILP) position map using mailbox command
2019 * ha = adapter state pointer.
2020 * pos_map = buffer pointer (can be NULL).
2023 * qla2x00 local function return status code.
2029 qla2x00_get_fcal_position_map(scsi_qla_host_t
*vha
, char *pos_map
)
2033 mbx_cmd_t
*mcp
= &mc
;
2035 dma_addr_t pmap_dma
;
2036 struct qla_hw_data
*ha
= vha
->hw
;
2038 pmap
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pmap_dma
);
2040 DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****",
2041 __func__
, vha
->host_no
));
2042 return QLA_MEMORY_ALLOC_FAILED
;
2044 memset(pmap
, 0, FCAL_MAP_SIZE
);
2046 mcp
->mb
[0] = MBC_GET_FC_AL_POSITION_MAP
;
2047 mcp
->mb
[2] = MSW(pmap_dma
);
2048 mcp
->mb
[3] = LSW(pmap_dma
);
2049 mcp
->mb
[6] = MSW(MSD(pmap_dma
));
2050 mcp
->mb
[7] = LSW(MSD(pmap_dma
));
2051 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2052 mcp
->in_mb
= MBX_1
|MBX_0
;
2053 mcp
->buf_size
= FCAL_MAP_SIZE
;
2054 mcp
->flags
= MBX_DMA_IN
;
2055 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
2056 rval
= qla2x00_mailbox_command(vha
, mcp
);
2058 if (rval
== QLA_SUCCESS
) {
2059 DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map "
2060 "size (%x)\n", __func__
, vha
->host_no
, mcp
->mb
[0],
2061 mcp
->mb
[1], (unsigned)pmap
[0]));
2062 DEBUG11(qla2x00_dump_buffer(pmap
, pmap
[0] + 1));
2065 memcpy(pos_map
, pmap
, FCAL_MAP_SIZE
);
2067 dma_pool_free(ha
->s_dma_pool
, pmap
, pmap_dma
);
2069 if (rval
!= QLA_SUCCESS
) {
2070 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2071 vha
->host_no
, rval
));
2073 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2081 * qla2x00_get_link_status
2084 * ha = adapter block pointer.
2085 * loop_id = device loop ID.
2086 * ret_buf = pointer to link status return buffer.
2090 * BIT_0 = mem alloc error.
2091 * BIT_1 = mailbox error.
2094 qla2x00_get_link_status(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2095 struct link_statistics
*stats
, dma_addr_t stats_dma
)
2099 mbx_cmd_t
*mcp
= &mc
;
2100 uint32_t *siter
, *diter
, dwords
;
2101 struct qla_hw_data
*ha
= vha
->hw
;
2103 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2105 mcp
->mb
[0] = MBC_GET_LINK_STATUS
;
2106 mcp
->mb
[2] = MSW(stats_dma
);
2107 mcp
->mb
[3] = LSW(stats_dma
);
2108 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2109 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2110 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2112 if (IS_FWI2_CAPABLE(ha
)) {
2113 mcp
->mb
[1] = loop_id
;
2116 mcp
->out_mb
|= MBX_10
|MBX_4
|MBX_1
;
2117 mcp
->in_mb
|= MBX_1
;
2118 } else if (HAS_EXTENDED_IDS(ha
)) {
2119 mcp
->mb
[1] = loop_id
;
2121 mcp
->out_mb
|= MBX_10
|MBX_1
;
2123 mcp
->mb
[1] = loop_id
<< 8;
2124 mcp
->out_mb
|= MBX_1
;
2126 mcp
->tov
= MBX_TOV_SECONDS
;
2127 mcp
->flags
= IOCTL_CMD
;
2128 rval
= qla2x00_mailbox_command(vha
, mcp
);
2130 if (rval
== QLA_SUCCESS
) {
2131 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2132 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2133 __func__
, vha
->host_no
, mcp
->mb
[0]));
2134 rval
= QLA_FUNCTION_FAILED
;
2136 /* Copy over data -- firmware data is LE. */
2137 dwords
= offsetof(struct link_statistics
, unused1
) / 4;
2138 siter
= diter
= &stats
->link_fail_cnt
;
2140 *diter
++ = le32_to_cpu(*siter
++);
2144 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2145 vha
->host_no
, rval
));
2152 qla24xx_get_isp_stats(scsi_qla_host_t
*vha
, struct link_statistics
*stats
,
2153 dma_addr_t stats_dma
)
2157 mbx_cmd_t
*mcp
= &mc
;
2158 uint32_t *siter
, *diter
, dwords
;
2160 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2162 mcp
->mb
[0] = MBC_GET_LINK_PRIV_STATS
;
2163 mcp
->mb
[2] = MSW(stats_dma
);
2164 mcp
->mb
[3] = LSW(stats_dma
);
2165 mcp
->mb
[6] = MSW(MSD(stats_dma
));
2166 mcp
->mb
[7] = LSW(MSD(stats_dma
));
2167 mcp
->mb
[8] = sizeof(struct link_statistics
) / 4;
2168 mcp
->mb
[9] = vha
->vp_idx
;
2170 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2171 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
2172 mcp
->tov
= MBX_TOV_SECONDS
;
2173 mcp
->flags
= IOCTL_CMD
;
2174 rval
= qla2x00_mailbox_command(vha
, mcp
);
2176 if (rval
== QLA_SUCCESS
) {
2177 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2178 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2179 __func__
, vha
->host_no
, mcp
->mb
[0]));
2180 rval
= QLA_FUNCTION_FAILED
;
2182 /* Copy over data -- firmware data is LE. */
2183 dwords
= sizeof(struct link_statistics
) / 4;
2184 siter
= diter
= &stats
->link_fail_cnt
;
2186 *diter
++ = le32_to_cpu(*siter
++);
