2 * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
3 * remains copyright by the original authors
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h> /* ARRAY_SIZE */
28 #include <linux/version.h>
29 #include <linux/module.h>
30 #include <linux/jiffies.h>
31 #include <linux/timer.h>
32 #include <linux/sched.h>
34 #include <linux/delay.h>
35 #include <linux/wireless.h>
36 #include <linux/ieee80211.h>
38 #include "rtl819x_HT.h"
39 #include "rtl819x_BA.h"
40 #include "rtl819x_TS.h"
42 #define KEY_TYPE_NA 0x0
43 #define KEY_TYPE_WEP40 0x1
44 #define KEY_TYPE_TKIP 0x2
45 #define KEY_TYPE_CCMP 0x4
46 #define KEY_TYPE_WEP104 0x5
48 #define aSifsTime (((priv->ieee80211->current_network.mode == IEEE_A) || \
49 (priv->ieee80211->current_network.mode == IEEE_N_24G) || \
50 (priv->ieee80211->current_network.mode == IEEE_N_5G)) \
53 #define MGMT_QUEUE_NUM 5
55 #define IEEE_CMD_SET_WPA_PARAM 1
56 #define IEEE_CMD_SET_WPA_IE 2
57 #define IEEE_CMD_SET_ENCRYPTION 3
58 #define IEEE_CMD_MLME 4
60 #define IEEE_PARAM_WPA_ENABLED 1
61 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2
62 #define IEEE_PARAM_DROP_UNENCRYPTED 3
63 #define IEEE_PARAM_PRIVACY_INVOKED 4
64 #define IEEE_PARAM_AUTH_ALGS 5
65 #define IEEE_PARAM_IEEE_802_1X 6
66 //It should consistent with the driver_XXX.c
68 #define IEEE_PARAM_WPAX_SELECT 7
69 //Added for notify the encryption type selection
71 #define IEEE_PROTO_WPA 1
72 #define IEEE_PROTO_RSN 2
73 //Added for notify the encryption type selection
75 #define IEEE_WPAX_USEGROUP 0
76 #define IEEE_WPAX_WEP40 1
77 #define IEEE_WPAX_TKIP 2
78 #define IEEE_WPAX_WRAP 3
79 #define IEEE_WPAX_CCMP 4
80 #define IEEE_WPAX_WEP104 5
82 #define IEEE_KEY_MGMT_IEEE8021X 1
83 #define IEEE_KEY_MGMT_PSK 2
85 #define IEEE_MLME_STA_DEAUTH 1
86 #define IEEE_MLME_STA_DISASSOC 2
89 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
90 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
91 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
92 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
93 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
94 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
97 #define IEEE_CRYPT_ALG_NAME_LEN 16
99 #define MAX_IE_LEN 0xff
101 typedef struct ieee_param
{
103 u8 sta_addr
[ETH_ALEN
];
119 u8 alg
[IEEE_CRYPT_ALG_NAME_LEN
];
123 u8 seq
[8]; /* sequence counter (set: RX, get: TX) */
130 #define MSECS(t) msecs_to_jiffies(t)
131 #define msleep_interruptible_rsl msleep_interruptible
133 #define IEEE80211_DATA_LEN 2304
134 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
137 The figure in section 7.1.2 suggests a body size of up to 2312
138 bytes is allowed, which is a bit confusing, I suspect this
139 represents the 2304 bytes of real data, plus a possible 8 bytes of
140 WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
141 #define IEEE80211_1ADDR_LEN 10
142 #define IEEE80211_2ADDR_LEN 16
143 #define IEEE80211_3ADDR_LEN 24
144 #define IEEE80211_4ADDR_LEN 30
145 #define IEEE80211_FCS_LEN 4
146 #define IEEE80211_HLEN IEEE80211_4ADDR_LEN
147 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
148 #define IEEE80211_MGMT_HDR_LEN 24
149 #define IEEE80211_DATA_HDR3_LEN 24
150 #define IEEE80211_DATA_HDR4_LEN 30
152 #define MIN_FRAG_THRESHOLD 256U
153 #define MAX_FRAG_THRESHOLD 2346U
156 /* Frame control field constants */
157 #define IEEE80211_FCTL_FRAMETYPE 0x00fc
158 #define IEEE80211_FCTL_DSTODS 0x0300 //added by david
159 #define IEEE80211_FCTL_WEP 0x4000
162 #define IEEE80211_STYPE_MANAGE_ACT 0x00D0
165 #define IEEE80211_STYPE_BLOCKACK 0x0094
168 #define IEEE80211_QCTL_TID 0x000F
171 #define CONFIG_IEEE80211_DEBUG
172 #ifdef CONFIG_IEEE80211_DEBUG
173 extern u32 ieee80211_debug_level
;
174 #define IEEE80211_DEBUG(level, fmt, args...) \
176 if (ieee80211_debug_level & (level)) \
177 printk(KERN_DEBUG "ieee80211: " fmt, ## args); \
179 #define IEEE80211_DEBUG_DATA(level, data, datalen) \
181 if ((ieee80211_debug_level & (level)) == (level)) { \
182 u8 *pdata = (u8 *)data; \
184 printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
185 for (i = 0; i < (int)(datalen); i++) { \
186 printk("%2x ", pdata[i]); \
187 if ((i + 1) % 16 == 0) \
194 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
195 #define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
196 #endif /* CONFIG_IEEE80211_DEBUG */
198 #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
199 #define MAC_ARG(x) ((u8 *)(x))[0], ((u8 *)(x))[1], ((u8 *)(x))[2], \
200 ((u8 *)(x))[3], ((u8 *)(x))[4], ((u8 *)(x))[5]
203 * To use the debug system;
205 * If you are defining a new debug classification, simply add it to the #define
206 * list here in the form of:
208 * #define IEEE80211_DL_xxxx VALUE
210 * shifting value to the left one bit from the previous entry. xxxx should be
211 * the name of the classification (for example, WEP)
213 * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
214 * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
215 * to send output to that classification.
217 * To add your debug level to the list of levels seen when you perform
219 * % cat /proc/net/ipw/debug_level
221 * you simply need to add your entry to the ipw_debug_levels array.
