?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mac80211: check return value of dev_alloc_skb() in ieee80211_sta_join_ibss().
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / cs89x0.c
blob65174d3b9026002d8cebed2bc812c54aa574a83b
1 /* cs89x0.c: A Crystal Semiconductor (Now Cirrus Logic) CS89[02]0
2 * driver for linux.
3 */
4
5 /*
6 Written 1996 by Russell Nelson, with reference to skeleton.c
7 written 1993-1994 by Donald Becker.
8
9 This software may be used and distributed according to the terms
10 of the GNU General Public License, incorporated herein by reference.
11
12 The author may be reached at nelson@crynwr.com, Crynwr
13 Software, 521 Pleasant Valley Rd., Potsdam, NY 13676
14
15 Changelog:
16
17 Mike Cruse : mcruse@cti-ltd.com
18 : Changes for Linux 2.0 compatibility.
19 : Added dev_id parameter in net_interrupt(),
20 : request_irq() and free_irq(). Just NULL for now.
21
22 Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
23 : in net_open() and net_close() so kerneld would know
24 : that the module is in use and wouldn't eject the
25 : driver prematurely.
26
27 Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
28 : as an example. Disabled autoprobing in init_module(),
29 : not a good thing to do to other devices while Linux
30 : is running from all accounts.
31
32 Russ Nelson : Jul 13 1998. Added RxOnly DMA support.
33
34 Melody Lee : Aug 10 1999. Changes for Linux 2.2.5 compatibility.
35 : email: ethernet@crystal.cirrus.com
36
37 Alan Cox : Removed 1.2 support, added 2.1 extra counters.
38
39 Andrew Morton : Kernel 2.3.48
40 : Handle kmalloc() failures
41 : Other resource allocation fixes
42 : Add SMP locks
43 : Integrate Russ Nelson's ALLOW_DMA functionality back in.
44 : If ALLOW_DMA is true, make DMA runtime selectable
45 : Folded in changes from Cirrus (Melody Lee
46 : <klee@crystal.cirrus.com>)
47 : Don't call netif_wake_queue() in net_send_packet()
48 : Fixed an out-of-mem bug in dma_rx()
49 : Updated Documentation/networking/cs89x0.txt
50
51 Andrew Morton : Kernel 2.3.99-pre1
52 : Use skb_reserve to longword align IP header (two places)
53 : Remove a delay loop from dma_rx()
54 : Replace '100' with HZ
55 : Clean up a couple of skb API abuses
56 : Added 'cs89x0_dma=N' kernel boot option
57 : Correctly initialise lp->lock in non-module compile
58
59 Andrew Morton : Kernel 2.3.99-pre4-1
60 : MOD_INC/DEC race fix (see
61 : http://www.uwsg.indiana.edu/hypermail/linux/kernel/0003.3/1532.html)
62
63 Andrew Morton : Kernel 2.4.0-test7-pre2
64 : Enhanced EEPROM support to cover more devices,
65 : abstracted IRQ mapping to support CONFIG_ARCH_CLPS7500 arch
66 : (Jason Gunthorpe <jgg@ualberta.ca>)
67
68 Andrew Morton : Kernel 2.4.0-test11-pre4
69 : Use dev->name in request_*() (Andrey Panin)
70 : Fix an error-path memleak in init_module()
71 : Preserve return value from request_irq()
72 : Fix type of `media' module parm (Keith Owens)
73 : Use SET_MODULE_OWNER()
74 : Tidied up strange request_irq() abuse in net_open().
75
76 Andrew Morton : Kernel 2.4.3-pre1
77 : Request correct number of pages for DMA (Hugh Dickens)
78 : Select PP_ChipID _after_ unregister_netdev in cleanup_module()
79 : because unregister_netdev() calls get_stats.
80 : Make `version[]' __initdata
81 : Uninlined the read/write reg/word functions.
82
83 Oskar Schirmer : oskar@scara.com
84 : HiCO.SH4 (superh) support added (irq#1, cs89x0_media=)
85
86 Deepak Saxena : dsaxena@plexity.net
87 : Intel IXDP2x01 (XScale ixp2x00 NPU) platform support
88
89 Dmitry Pervushin : dpervushin@ru.mvista.com
90 : PNX010X platform support
91
92 Deepak Saxena : dsaxena@plexity.net
93 : Intel IXDP2351 platform support
94
95 Dmitry Pervushin : dpervushin@ru.mvista.com
96 : PNX010X platform support
97
98 */
99
100 /* Always include 'config.h' first in case the user wants to turn on
101 or override something. */
102 #include <linux/module.h>
103
104 /*
105 * Set this to zero to disable DMA code
106 *
107 * Note that even if DMA is turned off we still support the 'dma' and 'use_dma'
108 * module options so we don't break any startup scripts.
109 */
110 #ifndef CONFIG_ISA_DMA_API
111 #define ALLOW_DMA 0
112 #else
113 #define ALLOW_DMA 1
114 #endif
115
116 /*
117 * Set this to zero to remove all the debug statements via
118 * dead code elimination
119 */
120 #define DEBUGGING 1
121
122 /*
123 Sources:
124
125 Crynwr packet driver epktisa.
126
127 Crystal Semiconductor data sheets.
128
129 */
130
131 #include <linux/errno.h>
132 #include <linux/netdevice.h>
133 #include <linux/etherdevice.h>
134 #include <linux/kernel.h>
135 #include <linux/types.h>
136 #include <linux/fcntl.h>
137 #include <linux/interrupt.h>
138 #include <linux/ioport.h>
139 #include <linux/in.h>
140 #include <linux/skbuff.h>
141 #include <linux/slab.h>
142 #include <linux/spinlock.h>
143 #include <linux/string.h>
144 #include <linux/init.h>
145 #include <linux/bitops.h>
146 #include <linux/delay.h>
147
148 #include <asm/system.h>
149 #include <asm/io.h>
150 #include <asm/irq.h>
151 #if ALLOW_DMA
152 #include <asm/dma.h>
153 #endif
154
155 #include "cs89x0.h"
156
157 static char version[] __initdata =
158 "cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
159
160 #define DRV_NAME "cs89x0"
161
162 /* First, a few definitions that the brave might change.