2190 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2191 vha
->host_no
, rval
));
2198 qla24xx_abort_command(scsi_qla_host_t
*vha
, srb_t
*sp
, struct req_que
*req
)
2202 unsigned long flags
= 0;
2204 struct abort_entry_24xx
*abt
;
2207 struct qla_hw_data
*ha
= vha
->hw
;
2209 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2211 fcport
= sp
->fcport
;
2213 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
2214 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
2215 if (req
->outstanding_cmds
[handle
] == sp
)
2218 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
2219 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
2220 /* Command not found. */
2221 return QLA_FUNCTION_FAILED
;
2224 abt
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &abt_dma
);
2226 DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n",
2227 __func__
, vha
->host_no
));
2228 return QLA_MEMORY_ALLOC_FAILED
;
2230 memset(abt
, 0, sizeof(struct abort_entry_24xx
));
2232 abt
->entry_type
= ABORT_IOCB_TYPE
;
2233 abt
->entry_count
= 1;
2234 abt
->nport_handle
= cpu_to_le16(fcport
->loop_id
);
2235 abt
->handle_to_abort
= handle
;
2236 abt
->port_id
[0] = fcport
->d_id
.b
.al_pa
;
2237 abt
->port_id
[1] = fcport
->d_id
.b
.area
;
2238 abt
->port_id
[2] = fcport
->d_id
.b
.domain
;
2239 abt
->vp_index
= fcport
->vp_idx
;
2241 abt
->req_que_no
= cpu_to_le16(req
->id
);
2243 rval
= qla2x00_issue_iocb(vha
, abt
, abt_dma
, 0);
2244 if (rval
!= QLA_SUCCESS
) {
2245 DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n",
2246 __func__
, vha
->host_no
, rval
));
2247 } else if (abt
->entry_status
!= 0) {
2248 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2249 "-- error status (%x).\n", __func__
, vha
->host_no
,
2250 abt
->entry_status
));
2251 rval
= QLA_FUNCTION_FAILED
;
2252 } else if (abt
->nport_handle
!= __constant_cpu_to_le16(0)) {
2253 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2254 "-- completion status (%x).\n", __func__
, vha
->host_no
,
2255 le16_to_cpu(abt
->nport_handle
)));
2256 rval
= QLA_FUNCTION_FAILED
;
2258 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2261 dma_pool_free(ha
->s_dma_pool
, abt
, abt_dma
);
2266 struct tsk_mgmt_cmd
{
2268 struct tsk_mgmt_entry tsk
;
2269 struct sts_entry_24xx sts
;
2274 __qla24xx_issue_tmf(char *name
, uint32_t type
, struct fc_port
*fcport
,
2278 struct tsk_mgmt_cmd
*tsk
;
2280 scsi_qla_host_t
*vha
;
2281 struct qla_hw_data
*ha
;
2282 struct req_que
*req
;
2283 struct rsp_que
*rsp
;
2285 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->vha
->host_no
));
2289 req
= ha
->req_q_map
[0];
2290 rsp
= ha
->rsp_q_map
[0];
2291 tsk
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &tsk_dma
);
2293 DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
2294 "IOCB.\n", __func__
, vha
->host_no
));
2295 return QLA_MEMORY_ALLOC_FAILED
;
2297 memset(tsk
, 0, sizeof(struct tsk_mgmt_cmd
));
2299 tsk
->p
.tsk
.entry_type
= TSK_MGMT_IOCB_TYPE
;
2300 tsk
->p
.tsk
.entry_count
= 1;
2301 tsk
->p
.tsk
.nport_handle
= cpu_to_le16(fcport
->loop_id
);
2302 tsk
->p
.tsk
.timeout
= cpu_to_le16(ha
->r_a_tov
/ 10 * 2);
2303 tsk
->p
.tsk
.control_flags
= cpu_to_le32(type
);
2304 tsk
->p
.tsk
.port_id
[0] = fcport
->d_id
.b
.al_pa
;
2305 tsk
->p
.tsk
.port_id
[1] = fcport
->d_id
.b
.area
;
2306 tsk
->p
.tsk
.port_id
[2] = fcport
->d_id
.b
.domain
;
2307 tsk
->p
.tsk
.vp_index
= fcport
->vp_idx
;
2308 if (type
== TCF_LUN_RESET
) {
2309 int_to_scsilun(l
, &tsk
->p
.tsk
.lun
);
2310 host_to_fcp_swap((uint8_t *)&tsk
->p
.tsk
.lun
,
2311 sizeof(tsk
->p
.tsk
.lun
));
2314 rval
= qla2x00_issue_iocb(vha
, tsk
, tsk_dma
, 0);
2315 if (rval
!= QLA_SUCCESS
) {
2316 DEBUG2_3_11(printk("%s(%ld): failed to issue %s Reset IOCB "
2317 "(%x).\n", __func__
, vha
->host_no
, name
, rval
));
2318 } else if (tsk
->p
.sts
.entry_status
!= 0) {
2319 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2320 "-- error status (%x).\n", __func__
, vha
->host_no
,
2321 tsk
->p
.sts
.entry_status
));
2322 rval
= QLA_FUNCTION_FAILED
;
2323 } else if (tsk
->p
.sts
.comp_status
!=
2324 __constant_cpu_to_le16(CS_COMPLETE
)) {
2325 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2326 "-- completion status (%x).\n", __func__
,
2327 vha
->host_no
, le16_to_cpu(tsk
->p
.sts
.comp_status
)));
2328 rval
= QLA_FUNCTION_FAILED
;
2331 /* Issue marker IOCB. */
2332 rval2
= qla2x00_marker(vha
, req
, rsp
, fcport
->loop_id
, l
,
2333 type
== TCF_LUN_RESET
? MK_SYNC_ID_LUN
: MK_SYNC_ID
);
2334 if (rval2
!= QLA_SUCCESS
) {
2335 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
2336 "(%x).\n", __func__
