drivers/net/usb/zaurus.c

   1 /*
   2  * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
   3  * Copyright (C) 2002-2005 by David Brownell
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18  */
  19
  20 // #define      DEBUG                   // error path messages, extra info
  21 // #define      VERBOSE                 // more; success messages
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/netdevice.h>
  26 #include <linux/ethtool.h>
  27 #include <linux/workqueue.h>
  28 #include <linux/mii.h>
  29 #include <linux/crc32.h>
  30 #include <linux/usb.h>
  31 #include <linux/usb/cdc.h>
  32 #include <linux/usb/usbnet.h>
  33
  34
  35 /*
  36  * All known Zaurii lie about their standards conformance.  At least
  37  * the earliest SA-1100 models lie by saying they support CDC Ethernet.
  38  * Some later models (especially PXA-25x and PXA-27x based ones) lie
  39  * and say they support CDC MDLM (for access to cell phone modems).
  40  *
  41  * There are non-Zaurus products that use these same protocols too.
  42  *
  43  * The annoying thing is that at the same time Sharp was developing
  44  * that annoying standards-breaking software, the Linux community had
  45  * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
  46  * That is, the same functionality but not violating standards.
  47  *
  48  * The CDC Ethernet nonconformance points are troublesome to hosts
  49  * with a true CDC Ethernet implementation:
  50  *   - Framing appends a CRC, which the spec says drivers "must not" do;
  51  *   - Transfers data in altsetting zero, instead of altsetting 1;
  52  *   - All these peripherals use the same ethernet address.
  53  *
  54  * The CDC MDLM nonconformance is less immediately troublesome, since all
  55  * MDLM implementations are quasi-proprietary anyway.
  56  */
  57
  58 static struct sk_buff *
  59 zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
  60 {
  61         int                     padlen;
  62         struct sk_buff          *skb2;
  63
  64         padlen = 2;
  65         if (!skb_cloned(skb)) {
  66                 int     tailroom = skb_tailroom(skb);
  67                 if ((padlen + 4) <= tailroom)
  68                         goto done;
  69         }
  70         skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
  71         dev_kfree_skb_any(skb);
  72         skb = skb2;
  73         if (skb) {
  74                 u32             fcs;
  75 done:
  76                 fcs = crc32_le(~0, skb->data, skb->len);
  77                 fcs = ~fcs;
  78
  79                 *skb_put (skb, 1) = fcs       & 0xff;
  80                 *skb_put (skb, 1) = (fcs>> 8) & 0xff;
  81                 *skb_put (skb, 1) = (fcs>>16) & 0xff;
  82                 *skb_put (skb, 1) = (fcs>>24) & 0xff;
  83         }
  84         return skb;
  85 }
  86
  87 static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
  88 {
  89         /* Belcarra's funky framing has other options; mostly
  90          * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
  91          */
  92         dev->net->hard_header_len += 6;
  93         dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
  94         return usbnet_generic_cdc_bind(dev, intf);
  95 }
  96
  97 /* PDA style devices are always connected if present */
  98 static int always_connected (struct usbnet *dev)
  99 {
 100         return 0;
 101 }
 102
 103 static const struct driver_info zaurus_sl5x00_info = {
 104         .description =  "Sharp Zaurus SL-5x00",
 105         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 106         .check_connect = always_connected,
 107         .bind =         zaurus_bind,
 108         .unbind =       usbnet_cdc_unbind,
 109         .tx_fixup =     zaurus_tx_fixup,
 110 };
 111 #define ZAURUS_STRONGARM_INFO   ((unsigned long)&zaurus_sl5x00_info)
 112
 113 static const struct driver_info zaurus_pxa_info = {
 114         .description =  "Sharp Zaurus, PXA-2xx based",
 115         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 116         .check_connect = always_connected,
 117         .bind =         zaurus_bind,
 118         .unbind =       usbnet_cdc_unbind,
 119         .tx_fixup =     zaurus_tx_fixup,
 120 };
 121 #define ZAURUS_PXA_INFO         ((unsigned long)&zaurus_pxa_info)
 122
 123 static const struct driver_info olympus_mxl_info = {
 124         .description =  "Olympus R1000",
 125         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 126         .check_connect = always_connected,
 127         .bind =         zaurus_bind,
 128         .unbind =       usbnet_cdc_unbind,
 129         .tx_fixup =     zaurus_tx_fixup,
 130 };
 131 #define OLYMPUS_MXL_INFO        ((unsigned long)&olympus_mxl_info)
 132
 133
 134 /* Some more recent products using Lineo/Belcarra code will wrongly claim
 135  * CDC MDLM conformance.  They aren't conformant:  data endpoints live
 136  * in the control interface, there's no data interface, and it's not used
 137  * to talk to a cell phone radio.  But at least we can detect these two
 138  * pseudo-classes, rather than growing this product list with entries for
 139  * each new nonconformant product (sigh).