163 A zero-terminated list of I/O addresses to be probed. Some special flags..
164 Addr & 1 = Read back the address port, look for signature and reset
165 the page window before probing
166 Addr & 3 = Reset the page window and probe
167 The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space,
168 but it is possible that a Cirrus board could be plugged into the ISA
169 slots. */
170 /* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps
171 them to system IRQ numbers. This mapping is card specific and is set to
172 the configuration of the Cirrus Eval board for this chip. */
173 #ifdef CONFIG_ARCH_CLPS7500
174 static unsigned int netcard_portlist[] __used __initdata =
175 { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
176 static unsigned int cs8900_irq_map[] = {12,0,0,0};
177 #elif defined(CONFIG_SH_HICOSH4)
178 static unsigned int netcard_portlist[] __used __initdata =
179 { 0x0300, 0};
180 static unsigned int cs8900_irq_map[] = {1,0,0,0};
181 #elif defined(CONFIG_MACH_IXDP2351)
182 static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
183 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
184 #include <asm/irq.h>
185 #elif defined(CONFIG_ARCH_IXDP2X01)
186 #include <asm/irq.h>
187 static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
188 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
189 #elif defined(CONFIG_ARCH_PNX010X)
190 #include <asm/irq.h>
191 #include <mach/gpio.h>
192 #define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
193 #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
194 static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
195 static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
196 #elif defined(CONFIG_MACH_MX31ADS)
197 #include <mach/board-mx31ads.h>
198 static unsigned int netcard_portlist[] __used __initdata = {
199 PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0
200 };
201 static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0};
202 #else
203 static unsigned int netcard_portlist[] __used __initdata =
204 { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
205 static unsigned int cs8900_irq_map[] = {10,11,12,5};
206 #endif
207
208 #if DEBUGGING
209 static unsigned int net_debug = DEBUGGING;
210 #else
211 #define net_debug 0 /* gcc will remove all the debug code for us */
212 #endif
213
214 /* The number of low I/O ports used by the ethercard. */
215 #define NETCARD_IO_EXTENT 16
216
217 /* we allow the user to override various values normally set in the EEPROM */
218 #define FORCE_RJ45 0x0001 /* pick one of these three */
219 #define FORCE_AUI 0x0002
220 #define FORCE_BNC 0x0004
221
222 #define FORCE_AUTO 0x0010 /* pick one of these three */
223 #define FORCE_HALF 0x0020
224 #define FORCE_FULL 0x0030
225
226 /* Information that need to be kept for each board. */
227 struct net_local {
228 struct net_device_stats stats;
229 int chip_type; /* one of: CS8900, CS8920, CS8920M */
230 char chip_revision; /* revision letter of the chip ('A'...) */
231 int send_cmd; /* the proper send command: TX_NOW, TX_AFTER_381, or TX_AFTER_ALL */
232 int auto_neg_cnf; /* auto-negotiation word from EEPROM */
233 int adapter_cnf; /* adapter configuration from EEPROM */
234 int isa_config; /* ISA configuration from EEPROM */
235 int irq_map; /* IRQ map from EEPROM */
236 int rx_mode; /* what mode are we in? 0, RX_MULTCAST_ACCEPT, or RX_ALL_ACCEPT */
237 int curr_rx_cfg; /* a copy of PP_RxCFG */
238 int linectl; /* either 0 or LOW_RX_SQUELCH, depending on configuration. */
239 int send_underrun; /* keep track of how many underruns in a row we get */
240 int force; /* force various values; see FORCE* above. */
241 spinlock_t lock;
242 #if ALLOW_DMA
243 int use_dma; /* Flag: we're using dma */
244 int dma; /* DMA channel */
245 int dmasize; /* 16 or 64 */
246 unsigned char *dma_buff; /* points to the beginning of the buffer */
247 unsigned char *end_dma_buff; /* points to the end of the buffer */
248 unsigned char *rx_dma_ptr; /* points to the next packet */
249 #endif
250 };
251
252 /* Index to functions, as function prototypes. */
253
254 static int cs89x0_probe1(struct net_device *dev, int ioaddr, int modular);
255 static int net_open(struct net_device *dev);
256 static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
257 static irqreturn_t net_interrupt(int irq, void *dev_id);
258 static void set_multicast_list(struct net_device *dev);
259 static void net_timeout(struct net_device *dev);
260 static void net_rx(struct net_device *dev);
261 static int net_close(struct net_device *dev);
262 static struct net_device_stats *net_get_stats(struct net_device *dev);
263 static void reset_chip(struct net_device *dev);
264 static int get_eeprom_data(struct net_device *dev, int off, int len, int *buffer);
265 static int get_eeprom_cksum(int off, int len, int *buffer);
266 static int set_mac_address(struct net_device *dev, void *addr);
267 static void count_rx_errors(int status, struct net_local *lp);
268 #ifdef CONFIG_NET_POLL_CONTROLLER
269 static void net_poll_controller(struct net_device *dev);
270 #endif
271 #if ALLOW_DMA
272 static void get_dma_channel(struct net_device *dev);
273 static void release_dma_buff(struct net_local *lp);
274 #endif
275
276 /* Example routines you must write ;->. */
277 #define tx_done(dev) 1
278
279 /*
280 * Permit 'cs89x0_dma=N' in the kernel boot environment
281 */
282 #if !defined(MODULE) && (ALLOW_DMA != 0)
283 static int g_cs89x0_dma;
284
285 static int __init dma_fn(char *str)
286 {
287 g_cs89x0_dma = simple_strtol(str,NULL,0);
288 return 1;
289 }
290
291 __setup("cs89x0_dma=", dma_fn);
292 #endif /* !defined(MODULE) && (ALLOW_DMA != 0) */
293
294 #ifndef MODULE
295 static int g_cs89x0_media__force;
296
297 static int __init media_fn(char *str)
298 {
299 if (!strcmp(str, "rj45")) g_cs89x0_media__force = FORCE_RJ45;
300 else if (!strcmp(str, "aui")) g_cs89x0_media__force = FORCE_AUI;
301 else if (!strcmp(str, "bnc")) g_cs89x0_media__force = FORCE_BNC;
302 return 1;
303 }
304
305 __setup("cs89x0_media=", media_fn);
306
307
308 /* Check for a network adaptor of this type, and return '0' iff one exists.
309 If dev->base_addr == 0, probe all likely locations.
310 If dev->base_addr == 1, always return failure.
311 If dev->base_addr == 2, allocate space for the device and return success
312 (detachable devices only).
313 Return 0 on success.
314 */
315
316 struct net_device * __init cs89x0_probe(int unit)
317 {
318 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
319 unsigned *port;
320 int err = 0;
321 int irq;
322 int io;
323
324 if (!dev)
325 return ERR_PTR(-ENODEV);
326
327 sprintf(dev->name, "eth%d", unit);
328 netdev_boot_setup_check(dev);
329 io = dev->base_addr;
330 irq = dev->irq;
331
332 if (net_debug)
333 printk("cs89x0:cs89x0_probe(0x%x)\n", io);
334
335 if (io > 0x1ff) { /* Check a single specified location. */
336 err = cs89x0_probe1(dev, io, 0);
337 } else if (io != 0) { /* Don't probe at all. */
338 err = -ENXIO;
339 } else {
340 for (port = netcard_portlist; *port; port++) {
341 if (cs89x0_probe1(dev, *port, 0) == 0)
342 break;
343 dev->irq = irq;
344 }
345 if (!*port)
346 err = -ENODEV;
347 }
348 if (err)
349 goto out;
350 return dev;
351 out:
352 free_netdev(dev);
353 printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
354 return ERR_PTR(err);
355 }
356 #endif
357
358 #if defined(CONFIG_MACH_IXDP2351)
359 static u16
360 readword(unsigned long base_addr, int portno)
361 {
362 return __raw_readw(base_addr + (portno << 1));
363 }
364
365 static void
366 writeword(unsigned long base_addr, int portno, u16 value)
367 {
368 __raw_writew(value, base_addr + (portno << 1));
369 }
370 #elif defined(CONFIG_ARCH_IXDP2X01)
371 static u16
372 readword(unsigned long base_addr, int portno)
373 {
374 return __raw_readl(base_addr + (portno << 1));
375 }
376
377 static void
378 writeword(unsigned long base_addr, int portno, u16 value)
379 {
380 __raw_writel(value, base_addr + (portno << 1));
381 }
382 #elif defined(CONFIG_ARCH_PNX010X)
383 static u16
384 readword(unsigned long base_addr, int portno)
385 {
386 return inw(base_addr + (portno << 1));
387 }
388
389 static void
390 writeword(unsigned long base_addr, int portno, u16 value)
391 {
392 outw(value, base_addr + (portno << 1));
393 }
394 #else
395 static u16
396 readword(unsigned long base_addr, int portno)
397 {
398 return inw(base_addr + portno);
399 }
400
401 static void
402 writeword(unsigned long base_addr, int portno, u16 value)
403 {
404 outw(value, base_addr + portno);
405 }
406 #endif
407
408 static void
409 readwords(unsigned long base_addr, int portno, void *buf, int length)
410 {
411 u8 *buf8 = (u8 *)buf;
412
413 do {
414 u16 tmp16;
415
416 tmp16 = readword(base_addr, portno);
417 *buf8++ = (u8)tmp16;
418 *buf8++ = (u8)(tmp16 >> 8);
419 } while (--length);
420 }
421
422 static void
423 writewords(unsigned long base_addr, int portno, void *buf, int length)
424 {
425 u8 *buf8 = (u8 *)buf;
426
427 do {
428 u16 tmp16;
429
430 tmp16 = *buf8++;
431 tmp16 |= (*buf8++) << 8;
432 writeword(base_addr, portno, tmp16);
433 } while (--length);
434 }
435
436 static u16
437 readreg(struct net_device *dev, u16 regno)
438 {
439 writeword(dev->base_addr, ADD_PORT, regno);
440 return readword(dev->base_addr, DATA_PORT);
441 }
442
443 static void
444 writereg(struct net_device *dev, u16 regno, u16 value)
445 {
446 writeword(dev->base_addr, ADD_PORT, regno);
447 writeword(dev->base_addr, DATA_PORT, value);
448 }
449
450 static int __init
451 wait_eeprom_ready(struct net_device *dev)
452 {
453 int timeout = jiffies;
454 /* check to see if the EEPROM is ready, a timeout is used -
455 just in case EEPROM is ready when SI_BUSY in the
456 PP_SelfST is clear */
457 while(readreg(dev, PP_SelfST) & SI_BUSY)
458 if (jiffies - timeout >= 40)
459 return -1;
460 return 0;
461 }
462
463 static int __init
464 get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
465 {
466 int i;
467
468 if (net_debug > 3) printk("EEPROM data from %x for %x:\n",off,len);
469 for (i = 0; i < len; i++) {
470 if (wait_eeprom_ready(dev) < 0) return -1;
471 /* Now send the EEPROM read command and EEPROM location to read */
472 writereg(dev, PP_EECMD, (off + i) | EEPROM_READ_CMD);
473 if (wait_eeprom_ready(dev) < 0) return -1;
474 buffer[i] = readreg(dev, PP_EEData);
475 if (net_debug > 3) printk("%04x ", buffer[i]);
476 }
477 if (net_debug > 3) printk("\n");
478 return 0;
479 }
480
481 static int __init
482 get_eeprom_cksum(int off, int len, int *buffer)
483 {
484 int i, cksum;
485
486 cksum = 0;
487 for (i = 0; i < len; i++)
488 cksum += buffer[i];
489 cksum &= 0xffff;
490 if (cksum == 0)
491 return 0;
492 return -1;
493 }
494
495 #ifdef CONFIG_NET_POLL_CONTROLLER
496 /*
497 * Polling receive - used by netconsole and other diagnostic tools
498 * to allow network i/o with interrupts disabled.