, vha
->host_no
, rval2
));
2338 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2341 dma_pool_free(ha
->s_dma_pool
, tsk
, tsk_dma
);
2347 qla24xx_abort_target(struct fc_port
*fcport
, unsigned int l
)
2349 return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET
, fcport
, l
);
2353 qla24xx_lun_reset(struct fc_port
*fcport
, unsigned int l
)
2355 return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET
, fcport
, l
);
2359 qla2x00_system_error(scsi_qla_host_t
*vha
)
2363 mbx_cmd_t
*mcp
= &mc
;
2364 struct qla_hw_data
*ha
= vha
->hw
;
2366 if (!IS_QLA23XX(ha
) && !IS_FWI2_CAPABLE(ha
))
2367 return QLA_FUNCTION_FAILED
;
2369 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2371 mcp
->mb
[0] = MBC_GEN_SYSTEM_ERROR
;
2372 mcp
->out_mb
= MBX_0
;
2376 rval
= qla2x00_mailbox_command(vha
, mcp
);
2378 if (rval
!= QLA_SUCCESS
) {
2379 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2380 vha
->host_no
, rval
));
2382 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2389 * qla2x00_set_serdes_params() -
2395 qla2x00_set_serdes_params(scsi_qla_host_t
*vha
, uint16_t sw_em_1g
,
2396 uint16_t sw_em_2g
, uint16_t sw_em_4g
)
2400 mbx_cmd_t
*mcp
= &mc
;
2402 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2404 mcp
->mb
[0] = MBC_SERDES_PARAMS
;
2406 mcp
->mb
[2] = sw_em_1g
| BIT_15
;
2407 mcp
->mb
[3] = sw_em_2g
| BIT_15
;
2408 mcp
->mb
[4] = sw_em_4g
| BIT_15
;
2409 mcp
->out_mb
= MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2411 mcp
->tov
= MBX_TOV_SECONDS
;
2413 rval
= qla2x00_mailbox_command(vha
, mcp
);
2415 if (rval
!= QLA_SUCCESS
) {
2417 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2418 vha
->host_no
, rval
, mcp
->mb
[0]));
2421 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2428 qla2x00_stop_firmware(scsi_qla_host_t
*vha
)
2432 mbx_cmd_t
*mcp
= &mc
;
2434 if (!IS_FWI2_CAPABLE(vha
->hw
))
2435 return QLA_FUNCTION_FAILED
;
2437 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2439 mcp
->mb
[0] = MBC_STOP_FIRMWARE
;
2440 mcp
->out_mb
= MBX_0
;
2444 rval
= qla2x00_mailbox_command(vha
, mcp
);
2446 if (rval
!= QLA_SUCCESS
) {
2447 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2448 vha
->host_no
, rval
));
2450 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2457 qla2x00_enable_eft_trace(scsi_qla_host_t
*vha
, dma_addr_t eft_dma
,
2462 mbx_cmd_t
*mcp
= &mc
;
2464 if (!IS_FWI2_CAPABLE(vha
->hw
))
2465 return QLA_FUNCTION_FAILED
;
2467 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2469 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2470 mcp
->mb
[1] = TC_EFT_ENABLE
;
2471 mcp
->mb
[2] = LSW(eft_dma
);
2472 mcp
->mb
[3] = MSW(eft_dma
);
2473 mcp
->mb
[4] = LSW(MSD(eft_dma
));
2474 mcp
->mb
[5] = MSW(MSD(eft_dma
));
2475 mcp
->mb
[6] = buffers
;
2476 mcp
->mb
[7] = TC_AEN_DISABLE
;
2477 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2478 mcp
->in_mb
= MBX_1
|MBX_0
;
2479 mcp
->tov
= MBX_TOV_SECONDS
;
2481 rval
= qla2x00_mailbox_command(vha
, mcp
);
2482 if (rval
!= QLA_SUCCESS
) {
2483 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2484 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2486 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2493 qla2x00_disable_eft_trace(scsi_qla_host_t
*vha
)
2497 mbx_cmd_t
*mcp
= &mc
;
2499 if (!IS_FWI2_CAPABLE(vha
->hw
))
2500 return QLA_FUNCTION_FAILED
;
2502 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2504 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2505 mcp
->mb
[1] = TC_EFT_DISABLE
;
2506 mcp
->out_mb
= MBX_1
|MBX_0
;
2507 mcp
->in_mb
= MBX_1
|MBX_0
;
2508 mcp
->tov
= MBX_TOV_SECONDS
;
2510 rval
= qla2x00_mailbox_command(vha
, mcp
);
2511 if (rval
!= QLA_SUCCESS
) {
2512 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2513 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2515 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2522 qla2x00_enable_fce_trace(scsi_qla_host_t
*vha
, dma_addr_t fce_dma
,
2523 uint16_t buffers
, uint16_t *mb
, uint32_t *dwords
)
2527 mbx_cmd_t
*mcp
= &mc
;
2529 if (!IS_QLA25XX(vha
->hw
) && !IS_QLA81XX(vha
->hw
))
2530 return QLA_FUNCTION_FAILED
;
2532 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2534 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2535 mcp
->mb
[1] = TC_FCE_ENABLE
;
2536 mcp
->mb
[2] = LSW(fce_dma
);
2537 mcp
->mb
[3] = MSW(fce_dma
);
2538 mcp
->mb
[4] = LSW(MSD(fce_dma
));
2539 mcp
->mb
[5] = MSW(MSD(fce_dma
));
2540 mcp
->mb
[6] = buffers
;
2541 mcp
->mb
[7] = TC_AEN_DISABLE
;
2543 mcp
->mb
[9] = TC_FCE_DEFAULT_RX_SIZE
;
2544 mcp
->mb
[10] = TC_FCE_DEFAULT_TX_SIZE
;