223 * If you do not see debug_level in /proc/net/ipw then you do not have
224 * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
228 #define IEEE80211_DL_INFO (1<<0)
229 #define IEEE80211_DL_WX (1<<1)
230 #define IEEE80211_DL_SCAN (1<<2)
231 #define IEEE80211_DL_STATE (1<<3)
232 #define IEEE80211_DL_MGMT (1<<4)
233 #define IEEE80211_DL_FRAG (1<<5)
234 #define IEEE80211_DL_EAP (1<<6)
235 #define IEEE80211_DL_DROP (1<<7)
237 #define IEEE80211_DL_TX (1<<8)
238 #define IEEE80211_DL_RX (1<<9)
240 #define IEEE80211_DL_HT (1 << 10)
241 #define IEEE80211_DL_BA (1 << 11)
242 #define IEEE80211_DL_TS (1 << 12)
243 #define IEEE80211_DL_QOS (1 << 13)
244 #define IEEE80211_DL_REORDER (1 << 14)
245 #define IEEE80211_DL_IOT (1 << 15)
246 #define IEEE80211_DL_IPS (1 << 16)
247 #define IEEE80211_DL_TRACE (1 << 29)
248 #define IEEE80211_DL_DATA (1 << 30)
249 #define IEEE80211_DL_ERR (1 << 31)
251 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
252 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
253 #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
255 #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
256 #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
257 #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
258 #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
259 #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
260 #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
261 #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
262 #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
263 #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
264 #define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
266 #include <linux/netdevice.h>
267 #include <linux/if_arp.h> /* ARPHRD_ETHER */
270 #define WIRELESS_SPY // enable iwspy support
272 #include <net/iw_handler.h> // new driver API
275 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
276 #endif /* ETH_P_PAE */
278 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
280 #ifndef ETH_P_80211_RAW
281 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
284 /* IEEE 802.11 defines */
286 #define P80211_OUI_LEN 3
288 struct ieee80211_snap_hdr
{
290 u8 dsap
; /* always 0xAA */
291 u8 ssap
; /* always 0xAA */
292 u8 ctrl
; /* always 0x03 */
293 u8 oui
[P80211_OUI_LEN
]; /* organizational universal id */
295 } __attribute__ ((packed
));
297 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
299 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
300 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
301 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
303 #define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
304 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
305 #define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
307 #define RTL_WLAN_AUTH_LEAP 2
309 #define WLAN_CAPABILITY_BSS (1<<0)
310 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
312 #define IEEE80211_STATMASK_SIGNAL (1<<0)
313 #define IEEE80211_STATMASK_RSSI (1<<1)
314 #define IEEE80211_STATMASK_NOISE (1<<2)
315 #define IEEE80211_STATMASK_RATE (1<<3)
316 #define IEEE80211_STATMASK_WEMASK 0x7
318 #define IEEE80211_CCK_MODULATION (1<<0)
319 #define IEEE80211_OFDM_MODULATION (1<<1)
321 #define IEEE80211_24GHZ_BAND (1<<0)
322 #define IEEE80211_52GHZ_BAND (1<<1)
324 #define IEEE80211_CCK_RATE_LEN 4
325 #define IEEE80211_CCK_RATE_1MB 0x02
326 #define IEEE80211_CCK_RATE_2MB 0x04
327 #define IEEE80211_CCK_RATE_5MB 0x0B
328 #define IEEE80211_CCK_RATE_11MB 0x16
329 #define IEEE80211_OFDM_RATE_LEN 8
330 #define IEEE80211_OFDM_RATE_6MB 0x0C
331 #define IEEE80211_OFDM_RATE_9MB 0x12
332 #define IEEE80211_OFDM_RATE_12MB 0x18
333 #define IEEE80211_OFDM_RATE_18MB 0x24
334 #define IEEE80211_OFDM_RATE_24MB 0x30
335 #define IEEE80211_OFDM_RATE_36MB 0x48
336 #define IEEE80211_OFDM_RATE_48MB 0x60
337 #define IEEE80211_OFDM_RATE_54MB 0x6C
338 #define IEEE80211_BASIC_RATE_MASK 0x80
340 #define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
341 #define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
342 #define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
343 #define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
344 #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
345 #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
346 #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
347 #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
348 #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
349 #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
350 #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
351 #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
353 #define IEEE80211_CCK_RATES_MASK 0x0000000F
354 #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
355 IEEE80211_CCK_RATE_2MB_MASK)
356 #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
357 IEEE80211_CCK_RATE_5MB_MASK | \
358 IEEE80211_CCK_RATE_11MB_MASK)
360 #define IEEE80211_OFDM_RATES_MASK 0x00000FF0
361 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
362 IEEE80211_OFDM_RATE_12MB_MASK | \
363 IEEE80211_OFDM_RATE_24MB_MASK)
364 #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
365 IEEE80211_OFDM_RATE_9MB_MASK | \
366 IEEE80211_OFDM_RATE_18MB_MASK | \
367 IEEE80211_OFDM_RATE_36MB_MASK | \
368 IEEE80211_OFDM_RATE_48MB_MASK | \
369 IEEE80211_OFDM_RATE_54MB_MASK)
370 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
371 IEEE80211_CCK_DEFAULT_RATES_MASK)
373 #define IEEE80211_NUM_OFDM_RATES 8
374 #define IEEE80211_NUM_CCK_RATES 4
375 #define IEEE80211_OFDM_SHIFT_MASK_A 4
378 /* this is stolen and modified from the madwifi driver*/
379 #define IEEE80211_FC0_TYPE_MASK 0x0c
380 #define IEEE80211_FC0_TYPE_DATA 0x08
381 #define IEEE80211_FC0_SUBTYPE_MASK 0xB0
382 #define IEEE80211_FC0_SUBTYPE_QOS 0x80
384 #define IEEE80211_QOS_HAS_SEQ(fc) \
385 (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
386 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
388 /* this is stolen from ipw2200 driver */
389 #define IEEE_IBSS_MAC_HASH_SIZE 31
390 struct ieee_ibss_seq
{
394 unsigned long packet_time
[17];
395 struct list_head list
;
398 /* NOTE: This data is for statistical purposes; not all hardware provides this
399 * information for frames received. Not setting these will not cause
400 * any adverse affects. */
401 struct ieee80211_rx_stats
{
406 u16 rate
; /* in 100 kbps */
417 u8 SignalQuality
; /* in 0-100 index */
418 /* real power in dBm for this packet, no beautification & aggregation */
420 s8 RxPower
; /* in dBm Translate from PWdB */
421 u8 SignalStrength
; /* in 0-100 index */
425 u16 bShortPreamble
:1;
426 u16 Antenna
:1; /* RTL8185 */
427 u16 Decrypted
:1; /* RTL8185, RTL8187 */
428 u16 Wakeup
:1; /* RTL8185 */
429 u16 Reserved0
:1; /* RTL8185 */
437 /* < 11n or 8190 specific code */
443 bool RxIs40MHzPacket
;
445 u8 RxMIMOSignalStrength
[4]; /* in 0~100 index */
446 s8 RxMIMOSignalQuality
[2];
447 bool bPacketMatchBSSID
;
452 /* total packet length: must equal to sum of all FragLength */
454 /* FragLength should equal to PacketLength in non-fragment case */
456 u16 fragoffset
; /* data offset for this fragment */
458 bool bisrxaggrsubframe
;
459 bool bPacketBeacon
; /* for rssi */
460 bool bToSelfBA
; /* for rssi */
461 char cck_adc_pwdb
[4]; /* for rx path selection */
463 u8 nTotalAggPkt
; /* number of aggregated packets */
466 /* IEEE 802.11 requires that STA supports concurrent reception of at least
467 * three fragmented frames. This define can be increased to support more
468 * concurrent frames, but it should be noted that each entry can consume about
469 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
470 #define IEEE80211_FRAG_CACHE_LEN 4
472 struct ieee80211_frag_entry
{
473 unsigned long first_frag_time
;
475 unsigned int last_frag
;
477 u8 src_addr
[ETH_ALEN
];
478 u8 dst_addr
[ETH_ALEN
];
481 struct ieee80211_stats
{
482 unsigned int tx_unicast_frames
;
483 unsigned int tx_multicast_frames
;
484 unsigned int tx_fragments
;
485 unsigned int tx_unicast_octets
;
486 unsigned int tx_multicast_octets
;
487 unsigned int tx_deferred_transmissions
;
488 unsigned int tx_single_retry_frames
;
489 unsigned int tx_multiple_retry_frames
;
490 unsigned int tx_retry_limit_exceeded
;
491 unsigned int tx_discards
;
492 unsigned int rx_unicast_frames
;
493 unsigned int rx_multicast_frames
;
494 unsigned int rx_fragments
;
495 unsigned int rx_unicast_octets
;
496 unsigned int rx_multicast_octets
;
497 unsigned int rx_fcs_errors
;
498 unsigned int rx_discards_no_buffer
;
499 unsigned int tx_discards_wrong_sa
;
500 unsigned int rx_discards_undecryptable
;
501 unsigned int rx_message_in_msg_fragments
;
502 unsigned int rx_message_in_bad_msg_fragments
;
505 struct ieee80211_device
;
507 #include "ieee80211_crypt.h"
509 #define SEC_KEY_1 (1<<0)
510 #define SEC_KEY_2 (1<<1)
511 #define SEC_KEY_3 (1<<2)
512 #define SEC_KEY_4 (1<<3)
513 #define SEC_ACTIVE_KEY (1<<4)
514 #define SEC_AUTH_MODE (1<<5)
515 #define SEC_UNICAST_GROUP (1<<6)
516 #define SEC_LEVEL (1<<7)
517 #define SEC_ENABLED (1<<8)
519 #define SEC_LEVEL_0 0 /* None */
520 #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
521 #define SEC_LEVEL_2 2 /* Level 1 + TKIP */
522 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
523 #define SEC_LEVEL_3 4 /* Level 2 + CCMP */
526 #define WEP_KEY_LEN 13
527 #define SCM_KEY_LEN 32
529 struct ieee80211_security
{
534 unicast_uses_group
:1,
536 u8 key_sizes
[WEP_KEYS
];
537 u8 keys
[WEP_KEYS
][SCM_KEY_LEN
];
540 } __attribute__ ((packed
));
544 802.11 data frame from AP
545 ,-------------------------------------------------------------------.