 140  */
 141 static const u8 safe_guid[16] = {
 142         0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
 143         0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
 144 };
 145 static const u8 blan_guid[16] = {
 146         0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
 147         0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
 148 };
 149
 150 static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
 151 {
 152         u8                              *buf = intf->cur_altsetting->extra;
 153         int                             len = intf->cur_altsetting->extralen;
 154         struct usb_cdc_mdlm_desc        *desc = NULL;
 155         struct usb_cdc_mdlm_detail_desc *detail = NULL;
 156
 157         while (len > 3) {
 158                 if (buf [1] != USB_DT_CS_INTERFACE)
 159                         goto next_desc;
 160
 161                 /* use bDescriptorSubType, and just verify that we get a
 162                  * "BLAN" (or "SAFE") descriptor.
 163                  */
 164                 switch (buf [2]) {
 165                 case USB_CDC_MDLM_TYPE:
 166                         if (desc) {
 167                                 dev_dbg(&intf->dev, "extra MDLM\n");
 168                                 goto bad_desc;
 169                         }
 170                         desc = (void *) buf;
 171                         if (desc->bLength != sizeof *desc) {
 172                                 dev_dbg(&intf->dev, "MDLM len %u\n",
 173                                         desc->bLength);
 174                                 goto bad_desc;
 175                         }
 176                         /* expect bcdVersion 1.0, ignore */
 177                         if (memcmp(&desc->bGUID, blan_guid, 16) &&
 178                             memcmp(&desc->bGUID, safe_guid, 16)) {
 179                                 /* hey, this one might _really_ be MDLM! */
 180                                 dev_dbg(&intf->dev, "MDLM guid\n");
 181                                 goto bad_desc;
 182                         }
 183                         break;
 184                 case USB_CDC_MDLM_DETAIL_TYPE:
 185                         if (detail) {
 186                                 dev_dbg(&intf->dev, "extra MDLM detail\n");
 187                                 goto bad_desc;
 188                         }
 189                         detail = (void *) buf;
 190                         switch (detail->bGuidDescriptorType) {
 191                         case 0:                 /* "SAFE" */
 192                                 if (detail->bLength != (sizeof *detail + 2))
 193                                         goto bad_detail;
 194                                 break;
 195                         case 1:                 /* "BLAN" */
 196                                 if (detail->bLength != (sizeof *detail + 3))
 197                                         goto bad_detail;
 198                                 break;
 199                         default:
 200                                 goto bad_detail;
 201                         }
 202
 203                         /* assuming we either noticed BLAN already, or will
 204                          * find it soon, there are some data bytes here:
 205                          *  - bmNetworkCapabilities (unused)
 206                          *  - bmDataCapabilities (bits, see below)
 207                          *  - bPad (ignored, for PADAFTER -- BLAN-only)
 208                          * bits are:
 209                          *  - 0x01 -- Zaurus framing (add CRC)
 210                          *  - 0x02 -- PADBEFORE (CRC includes some padding)
 211                          *  - 0x04 -- PADAFTER (some padding after CRC)
 212                          *  - 0x08 -- "fermat" packet mangling (for hw bugs)
 213                          * the PADBEFORE appears not to matter; we interop
 214                          * with devices that use it and those that don't.
 215                          */
 216                         if ((detail->bDetailData[1] & ~0x02) != 0x01) {
 217                                 /* bmDataCapabilities == 0 would be fine too,
 218                                  * but framing is minidriver-coupled for now.
 219                                  */
 220 bad_detail:
 221                                 dev_dbg(&intf->dev,
 222                                                 "bad MDLM detail, %d %d %d\n",
 223                                                 detail->bLength,
 224                                                 detail->bDetailData[0],
 225                                                 detail->bDetailData[2]);
 226                                 goto bad_desc;
 227                         }
 228
 229                         /* same extra framing as for non-BLAN mode */
 230                         dev->net->hard_header_len += 6;
 231                         dev->rx_urb_size = dev->net->hard_header_len
 232                                         + dev->net->mtu;
 233                         break;
 234                 }
 235 next_desc:
 236                 len -= buf [0]; /* bLength */
 237                 buf += buf [0];
 238         }
 239
 240         if (!desc || !detail) {
 241                 dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
 242                         desc ? "" : "func ",
 243                         detail ? "" : "detail ");
 244                 goto bad_desc;
 245         }
 246
 247         /* There's probably a CDC Ethernet descriptor there, but we can't
 248          * rely on the Ethernet address it provides since not all vendors
 249          * bother to make it unique.  Likewise there's no point in tracking
 250          * of the CDC event notifications.