499 */
500 static void net_poll_controller(struct net_device *dev)
501 {
502 disable_irq(dev->irq);
503 net_interrupt(dev->irq, dev);
504 enable_irq(dev->irq);
505 }
506 #endif
507
508 /* This is the real probe routine. Linux has a history of friendly device
509 probes on the ISA bus. A good device probes avoids doing writes, and
510 verifies that the correct device exists and functions.
511 Return 0 on success.
512 */
513
514 static int __init
515 cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
516 {
517 struct net_local *lp = netdev_priv(dev);
518 static unsigned version_printed;
519 int i;
520 int tmp;
521 unsigned rev_type = 0;
522 int eeprom_buff[CHKSUM_LEN];
523 int retval;
524
525 /* Initialize the device structure. */
526 if (!modular) {
527 memset(lp, 0, sizeof(*lp));
528 spin_lock_init(&lp->lock);
529 #ifndef MODULE
530 #if ALLOW_DMA
531 if (g_cs89x0_dma) {
532 lp->use_dma = 1;
533 lp->dma = g_cs89x0_dma;
534 lp->dmasize = 16; /* Could make this an option... */
535 }
536 #endif
537 lp->force = g_cs89x0_media__force;
538 #endif
539 }
540
541 #ifdef CONFIG_ARCH_PNX010X
542 initialize_ebi();
543
544 /* Map GPIO registers for the pins connected to the CS8900a. */
545 if (map_cirrus_gpio() < 0)
546 return -ENODEV;
547
548 reset_cirrus();
549
550 /* Map event-router registers. */
551 if (map_event_router() < 0)
552 return -ENODEV;
553
554 enable_cirrus_irq();
555
556 unmap_cirrus_gpio();
557 unmap_event_router();
558
559 dev->base_addr = ioaddr;
560
561 for (i = 0 ; i < 3 ; i++)
562 readreg(dev, 0);
563 #endif
564
565 /* Grab the region so we can find another board if autoIRQ fails. */
566 /* WTF is going on here? */
567 if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
568 printk(KERN_ERR "%s: request_region(0x%x, 0x%x) failed\n",
569 DRV_NAME, ioaddr, NETCARD_IO_EXTENT);
570 retval = -EBUSY;
571 goto out1;
572 }
573
574 #ifdef CONFIG_SH_HICOSH4
575 /* truely reset the chip */
576 writeword(ioaddr, ADD_PORT, 0x0114);
577 writeword(ioaddr, DATA_PORT, 0x0040);
578 #endif
579
580 /* if they give us an odd I/O address, then do ONE write to
581 the address port, to get it back to address zero, where we
582 expect to find the EISA signature word. An IO with a base of 0x3
583 will skip the test for the ADD_PORT. */
584 if (ioaddr & 1) {
585 if (net_debug > 1)
586 printk(KERN_INFO "%s: odd ioaddr 0x%x\n", dev->name, ioaddr);
587 if ((ioaddr & 2) != 2)
588 if ((readword(ioaddr & ~3, ADD_PORT) & ADD_MASK) != ADD_SIG) {
589 printk(KERN_ERR "%s: bad signature 0x%x\n",
590 dev->name, readword(ioaddr & ~3, ADD_PORT));
591 retval = -ENODEV;
592 goto out2;
593 }
594 }
595
596 ioaddr &= ~3;
597 printk(KERN_DEBUG "PP_addr at %x[%x]: 0x%x\n",
598 ioaddr, ADD_PORT, readword(ioaddr, ADD_PORT));
599 writeword(ioaddr, ADD_PORT, PP_ChipID);
600
601 tmp = readword(ioaddr, DATA_PORT);
602 if (tmp != CHIP_EISA_ID_SIG) {
603 printk(KERN_DEBUG "%s: incorrect signature at %x[%x]: 0x%x!="
604 CHIP_EISA_ID_SIG_STR "\n",
605 dev->name, ioaddr, DATA_PORT, tmp);
606 retval = -ENODEV;
607 goto out2;
608 }
609
610 /* Fill in the 'dev' fields. */
611 dev->base_addr = ioaddr;
612
613 /* get the chip type */
614 rev_type = readreg(dev, PRODUCT_ID_ADD);
615 lp->chip_type = rev_type &~ REVISON_BITS;
616 lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
617
618 /* Check the chip type and revision in order to set the correct send command
619 CS8920 revision C and CS8900 revision F can use the faster send. */
620 lp->send_cmd = TX_AFTER_381;
621 if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
622 lp->send_cmd = TX_NOW;
623 if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
624 lp->send_cmd = TX_NOW;
625
626 if (net_debug && version_printed++ == 0)
627 printk(version);
628
629 printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#3lx ",
630 dev->name,
631 lp->chip_type==CS8900?'0':'2',
632 lp->chip_type==CS8920M?"M":"",
633 lp->chip_revision,
634 dev->base_addr);
635
636 reset_chip(dev);
637
638 /* Here we read the current configuration of the chip. If there
639 is no Extended EEPROM then the idea is to not disturb the chip
640 configuration, it should have been correctly setup by automatic
641 EEPROM read on reset. So, if the chip says it read the EEPROM
642 the driver will always do *something* instead of complain that
643 adapter_cnf is 0. */
644
645 #ifdef CONFIG_SH_HICOSH4
646 if (1) {
647 /* For the HiCO.SH4 board, things are different: we don't
648 have EEPROM, but there is some data in flash, so we go
649 get it there directly (MAC). */
650 __u16 *confd;
651 short cnt;
652 if (((* (volatile __u32 *) 0xa0013ff0) & 0x00ffffff)
653 == 0x006c3000) {
654 confd = (__u16*) 0xa0013fc0;
655 } else {
656 confd = (__u16*) 0xa001ffc0;
657 }
658 cnt = (*confd++ & 0x00ff) >> 1;
659 while (--cnt > 0) {
660 __u16 j = *confd++;
661
662 switch (j & 0x0fff) {
663 case PP_IA:
664 for (i = 0; i < ETH_ALEN/2; i++) {
665 dev->dev_addr[i*2] = confd[i] & 0xFF;
666 dev->dev_addr[i*2+1] = confd[i] >> 8;
667 }
668 break;
669 }
670 j = (j >> 12) + 1;
671 confd += j;
672 cnt -= j;
673 }
674 } else
675 #endif
676
677 if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
678 (EEPROM_OK|EEPROM_PRESENT)) {
679 /* Load the MAC. */
680 for (i=0; i < ETH_ALEN/2; i++) {
681 unsigned int Addr;
682 Addr = readreg(dev, PP_IA+i*2);
683 dev->dev_addr[i*2] = Addr & 0xFF;
684 dev->dev_addr[i*2+1] = Addr >> 8;
685 }
686
687 /* Load the Adapter Configuration.
688 Note: Barring any more specific information from some
689 other source (ie EEPROM+Schematics), we would not know
690 how to operate a 10Base2 interface on the AUI port.