2545 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2547 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2548 mcp
->tov
= MBX_TOV_SECONDS
;
2550 rval
= qla2x00_mailbox_command(vha
, mcp
);
2551 if (rval
!= QLA_SUCCESS
) {
2552 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2553 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2555 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2558 memcpy(mb
, mcp
->mb
, 8 * sizeof(*mb
));
2567 qla2x00_disable_fce_trace(scsi_qla_host_t
*vha
, uint64_t *wr
, uint64_t *rd
)
2571 mbx_cmd_t
*mcp
= &mc
;
2573 if (!IS_FWI2_CAPABLE(vha
->hw
))
2574 return QLA_FUNCTION_FAILED
;
2576 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2578 mcp
->mb
[0] = MBC_TRACE_CONTROL
;
2579 mcp
->mb
[1] = TC_FCE_DISABLE
;
2580 mcp
->mb
[2] = TC_FCE_DISABLE_TRACE
;
2581 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
2582 mcp
->in_mb
= MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|
2584 mcp
->tov
= MBX_TOV_SECONDS
;
2586 rval
= qla2x00_mailbox_command(vha
, mcp
);
2587 if (rval
!= QLA_SUCCESS
) {
2588 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
2589 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
2591 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2594 *wr
= (uint64_t) mcp
->mb
[5] << 48 |
2595 (uint64_t) mcp
->mb
[4] << 32 |
2596 (uint64_t) mcp
->mb
[3] << 16 |
2597 (uint64_t) mcp
->mb
[2];
2599 *rd
= (uint64_t) mcp
->mb
[9] << 48 |
2600 (uint64_t) mcp
->mb
[8] << 32 |
2601 (uint64_t) mcp
->mb
[7] << 16 |
2602 (uint64_t) mcp
->mb
[6];
2609 qla2x00_read_sfp(scsi_qla_host_t
*vha
, dma_addr_t sfp_dma
, uint16_t addr
,
2610 uint16_t off
, uint16_t count
)
2614 mbx_cmd_t
*mcp
= &mc
;
2616 if (!IS_FWI2_CAPABLE(vha
->hw
))
2617 return QLA_FUNCTION_FAILED
;
2619 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2621 mcp
->mb
[0] = MBC_READ_SFP
;
2623 mcp
->mb
[2] = MSW(sfp_dma
);
2624 mcp
->mb
[3] = LSW(sfp_dma
);
2625 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
2626 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
2630 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2632 mcp
->tov
= MBX_TOV_SECONDS
;
2634 rval
= qla2x00_mailbox_command(vha
, mcp
);
2636 if (rval
!= QLA_SUCCESS
) {
2637 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2638 vha
->host_no
, rval
, mcp
->mb
[0]));
2640 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2647 qla2x00_set_idma_speed(scsi_qla_host_t
*vha
, uint16_t loop_id
,
2648 uint16_t port_speed
, uint16_t *mb
)
2652 mbx_cmd_t
*mcp
= &mc
;
2654 if (!IS_IIDMA_CAPABLE(vha
->hw
))
2655 return QLA_FUNCTION_FAILED
;
2657 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2659 mcp
->mb
[0] = MBC_PORT_PARAMS
;
2660 mcp
->mb
[1] = loop_id
;
2662 mcp
->mb
[3] = port_speed
& (BIT_2
|BIT_1
|BIT_0
);
2663 mcp
->mb
[4] = mcp
->mb
[5] = 0;
2664 mcp
->out_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2665 mcp
->in_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_1
|MBX_0
;
2666 mcp
->tov
= MBX_TOV_SECONDS
;
2668 rval
= qla2x00_mailbox_command(vha
, mcp
);
2670 /* Return mailbox statuses. */
2679 if (rval
!= QLA_SUCCESS
) {
2680 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2681 vha
->host_no
, rval
));
2683 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
2690 qla24xx_report_id_acquisition(scsi_qla_host_t
*vha
,
2691 struct vp_rpt_id_entry_24xx
*rptid_entry
)
2694 uint16_t stat
= le16_to_cpu(rptid_entry
->vp_idx
);
2695 struct qla_hw_data
*ha
= vha
->hw
;
2696 scsi_qla_host_t
*vp
;
2697 scsi_qla_host_t
*tvp
;
2699 if (rptid_entry
->entry_status
!= 0)
2702 if (rptid_entry
->format
== 0) {
2703 DEBUG15(printk("%s:format 0 : scsi(%ld) number of VPs setup %d,"
2704 " number of VPs acquired %d\n", __func__
, vha
->host_no
,
2705 MSB(rptid_entry
->vp_count
), LSB(rptid_entry
->vp_count
)));
2706 DEBUG15(printk("%s primary port id %02x%02x%02x\n", __func__
,
2707 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2708 rptid_entry
->port_id
[0]));
2709 } else if (rptid_entry
->format
== 1) {
2711 DEBUG15(printk("%s:format 1: scsi(%ld): VP[%d] enabled "
2713 "with port id %02x%02x%02x\n", __func__
, vha
->host_no
,
2715 rptid_entry
->port_id
[2], rptid_entry
->port_id
[1],
2716 rptid_entry
->port_id
[0]));
2723 list_for_each_entry_safe(vp
, tvp
, &ha
->vp_list
, list
)
2724 if (vp_idx
== vp
->vp_idx
)
2729 vp
->d_id
.b
.domain
= rptid_entry
->port_id
[2];
2730 vp
->d_id
.b
.area
= rptid_entry
->port_id
[1];
2731 vp
->d_id
.b
.al_pa
= rptid_entry
->port_id
[0];
2734 * Cannot configure here as we are still sitting on the
2735 * response queue. Handle it in dpc context.
