include/asm-x86/geode.h

   1 /*
   2  * AMD Geode definitions
   3  * Copyright (C) 2006, Advanced Micro Devices, Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of version 2 of the GNU General Public License
   7  * as published by the Free Software Foundation.
   8  */
   9
  10 #ifndef _ASM_GEODE_H_
  11 #define _ASM_GEODE_H_
  12
  13 #include <asm/processor.h>
  14 #include <linux/io.h>
  15
  16 /* Generic southbridge functions */
  17
  18 #define GEODE_DEV_PMS 0
  19 #define GEODE_DEV_ACPI 1
  20 #define GEODE_DEV_GPIO 2
  21 #define GEODE_DEV_MFGPT 3
  22
  23 extern int geode_get_dev_base(unsigned int dev);
  24
  25 /* Useful macros */
  26 #define geode_pms_base()        geode_get_dev_base(GEODE_DEV_PMS)
  27 #define geode_acpi_base()       geode_get_dev_base(GEODE_DEV_ACPI)
  28 #define geode_gpio_base()       geode_get_dev_base(GEODE_DEV_GPIO)
  29 #define geode_mfgpt_base()      geode_get_dev_base(GEODE_DEV_MFGPT)
  30
  31 /* MSRS */
  32
  33 #define GX_GLCP_SYS_RSTPLL      0x4C000014
  34
  35 #define MSR_LBAR_SMB            0x5140000B
  36 #define MSR_LBAR_GPIO           0x5140000C
  37 #define MSR_LBAR_MFGPT          0x5140000D
  38 #define MSR_LBAR_ACPI           0x5140000E
  39 #define MSR_LBAR_PMS            0x5140000F
  40
  41 #define MSR_PIC_YSEL_LOW        0x51400020
  42 #define MSR_PIC_YSEL_HIGH       0x51400021
  43 #define MSR_PIC_ZSEL_LOW        0x51400022
  44 #define MSR_PIC_ZSEL_HIGH       0x51400023
  45
  46 #define MFGPT_IRQ_MSR           0x51400028
  47 #define MFGPT_NR_MSR            0x51400029
  48
  49 /* Resource Sizes */
  50
  51 #define LBAR_GPIO_SIZE          0xFF
  52 #define LBAR_MFGPT_SIZE         0x40
  53 #define LBAR_ACPI_SIZE          0x40
  54 #define LBAR_PMS_SIZE           0x80
  55
  56 /* ACPI registers (PMS block) */
  57
  58 /*
  59  * PM1_EN is only valid when VSA is enabled for 16 bit reads.
  60  * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
  61  * with a 32 bit read at offset 0x0
  62  */
  63
  64 #define PM1_STS                 0x00
  65 #define PM1_EN                  0x02
  66 #define PM1_CNT                 0x08
  67 #define PM2_CNT                 0x0C
  68 #define PM_TMR                  0x10
  69 #define PM_GPE0_STS             0x18
  70 #define PM_GPE0_EN              0x1C
  71
  72 /* PMC registers (PMS block) */
  73
  74 #define PM_SSD                  0x00
  75 #define PM_SCXA                 0x04
  76 #define PM_SCYA                 0x08
  77 #define PM_OUT_SLPCTL           0x0C
  78 #define PM_SCLK                 0x10
  79 #define PM_SED                  0x1
  80 #define PM_SCXD                 0x18
  81 #define PM_SCYD                 0x1C
  82 #define PM_IN_SLPCTL            0x20
  83 #define PM_WKD                  0x30
  84 #define PM_WKXD                 0x34
  85 #define PM_RD                   0x38
  86 #define PM_WKXA                 0x3C
  87 #define PM_FSD                  0x40
  88 #define PM_TSD                  0x44
  89 #define PM_PSD                  0x48
  90 #define PM_NWKD                 0x4C
  91 #define PM_AWKD                 0x50
  92 #define PM_SSC                  0x54
  93
  94 /* GPIO */
  95
  96 #define GPIO_OUTPUT_VAL         0x00
  97 #define GPIO_OUTPUT_ENABLE      0x04
  98 #define GPIO_OUTPUT_OPEN_DRAIN  0x08
  99 #define GPIO_OUTPUT_INVERT      0x0C
 100 #define GPIO_OUTPUT_AUX1        0x10
 101 #define GPIO_OUTPUT_AUX2        0x14
 102 #define GPIO_PULL_UP            0x18
 103 #define GPIO_PULL_DOWN          0x1C
 104 #define GPIO_INPUT_ENABLE       0x20
 105 #define GPIO_INPUT_INVERT       0x24
 106 #define GPIO_INPUT_FILTER       0x28
 107 #define GPIO_INPUT_EVENT_COUNT  0x2C
 108 #define GPIO_READ_BACK          0x30
 109 #define GPIO_INPUT_AUX1         0x34
 110 #define GPIO_EVENTS_ENABLE      0x38
 111 #define GPIO_LOCK_ENABLE        0x3C
 112 #define GPIO_POSITIVE_EDGE_EN   0x40
 113 #define GPIO_NEGATIVE_EDGE_EN   0x44
 114 #define GPIO_POSITIVE_EDGE_STS  0x48
 115 #define GPIO_NEGATIVE_EDGE_STS  0x4C
 116
 117 #define GPIO_MAP_X              0xE0
 118 #define GPIO_MAP_Y              0xE4
 119 #define GPIO_MAP_Z              0xE8
 120 #define GPIO_MAP_W              0xEC
 121
 122 extern void geode_gpio_set(unsigned int, unsigned int);
 123 extern void geode_gpio_clear(unsigned int, unsigned int);
 124 extern int geode_gpio_isset(unsigned int, unsigned int);
 125 extern void geode_gpio_setup_event(unsigned int, int, int);
 126 extern void geode_gpio_set_irq(unsigned int, unsigned int);
 127
 128 static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
 129 {
 130         geode_gpio_setup_event(gpio, pair, 0);
 131 }
 132
 133 static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
 134 {
 135         geode_gpio_setup_event(gpio, pair, 1);
 136 }
 137
 138 /* Specific geode tests */
 139
 140 static inline int is_geode_gx(void)
 141 {
 142         return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
 143                 (boot_cpu_data.x86 == 5) &&
 144                 (boot_cpu_data.x86_model == 5));
 145 }
 146
 147 static inline int is_geode_lx(void)
 148 {
 149         return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
 150                 (boot_cpu_data.x86 == 5) &&
 151                 (boot_cpu_data.x86_model == 10));
 152 }
 153
 154 static inline int is_geode(void)
 155 {
 156         return (is_geode_gx() || is_geode_lx());
 157 }
 158
 159 #endif