691 However, since we do read the status of HCB1 and use
692 settings that always result in calls to control_dc_dc(dev,0)
693 a BNC interface should work if the enable pin
694 (dc/dc converter) is on HCB1. It will be called AUI
695 however. */
696
697 lp->adapter_cnf = 0;
698 i = readreg(dev, PP_LineCTL);
699 /* Preserve the setting of the HCB1 pin. */
700 if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL))
701 lp->adapter_cnf |= A_CNF_DC_DC_POLARITY;
702 /* Save the sqelch bit */
703 if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH)
704 lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH;
705 /* Check if the card is in 10Base-t only mode */
706 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0)
707 lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T;
708 /* Check if the card is in AUI only mode */
709 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY)
710 lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI;
711 /* Check if the card is in Auto mode. */
712 if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET)
713 lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T |
714 A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
715
716 if (net_debug > 1)
717 printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
718 dev->name, i, lp->adapter_cnf);
719
720 /* IRQ. Other chips already probe, see below. */
721 if (lp->chip_type == CS8900)
722 lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;
723
724 printk( "[Cirrus EEPROM] ");
725 }
726
727 printk("\n");
728
729 /* First check to see if an EEPROM is attached. */
730 #ifdef CONFIG_SH_HICOSH4 /* no EEPROM on HiCO, don't hazzle with it here */
731 if (1) {
732 printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n");
733 } else
734 #endif
735 if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
736 printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
737 else if (get_eeprom_data(dev, START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
738 printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n");
739 } else if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
740 /* Check if the chip was able to read its own configuration starting
741 at 0 in the EEPROM*/
742 if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
743 (EEPROM_OK|EEPROM_PRESENT))
744 printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
745
746 } else {
747 /* This reads an extended EEPROM that is not documented
748 in the CS8900 datasheet. */
749
750 /* get transmission control word but keep the autonegotiation bits */
751 if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
752 /* Store adapter configuration */
753 if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
754 /* Store ISA configuration */
755 lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2];
756 dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
757
758 /* eeprom_buff has 32-bit ints, so we can't just memcpy it */
759 /* store the initial memory base address */
760 for (i = 0; i < ETH_ALEN/2; i++) {
761 dev->dev_addr[i*2] = eeprom_buff[i];
762 dev->dev_addr[i*2+1] = eeprom_buff[i] >> 8;
763 }
764 if (net_debug > 1)
765 printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n",
766 dev->name, lp->adapter_cnf);
767 }
768
769 /* allow them to force multiple transceivers. If they force multiple, autosense */
770 {
771 int count = 0;
772 if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; }
773 if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; }
774 if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; }
775 if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; }
776 else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; }
777 else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; }
778 else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; }
779 }
780
781 if (net_debug > 1)
782 printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n",
783 dev->name, lp->force, lp->adapter_cnf);
784
785 /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
786
787 /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */
788
789 /* FIXME: we don't set the Ethernet address on the command line. Use
790 ifconfig IFACE hw ether AABBCCDDEEFF */
791
792 printk(KERN_INFO "cs89x0 media %s%s%s",
793 (lp->adapter_cnf & A_CNF_10B_T)?"RJ-45,":"",
794 (lp->adapter_cnf & A_CNF_AUI)?"AUI,":"",
795 (lp->adapter_cnf & A_CNF_10B_2)?"BNC,":"");
796
797 lp->irq_map = 0xffff;
798
799 /* If this is a CS8900 then no pnp soft */
800 if (lp->chip_type != CS8900 &&
801 /* Check if the ISA IRQ has been set */
802 (i = readreg(dev, PP_CS8920_ISAINT) & 0xff,
803 (i != 0 && i < CS8920_NO_INTS))) {
804 if (!dev->irq)
805 dev->irq = i;
806 } else {
807 i = lp->isa_config & INT_NO_MASK;
808 if (lp->chip_type == CS8900) {
809 #ifdef CONFIG_CS89x0_NONISA_IRQ
810 i = cs8900_irq_map[0];
811 #else
812 /* Translate the IRQ using the IRQ mapping table. */
813 if (i >= ARRAY_SIZE(cs8900_irq_map))
814 printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
815 else
816 i = cs8900_irq_map[i];
817
818 lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */
819 } else {
820 int irq_map_buff[IRQ_MAP_LEN/2];
821
822 if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA,
823 IRQ_MAP_LEN/2,
824 irq_map_buff) >= 0) {
825 if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
826 lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8);
827 }
828 #endif
829 }
830 if (!dev->irq)
831 dev->irq = i;
832 }
833
834 printk(" IRQ %d", dev->irq);
835
836 #if ALLOW_DMA
837 if (lp->use_dma) {
838 get_dma_channel(dev);
839 printk(", DMA %d", dev->dma);
840 }
841 else
842 #endif
843 {
844 printk(", programmed I/O");
845 }
846
847 /* print the ethernet address. */
848 printk(", MAC %pM", dev->dev_addr);
849
850 dev->open = net_open;
851 dev->stop = net_close;
852 dev->tx_timeout = net_timeout;
853 dev->watchdog_timeo = HZ;
854 dev->hard_start_xmit = net_send_packet;
855 dev->get_stats = net_get_stats;
856 dev->set_multicast_list = set_multicast_list;
857 dev->set_mac_address = set_mac_address;
858 #ifdef CONFIG_NET_POLL_CONTROLLER
859 dev->poll_controller = net_poll_controller;
860 #endif
861
862 printk("\n");
863 if (net_debug)
864 printk("cs89x0_probe1() successful\n");
865
866 retval = register_netdev(dev);
867 if (retval)
868 goto out3;
869 return 0;
870 out3:
871 writeword(dev->base_addr, ADD_PORT, PP_ChipID);
872 out2:
873 release_region(ioaddr & ~3, NETCARD_IO_EXTENT);
874 out1:
875 return retval;
876 }
877
878
879 /*********************************
880 * This page contains DMA routines
881 **********************************/
882
883 #if ALLOW_DMA
884
885 #define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17)
886
887 static void
888 get_dma_channel(struct net_device *dev)
889 {
890 struct net_local *lp = netdev_priv(dev);
891
892 if (lp->dma) {
893 dev->dma = lp->dma;
894 lp->isa_config |= ISA_RxDMA;
895 } else {
896 if ((lp->isa_config & ANY_ISA_DMA) == 0)
897 return;
898 dev->dma = lp->isa_config & DMA_NO_MASK;
899 if (lp->chip_type == CS8900)
900 dev->dma += 5;
901 if (dev->dma < 5 || dev->dma > 7) {
902 lp->isa_config &= ~ANY_ISA_DMA;
903 return;
904 }
905 }
906 return;
907 }
908
909 static void
910 write_dma(struct net_device *dev, int chip_type, int dma)
911 {
912 struct net_local *lp = netdev_priv(dev);
913 if ((lp->isa_config & ANY_ISA_DMA) == 0)
914 return;
915 if (chip_type == CS8900) {
916 writereg(dev, PP_CS8900_ISADMA, dma-5);
917 } else {
918 writereg(dev, PP_CS8920_ISADMA, dma);
919 }
920 }
921
922 static void
923 set_dma_cfg(struct net_device *dev)
924 {
925 struct net_local *lp = netdev_priv(dev);
926
927 if (lp->use_dma) {
928 if ((lp->isa_config & ANY_ISA_DMA) == 0) {
929 if (net_debug > 3)
930 printk("set_dma_cfg(): no DMA\n");
931 return;
932 }
933 if (lp->isa_config & ISA_RxDMA) {
934 lp->curr_rx_cfg |= RX_DMA_ONLY;
935 if (net_debug > 3)
936 printk("set_dma_cfg(): RX_DMA_ONLY\n");
937 } else {
938 lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */
939 if (net_debug > 3)
940 printk("set_dma_cfg(): AUTO_RX_DMA\n");
941 }
942 }
943 }
944
945 static int
946 dma_bufcfg(struct net_device *dev)
947 {
948 struct net_local *lp = netdev_priv(dev);
949 if (lp->use_dma)
950 return (lp->isa_config & ANY_ISA_DMA)? RX_DMA_ENBL : 0;
951 else
952 return 0;
953 }
954
955 static int
956 dma_busctl(struct net_device *dev)
957 {
958 int retval = 0;
959 struct net_local *lp = netdev_priv(dev);
960 if (lp->use_dma) {
961 if (lp->isa_config & ANY_ISA_DMA)
962 retval |= RESET_RX_DMA; /* Reset the DMA pointer */
963 if (lp->isa_config & DMA_BURST)
964 retval |= DMA_BURST_MODE; /* Does ISA config specify DMA burst ? */
965 if (lp->dmasize == 64)
966 retval |= RX_DMA_SIZE_64K; /* did they ask for 64K? */
967 retval |= MEMORY_ON; /* we need memory enabled to use DMA. */
968 }
969 return retval;
970 }
971
972 static void
973 dma_rx(struct net_device *dev)
974 {
975 struct net_local *lp = netdev_priv(dev);