546 Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
547 |------|------|---------|---------|---------|------|---------|------|
548 Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
549 | | tion | (BSSID) | | | ence | data | |
550 `-------------------------------------------------------------------'
554 /* Management Frame Information Element Types */
558 MFIE_TYPE_FH_SET
= 2,
559 MFIE_TYPE_DS_SET
= 3,
560 MFIE_TYPE_CF_SET
= 4,
562 MFIE_TYPE_IBSS_SET
= 6,
563 MFIE_TYPE_COUNTRY
= 7,
564 MFIE_TYPE_HOP_PARAMS
= 8,
565 MFIE_TYPE_HOP_TABLE
= 9,
566 MFIE_TYPE_REQUEST
= 10,
567 MFIE_TYPE_CHALLENGE
= 16,
568 MFIE_TYPE_POWER_CONSTRAINT
= 32,
569 MFIE_TYPE_POWER_CAPABILITY
= 33,
570 MFIE_TYPE_TPC_REQUEST
= 34,
571 MFIE_TYPE_TPC_REPORT
= 35,
572 MFIE_TYPE_SUPP_CHANNELS
= 36,
574 MFIE_TYPE_MEASURE_REQUEST
= 38,
575 MFIE_TYPE_MEASURE_REPORT
= 39,
576 MFIE_TYPE_QUIET
= 40,
577 MFIE_TYPE_IBSS_DFS
= 41,
580 MFIE_TYPE_RATES_EX
= 50,
581 MFIE_TYPE_HT_CAP
= 45,
582 MFIE_TYPE_HT_INFO
= 61,
583 MFIE_TYPE_AIRONET
=133,
584 MFIE_TYPE_GENERIC
= 221,
585 MFIE_TYPE_QOS_PARAMETER
= 222,
588 /* Minimal header; can be used for passing 802.11 frames with sufficient
589 * information to determine what type of underlying data type is actually
590 * stored in the data. */
591 struct rtl_ieee80211_hdr
{
595 } __attribute__ ((packed
));
597 struct ieee80211_hdr_1addr
{
602 } __attribute__ ((packed
));
604 struct ieee80211_hdr_2addr
{
610 } __attribute__ ((packed
));
612 struct ieee80211_hdr_4addr
{
621 } __attribute__ ((packed
));
623 struct ieee80211_hdr_3addrqos
{
632 } __attribute__ ((packed
));
634 struct ieee80211_hdr_4addrqos
{
644 } __attribute__ ((packed
));
646 struct ieee80211_info_element
{
650 } __attribute__ ((packed
));
652 struct ieee80211_authentication
{
653 struct ieee80211_hdr_3addr header
;
658 struct ieee80211_info_element info_element
[0];
659 } __attribute__ ((packed
));
661 struct ieee80211_disassoc
{
662 struct ieee80211_hdr_3addr header
;
664 } __attribute__ ((packed
));
666 struct ieee80211_probe_request
{
667 struct ieee80211_hdr_3addr header
;
668 /* SSID, supported rates */
669 struct ieee80211_info_element info_element
[0];
670 } __attribute__ ((packed
));
672 struct ieee80211_probe_response
{
673 struct ieee80211_hdr_3addr header
;
675 __le16 beacon_interval
;
677 /* SSID, supported rates, FH params, DS params,
678 * CF params, IBSS params, TIM (if beacon), RSN */
679 struct ieee80211_info_element info_element
[0];
680 } __attribute__ ((packed
));
682 struct ieee80211_assoc_request_frame
{
683 struct ieee80211_hdr_3addr header
;
685 __le16 listen_interval
;
686 /* SSID, supported rates, RSN */
687 struct ieee80211_info_element info_element
[0];
688 } __attribute__ ((packed
));
690 struct ieee80211_reassoc_request_frame
{
691 struct ieee80211_hdr_3addr header
;
693 __le16 listen_interval
;
694 u8 current_ap
[ETH_ALEN
];
695 /* SSID, supported rates, RSN */
696 struct ieee80211_info_element info_element
[0];
697 } __attribute__ ((packed
));
699 struct ieee80211_assoc_response_frame
{
700 struct ieee80211_hdr_3addr header
;
704 struct ieee80211_info_element info_element
[0]; /* supported rates */
705 } __attribute__ ((packed
));
707 struct ieee80211_txb
{
715 struct sk_buff
*fragments
[0];
718 #define MAX_SUBFRAME_COUNT 64
719 struct ieee80211_rxb
{
721 struct sk_buff
*subframes
[MAX_SUBFRAME_COUNT
];
724 }__attribute__((packed
));
726 /* SWEEP TABLE ENTRIES NUMBER */
727 #define MAX_SWEEP_TAB_ENTRIES 42
728 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
729 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
730 * only use 8, and then use extended rates for the remaining supported
731 * rates. Other APs, however, stick all of their supported rates on the
732 * main rates information element... */
733 #define MAX_RATES_LENGTH ((u8)12)
734 #define MAX_RATES_EX_LENGTH ((u8)16)
735 #define MAX_NETWORK_COUNT 128
737 #define MAX_CHANNEL_NUMBER 161
739 #define IEEE80211_SOFTMAC_SCAN_TIME 100 /* (HZ / 2) */
740 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
742 #define CRC_LENGTH 4U
744 #define MAX_WPA_IE_LEN 64
746 #define NETWORK_EMPTY_ESSID (1 << 0)
747 #define NETWORK_HAS_OFDM (1 << 1)
748 #define NETWORK_HAS_CCK (1 << 2)
751 #define NETWORK_HAS_QOS_PARAMETERS (1 << 3)
752 #define NETWORK_HAS_QOS_INFORMATION (1 << 4)
753 #define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
754 NETWORK_HAS_QOS_INFORMATION)
756 #define NETWORK_HAS_ERP_VALUE (1 << 10)
758 #define QOS_QUEUE_NUM 4
759 #define QOS_OUI_LEN 3
760 #define QOS_OUI_TYPE 2
761 #define QOS_ELEMENT_ID 221
762 #define QOS_OUI_INFO_SUB_TYPE 0
763 #define QOS_OUI_PARAM_SUB_TYPE 1
764 #define QOS_VERSION_1 1
765 #define QOS_AIFSN_MIN_VALUE 2
767 struct ieee80211_qos_information_element
{
775 } __attribute__ ((packed
));
777 struct ieee80211_qos_ac_parameter
{
781 } __attribute__ ((packed
));
783 struct ieee80211_qos_parameter_info
{
784 struct ieee80211_qos_information_element info_element
;
786 struct ieee80211_qos_ac_parameter ac_params_record
[QOS_QUEUE_NUM
];
787 } __attribute__ ((packed
));
789 struct ieee80211_qos_parameters
{
790 __le16 cw_min
[QOS_QUEUE_NUM
];
791 __le16 cw_max
[QOS_QUEUE_NUM
];
792 u8 aifs
[QOS_QUEUE_NUM
];
793 u8 flag
[QOS_QUEUE_NUM
];
794 __le16 tx_op_limit
[QOS_QUEUE_NUM
];
795 } __attribute__ ((packed
));
797 struct ieee80211_qos_data
{
798 struct ieee80211_qos_parameters parameters
;
805 struct ieee80211_tim_parameters
{
808 } __attribute__ ((packed
));
810 struct ieee80211_wmm_ac_param
{
816 struct ieee80211_wmm_ts_info
{
820 } __attribute__ ((packed
));
822 struct ieee80211_wmm_tspec_elem