2737 set_bit(VP_IDX_ACQUIRED
, &vp
->vp_flags
);
2738 set_bit(VP_DPC_NEEDED
, &vha
->dpc_flags
);
2740 qla2xxx_wake_dpc(vha
);
2745 * qla24xx_modify_vp_config
2746 * Change VP configuration for vha
2749 * vha = adapter block pointer.
2752 * qla2xxx local function return status code.
2758 qla24xx_modify_vp_config(scsi_qla_host_t
*vha
)
2761 struct vp_config_entry_24xx
*vpmod
;
2762 dma_addr_t vpmod_dma
;
2763 struct qla_hw_data
*ha
= vha
->hw
;
2764 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2766 /* This can be called by the parent */
2768 vpmod
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vpmod_dma
);
2770 DEBUG2_3(printk("%s(%ld): failed to allocate Modify VP "
2771 "IOCB.\n", __func__
, vha
->host_no
));
2772 return QLA_MEMORY_ALLOC_FAILED
;
2775 memset(vpmod
, 0, sizeof(struct vp_config_entry_24xx
));
2776 vpmod
->entry_type
= VP_CONFIG_IOCB_TYPE
;
2777 vpmod
->entry_count
= 1;
2778 vpmod
->command
= VCT_COMMAND_MOD_ENABLE_VPS
;
2779 vpmod
->vp_count
= 1;
2780 vpmod
->vp_index1
= vha
->vp_idx
;
2781 vpmod
->options_idx1
= BIT_3
|BIT_4
|BIT_5
;
2782 memcpy(vpmod
->node_name_idx1
, vha
->node_name
, WWN_SIZE
);
2783 memcpy(vpmod
->port_name_idx1
, vha
->port_name
, WWN_SIZE
);
2784 vpmod
->entry_count
= 1;
2786 rval
= qla2x00_issue_iocb(base_vha
, vpmod
, vpmod_dma
, 0);
2787 if (rval
!= QLA_SUCCESS
) {
2788 DEBUG2_3_11(printk("%s(%ld): failed to issue VP config IOCB"
2789 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2790 } else if (vpmod
->comp_status
!= 0) {
2791 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2792 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2793 vpmod
->comp_status
));
2794 rval
= QLA_FUNCTION_FAILED
;
2795 } else if (vpmod
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2796 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2797 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2798 le16_to_cpu(vpmod
->comp_status
)));
2799 rval
= QLA_FUNCTION_FAILED
;
2802 DEBUG11(printk("%s(%ld): done.\n", __func__
,
2803 base_vha
->host_no
));
2804 fc_vport_set_state(vha
->fc_vport
, FC_VPORT_INITIALIZING
);
2806 dma_pool_free(ha
->s_dma_pool
, vpmod
, vpmod_dma
);
2812 * qla24xx_control_vp
2813 * Enable a virtual port for given host
2816 * ha = adapter block pointer.
2817 * vhba = virtual adapter (unused)
2818 * index = index number for enabled VP
2821 * qla2xxx local function return status code.
2827 qla24xx_control_vp(scsi_qla_host_t
*vha
, int cmd
)
2831 struct vp_ctrl_entry_24xx
*vce
;
2833 struct qla_hw_data
*ha
= vha
->hw
;
2834 int vp_index
= vha
->vp_idx
;
2835 struct scsi_qla_host
*base_vha
= pci_get_drvdata(ha
->pdev
);
2837 DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__
,
2838 vha
->host_no
, vp_index
));
2840 if (vp_index
== 0 || vp_index
>= ha
->max_npiv_vports
)
2841 return QLA_PARAMETER_ERROR
;
2843 vce
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &vce_dma
);
2845 DEBUG2_3(printk("%s(%ld): "
2846 "failed to allocate VP Control IOCB.\n", __func__
,
2847 base_vha
->host_no
));
2848 return QLA_MEMORY_ALLOC_FAILED
;
2850 memset(vce
, 0, sizeof(struct vp_ctrl_entry_24xx
));
2852 vce
->entry_type
= VP_CTRL_IOCB_TYPE
;
2853 vce
->entry_count
= 1;
2854 vce
->command
= cpu_to_le16(cmd
);
2855 vce
->vp_count
= __constant_cpu_to_le16(1);
2857 /* index map in firmware starts with 1; decrement index
2858 * this is ok as we never use index 0
2860 map
= (vp_index
- 1) / 8;
2861 pos
= (vp_index
- 1) & 7;
2862 mutex_lock(&ha
->vport_lock
);
2863 vce
->vp_idx_map
[map
] |= 1 << pos
;
2864 mutex_unlock(&ha
->vport_lock
);
2866 rval
= qla2x00_issue_iocb(base_vha
, vce
, vce_dma
, 0);
2867 if (rval
!= QLA_SUCCESS
) {
2868 DEBUG2_3_11(printk("%s(%ld): failed to issue VP control IOCB"
2869 "(%x).\n", __func__
, base_vha
->host_no
, rval
));
2870 printk("%s(%ld): failed to issue VP control IOCB"
2871 "(%x).\n", __func__
, base_vha
->host_no
, rval
);
2872 } else if (vce
->entry_status
!= 0) {
2873 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2874 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2875 vce
->entry_status
));
2876 printk("%s(%ld): failed to complete IOCB "
2877 "-- error status (%x).\n", __func__
, base_vha
->host_no
,
2879 rval
= QLA_FUNCTION_FAILED
;
2880 } else if (vce
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
2881 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2882 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2883 le16_to_cpu(vce
->comp_status
)));
2884 printk("%s(%ld): failed to complete IOCB "
2885 "-- completion status (%x).\n", __func__
, base_vha
->host_no
,
2886 le16_to_cpu(vce
->comp_status
));
2887 rval
= QLA_FUNCTION_FAILED
;
2889 DEBUG2(printk("%s(%ld): done.\n", __func__
, base_vha
->host_no
));
2892 dma_pool_free(ha
->s_dma_pool
, vce
, vce_dma
);
2898 * qla2x00_send_change_request
2899 * Receive or disable RSCN request from fabric controller
2902 * ha = adapter block pointer
2903 * format = registration format:
2905 * 1 - Fabric detected registration
2906 * 2 - N_port detected registration
2907 * 3 - Full registration
2908 * FF - clear registration
2909 * vp_idx = Virtual port index
2912 * qla2x00 local function return status code.