976 struct sk_buff *skb;
977 int status, length;
978 unsigned char *bp = lp->rx_dma_ptr;
979
980 status = bp[0] + (bp[1]<<8);
981 length = bp[2] + (bp[3]<<8);
982 bp += 4;
983 if (net_debug > 5) {
984 printk( "%s: receiving DMA packet at %lx, status %x, length %x\n",
985 dev->name, (unsigned long)bp, status, length);
986 }
987 if ((status & RX_OK) == 0) {
988 count_rx_errors(status, lp);
989 goto skip_this_frame;
990 }
991
992 /* Malloc up new buffer. */
993 skb = dev_alloc_skb(length + 2);
994 if (skb == NULL) {
995 if (net_debug) /* I don't think we want to do this to a stressed system */
996 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
997 lp->stats.rx_dropped++;
998
999 /* AKPM: advance bp to the next frame */
1000 skip_this_frame:
1001 bp += (length + 3) & ~3;
1002 if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
1003 lp->rx_dma_ptr = bp;
1004 return;
1005 }
1006 skb_reserve(skb, 2); /* longword align L3 header */
1007
1008 if (bp + length > lp->end_dma_buff) {
1009 int semi_cnt = lp->end_dma_buff - bp;
1010 memcpy(skb_put(skb,semi_cnt), bp, semi_cnt);
1011 memcpy(skb_put(skb,length - semi_cnt), lp->dma_buff,
1012 length - semi_cnt);
1013 } else {
1014 memcpy(skb_put(skb,length), bp, length);
1015 }
1016 bp += (length + 3) & ~3;
1017 if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
1018 lp->rx_dma_ptr = bp;
1019
1020 if (net_debug > 3) {
1021 printk( "%s: received %d byte DMA packet of type %x\n",
1022 dev->name, length,
1023 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
1024 }
1025 skb->protocol=eth_type_trans(skb,dev);
1026 netif_rx(skb);
1027 dev->last_rx = jiffies;
1028 lp->stats.rx_packets++;
1029 lp->stats.rx_bytes += length;
1030 }
1031
1032 #endif /* ALLOW_DMA */
1033
1034 void __init reset_chip(struct net_device *dev)
1035 {
1036 #if !defined(CONFIG_MACH_MX31ADS)
1037 #if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
1038 struct net_local *lp = netdev_priv(dev);
1039 int ioaddr = dev->base_addr;
1040 #endif
1041 int reset_start_time;
1042
1043 writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
1044
1045 /* wait 30 ms */
1046 msleep(30);
1047
1048 #if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01)
1049 if (lp->chip_type != CS8900) {
1050 /* Hardware problem requires PNP registers to be reconfigured after a reset */
1051 writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT);
1052 outb(dev->irq, ioaddr + DATA_PORT);
1053 outb(0, ioaddr + DATA_PORT + 1);
1054
1055 writeword(ioaddr, ADD_PORT, PP_CS8920_ISAMemB);
1056 outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT);
1057 outb((dev->mem_start >> 8) & 0xff, ioaddr + DATA_PORT + 1);
1058 }
1059 #endif /* IXDP2x01 */
1060
1061 /* Wait until the chip is reset */
1062 reset_start_time = jiffies;
1063 while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
1064 ;
1065 #endif /* !CONFIG_MACH_MX31ADS */
1066 }
1067
1068
1069 static void
1070 control_dc_dc(struct net_device *dev, int on_not_off)
1071 {
1072 struct net_local *lp = netdev_priv(dev);
1073 unsigned int selfcontrol;
1074 int timenow = jiffies;
1075 /* control the DC to DC convertor in the SelfControl register.
1076 Note: This is hooked up to a general purpose pin, might not
1077 always be a DC to DC convertor. */
1078
1079 selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
1080 if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
1081 selfcontrol |= HCB1;
1082 else
1083 selfcontrol &= ~HCB1;
1084 writereg(dev, PP_SelfCTL, selfcontrol);
1085
1086 /* Wait for the DC/DC converter to power up - 500ms */
1087 while (jiffies - timenow < HZ)
1088 ;
1089 }
1090
1091 #define DETECTED_NONE 0
1092 #define DETECTED_RJ45H 1
1093 #define DETECTED_RJ45F 2
1094 #define DETECTED_AUI 3
1095 #define DETECTED_BNC 4
1096
1097 static int
1098 detect_tp(struct net_device *dev)
1099 {
1100 struct net_local *lp = netdev_priv(dev);
1101 int timenow = jiffies;
1102 int fdx;
1103
1104 if (net_debug > 1) printk("%s: Attempting TP\n", dev->name);
1105
1106 /* If connected to another full duplex capable 10-Base-T card the link pulses
1107 seem to be lost when the auto detect bit in the LineCTL is set.
1108 To overcome this the auto detect bit will be cleared whilst testing the
1109 10-Base-T interface. This would not be necessary for the sparrow chip but
1110 is simpler to do it anyway. */
1111 writereg(dev, PP_LineCTL, lp->linectl &~ AUI_ONLY);
1112 control_dc_dc(dev, 0);
1113
1114 /* Delay for the hardware to work out if the TP cable is present - 150ms */
1115 for (timenow = jiffies; jiffies - timenow < 15; )
1116 ;
1117 if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
1118 return DETECTED_NONE;
1119
1120 if (lp->chip_type == CS8900) {
1121 switch (lp->force & 0xf0) {
1122 #if 0
1123 case FORCE_AUTO:
1124 printk("%s: cs8900 doesn't autonegotiate\n",dev->name);
1125 return DETECTED_NONE;
1126 #endif
1127 /* CS8900 doesn't support AUTO, change to HALF*/
1128 case FORCE_AUTO:
1129 lp->force &= ~FORCE_AUTO;
1130 lp->force |= FORCE_HALF;
1131 break;
1132 case FORCE_HALF:
1133 break;
1134 case FORCE_FULL:
1135 writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900);
1136 break;
1137 }
1138 fdx = readreg(dev, PP_TestCTL) & FDX_8900;
1139 } else {
1140 switch (lp->force & 0xf0) {
1141 case FORCE_AUTO:
1142 lp->auto_neg_cnf = AUTO_NEG_ENABLE;
1143 break;
1144 case FORCE_HALF:
1145 lp->auto_neg_cnf = 0;
1146 break;
1147 case FORCE_FULL:
1148 lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX;
1149 break;
1150 }
1151
1152 writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
1153
1154 if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
1155 printk(KERN_INFO "%s: negotiating duplex...\n",dev->name);
1156 while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
1157 if (jiffies - timenow > 4000) {
1158 printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n");
1159 break;
1160 }
1161 }
1162 }
1163 fdx = readreg(dev, PP_AutoNegST) & FDX_ACTIVE;
1164 }
1165 if (fdx)
1166 return DETECTED_RJ45F;
1167 else
1168 return DETECTED_RJ45H;
1169 }
1170
1171 /* send a test packet - return true if carrier bits are ok */
1172 static int
1173 send_test_pkt(struct net_device *dev)
1174 {
1175 char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
1176 0, 46, /* A 46 in network order */
1177 0, 0, /* DSAP=0 & SSAP=0 fields */
1178 0xf3, 0 /* Control (Test Req + P bit set) */ };
1179 long timenow = jiffies;
1180
1181 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
1182
1183 memcpy(test_packet, dev->dev_addr, ETH_ALEN);
1184 memcpy(test_packet+ETH_ALEN, dev->dev_addr, ETH_ALEN);
1185
1186 writeword(dev->base_addr, TX_CMD_PORT, TX_AFTER_ALL);
1187 writeword(dev->base_addr, TX_LEN_PORT, ETH_ZLEN);
1188
1189 /* Test to see if the chip has allocated memory for the packet */
1190 while (jiffies - timenow < 5)
1191 if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW)
1192 break;
1193 if (jiffies - timenow >= 5)
1194 return 0; /* this shouldn't happen */
1195
1196 /* Write the contents of the packet */
1197 writewords(dev->base_addr, TX_FRAME_PORT,test_packet,(ETH_ZLEN+1) >>1);
1198
1199 if (net_debug > 1) printk("Sending test packet ");
1200 /* wait a couple of jiffies for packet to be received */
1201 for (timenow = jiffies; jiffies - timenow < 3; )
1202 ;
1203 if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
1204 if (net_debug > 1) printk("succeeded\n");
1205 return 1;
1206 }
1207 if (net_debug > 1) printk("failed\n");
1208 return 0;
1209 }
1210
1211
1212 static int
1213 detect_aui(struct net_device *dev)
1214 {
1215 struct net_local *lp = netdev_priv(dev);
1216
1217 if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name);
1218 control_dc_dc(dev, 0);
1219
1220 writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
1221
1222 if (send_test_pkt(dev))
1223 return DETECTED_AUI;
1224 else
1225 return DETECTED_NONE;
1226 }
1227
1228 static int
1229 detect_bnc(struct net_device *dev)
1230 {
1231 struct net_local *lp = netdev_priv(dev);
1232
1233 if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name);
1234 control_dc_dc(dev, 1);
1235
1236 writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
1237
1238 if (send_test_pkt(dev))
1239 return DETECTED_BNC;
1240 else
1241 return DETECTED_NONE;
1242 }
1243
1244
1245 static void
1246 write_irq(struct net_device *dev, int chip_type, int irq)
1247 {
1248 int i;
1249
1250 if (chip_type == CS8900) {
1251 /* Search the mapping table for the corresponding IRQ pin. */
1252 for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
1253 if (cs8900_irq_map[i] == irq)
1254 break;
1255 /* Not found */
1256 if (i == ARRAY_SIZE(cs8900_irq_map))
1257 i = 3;
1258 writereg(dev, PP_CS8900_ISAINT, i);
1259 } else {
1260 writereg(dev, PP_CS8920_ISAINT, irq);
1261 }
1262 }
1263
1264 /* Open/initialize the board. This is called (in the current kernel)
1265 sometime after booting when the 'ifconfig' program is run.