{
823 struct ieee80211_wmm_ts_info ts_info
;
839 }__attribute__((packed
));
846 EAPOL_ENCAP_ASF_ALERT
849 static const char *eap_types
[] = {
850 [EAP_PACKET
] = "EAP-Packet",
851 [EAPOL_START
] = "EAPOL-Start",
852 [EAPOL_LOGOFF
] = "EAPOL-Logoff",
853 [EAPOL_KEY
] = "EAPOL-Key",
854 [EAPOL_ENCAP_ASF_ALERT
] = "EAPOL-Encap-ASF-Alert"
857 static inline const char *eap_get_type(int type
)
859 return ((u32
)type
>= ARRAY_SIZE(eap_types
)) ? "Unknown" : eap_types
[type
];
868 } __attribute__ ((packed
));
870 struct ieee80211_softmac_stats
{
871 unsigned int rx_ass_ok
;
872 unsigned int rx_ass_err
;
873 unsigned int rx_probe_rq
;
874 unsigned int tx_probe_rs
;
875 unsigned int tx_beacons
;
876 unsigned int rx_auth_rq
;
877 unsigned int rx_auth_rs_ok
;
878 unsigned int rx_auth_rs_err
;
879 unsigned int tx_auth_rq
;
880 unsigned int no_auth_rs
;
881 unsigned int no_ass_rs
;
882 unsigned int tx_ass_rq
;
883 unsigned int rx_ass_rq
;
884 unsigned int tx_probe_rq
;
885 unsigned int reassoc
;
886 unsigned int swtxstop
;
887 unsigned int swtxawake
;
888 unsigned char CurrentShowTxate
;
889 unsigned char last_packet_rate
;
890 unsigned int txretrycount
;
893 #define BEACON_PROBE_SSID_ID_POSITION 12
895 struct ieee80211_info_element_hdr
{
898 } __attribute__ ((packed
));
901 * These are the data types that can make up management packets
907 u8 current_ap[ETH_ALEN];
910 u16 association_id:14, reserved:2;
911 } __attribute__ ((packed));
917 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
918 #define IEEE80211_DEFAULT_BASIC_RATE 2 /* 1Mbps */
920 enum {WMM_all_frame
, WMM_two_frame
, WMM_four_frame
, WMM_six_frame
};
921 #define MAX_SP_Len (WMM_all_frame << 4)
922 #define IEEE80211_QOS_TID 0x0f
923 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
925 #define IEEE80211_DTIM_MBCAST 4
926 #define IEEE80211_DTIM_UCAST 2
927 #define IEEE80211_DTIM_VALID 1
928 #define IEEE80211_DTIM_INVALID 0
930 #define IEEE80211_PS_DISABLED 0
931 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
932 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
934 //added by David for QoS 2006/6/30
935 //#define WMM_Hang_8187
940 #define WME_AC_BK 0x00
941 #define WME_AC_BE 0x01
942 #define WME_AC_VI 0x02
943 #define WME_AC_VO 0x03
944 #define WME_ACI_MASK 0x03
945 #define WME_AIFSN_MASK 0x03
946 #define WME_AC_PRAM_LEN 16
948 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
949 //#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
950 #define UP2AC(up) ( \
951 ((up) < 1) ? WME_AC_BE : \
952 ((up) < 3) ? WME_AC_BK : \
953 ((up) < 4) ? WME_AC_BE : \
954 ((up) < 6) ? WME_AC_VI : \
957 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
958 #define AC2UP(_ac) ( \
959 ((_ac) == WME_AC_VO) ? 6 : \
960 ((_ac) == WME_AC_VI) ? 5 : \
961 ((_ac) == WME_AC_BK) ? 1 : \
964 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
966 /* length of two Ethernet address plus ether type */
967 #define ETHERNET_HEADER_SIZE 14
969 struct ether_header
{
970 u8 ether_dhost
[ETHER_ADDR_LEN
];
971 u8 ether_shost
[ETHER_ADDR_LEN
];
973 } __attribute__((packed
));
975 #ifndef ETHERTYPE_PAE
976 #define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
979 #define ETHERTYPE_IP 0x0800 /* IP protocol */
982 struct ieee80211_network
{
983 /* These entries are used to identify a unique network */
986 /* Ensure null-terminated for any debug msgs */
987 u8 ssid
[IW_ESSID_MAX_SIZE
+ 1];
990 struct ieee80211_qos_data qos_data
;
998 /* CCXv4 S59, MBSSID. */
1003 /* CCX 2 S38, WLAN Device Version Number element. */
1004 bool bWithCcxVerNum
;
1007 /* These are network statistics */
1008 struct ieee80211_rx_stats stats
;
1010 u8 rates
[MAX_RATES_LENGTH
];
1012 u8 rates_ex
[MAX_RATES_EX_LENGTH
];
1014 unsigned long last_scanned
;
1019 u16 beacon_interval
;
1020 u16 listen_interval
;
1023 u8 wpa_ie
[MAX_WPA_IE_LEN
];
1025 u8 rsn_ie
[MAX_WPA_IE_LEN
];
1028 struct ieee80211_tim_parameters tim
;
1031 u32 last_dtim_sta_time
[2];
1035 struct ieee80211_wmm_ac_param wmm_param
[4];
1037 u8 Turbo_Enable
;//enable turbo mode, added by thomas
1039 u8 CountryIeBuf
[MAX_IE_LEN
];
1043 /* Added to handle broadcom AP management frame CCK rate. */
1044 bool broadcom_cap_exist
;
1045 bool realtek_cap_exit
;
1046 bool marvell_cap_exist
;
1047 bool ralink_cap_exist
;
1048 bool atheros_cap_exist
;
1049 bool cisco_cap_exist
;
1050 bool unknown_cap_exist
;
1051 bool berp_info_valid
;
1052 bool buseprotection
;
1054 struct list_head list
; /* put at the end of the structure */
1057 enum ieee80211_state
{
1059 /* the card is not linked at all */
1060 IEEE80211_NOLINK
= 0,
1062 /* IEEE80211_ASSOCIATING* are for BSS client mode
1063 * the driver shall not perform RX filtering unless
1064 * the state is LINKED.
1065 * The driver shall just check for the state LINKED and
1066 * defaults to NOLINK for ALL the other states (including
1070 /* the association procedure will start (wq scheduling)*/
1071 IEEE80211_ASSOCIATING
,
1072 IEEE80211_ASSOCIATING_RETRY
,
1074 /* the association procedure is sending AUTH request*/
1075 IEEE80211_ASSOCIATING_AUTHENTICATING
,
1077 /* the association procedure has successfully authentcated
1078 * and is sending association request
1080 IEEE80211_ASSOCIATING_AUTHENTICATED
,
1082 /* the link is ok. the card associated to a BSS or linked
1083 * to a ibss cell or acting as an AP and creating the bss
1087 /* same as LINKED, but the driver shall apply RX filter
1088 * rules as we are in NO_LINK mode. As the card is still
1089 * logically linked, but it is doing a syncro site survey
1090 * then it will be back to LINKED state.