 251          */
 252         return usbnet_get_endpoints(dev, intf);
 253
 254 bad_desc:
 255         dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
 256         return -ENODEV;
 257 }
 258
 259 static const struct driver_info bogus_mdlm_info = {
 260         .description =  "pseudo-MDLM (BLAN) device",
 261         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 262         .check_connect = always_connected,
 263         .tx_fixup =     zaurus_tx_fixup,
 264         .bind =         blan_mdlm_bind,
 265 };
 266
 267 static const struct usb_device_id       products [] = {
 268 #define ZAURUS_MASTER_INTERFACE \
 269         .bInterfaceClass        = USB_CLASS_COMM, \
 270         .bInterfaceSubClass     = USB_CDC_SUBCLASS_ETHERNET, \
 271         .bInterfaceProtocol     = USB_CDC_PROTO_NONE
 272
 273 /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
 274 {
 275         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 276                           | USB_DEVICE_ID_MATCH_DEVICE,
 277         .idVendor               = 0x04DD,
 278         .idProduct              = 0x8004,
 279         ZAURUS_MASTER_INTERFACE,
 280         .driver_info = ZAURUS_STRONGARM_INFO,
 281 },
 282
 283 /* PXA-2xx based models are also lying-about-cdc.  If you add any
 284  * more devices that claim to be CDC Ethernet, make sure they get
 285  * added to the blacklist in cdc_ether too.
 286  *
 287  * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
 288  * unlike the older ones with 2.4 "embedix" kernels.
 289  */
 290 {
 291         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 292                           | USB_DEVICE_ID_MATCH_DEVICE,
 293         .idVendor               = 0x04DD,
 294         .idProduct              = 0x8005,       /* A-300 */
 295         ZAURUS_MASTER_INTERFACE,
 296         .driver_info = ZAURUS_PXA_INFO,
 297 }, {
 298         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 299                           | USB_DEVICE_ID_MATCH_DEVICE,
 300         .idVendor               = 0x04DD,
 301         .idProduct              = 0x8006,       /* B-500/SL-5600 */
 302         ZAURUS_MASTER_INTERFACE,
 303         .driver_info = ZAURUS_PXA_INFO,
 304 }, {
 305         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 306                   | USB_DEVICE_ID_MATCH_DEVICE,
 307         .idVendor               = 0x04DD,
 308         .idProduct              = 0x8007,       /* C-700 */
 309         ZAURUS_MASTER_INTERFACE,
 310         .driver_info = ZAURUS_PXA_INFO,
 311 }, {
 312         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 313                  | USB_DEVICE_ID_MATCH_DEVICE,
 314         .idVendor               = 0x04DD,
 315         .idProduct              = 0x9031,       /* C-750 C-760 */
 316         ZAURUS_MASTER_INTERFACE,
 317         .driver_info = ZAURUS_PXA_INFO,
 318 }, {
 319         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 320                  | USB_DEVICE_ID_MATCH_DEVICE,
 321         .idVendor               = 0x04DD,
 322         .idProduct              = 0x9032,       /* SL-6000 */
 323         ZAURUS_MASTER_INTERFACE,
 324         .driver_info = ZAURUS_PXA_INFO,
 325 }, {
 326         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 327                  | USB_DEVICE_ID_MATCH_DEVICE,
 328         .idVendor               = 0x04DD,
 329         /* reported with some C860 units */
 330         .idProduct              = 0x9050,       /* C-860 */
 331         ZAURUS_MASTER_INTERFACE,
 332         .driver_info = ZAURUS_PXA_INFO,
 333 },
 334 {
 335         /* Motorola MOTOMAGX phones */
 336         USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
 337                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 338         .driver_info = (unsigned long) &bogus_mdlm_info,
 339 },
 340
 341 /* Olympus has some models with a Zaurus-compatible option.
 342  * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
 343  */
 344 {
 345         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 346                  | USB_DEVICE_ID_MATCH_DEVICE,
 347         .idVendor               = 0x07B4,
 348         .idProduct              = 0x0F02,       /* R-1000 */
 349         ZAURUS_MASTER_INTERFACE,
 350         .driver_info = OLYMPUS_MXL_INFO,
 351 },
 352         { },            // END
 353 };
 354 MODULE_DEVICE_TABLE(usb, products);
 355
 356 static struct usb_driver zaurus_driver = {
 357         .name =         "zaurus",
 358         .id_table =     products,
 359         .probe =        usbnet_probe,
 360         .disconnect =   usbnet_disconnect,
 361         .suspend =      usbnet_suspend,
 362         .resume =       usbnet_resume,
 363 };
 364
 365 static int __init zaurus_init(void)
 366 {
 367         return usb_register(&zaurus_driver);
 368 }
 369 module_init(zaurus_init);
 370
 371 static void __exit zaurus_exit(void)
 372 {
 373         usb_deregister(&zaurus_driver);
 374 }
 375 module_exit(zaurus_exit);
 376
 377 MODULE_AUTHOR("Pavel Machek, David Brownell");
 378 MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
 379 MODULE_LICENSE("GPL");