1266
1267 This routine should set everything up anew at each open, even
1268 registers that "should" only need to be set once at boot, so that
1269 there is non-reboot way to recover if something goes wrong.
1270 */
1271
1272 /* AKPM: do we need to do any locking here? */
1273
1274 static int
1275 net_open(struct net_device *dev)
1276 {
1277 struct net_local *lp = netdev_priv(dev);
1278 int result = 0;
1279 int i;
1280 int ret;
1281
1282 #if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX010X) /* uses irq#1, so this won't work */
1283 if (dev->irq < 2) {
1284 /* Allow interrupts to be generated by the chip */
1285 /* Cirrus' release had this: */
1286 #if 0
1287 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
1288 #endif
1289 /* And 2.3.47 had this: */
1290 writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
1291
1292 for (i = 2; i < CS8920_NO_INTS; i++) {
1293 if ((1 << i) & lp->irq_map) {
1294 if (request_irq(i, net_interrupt, 0, dev->name, dev) == 0) {
1295 dev->irq = i;
1296 write_irq(dev, lp->chip_type, i);
1297 /* writereg(dev, PP_BufCFG, GENERATE_SW_INTERRUPT); */
1298 break;
1299 }
1300 }
1301 }
1302
1303 if (i >= CS8920_NO_INTS) {
1304 writereg(dev, PP_BusCTL, 0); /* disable interrupts. */
1305 printk(KERN_ERR "cs89x0: can't get an interrupt\n");
1306 ret = -EAGAIN;
1307 goto bad_out;
1308 }
1309 }
1310 else
1311 #endif
1312 {
1313 #ifndef CONFIG_CS89x0_NONISA_IRQ
1314 if (((1 << dev->irq) & lp->irq_map) == 0) {
1315 printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
1316 dev->name, dev->irq, lp->irq_map);
1317 ret = -EAGAIN;
1318 goto bad_out;
1319 }
1320 #endif
1321 /* FIXME: Cirrus' release had this: */
1322 writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
1323 /* And 2.3.47 had this: */
1324 #if 0
1325 writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
1326 #endif
1327 write_irq(dev, lp->chip_type, dev->irq);
1328 ret = request_irq(dev->irq, &net_interrupt, 0, dev->name, dev);
1329 if (ret) {
1330 if (net_debug)
1331 printk(KERN_DEBUG "cs89x0: request_irq(%d) failed\n", dev->irq);
1332 goto bad_out;
1333 }
1334 }
1335
1336 #if ALLOW_DMA
1337 if (lp->use_dma) {
1338 if (lp->isa_config & ANY_ISA_DMA) {
1339 unsigned long flags;
1340 lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
1341 get_order(lp->dmasize * 1024));
1342
1343 if (!lp->dma_buff) {
1344 printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize);
1345 goto release_irq;
1346 }
1347 if (net_debug > 1) {
1348 printk( "%s: dma %lx %lx\n",
1349 dev->name,
1350 (unsigned long)lp->dma_buff,
1351 (unsigned long)isa_virt_to_bus(lp->dma_buff));
1352 }
1353 if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
1354 !dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
1355 printk(KERN_ERR "%s: not usable as DMA buffer\n", dev->name);
1356 goto release_irq;
1357 }
1358 memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
1359 if (request_dma(dev->dma, dev->name)) {
1360 printk(KERN_ERR "%s: cannot get dma channel %d\n", dev->name, dev->dma);
1361 goto release_irq;
1362 }
1363 write_dma(dev, lp->chip_type, dev->dma);
1364 lp->rx_dma_ptr = lp->dma_buff;
1365 lp->end_dma_buff = lp->dma_buff + lp->dmasize*1024;
1366 spin_lock_irqsave(&lp->lock, flags);
1367 disable_dma(dev->dma);
1368 clear_dma_ff(dev->dma);
1369 set_dma_mode(dev->dma, 0x14); /* auto_init as well */
1370 set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
1371 set_dma_count(dev->dma, lp->dmasize*1024);
1372 enable_dma(dev->dma);
1373 spin_unlock_irqrestore(&lp->lock, flags);
1374 }
1375 }
1376 #endif /* ALLOW_DMA */
1377
1378 /* set the Ethernet address */
1379 for (i=0; i < ETH_ALEN/2; i++)
1380 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
1381
1382 /* while we're testing the interface, leave interrupts disabled */
1383 writereg(dev, PP_BusCTL, MEMORY_ON);
1384
1385 /* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */
1386 if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
1387 lp->linectl = LOW_RX_SQUELCH;
1388 else
1389 lp->linectl = 0;
1390
1391 /* check to make sure that they have the "right" hardware available */
1392 switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
1393 case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break;
1394 case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break;
1395 case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
1396 default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
1397 }
1398 #ifdef CONFIG_ARCH_PNX010X
1399 result = A_CNF_10B_T;
1400 #endif
1401 if (!result) {
1402 printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
1403 release_dma:
1404 #if ALLOW_DMA
1405 free_dma(dev->dma);
1406 release_irq:
1407 release_dma_buff(lp);
1408 #endif
1409 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
1410 free_irq(dev->irq, dev);
1411 ret = -EAGAIN;
1412 goto bad_out;
1413 }
1414
1415 /* set the hardware to the configured choice */
1416 switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
1417 case A_CNF_MEDIA_10B_T:
1418 result = detect_tp(dev);
1419 if (result==DETECTED_NONE) {
1420 printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name);
1421 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1422 result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */
1423 }
1424 break;
1425 case A_CNF_MEDIA_AUI:
1426 result = detect_aui(dev);
1427 if (result==DETECTED_NONE) {
1428 printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name);
1429 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1430 result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */
1431 }
1432 break;
1433 case A_CNF_MEDIA_10B_2:
1434 result = detect_bnc(dev);
1435 if (result==DETECTED_NONE) {
1436 printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name);
1437 if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
1438 result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */
1439 }
1440 break;
1441 case A_CNF_MEDIA_AUTO:
1442 writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET);
1443 if (lp->adapter_cnf & A_CNF_10B_T)
1444 if ((result = detect_tp(dev)) != DETECTED_NONE)
1445 break;
1446 if (lp->adapter_cnf & A_CNF_AUI)
1447 if ((result = detect_aui(dev)) != DETECTED_NONE)
1448 break;
1449 if (lp->adapter_cnf & A_CNF_10B_2)
1450 if ((result = detect_bnc(dev)) != DETECTED_NONE)
1451 break;
1452 printk(KERN_ERR "%s: no media detected\n", dev->name);
1453 goto release_dma;
1454 }
1455 switch(result) {
1456 case DETECTED_NONE:
1457 printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
1458 goto release_dma;
1459 case DETECTED_RJ45H:
1460 printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
1461 break;
1462 case DETECTED_RJ45F:
1463 printk(KERN_INFO "%s: using full-duplex 10Base-T (RJ-45)\n", dev->name);
1464 break;
1465 case DETECTED_AUI:
1466 printk(KERN_INFO "%s: using 10Base-5 (AUI)\n", dev->name);
1467 break;
1468 case DETECTED_BNC:
1469 printk(KERN_INFO "%s: using 10Base-2 (BNC)\n", dev->name);
1470 break;
1471 }
1472
1473 /* Turn on both receive and transmit operations */
1474 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
1475
1476 /* Receive only error free packets addressed to this card */
1477 lp->rx_mode = 0;
1478 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
1479
1480 lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
1481
1482 if (lp->isa_config & STREAM_TRANSFER)
1483 lp->curr_rx_cfg |= RX_STREAM_ENBL;
1484 #if ALLOW_DMA
1485 set_dma_cfg(dev);
1486 #endif
1487 writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
1488
1489 writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
1490 TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
1491
1492 writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
1493 #if ALLOW_DMA
1494 dma_bufcfg(dev) |
1495 #endif
1496 TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
1497
1498 /* now that we've got our act together, enable everything */
1499 writereg(dev, PP_BusCTL, ENABLE_IRQ
1500 | (dev->mem_start?MEMORY_ON : 0) /* turn memory on */
1501 #if ALLOW_DMA
1502 | dma_busctl(dev)
1503 #endif
1504 );
1505 netif_start_queue(dev);
1506 if (net_debug > 1)
1507 printk("cs89x0: net_open() succeeded\n");
1508 return 0;
1509 bad_out:
1510 return ret;
1511 }
1512
1513 static void net_timeout(struct net_device *dev)
1514 {
1515 /* If we get here, some higher level has decided we are broken.