1092 IEEE80211_LINKED_SCANNING
,
1096 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1097 #define DEFAULT_FTS 2346
1099 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
1100 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1102 #define IEEE80211_24GHZ_MIN_CHANNEL 1
1103 #define IEEE80211_24GHZ_MAX_CHANNEL 14
1104 #define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1105 IEEE80211_24GHZ_MIN_CHANNEL + 1)
1107 #define IEEE80211_52GHZ_MIN_CHANNEL 34
1108 #define IEEE80211_52GHZ_MAX_CHANNEL 165
1109 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1110 IEEE80211_52GHZ_MIN_CHANNEL + 1)
1112 typedef struct tx_pending_t
{
1114 struct ieee80211_txb
*txb
;
1118 COUNTRY_CODE_FCC
= 0,
1119 COUNTRY_CODE_IC
= 1,
1120 COUNTRY_CODE_ETSI
= 2,
1121 COUNTRY_CODE_SPAIN
= 3,
1122 COUNTRY_CODE_FRANCE
= 4,
1123 COUNTRY_CODE_MKK
= 5,
1124 COUNTRY_CODE_MKK1
= 6,
1125 COUNTRY_CODE_ISRAEL
= 7,
1128 COUNTRY_CODE_GLOBAL_DOMAIN
1131 #include "ieee80211_r8192s.h"
1133 struct ieee80211_device
{
1134 struct net_device
*dev
;
1135 struct ieee80211_security sec
;
1137 /* hw security related */
1139 bool is_silent_reset
;
1142 bool bSupportRemoteWakeUp
;
1143 RT_PS_MODE dot11PowerSaveMode
;
1145 bool be_scan_inprogress
;
1147 RT_RF_POWER_STATE eRFPowerState
;
1152 PRT_HIGH_THROUGHPUT pHTInfo
;
1153 spinlock_t bw_spinlock
;
1155 spinlock_t reorder_spinlock
;
1157 * for HT operation rate set, we use this one for HT data rate to
1158 * seperate different descriptors the way fill this is the same as
1161 u8 Regdot11HTOperationalRateSet
[16]; /* use RATR format */
1162 u8 dot11HTOperationalRateSet
[16]; /* use RATR format */
1163 u8 RegHTSuppRateSet
[16];
1164 u8 HTCurrentOperaRate
;
1165 u8 HTHighestOperaRate
;
1166 /* for rate operation mode to firmware */
1167 u8 bTxDisableRateFallBack
;
1168 u8 bTxUseDriverAssingedRate
;
1169 atomic_t atm_chnlop
;
1172 /* 802.11e and WMM Traffic Stream Info (TX) */
1173 struct list_head Tx_TS_Admit_List
;
1174 struct list_head Tx_TS_Pending_List
;
1175 struct list_head Tx_TS_Unused_List
;
1176 TX_TS_RECORD TxTsRecord
[TOTAL_TS_NUM
];
1177 /* 802.11e and WMM Traffic Stream Info (RX) */
1178 struct list_head Rx_TS_Admit_List
;
1179 struct list_head Rx_TS_Pending_List
;
1180 struct list_head Rx_TS_Unused_List
;
1181 RX_TS_RECORD RxTsRecord
[TOTAL_TS_NUM
];
1183 RX_REORDER_ENTRY RxReorderEntry
[128];
1184 struct list_head RxReorder_Unused_List
;
1187 /* Force per-packet priority 1~7. (default: 0, not to force it.) */
1190 /* Bookkeeping structures */
1191 struct net_device_stats stats
;
1192 struct ieee80211_stats ieee_stats
;
1193 struct ieee80211_softmac_stats softmac_stats
;
1195 /* Probe / Beacon management */
1196 struct list_head network_free_list
;
1197 struct list_head network_list
;
1198 struct ieee80211_network
*networks
;
1202 int iw_mode
; /* operating mode (IW_MODE_*) */
1203 struct iw_spy_data spy_data
;
1206 spinlock_t wpax_suitlist_lock
;
1208 int tx_headroom
; /* Set to size of any additional room needed at front
1209 * of allocated Tx SKBs */
1212 /* WEP and other encryption related settings at the device level */
1213 int open_wep
; /* Set to 1 to allow unencrypted frames */
1215 int reset_on_keychange
; /* Set to 1 if the HW needs to be reset on
1216 * WEP key changes */
1218 /* If the host performs {en,de}cryption, then set to 1 */
1220 int host_encrypt_msdu
;
1222 /* host performs multicast decryption */
1223 int host_mc_decrypt
;
1225 /* host should strip IV and ICV from protected frames */
1226 /* meaningful only when hardware decryption is being used */
1227 int host_strip_iv_icv
;
1231 int ieee802_1x
; /* is IEEE 802.1X used */
1234 bool bHalfWirelessN24GMode
;
1236 int drop_unencrypted
;
1237 int tkip_countermeasures
;
1238 int privacy_invoked
;
1242 u16 pairwise_key_type
;
1244 struct list_head crypt_deinit_list
;
1245 struct ieee80211_crypt_data
*crypt
[WEP_KEYS
];
1246 int tx_keyidx
; /* default TX key index (crypt[tx_keyidx]) */
1247 struct timer_list crypt_deinit_timer
;
1250 int bcrx_sta_key
; /* use individual keys to override default keys even
1251 * with RX of broad/multicast frames */
1253 /* Fragmentation structures */
1254 // each streaming contain a entry
1255 struct ieee80211_frag_entry frag_cache
[17][IEEE80211_FRAG_CACHE_LEN
];
1256 unsigned int frag_next_idx
[17];
1257 u16 fts
; /* Fragmentation Threshold */
1258 #define DEFAULT_RTS_THRESHOLD 2346U
1259 #define MIN_RTS_THRESHOLD 1
1260 #define MAX_RTS_THRESHOLD 2346U
1261 u16 rts
; /* RTS threshold */
1263 /* Association info */
1266 /* This stores infos for the current network.
1267 * Either the network we are associated in INFRASTRUCTURE
1268 * or the network that we are creating in MASTER mode.
1269 * ad-hoc is a mixture ;-).
1270 * Note that in infrastructure mode, even when not associated,
1271 * fields bssid and essid may be valid (if wpa_set and essid_set
1272 * are true) as thy carry the value set by the user via iwconfig
1274 struct ieee80211_network current_network
;
1276 enum ieee80211_state state
;
1280 int mode
; /* A, B, G */
1281 int modulation
; /* CCK, OFDM */
1282 int freq_band
; /* 2.4Ghz, 5.2Ghz, Mixed */
1283 int abg_true
; /* ABG flag */
1285 /* used for forcing the ibss workqueue to terminate
1286 * without wait for the syncro scan to terminate
1288 short sync_scan_hurryup
;
1293 u16 prev_seq_ctl
; /* used to drop duplicate frames */
1296 * map of allowed channels. 0 is dummy, FIXME: remeber to default to
1297 * a basic channel plan depending of the PHY type
1301 int rate
; /* current rate */
1303 //FIXME: pleace callback, see if redundant with softmac_features
1306 /* this contains flags for selectively enable softmac support */
1307 u16 softmac_features
;
1309 /* if the sequence control field is not filled by HW */
1312 /* association procedure transaction sequence number */
1315 /* AID for RTXed association responses */
1318 /* power save mode related*/
1324 struct tasklet_struct ps_task
;
1329 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
1332 short proto_started
;
1334 struct semaphore wx_sem
;
1335 struct semaphore scan_sem
;
1337 spinlock_t mgmt_tx_lock
;
1338 spinlock_t beacon_lock
;
1345 u8 wpax_type_set
; //{added by David, 2006.9.28}
1346 u32 wpax_type_notify
; //{added by David, 2006.9.26}
1348 /* QoS related flag */
1349 char init_wmmparam_flag
;
1350 /* set on initialization */
1353 /* for discarding duplicated packets in IBSS */
1354 struct list_head ibss_mac_hash
[IEEE_IBSS_MAC_HASH_SIZE
];
1356 /* for discarding duplicated packets in BSS */
1357 u16 last_rxseq_num
[17]; /* rx seq previous per-tid */
1358 u16 last_rxfrag_num
[17];/* tx frag previous per-tid */
1359 unsigned long last_packet_time
[17];
1362 unsigned long last_rx_ps_time
;
1364 /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
1365 struct sk_buff
*mgmt_queue_ring
[MGMT_QUEUE_NUM
];
1366 int mgmt_queue_head
;
1367 int mgmt_queue_tail
;
1371 unsigned int hw_header
;
1372 struct sk_buff_head skb_waitQ
[MAX_QUEUE_SIZE
];
1373 struct sk_buff_head skb_aggQ
[MAX_QUEUE_SIZE
];
1374 struct sk_buff_head skb_drv_aggQ
[MAX_QUEUE_SIZE
];
1375 u32 sta_edca_param
[4];
1377 /* Enable/Disable Rx immediate BA capability. */
1378 bool enable_rx_imm_BA
;
1379 bool bibsscoordinator
;
1381 /* Dynamic Tx power for near/far range enable/disable. */
1382 bool bdynamic_txpower_enable
;
1384 bool bCTSToSelfEnable
;
1387 u32 fsync_time_interval
;
1388 u32 fsync_rate_bitmap
;
1389 u8 fsync_rssi_threshold
;
1392 u8 fsync_multiple_timeinterval
; /* value * FsyncTimeInterval */
1393 u32 fsync_firstdiff_ratethreshold
; /* low threshold */
1394 u32 fsync_seconddiff_ratethreshold
; /* decrease threshold */
1395 Fsync_State fsync_state
;
1396 bool bis_any_nonbepkts
;
1397 /* 20Mhz 40Mhz AutoSwitch Threshold */
1398 struct bandwidth_autoswitch bandwidth_auto_switch
;
1399 /* for txpower tracking */
1402 /* for AP roaming */
1403 struct rt_link_detect LinkDetectInfo
;
1405 struct rt_power_save_control PowerSaveControl
;
1408 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
1409 struct tx_pending_t tx_pending
;
1411 /* used if IEEE_SOFTMAC_ASSOCIATE is set */
1412 struct timer_list associate_timer
;
1414 /* used if IEEE_SOFTMAC_BEACONS is set */
1415 struct timer_list beacon_timer
;
1416 struct work_struct associate_complete_wq
;
1417 struct work_struct associate_procedure_wq
;
1418 struct delayed_work softmac_scan_wq
;
1419 struct delayed_work associate_retry_wq
;
1420 struct delayed_work start_ibss_wq
;
1421 struct delayed_work hw_wakeup_wq
;
1422 struct delayed_work hw_sleep_wq
;
1423 struct delayed_work link_change_wq
;
1424 struct work_struct wx_sync_scan_wq
;
1425 struct workqueue_struct
*wq
;
1427 /* Callback functions */
1428 void (*set_security
)(struct net_device
*dev
,
1429 struct ieee80211_security
*sec
);
1431 /* Used to TX data frame by using txb structs.
1432 * this is not used if in the softmac_features
1433 * is set the flag IEEE_SOFTMAC_TX_QUEUE
1435 int (*hard_start_xmit
)(struct ieee80211_txb
*txb
,
1436 struct net_device
*dev
);
1438 int (*reset_port
)(struct net_device
*dev
);
1439 int (*is_queue_full
)(struct net_device
*dev
, int pri
);
1441 int (*handle_management
)(struct net_device
*dev
,
1442 struct ieee80211_network
*network
, u16 type
);
1443 int (*is_qos_active
)(struct net_device
*dev
, struct sk_buff
*skb
);
1445 /* Softmac-generated frames (mamagement) are TXed via this
1446 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
1447 * not set. As some cards may have different HW queues that
1448 * one might want to use for data and management frames
1449 * the option to have two callbacks might be useful.
1450 * This fucntion can't sleep.
1452 int (*softmac_hard_start_xmit
)(struct sk_buff
*skb
,
1453 struct net_device
*dev
);
1455 /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
1456 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
1457 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
1458 * then also management frames are sent via this callback.
1459 * This function can't sleep.
1461 void (*softmac_data_hard_start_xmit
)(struct sk_buff
*skb
,
1462 struct net_device
*dev
,int rate
);
1464 /* stops the HW queue for DATA frames. Useful to avoid
1465 * waste time to TX data frame when we are reassociating
1466 * This function can sleep.
1468 void (*data_hard_stop
)(struct net_device
*dev
);
1470 /* OK this is complementar to data_poll_hard_stop */
1471 void (*data_hard_resume
)(struct net_device
*dev
);
1473 /* ask to the driver to retune the radio .
1474 * This function can sleep. the driver should ensure
1475 * the radio has been swithced before return.
1477 void (*set_chan
)(struct net_device
*dev
,short ch
);
1479 /* These are not used if the ieee stack takes care of
1480 * scanning (IEEE_SOFTMAC_SCAN feature set).
1481 * In this case only the set_chan is used.
1483 * The syncro version is similar to the start_scan but
1484 * does not return until all channels has been scanned.
1485 * this is called in user context and should sleep,
1486 * it is called in a work_queue when swithcing to ad-hoc mode
1487 * or in behalf of iwlist scan when the card is associated
1488 * and root user ask for a scan.
1489 * the fucntion stop_scan should stop both the syncro and
1490 * background scanning and can sleep.
1491 * The fucntion start_scan should initiate the background
1492 * scanning and can't sleep.
1494 void (*scan_syncro
)(struct net_device
*dev
);
1495 void (*start_scan
)(struct net_device
*dev
);
1496 void (*stop_scan
)(struct net_device
*dev
);
1498 /* indicate the driver that the link state is changed
1499 * for example it may indicate the card is associated now.
1500 * Driver might be interested in this to apply RX filter
1501 * rules or simply light the LINK led
1503 void (*link_change
)(struct net_device
*dev
);
1505 /* these two function indicates to the HW when to start
1506 * and stop to send beacons. This is used when the
1507 * IEEE_SOFTMAC_BEACONS is not set. For now the
1508 * stop_send_bacons is NOT guaranteed to be called only
1509 * after start_send_beacons.