2919 qla2x00_send_change_request(scsi_qla_host_t
*vha
, uint16_t format
,
2924 mbx_cmd_t
*mcp
= &mc
;
2927 * This command is implicitly executed by firmware during login for the
2931 return QLA_FUNCTION_FAILED
;
2933 mcp
->mb
[0] = MBC_SEND_CHANGE_REQUEST
;
2934 mcp
->mb
[1] = format
;
2935 mcp
->mb
[9] = vp_idx
;
2936 mcp
->out_mb
= MBX_9
|MBX_1
|MBX_0
;
2937 mcp
->in_mb
= MBX_0
|MBX_1
;
2938 mcp
->tov
= MBX_TOV_SECONDS
;
2940 rval
= qla2x00_mailbox_command(vha
, mcp
);
2942 if (rval
== QLA_SUCCESS
) {
2943 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2953 qla2x00_dump_ram(scsi_qla_host_t
*vha
, dma_addr_t req_dma
, uint32_t addr
,
2958 mbx_cmd_t
*mcp
= &mc
;
2960 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
2962 if (MSW(addr
) || IS_FWI2_CAPABLE(vha
->hw
)) {
2963 mcp
->mb
[0] = MBC_DUMP_RISC_RAM_EXTENDED
;
2964 mcp
->mb
[8] = MSW(addr
);
2965 mcp
->out_mb
= MBX_8
|MBX_0
;
2967 mcp
->mb
[0] = MBC_DUMP_RISC_RAM
;
2968 mcp
->out_mb
= MBX_0
;
2970 mcp
->mb
[1] = LSW(addr
);
2971 mcp
->mb
[2] = MSW(req_dma
);
2972 mcp
->mb
[3] = LSW(req_dma
);
2973 mcp
->mb
[6] = MSW(MSD(req_dma
));
2974 mcp
->mb
[7] = LSW(MSD(req_dma
));
2975 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
2976 if (IS_FWI2_CAPABLE(vha
->hw
)) {
2977 mcp
->mb
[4] = MSW(size
);
2978 mcp
->mb
[5] = LSW(size
);
2979 mcp
->out_mb
|= MBX_5
|MBX_4
;
2981 mcp
->mb
[4] = LSW(size
);
2982 mcp
->out_mb
|= MBX_4
;
2986 mcp
->tov
= MBX_TOV_SECONDS
;
2988 rval
= qla2x00_mailbox_command(vha
, mcp
);
2990 if (rval
!= QLA_SUCCESS
) {
2991 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
2992 vha
->host_no
, rval
, mcp
->mb
[0]));
2994 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3000 /* 84XX Support **************************************************************/
3002 struct cs84xx_mgmt_cmd
{
3004 struct verify_chip_entry_84xx req
;
3005 struct verify_chip_rsp_84xx rsp
;
3010 qla84xx_verify_chip(struct scsi_qla_host
*vha
, uint16_t *status
)
3013 struct cs84xx_mgmt_cmd
*mn
;
3016 unsigned long flags
;
3017 struct qla_hw_data
*ha
= vha
->hw
;
3019 DEBUG16(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3021 mn
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &mn_dma
);
3023 DEBUG2_3(printk("%s(%ld): failed to allocate Verify ISP84XX "
3024 "IOCB.\n", __func__
, vha
->host_no
));
3025 return QLA_MEMORY_ALLOC_FAILED
;
3029 options
= ha
->cs84xx
->fw_update
? VCO_FORCE_UPDATE
: 0;
3030 /* Diagnostic firmware? */
3031 /* options |= MENLO_DIAG_FW; */
3032 /* We update the firmware with only one data sequence. */
3033 options
|= VCO_END_OF_DATA
;
3037 memset(mn
, 0, sizeof(*mn
));
3038 mn
->p
.req
.entry_type
= VERIFY_CHIP_IOCB_TYPE
;
3039 mn
->p
.req
.entry_count
= 1;
3040 mn
->p
.req
.options
= cpu_to_le16(options
);
3042 DEBUG16(printk("%s(%ld): Dump of Verify Request.\n", __func__
,
3044 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3047 rval
= qla2x00_issue_iocb_timeout(vha
, mn
, mn_dma
, 0, 120);
3048 if (rval
!= QLA_SUCCESS
) {
3049 DEBUG2_16(printk("%s(%ld): failed to issue Verify "
3050 "IOCB (%x).\n", __func__
, vha
->host_no
, rval
));
3054 DEBUG16(printk("%s(%ld): Dump of Verify Response.\n", __func__
,
3056 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn
,
3059 status
[0] = le16_to_cpu(mn
->p
.rsp
.comp_status
);
3060 status
[1] = status
[0] == CS_VCS_CHIP_FAILURE
?