1516 There should really be a "kick me" function call instead. */
1517 if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
1518 tx_done(dev) ? "IRQ conflict ?" : "network cable problem");
1519 /* Try to restart the adaptor. */
1520 netif_wake_queue(dev);
1521 }
1522
1523 static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
1524 {
1525 struct net_local *lp = netdev_priv(dev);
1526
1527 if (net_debug > 3) {
1528 printk("%s: sent %d byte packet of type %x\n",
1529 dev->name, skb->len,
1530 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
1531 }
1532
1533 /* keep the upload from being interrupted, since we
1534 ask the chip to start transmitting before the
1535 whole packet has been completely uploaded. */
1536
1537 spin_lock_irq(&lp->lock);
1538 netif_stop_queue(dev);
1539
1540 /* initiate a transmit sequence */
1541 writeword(dev->base_addr, TX_CMD_PORT, lp->send_cmd);
1542 writeword(dev->base_addr, TX_LEN_PORT, skb->len);
1543
1544 /* Test to see if the chip has allocated memory for the packet */
1545 if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
1546 /*
1547 * Gasp! It hasn't. But that shouldn't happen since
1548 * we're waiting for TxOk, so return 1 and requeue this packet.
1549 */
1550
1551 spin_unlock_irq(&lp->lock);
1552 if (net_debug) printk("cs89x0: Tx buffer not free!\n");
1553 return 1;
1554 }
1555 /* Write the contents of the packet */
1556 writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
1557 spin_unlock_irq(&lp->lock);
1558 lp->stats.tx_bytes += skb->len;
1559 dev->trans_start = jiffies;
1560 dev_kfree_skb (skb);
1561
1562 /*
1563 * We DO NOT call netif_wake_queue() here.
1564 * We also DO NOT call netif_start_queue().
1565 *
1566 * Either of these would cause another bottom half run through
1567 * net_send_packet() before this packet has fully gone out. That causes
1568 * us to hit the "Gasp!" above and the send is rescheduled. it runs like
1569 * a dog. We just return and wait for the Tx completion interrupt handler
1570 * to restart the netdevice layer
1571 */
1572
1573 return 0;
1574 }
1575
1576 /* The typical workload of the driver:
1577 Handle the network interface interrupts. */
1578
1579 static irqreturn_t net_interrupt(int irq, void *dev_id)
1580 {
1581 struct net_device *dev = dev_id;
1582 struct net_local *lp;
1583 int ioaddr, status;
1584 int handled = 0;
1585
1586 ioaddr = dev->base_addr;
1587 lp = netdev_priv(dev);
1588
1589 /* we MUST read all the events out of the ISQ, otherwise we'll never
1590 get interrupted again. As a consequence, we can't have any limit
1591 on the number of times we loop in the interrupt handler. The
1592 hardware guarantees that eventually we'll run out of events. Of
1593 course, if you're on a slow machine, and packets are arriving
1594 faster than you can read them off, you're screwed. Hasta la
1595 vista, baby! */
1596 while ((status = readword(dev->base_addr, ISQ_PORT))) {
1597 if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
1598 handled = 1;
1599 switch(status & ISQ_EVENT_MASK) {
1600 case ISQ_RECEIVER_EVENT:
1601 /* Got a packet(s). */
1602 net_rx(dev);
1603 break;
1604 case ISQ_TRANSMITTER_EVENT:
1605 lp->stats.tx_packets++;
1606 netif_wake_queue(dev); /* Inform upper layers. */
1607 if ((status & ( TX_OK |
1608 TX_LOST_CRS |
1609 TX_SQE_ERROR |
1610 TX_LATE_COL |
1611 TX_16_COL)) != TX_OK) {
1612 if ((status & TX_OK) == 0) lp->stats.tx_errors++;
1613 if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
1614 if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
1615 if (status & TX_LATE_COL) lp->stats.tx_window_errors++;
1616 if (status & TX_16_COL) lp->stats.tx_aborted_errors++;
1617 }
1618 break;
1619 case ISQ_BUFFER_EVENT:
1620 if (status & READY_FOR_TX) {
1621 /* we tried to transmit a packet earlier,
1622 but inexplicably ran out of buffers.
1623 That shouldn't happen since we only ever
1624 load one packet. Shrug. Do the right
1625 thing anyway. */
1626 netif_wake_queue(dev); /* Inform upper layers. */
1627 }
1628 if (status & TX_UNDERRUN) {
1629 if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
1630 lp->send_underrun++;
1631 if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
1632 else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
1633 /* transmit cycle is done, although
1634 frame wasn't transmitted - this
1635 avoids having to wait for the upper
1636 layers to timeout on us, in the
1637 event of a tx underrun */
1638 netif_wake_queue(dev); /* Inform upper layers. */
1639 }
1640 #if ALLOW_DMA
1641 if (lp->use_dma && (status & RX_DMA)) {
1642 int count = readreg(dev, PP_DmaFrameCnt);
1643 while(count) {
1644 if (net_debug > 5)
1645 printk("%s: receiving %d DMA frames\n", dev->name, count);
1646 if (net_debug > 2 && count >1)
1647 printk("%s: receiving %d DMA frames\n", dev->name, count);
1648 dma_rx(dev);
1649 if (--count == 0)
1650 count = readreg(dev, PP_DmaFrameCnt);
1651 if (net_debug > 2 && count > 0)
1652 printk("%s: continuing with %d DMA frames\n", dev->name, count);
1653 }
1654 }
1655 #endif
1656 break;
1657 case ISQ_RX_MISS_EVENT:
1658 lp->stats.rx_missed_errors += (status >>6);
1659 break;
1660 case ISQ_TX_COL_EVENT:
1661 lp->stats.collisions += (status >>6);
1662 break;
1663 }
1664 }
1665 return IRQ_RETVAL(handled);
1666 }
1667
1668 static void
1669 count_rx_errors(int status, struct net_local *lp)
1670 {
1671 lp->stats.rx_errors++;
1672 if (status & RX_RUNT) lp->stats.rx_length_errors++;
1673 if (status & RX_EXTRA_DATA) lp->stats.rx_length_errors++;
1674 if (status & RX_CRC_ERROR) if (!(status & (RX_EXTRA_DATA|RX_RUNT)))
1675 /* per str 172 */
1676 lp->stats.rx_crc_errors++;
1677 if (status & RX_DRIBBLE) lp->stats.rx_frame_errors++;
1678 return;
1679 }
1680
1681 /* We have a good packet(s), get it/them out of the buffers. */
1682 static void
1683 net_rx(struct net_device *dev)
1684 {
1685 struct net_local *lp = netdev_priv(dev);
1686 struct sk_buff *skb;
1687 int status, length;
1688
1689 int ioaddr = dev->base_addr;
1690 status = readword(ioaddr, RX_FRAME_PORT);
1691 length = readword(ioaddr, RX_FRAME_PORT);
1692
1693 if ((status & RX_OK) == 0) {
1694 count_rx_errors(status, lp);
1695 return;
1696 }
1697
1698 /* Malloc up new buffer. */
1699 skb = dev_alloc_skb(length + 2);
1700 if (skb == NULL) {
1701 #if 0 /* Again, this seems a cruel thing to do */
1702 printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
1703 #endif
1704 lp->stats.rx_dropped++;
1705 return;
1706 }
1707 skb_reserve(skb, 2); /* longword align L3 header */
1708
1709 readwords(ioaddr, RX_FRAME_PORT, skb_put(skb, length), length >> 1);
1710 if (length & 1)
1711 skb->data[length-1] = readword(ioaddr, RX_FRAME_PORT);
1712
1713 if (net_debug > 3) {
1714 printk( "%s: received %d byte packet of type %x\n",
1715 dev->name, length,
1716 (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
1717 }
1718
1719 skb->protocol=eth_type_trans(skb,dev);
1720 netif_rx(skb);
1721 dev->last_rx = jiffies;
1722 lp->stats.rx_packets++;
1723 lp->stats.rx_bytes += length;
1724 }
1725
1726 #if ALLOW_DMA
1727 static void release_dma_buff(struct net_local *lp)
1728 {
1729 if (lp->dma_buff) {
1730 free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024));
1731 lp->dma_buff = NULL;
1732 }
1733 }
1734 #endif