1511 void (*start_send_beacons
) (struct net_device
*dev
);
1512 void (*stop_send_beacons
) (struct net_device
*dev
);
1514 /* power save mode related */
1515 void (*sta_wake_up
) (struct net_device
*dev
);
1516 void (*enter_sleep_state
) (struct net_device
*dev
, u32 th
, u32 tl
);
1517 short (*ps_is_queue_empty
) (struct net_device
*dev
);
1519 int (*handle_beacon
)(struct net_device
*dev
,
1520 struct ieee80211_probe_response
*beacon
,
1521 struct ieee80211_network
*network
);
1522 int (*handle_assoc_response
)(struct net_device
*dev
,
1523 struct ieee80211_assoc_response_frame
*resp
,
1524 struct ieee80211_network
*network
);
1526 /* check whether Tx hw resouce available */
1527 short (*check_nic_enough_desc
)(struct net_device
*dev
, int queue_index
);
1529 void (*SetBWModeHandler
)(struct net_device
*dev
,
1530 HT_CHANNEL_WIDTH Bandwidth
,
1531 HT_EXTCHNL_OFFSET Offset
);
1532 bool (*GetNmodeSupportBySecCfg
)(struct net_device
* dev
);
1533 void (*SetWirelessMode
)(struct net_device
* dev
, u8 wireless_mode
);
1534 bool (*GetHalfNmodeSupportByAPsHandler
)(struct net_device
* dev
);
1535 bool (*is_ap_in_wep_tkip
)(struct net_device
* dev
);
1536 void (*InitialGainHandler
)(struct net_device
*dev
, u8 Operation
);
1537 bool (*SetFwCmdHandler
)(struct net_device
*dev
, FW_CMD_IO_TYPE FwCmdIO
);
1538 void (*LedControlHandler
)(struct net_device
*dev
,
1539 LED_CTL_MODE LedAction
);
1540 /* This must be the last item so that it points to the data
1541 * allocated beyond this structure by alloc_ieee80211 */
1545 #define IEEE_A (1<<0)
1546 #define IEEE_B (1<<1)
1547 #define IEEE_G (1<<2)
1548 #define IEEE_N_24G (1<<4)
1549 #define IEEE_N_5G (1<<5)
1550 #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
1552 /* Generate a 802.11 header */
1554 /* Uses the channel change callback directly
1555 * instead of [start/stop] scan callbacks
1557 #define IEEE_SOFTMAC_SCAN (1<<2)
1559 /* Perform authentication and association handshake */
1560 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
1562 /* Generate probe requests */
1563 #define IEEE_SOFTMAC_PROBERQ (1<<4)
1565 /* Generate respones to probe requests */
1566 #define IEEE_SOFTMAC_PROBERS (1<<5)
1568 /* The ieee802.11 stack will manages the netif queue
1569 * wake/stop for the driver, taking care of 802.11
1570 * fragmentation. See softmac.c for details. */
1571 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
1573 /* Uses only the softmac_data_hard_start_xmit
1574 * even for TX management frames.
1576 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
1578 /* Generate beacons. The stack will enqueue beacons
1581 #define IEEE_SOFTMAC_BEACONS (1<<6)
1583 static inline void *ieee80211_priv(struct net_device
*dev
)
1585 return ((struct ieee80211_device
*)netdev_priv(dev
))->priv
;
1588 extern inline int ieee80211_is_empty_essid(const char *essid
, int essid_len
)
1590 /* Single white space is for Linksys APs */
1591 if (essid_len
== 1 && essid
[0] == ' ')
1594 /* Otherwise, if the entire essid is 0, we assume it is hidden */
1597 if (essid
[essid_len
] != '\0')
1604 extern inline int ieee80211_is_valid_mode(struct ieee80211_device
*ieee
, int mode
)
1607 * It is possible for both access points and our device to support
1608 * combinations of modes, so as long as there is one valid combination
1609 * of ap/device supported modes, then return success
1612 if ((mode
& IEEE_A
) &&
1613 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
1614 (ieee
->freq_band
& IEEE80211_52GHZ_BAND
))
1617 if ((mode
& IEEE_G
) &&
1618 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
1619 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
1622 if ((mode
& IEEE_B
) &&
1623 (ieee
->modulation
& IEEE80211_CCK_MODULATION
) &&
1624 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
1630 extern inline int ieee80211_get_hdrlen(u16 fc
)
1632 int hdrlen
= IEEE80211_3ADDR_LEN
;
1634 switch (WLAN_FC_GET_TYPE(fc
)) {
1635 case IEEE80211_FTYPE_DATA
:
1636 if ((fc
& IEEE80211_FCTL_FROMDS
) && (fc
& IEEE80211_FCTL_TODS
))
1637 hdrlen
= IEEE80211_4ADDR_LEN
; /* Addr4 */
1638 if(IEEE80211_QOS_HAS_SEQ(fc
))
1639 hdrlen
+= 2; /* QOS ctrl*/
1641 case IEEE80211_FTYPE_CTL
:
1642 switch (WLAN_FC_GET_STYPE(fc
)) {
1643 case IEEE80211_STYPE_CTS
:
1644 case IEEE80211_STYPE_ACK
:
1645 hdrlen
= IEEE80211_1ADDR_LEN
;
1648 hdrlen
= IEEE80211_2ADDR_LEN
;
1657 static inline u8
*ieee80211_get_payload(struct rtl_ieee80211_hdr
*hdr
)
1659 switch (ieee80211_get_hdrlen(le16_to_cpu(hdr
->frame_ctl
))) {
1660 case IEEE80211_1ADDR_LEN
:
1661 return ((struct ieee80211_hdr_1addr
*)hdr
)->payload
;
1662 case IEEE80211_2ADDR_LEN
:
1663 return ((struct ieee80211_hdr_2addr
*)hdr
)->payload
;
1664 case IEEE80211_3ADDR_LEN
:
1665 return (void *)hdr
+sizeof(struct ieee80211_hdr_3addr
);
1666 case IEEE80211_4ADDR_LEN
:
1667 return ((struct ieee80211_hdr_4addr
*)hdr
)->payload
;
1672 static inline int ieee80211_is_ofdm_rate(u8 rate
)
1674 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
1675 case IEEE80211_OFDM_RATE_6MB
:
1676 case IEEE80211_OFDM_RATE_9MB
:
1677 case IEEE80211_OFDM_RATE_12MB
:
1678 case IEEE80211_OFDM_RATE_18MB
:
1679 case IEEE80211_OFDM_RATE_24MB
:
1680 case IEEE80211_OFDM_RATE_36MB
:
1681 case IEEE80211_OFDM_RATE_48MB
:
1682 case IEEE80211_OFDM_RATE_54MB
:
1688 static inline int ieee80211_is_cck_rate(u8 rate
)
1690 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
1691 case IEEE80211_CCK_RATE_1MB
:
1692 case IEEE80211_CCK_RATE_2MB
:
1693 case IEEE80211_CCK_RATE_5MB
:
1694 case IEEE80211_CCK_RATE_11MB
:
1702 extern void free_ieee80211(struct net_device
*dev
);
1703 extern struct net_device
*alloc_ieee80211(int sizeof_priv
);
1705 extern int ieee80211_set_encryption(struct ieee80211_device
*ieee
);
1707 /* ieee80211_tx.c */
1709 extern int ieee80211_encrypt_fragment(
1710 struct ieee80211_device
*ieee
,
1711 struct sk_buff
*frag
,
1714 extern int rtl8192_ieee80211_xmit(struct sk_buff
*skb
,
1715 struct net_device
*dev
);
1716 extern void ieee80211_txb_free(struct ieee80211_txb
*);
1719 /* ieee80211_rx.c */
1720 extern int ieee80211_rx(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
1721 struct ieee80211_rx_stats
*rx_stats
);
1722 extern void ieee80211_rx_mgt(struct ieee80211_device
*ieee
,
1723 struct ieee80211_hdr_4addr
*header
,
1724 struct ieee80211_rx_stats
*stats
);
1726 /* ieee80211_wx.c */
1727 extern int ieee80211_wx_get_scan(struct ieee80211_device
*ieee
,
1728 struct iw_request_info
*info
,
1729 union iwreq_data
*wrqu
, char *key
);
1730 extern int ieee80211_wx_set_encode(struct ieee80211_device
*ieee
,
1731 struct iw_request_info
*info
,
1732 union iwreq_data
*wrqu
, char *key
);
1733 extern int ieee80211_wx_get_encode(struct ieee80211_device
*ieee
,
1734 struct iw_request_info
*info
,
1735 union iwreq_data
*wrqu
, char *key
);
1736 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device
*ieee
,
1737 struct iw_request_info
*info
,
1738 union iwreq_data
* wrqu
, char *extra
);
1739 extern int ieee80211_wx_set_auth(struct ieee80211_device