3061 le16_to_cpu(mn
->p
.rsp
.failure_code
) : 0;
3062 DEBUG2_16(printk("%s(%ld): cs=%x fc=%x\n", __func__
,
3063 vha
->host_no
, status
[0], status
[1]));
3065 if (status
[0] != CS_COMPLETE
) {
3066 rval
= QLA_FUNCTION_FAILED
;
3067 if (!(options
& VCO_DONT_UPDATE_FW
)) {
3068 DEBUG2_16(printk("%s(%ld): Firmware update "
3069 "failed. Retrying without update "
3070 "firmware.\n", __func__
, vha
->host_no
));
3071 options
|= VCO_DONT_UPDATE_FW
;
3072 options
&= ~VCO_FORCE_UPDATE
;
3076 DEBUG2_16(printk("%s(%ld): firmware updated to %x.\n",
3077 __func__
, vha
->host_no
,
3078 le32_to_cpu(mn
->p
.rsp
.fw_ver
)));
3080 /* NOTE: we only update OP firmware. */
3081 spin_lock_irqsave(&ha
->cs84xx
->access_lock
, flags
);
3082 ha
->cs84xx
->op_fw_version
=
3083 le32_to_cpu(mn
->p
.rsp
.fw_ver
);
3084 spin_unlock_irqrestore(&ha
->cs84xx
->access_lock
,
3090 dma_pool_free(ha
->s_dma_pool
, mn
, mn_dma
);
3092 if (rval
!= QLA_SUCCESS
) {
3093 DEBUG2_16(printk("%s(%ld): failed=%x.\n", __func__
,
3094 vha
->host_no
, rval
));
3096 DEBUG16(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3103 qla25xx_init_req_que(struct scsi_qla_host
*vha
, struct req_que
*req
)
3106 unsigned long flags
;
3108 mbx_cmd_t
*mcp
= &mc
;
3109 struct device_reg_25xxmq __iomem
*reg
;
3110 struct qla_hw_data
*ha
= vha
->hw
;
3112 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3113 mcp
->mb
[1] = req
->options
;
3114 mcp
->mb
[2] = MSW(LSD(req
->dma
));
3115 mcp
->mb
[3] = LSW(LSD(req
->dma
));
3116 mcp
->mb
[6] = MSW(MSD(req
->dma
));
3117 mcp
->mb
[7] = LSW(MSD(req
->dma
));
3118 mcp
->mb
[5] = req
->length
;
3120 mcp
->mb
[10] = req
->rsp
->id
;
3121 mcp
->mb
[12] = req
->qos
;
3122 mcp
->mb
[11] = req
->vp_idx
;
3123 mcp
->mb
[13] = req
->rid
;
3125 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3126 QLA_QUE_PAGE
* req
->id
);
3128 mcp
->mb
[4] = req
->id
;
3129 /* que in ptr index */
3131 /* que out ptr index */
3133 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
|MBX_7
|
3134 MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3136 mcp
->flags
= MBX_DMA_OUT
;
3139 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3140 if (!(req
->options
& BIT_0
)) {
3141 WRT_REG_DWORD(®
->req_q_in
, 0);
3142 WRT_REG_DWORD(®
->req_q_out
, 0);
3144 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3146 rval
= qla2x00_mailbox_command(vha
, mcp
);
3147 if (rval
!= QLA_SUCCESS
)
3148 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x mb0=%x.\n",
3149 __func__
, vha
->host_no
, rval
, mcp
->mb
[0]));
3154 qla25xx_init_rsp_que(struct scsi_qla_host
*vha
, struct rsp_que
*rsp
)
3157 unsigned long flags
;
3159 mbx_cmd_t
*mcp
= &mc
;
3160 struct device_reg_25xxmq __iomem
*reg
;
3161 struct qla_hw_data
*ha
= vha
->hw
;
3163 mcp
->mb
[0] = MBC_INITIALIZE_MULTIQ
;
3164 mcp
->mb
[1] = rsp
->options
;
3165 mcp
->mb
[2] = MSW(LSD(rsp
->dma
));
3166 mcp
->mb
[3] = LSW(LSD(rsp
->dma
));
3167 mcp
->mb
[6] = MSW(MSD(rsp
->dma
));
3168 mcp
->mb
[7] = LSW(MSD(rsp
->dma
));
3169 mcp
->mb
[5] = rsp
->length
;
3170 mcp
->mb
[11] = rsp
->vp_idx
;
3171 mcp
->mb
[14] = rsp
->msix
->entry
;
3172 mcp
->mb
[13] = rsp
->rid
;
3174 reg
= (struct device_reg_25xxmq
*)((void *)(ha
->mqiobase
) +
3175 QLA_QUE_PAGE
* rsp
->id
);
3177 mcp
->mb
[4] = rsp
->id
;
3178 /* que in ptr index */
3180 /* que out ptr index */
3182 mcp
->out_mb
= MBX_14
|MBX_13
|MBX_12
|MBX_11
|MBX_10
|MBX_9
|MBX_8
|MBX_7
3183 |MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3185 mcp
->flags
= MBX_DMA_OUT
;
3188 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
3189 if (!(rsp
->options
& BIT_0
)) {
3190 WRT_REG_DWORD(®
->rsp_q_out
, 0);
3191 WRT_REG_DWORD(®
->rsp_q_in
, 0);
3194 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
3196 rval
= qla2x00_mailbox_command(vha
, mcp
);
3197 if (rval
!= QLA_SUCCESS
)
3198 DEBUG2_3_11(printk(KERN_WARNING
"%s(%ld): failed=%x "
3199 "mb0=%x.\n", __func__
,
3200 vha
->host_no
, rval
, mcp
->mb
[0]));
3205 qla81xx_idc_ack(scsi_qla_host_t
*vha
, uint16_t *mb
)
3209 mbx_cmd_t
*mcp
= &mc
;
3211 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3213 mcp
->mb
[0] = MBC_IDC_ACK
;
3214 memcpy(&mcp
->mb
[1], mb
, QLA_IDC_ACK_REGS
* sizeof(uint16_t));
3215 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3217 mcp
->tov
= MBX_TOV_SECONDS
;
3219 rval
= qla2x00_mailbox_command(vha
, mcp
);
3221 if (rval
!= QLA_SUCCESS
) {
3222 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3223 vha
->host_no
, rval
, mcp
->mb
[0]));
3225 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3232 qla81xx_fac_get_sector_size(scsi_qla_host_t