1735
1736 /* The inverse routine to net_open(). */
1737 static int
1738 net_close(struct net_device *dev)
1739 {
1740 #if ALLOW_DMA
1741 struct net_local *lp = netdev_priv(dev);
1742 #endif
1743
1744 netif_stop_queue(dev);
1745
1746 writereg(dev, PP_RxCFG, 0);
1747 writereg(dev, PP_TxCFG, 0);
1748 writereg(dev, PP_BufCFG, 0);
1749 writereg(dev, PP_BusCTL, 0);
1750
1751 free_irq(dev->irq, dev);
1752
1753 #if ALLOW_DMA
1754 if (lp->use_dma && lp->dma) {
1755 free_dma(dev->dma);
1756 release_dma_buff(lp);
1757 }
1758 #endif
1759
1760 /* Update the statistics here. */
1761 return 0;
1762 }
1763
1764 /* Get the current statistics. This may be called with the card open or
1765 closed. */
1766 static struct net_device_stats *
1767 net_get_stats(struct net_device *dev)
1768 {
1769 struct net_local *lp = netdev_priv(dev);
1770 unsigned long flags;
1771
1772 spin_lock_irqsave(&lp->lock, flags);
1773 /* Update the statistics from the device registers. */
1774 lp->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
1775 lp->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
1776 spin_unlock_irqrestore(&lp->lock, flags);
1777
1778 return &lp->stats;
1779 }
1780
1781 static void set_multicast_list(struct net_device *dev)
1782 {
1783 struct net_local *lp = netdev_priv(dev);
1784 unsigned long flags;
1785
1786 spin_lock_irqsave(&lp->lock, flags);
1787 if(dev->flags&IFF_PROMISC)
1788 {
1789 lp->rx_mode = RX_ALL_ACCEPT;
1790 }
1791 else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
1792 {
1793 /* The multicast-accept list is initialized to accept-all, and we
1794 rely on higher-level filtering for now. */
1795 lp->rx_mode = RX_MULTCAST_ACCEPT;
1796 }
1797 else
1798 lp->rx_mode = 0;
1799
1800 writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
1801
1802 /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
1803 writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
1804 (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
1805 spin_unlock_irqrestore(&lp->lock, flags);
1806 }
1807
1808
1809 static int set_mac_address(struct net_device *dev, void *p)
1810 {
1811 int i;
1812 struct sockaddr *addr = p;
1813
1814 if (netif_running(dev))
1815 return -EBUSY;
1816
1817 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1818
1819 if (net_debug)
1820 printk("%s: Setting MAC address to %pM.\n",
1821 dev->name, dev->dev_addr);
1822
1823 /* set the Ethernet address */
1824 for (i=0; i < ETH_ALEN/2; i++)
1825 writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
1826
1827 return 0;
1828 }
1829
1830 #ifdef MODULE
1831
1832 static struct net_device *dev_cs89x0;
1833
1834 /*
1835 * Support the 'debug' module parm even if we're compiled for non-debug to
1836 * avoid breaking someone's startup scripts
1837 */
1838
1839 static int io;
1840 static int irq;
1841 static int debug;
1842 static char media[8];
1843 static int duplex=-1;
1844
1845 static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */
1846 static int dma;
1847 static int dmasize=16; /* or 64 */
1848
1849 module_param(io, int, 0);
1850 module_param(irq, int, 0);
1851 module_param(debug, int, 0);
1852 module_param_string(media, media, sizeof(media), 0);
1853 module_param(duplex, int, 0);
1854 module_param(dma , int, 0);
1855 module_param(dmasize , int, 0);
1856 module_param(use_dma , int, 0);
1857 MODULE_PARM_DESC(io, "cs89x0 I/O base address");
1858 MODULE_PARM_DESC(irq, "cs89x0 IRQ number");
1859 #if DEBUGGING
1860 MODULE_PARM_DESC(debug, "cs89x0 debug level (0-6)");
1861 #else
1862 MODULE_PARM_DESC(debug, "(ignored)");
1863 #endif
1864 MODULE_PARM_DESC(media, "Set cs89x0 adapter(s) media type(s) (rj45,bnc,aui)");
1865 /* No other value than -1 for duplex seems to be currently interpreted */
1866 MODULE_PARM_DESC(duplex, "(ignored)");
1867 #if ALLOW_DMA
1868 MODULE_PARM_DESC(dma , "cs89x0 ISA DMA channel; ignored if use_dma=0");
1869 MODULE_PARM_DESC(dmasize , "cs89x0 DMA size in kB (16,64); ignored if use_dma=0");
1870 MODULE_PARM_DESC(use_dma , "cs89x0 using DMA (0-1)");
1871 #else
1872 MODULE_PARM_DESC(dma , "(ignored)");
1873 MODULE_PARM_DESC(dmasize , "(ignored)");
1874 MODULE_PARM_DESC(use_dma , "(ignored)");
1875 #endif
1876
1877 MODULE_AUTHOR("Mike Cruse, Russwll Nelson <nelson@crynwr.com>, Andrew Morton");
1878 MODULE_LICENSE("GPL");
1879
1880
1881 /*
1882 * media=t - specify media type
1883 or media=2
1884 or media=aui
1885 or medai=auto
1886 * duplex=0 - specify forced half/full/autonegotiate duplex
1887 * debug=# - debug level
1888
1889
1890 * Default Chip Configuration:
1891 * DMA Burst = enabled
1892 * IOCHRDY Enabled = enabled
1893 * UseSA = enabled
1894 * CS8900 defaults to half-duplex if not specified on command-line
1895 * CS8920 defaults to autoneg if not specified on command-line
1896 * Use reset defaults for other config parameters
1897
1898 * Assumptions:
1899 * media type specified is supported (circuitry is present)
1900 * if memory address is > 1MB, then required mem decode hw is present
1901 * if 10B-2, then agent other than driver will enable DC/DC converter
1902 (hw or software util)
1903
1904
1905 */
1906
1907 int __init init_module(void)
1908 {
1909 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
1910 struct net_local *lp;
1911 int ret = 0;
1912
1913 #if DEBUGGING
1914 net_debug = debug;
1915 #else
1916 debug = 0;
1917 #endif
1918 if (!dev)
1919 return -ENOMEM;
1920
1921 dev->irq = irq;
1922 dev->base_addr = io;
1923 lp = netdev_priv(dev);
1924
1925 #if ALLOW_DMA
1926 if (use_dma) {
1927 lp->use_dma = use_dma;
1928 lp->dma = dma;
1929 lp->dmasize = dmasize;
1930 }
1931 #endif
1932
1933 spin_lock_init(&lp->lock);
1934
1935 /* boy, they'd better get these right */
1936 if (!strcmp(media, "rj45"))
1937 lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
1938 else if (!strcmp(media, "aui"))
1939 lp->adapter_cnf = A_CNF_MEDIA_AUI | A_CNF_AUI;
1940 else if (!strcmp(media, "bnc"))
1941 lp->adapter_cnf = A_CNF_MEDIA_10B_2 | A_CNF_10B_2;
1942 else
1943 lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
1944
1945 if (duplex==-1)
1946 lp->auto_neg_cnf = AUTO_NEG_ENABLE;
1947
1948 if (io == 0) {
1949 printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n");
1950 printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n");
1951 ret = -EPERM;
1952 goto out;
1953 } else if (io <= 0x1ff) {
1954 ret = -ENXIO;
1955 goto out;
1956 }
1957
1958 #if ALLOW_DMA
1959 if (use_dma && dmasize != 16 && dmasize != 64) {
1960 printk(KERN_ERR "cs89x0.c: dma size must be either 16K or 64K, not %dK\n", dmasize);
1961 ret = -EPERM;
1962 goto out;
1963 }
1964 #endif
1965 ret = cs89x0_probe1(dev, io, 1);
1966 if (ret)
1967 goto out;
1968
1969 dev_cs89x0 = dev;
1970 return 0;
1971 out:
1972 free_netdev(dev);
1973 return ret;
1974 }
1975
1976 void __exit
1977 cleanup_module(void)
1978 {
1979 unregister_netdev(dev_cs89x0);
1980 writeword(dev_cs89x0->base_addr, ADD_PORT, PP_ChipID);
1981 release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
1982 free_netdev(dev_cs89x0);
1983 }
1984 #endif /* MODULE */
1985
1986 /*
1987 * Local variables:
1988 * version-control: t
1989 * kept-new-versions: 5
1990 * c-indent-level: 8
1991 * tab-width: 8
1992 * End:
1993 *
1994 */
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree