include/asm-x86/mc146818rtc_32.h

   1 /*
   2  * Machine dependent access functions for RTC registers.
   3  */
   4 #ifndef _ASM_MC146818RTC_H
   5 #define _ASM_MC146818RTC_H
   6
   7 #include <asm/io.h>
   8 #include <asm/system.h>
   9 #include <asm/processor.h>
  10 #include <linux/mc146818rtc.h>
  11
  12 #ifndef RTC_PORT
  13 #define RTC_PORT(x)     (0x70 + (x))
  14 #define RTC_ALWAYS_BCD  1       /* RTC operates in binary mode */
  15 #endif
  16
  17 #ifdef __HAVE_ARCH_CMPXCHG
  18 /*
  19  * This lock provides nmi access to the CMOS/RTC registers.  It has some
  20  * special properties.  It is owned by a CPU and stores the index register
  21  * currently being accessed (if owned).  The idea here is that it works
  22  * like a normal lock (normally).  However, in an NMI, the NMI code will
  23  * first check to see if its CPU owns the lock, meaning that the NMI
  24  * interrupted during the read/write of the device.  If it does, it goes ahead
  25  * and performs the access and then restores the index register.  If it does
  26  * not, it locks normally.
  27  *
  28  * Note that since we are working with NMIs, we need this lock even in
  29  * a non-SMP machine just to mark that the lock is owned.
  30  *
  31  * This only works with compare-and-swap.  There is no other way to
  32  * atomically claim the lock and set the owner.
  33  */
  34 #include <linux/smp.h>
  35 extern volatile unsigned long cmos_lock;
  36
  37 /*
  38  * All of these below must be called with interrupts off, preempt
  39  * disabled, etc.
  40  */
  41
  42 static inline void lock_cmos(unsigned char reg)
  43 {
  44         unsigned long new;
  45         new = ((smp_processor_id()+1) << 8) | reg;
  46         for (;;) {
  47                 if (cmos_lock) {
  48                         cpu_relax();
  49                         continue;
  50                 }
  51                 if (__cmpxchg(&cmos_lock, 0, new, sizeof(cmos_lock)) == 0)
  52                         return;
  53         }
  54 }
  55
  56 static inline void unlock_cmos(void)
  57 {
  58         cmos_lock = 0;
  59 }
  60 static inline int do_i_have_lock_cmos(void)
  61 {
  62         return (cmos_lock >> 8) == (smp_processor_id()+1);
  63 }
  64 static inline unsigned char current_lock_cmos_reg(void)
  65 {
  66         return cmos_lock & 0xff;
  67 }
  68 #define lock_cmos_prefix(reg) \
  69         do {                                    \
  70                 unsigned long cmos_flags;       \
  71                 local_irq_save(cmos_flags);     \
  72                 lock_cmos(reg)
  73 #define lock_cmos_suffix(reg) \
  74                 unlock_cmos();                  \
  75                 local_irq_restore(cmos_flags);  \
  76         } while (0)
  77 #else
  78 #define lock_cmos_prefix(reg) do {} while (0)
  79 #define lock_cmos_suffix(reg) do {} while (0)
  80 #define lock_cmos(reg)
  81 #define unlock_cmos()
  82 #define do_i_have_lock_cmos() 0
  83 #define current_lock_cmos_reg() 0
  84 #endif
  85
  86 /*
  87  * The yet supported machines all access the RTC index register via
  88  * an ISA port access but the way to access the date register differs ...
  89  */
  90 #define CMOS_READ(addr) rtc_cmos_read(addr)
  91 #define CMOS_WRITE(val, addr) rtc_cmos_write(val, addr)
  92 unsigned char rtc_cmos_read(unsigned char addr);
  93 void rtc_cmos_write(unsigned char val, unsigned char addr);
  94
  95 #define RTC_IRQ 8
  96
  97 #endif /* _ASM_MC146818RTC_H */