*vha
, uint32_t *sector_size
)
3236 mbx_cmd_t
*mcp
= &mc
;
3238 if (!IS_QLA81XX(vha
->hw
))
3239 return QLA_FUNCTION_FAILED
;
3241 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3243 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3244 mcp
->mb
[1] = FAC_OPT_CMD_GET_SECTOR_SIZE
;
3245 mcp
->out_mb
= MBX_1
|MBX_0
;
3246 mcp
->in_mb
= MBX_1
|MBX_0
;
3247 mcp
->tov
= MBX_TOV_SECONDS
;
3249 rval
= qla2x00_mailbox_command(vha
, mcp
);
3251 if (rval
!= QLA_SUCCESS
) {
3252 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
3253 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3255 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3256 *sector_size
= mcp
->mb
[1];
3263 qla81xx_fac_do_write_enable(scsi_qla_host_t
*vha
, int enable
)
3267 mbx_cmd_t
*mcp
= &mc
;
3269 if (!IS_QLA81XX(vha
->hw
))
3270 return QLA_FUNCTION_FAILED
;
3272 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3274 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3275 mcp
->mb
[1] = enable
? FAC_OPT_CMD_WRITE_ENABLE
:
3276 FAC_OPT_CMD_WRITE_PROTECT
;
3277 mcp
->out_mb
= MBX_1
|MBX_0
;
3278 mcp
->in_mb
= MBX_1
|MBX_0
;
3279 mcp
->tov
= MBX_TOV_SECONDS
;
3281 rval
= qla2x00_mailbox_command(vha
, mcp
);
3283 if (rval
!= QLA_SUCCESS
) {
3284 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
3285 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3287 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3294 qla81xx_fac_erase_sector(scsi_qla_host_t
*vha
, uint32_t start
, uint32_t finish
)
3298 mbx_cmd_t
*mcp
= &mc
;
3300 if (!IS_QLA81XX(vha
->hw
))
3301 return QLA_FUNCTION_FAILED
;
3303 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3305 mcp
->mb
[0] = MBC_FLASH_ACCESS_CTRL
;
3306 mcp
->mb
[1] = FAC_OPT_CMD_ERASE_SECTOR
;
3307 mcp
->mb
[2] = LSW(start
);
3308 mcp
->mb
[3] = MSW(start
);
3309 mcp
->mb
[4] = LSW(finish
);
3310 mcp
->mb
[5] = MSW(finish
);
3311 mcp
->out_mb
= MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3312 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
3313 mcp
->tov
= MBX_TOV_SECONDS
;
3315 rval
= qla2x00_mailbox_command(vha
, mcp
);
3317 if (rval
!= QLA_SUCCESS
) {
3318 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
3319 "mb[2]=%x.\n", __func__
, vha
->host_no
, rval
, mcp
->mb
[0],
3320 mcp
->mb
[1], mcp
->mb
[2]));
3322 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3329 qla81xx_restart_mpi_firmware(scsi_qla_host_t
*vha
)
3333 mbx_cmd_t
*mcp
= &mc
;
3335 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3337 mcp
->mb
[0] = MBC_RESTART_MPI_FW
;
3338 mcp
->out_mb
= MBX_0
;
3339 mcp
->in_mb
= MBX_0
|MBX_1
;
3340 mcp
->tov
= MBX_TOV_SECONDS
;
3342 rval
= qla2x00_mailbox_command(vha
, mcp
);
3344 if (rval
!= QLA_SUCCESS
) {
3345 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x mb[1]=0x%x.\n",
3346 __func__
, vha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
3348 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));
3355 qla2x00_read_edc(scsi_qla_host_t
*vha
, uint16_t dev
, uint16_t adr
,
3356 dma_addr_t sfp_dma
, uint8_t *sfp
, uint16_t len
, uint16_t opt
)
3360 mbx_cmd_t
*mcp
= &mc
;
3362 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3364 mcp
->mb
[0] = MBC_READ_SFP
;
3366 mcp
->mb
[2] = MSW(sfp_dma
);
3367 mcp
->mb
[3] = LSW(sfp_dma
);
3368 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
3369 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
3373 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3375 mcp
->tov
= MBX_TOV_SECONDS
;
3377 rval
= qla2x00_mailbox_command(vha
, mcp
);
3383 if (rval
!= QLA_SUCCESS
) {
3384 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3385 vha
->host_no
, rval
, mcp
->mb
[0]));
3387 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
3394 qla2x00_write_edc(scsi_qla_host_t
*vha
, uint16_t dev
, uint16_t adr
,
3395 dma_addr_t sfp_dma
, uint8_t *sfp
, uint16_t len
, uint16_t opt
)
3399 mbx_cmd_t
*mcp
= &mc
;
3401 DEBUG11(printk("%s(%ld): entered.\n", __func__
, vha
->host_no
));
3407 mcp
->mb
[0] = MBC_WRITE_SFP
;
3409 mcp
->mb
[2] = MSW(sfp_dma
);
3410 mcp
->mb
[3] = LSW(sfp_dma
);
3411 mcp
->mb
[6] = MSW(MSD(sfp_dma
));
3412 mcp
->mb
[7] = LSW(MSD(sfp_dma
));
3416 mcp
->out_mb
= MBX_10
|MBX_9
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
3418 mcp
->tov
= MBX_TOV_SECONDS
;
3420 rval
= qla2x00_mailbox_command(vha
, mcp
);
3422 if (rval
!= QLA_SUCCESS
) {
3423 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
3424 vha
->host_no
, rval
, mcp
->mb
[0]));
3426 DEBUG11(printk("%s(%ld): done.\n", __func__
, vha
->host_no
));