*ieee
,
1740 struct iw_request_info
*info
,
1741 struct iw_param
*data
, char *extra
);
1742 extern int ieee80211_wx_set_mlme(struct ieee80211_device
*ieee
,
1743 struct iw_request_info
*info
,
1744 union iwreq_data
*wrqu
, char *extra
);
1745 extern int ieee80211_wx_set_gen_ie(struct ieee80211_device
*ieee
, u8
*ie
, size_t len
);
1747 /* ieee80211_softmac.c */
1748 extern short ieee80211_is_54g(struct ieee80211_network net
);
1749 extern short ieee80211_is_shortslot(struct ieee80211_network net
);
1750 extern int ieee80211_rx_frame_softmac(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
1751 struct ieee80211_rx_stats
*rx_stats
, u16 type
,
1753 extern void ieee80211_softmac_new_net(struct ieee80211_device
*ieee
, struct ieee80211_network
*net
);
1755 void SendDisassociation(struct ieee80211_device
*ieee
, u8
* asSta
, u8 asRsn
);
1756 extern void ieee80211_softmac_xmit(struct ieee80211_txb
*txb
, struct ieee80211_device
*ieee
);
1758 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
1759 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
1760 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device
*ieee
);
1761 extern void ieee80211_start_bss(struct ieee80211_device
*ieee
);
1762 extern void ieee80211_start_master_bss(struct ieee80211_device
*ieee
);
1763 extern void ieee80211_start_ibss(struct ieee80211_device
*ieee
);
1764 extern void ieee80211_softmac_init(struct ieee80211_device
*ieee
);
1765 extern void ieee80211_softmac_free(struct ieee80211_device
*ieee
);
1766 extern void ieee80211_associate_abort(struct ieee80211_device
*ieee
);
1767 extern void ieee80211_disassociate(struct ieee80211_device
*ieee
);
1768 extern void ieee80211_stop_scan(struct ieee80211_device
*ieee
);
1769 extern void ieee80211_start_scan_syncro(struct ieee80211_device
*ieee
);
1770 extern void ieee80211_check_all_nets(struct ieee80211_device
*ieee
);
1771 extern void ieee80211_start_protocol(struct ieee80211_device
*ieee
);
1772 extern void ieee80211_stop_protocol(struct ieee80211_device
*ieee
);
1773 extern void ieee80211_softmac_start_protocol(struct ieee80211_device
*ieee
);
1774 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device
*ieee
);
1775 extern void ieee80211_reset_queue(struct ieee80211_device
*ieee
);
1776 extern void ieee80211_wake_queue(struct ieee80211_device
*ieee
);
1777 extern void ieee80211_stop_queue(struct ieee80211_device
*ieee
);
1778 extern struct sk_buff
*ieee80211_get_beacon(struct ieee80211_device
*ieee
);
1779 extern void ieee80211_start_send_beacons(struct ieee80211_device
*ieee
);
1780 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
1781 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device
*ieee
, struct iw_point
*p
);
1782 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
1783 extern void ieee80211_ps_tx_ack(struct ieee80211_device
*ieee
, short success
);
1785 extern void softmac_mgmt_xmit(struct sk_buff
*skb
, struct ieee80211_device
*ieee
);
1787 /* ieee80211_crypt_ccmp&tkip&wep.c */
1788 extern void ieee80211_tkip_null(void);
1789 extern void ieee80211_wep_null(void);
1790 extern void ieee80211_ccmp_null(void);
1792 /* ieee80211_softmac_wx.c */
1794 extern int ieee80211_wx_get_wap(struct ieee80211_device
*ieee
,
1795 struct iw_request_info
*info
,
1796 union iwreq_data
*wrqu
, char *ext
);
1798 extern int ieee80211_wx_set_wap(struct ieee80211_device
*ieee
,
1799 struct iw_request_info
*info
,
1800 union iwreq_data
*awrq
,
1803 extern int ieee80211_wx_get_essid(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,union iwreq_data
*wrqu
,char *b
);
1805 extern int ieee80211_wx_set_rate(struct ieee80211_device
*ieee
,
1806 struct iw_request_info
*info
,
1807 union iwreq_data
*wrqu
, char *extra
);
1809 extern int ieee80211_wx_get_rate(struct ieee80211_device
*ieee
,
1810 struct iw_request_info
*info
,
1811 union iwreq_data
*wrqu
, char *extra
);
1813 extern int ieee80211_wx_set_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1814 union iwreq_data
*wrqu
, char *b
);
1816 extern int ieee80211_wx_set_scan(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1817 union iwreq_data
*wrqu
, char *b
);
1819 extern int ieee80211_wx_set_essid(struct ieee80211_device
*ieee
,
1820 struct iw_request_info
*a
,
1821 union iwreq_data
*wrqu
, char *extra
);
1823 extern int ieee80211_wx_get_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1824 union iwreq_data
*wrqu
, char *b
);
1826 extern int ieee80211_wx_set_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1827 union iwreq_data
*wrqu
, char *b
);
1829 extern int ieee80211_wx_get_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
1830 union iwreq_data
*wrqu
, char *b
);
1832 extern void ieee80211_wx_sync_scan_wq(struct work_struct
*work
);
1834 extern int ieee80211_wx_set_rawtx(struct ieee80211_device
*ieee
,
1835 struct iw_request_info
*info
,
1836 union iwreq_data
*wrqu
, char *extra
);
1838 extern int ieee80211_wx_get_name(struct ieee80211_device
*ieee
,
1839 struct iw_request_info
*info
,
1840 union iwreq_data
*wrqu
, char *extra
);
1842 extern int ieee80211_wx_set_power(struct ieee80211_device
*ieee
,
1843 struct iw_request_info
*info
,
1844 union iwreq_data
*wrqu
, char *extra
);
1846 extern int ieee80211_wx_get_power(struct ieee80211_device
*ieee
,
1847 struct iw_request_info
*info
,
1848 union iwreq_data
*wrqu
, char *extra
);
1850 extern int ieee80211_wx_set_rts(struct ieee80211_device
*ieee
,
1851 struct iw_request_info
*info
,
1852 union iwreq_data
*wrqu
, char *extra
);
1854 extern int ieee80211_wx_get_rts(struct ieee80211_device
*ieee
,
1855 struct iw_request_info
*info
,
1856 union iwreq_data
*wrqu
, char *extra
);
1858 extern void ieee80211_softmac_scan_syncro(struct ieee80211_device
*ieee
);
1860 extern const long ieee80211_wlan_frequencies
[];
1862 extern inline void ieee80211_increment_scans(struct ieee80211_device
*ieee
)
1867 extern inline int ieee80211_get_scans(struct ieee80211_device
*ieee
)
1872 static inline const char *escape_essid(const char *essid
, u8 essid_len
) {
1873 static char escaped
[IW_ESSID_MAX_SIZE
* 2 + 1];
1874 const char *s
= essid
;
1877 if (ieee80211_is_empty_essid(essid
, essid_len
)) {
1878 memcpy(escaped
, "<hidden>", sizeof("<hidden>"));
1882 essid_len
= min(essid_len
, (u8
)IW_ESSID_MAX_SIZE
);
1883 while (essid_len
--) {
1896 /* For the function is more related to hardware setting, it's better to use the
1897 * ieee handler to refer to it.
1899 extern short check_nic_enough_desc(struct net_device
*dev
, int queue_index
);
1900 extern int ieee80211_data_xmit(struct sk_buff
*skb
, struct net_device
*dev
);
1901 extern int ieee80211_parse_info_param(struct ieee80211_device
*ieee
,
1902 struct ieee80211_info_element
*info_element
,
1904 struct ieee80211_network
*network
,
1905 struct ieee80211_rx_stats
*stats
);
1907 extern void ieee80211_indicate_packets(struct ieee80211_device
*ieee
,
1908 struct ieee80211_rxb
**prxbIndicateArray
,
1910 #define RT_ASOC_RETRY_LIMIT 5
1911 #endif /* IEEE80211_H */